/* Wait for the Pipe State to go off */
if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
100))
- DRM_DEBUG_KMS("pipe_off wait timed out\n");
+ WARN(1, "pipe_off wait timed out\n");
} else {
u32 last_line, line_mask;
int reg = PIPEDSL(pipe);
} while (((I915_READ(reg) & line_mask) != last_line) &&
time_after(timeout, jiffies));
if (time_after(jiffies, timeout))
- DRM_DEBUG_KMS("pipe_off wait timed out\n");
+ WARN(1, "pipe_off wait timed out\n");
}
}
static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_framebuffer *old_fb;
int ret;
/* no fb bound */
- if (!crtc->fb) {
+ if (!fb) {
DRM_ERROR("No FB bound\n");
return 0;
}
mutex_lock(&dev->struct_mutex);
ret = intel_pin_and_fence_fb_obj(dev,
- to_intel_framebuffer(crtc->fb)->obj,
+ to_intel_framebuffer(fb)->obj,
NULL);
if (ret != 0) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
- if (old_fb)
- intel_finish_fb(old_fb);
+ if (crtc->fb)
+ intel_finish_fb(crtc->fb);
- ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y);
+ ret = dev_priv->display.update_plane(crtc, fb, x, y);
if (ret) {
- intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
+ intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
mutex_unlock(&dev->struct_mutex);
DRM_ERROR("failed to update base address\n");
return ret;
}
+ old_fb = crtc->fb;
+ crtc->fb = fb;
+
if (old_fb) {
intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
{
}
-/**
- * Sets the power management mode of the pipe and plane.
- */
-void intel_crtc_update_dpms(struct drm_crtc *crtc)
+static void intel_crtc_update_sarea(struct drm_crtc *crtc,
+ bool enabled)
{
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_encoder *intel_encoder;
int pipe = intel_crtc->pipe;
- bool enabled, enable = false;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- enable |= intel_encoder->connectors_active;
-
- if (enable)
- dev_priv->display.crtc_enable(crtc);
- else
- dev_priv->display.crtc_disable(crtc);
if (!dev->primary->master)
return;
if (!master_priv->sarea_priv)
return;
- enabled = crtc->enabled && enable;
-
switch (pipe) {
case 0:
master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
}
}
+/**
+ * Sets the power management mode of the pipe and plane.
+ */
+void intel_crtc_update_dpms(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder;
+ bool enable = false;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder)
+ enable |= intel_encoder->connectors_active;
+
+ if (enable)
+ dev_priv->display.crtc_enable(crtc);
+ else
+ dev_priv->display.crtc_disable(crtc);
+
+ intel_crtc_update_sarea(crtc, enable);
+}
+
+static void intel_crtc_noop(struct drm_crtc *crtc)
+{
+}
+
static void intel_crtc_disable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
+ struct drm_connector *connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- /* crtc->disable is only called when we have no encoders, hence this
- * will disable the pipe. */
- intel_crtc_update_dpms(crtc);
+ /* crtc should still be enabled when we disable it. */
+ WARN_ON(!crtc->enabled);
+
+ dev_priv->display.crtc_disable(crtc);
+ intel_crtc_update_sarea(crtc, false);
dev_priv->display.off(crtc);
assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
mutex_lock(&dev->struct_mutex);
intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
mutex_unlock(&dev->struct_mutex);
+ crtc->fb = NULL;
+ }
+
+ /* Update computed state. */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (!connector->encoder || !connector->encoder->crtc)
+ continue;
+
+ if (connector->encoder->crtc != crtc)
+ continue;
+
+ connector->dpms = DRM_MODE_DPMS_OFF;
+ to_intel_encoder(connector->encoder)->connectors_active = false;
}
}
-void intel_encoder_disable(struct drm_encoder *encoder)
+void intel_encoder_noop(struct drm_encoder *encoder)
{
- struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-
- intel_encoder->disable(intel_encoder);
}
void intel_encoder_destroy(struct drm_encoder *encoder)
* true if they don't match).
*/
static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
unsigned int *pipe_bpp,
struct drm_display_mode *mode)
{
* also stays within the max display bpc discovered above.
*/
- switch (crtc->fb->depth) {
+ switch (fb->depth) {
case 8:
bpc = 8; /* since we go through a colormap */
break;
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
- ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ ret = intel_pipe_set_base(crtc, x, y, fb);
intel_update_watermarks(dev);
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
/* determine panel color depth */
temp = I915_READ(PIPECONF(pipe));
temp &= ~PIPE_BPC_MASK;
- dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
+ dither = intel_choose_pipe_bpp_dither(crtc, fb, &pipe_bpp, mode);
switch (pipe_bpp) {
case 18:
temp |= PIPE_6BPC;
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
- ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ ret = intel_pipe_set_base(crtc, x, y, fb);
intel_update_watermarks(dev);
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
drm_vblank_pre_modeset(dev, pipe);
ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
- x, y, old_fb);
+ x, y, fb);
drm_vblank_post_modeset(dev, pipe);
return ret;
uint32_t addr;
int ret;
- DRM_DEBUG_KMS("\n");
-
/* if we want to turn off the cursor ignore width and height */
if (!handle) {
DRM_DEBUG_KMS("cursor off\n");
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_crtc *crtc = NULL;
struct drm_device *dev = encoder->dev;
- struct drm_framebuffer *old_fb;
+ struct drm_framebuffer *fb;
int i = -1;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
if (!mode)
mode = &load_detect_mode;
- old_fb = crtc->fb;
-
/* We need a framebuffer large enough to accommodate all accesses
* that the plane may generate whilst we perform load detection.
* We can not rely on the fbcon either being present (we get called
* not even exist) or that it is large enough to satisfy the
* requested mode.
*/
- crtc->fb = mode_fits_in_fbdev(dev, mode);
- if (crtc->fb == NULL) {
+ fb = mode_fits_in_fbdev(dev, mode);
+ if (fb == NULL) {
DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
- crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
- old->release_fb = crtc->fb;
+ fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
+ old->release_fb = fb;
} else
DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
- if (IS_ERR(crtc->fb)) {
+ if (IS_ERR(fb)) {
DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
goto fail;
}
- if (!intel_set_mode(crtc, mode, 0, 0, old_fb)) {
+ if (!intel_set_mode(crtc, mode, 0, 0, fb)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
fail:
connector->encoder = NULL;
encoder->crtc = NULL;
- crtc->fb = old_fb;
return false;
}
static struct drm_crtc_helper_funcs intel_helper_funcs = {
.mode_set_base_atomic = intel_pipe_set_base_atomic,
.load_lut = intel_crtc_load_lut,
- .disable = intel_crtc_disable,
+ .disable = intel_crtc_noop,
};
+bool intel_encoder_check_is_cloned(struct intel_encoder *encoder)
+{
+ struct intel_encoder *other_encoder;
+ struct drm_crtc *crtc = &encoder->new_crtc->base;
+
+ if (WARN_ON(!crtc))
+ return false;
+
+ list_for_each_entry(other_encoder,
+ &crtc->dev->mode_config.encoder_list,
+ base.head) {
+
+ if (&other_encoder->new_crtc->base != crtc ||
+ encoder == other_encoder)
+ continue;
+ else
+ return true;
+ }
+
+ return false;
+}
+
static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
struct drm_crtc *crtc)
{
return false;
}
-static int
-intel_crtc_helper_disable(struct drm_crtc *crtc)
+static void
+intel_crtc_prepare_encoders(struct drm_device *dev)
{
- struct drm_device *dev = crtc->dev;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
+ struct intel_encoder *encoder;
- /* Decouple all encoders and their attached connectors from this crtc */
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (encoder->crtc != crtc)
- continue;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
+ /* Disable unused encoders */
+ if (encoder->base.crtc == NULL)
+ encoder->disable(encoder);
+ }
+}
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector->encoder != encoder)
- continue;
+/**
+ * intel_modeset_update_staged_output_state
+ *
+ * Updates the staged output configuration state, e.g. after we've read out the
+ * current hw state.
+ */
+static void intel_modeset_update_staged_output_state(struct drm_device *dev)
+{
+ struct intel_encoder *encoder;
+ struct intel_connector *connector;
- connector->encoder = NULL;
- }
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ base.head) {
+ connector->new_encoder =
+ to_intel_encoder(connector->base.encoder);
}
- drm_helper_disable_unused_functions(dev);
- return 0;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+ base.head) {
+ encoder->new_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ }
}
-static void
-intel_crtc_prepare_encoders(struct drm_device *dev)
+/**
+ * intel_modeset_commit_output_state
+ *
+ * This function copies the stage display pipe configuration to the real one.
+ */
+static void intel_modeset_commit_output_state(struct drm_device *dev)
{
struct intel_encoder *encoder;
+ struct intel_connector *connector;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
- /* Disable unused encoders */
- if (encoder->base.crtc == NULL)
- encoder->disable(encoder);
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ base.head) {
+ connector->base.encoder = &connector->new_encoder->base;
+ }
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+ base.head) {
+ encoder->base.crtc = &encoder->new_crtc->base;
}
}
-bool intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *old_fb)
+static struct drm_display_mode *
+intel_modeset_adjusted_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
+ struct drm_display_mode *adjusted_mode;
struct drm_encoder_helper_funcs *encoder_funcs;
- int saved_x, saved_y;
- struct drm_encoder *encoder;
- bool ret = true;
-
- crtc->enabled = drm_helper_crtc_in_use(crtc);
- if (!crtc->enabled)
- return true;
+ struct intel_encoder *encoder;
adjusted_mode = drm_mode_duplicate(dev, mode);
if (!adjusted_mode)
- return false;
-
- saved_hwmode = crtc->hwmode;
- saved_mode = crtc->mode;
- saved_x = crtc->x;
- saved_y = crtc->y;
-
- /* Update crtc values up front so the driver can rely on them for mode
- * setting.
- */
- crtc->mode = *mode;
- crtc->x = x;
- crtc->y = y;
+ return ERR_PTR(-ENOMEM);
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
*/
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+ base.head) {
- if (encoder->crtc != crtc)
+ if (&encoder->new_crtc->base != crtc)
continue;
- encoder_funcs = encoder->helper_private;
- if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
- adjusted_mode))) {
+ encoder_funcs = encoder->base.helper_private;
+ if (!(encoder_funcs->mode_fixup(&encoder->base, mode,
+ adjusted_mode))) {
DRM_DEBUG_KMS("Encoder fixup failed\n");
- goto done;
+ goto fail;
}
}
- if (!(ret = intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
+ if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
DRM_DEBUG_KMS("CRTC fixup failed\n");
- goto done;
+ goto fail;
}
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
- intel_crtc_prepare_encoders(dev);
+ return adjusted_mode;
+fail:
+ drm_mode_destroy(dev, adjusted_mode);
+ return ERR_PTR(-EINVAL);
+}
+
+/* Computes which crtcs are affected and sets the relevant bits in the mask. For
+ * simplicity we use the crtc's pipe number (because it's easier to obtain). */
+static void
+intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
+ unsigned *prepare_pipes, unsigned *disable_pipes)
+{
+ struct intel_crtc *intel_crtc;
+ struct drm_device *dev = crtc->dev;
+ struct intel_encoder *encoder;
+ struct intel_connector *connector;
+ struct drm_crtc *tmp_crtc;
+
+ *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
- dev_priv->display.crtc_disable(crtc);
+ /* Check which crtcs have changed outputs connected to them, these need
+ * to be part of the prepare_pipes mask. We don't (yet) support global
+ * modeset across multiple crtcs, so modeset_pipes will only have one
+ * bit set at most. */
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ base.head) {
+ if (connector->base.encoder == &connector->new_encoder->base)
+ continue;
+
+ if (connector->base.encoder) {
+ tmp_crtc = connector->base.encoder->crtc;
+
+ *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
+ }
+
+ if (connector->new_encoder)
+ *prepare_pipes |=
+ 1 << connector->new_encoder->new_crtc->pipe;
+ }
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+ base.head) {
+ if (encoder->base.crtc == &encoder->new_crtc->base)
+ continue;
+
+ if (encoder->base.crtc) {
+ tmp_crtc = encoder->base.crtc;
+
+ *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
+ }
+
+ if (encoder->new_crtc)
+ *prepare_pipes |= 1 << encoder->new_crtc->pipe;
+ }
+
+ /* Check for any pipes that will be fully disabled ... */
+ list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ bool used = false;
+
+ /* Don't try to disable disabled crtcs. */
+ if (!intel_crtc->base.enabled)
+ continue;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+ base.head) {
+ if (encoder->new_crtc == intel_crtc)
+ used = true;
+ }
+
+ if (!used)
+ *disable_pipes |= 1 << intel_crtc->pipe;
+ }
+
+
+ /* set_mode is also used to update properties on life display pipes. */
+ intel_crtc = to_intel_crtc(crtc);
+ if (crtc->enabled)
+ *prepare_pipes |= 1 << intel_crtc->pipe;
+
+ /* We only support modeset on one single crtc, hence we need to do that
+ * only for the passed in crtc iff we change anything else than just
+ * disable crtcs.
+ *
+ * This is actually not true, to be fully compatible with the old crtc
+ * helper we automatically disable _any_ output (i.e. doesn't need to be
+ * connected to the crtc we're modesetting on) if it's disconnected.
+ * Which is a rather nutty api (since changed the output configuration
+ * without userspace's explicit request can lead to confusion), but
+ * alas. Hence we currently need to modeset on all pipes we prepare. */
+ if (*prepare_pipes)
+ *modeset_pipes = *prepare_pipes;
+
+ /* ... and mask these out. */
+ *modeset_pipes &= ~(*disable_pipes);
+ *prepare_pipes &= ~(*disable_pipes);
+}
+
+#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
+ list_for_each_entry((intel_crtc), \
+ &(dev)->mode_config.crtc_list, \
+ base.head) \
+ if (mask & (1 <<(intel_crtc)->pipe)) \
+
+bool intel_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb)
+{
+ struct drm_device *dev = crtc->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ struct drm_encoder *encoder;
+ struct intel_crtc *intel_crtc;
+ unsigned disable_pipes, prepare_pipes, modeset_pipes;
+ bool ret = true;
+
+ intel_modeset_affected_pipes(crtc, &modeset_pipes,
+ &prepare_pipes, &disable_pipes);
+
+ DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
+ modeset_pipes, prepare_pipes, disable_pipes);
+
+ for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
+ intel_crtc_disable(&intel_crtc->base);
+
+ intel_modeset_commit_output_state(dev);
+
+ list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
+ base.head)
+ intel_crtc->base.enabled = drm_helper_crtc_in_use(crtc);
+
+ saved_hwmode = crtc->hwmode;
+ saved_mode = crtc->mode;
+
+ /* Hack: Because we don't (yet) support global modeset on multiple
+ * crtcs, we don't keep track of the new mode for more than one crtc.
+ * Hence simply check whether any bit is set in modeset_pipes in all the
+ * pieces of code that are not yet converted to deal with mutliple crtcs
+ * changing their mode at the same time. */
+ adjusted_mode = NULL;
+ if (modeset_pipes) {
+ adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
+ if (IS_ERR(adjusted_mode)) {
+ return false;
+ }
+
+ intel_crtc_prepare_encoders(dev);
+ }
+
+ for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
+ dev_priv->display.crtc_disable(&intel_crtc->base);
+
+ if (modeset_pipes) {
+ crtc->mode = *mode;
+ crtc->x = x;
+ crtc->y = y;
+ }
/* Set up the DPLL and any encoders state that needs to adjust or depend
* on the DPLL.
*/
- ret = !intel_crtc_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
- if (!ret)
- goto done;
+ for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
+ ret = !intel_crtc_mode_set(&intel_crtc->base,
+ mode, adjusted_mode,
+ x, y, fb);
+ if (!ret)
+ goto done;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (encoder->crtc != crtc)
- continue;
+ if (encoder->crtc != &intel_crtc->base)
+ continue;
- DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
- encoder->base.id, drm_get_encoder_name(encoder),
- mode->base.id, mode->name);
- encoder_funcs = encoder->helper_private;
- encoder_funcs->mode_set(encoder, mode, adjusted_mode);
+ DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
+ encoder->base.id, drm_get_encoder_name(encoder),
+ mode->base.id, mode->name);
+ encoder_funcs = encoder->helper_private;
+ encoder_funcs->mode_set(encoder, mode, adjusted_mode);
+ }
}
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
- dev_priv->display.crtc_enable(crtc);
+ for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
+ dev_priv->display.crtc_enable(&intel_crtc->base);
- /* Store real post-adjustment hardware mode. */
- crtc->hwmode = *adjusted_mode;
+ if (modeset_pipes) {
+ /* Store real post-adjustment hardware mode. */
+ crtc->hwmode = *adjusted_mode;
- /* Calculate and store various constants which
- * are later needed by vblank and swap-completion
- * timestamping. They are derived from true hwmode.
- */
- drm_calc_timestamping_constants(crtc);
+ /* Calculate and store various constants which
+ * are later needed by vblank and swap-completion
+ * timestamping. They are derived from true hwmode.
+ */
+ drm_calc_timestamping_constants(crtc);
+ }
/* FIXME: add subpixel order */
done:
drm_mode_destroy(dev, adjusted_mode);
- if (!ret) {
+ if (!ret && crtc->enabled) {
crtc->hwmode = saved_hwmode;
crtc->mode = saved_mode;
- crtc->x = saved_x;
- crtc->y = saved_y;
}
return ret;
}
-static int intel_crtc_set_config(struct drm_mode_set *set)
-{
- struct drm_device *dev;
- struct drm_crtc *save_crtcs, *new_crtc, *crtc;
- struct drm_encoder *save_encoders, *new_encoder, *encoder;
- struct drm_framebuffer *old_fb = NULL;
- bool mode_changed = false; /* if true do a full mode set */
- bool fb_changed = false; /* if true and !mode_changed just do a flip */
- struct drm_connector *save_connectors, *connector;
- int count = 0, ro;
- struct drm_mode_set save_set;
- int ret;
- int i;
-
- DRM_DEBUG_KMS("\n");
-
- if (!set)
- return -EINVAL;
-
- if (!set->crtc)
- return -EINVAL;
-
- if (!set->crtc->helper_private)
- return -EINVAL;
-
- if (!set->mode)
- set->fb = NULL;
+#undef for_each_intel_crtc_masked
- if (set->fb) {
- DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
- set->crtc->base.id, set->fb->base.id,
- (int)set->num_connectors, set->x, set->y);
- } else {
- DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
- return intel_crtc_helper_disable(set->crtc);
- }
+static void intel_set_config_free(struct intel_set_config *config)
+{
+ if (!config)
+ return;
- dev = set->crtc->dev;
+ kfree(config->save_connector_encoders);
+ kfree(config->save_encoder_crtcs);
+ kfree(config);
+}
- /* Allocate space for the backup of all (non-pointer) crtc, encoder and
- * connector data. */
- save_crtcs = kzalloc(dev->mode_config.num_crtc *
- sizeof(struct drm_crtc), GFP_KERNEL);
- if (!save_crtcs)
- return -ENOMEM;
+static int intel_set_config_save_state(struct drm_device *dev,
+ struct intel_set_config *config)
+{
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+ int count;
- save_encoders = kzalloc(dev->mode_config.num_encoder *
- sizeof(struct drm_encoder), GFP_KERNEL);
- if (!save_encoders) {
- kfree(save_crtcs);
+ config->save_encoder_crtcs =
+ kcalloc(dev->mode_config.num_encoder,
+ sizeof(struct drm_crtc *), GFP_KERNEL);
+ if (!config->save_encoder_crtcs)
return -ENOMEM;
- }
- save_connectors = kzalloc(dev->mode_config.num_connector *
- sizeof(struct drm_connector), GFP_KERNEL);
- if (!save_connectors) {
- kfree(save_crtcs);
- kfree(save_encoders);
+ config->save_connector_encoders =
+ kcalloc(dev->mode_config.num_connector,
+ sizeof(struct drm_encoder *), GFP_KERNEL);
+ if (!config->save_connector_encoders)
return -ENOMEM;
- }
/* Copy data. Note that driver private data is not affected.
* Should anything bad happen only the expected state is
* restored, not the drivers personal bookkeeping.
*/
count = 0;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- save_crtcs[count++] = *crtc;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ config->save_encoder_crtcs[count++] = encoder->crtc;
}
count = 0;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- save_encoders[count++] = *encoder;
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ config->save_connector_encoders[count++] = connector->encoder;
}
+ return 0;
+}
+
+static void intel_set_config_restore_state(struct drm_device *dev,
+ struct intel_set_config *config)
+{
+ struct intel_encoder *encoder;
+ struct intel_connector *connector;
+ int count;
+
count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- save_connectors[count++] = *connector;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
+ encoder->new_crtc =
+ to_intel_crtc(config->save_encoder_crtcs[count++]);
}
- save_set.crtc = set->crtc;
- save_set.mode = &set->crtc->mode;
- save_set.x = set->crtc->x;
- save_set.y = set->crtc->y;
- save_set.fb = set->crtc->fb;
+ count = 0;
+ list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
+ connector->new_encoder =
+ to_intel_encoder(config->save_connector_encoders[count++]);
+ }
+}
+
+static void
+intel_set_config_compute_mode_changes(struct drm_mode_set *set,
+ struct intel_set_config *config)
+{
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
/* If we have no fb then treat it as a full mode set */
if (set->crtc->fb == NULL) {
DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
- mode_changed = true;
+ config->mode_changed = true;
} else if (set->fb == NULL) {
- mode_changed = true;
+ config->mode_changed = true;
} else if (set->fb->depth != set->crtc->fb->depth) {
- mode_changed = true;
+ config->mode_changed = true;
} else if (set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) {
- mode_changed = true;
+ config->mode_changed = true;
} else
- fb_changed = true;
+ config->fb_changed = true;
}
- if (set->x != set->crtc->x || set->y != set->crtc->y)
- fb_changed = true;
+ if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
+ config->fb_changed = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
DRM_DEBUG_KMS("modes are different, full mode set\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
- mode_changed = true;
+ config->mode_changed = true;
}
+}
+
+static int
+intel_modeset_stage_output_state(struct drm_device *dev,
+ struct drm_mode_set *set,
+ struct intel_set_config *config)
+{
+ struct drm_crtc *new_crtc;
+ struct intel_connector *connector;
+ struct intel_encoder *encoder;
+ int count, ro;
+
+ /* The upper layers ensure that we either disabl a crtc or have a list
+ * of connectors. For paranoia, double-check this. */
+ WARN_ON(!set->fb && (set->num_connectors != 0));
+ WARN_ON(set->fb && (set->num_connectors == 0));
- /* a) traverse passed in connector list and get encoders for them */
count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- new_encoder = connector->encoder;
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ base.head) {
+ /* Otherwise traverse passed in connector list and get encoders
+ * for them. */
for (ro = 0; ro < set->num_connectors; ro++) {
- if (set->connectors[ro] == connector) {
- new_encoder =
- &intel_attached_encoder(connector)->base;
+ if (set->connectors[ro] == &connector->base) {
+ connector->new_encoder = connector->encoder;
break;
}
}
- if (new_encoder != connector->encoder) {
+ /* If we disable the crtc, disable all its connectors. Also, if
+ * the connector is on the changing crtc but not on the new
+ * connector list, disable it. */
+ if ((!set->fb || ro == set->num_connectors) &&
+ connector->base.encoder &&
+ connector->base.encoder->crtc == set->crtc) {
+ connector->new_encoder = NULL;
+
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
+ connector->base.base.id,
+ drm_get_connector_name(&connector->base));
+ }
+
+
+ if (&connector->new_encoder->base != connector->base.encoder) {
DRM_DEBUG_KMS("encoder changed, full mode switch\n");
- mode_changed = true;
- /* If the encoder is reused for another connector, then
- * the appropriate crtc will be set later.
- */
- if (connector->encoder)
- connector->encoder->crtc = NULL;
- connector->encoder = new_encoder;
+ config->mode_changed = true;
}
+
+ /* Disable all disconnected encoders. */
+ if (connector->base.status == connector_status_disconnected)
+ connector->new_encoder = NULL;
}
+ /* connector->new_encoder is now updated for all connectors. */
+ /* Update crtc of enabled connectors. */
count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder)
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ base.head) {
+ if (!connector->new_encoder)
continue;
- if (connector->encoder->crtc == set->crtc)
- new_crtc = NULL;
- else
- new_crtc = connector->encoder->crtc;
+ new_crtc = connector->new_encoder->base.crtc;
for (ro = 0; ro < set->num_connectors; ro++) {
- if (set->connectors[ro] == connector)
+ if (set->connectors[ro] == &connector->base)
new_crtc = set->crtc;
}
/* Make sure the new CRTC will work with the encoder */
- if (new_crtc &&
- !intel_encoder_crtc_ok(connector->encoder, new_crtc)) {
- ret = -EINVAL;
- goto fail;
+ if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
+ new_crtc)) {
+ return -EINVAL;
}
- if (new_crtc != connector->encoder->crtc) {
- DRM_DEBUG_KMS("crtc changed, full mode switch\n");
- mode_changed = true;
- connector->encoder->crtc = new_crtc;
+ connector->encoder->new_crtc = to_intel_crtc(new_crtc);
+
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
+ connector->base.base.id,
+ drm_get_connector_name(&connector->base),
+ new_crtc->base.id);
+ }
+
+ /* Check for any encoders that needs to be disabled. */
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+ base.head) {
+ list_for_each_entry(connector,
+ &dev->mode_config.connector_list,
+ base.head) {
+ if (connector->new_encoder == encoder) {
+ WARN_ON(!connector->new_encoder->new_crtc);
+
+ goto next_encoder;
+ }
}
- if (new_crtc) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
- connector->base.id, drm_get_connector_name(connector),
- new_crtc->base.id);
- } else {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
- connector->base.id, drm_get_connector_name(connector));
+ encoder->new_crtc = NULL;
+next_encoder:
+ /* Only now check for crtc changes so we don't miss encoders
+ * that will be disabled. */
+ if (&encoder->new_crtc->base != encoder->base.crtc) {
+ DRM_DEBUG_KMS("crtc changed, full mode switch\n");
+ config->mode_changed = true;
}
}
+ /* Now we've also updated encoder->new_crtc for all encoders. */
- if (mode_changed) {
- set->crtc->enabled = drm_helper_crtc_in_use(set->crtc);
- if (set->crtc->enabled) {
+ return 0;
+}
+
+static int intel_crtc_set_config(struct drm_mode_set *set)
+{
+ struct drm_device *dev;
+ struct drm_mode_set save_set;
+ struct intel_set_config *config;
+ int ret;
+ int i;
+
+ BUG_ON(!set);
+ BUG_ON(!set->crtc);
+ BUG_ON(!set->crtc->helper_private);
+
+ if (!set->mode)
+ set->fb = NULL;
+
+ /* The fb helper likes to play gross jokes with ->mode_set_config.
+ * Unfortunately the crtc helper doesn't do much at all for this case,
+ * so we have to cope with this madness until the fb helper is fixed up. */
+ if (set->fb && set->num_connectors == 0)
+ return 0;
+
+ if (set->fb) {
+ DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
+ set->crtc->base.id, set->fb->base.id,
+ (int)set->num_connectors, set->x, set->y);
+ } else {
+ DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
+ }
+
+ dev = set->crtc->dev;
+
+ ret = -ENOMEM;
+ config = kzalloc(sizeof(*config), GFP_KERNEL);
+ if (!config)
+ goto out_config;
+
+ ret = intel_set_config_save_state(dev, config);
+ if (ret)
+ goto out_config;
+
+ save_set.crtc = set->crtc;
+ save_set.mode = &set->crtc->mode;
+ save_set.x = set->crtc->x;
+ save_set.y = set->crtc->y;
+ save_set.fb = set->crtc->fb;
+
+ /* Compute whether we need a full modeset, only an fb base update or no
+ * change at all. In the future we might also check whether only the
+ * mode changed, e.g. for LVDS where we only change the panel fitter in
+ * such cases. */
+ intel_set_config_compute_mode_changes(set, config);
+
+ ret = intel_modeset_stage_output_state(dev, set, config);
+ if (ret)
+ goto fail;
+
+ if (config->mode_changed) {
+ if (set->mode) {
DRM_DEBUG_KMS("attempting to set mode from"
" userspace\n");
drm_mode_debug_printmodeline(set->mode);
- old_fb = set->crtc->fb;
- set->crtc->fb = set->fb;
- if (!intel_set_mode(set->crtc, set->mode,
- set->x, set->y, old_fb)) {
- DRM_ERROR("failed to set mode on [CRTC:%d]\n",
- set->crtc->base.id);
- set->crtc->fb = old_fb;
- ret = -EINVAL;
- goto fail;
- }
+ }
+
+ if (!intel_set_mode(set->crtc, set->mode,
+ set->x, set->y, set->fb)) {
+ DRM_ERROR("failed to set mode on [CRTC:%d]\n",
+ set->crtc->base.id);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ if (set->crtc->enabled) {
DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
for (i = 0; i < set->num_connectors; i++) {
DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
}
}
- drm_helper_disable_unused_functions(dev);
- } else if (fb_changed) {
- set->crtc->x = set->x;
- set->crtc->y = set->y;
-
- old_fb = set->crtc->fb;
- if (set->crtc->fb != set->fb)
- set->crtc->fb = set->fb;
+ } else if (config->fb_changed) {
ret = intel_pipe_set_base(set->crtc,
- set->x, set->y, old_fb);
- if (ret != 0) {
- set->crtc->fb = old_fb;
- goto fail;
- }
+ set->x, set->y, set->fb);
}
- kfree(save_connectors);
- kfree(save_encoders);
- kfree(save_crtcs);
+ intel_set_config_free(config);
+
return 0;
fail:
- /* Restore all previous data. */
- count = 0;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- *crtc = save_crtcs[count++];
- }
-
- count = 0;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- *encoder = save_encoders[count++];
- }
-
- count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- *connector = save_connectors[count++];
- }
+ intel_set_config_restore_state(dev, config);
/* Try to restore the config */
- if (mode_changed &&
+ if (config->mode_changed &&
!intel_set_mode(save_set.crtc, save_set.mode,
save_set.x, save_set.y, save_set.fb))
DRM_ERROR("failed to restore config after modeset failure\n");
- kfree(save_connectors);
- kfree(save_encoders);
- kfree(save_crtcs);
+out_config:
+ intel_set_config_free(config);
return ret;
}
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
intel_sanitize_crtc(crtc);
}
+
+ intel_modeset_update_staged_output_state(dev);
}
void intel_modeset_gem_init(struct drm_device *dev)
projects / ~andy / linux / blobdiff