select GENERIC_IRQ_PROBE
select IRQ_PER_CPU if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
+ select GENERIC_SMP_IDLE_THREAD
config GENERIC_CSUM
def_bool y
help
BF561 Processor Support.
+config BF609
+ bool "BF609"
+ select CLKDEV_LOOKUP
+ help
+ BF609 Processor Support.
+
endchoice
config SMP
config BF_REV_MIN
int
- default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
+ default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
default 2 if (BF537 || BF536 || BF534)
default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
default 4 if (BF538 || BF539)
config BF_REV_MAX
int
- default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+ default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
default 3 if (BF537 || BF536 || BF534 || BF54xM)
default 5 if (BF561 || BF538 || BF539)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
- default BF_REV_0_0 if (BF51x || BF52x)
+ default BF_REV_0_0 if (BF51x || BF52x || BF60x)
default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
config BF_REV_0_0
bool "0.0"
- depends on (BF51x || BF52x || (BF54x && !BF54xM))
+ depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
config BF_REV_0_1
bool "0.1"
source "arch/blackfin/mach-bf537/Kconfig"
source "arch/blackfin/mach-bf538/Kconfig"
source "arch/blackfin/mach-bf548/Kconfig"
+source "arch/blackfin/mach-bf609/Kconfig"
menu "Board customizations"
memory region is used to capture NULL pointer references as well
as some core kernel functions.
+config PHY_RAM_BASE_ADDRESS
+ hex "Physical RAM Base"
+ default 0x0
+ help
+ set BF609 FPGA physical SRAM base address
+
config ROM_BASE
hex "Kernel ROM Base"
depends on ROMKERNEL
config PLL_BYPASS
bool "Bypass PLL"
- depends on BFIN_KERNEL_CLOCK
+ depends on BFIN_KERNEL_CLOCK && (!BF60x)
default n
config CLKIN_HALF
default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
- default "20" if BFIN561_EZKIT
+ default "20" if (BFIN561_EZKIT || BF609)
default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
default "25" if BFIN527_AD7160EVAL
help
int "System Clock Divider"
depends on BFIN_KERNEL_CLOCK
range 1 15
- default 5
+ default 4
help
- This sets the frequency of the system clock (including SDRAM or DDR).
+ This sets the frequency of the system clock (including SDRAM or DDR) on
+ !BF60x else it set the clock for system buses and provides the
+ source from which SCLK0 and SCLK1 are derived.
This can be between 1 and 15
System Clock = (PLL frequency) / (this setting)
+config SCLK0_DIV
+ int "System Clock0 Divider"
+ depends on BFIN_KERNEL_CLOCK && BF60x
+ range 1 15
+ default 1
+ help
+ This sets the frequency of the system clock0 for PVP and all other
+ peripherals not clocked by SCLK1.
+ This can be between 1 and 15
+ System Clock0 = (System Clock) / (this setting)
+
+config SCLK1_DIV
+ int "System Clock1 Divider"
+ depends on BFIN_KERNEL_CLOCK && BF60x
+ range 1 15
+ default 1
+ help
+ This sets the frequency of the system clock1 (including SPORT, SPI and ACM).
+ This can be between 1 and 15
+ System Clock1 = (System Clock) / (this setting)
+
+config DCLK_DIV
+ int "DDR Clock Divider"
+ depends on BFIN_KERNEL_CLOCK && BF60x
+ range 1 15
+ default 2
+ help
+ This sets the frequency of the DDR memory.
+ This can be between 1 and 15
+ DDR Clock = (PLL frequency) / (this setting)
+
choice
prompt "DDR SDRAM Chip Type"
depends on BFIN_KERNEL_CLOCK
choice
prompt "DDR/SDRAM Timing"
- depends on BFIN_KERNEL_CLOCK
+ depends on BFIN_KERNEL_CLOCK && !BF60x
default BFIN_KERNEL_CLOCK_MEMINIT_CALC
help
This option allows you to specify Blackfin SDRAM/DDR Timing parameters
default 600000000 if BF548
default 533333333 if BF549
default 600000000 if BF561
+ default 800000000 if BF609
config MIN_VCO_HZ
int
config MAX_SCLK_HZ
int
+ default 200000000 if BF609
default 133333333
config MIN_SCLK_HZ
config BFIN_L2_DCACHEABLE
bool "Enable DCACHE for L2 SRAM"
depends on BFIN_DCACHE
- depends on (BF54x || BF561) && !SMP
+ depends on (BF54x || BF561 || BF60x) && !SMP
default n
choice
prompt "L2 SRAM DCACHE policy"
comment "Asynchronous Memory Configuration"
menu "EBIU_AMGCTL Global Control"
+ depends on !BF60x
config C_AMCKEN
bool "Enable CLKOUT"
default y
endmenu
menu "EBIU_AMBCTL Control"
+ depends on !BF60x
config BANK_0
hex "Bank 0 (AMBCTL0.L)"
default 0x7BB0
choice
prompt "Standby Power Saving Mode"
- depends on PM
+ depends on PM && !BF60x
default PM_BFIN_SLEEP_DEEPER
config PM_BFIN_SLEEP_DEEPER
bool "Sleep Deeper"
On ADSP-BF549 this option enables the same functionality on the
/MRXON pin also PH7.
+config PM_BFIN_WAKE_PA15
+ bool "Allow Wake-Up from PA15"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PA15 Wake-Up
+
+config PM_BFIN_WAKE_PA15_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PA15
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PB15
+ bool "Allow Wake-Up from PB15"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PB15 Wake-Up
+
+config PM_BFIN_WAKE_PB15_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PB15
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PC15
+ bool "Allow Wake-Up from PC15"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PC15 Wake-Up
+
+config PM_BFIN_WAKE_PC15_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PC15
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PD06
+ bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PD06(ETH0_PHYINT) Wake-up
+
+config PM_BFIN_WAKE_PD06_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PD06
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PE12
+ bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
+
+config PM_BFIN_WAKE_PE12_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PE12
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG04
+ bool "Allow Wake-Up from PG04(CAN0_RX)"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PG04(CAN0_RX) Wake-up
+
+config PM_BFIN_WAKE_PG04_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PG04
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG13
+ bool "Allow Wake-Up from PG13"
+ depends on PM && BF60x
+ default n
+ help
+ Enable PG13 Wake-Up
+
+config PM_BFIN_WAKE_PG13_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_PG13
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_USB
+ bool "Allow Wake-Up from (USB)"
+ depends on PM && BF60x
+ default n
+ help
+ Enable (USB) Wake-up
+
+config PM_BFIN_WAKE_USB_POL
+ int "Wake-up priority"
+ depends on PM_BFIN_WAKE_USB
+ default 0
+ help
+ Wake-Up priority 0(low) 1(high)
+
endmenu
menu "CPU Frequency scaling"
projects / ~andy / linux / blobdiff