/* PrimeCell DMA extension */
struct burst_table {
- int burstwords;
+ u32 burstwords;
u32 reg;
};
static const struct burst_table burst_sizes[] = {
{
.burstwords = 256,
- .reg = (PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_256,
},
{
.burstwords = 128,
- .reg = (PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_128,
},
{
.burstwords = 64,
- .reg = (PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_64,
},
{
.burstwords = 32,
- .reg = (PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_32,
},
{
.burstwords = 16,
- .reg = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_16,
},
{
.burstwords = 8,
- .reg = (PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_8,
},
{
.burstwords = 4,
- .reg = (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .reg = PL080_BSIZE_4,
},
{
- .burstwords = 1,
- .reg = (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT),
+ .burstwords = 0,
+ .reg = PL080_BSIZE_1,
},
};
+/*
+ * Given the source and destination available bus masks, select which
+ * will be routed to each port. We try to have source and destination
+ * on separate ports, but always respect the allowable settings.
+ */
+static u32 pl08x_select_bus(u8 src, u8 dst)
+{
+ u32 cctl = 0;
+
+ if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
+ cctl |= PL080_CONTROL_DST_AHB2;
+ if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
+ cctl |= PL080_CONTROL_SRC_AHB2;
+
+ return cctl;
+}
+
static u32 pl08x_cctl(u32 cctl)
{
cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
return PL080_WIDTH_16BIT;
case DMA_SLAVE_BUSWIDTH_4_BYTES:
return PL080_WIDTH_32BIT;
+ default:
+ return ~0;
}
- return ~0;
+}
+
+static u32 pl08x_burst(u32 maxburst)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
+ if (burst_sizes[i].burstwords <= maxburst)
+ break;
+
+ return burst_sizes[i].reg;
}
static int dma_set_runtime_config(struct dma_chan *chan,
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
enum dma_slave_buswidth addr_width;
- u32 width, maxburst;
+ u32 width, burst, maxburst;
u32 cctl = 0;
- int i;
if (!plchan->slave)
return -EINVAL;
cctl |= width << PL080_CONTROL_DWIDTH_SHIFT;
/*
- * Now decide on a maxburst:
* If this channel will only request single transfers, set this
* down to ONE element. Also select one element if no maxburst
* is specified.
*/
- if (plchan->cd->single || maxburst == 0) {
- cctl |= (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
- (PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT);
- } else {
- for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
- if (burst_sizes[i].burstwords <= maxburst)
- break;
- cctl |= burst_sizes[i].reg;
- }
+ if (plchan->cd->single)
+ maxburst = 1;
+
+ burst = pl08x_burst(maxburst);
+ cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
+ cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
if (plchan->runtime_direction == DMA_FROM_DEVICE) {
plchan->src_addr = config->src_addr;
- plchan->src_cctl = pl08x_cctl(cctl);
+ plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
+ pl08x_select_bus(plchan->cd->periph_buses,
+ pl08x->mem_buses);
} else {
plchan->dst_addr = config->dst_addr;
- plchan->dst_cctl = pl08x_cctl(cctl);
+ plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR |
+ pl08x_select_bus(pl08x->mem_buses,
+ plchan->cd->periph_buses);
}
dev_dbg(&pl08x->adev->dev,
return 0;
}
-/*
- * Given the source and destination available bus masks, select which
- * will be routed to each port. We try to have source and destination
- * on separate ports, but always respect the allowable settings.
- */
-static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst)
-{
- u32 cctl = 0;
-
- if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
- cctl |= PL080_CONTROL_DST_AHB2;
- if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
- cctl |= PL080_CONTROL_SRC_AHB2;
-
- return cctl;
-}
-
static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
unsigned long flags)
{
txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
if (pl08x->vd->dualmaster)
- txd->cctl |= pl08x_select_bus(pl08x,
- pl08x->mem_buses, pl08x->mem_buses);
+ txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
+ pl08x->mem_buses);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
- u8 src_buses, dst_buses;
int ret;
/*
if (direction == DMA_TO_DEVICE) {
txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- txd->cctl = plchan->dst_cctl | PL080_CONTROL_SRC_INCR;
+ txd->cctl = plchan->dst_cctl;
txd->src_addr = sgl->dma_address;
txd->dst_addr = plchan->dst_addr;
- src_buses = pl08x->mem_buses;
- dst_buses = plchan->cd->periph_buses;
} else if (direction == DMA_FROM_DEVICE) {
txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- txd->cctl = plchan->src_cctl | PL080_CONTROL_DST_INCR;
+ txd->cctl = plchan->src_cctl;
txd->src_addr = plchan->src_addr;
txd->dst_addr = sgl->dma_address;
- src_buses = plchan->cd->periph_buses;
- dst_buses = pl08x->mem_buses;
} else {
dev_err(&pl08x->adev->dev,
"%s direction unsupported\n", __func__);
return NULL;
}
- txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses);
-
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
return mask ? IRQ_HANDLED : IRQ_NONE;
}
+static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
+{
+ u32 cctl = pl08x_cctl(chan->cd->cctl);
+
+ chan->slave = true;
+ chan->name = chan->cd->bus_id;
+ chan->src_addr = chan->cd->addr;
+ chan->dst_addr = chan->cd->addr;
+ chan->src_cctl = cctl | PL080_CONTROL_DST_INCR |
+ pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses);
+ chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR |
+ pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses);
+}
+
/*
* Initialise the DMAC memcpy/slave channels.
* Make a local wrapper to hold required data
chan->state = PL08X_CHAN_IDLE;
if (slave) {
- chan->slave = true;
- chan->name = pl08x->pd->slave_channels[i].bus_id;
chan->cd = &pl08x->pd->slave_channels[i];
- chan->src_addr = chan->cd->addr;
- chan->dst_addr = chan->cd->addr;
- chan->src_cctl = pl08x_cctl(chan->cd->cctl);
- chan->dst_cctl = pl08x_cctl(chan->cd->cctl);
+ pl08x_dma_slave_init(chan);
} else {
chan->cd = &pl08x->pd->memcpy_channel;
chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
projects / ~andy / linux / blobdiff