Merge branch 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...

[~andy/linux] / arch / x86 / ia32 / ia32entry.S

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 72f853aea4780f9285aa10ff9fa4c3abd98e3a84..1106261856c8022610bface1d874c38f24b9bf63 100644 (file)
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -132,7 +132,7 @@ ENTRY(ia32_sysenter_target)
        CFI_REL_OFFSET rsp,0
        pushfq_cfi
        /*CFI_REL_OFFSET rflags,0*/
-       movl    8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
+       movl    TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d
        CFI_REGISTER rip,r10
        pushq_cfi $__USER32_CS
        /*CFI_REL_OFFSET cs,0*/
@@ -148,9 +148,8 @@ ENTRY(ia32_sysenter_target)
        .section __ex_table,"a"
        .quad 1b,ia32_badarg
        .previous       
-       GET_THREAD_INFO(%r10)
-       orl    $TS_COMPAT,TI_status(%r10)
-       testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+       orl     $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+       testl   $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        CFI_REMEMBER_STATE
        jnz  sysenter_tracesys
        cmpq    $(IA32_NR_syscalls-1),%rax
@@ -160,13 +159,12 @@ sysenter_do_call:
 sysenter_dispatch:
        call    *ia32_sys_call_table(,%rax,8)
        movq    %rax,RAX-ARGOFFSET(%rsp)
-       GET_THREAD_INFO(%r10)
        DISABLE_INTERRUPTS(CLBR_NONE)
        TRACE_IRQS_OFF
-       testl   $_TIF_ALLWORK_MASK,TI_flags(%r10)
+       testl   $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jnz     sysexit_audit
 sysexit_from_sys_call:
-       andl    $~TS_COMPAT,TI_status(%r10)
+       andl    $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        /* clear IF, that popfq doesn't enable interrupts early */
        andl  $~0x200,EFLAGS-R11(%rsp) 
        movl    RIP-R11(%rsp),%edx              /* User %eip */
@@ -203,7 +201,7 @@ sysexit_from_sys_call:
        .endm
 
        .macro auditsys_exit exit
-       testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+       testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jnz ia32_ret_from_sys_call
        TRACE_IRQS_ON
        sti
@@ -213,12 +211,11 @@ sysexit_from_sys_call:
        movzbl %al,%edi         /* zero-extend that into %edi */
        inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
        call audit_syscall_exit
-       GET_THREAD_INFO(%r10)
        movl RAX-ARGOFFSET(%rsp),%eax   /* reload syscall return value */
        movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
        cli
        TRACE_IRQS_OFF
-       testl %edi,TI_flags(%r10)
+       testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jz \exit
        CLEAR_RREGS -ARGOFFSET
        jmp int_with_check
@@ -236,7 +233,7 @@ sysexit_audit:
 
 sysenter_tracesys:
 #ifdef CONFIG_AUDITSYSCALL
-       testl   $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+       testl   $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jz      sysenter_auditsys
 #endif
        SAVE_REST
@@ -307,9 +304,8 @@ ENTRY(ia32_cstar_target)
        .section __ex_table,"a"
        .quad 1b,ia32_badarg
        .previous       
-       GET_THREAD_INFO(%r10)
-       orl   $TS_COMPAT,TI_status(%r10)
-       testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+       orl     $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+       testl   $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        CFI_REMEMBER_STATE
        jnz   cstar_tracesys
        cmpq $IA32_NR_syscalls-1,%rax
@@ -319,13 +315,12 @@ cstar_do_call:
 cstar_dispatch:
        call *ia32_sys_call_table(,%rax,8)
        movq %rax,RAX-ARGOFFSET(%rsp)
-       GET_THREAD_INFO(%r10)
        DISABLE_INTERRUPTS(CLBR_NONE)
        TRACE_IRQS_OFF
-       testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
+       testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jnz sysretl_audit
 sysretl_from_sys_call:
-       andl $~TS_COMPAT,TI_status(%r10)
+       andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        RESTORE_ARGS 0,-ARG_SKIP,0,0,0
        movl RIP-ARGOFFSET(%rsp),%ecx
        CFI_REGISTER rip,rcx
@@ -353,7 +348,7 @@ sysretl_audit:
 
 cstar_tracesys:
 #ifdef CONFIG_AUDITSYSCALL
-       testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+       testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jz cstar_auditsys
 #endif
        xchgl %r9d,%ebp
@@ -418,9 +413,8 @@ ENTRY(ia32_syscall)
        /* note the registers are not zero extended to the sf.
           this could be a problem. */
        SAVE_ARGS 0,1,0
-       GET_THREAD_INFO(%r10)
-       orl   $TS_COMPAT,TI_status(%r10)
-       testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+       orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+       testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
        jnz ia32_tracesys
        cmpq $(IA32_NR_syscalls-1),%rax
        ja ia32_badsys
@@ -454,8 +448,8 @@ ia32_badsys:
        CFI_ENDPROC
        
        .macro PTREGSCALL label, func, arg
-       .globl \label
-\label:
+       ALIGN
+GLOBAL(\label)
        leaq \func(%rip),%rax
        leaq -ARGOFFSET+8(%rsp),\arg    /* 8 for return address */
        jmp  ia32_ptregs_common 
@@ -472,7 +466,8 @@ ia32_badsys:
        PTREGSCALL stub32_vfork, sys_vfork, %rdi
        PTREGSCALL stub32_iopl, sys_iopl, %rsi
 
-ENTRY(ia32_ptregs_common)
+       ALIGN
+ia32_ptregs_common:
        popq %r11
        CFI_ENDPROC
        CFI_STARTPROC32 simple