powerpc/85xx: Update SRIO device tree nodes

[~andy/linux] / arch / powerpc / boot / dts / mpc8641_hpcn.dts

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 848320e4d3c4060049e6d78b1449aa24a62b8606..fb8640e0c5b8ca4ea37b61ae3f79e5e4f8bfbe5e 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,13 +26,6 @@
                serial1 = &serial1;
                pci0 = &pci0;
                pci1 = &pci1;
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map.  The most likely case is that we have PCI, so comment out the
- * rapidio node.  Leave it here for reference.
- */
-               /* rapidio0 = &rapidio0; */
        };
 
        cpus {
@@ -361,6 +354,41 @@
                        device_type = "open-pic";
                };
 
+               rmu: rmu@d3000 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,srio-rmu";
+                       reg = <0xd3000 0x500>;
+                       ranges = <0x0 0xd3000 0x500>;
+
+                       message-unit@0 {
+                               compatible = "fsl,srio-msg-unit";
+                               reg = <0x0 0x100>;
+                               interrupts = <
+                                       53 2 /* msg1_tx_irq */
+                                       54 2>;/* msg1_rx_irq */
+                       };
+                       message-unit@100 {
+                               compatible = "fsl,srio-msg-unit";
+                               reg = <0x100 0x100>;
+                               interrupts = <
+                                       55 2  /* msg2_tx_irq */
+                                       56 2>;/* msg2_rx_irq */
+                       };
+                       doorbell-unit@400 {
+                               compatible = "fsl,srio-dbell-unit";
+                               reg = <0x400 0x80>;
+                               interrupts = <
+                                       49 2  /* bell_outb_irq */
+                                       50 2>;/* bell_inb_irq */
+                       };
+                       port-write-unit@4e0 {
+                               compatible = "fsl,srio-port-write-unit";
+                               reg = <0x4e0 0x20>;
+                               interrupts = <48 2>;
+                       };
+               };
+
                global-utilities@e0000 {
                        compatible = "fsl,mpc8641-guts";
                        reg = <0xe0000 0x1000>;
@@ -612,16 +640,27 @@
                };
        };
 /*
-       rapidio0: rapidio@ffec0000 {
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map.  The most likely case is that we have PCI, so comment out the
+ * rapidio node.  Leave it here for reference.
+
+       rapidio@ffec0000 {
+               reg = <0xffec0000 0x11000>;
+               compatible = "fsl,srio";
+               interrupt-parent = <&mpic>;
+               interrupts = <48 2>;
                #address-cells = <2>;
                #size-cells = <2>;
-               compatible = "fsl,rapidio-delta";
-               reg = <0xffec0000 0x20000>;
-               ranges = <0 0 0x80000000 0 0x20000000>;
-               interrupt-parent = <&mpic>;
-               // err_irq bell_outb_irq bell_inb_irq
-               //      msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
-               interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+               fsl,srio-rmu-handle = <&rmu>;
+               ranges;
+
+               port1 {
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       cell-index = <1>;
+                       ranges = <0 0 0x80000000 0 0x20000000>;
+               };
        };
 */