* Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
* Datasheet: http://www.ti.com/product/ina219
*
+ * INA220:
+ * Bi-Directional Current/Power Monitor with I2C Interface
+ * Datasheet: http://www.ti.com/product/ina220
+ *
* INA226:
* Bi-Directional Current/Power Monitor with I2C Interface
* Datasheet: http://www.ti.com/product/ina226
*
+ * INA230:
+ * Bi-directional Current/Power Monitor with I2C Interface
+ * Datasheet: http://www.ti.com/product/ina230
+ *
* Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
* Thanks to Jan Volkering
*
enum ina2xx_ids { ina219, ina226 };
+struct ina2xx_config {
+ u16 config_default;
+ int calibration_factor;
+ int registers;
+ int shunt_div;
+ int bus_voltage_shift;
+ int bus_voltage_lsb; /* uV */
+ int power_lsb; /* uW */
+};
+
struct ina2xx_data {
struct device *hwmon_dev;
+ const struct ina2xx_config *config;
struct mutex update_lock;
bool valid;
unsigned long last_updated;
int kind;
- int registers;
u16 regs[INA2XX_MAX_REGISTERS];
};
+static const struct ina2xx_config ina2xx_config[] = {
+ [ina219] = {
+ .config_default = INA219_CONFIG_DEFAULT,
+ .calibration_factor = 40960000,
+ .registers = INA219_REGISTERS,
+ .shunt_div = 100,
+ .bus_voltage_shift = 3,
+ .bus_voltage_lsb = 4000,
+ .power_lsb = 20000,
+ },
+ [ina226] = {
+ .config_default = INA226_CONFIG_DEFAULT,
+ .calibration_factor = 5120000,
+ .registers = INA226_REGISTERS,
+ .shunt_div = 400,
+ .bus_voltage_shift = 0,
+ .bus_voltage_lsb = 1250,
+ .power_lsb = 25000,
+ },
+};
+
static struct ina2xx_data *ina2xx_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
dev_dbg(&client->dev, "Starting ina2xx update\n");
/* Read all registers */
- for (i = 0; i < data->registers; i++) {
+ for (i = 0; i < data->config->registers; i++) {
int rv = i2c_smbus_read_word_swapped(client, i);
if (rv < 0) {
ret = ERR_PTR(rv);
return ret;
}
-static int ina219_get_value(struct ina2xx_data *data, u8 reg)
+static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
{
- /*
- * calculate exact value for the given register
- * we assume default power-on reset settings:
- * bus voltage range 32V
- * gain = /8
- * adc 1 & 2 -> conversion time 532uS
- * mode is continuous shunt and bus
- * calibration value is INA219_CALIBRATION_VALUE
- */
- int val = data->regs[reg];
+ int val;
switch (reg) {
case INA2XX_SHUNT_VOLTAGE:
- /* LSB=10uV. Convert to mV. */
- val = DIV_ROUND_CLOSEST(val, 100);
+ val = DIV_ROUND_CLOSEST(data->regs[reg],
+ data->config->shunt_div);
break;
case INA2XX_BUS_VOLTAGE:
- /* LSB=4mV. Register is not right aligned, convert to mV. */
- val = (val >> 3) * 4;
+ val = (data->regs[reg] >> data->config->bus_voltage_shift)
+ * data->config->bus_voltage_lsb;
+ val = DIV_ROUND_CLOSEST(val, 1000);
break;
case INA2XX_POWER:
- /* LSB=20mW. Convert to uW */
- val = val * 20 * 1000;
- break;
- case INA2XX_CURRENT:
- /* LSB=1mA (selected). Is in mA */
- break;
- default:
- /* programmer goofed */
- WARN_ON_ONCE(1);
- val = 0;
- break;
- }
-
- return val;
-}
-
-static int ina226_get_value(struct ina2xx_data *data, u8 reg)
-{
- /*
- * calculate exact value for the given register
- * we assume default power-on reset settings:
- * bus voltage range 32V
- * gain = /8
- * adc 1 & 2 -> conversion time 532uS
- * mode is continuous shunt and bus
- * calibration value is INA226_CALIBRATION_VALUE
- */
- int val = data->regs[reg];
-
- switch (reg) {
- case INA2XX_SHUNT_VOLTAGE:
- /* LSB=2.5uV. Convert to mV. */
- val = DIV_ROUND_CLOSEST(val, 400);
- break;
- case INA2XX_BUS_VOLTAGE:
- /* LSB=1.25mV. Convert to mV. */
- val = val + DIV_ROUND_CLOSEST(val, 4);
- break;
- case INA2XX_POWER:
- /* LSB=25mW. Convert to uW */
- val = val * 25 * 1000;
+ val = data->regs[reg] * data->config->power_lsb;
break;
case INA2XX_CURRENT:
/* LSB=1mA (selected). Is in mA */
+ val = data->regs[reg];
break;
default:
/* programmer goofed */
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct ina2xx_data *data = ina2xx_update_device(dev);
- int value = 0;
if (IS_ERR(data))
return PTR_ERR(data);
- switch (data->kind) {
- case ina219:
- value = ina219_get_value(data, attr->index);
- break;
- case ina226:
- value = ina226_get_value(data, attr->index);
- break;
- default:
- WARN_ON_ONCE(1);
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%d\n", value);
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ ina2xx_get_value(data, attr->index));
}
/* shunt voltage */
struct i2c_adapter *adapter = client->adapter;
struct ina2xx_data *data;
struct ina2xx_platform_data *pdata;
- int ret = 0;
+ int ret;
long shunt = 10000; /* default shunt value 10mOhms */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
/* set the device type */
data->kind = id->driver_data;
+ data->config = &ina2xx_config[data->kind];
- switch (data->kind) {
- case ina219:
- /* device configuration */
- i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
- INA219_CONFIG_DEFAULT);
-
- /* set current LSB to 1mA, shunt is in uOhms */
- /* (equation 13 in datasheet) */
- i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
- 40960000 / shunt);
- dev_info(&client->dev,
- "power monitor INA219 (Rshunt = %li uOhm)\n", shunt);
- data->registers = INA219_REGISTERS;
- break;
- case ina226:
- /* device configuration */
- i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
- INA226_CONFIG_DEFAULT);
-
- /* set current LSB to 1mA, shunt is in uOhms */
- /* (equation 1 in datasheet)*/
- i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
- 5120000 / shunt);
- dev_info(&client->dev,
- "power monitor INA226 (Rshunt = %li uOhm)\n", shunt);
- data->registers = INA226_REGISTERS;
- break;
- default:
- /* unknown device id */
- return -ENODEV;
- }
+ /* device configuration */
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ data->config->config_default);
+ /* set current LSB to 1mA, shunt is in uOhms */
+ /* (equation 13 in datasheet) */
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ data->config->calibration_factor / shunt);
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
goto out_err_hwmon;
}
+ dev_info(&client->dev, "power monitor %s (Rshunt = %li uOhm)\n",
+ id->name, shunt);
+
return 0;
out_err_hwmon:
static const struct i2c_device_id ina2xx_id[] = {
{ "ina219", ina219 },
+ { "ina220", ina219 },
{ "ina226", ina226 },
+ { "ina230", ina226 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
projects / ~andy / linux / blobdiff