ARM: OMAP2+: Remove legacy booting support for n8x0

[~andy/linux] / arch / arm / mach-omap2 / msdi.c

diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index c52d8b4a3e9152e84a95749e9e088f2532d10124..828e0db3d943ce2fc2800c18d7ceaf5a3a87cdc4 100644 (file)
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -88,72 +88,3 @@ int omap_msdi_reset(struct omap_hwmod *oh)
 
        return 0;
 }
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
-                                   *mmc_controller)
-{
-       if ((mmc_controller->slots[0].switch_pin > 0) && \
-               (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-               omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-                                       OMAP_PIN_INPUT_PULLUP);
-       if ((mmc_controller->slots[0].gpio_wp > 0) && \
-               (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-               omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-                                       OMAP_PIN_INPUT_PULLUP);
-
-       omap_mux_init_signal("sdmmc_cmd", 0);
-       omap_mux_init_signal("sdmmc_clki", 0);
-       omap_mux_init_signal("sdmmc_clko", 0);
-       omap_mux_init_signal("sdmmc_dat0", 0);
-       omap_mux_init_signal("sdmmc_dat_dir0", 0);
-       omap_mux_init_signal("sdmmc_cmd_dir", 0);
-       if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
-               omap_mux_init_signal("sdmmc_dat1", 0);
-               omap_mux_init_signal("sdmmc_dat2", 0);
-               omap_mux_init_signal("sdmmc_dat3", 0);
-               omap_mux_init_signal("sdmmc_dat_dir1", 0);
-               omap_mux_init_signal("sdmmc_dat_dir2", 0);
-               omap_mux_init_signal("sdmmc_dat_dir3", 0);
-       }
-
-       /*
-        * Use internal loop-back in MMC/SDIO Module Input Clock
-        * selection
-        */
-       if (mmc_controller->slots[0].internal_clock) {
-               u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-               v |= (1 << 24);
-               omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-       }
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-       struct platform_device *pdev;
-       struct omap_hwmod *oh;
-       int id = 0;
-       char *oh_name = "msdi1";
-       char *dev_name = "mmci-omap";
-
-       if (!mmc_data[0]) {
-               pr_err("%s fails: Incomplete platform data\n", __func__);
-               return;
-       }
-
-       omap242x_mmc_mux(mmc_data[0]);
-
-       oh = omap_hwmod_lookup(oh_name);
-       if (!oh) {
-               pr_err("Could not look up %s\n", oh_name);
-               return;
-       }
-       pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
-                                sizeof(struct omap_mmc_platform_data));
-       if (IS_ERR(pdev))
-               WARN(1, "Can'd build omap_device for %s:%s.\n",
-                                       dev_name, oh->name);
-}
-
-#endif