static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
struct intel_crtc_config *pipe_config);
+static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *old_fb);
+
+
typedef struct {
int min, max;
} intel_range_t;
int p2_slow, p2_fast;
} intel_p2_t;
-#define INTEL_P2_NUM 2
typedef struct intel_limit intel_limit_t;
struct intel_limit {
intel_range_t dot, vco, n, m, m1, m2, p, p1;
{
u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
u32 m, n, fastclk;
- u32 updrate, minupdate, fracbits, p;
+ u32 updrate, minupdate, p;
unsigned long bestppm, ppm, absppm;
int dotclk, flag;
fastclk = dotclk / (2*100);
updrate = 0;
minupdate = 19200;
- fracbits = 1;
n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
bestm1 = bestm2 = bestp1 = bestp2 = 0;
return 0;
err_unpin:
- i915_gem_object_unpin(obj);
+ i915_gem_object_unpin_from_display_plane(obj);
err_interruptible:
dev_priv->mm.interruptible = true;
return ret;
void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
{
i915_gem_object_unpin_fence(obj);
- i915_gem_object_unpin(obj);
+ i915_gem_object_unpin_from_display_plane(obj);
}
/* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp, i;
+ u32 reg, temp, i, j;
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
for train result */
DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
I915_READ(FDI_RX_IIR(pipe)));
- /* enable CPU FDI TX and PCH FDI RX */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_DP_PORT_WIDTH_MASK;
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
- temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
- temp |= FDI_COMPOSITE_SYNC;
- I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
- I915_WRITE(FDI_RX_MISC(pipe),
- FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_AUTO;
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
- temp |= FDI_COMPOSITE_SYNC;
- I915_WRITE(reg, temp | FDI_RX_ENABLE);
+ /* Try each vswing and preemphasis setting twice before moving on */
+ for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
+ /* disable first in case we need to retry */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
+ temp &= ~FDI_TX_ENABLE;
+ I915_WRITE(reg, temp);
- POSTING_READ(reg);
- udelay(150);
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_AUTO;
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp &= ~FDI_RX_ENABLE;
+ I915_WRITE(reg, temp);
- for (i = 0; i < 4; i++) {
+ /* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[i];
- I915_WRITE(reg, temp);
+ temp |= snb_b_fdi_train_param[j/2];
+ temp |= FDI_COMPOSITE_SYNC;
+ I915_WRITE(reg, temp | FDI_TX_ENABLE);
- POSTING_READ(reg);
- udelay(500);
+ I915_WRITE(FDI_RX_MISC(pipe),
+ FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
- reg = FDI_RX_IIR(pipe);
+ reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_BIT_LOCK ||
- (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i);
- break;
- }
- }
- if (i == 4)
- DRM_ERROR("FDI train 1 fail!\n");
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
+ I915_WRITE(reg, temp | FDI_RX_ENABLE);
- /* Train 2 */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE_IVB;
- temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
- I915_WRITE(reg, temp);
+ POSTING_READ(reg);
+ udelay(1); /* should be 0.5us */
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
- I915_WRITE(reg, temp);
+ for (i = 0; i < 4; i++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
- POSTING_READ(reg);
- udelay(150);
+ if (temp & FDI_RX_BIT_LOCK ||
+ (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
+ i);
+ break;
+ }
+ udelay(1); /* should be 0.5us */
+ }
+ if (i == 4) {
+ DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
+ continue;
+ }
- for (i = 0; i < 4; i++) {
+ /* Train 2 */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[i];
+ temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
I915_WRITE(reg, temp);
POSTING_READ(reg);
- udelay(500);
+ udelay(2); /* should be 1.5us */
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ for (i = 0; i < 4; i++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i);
- break;
+ if (temp & FDI_RX_SYMBOL_LOCK ||
+ (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
+ i);
+ goto train_done;
+ }
+ udelay(2); /* should be 1.5us */
}
+ if (i == 4)
+ DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
}
- if (i == 4)
- DRM_ERROR("FDI train 2 fail!\n");
+train_done:
DRM_DEBUG_KMS("FDI train done.\n");
}
intel_crtc->active = true;
intel_update_watermarks(dev);
- mutex_lock(&dev_priv->dpio_lock);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_pll_enable)
encoder->pre_pll_enable(encoder);
if (encoder->pre_enable)
encoder->pre_enable(encoder);
- /* VLV wants encoder enabling _before_ the pipe is up. */
- for_each_encoder_on_crtc(dev, crtc, encoder)
- encoder->enable(encoder);
-
i9xx_pfit_enable(intel_crtc);
intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
- mutex_unlock(&dev_priv->dpio_lock);
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ encoder->enable(encoder);
}
static void i9xx_crtc_enable(struct drm_crtc *crtc)
}
}
-void intel_modeset_disable(struct drm_device *dev)
-{
- struct drm_crtc *crtc;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (crtc->enabled)
- intel_crtc_disable(crtc);
- }
-}
-
void intel_encoder_destroy(struct drm_encoder *encoder)
{
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
kfree(intel_encoder);
}
-/* Simple dpms helper for encodres with just one connector, no cloning and only
+/* Simple dpms helper for encoders with just one connector, no cloning and only
* one kind of off state. It clamps all !ON modes to fully OFF and changes the
* state of the entire output pipe. */
-void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
+static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
{
if (mode == DRM_MODE_DPMS_ON) {
encoder->connectors_active = true;
{
pipe_config->ips_enabled = i915_enable_ips &&
hsw_crtc_supports_ips(crtc) &&
- pipe_config->pipe_bpp == 24;
+ pipe_config->pipe_bpp <= 24;
}
static int intel_crtc_compute_config(struct intel_crtc *crtc,
return -EINVAL;
}
- /* All interlaced capable intel hw wants timings in frames. Note though
- * that intel_lvds_compute_config does some funny tricks with the crtc
- * timings, so we need to be careful not to clobber these.*/
- if (!pipe_config->timings_set)
- drm_mode_set_crtcinfo(adjusted_mode, 0);
-
/* Cantiga+ cannot handle modes with a hsync front porch of 0.
* WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
*/
int pipe = crtc->pipe;
u32 dpll, mdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
- bool is_hdmi;
u32 coreclk, reg_val, dpll_md;
mutex_lock(&dev_priv->dpio_lock);
- is_hdmi = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
-
bestn = crtc->config.dpll.n;
bestm1 = crtc->config.dpll.m1;
bestm2 = crtc->config.dpll.m2;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
struct intel_crtc *crtc;
unsigned long irqflags;
- uint32_t val, pch_hpd_mask;
-
- pch_hpd_mask = SDE_PORTB_HOTPLUG_CPT | SDE_PORTC_HOTPLUG_CPT;
- if (!(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE))
- pch_hpd_mask |= SDE_PORTD_HOTPLUG_CPT | SDE_CRT_HOTPLUG_CPT;
+ uint32_t val;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
WARN(crtc->base.enabled, "CRTC for pipe %c enabled\n",
WARN((val & ~DE_PCH_EVENT_IVB) != val,
"Unexpected DEIMR bits enabled: 0x%x\n", val);
val = I915_READ(SDEIMR);
- WARN((val & ~pch_hpd_mask) != val,
+ WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff,
"Unexpected SDEIMR bits enabled: 0x%x\n", val);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
return;
+ /* Make sure we're not on PC8 state before disabling PC8, otherwise
+ * we'll hang the machine! */
+ dev_priv->uncore.funcs.force_wake_get(dev_priv);
+
if (val & LCPLL_POWER_DOWN_ALLOW) {
val &= ~LCPLL_POWER_DOWN_ALLOW;
I915_WRITE(LCPLL_CTL, val);
+ POSTING_READ(LCPLL_CTL);
}
val = I915_READ(D_COMP);
val |= D_COMP_COMP_FORCE;
val &= ~D_COMP_COMP_DISABLE;
I915_WRITE(D_COMP, val);
- I915_READ(D_COMP);
+ POSTING_READ(D_COMP);
val = I915_READ(LCPLL_CTL);
val &= ~LCPLL_PLL_DISABLE;
LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
DRM_ERROR("Switching back to LCPLL failed\n");
}
+
+ dev_priv->uncore.funcs.force_wake_put(dev_priv);
+}
+
+void hsw_enable_pc8_work(struct work_struct *__work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(to_delayed_work(__work), struct drm_i915_private,
+ pc8.enable_work);
+ struct drm_device *dev = dev_priv->dev;
+ uint32_t val;
+
+ if (dev_priv->pc8.enabled)
+ return;
+
+ DRM_DEBUG_KMS("Enabling package C8+\n");
+
+ dev_priv->pc8.enabled = true;
+
+ if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
+
+ lpt_disable_clkout_dp(dev);
+ hsw_pc8_disable_interrupts(dev);
+ hsw_disable_lcpll(dev_priv, true, true);
+}
+
+static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
+{
+ WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
+ WARN(dev_priv->pc8.disable_count < 1,
+ "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
+
+ dev_priv->pc8.disable_count--;
+ if (dev_priv->pc8.disable_count != 0)
+ return;
+
+ schedule_delayed_work(&dev_priv->pc8.enable_work,
+ msecs_to_jiffies(i915_pc8_timeout));
+}
+
+static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ uint32_t val;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
+ WARN(dev_priv->pc8.disable_count < 0,
+ "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
+
+ dev_priv->pc8.disable_count++;
+ if (dev_priv->pc8.disable_count != 1)
+ return;
+
+ cancel_delayed_work_sync(&dev_priv->pc8.enable_work);
+ if (!dev_priv->pc8.enabled)
+ return;
+
+ DRM_DEBUG_KMS("Disabling package C8+\n");
+
+ hsw_restore_lcpll(dev_priv);
+ hsw_pc8_restore_interrupts(dev);
+ lpt_init_pch_refclk(dev);
+
+ if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val |= PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
+
+ intel_prepare_ddi(dev);
+ i915_gem_init_swizzling(dev);
+ mutex_lock(&dev_priv->rps.hw_lock);
+ gen6_update_ring_freq(dev);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ dev_priv->pc8.enabled = false;
+}
+
+void hsw_enable_package_c8(struct drm_i915_private *dev_priv)
+{
+ mutex_lock(&dev_priv->pc8.lock);
+ __hsw_enable_package_c8(dev_priv);
+ mutex_unlock(&dev_priv->pc8.lock);
+}
+
+void hsw_disable_package_c8(struct drm_i915_private *dev_priv)
+{
+ mutex_lock(&dev_priv->pc8.lock);
+ __hsw_disable_package_c8(dev_priv);
+ mutex_unlock(&dev_priv->pc8.lock);
+}
+
+static bool hsw_can_enable_package_c8(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *crtc;
+ uint32_t val;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
+ if (crtc->base.enabled)
+ return false;
+
+ /* This case is still possible since we have the i915.disable_power_well
+ * parameter and also the KVMr or something else might be requesting the
+ * power well. */
+ val = I915_READ(HSW_PWR_WELL_DRIVER);
+ if (val != 0) {
+ DRM_DEBUG_KMS("Not enabling PC8: power well on\n");
+ return false;
+ }
+
+ return true;
+}
+
+/* Since we're called from modeset_global_resources there's no way to
+ * symmetrically increase and decrease the refcount, so we use
+ * dev_priv->pc8.requirements_met to track whether we already have the refcount
+ * or not.
+ */
+static void hsw_update_package_c8(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ bool allow;
+
+ if (!i915_enable_pc8)
+ return;
+
+ mutex_lock(&dev_priv->pc8.lock);
+
+ allow = hsw_can_enable_package_c8(dev_priv);
+
+ if (allow == dev_priv->pc8.requirements_met)
+ goto done;
+
+ dev_priv->pc8.requirements_met = allow;
+
+ if (allow)
+ __hsw_enable_package_c8(dev_priv);
+ else
+ __hsw_disable_package_c8(dev_priv);
+
+done:
+ mutex_unlock(&dev_priv->pc8.lock);
+}
+
+static void hsw_package_c8_gpu_idle(struct drm_i915_private *dev_priv)
+{
+ if (!dev_priv->pc8.gpu_idle) {
+ dev_priv->pc8.gpu_idle = true;
+ hsw_enable_package_c8(dev_priv);
+ }
+}
+
+static void hsw_package_c8_gpu_busy(struct drm_i915_private *dev_priv)
+{
+ if (dev_priv->pc8.gpu_idle) {
+ dev_priv->pc8.gpu_idle = false;
+ hsw_disable_package_c8(dev_priv);
+ }
}
static void haswell_modeset_global_resources(struct drm_device *dev)
}
intel_set_power_well(dev, enable);
+
+ hsw_update_package_c8(dev);
}
static int haswell_crtc_mode_set(struct drm_crtc *crtc,
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct drm_display_mode *adjusted_mode =
- &intel_crtc->config.adjusted_mode;
struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int ret;
encoder->base.base.id,
drm_get_encoder_name(&encoder->base),
mode->base.id, mode->name);
- if (encoder->mode_set) {
- encoder->mode_set(encoder);
- } else {
- encoder_funcs = encoder->base.helper_private;
- encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
- }
+ encoder->mode_set(encoder);
}
return 0;
if (intel_crtc->cursor_bo != obj)
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
- i915_gem_object_unpin(intel_crtc->cursor_bo);
+ i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
}
return 0;
fail_unpin:
- i915_gem_object_unpin(obj);
+ i915_gem_object_unpin_from_display_plane(obj);
fail_locked:
mutex_unlock(&dev->struct_mutex);
fail:
void intel_mark_busy(struct drm_device *dev)
{
- i915_update_gfx_val(dev->dev_private);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ hsw_package_c8_gpu_busy(dev_priv);
+ i915_update_gfx_val(dev_priv);
}
void intel_mark_idle(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
+ hsw_package_c8_gpu_idle(dev_priv);
+
if (!i915_powersave)
return;
(enum transcoder) to_intel_crtc(crtc)->pipe;
pipe_config->shared_dpll = DPLL_ID_PRIVATE;
+ /*
+ * Sanitize sync polarity flags based on requested ones. If neither
+ * positive or negative polarity is requested, treat this as meaning
+ * negative polarity.
+ */
+ if (!(pipe_config->adjusted_mode.flags &
+ (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
+ pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (!(pipe_config->adjusted_mode.flags &
+ (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
+ pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
+
/* Compute a starting value for pipe_config->pipe_bpp taking the source
* plane pixel format and any sink constraints into account. Returns the
* source plane bpp so that dithering can be selected on mismatches
pipe_config->port_clock = 0;
pipe_config->pixel_multiplier = 1;
+ /* Fill in default crtc timings, allow encoders to overwrite them. */
+ drm_mode_set_crtcinfo(&pipe_config->adjusted_mode, 0);
+
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
return ret;
}
-int intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb)
+static int intel_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb)
{
int ret;
drm_mode_debug_printmodeline(set->mode);
config->mode_changed = true;
}
+
+ DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
+ set->crtc->base.id, config->mode_changed, config->fb_changed);
}
static int
struct drm_crtc *new_crtc;
struct intel_connector *connector;
struct intel_encoder *encoder;
- int count, ro;
+ int ro;
/* The upper layers ensure that we either disable a crtc or have a list
* of connectors. For paranoia, double-check this. */
WARN_ON(!set->fb && (set->num_connectors != 0));
WARN_ON(set->fb && (set->num_connectors == 0));
- count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
/* Otherwise traverse passed in connector list and get encoders
/* connector->new_encoder is now updated for all connectors. */
/* Update crtc of enabled connectors. */
- count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
if (!connector->new_encoder)
intel_dp_init(dev, PCH_DP_D, PORT_D);
} else if (IS_VALLEYVIEW(dev)) {
/* Check for built-in panel first. Shares lanes with HDMI on SDVOC */
- if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
+ if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) {
+ intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
+ PORT_C);
+ if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
+ intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C,
+ PORT_C);
+ }
if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
drm_helper_move_panel_connectors_to_head(dev);
}
+void intel_framebuffer_fini(struct intel_framebuffer *fb)
+{
+ drm_framebuffer_cleanup(&fb->base);
+ drm_gem_object_unreference_unlocked(&fb->obj->base);
+}
+
static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
{
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- drm_framebuffer_cleanup(fb);
- drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
-
+ intel_framebuffer_fini(intel_fb);
kfree(intel_fb);
}
struct drm_i915_private *dev_priv = dev->dev_private;
u32 vga_reg = i915_vgacntrl_reg(dev);
+ /* This function can be called both from intel_modeset_setup_hw_state or
+ * at a very early point in our resume sequence, where the power well
+ * structures are not yet restored. Since this function is at a very
+ * paranoid "someone might have enabled VGA while we were not looking"
+ * level, just check if the power well is enabled instead of trying to
+ * follow the "don't touch the power well if we don't need it" policy
+ * the rest of the driver uses. */
+ if (HAS_POWER_WELL(dev) &&
+ (I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_STATE_ENABLED) == 0)
+ return;
+
if (I915_READ(vga_reg) != VGA_DISP_DISABLE) {
DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
i915_disable_vga(dev);
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
- struct intel_crtc *intel_crtc;
/*
* Interrupts and polling as the first thing to avoid creating havoc.
if (!crtc->fb)
continue;
- intel_crtc = to_intel_crtc(crtc);
intel_increase_pllclock(crtc);
}
projects / ~andy / linux / blobdiff