#include "amd64_edac.h"
+#include <asm/k8.h>
static struct edac_pci_ctl_info *amd64_ctl_pci;
static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
int bit;
- enum dev_type edac_cap = EDAC_NONE;
+ enum dev_type edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
? 19
: 17;
- if (pvt->dclr0 >> BIT(bit))
+ if (pvt->dclr0 & BIT(bit))
edac_cap = EDAC_FLAG_SECDED;
return edac_cap;
if (channels == 0)
channels = 1;
- debugf0("DIMM count= %d\n", channels);
+ debugf0("MCT channel count: %d\n", channels);
return channels;
" Use of the override can cause "
"unknown side effects.\n");
ret = -ENODEV;
- }
+ } else
+ /*
+ * enable further driver loading if ECC enable is
+ * overridden.
+ */
+ ret = 0;
} else {
amd64_printk(KERN_INFO,
"ECC is enabled by BIOS, Proceeding "
return ret;
}
+struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
+ ARRAY_SIZE(amd64_inj_attrs) +
+ 1];
+
+struct mcidev_sysfs_attribute terminator = { .attr = { .name = NULL } };
+
+static void amd64_set_mc_sysfs_attributes(struct mem_ctl_info *mci)
+{
+ unsigned int i = 0, j = 0;
+
+ for (; i < ARRAY_SIZE(amd64_dbg_attrs); i++)
+ sysfs_attrs[i] = amd64_dbg_attrs[i];
+
+ for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++)
+ sysfs_attrs[i] = amd64_inj_attrs[j];
+
+ sysfs_attrs[i] = terminator;
+
+ mci->mc_driver_sysfs_attributes = sysfs_attrs;
+}
+
+static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+
+ mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE;
+
+ if (pvt->nbcap & K8_NBCAP_SECDED)
+ mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
+
+ if (pvt->nbcap & K8_NBCAP_CHIPKILL)
+ mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
+
+ mci->edac_cap = amd64_determine_edac_cap(pvt);
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = EDAC_AMD64_VERSION;
+ mci->ctl_name = get_amd_family_name(pvt->mc_type_index);
+ mci->dev_name = pci_name(pvt->dram_f2_ctl);
+ mci->ctl_page_to_phys = NULL;
+
+ /* IMPORTANT: Set the polling 'check' function in this module */
+ mci->edac_check = amd64_check;
+
+ /* memory scrubber interface */
+ mci->set_sdram_scrub_rate = amd64_set_scrub_rate;
+ mci->get_sdram_scrub_rate = amd64_get_scrub_rate;
+}
+
+/*
+ * Init stuff for this DRAM Controller device.
+ *
+ * Due to a hardware feature on Fam10h CPUs, the Enable Extended Configuration
+ * Space feature MUST be enabled on ALL Processors prior to actually reading
+ * from the ECS registers. Since the loading of the module can occur on any
+ * 'core', and cores don't 'see' all the other processors ECS data when the
+ * others are NOT enabled. Our solution is to first enable ECS access in this
+ * routine on all processors, gather some data in a amd64_pvt structure and
+ * later come back in a finish-setup function to perform that final
+ * initialization. See also amd64_init_2nd_stage() for that.
+ */
+static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl,
+ int mc_type_index)
+{
+ struct amd64_pvt *pvt = NULL;
+ int err = 0, ret;
+
+ ret = -ENOMEM;
+ pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL);
+ if (!pvt)
+ goto err_exit;
+
+ pvt->mc_node_id = get_node_id(dram_f2_ctl);
+
+ pvt->dram_f2_ctl = dram_f2_ctl;
+ pvt->ext_model = boot_cpu_data.x86_model >> 4;
+ pvt->mc_type_index = mc_type_index;
+ pvt->ops = family_ops(mc_type_index);
+ pvt->old_mcgctl = 0;
+
+ /*
+ * We have the dram_f2_ctl device as an argument, now go reserve its
+ * sibling devices from the PCI system.
+ */
+ ret = -ENODEV;
+ err = amd64_reserve_mc_sibling_devices(pvt, mc_type_index);
+ if (err)
+ goto err_free;
+
+ ret = -EINVAL;
+ err = amd64_check_ecc_enabled(pvt);
+ if (err)
+ goto err_put;
+
+ /*
+ * Key operation here: setup of HW prior to performing ops on it. Some
+ * setup is required to access ECS data. After this is performed, the
+ * 'teardown' function must be called upon error and normal exit paths.
+ */
+ if (boot_cpu_data.x86 >= 0x10)
+ amd64_setup(pvt);
+
+ /*
+ * Save the pointer to the private data for use in 2nd initialization
+ * stage
+ */
+ pvt_lookup[pvt->mc_node_id] = pvt;
+
+ return 0;
+
+err_put:
+ amd64_free_mc_sibling_devices(pvt);
+
+err_free:
+ kfree(pvt);
+
+err_exit:
+ return ret;
+}
+
+/*
+ * This is the finishing stage of the init code. Needs to be performed after all
+ * MCs' hardware have been prepped for accessing extended config space.
+ */
+static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
+{
+ int node_id = pvt->mc_node_id;
+ struct mem_ctl_info *mci;
+ int ret, err = 0;
+
+ amd64_read_mc_registers(pvt);
+
+ ret = -ENODEV;
+ if (pvt->ops->probe_valid_hardware) {
+ err = pvt->ops->probe_valid_hardware(pvt);
+ if (err)
+ goto err_exit;
+ }
+
+ /*
+ * We need to determine how many memory channels there are. Then use
+ * that information for calculating the size of the dynamic instance
+ * tables in the 'mci' structure
+ */
+ pvt->channel_count = pvt->ops->early_channel_count(pvt);
+ if (pvt->channel_count < 0)
+ goto err_exit;
+
+ ret = -ENOMEM;
+ mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+ if (!mci)
+ goto err_exit;
+
+ mci->pvt_info = pvt;
+
+ mci->dev = &pvt->dram_f2_ctl->dev;
+ amd64_setup_mci_misc_attributes(mci);
+
+ if (amd64_init_csrows(mci))
+ mci->edac_cap = EDAC_FLAG_NONE;
+
+ amd64_enable_ecc_error_reporting(mci);
+ amd64_set_mc_sysfs_attributes(mci);
+
+ ret = -ENODEV;
+ if (edac_mc_add_mc(mci)) {
+ debugf1("failed edac_mc_add_mc()\n");
+ goto err_add_mc;
+ }
+
+ mci_lookup[node_id] = mci;
+ pvt_lookup[node_id] = NULL;
+ return 0;
+
+err_add_mc:
+ edac_mc_free(mci);
+
+err_exit:
+ debugf0("failure to init 2nd stage: ret=%d\n", ret);
+
+ amd64_restore_ecc_error_reporting(pvt);
+
+ if (boot_cpu_data.x86 > 0xf)
+ amd64_teardown(pvt);
+
+ amd64_free_mc_sibling_devices(pvt);
+
+ kfree(pvt_lookup[pvt->mc_node_id]);
+ pvt_lookup[node_id] = NULL;
+
+ return ret;
+}
+
+
+static int __devinit amd64_init_one_instance(struct pci_dev *pdev,
+ const struct pci_device_id *mc_type)
+{
+ int ret = 0;
+
+ debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
+ get_amd_family_name(mc_type->driver_data));
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ ret = -EIO;
+ else
+ ret = amd64_probe_one_instance(pdev, mc_type->driver_data);
+
+ if (ret < 0)
+ debugf0("ret=%d\n", ret);
+
+ return ret;
+}
+
+static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct amd64_pvt *pvt;
+
+ /* Remove from EDAC CORE tracking list */
+ mci = edac_mc_del_mc(&pdev->dev);
+ if (!mci)
+ return;
+
+ pvt = mci->pvt_info;
+
+ amd64_restore_ecc_error_reporting(pvt);
+
+ if (boot_cpu_data.x86 > 0xf)
+ amd64_teardown(pvt);
+
+ amd64_free_mc_sibling_devices(pvt);
+
+ kfree(pvt);
+ mci->pvt_info = NULL;
+
+ mci_lookup[pvt->mc_node_id] = NULL;
+
+ /* Free the EDAC CORE resources */
+ edac_mc_free(mci);
+}
+
+/*
+ * This table is part of the interface for loading drivers for PCI devices. The
+ * PCI core identifies what devices are on a system during boot, and then
+ * inquiry this table to see if this driver is for a given device found.
+ */
+static const struct pci_device_id amd64_pci_table[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = K8_CPUS
+ },
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = F10_CPUS
+ },
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_11H_NB_DRAM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = F11_CPUS
+ },
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, amd64_pci_table);
+
+static struct pci_driver amd64_pci_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = amd64_init_one_instance,
+ .remove = __devexit_p(amd64_remove_one_instance),
+ .id_table = amd64_pci_table,
+};
+
+static void amd64_setup_pci_device(void)
+{
+ struct mem_ctl_info *mci;
+ struct amd64_pvt *pvt;
+
+ if (amd64_ctl_pci)
+ return;
+
+ mci = mci_lookup[0];
+ if (mci) {
+
+ pvt = mci->pvt_info;
+ amd64_ctl_pci =
+ edac_pci_create_generic_ctl(&pvt->dram_f2_ctl->dev,
+ EDAC_MOD_STR);
+
+ if (!amd64_ctl_pci) {
+ pr_warning("%s(): Unable to create PCI control\n",
+ __func__);
+
+ pr_warning("%s(): PCI error report via EDAC not set\n",
+ __func__);
+ }
+ }
+}
+
+static int __init amd64_edac_init(void)
+{
+ int nb, err = -ENODEV;
+
+ edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n");
+
+ opstate_init();
+
+ if (cache_k8_northbridges() < 0)
+ goto err_exit;
+
+ err = pci_register_driver(&amd64_pci_driver);
+ if (err)
+ return err;
+
+ /*
+ * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd
+ * amd64_pvt structs. These will be used in the 2nd stage init function
+ * to finish initialization of the MC instances.
+ */
+ for (nb = 0; nb < num_k8_northbridges; nb++) {
+ if (!pvt_lookup[nb])
+ continue;
+
+ err = amd64_init_2nd_stage(pvt_lookup[nb]);
+ if (err)
+ goto err_2nd_stage;
+ }
+
+ amd64_setup_pci_device();
+
+ return 0;
+
+err_2nd_stage:
+ debugf0("2nd stage failed\n");
+
+err_exit:
+ pci_unregister_driver(&amd64_pci_driver);
+
+ return err;
+}
+
+static void __exit amd64_edac_exit(void)
+{
+ if (amd64_ctl_pci)
+ edac_pci_release_generic_ctl(amd64_ctl_pci);
+
+ pci_unregister_driver(&amd64_pci_driver);
+}
+
+module_init(amd64_edac_init);
+module_exit(amd64_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("SoftwareBitMaker: Doug Thompson, "
+ "Dave Peterson, Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for AMD64 memory controllers - "
+ EDAC_AMD64_VERSION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
projects / ~andy / linux / blobdiff