select MIPS_RM9122
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
help
If you have one of the following DECstation Models you definitely
want to choose R4xx0 for the CPU Type:
- DECstation 5000/50
- DECstation 5000/150
- DECstation 5000/260
- DECsystem 5900/260
+ DECstation 5000/50
+ DECstation 5000/150
+ DECstation 5000/260
+ DECsystem 5900/260
otherwise choose R3000.
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
select CPU_HAS_WB
help
Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
board.
config MIPS_SEAD
- bool "MIPS SEAD board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "MIPS SEAD board"
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
This option enables support for MIPS Technologies MIPSsim software
emulator.
-config MOMENCO_OCELOT
- bool "Momentum Ocelot board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select PCI_GT64XXX_PCI0
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config DDB5477
- bool "NEC DDB Vrc-5477"
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select I8259
- select IRQ_CPU
- select SYS_HAS_CPU_R5432
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_KGDB
- select SYS_SUPPORTS_KGDB
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the R5432-based NEC DDB Vrc-5477,
- or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, etc.
-
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
select DMA_NONCOHERENT
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
+ select IRQ_TXX9
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX39XX
select SYS_SUPPORTS_32BIT_KERNEL
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select I8259
+ select IRQ_CPU
+ select IRQ_TXX9
+ select I8259 if TOSHIBA_FPCIB0
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
- select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
- select GENERIC_ISA_DMA
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select I8259
+ select IRQ_CPU
+ select IRQ_TXX9
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
endchoice
source "arch/mips/au1000/Kconfig"
-source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/tx4927/Kconfig"
source "arch/mips/tx4938/Kconfig"
source "arch/mips/vr41xx/Kconfig"
-source "arch/mips/philips/pnx8550/common/Kconfig"
endmenu
config SYS_HAS_EARLY_PRINTK
bool
-config GENERIC_ISA_DMA
+config HOTPLUG_CPU
bool
- select ZONE_DMA
+ default n
config I8259
bool
config NO_IOPORT
def_bool n
+config GENERIC_ISA_DMA
+ bool
+ select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
+
config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
- select ZONE_DMA
+ select GENERIC_ISA_DMA
config GENERIC_GPIO
bool
config IRQ_MSP_CIC
bool
-config DDB5XXX_COMMON
+config IRQ_TXX9
bool
- select SYS_SUPPORTS_KGDB
config MIPS_BOARDS_GEN
bool
config SERIAL_RM9000
bool
-#
-# Unfortunately not all GT64120 systems run the chip at the same clock.
-# As the user for the clock rate and try to minimize the available options.
-#
-choice
- prompt "Galileo Chip Clock"
- depends on MOMENCO_OCELOT
- default SYSCLK_100 if MOMENCO_OCELOT
-
-config SYSCLK_100
- bool "100" if MOMENCO_OCELOT
-
-endchoice
-
config ARC32
bool
default y
config 64BIT_PHYS_ADDR
- bool "Support for 64-bit physical address space"
- depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+ bool
config CPU_HAS_LLSC
bool