#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
/*
return !((1 << 7) & __raw_readw(priv->cr2));
}
-static void usbhs_phy_reset(struct platform_device *pdev)
+static int usbhs_phy_reset(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
/* init phy */
__raw_writew(0x8a0a, priv->cr2);
+
+ return 0;
}
static int usbhs_get_id(struct platform_device *pdev)
return 0;
}
-static void usbhs_hardware_exit(struct platform_device *pdev)
+static int usbhs_hardware_exit(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
free_irq(IRQ15, pdev);
+
+ return 0;
}
static u32 usbhs_pipe_cfg[] = {
.resource = sh_mmcif_resources,
};
-/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
-static struct regulator_consumer_supply fixed2v8_power_consumers[] =
+/* Fixed 3.3V regulators to be used by SDHI0 */
+static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vcc_sdhi0_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers),
+ .consumer_supplies = vcc_sdhi0_consumers,
+};
+
+static struct fixed_voltage_config vcc_sdhi0_info = {
+ .supply_name = "SDHI0 Vcc",
+ .microvolts = 3300000,
+ .gpio = 15,
+ .enable_high = 1,
+ .init_data = &vcc_sdhi0_init_data,
+};
+
+static struct platform_device vcc_sdhi0 = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &vcc_sdhi0_info,
+ },
+};
+
+/* Fixed 3.3V regulators to be used by SDHI2 */
+static struct regulator_consumer_supply vcc_sdhi2_consumers[] =
+{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
+
+static struct regulator_init_data vcc_sdhi2_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi2_consumers),
+ .consumer_supplies = vcc_sdhi2_consumers,
+};
+
+static struct fixed_voltage_config vcc_sdhi2_info = {
+ .supply_name = "SDHI2 Vcc",
+ .microvolts = 3300000,
+ .gpio = 14,
+ .enable_high = 1,
+ .init_data = &vcc_sdhi2_init_data,
+};
+
+static struct platform_device vcc_sdhi2 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &vcc_sdhi2_info,
+ },
};
/* SDHI */
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED,
- .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_POWER_OFF_CARD,
};
static struct resource sdhi0_resources[] = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_USE_GPIO_CD |
TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED,
- .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = GPIO_PORT13,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD,
+ .cd_gpio = 13,
};
static struct resource sdhi2_resources[] = {
&usbhs_device,
&lcdc_device,
&mmc_device,
+ &vcc_sdhi0,
+ &vcc_sdhi2,
&sdhi0_device,
&sdhi2_device,
&gpio_keys_device,
&fsi_ak4648_device,
};
+static unsigned long pin_pullup_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
+static const struct pinctrl_map kzm_pinctrl_map[] = {
+ /* FSIA (AK4648) */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+ "fsia_mclk_in", "fsia"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+ "fsia_sclk_in", "fsia"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+ "fsia_data_in", "fsia"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+ "fsia_data_out", "fsia"),
+ /* I2C3 */
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
+ "i2c3_1", "i2c3"),
+ /* LCD */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
+ "lcd_data24", "lcd"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
+ "lcd_sync", "lcd"),
+ /* MMCIF */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+ "mmc0_data8_0", "mmc0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+ "mmc0_ctrl_0", "mmc0"),
+ PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+ "PORT279", pin_pullup_conf),
+ PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
+ "mmc0_data8_0", pin_pullup_conf),
+ /* SCIFA4 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+ "scifa4_data", "scifa4"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+ "scifa4_ctrl", "scifa4"),
+ /* SDHI0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+ "sdhi0_data4", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+ "sdhi0_ctrl", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+ "sdhi0_cd", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
+ "sdhi0_wp", "sdhi0"),
+ /* SDHI2 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
+ "sdhi2_data4", "sdhi2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
+ "sdhi2_ctrl", "sdhi2"),
+ /* SMSC */
+ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
+ "bsc_cs4", "bsc"),
+ /* USB */
+ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0",
+ "usb_vbus", "usb"),
+};
+
/*
* FIXME
*
static void __init kzm_init(void)
{
- regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,
ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
- regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
- ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
- regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- sh73a0_pinmux_init();
-
- /* enable SCIFA4 */
- gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
- gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
- gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
- gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+ pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
- /* CS4 for SMSC/USB */
- gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
+ sh73a0_pinmux_init();
/* SMSC */
- gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
+ gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
/* LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
-
- gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
- gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
+ gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
+ gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
/* Touchscreen */
- gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
-
- /* enable MMCIF */
- gpio_request(GPIO_FN_MMCCLK0, NULL);
- gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
+ gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
/* enable SD */
- gpio_request(GPIO_FN_SDHIWP0, NULL);
- gpio_request(GPIO_FN_SDHICD0, NULL);
- gpio_request(GPIO_FN_SDHICMD0, NULL);
- gpio_request(GPIO_FN_SDHICLK0, NULL);
- gpio_request(GPIO_FN_SDHID0_3, NULL);
- gpio_request(GPIO_FN_SDHID0_2, NULL);
- gpio_request(GPIO_FN_SDHID0_1, NULL);
- gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
- gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
- /* enable Micro SD */
- gpio_request(GPIO_FN_SDHID2_0, NULL);
- gpio_request(GPIO_FN_SDHID2_1, NULL);
- gpio_request(GPIO_FN_SDHID2_2, NULL);
- gpio_request(GPIO_FN_SDHID2_3, NULL);
- gpio_request(GPIO_FN_SDHICMD2, NULL);
- gpio_request(GPIO_FN_SDHICLK2, NULL);
- gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
- /* I2C 3 */
- gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
- gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
-
- /* enable FSI2 port A (ak4648) */
- gpio_request(GPIO_FN_FSIACK, NULL);
- gpio_request(GPIO_FN_FSIAILR, NULL);
- gpio_request(GPIO_FN_FSIAIBT, NULL);
- gpio_request(GPIO_FN_FSIAISLD, NULL);
- gpio_request(GPIO_FN_FSIAOSLD, NULL);
-
- /* enable USB */
- gpio_request(GPIO_FN_VBUS_0, NULL);
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
projects / ~andy / linux / blobdiff