#include <video/platform_lcd.h>
#include <media/m5mols.h>
+#include <media/s5k6aa.h>
#include <media/s5p_fimc.h>
#include <media/v4l2-mediabus.h>
FIXED_REG_ID_MAX8903,
FIXED_REG_ID_CAM_A28V,
FIXED_REG_ID_CAM_12V,
+ FIXED_REG_ID_CAM_VT_15V,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE | MMC_CAP_ERASE),
+ MMC_CAP_ERASE),
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct regulator_consumer_supply emmc_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "dw_mmc"),
};
static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE,
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
.ext_cd_gpio_invert = 1,
.cd_type = S3C_SDHCI_CD_GPIO,
};
/* TSP */
-static u8 mxt_init_vals[] = {
- /* MXT_GEN_COMMAND(6) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_GEN_POWER(7) */
- 0x20, 0xff, 0x32,
- /* MXT_GEN_ACQUIRE(8) */
- 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
- /* MXT_TOUCH_MULTI(9) */
- 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
- 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00,
- /* MXT_TOUCH_KEYARRAY(15) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
- 0x00,
- /* MXT_SPT_GPIOPWM(19) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_PROCI_GRIPFACE(20) */
- 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
- 0x0f, 0x0a,
- /* MXT_PROCG_NOISE(22) */
- 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
- 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
- /* MXT_TOUCH_PROXIMITY(23) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_PROCI_ONETOUCH(24) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_SPT_SELFTEST(25) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00,
- /* MXT_PROCI_TWOTOUCH(27) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_SPT_CTECONFIG(28) */
- 0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
-};
-
static struct mxt_platform_data mxt_platform_data = {
- .config = mxt_init_vals,
- .config_length = ARRAY_SIZE(mxt_init_vals),
-
.x_line = 18,
.y_line = 11,
.x_size = 1024,
static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
};
+static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
+ REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
+};
static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
};
REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
};
static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
+ REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
};
static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
- REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+ REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
.enabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
+ .consumer_supplies = nuri_max8997_ldo6_consumer,
};
static struct regulator_init_data __initdata max8997_ldo7_data = {
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
- .name = "VUSB/VDAC_3.3V_C210",
+ .name = "VUSB+VDAC_3.3V_C210",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.constraints = {
.name = "VINT_1.1V_C210",
.min_uV = 900000,
- .max_uV = 1100000,
+ .max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.state_mem = {
.regulators = nuri_max8997_regulators,
.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
- .buck2_gpiodvs = true,
.buck1_voltage[0] = 1350000, /* 1.35V */
.buck1_voltage[1] = 1300000, /* 1.3V */
}
/* CAMERA */
+static struct regulator_consumer_supply cam_vt_cam15_supply =
+ REGULATOR_SUPPLY("vdd_core", "6-003c");
+
+static struct regulator_init_data cam_vt_cam15_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_vt_cam15_supply,
+};
+
+static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
+ .supply_name = "VT_CAM_1.5V",
+ .microvolts = 1500000,
+ .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
+ .enable_high = 1,
+ .init_data = &cam_vt_cam15_reg_init_data,
+};
+
+static struct platform_device cam_vt_cam15_fixed_rdev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
+ .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
+};
+
static struct regulator_consumer_supply cam_vdda_supply[] = {
+ REGULATOR_SUPPLY("vdda", "6-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
+#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0)
+#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1)
+
+static struct s5k6aa_platform_data s5k6aa_pldata = {
+ .mclk_frequency = 24000000UL,
+ .gpio_reset = { GPIO_CAM_VT_NRST, 0 },
+ .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 },
+ .bus_type = V4L2_MBUS_PARALLEL,
+ .horiz_flip = 1,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+ I2C_BOARD_INFO("S5K6AA", 0x3c),
+ .platform_data = &s5k6aa_pldata,
+};
static struct m5mols_platform_data m5mols_platdata = {
.gpio_reset = GPIO_CAM_MEGA_RST,
static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
{
+ .flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &s5k6aa_board_info,
+ .clk_frequency = 24000000UL,
+ .i2c_bus_num = 6,
+ }, {
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_MIPI_CSI2,
};
static struct gpio nuri_camera_gpios[] = {
+ { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
+ { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
};
-static void nuri_camera_init(void)
+static void __init nuri_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
&s5p_device_mipi_csis0);
pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
/* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_VT_NRST);
+ gpio_free(GPIO_CAM_VT_NSTBY);
gpio_free(GPIO_CAM_MEGA_RST);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
}
+static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
+ .frequency = 400000U,
+ .sda_delay = 200,
+ .bus_num = 6,
+};
+
static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
.frequency = 400000U,
.sda_delay = 200,
};
+/* DEVFREQ controlling memory/bus */
+static struct platform_device exynos4_bus_devfreq = {
+ .name = "exynos4210-busfreq",
+};
+
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
&s3c_device_i2c5, /* PMIC should initialize first */
&s3c_device_i2c0,
+ &s3c_device_i2c6,
&emmc_fixed_voltage,
&s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s3c_device_i2c3,
&i2c9_gpio,
&s3c_device_adc,
+ &s5p_device_g2d,
+ &s5p_device_jpeg,
&s3c_device_rtc,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_CAM],
&s5p_device_fimc_md,
/* NURI Devices */
&nuri_backlight_device,
&max8903_fixed_reg_dev,
&nuri_max8903_device,
+ &cam_vt_cam15_fixed_rdev,
&cam_vdda_fixed_rdev,
&cam_8m_12v_fixed_rdev,
+ &exynos4_bus_devfreq,
};
static void __init nuri_map_io(void)
{
+ clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+ s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
s5p_fimd0_set_platdata(&nuri_fb_pdata);
nuri_camera_init();
nuri_ehci_init();
- clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
- s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
- s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(NURI, "NURI")
projects / ~andy / linux / blobdiff