w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- and Mark Studebaker <mdsxyz123@yahoo.com>
+ Philip Edelbrock <phil@netroedge.com>,
+ and Mark Studebaker <mdsxyz123@yahoo.com>
+ Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
+#include <linux/sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
+/* ISA device, if found */
+static struct platform_device *pdev;
+
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
a bit - except if there could be more than one SMBus. Groan. No solution
for this yet. */
-/* This module may seem overly long and complicated. In fact, it is not so
- bad. Quite a lot of bookkeeping is done. A real driver can often cut
- some corners. */
-
-/* For each registered W83781D, we need to keep some data in memory. That
- data is pointed to by w83781d_list[NR]->data. The structure itself is
- dynamically allocated, at the same time when a new w83781d client is
- allocated. */
+/* For ISA chips, we abuse the i2c_client addr and name fields. We also use
+ the driver field to differentiate between I2C and ISA chips. */
struct w83781d_data {
struct i2c_client client;
struct class_device *class_dev;
};
static int w83781d_attach_adapter(struct i2c_adapter *adapter);
-static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter);
static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
static int w83781d_detach_client(struct i2c_client *client);
+static int __devinit w83781d_isa_probe(struct platform_device *pdev);
+static int __devexit w83781d_isa_remove(struct platform_device *pdev);
+
static int w83781d_read_value(struct i2c_client *client, u16 reg);
static int w83781d_write_value(struct i2c_client *client, u16 reg, u16 value);
static struct w83781d_data *w83781d_update_device(struct device *dev);
-static void w83781d_init_client(struct i2c_client *client);
+static void w83781d_init_device(struct device *dev);
static struct i2c_driver w83781d_driver = {
.driver = {
.detach_client = w83781d_detach_client,
};
-static struct i2c_driver w83781d_isa_driver = {
+static struct platform_driver w83781d_isa_driver = {
.driver = {
.owner = THIS_MODULE,
- .name = "w83781d-isa",
+ .name = "w83781d",
},
- .attach_adapter = w83781d_isa_attach_adapter,
- .detach_client = w83781d_detach_client,
+ .probe = w83781d_isa_probe,
+ .remove = w83781d_isa_remove,
};
#define store_in_reg(REG, reg) \
static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83781d_data *data = i2c_get_clientdata(client); \
+ struct w83781d_data *data = dev_get_drvdata(dev); \
+ struct i2c_client *client = &data->client; \
u32 val; \
\
val = simple_strtoul(buf, NULL, 10) / 10; \
sysfs_in_offsets(7);
sysfs_in_offsets(8);
-#define device_create_file_in(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_in##offset##_input); \
-device_create_file(&client->dev, &dev_attr_in##offset##_min); \
-device_create_file(&client->dev, &dev_attr_in##offset##_max); \
-} while (0)
-
#define show_fan_reg(reg) \
static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
{ \
static ssize_t
store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
u32 val;
val = simple_strtoul(buf, NULL, 10);
sysfs_fan_offset(3);
sysfs_fan_min_offset(3);
-#define device_create_file_fan(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
-device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
-} while (0)
-
#define show_temp_reg(reg) \
static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
{ \
#define store_temp_reg(REG, reg) \
static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83781d_data *data = i2c_get_clientdata(client); \
+ struct w83781d_data *data = dev_get_drvdata(dev); \
+ struct i2c_client *client = &data->client; \
s32 val; \
\
val = simple_strtol(buf, NULL, 10); \
sysfs_temp_offsets(2);
sysfs_temp_offsets(3);
-#define device_create_file_temp(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
-device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
-device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
-} while (0)
-
static ssize_t
show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
}
-static
-DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
-#define device_create_file_vid(client) \
-device_create_file(&client->dev, &dev_attr_cpu0_vid);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
static ssize_t
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
u32 val;
val = simple_strtoul(buf, NULL, 10);
return count;
}
-static
-DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
-#define device_create_file_vrm(client) \
-device_create_file(&client->dev, &dev_attr_vrm);
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
static ssize_t
show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", data->alarms);
}
-static
-DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
-#define device_create_file_alarms(client) \
-device_create_file(&client->dev, &dev_attr_alarms);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83781d_data *data = w83781d_update_device(dev);
store_beep_reg(struct device *dev, const char *buf, size_t count,
int update_mask)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
u32 val, val2;
val = simple_strtoul(buf, NULL, 10);
sysfs_beep(ENABLE, enable);
sysfs_beep(MASK, mask);
-#define device_create_file_beep(client) \
-do { \
-device_create_file(&client->dev, &dev_attr_beep_enable); \
-device_create_file(&client->dev, &dev_attr_beep_mask); \
-} while (0)
-
static ssize_t
show_fan_div_reg(struct device *dev, char *buf, int nr)
{
static ssize_t
store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
unsigned long min;
u8 reg;
unsigned long val = simple_strtoul(buf, NULL, 10);
sysfs_fan_div(2);
sysfs_fan_div(3);
-#define device_create_file_fan_div(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
-} while (0)
-
static ssize_t
show_pwm_reg(struct device *dev, char *buf, int nr)
{
static ssize_t
store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
u32 val;
val = simple_strtoul(buf, NULL, 10);
static ssize_t
store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
u32 val, reg;
val = simple_strtoul(buf, NULL, 10);
sysfs_pwm(3);
sysfs_pwm(4);
-#define device_create_file_pwm(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_pwm##offset); \
-} while (0)
-
-#define device_create_file_pwmenable(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
-} while (0)
-
static ssize_t
show_sensor_reg(struct device *dev, char *buf, int nr)
{
static ssize_t
store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
u32 val, tmp;
val = simple_strtoul(buf, NULL, 10);
sysfs_sensor(2);
sysfs_sensor(3);
-#define device_create_file_sensor(client, offset) \
-do { \
-device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
-} while (0)
+/* I2C devices get this name attribute automatically, but for ISA devices
+ we must create it by ourselves. */
+static ssize_t
+show_name(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->client.name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
/* This function is called when:
* w83781d_driver is inserted (when this module is loaded), for each
return i2c_probe(adapter, &addr_data, w83781d_detect);
}
-static int
-w83781d_isa_attach_adapter(struct i2c_adapter *adapter)
-{
- return w83781d_detect(adapter, isa_address, -1);
-}
-
/* Assumes that adapter is of I2C, not ISA variety.
* OTHERWISE DON'T CALL THIS
*/
return err;
}
+#define IN_UNIT_ATTRS(X) \
+ &dev_attr_in##X##_input.attr, \
+ &dev_attr_in##X##_min.attr, \
+ &dev_attr_in##X##_max.attr
+
+#define FAN_UNIT_ATTRS(X) \
+ &dev_attr_fan##X##_input.attr, \
+ &dev_attr_fan##X##_min.attr, \
+ &dev_attr_fan##X##_div.attr
+
+#define TEMP_UNIT_ATTRS(X) \
+ &dev_attr_temp##X##_input.attr, \
+ &dev_attr_temp##X##_max.attr, \
+ &dev_attr_temp##X##_max_hyst.attr
+
+static struct attribute* w83781d_attributes[] = {
+ IN_UNIT_ATTRS(0),
+ IN_UNIT_ATTRS(2),
+ IN_UNIT_ATTRS(3),
+ IN_UNIT_ATTRS(4),
+ IN_UNIT_ATTRS(5),
+ IN_UNIT_ATTRS(6),
+ FAN_UNIT_ATTRS(1),
+ FAN_UNIT_ATTRS(2),
+ FAN_UNIT_ATTRS(3),
+ TEMP_UNIT_ATTRS(1),
+ TEMP_UNIT_ATTRS(2),
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ &dev_attr_alarms.attr,
+ &dev_attr_beep_mask.attr,
+ &dev_attr_beep_enable.attr,
+ NULL
+};
+static const struct attribute_group w83781d_group = {
+ .attrs = w83781d_attributes,
+};
+
+static struct attribute *w83781d_attributes_opt[] = {
+ IN_UNIT_ATTRS(1),
+ IN_UNIT_ATTRS(7),
+ IN_UNIT_ATTRS(8),
+ TEMP_UNIT_ATTRS(3),
+ &dev_attr_pwm1.attr,
+ &dev_attr_pwm2.attr,
+ &dev_attr_pwm2_enable.attr,
+ &dev_attr_pwm3.attr,
+ &dev_attr_pwm4.attr,
+ &dev_attr_temp1_type.attr,
+ &dev_attr_temp2_type.attr,
+ &dev_attr_temp3_type.attr,
+ NULL
+};
+static const struct attribute_group w83781d_group_opt = {
+ .attrs = w83781d_attributes_opt,
+};
+
+/* No clean up is done on error, it's up to the caller */
static int
-w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+w83781d_create_files(struct device *dev, int kind, int is_isa)
{
- int i = 0, val1 = 0, val2;
- struct i2c_client *new_client;
- struct w83781d_data *data;
int err;
- const char *client_name = "";
- int is_isa = i2c_is_isa_adapter(adapter);
- enum vendor { winbond, asus } vendid;
- if (!is_isa
- && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- err = -EINVAL;
- goto ERROR0;
+ if ((err = sysfs_create_group(&dev->kobj, &w83781d_group)))
+ return err;
+
+ if (kind != w83783s) {
+ if ((err = device_create_file(dev, &dev_attr_in1_input))
+ || (err = device_create_file(dev, &dev_attr_in1_min))
+ || (err = device_create_file(dev, &dev_attr_in1_max)))
+ return err;
+ }
+ if (kind != as99127f && kind != w83781d && kind != w83783s) {
+ if ((err = device_create_file(dev, &dev_attr_in7_input))
+ || (err = device_create_file(dev, &dev_attr_in7_min))
+ || (err = device_create_file(dev, &dev_attr_in7_max))
+ || (err = device_create_file(dev, &dev_attr_in8_input))
+ || (err = device_create_file(dev, &dev_attr_in8_min))
+ || (err = device_create_file(dev, &dev_attr_in8_max)))
+ return err;
+ }
+ if (kind != w83783s) {
+ if ((err = device_create_file(dev, &dev_attr_temp3_input))
+ || (err = device_create_file(dev, &dev_attr_temp3_max))
+ || (err = device_create_file(dev,
+ &dev_attr_temp3_max_hyst)))
+ return err;
}
- /* Prevent users from forcing a kind for a bus it isn't supposed
- to possibly be on */
- if (is_isa && (kind == as99127f || kind == w83783s)) {
- dev_err(&adapter->dev,
- "Cannot force I2C-only chip for ISA address 0x%02x.\n",
- address);
- err = -EINVAL;
- goto ERROR0;
+ if (kind != w83781d && kind != as99127f) {
+ if ((err = device_create_file(dev, &dev_attr_pwm1))
+ || (err = device_create_file(dev, &dev_attr_pwm2))
+ || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
+ return err;
}
-
- if (is_isa)
- if (!request_region(address, W83781D_EXTENT,
- w83781d_isa_driver.driver.name)) {
- dev_dbg(&adapter->dev, "Request of region "
- "0x%x-0x%x for w83781d failed\n", address,
- address + W83781D_EXTENT - 1);
- err = -EBUSY;
- goto ERROR0;
+ if (kind == w83782d && !is_isa) {
+ if ((err = device_create_file(dev, &dev_attr_pwm3))
+ || (err = device_create_file(dev, &dev_attr_pwm4)))
+ return err;
+ }
+
+ if (kind != as99127f && kind != w83781d) {
+ if ((err = device_create_file(dev, &dev_attr_temp1_type))
+ || (err = device_create_file(dev,
+ &dev_attr_temp2_type)))
+ return err;
+ if (kind != w83783s) {
+ if ((err = device_create_file(dev,
+ &dev_attr_temp3_type)))
+ return err;
}
+ }
- /* Probe whether there is anything available on this address. Already
- done for SMBus clients */
- if (kind < 0) {
- if (is_isa) {
+ if (is_isa) {
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
+ return err;
+ }
-#define REALLY_SLOW_IO
- /* We need the timeouts for at least some LM78-like
- chips. But only if we read 'undefined' registers. */
- i = inb_p(address + 1);
- if (inb_p(address + 2) != i
- || inb_p(address + 3) != i
- || inb_p(address + 7) != i) {
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 1\n");
- err = -ENODEV;
- goto ERROR1;
- }
-#undef REALLY_SLOW_IO
+ return 0;
+}
- /* Let's just hope nothing breaks here */
- i = inb_p(address + 5) & 0x7f;
- outb_p(~i & 0x7f, address + 5);
- val2 = inb_p(address + 5) & 0x7f;
- if (val2 != (~i & 0x7f)) {
- outb_p(i, address + 5);
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 2 (0x%x != "
- "0x%x at 0x%x)\n", val2, ~i & 0x7f,
- address + 5);
- err = -ENODEV;
- goto ERROR1;
- }
- }
+static int
+w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int val1 = 0, val2;
+ struct i2c_client *client;
+ struct device *dev;
+ struct w83781d_data *data;
+ int err;
+ const char *client_name = "";
+ enum vendor { winbond, asus } vendid;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ err = -EINVAL;
+ goto ERROR1;
}
/* OK. For now, we presume we have a valid client. We now create the
goto ERROR1;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
mutex_init(&data->lock);
- new_client->adapter = adapter;
- new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
- new_client->flags = 0;
+ client->adapter = adapter;
+ client->driver = &w83781d_driver;
+ dev = &client->dev;
/* Now, we do the remaining detection. */
force_*=... parameter, and the Winbond will be reset to the right
bank. */
if (kind < 0) {
- if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) {
- dev_dbg(&new_client->dev, "Detection failed at step "
- "3\n");
+ if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) {
+ dev_dbg(&adapter->dev, "Detection of w83781d chip "
+ "failed at step 3\n");
err = -ENODEV;
goto ERROR2;
}
- val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
- val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+ val1 = w83781d_read_value(client, W83781D_REG_BANK);
+ val2 = w83781d_read_value(client, W83781D_REG_CHIPMAN);
/* Check for Winbond or Asus ID if in bank 0 */
if ((!(val1 & 0x07)) &&
(((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
|| ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
- dev_dbg(&new_client->dev, "Detection failed at step "
- "4\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d chip "
+ "failed at step 4\n");
err = -ENODEV;
goto ERROR2;
}
/* If Winbond SMBus, check address at 0x48.
Asus doesn't support, except for as99127f rev.2 */
- if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
- ((val1 & 0x80) && (val2 == 0x5c)))) {
+ if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
+ ((val1 & 0x80) && (val2 == 0x5c))) {
if (w83781d_read_value
- (new_client, W83781D_REG_I2C_ADDR) != address) {
- dev_dbg(&new_client->dev, "Detection failed "
- "at step 5\n");
+ (client, W83781D_REG_I2C_ADDR) != address) {
+ dev_dbg(&adapter->dev, "Detection of w83781d "
+ "chip failed at step 5\n");
err = -ENODEV;
goto ERROR2;
}
/* We have either had a force parameter, or we have already detected the
Winbond. Put it now into bank 0 and Vendor ID High Byte */
- w83781d_write_value(new_client, W83781D_REG_BANK,
- (w83781d_read_value(new_client,
- W83781D_REG_BANK) & 0x78) |
- 0x80);
+ w83781d_write_value(client, W83781D_REG_BANK,
+ (w83781d_read_value(client, W83781D_REG_BANK)
+ & 0x78) | 0x80);
/* Determine the chip type. */
if (kind <= 0) {
/* get vendor ID */
- val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+ val2 = w83781d_read_value(client, W83781D_REG_CHIPMAN);
if (val2 == 0x5c)
vendid = winbond;
else if (val2 == 0x12)
vendid = asus;
else {
- dev_dbg(&new_client->dev, "Chip was made by neither "
- "Winbond nor Asus?\n");
+ dev_dbg(&adapter->dev, "w83781d chip vendor is "
+ "neither Winbond nor Asus\n");
err = -ENODEV;
goto ERROR2;
}
- val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID);
+ val1 = w83781d_read_value(client, W83781D_REG_WCHIPID);
if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
kind = w83781d;
else if (val1 == 0x30 && vendid == winbond)
kind = w83782d;
- else if (val1 == 0x40 && vendid == winbond && !is_isa
- && address == 0x2d)
+ else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
kind = w83783s;
else if (val1 == 0x21 && vendid == winbond)
kind = w83627hf;
- else if (val1 == 0x31 && !is_isa && address >= 0x28)
+ else if (val1 == 0x31 && address >= 0x28)
kind = as99127f;
else {
if (kind == 0)
- dev_warn(&new_client->dev, "Ignoring 'force' "
+ dev_warn(&adapter->dev, "Ignoring 'force' "
"parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
+ "address 0x%02x\n", address);
err = -EINVAL;
goto ERROR2;
}
}
/* Fill in the remaining client fields and put into the global list */
- strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+ strlcpy(client->name, client_name, I2C_NAME_SIZE);
data->type = kind;
- data->valid = 0;
- mutex_init(&data->update_lock);
-
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto ERROR2;
/* attach secondary i2c lm75-like clients */
- if (!is_isa) {
- if ((err = w83781d_detect_subclients(adapter, address,
- kind, new_client)))
- goto ERROR3;
- } else {
- data->lm75[0] = NULL;
- data->lm75[1] = NULL;
- }
+ if ((err = w83781d_detect_subclients(adapter, address,
+ kind, client)))
+ goto ERROR3;
/* Initialize the chip */
- w83781d_init_client(new_client);
-
- /* A few vars need to be filled upon startup */
- for (i = 1; i <= 3; i++) {
- data->fan_min[i - 1] = w83781d_read_value(new_client,
- W83781D_REG_FAN_MIN(i));
- }
- if (kind != w83781d && kind != as99127f)
- for (i = 0; i < 4; i++)
- data->pwmenable[i] = 1;
+ w83781d_init_device(dev);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
+ err = w83781d_create_files(dev, kind, 0);
+ if (err)
+ goto ERROR4;
+
+ data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR4;
}
- device_create_file_in(new_client, 0);
- if (kind != w83783s)
- device_create_file_in(new_client, 1);
- device_create_file_in(new_client, 2);
- device_create_file_in(new_client, 3);
- device_create_file_in(new_client, 4);
- device_create_file_in(new_client, 5);
- device_create_file_in(new_client, 6);
- if (kind != as99127f && kind != w83781d && kind != w83783s) {
- device_create_file_in(new_client, 7);
- device_create_file_in(new_client, 8);
- }
-
- device_create_file_fan(new_client, 1);
- device_create_file_fan(new_client, 2);
- device_create_file_fan(new_client, 3);
-
- device_create_file_temp(new_client, 1);
- device_create_file_temp(new_client, 2);
- if (kind != w83783s)
- device_create_file_temp(new_client, 3);
-
- device_create_file_vid(new_client);
- device_create_file_vrm(new_client);
-
- device_create_file_fan_div(new_client, 1);
- device_create_file_fan_div(new_client, 2);
- device_create_file_fan_div(new_client, 3);
-
- device_create_file_alarms(new_client);
-
- device_create_file_beep(new_client);
-
- if (kind != w83781d && kind != as99127f) {
- device_create_file_pwm(new_client, 1);
- device_create_file_pwm(new_client, 2);
- device_create_file_pwmenable(new_client, 2);
- }
- if (kind == w83782d && !is_isa) {
- device_create_file_pwm(new_client, 3);
- device_create_file_pwm(new_client, 4);
- }
-
- if (kind != as99127f && kind != w83781d) {
- device_create_file_sensor(new_client, 1);
- device_create_file_sensor(new_client, 2);
- if (kind != w83783s)
- device_create_file_sensor(new_client, 3);
- }
-
return 0;
ERROR4:
+ sysfs_remove_group(&dev->kobj, &w83781d_group);
+ sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
+
if (data->lm75[1]) {
i2c_detach_client(data->lm75[1]);
kfree(data->lm75[1]);
kfree(data->lm75[0]);
}
ERROR3:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
ERROR2:
kfree(data);
ERROR1:
- if (is_isa)
- release_region(address, W83781D_EXTENT);
-ERROR0:
return err;
}
int err;
/* main client */
- if (data)
+ if (data) {
hwmon_device_unregister(data->class_dev);
-
- if (i2c_is_isa_client(client))
- release_region(client->addr, W83781D_EXTENT);
+ sysfs_remove_group(&client->dev.kobj, &w83781d_group);
+ sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt);
+ }
if ((err = i2c_detach_client(client)))
return err;
return 0;
}
+static int __devinit
+w83781d_isa_probe(struct platform_device *pdev)
+{
+ int err, reg;
+ struct w83781d_data *data;
+ struct resource *res;
+ const char *name;
+
+ /* Reserve the ISA region */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, W83781D_EXTENT, "w83781d")) {
+ err = -EBUSY;
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_release_region;
+ }
+ mutex_init(&data->lock);
+ data->client.addr = res->start;
+ i2c_set_clientdata(&data->client, data);
+ platform_set_drvdata(pdev, data);
+
+ reg = w83781d_read_value(&data->client, W83781D_REG_WCHIPID);
+ switch (reg) {
+ case 0x21:
+ data->type = w83627hf;
+ name = "w83627hf";
+ break;
+ case 0x30:
+ data->type = w83782d;
+ name = "w83782d";
+ break;
+ default:
+ data->type = w83781d;
+ name = "w83781d";
+ }
+ strlcpy(data->client.name, name, I2C_NAME_SIZE);
+
+ /* Initialize the W83781D chip */
+ w83781d_init_device(&pdev->dev);
+
+ /* Register sysfs hooks */
+ err = w83781d_create_files(&pdev->dev, data->type, 1);
+ if (err)
+ goto exit_remove_files;
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+ exit_remove_files:
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ kfree(data);
+ exit_release_region:
+ release_region(res->start, W83781D_EXTENT);
+ exit:
+ return err;
+}
+
+static int __devexit
+w83781d_isa_remove(struct platform_device *pdev)
+{
+ struct w83781d_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ release_region(data->client.addr, W83781D_EXTENT);
+ kfree(data);
+
+ return 0;
+}
+
/* The SMBus locks itself, usually, but nothing may access the Winbond between
bank switches. ISA access must always be locked explicitly!
We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
struct i2c_client *cl;
mutex_lock(&data->lock);
- if (i2c_is_isa_client(client)) {
+ if (!client->driver) { /* ISA device */
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x50)
struct i2c_client *cl;
mutex_lock(&data->lock);
- if (i2c_is_isa_client(client)) {
+ if (!client->driver) { /* ISA device */
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x53)
}
static void
-w83781d_init_client(struct i2c_client *client)
+w83781d_init_device(struct device *dev)
{
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
int i, p;
int type = data->type;
u8 tmp;
It might even go away if nobody reports it as being useful,
as I see very little reason why this would be needed at
all. */
- dev_info(&client->dev, "If reset=1 solved a problem you were "
+ dev_info(dev, "If reset=1 solved a problem you were "
"having, please report!\n");
/* save these registers */
/* Enable temp2 */
tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
if (tmp & 0x01) {
- dev_warn(&client->dev, "Enabling temp2, readings "
+ dev_warn(dev, "Enabling temp2, readings "
"might not make sense\n");
w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
tmp & 0xfe);
tmp = w83781d_read_value(client,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
- dev_warn(&client->dev, "Enabling temp3, "
+ dev_warn(dev, "Enabling temp3, "
"readings might not make sense\n");
w83781d_write_value(client,
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
(w83781d_read_value(client,
W83781D_REG_CONFIG) & 0xf7)
| 0x01);
+
+ /* A few vars need to be filled upon startup */
+ for (i = 1; i <= 3; i++) {
+ data->fan_min[i - 1] = w83781d_read_value(client,
+ W83781D_REG_FAN_MIN(i));
+ }
+ if (type != w83781d && type != as99127f)
+ for (i = 0; i < 4; i++)
+ data->pwmenable[i] = 1;
+
+ mutex_init(&data->update_lock);
}
static struct w83781d_data *w83781d_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
int i;
mutex_lock(&data->update_lock);
data->pwm[i - 1] =
w83781d_read_value(client,
W83781D_REG_PWM(i));
- if ((data->type != w83782d
- || i2c_is_isa_client(client))
+ if ((data->type != w83782d || !client->driver)
&& i == 2)
break;
}
return data;
}
+/* return 1 if a supported chip is found, 0 otherwise */
+static int __init
+w83781d_isa_found(unsigned short address)
+{
+ int val, save, found = 0;
+
+ if (!request_region(address, W83781D_EXTENT, "w83781d"))
+ return 0;
+
+#define REALLY_SLOW_IO
+ /* We need the timeouts for at least some W83781D-like
+ chips. But only if we read 'undefined' registers. */
+ val = inb_p(address + 1);
+ if (inb_p(address + 2) != val
+ || inb_p(address + 3) != val
+ || inb_p(address + 7) != val) {
+ pr_debug("w83781d: Detection failed at step 1\n");
+ goto release;
+ }
+#undef REALLY_SLOW_IO
+
+ /* We should be able to change the 7 LSB of the address port. The
+ MSB (busy flag) should be clear initially, set after the write. */
+ save = inb_p(address + W83781D_ADDR_REG_OFFSET);
+ if (save & 0x80) {
+ pr_debug("w83781d: Detection failed at step 2\n");
+ goto release;
+ }
+ val = ~save & 0x7f;
+ outb_p(val, address + W83781D_ADDR_REG_OFFSET);
+ if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
+ outb_p(save, address + W83781D_ADDR_REG_OFFSET);
+ pr_debug("w83781d: Detection failed at step 3\n");
+ goto release;
+ }
+
+ /* We found a device, now see if it could be a W83781D */
+ outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if (val & 0x80) {
+ pr_debug("w83781d: Detection failed at step 4\n");
+ goto release;
+ }
+ outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
+ save = inb_p(address + W83781D_DATA_REG_OFFSET);
+ outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if ((!(save & 0x80) && (val != 0xa3))
+ || ((save & 0x80) && (val != 0x5c))) {
+ pr_debug("w83781d: Detection failed at step 5\n");
+ goto release;
+ }
+ outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
+ pr_debug("w83781d: Detection failed at step 6\n");
+ goto release;
+ }
+
+ /* The busy flag should be clear again */
+ if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
+ pr_debug("w83781d: Detection failed at step 7\n");
+ goto release;
+ }
+
+ /* Determine the chip type */
+ outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
+ save = inb_p(address + W83781D_DATA_REG_OFFSET);
+ outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
+ outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if ((val & 0xfe) == 0x10 /* W83781D */
+ || val == 0x30 /* W83782D */
+ || val == 0x21) /* W83627HF */
+ found = 1;
+
+ if (found)
+ pr_info("w83781d: Found a %s chip at %#x\n",
+ val == 0x21 ? "W83627HF" :
+ val == 0x30 ? "W83782D" : "W83781D", (int)address);
+
+ release:
+ release_region(address, W83781D_EXTENT);
+ return found;
+}
+
+static int __init
+w83781d_isa_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + W83781D_EXTENT,
+ .name = "w83781d",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("w83781d", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "w83781d: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "w83781d: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+ exit_device_put:
+ platform_device_put(pdev);
+ exit:
+ pdev = NULL;
+ return err;
+}
+
static int __init
sensors_w83781d_init(void)
{
res = i2c_add_driver(&w83781d_driver);
if (res)
- return res;
+ goto exit;
+
+ if (w83781d_isa_found(isa_address)) {
+ res = platform_driver_register(&w83781d_isa_driver);
+ if (res)
+ goto exit_unreg_i2c_driver;
- res = i2c_isa_add_driver(&w83781d_isa_driver);
- if (res) {
- i2c_del_driver(&w83781d_driver);
- return res;
+ /* Sets global pdev as a side effect */
+ res = w83781d_isa_device_add(isa_address);
+ if (res)
+ goto exit_unreg_isa_driver;
}
return 0;
+
+ exit_unreg_isa_driver:
+ platform_driver_unregister(&w83781d_isa_driver);
+ exit_unreg_i2c_driver:
+ i2c_del_driver(&w83781d_driver);
+ exit:
+ return res;
}
static void __exit
sensors_w83781d_exit(void)
{
- i2c_isa_del_driver(&w83781d_isa_driver);
+ if (pdev) {
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&w83781d_isa_driver);
+ }
i2c_del_driver(&w83781d_driver);
}
projects / ~andy / linux / blobdiff