default y
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
+ select RTC_LIB
mainmenu "Linux/MIPS Kernel Configuration"
config BASLER_EXCITE
bool "Basler eXcite smart camera"
+ select CEVT_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
note that a kernel built with this option selected will not be
able to run on normal units.
+config BCM47XX
+ bool "BCM47XX based boards"
+ select CEVT_R4K
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SSB
+ select SSB_DRIVER_MIPS
+ select GENERIC_GPIO
+ select SYS_HAS_EARLY_PRINTK
+ select CFE
+ help
+ Support for BCM47XX based boards
+
config MIPS_COBALT
bool "Cobalt Server"
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select I8253
select I8259
select IRQ_CPU
+ select IRQ_GT641XX
select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
config MACH_DECSTATION
bool "DECstations"
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select NO_IOPORT
select IRQ_CPU
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
+ select CEVT_R4K
select GENERIC_ISA_DMA
+ select IRQ_CPU
+ select I8253
select I8259
select ISA
select PCSPEAKER
config LASAT
bool "LASAT Networks platforms"
+ select CEVT_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
+ select IRQ_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
select R5000_CPU_SCACHE
config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
select ARCH_SPARSEMEM_ENABLE
+ select CEVT_R4K
select SYS_HAS_CPU_LOONGSON2
select DMA_NONCOHERENT
select BOOT_ELF32
config MIPS_ATLAS
bool "MIPS Atlas board"
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select IRQ_CPU
select HW_HAS_PCI
+ select I8253
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
config MIPS_SEAD
bool "MIPS SEAD board"
+ select CEVT_R4K
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
+ select CEVT_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MACH_VR41XX
bool "NEC VR4100 series based machines"
+ select CEVT_R4K
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
+ select CEVT_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config QEMU
bool "Qemu"
+ select CEVT_R4K
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
+ select I8253
select I8259
+ select IRQ_CPU
select ISA
select PCSPEAKER
select SWAP_IO_SPACE
select ARC
select ARC32
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_EISA
+ select I8253
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
select NR_CPUS_DEFAULT_64
- select PCI_DOMAINS
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select ARC
select ARC32
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select IRQ_CPU
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
select SYS_HAS_CPU_R5000
select BOOT_ELF32
select DMA_COHERENT
select NR_CPUS_DEFAULT_4
- select PCI_DOMAINS
select SIBYTE_BCM1x80
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select HW_HAS_EISA
select HW_HAS_PCI
select IRQ_CPU
+ select I8253
select I8259
select ISA
select PCSPEAKER
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
+ select CEVT_R4K
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
+ select CEVT_R4K
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config WR_PPMC
bool "Wind River PPMC board"
+ select CEVT_R4K
select IRQ_CPU
select BOOT_ELF32
select DMA_NONCOHERENT
bool
default y
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
config GENERIC_TIME
bool
default y
+config GENERIC_CMOS_UPDATE
+ bool
+ default y
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
config BOOT_RAW
bool
+config CEVT_R4K
+ bool
+
+config CFE
+ bool
+
config DMA_COHERENT
bool
config IRQ_TXX9
bool
+config IRQ_GT641XX
+ bool
+
config MIPS_BOARDS_GEN
bool
menu "CPU selection"
+source "kernel/time/Kconfig"
+
choice
prompt "CPU type"
default CPU_R4X00
depends on CPU_MIPS32_R2
#depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
+ select GENERIC_CLOCKEVENTS_BROADCAST
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CPU_MIPSR2_SRS
depends on !CPU_R3000
default y
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+
#
# Use the generic interrupt handling code in kernel/irq/:
#
config PCI
bool "Support for PCI controller"
depends on HW_HAS_PCI
+ select PCI_DOMAINS
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
config PCI_DOMAINS
bool
- depends on PCI
source "drivers/pci/Kconfig"
bool
default y
+config I8253
+ bool
+
config PCSPEAKER
bool
projects / ~andy / linux / blobdiff