}
EXPORT_SYMBOL(blk_unplug);
-static void blk_invoke_request_fn(struct request_queue *q)
-{
- if (unlikely(blk_queue_stopped(q)))
- return;
-
- /*
- * one level of recursion is ok and is much faster than kicking
- * the unplug handling
- */
- if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
- q->request_fn(q);
- queue_flag_clear(QUEUE_FLAG_REENTER, q);
- } else {
- queue_flag_set(QUEUE_FLAG_PLUGGED, q);
- kblockd_schedule_work(q, &q->unplug_work);
- }
-}
-
/**
* blk_start_queue - restart a previously stopped queue
* @q: The &struct request_queue in question
WARN_ON(!irqs_disabled());
queue_flag_clear(QUEUE_FLAG_STOPPED, q);
- blk_invoke_request_fn(q);
+ __blk_run_queue(q);
}
EXPORT_SYMBOL(blk_start_queue);
{
blk_remove_plug(q);
+ if (unlikely(blk_queue_stopped(q)))
+ return;
+
+ if (elv_queue_empty(q))
+ return;
+
/*
* Only recurse once to avoid overrunning the stack, let the unplug
* handling reinvoke the handler shortly if we already got there.
*/
- if (!elv_queue_empty(q))
- blk_invoke_request_fn(q);
+ if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
+ q->request_fn(q);
+ queue_flag_clear(QUEUE_FLAG_REENTER, q);
+ } else {
+ queue_flag_set(QUEUE_FLAG_PLUGGED, q);
+ kblockd_schedule_work(q, &q->unplug_work);
+ }
}
EXPORT_SYMBOL(__blk_run_queue);
*
* Description:
* Invoke request handling on this queue, if it has pending work to do.
- * May be used to restart queueing when a request has completed. Also
- * See @blk_start_queueing.
- *
+ * May be used to restart queueing when a request has completed.
*/
void blk_run_queue(struct request_queue *q)
{
}
EXPORT_SYMBOL(blk_get_request);
-/**
- * blk_start_queueing - initiate dispatch of requests to device
- * @q: request queue to kick into gear
- *
- * This is basically a helper to remove the need to know whether a queue
- * is plugged or not if someone just wants to initiate dispatch of requests
- * for this queue. Should be used to start queueing on a device outside
- * of ->request_fn() context. Also see @blk_run_queue.
- *
- * The queue lock must be held with interrupts disabled.
- */
-void blk_start_queueing(struct request_queue *q)
-{
- if (!blk_queue_plugged(q)) {
- if (unlikely(blk_queue_stopped(q)))
- return;
- q->request_fn(q);
- } else
- __generic_unplug_device(q);
-}
-EXPORT_SYMBOL(blk_start_queueing);
-
/**
* blk_requeue_request - put a request back on queue
* @q: request queue where request should be inserted
* barrier
*/
rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd_flags |= REQ_SOFTBARRIER;
rq->special = data;
drive_stat_acct(rq, 1);
__elv_add_request(q, rq, where, 0);
- blk_start_queueing(q);
+ __blk_run_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_insert_request);
if (bio_failfast_driver(bio))
req->cmd_flags |= REQ_FAILFAST_DRIVER;
- /*
- * REQ_BARRIER implies no merging, but lets make it explicit
- */
if (unlikely(bio_discard(bio))) {
req->cmd_flags |= REQ_DISCARD;
if (bio_barrier(bio))
req->cmd_flags |= REQ_SOFTBARRIER;
req->q->prepare_discard_fn(req->q, req);
} else if (unlikely(bio_barrier(bio)))
- req->cmd_flags |= (REQ_HARDBARRIER | REQ_NOMERGE);
+ req->cmd_flags |= REQ_HARDBARRIER;
if (bio_sync(bio))
req->cmd_flags |= REQ_RW_SYNC;
}
}
+/**
+ * blk_rq_bytes - Returns bytes left to complete in the entire request
+ * @rq: the request being processed
+ **/
+unsigned int blk_rq_bytes(struct request *rq)
+{
+ if (blk_fs_request(rq))
+ return rq->hard_nr_sectors << 9;
+
+ return rq->data_len;
+}
+EXPORT_SYMBOL_GPL(blk_rq_bytes);
+
+/**
+ * blk_rq_cur_bytes - Returns bytes left to complete in the current segment
+ * @rq: the request being processed
+ **/
+unsigned int blk_rq_cur_bytes(struct request *rq)
+{
+ if (blk_fs_request(rq))
+ return rq->current_nr_sectors << 9;
+
+ if (rq->bio)
+ return rq->bio->bi_size;
+
+ return rq->data_len;
+}
+EXPORT_SYMBOL_GPL(blk_rq_cur_bytes);
+
/**
* __end_that_request_first - end I/O on a request
* @req: the request being processed
trace_block_rq_complete(req->q, req);
/*
- * for a REQ_TYPE_BLOCK_PC request, we want to carry any eventual
- * sense key with us all the way through
+ * For fs requests, rq is just carrier of independent bio's
+ * and each partial completion should be handled separately.
+ * Reset per-request error on each partial completion.
+ *
+ * TODO: tj: This is too subtle. It would be better to let
+ * low level drivers do what they see fit.
*/
- if (!blk_pc_request(req))
+ if (blk_fs_request(req))
req->errors = 0;
if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
return 1;
}
+static int end_that_request_data(struct request *rq, int error,
+ unsigned int nr_bytes, unsigned int bidi_bytes)
+{
+ if (rq->bio) {
+ if (__end_that_request_first(rq, error, nr_bytes))
+ return 1;
+
+ /* Bidi request must be completed as a whole */
+ if (blk_bidi_rq(rq) &&
+ __end_that_request_first(rq->next_rq, error, bidi_bytes))
+ return 1;
+ }
+
+ return 0;
+}
+
/*
* queue lock must be held
*/
}
}
-/**
- * blk_rq_bytes - Returns bytes left to complete in the entire request
- * @rq: the request being processed
- **/
-unsigned int blk_rq_bytes(struct request *rq)
-{
- if (blk_fs_request(rq))
- return rq->hard_nr_sectors << 9;
-
- return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_bytes);
-
-/**
- * blk_rq_cur_bytes - Returns bytes left to complete in the current segment
- * @rq: the request being processed
- **/
-unsigned int blk_rq_cur_bytes(struct request *rq)
-{
- if (blk_fs_request(rq))
- return rq->current_nr_sectors << 9;
-
- if (rq->bio)
- return rq->bio->bi_size;
-
- return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_cur_bytes);
-
-/**
- * end_request - end I/O on the current segment of the request
- * @req: the request being processed
- * @uptodate: error value or %0/%1 uptodate flag
- *
- * Description:
- * Ends I/O on the current segment of a request. If that is the only
- * remaining segment, the request is also completed and freed.
- *
- * This is a remnant of how older block drivers handled I/O completions.
- * Modern drivers typically end I/O on the full request in one go, unless
- * they have a residual value to account for. For that case this function
- * isn't really useful, unless the residual just happens to be the
- * full current segment. In other words, don't use this function in new
- * code. Use blk_end_request() or __blk_end_request() to end a request.
- **/
-void end_request(struct request *req, int uptodate)
-{
- int error = 0;
-
- if (uptodate <= 0)
- error = uptodate ? uptodate : -EIO;
-
- __blk_end_request(req, error, req->hard_cur_sectors << 9);
-}
-EXPORT_SYMBOL(end_request);
-
-static int end_that_request_data(struct request *rq, int error,
- unsigned int nr_bytes, unsigned int bidi_bytes)
-{
- if (rq->bio) {
- if (__end_that_request_first(rq, error, nr_bytes))
- return 1;
-
- /* Bidi request must be completed as a whole */
- if (blk_bidi_rq(rq) &&
- __end_that_request_first(rq->next_rq, error, bidi_bytes))
- return 1;
- }
-
- return 0;
-}
-
/**
* blk_end_io - Generic end_io function to complete a request.
* @rq: the request being processed
}
EXPORT_SYMBOL_GPL(blk_end_bidi_request);
+/**
+ * end_request - end I/O on the current segment of the request
+ * @req: the request being processed
+ * @uptodate: error value or %0/%1 uptodate flag
+ *
+ * Description:
+ * Ends I/O on the current segment of a request. If that is the only
+ * remaining segment, the request is also completed and freed.
+ *
+ * This is a remnant of how older block drivers handled I/O completions.
+ * Modern drivers typically end I/O on the full request in one go, unless
+ * they have a residual value to account for. For that case this function
+ * isn't really useful, unless the residual just happens to be the
+ * full current segment. In other words, don't use this function in new
+ * code. Use blk_end_request() or __blk_end_request() to end a request.
+ **/
+void end_request(struct request *req, int uptodate)
+{
+ int error = 0;
+
+ if (uptodate <= 0)
+ error = uptodate ? uptodate : -EIO;
+
+ __blk_end_request(req, error, req->hard_cur_sectors << 9);
+}
+EXPORT_SYMBOL(end_request);
+
/**
* blk_update_request - Special helper function for request stacking drivers
* @rq: the request being processed
projects / ~andy / linux / blobdiff