[MIPS] Sibyte: Fix ZBbus profiler

[~andy/linux] / arch / mips / sibyte / sb1250 / setup.c

diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index fde4751c84fe6335108eb4eda4fab5566f6d1834..87188f0f6fbe1e4f7d61683c8cdc9bec1b5afb19 100644 (file)
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-#include <linux/config.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 #include <linux/string.h>
@@ -33,6 +33,7 @@ unsigned int soc_pass;
 unsigned int soc_type;
 unsigned int periph_rev;
 unsigned int zbbus_mhz;
+EXPORT_SYMBOL(zbbus_mhz);
 
 static char *soc_str;
 static char *pass_str;
@@ -68,7 +69,7 @@ static int __init sys_rev_decode(void)
                ret = setup_bcm112x();
                break;
        default:
-               prom_printf("Unknown SOC type %x\n", soc_type);
+               printk("Unknown SOC type %x\n", soc_type);
                ret = 1;
                break;
        }
@@ -113,7 +114,7 @@ static int __init setup_bcm1250(void)
                        pass_str = "A0-A6";
                        war_pass = K_SYS_REVISION_BCM1250_PASS2;
                } else {
-                       prom_printf("Unknown BCM1250 rev %x\n", soc_pass);
+                       printk("Unknown BCM1250 rev %x\n", soc_pass);
                        ret = 1;
                }
                break;
@@ -141,7 +142,7 @@ static int __init setup_bcm112x(void)
                pass_str = "A2";
                break;
        default:
-               prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+               printk("Unknown %s rev %x\n", soc_str, soc_pass);
                ret = 1;
        }
        return ret;
@@ -159,21 +160,21 @@ void __init sb1250_setup(void)
        soc_pass = G_SYS_REVISION(sys_rev);
 
        if (sys_rev_decode()) {
-               prom_printf("Restart after failure to identify SiByte chip\n");
+               printk("Restart after failure to identify SiByte chip\n");
                machine_restart(NULL);
        }
 
        plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
        zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
 
-       prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
+       printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
                    soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
-       prom_printf("Board type: %s\n", get_system_type());
+       printk("Board type: %s\n", get_system_type());
 
        switch (war_pass) {
        case K_SYS_REVISION_BCM1250_PASS1:
 #ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
-               prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
+               printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
                            "and the kernel doesn't have the proper "
                            "workarounds compiled in. @@@@\n");
                bad_config = 1;
@@ -183,27 +184,27 @@ void __init sb1250_setup(void)
                /* Pass 2 - easiest as default for now - so many numbers */
 #if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
     !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
-               prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the "
+               printk("@@@@ This is a BCM1250 A3-A10 board, and the "
                            "kernel doesn't have the proper workarounds "
                            "compiled in. @@@@\n");
                bad_config = 1;
 #endif
 #ifdef CONFIG_CPU_HAS_PREFETCH
-               prom_printf("@@@@ Prefetches may be enabled in this kernel, "
+               printk("@@@@ Prefetches may be enabled in this kernel, "
                            "but are buggy on this board.  @@@@\n");
                bad_config = 1;
 #endif
                break;
        case K_SYS_REVISION_BCM1250_PASS2_2:
 #ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
-               prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the "
+               printk("@@@@ This is a BCM1250 B1/B2. board, and the "
                            "kernel doesn't have the proper workarounds "
                            "compiled in. @@@@\n");
                bad_config = 1;
 #endif
 #if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
     !defined(CONFIG_CPU_HAS_PREFETCH)
-               prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is "
+               printk("@@@@ This is a BCM1250 B1/B2, but the kernel is "
                            "conservatively configured for an 'A' stepping. "
                            "@@@@\n");
 #endif
@@ -212,7 +213,7 @@ void __init sb1250_setup(void)
                break;
        }
        if (bad_config) {
-               prom_printf("Invalid configuration for this chip.\n");
+               printk("Invalid configuration for this chip.\n");
                machine_restart(NULL);
        }
 }