#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.4"
+#define VERSION "version 1.60.0"
#include "powernow-k8.h"
/* serialize freq changes */
*/
static u32 convert_fid_to_vco_fid(u32 fid)
{
- if (fid < HI_FID_TABLE_BOTTOM) {
+ if (fid < HI_FID_TABLE_BOTTOM)
return 8 + (2 * fid);
- } else {
+ else
return fid;
- }
}
/*
if (i++ > 100) {
printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
return 1;
- }
+ }
} while (query_current_values_with_pending_wait(data));
count_off_irt(data);
do {
wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
- if (i++ > 100) {
- printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
- return 1;
- }
+ if (i++ > 100) {
+ printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+ return 1;
+ }
} while (query_current_values_with_pending_wait(data));
if (savefid != data->currfid) {
/* Phase 2 - core frequency transition */
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
{
- u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+ u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
: vcoreqfid - vcocurrfid;
while (vcofiddiff > 2) {
+ (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
+
if (reqfid > data->currfid) {
if (data->currfid > LO_FID_TABLE_TOP) {
- if (write_new_fid(data, data->currfid + 2)) {
+ if (write_new_fid(data, data->currfid + fid_interval)) {
return 1;
}
} else {
}
}
} else {
- if (write_new_fid(data, data->currfid - 2))
+ if (write_new_fid(data, data->currfid - fid_interval))
return 1;
}
oldmask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
- schedule();
if (smp_processor_id() != cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
goto out;
}
goto out;
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+ if ((eax & CPUID_XFAM) != CPUID_XFAM_K8)
+ goto out;
+
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
- ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
- ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
+ ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
goto out;
}
out:
set_cpus_allowed(current, oldmask);
- schedule();
return rc;
-
}
static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
return -ENODEV;
}
- if ((pst[j].fid > MAX_FID)
- || (pst[j].fid & 1)
- || (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
+ if (pst[j].fid > MAX_FID) {
+ printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
+ return -ENODEV;
+ }
+ if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
/* Only first fid is allowed to be in "low" range */
- printk(KERN_ERR PFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+ printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
return -EINVAL;
}
if (pst[j].fid < lastfid)
lastfid = pst[j].fid;
}
if (lastfid & 1) {
- printk(KERN_ERR PFX "lastfid invalid\n");
+ printk(KERN_ERR BFX "lastfid invalid\n");
return -EINVAL;
}
if (lastfid > LO_FID_TABLE_TOP)
- printk(KERN_INFO PFX "first fid not from lo freq table\n");
+ printk(KERN_INFO BFX "first fid not from lo freq table\n");
return 0;
}
dprintk("table vers: 0x%x\n", psb->tableversion);
if (psb->tableversion != PSB_VERSION_1_4) {
- printk(KERN_INFO BFX "PSB table is not v1.4\n");
+ printk(KERN_ERR BFX "PSB table is not v1.4\n");
return -ENODEV;
}
* BIOS and Kernel Developer's Guide, which is available on
* www.amd.com
*/
- printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
+ printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n");
return -ENODEV;
}
/* verify only 1 entry from the lo frequency table */
if (fid < HI_FID_TABLE_BOTTOM) {
if (cntlofreq) {
- /* if both entries are the same, ignore this
- * one...
- */
+ /* if both entries are the same, ignore this one ... */
if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
(powernow_table[i].index != powernow_table[cntlofreq].index)) {
printk(KERN_ERR PFX "Too many lo freq table entries\n");
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
/* fid are the lower 8 bits of the index we stored into
- * the cpufreq frequency table in find_psb_table, vid are
+ * the cpufreq frequency table in find_psb_table, vid are
* the upper 8 bits.
*/
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
- schedule();
if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
goto err_out;
}
err_out:
set_cpus_allowed(current, oldmask);
- schedule();
-
return ret;
}
}
/* per CPU init entry point to the driver */
-static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
+static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
cpumask_t oldmask = CPU_MASK_ALL;
int rc, i;
+ if (!cpu_online(pol->cpu))
+ return -ENODEV;
+
if (!check_supported_cpu(pol->cpu))
return -ENODEV;
- data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
+ data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
if (!data) {
printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
return -ENOMEM;
}
- memset(data,0,sizeof(struct powernow_k8_data));
data->cpu = pol->cpu;
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
- schedule();
if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
goto err_out;
}
/* run on any CPU again */
set_cpus_allowed(current, oldmask);
- schedule();
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
pol->cpus = cpu_core_map[pol->cpu];
- /* Take a crude guess here.
+ /* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
+ (3 * (1 << data->irt) * 10)) * 1000;
err_out:
set_cpus_allowed(current, oldmask);
- schedule();
powernow_k8_cpu_exit_acpi(data);
kfree(data);
set_cpus_allowed(current, oldmask);
return 0;
}
- preempt_disable();
-
+
if (query_current_values_with_pending_wait(data))
goto out;
khz = find_khz_freq_from_fid(data->currfid);
- out:
- preempt_enable_no_resched();
+out:
set_cpus_allowed(current, oldmask);
-
return khz;
}
};
/* driver entry point for init */
-static int __init powernowk8_init(void)
+static int __cpuinit powernowk8_init(void)
{
unsigned int i, supported_cpus = 0;
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
late_initcall(powernowk8_init);
module_exit(powernowk8_exit);
-
projects / ~andy / linux / blobdiff