#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
+ ADPA_CRT_HOTPLUG_WARMUP_10MS | \
+ ADPA_CRT_HOTPLUG_SAMPLE_4S | \
+ ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
+ ADPA_CRT_HOTPLUG_VOLREF_325MV | \
+ ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+ struct intel_encoder base;
+ bool force_hotplug_required;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+ return container_of(intel_attached_encoder(connector),
+ struct intel_crt, base);
+}
+
static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
}
- adpa = 0;
+ adpa = ADPA_HOTPLUG_BITS;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
adpa |= ADPA_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 adpa, temp;
+ u32 adpa;
bool ret;
- bool turn_off_dac = false;
- temp = adpa = I915_READ(PCH_ADPA);
+ /* The first time through, trigger an explicit detection cycle */
+ if (crt->force_hotplug_required) {
+ bool turn_off_dac = HAS_PCH_SPLIT(dev);
+ u32 save_adpa;
- if (HAS_PCH_SPLIT(dev))
- turn_off_dac = true;
-
- adpa &= ~ADPA_CRT_HOTPLUG_MASK;
- if (turn_off_dac)
- adpa &= ~ADPA_DAC_ENABLE;
-
- /* disable HPD first */
- I915_WRITE(PCH_ADPA, adpa);
- (void)I915_READ(PCH_ADPA);
-
- adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
- ADPA_CRT_HOTPLUG_WARMUP_10MS |
- ADPA_CRT_HOTPLUG_SAMPLE_4S |
- ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
- ADPA_CRT_HOTPLUG_VOLREF_325MV |
- ADPA_CRT_HOTPLUG_ENABLE |
- ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
-
- DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
- I915_WRITE(PCH_ADPA, adpa);
-
- if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
- 1000))
- DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
-
- if (turn_off_dac) {
- /* Make sure hotplug is enabled */
- I915_WRITE(PCH_ADPA, temp | ADPA_CRT_HOTPLUG_ENABLE);
- (void)I915_READ(PCH_ADPA);
+ crt->force_hotplug_required = 0;
+
+ save_adpa = adpa = I915_READ(PCH_ADPA);
+ DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+ adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+ if (turn_off_dac)
+ adpa &= ~ADPA_DAC_ENABLE;
+
+ I915_WRITE(PCH_ADPA, adpa);
+
+ if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+ 1000))
+ DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+ if (turn_off_dac) {
+ I915_WRITE(PCH_ADPA, save_adpa);
+ POSTING_READ(PCH_ADPA);
+ }
}
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(PCH_ADPA);
- adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
- if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
- (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+ if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
ret = true;
else
ret = false;
+ DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
return ret;
}
return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
}
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
- struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
- struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+ struct intel_crt *crt = intel_attached_crt(connector);
+ struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
/* CRT should always be at 0, but check anyway */
- if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+ if (crt->base.type != INTEL_OUTPUT_ANALOG)
return false;
if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
return true;
}
- if (intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin)) {
- DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
- return true;
+ if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
+ struct edid *edid;
+ bool is_digital = false;
+
+ edid = drm_get_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ /*
+ * This may be a DVI-I connector with a shared DDC
+ * link between analog and digital outputs, so we
+ * have to check the EDID input spec of the attached device.
+ */
+ if (edid != NULL) {
+ is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+ connector->display_info.raw_edid = NULL;
+ kfree(edid);
+ }
+
+ if (!is_digital) {
+ DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+ return true;
+ }
}
return false;
}
static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
{
- struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_encoder *encoder = &crt->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
- struct intel_encoder *encoder = intel_attached_encoder(connector);
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_crtc *crtc;
int dpms_mode;
enum drm_connector_status status;
if (intel_crt_detect_hotplug(connector)) {
DRM_DEBUG_KMS("CRT detected via hotplug\n");
return connector_status_connected;
- } else
+ } else {
+ DRM_DEBUG_KMS("CRT not detected via hotplug\n");
return connector_status_disconnected;
+ }
}
- if (intel_crt_detect_ddc(&encoder->base))
+ if (intel_crt_detect_ddc(connector))
return connector_status_connected;
if (!force)
return connector->status;
/* for pre-945g platforms use load detect */
- if (encoder->base.crtc && encoder->base.crtc->enabled) {
- status = intel_crt_load_detect(encoder->base.crtc, encoder);
+ crtc = crt->base.base.crtc;
+ if (crtc && crtc->enabled) {
+ status = intel_crt_load_detect(crtc, crt);
} else {
- crtc = intel_get_load_detect_pipe(encoder, connector,
+ crtc = intel_get_load_detect_pipe(&crt->base, connector,
NULL, &dpms_mode);
if (crtc) {
- if (intel_crt_detect_ddc(&encoder->base))
+ if (intel_crt_detect_ddc(connector))
status = connector_status_connected;
else
- status = intel_crt_load_detect(crtc, encoder);
- intel_release_load_detect_pipe(encoder,
+ status = intel_crt_load_detect(crtc, crt);
+ intel_release_load_detect_pipe(&crt->base,
connector, dpms_mode);
} else
status = connector_status_unknown;
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_encoder *intel_encoder;
+ struct intel_crt *crt;
struct intel_connector *intel_connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
- if (!intel_encoder)
+ crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+ if (!crt)
return;
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
- kfree(intel_encoder);
+ kfree(crt);
return;
}
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
- drm_encoder_init(dev, &intel_encoder->base, &intel_crt_enc_funcs,
+ drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- intel_connector_attach_encoder(intel_connector, intel_encoder);
+ intel_connector_attach_encoder(intel_connector, &crt->base);
- intel_encoder->type = INTEL_OUTPUT_ANALOG;
- intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT) |
- (1 << INTEL_SDVO_LVDS_CLONE_BIT);
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ crt->base.type = INTEL_OUTPUT_ANALOG;
+ crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+ 1 << INTEL_ANALOG_CLONE_BIT |
+ 1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ crt->base.crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
- drm_encoder_helper_add(&intel_encoder->base, &intel_crt_helper_funcs);
+ drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
else
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ /*
+ * Configure the automatic hotplug detection stuff
+ */
+ crt->force_hotplug_required = 0;
+ if (HAS_PCH_SPLIT(dev)) {
+ u32 adpa;
+
+ adpa = I915_READ(PCH_ADPA);
+ adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+ adpa |= ADPA_HOTPLUG_BITS;
+ I915_WRITE(PCH_ADPA, adpa);
+ POSTING_READ(PCH_ADPA);
+
+ DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+ crt->force_hotplug_required = 1;
+ }
+
dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
}
projects / ~andy / linux / blobdiff