Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

[~andy/linux] / drivers / gpio / gpio-ich.c

diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index de3c317bd3e2d46f788c09d4af95a68dbbc97c69..e16d932fd444a924793f63cfb6c2be46a76106cc 100644 (file)
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -130,14 +130,11 @@ static int ichx_read_bit(int reg, unsigned nr)
 
 static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
 {
-       return ichx_priv.use_gpio & (1 << (nr / 32));
+       return !!(ichx_priv.use_gpio & (1 << (nr / 32)));
 }
 
 static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 {
-       if (!ichx_gpio_check_available(gpio, nr))
-               return -ENXIO;
-
        /*
         * Try setting pin as an input and verify it worked since many pins
         * are output-only.
@@ -151,9 +148,6 @@ static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
                                        int val)
 {
-       if (!ichx_gpio_check_available(gpio, nr))
-               return -ENXIO;
-
        /* Set GPIO output value. */
        ichx_write_bit(GPIO_LVL, nr, val, 0);
 
@@ -169,9 +163,6 @@ static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 
 static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr)
 {
-       if (!ichx_gpio_check_available(chip, nr))
-               return -ENXIO;
-
        return ichx_read_bit(GPIO_LVL, nr);
 }
 
@@ -180,9 +171,6 @@ static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
        unsigned long flags;
        u32 data;
 
-       if (!ichx_gpio_check_available(chip, nr))
-               return -ENXIO;
-
        /*
         * GPI 0 - 15 need to be read from the power management registers on
         * a ICH6/3100 bridge.
@@ -207,6 +195,9 @@ static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
 
 static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr)
 {
+       if (!ichx_gpio_check_available(chip, nr))
+               return -ENXIO;
+
        /*
         * Note we assume the BIOS properly set a bridge's USE value.  Some
         * chips (eg Intel 3100) have bogus USE values though, so first see if