Merge tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git...

[~andy/linux] / arch / arm / Kconfig.debug

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1d41908d5cda0644a31a9048c882369f21db235b..ab95f07e154131adb2faf54e5b72f8d1b8495c9a 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -251,6 +251,27 @@ choice
                  Say Y here if you want kernel low-level debugging support
                  on i.MX6Q/DL.
 
+       config DEBUG_IMX6SL_UART
+               bool "i.MX6SL Debug UART"
+               depends on SOC_IMX6SL
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on i.MX6SL.
+
+       config DEBUG_KEYSTONE_UART0
+               bool "Kernel low-level debugging on KEYSTONE2 using UART0"
+               depends on ARCH_KEYSTONE
+               help
+                 Say Y here if you want the debug print routines to direct
+                 their output to UART0 serial port on KEYSTONE2 devices.
+
+       config DEBUG_KEYSTONE_UART1
+               bool "Kernel low-level debugging on KEYSTONE2 using UART1"
+               depends on ARCH_KEYSTONE
+               help
+                 Say Y here if you want the debug print routines to direct
+                 their output to UART1 serial port on KEYSTONE2 devices.
+
        config DEBUG_MMP_UART2
                bool "Kernel low-level debugging message via MMP UART2"
                depends on ARCH_MMP
@@ -303,12 +324,37 @@ choice
                  their output to the serial port on MSM 8960 devices.
 
        config DEBUG_MVEBU_UART
-               bool "Kernel low-level debugging messages via MVEBU UART"
+               bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
                depends on ARCH_MVEBU
                help
                  Say Y here if you want kernel low-level debugging support
                  on MVEBU based platforms.
 
+                 This option should be used with the old bootloaders
+                 that left the internal registers mapped at
+                 0xd0000000. As of today, this is the case on
+                 platforms such as the Globalscale Mirabox or the
+                 Plathome OpenBlocks AX3, when using the original
+                 bootloader.
+
+                 If the wrong DEBUG_MVEBU_UART* option is selected,
+                 when u-boot hands over to the kernel, the system
+                 silently crashes, with no serial output at all.
+
+       config DEBUG_MVEBU_UART_ALTERNATE
+               bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
+               depends on ARCH_MVEBU
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on MVEBU based platforms.
+
+                 This option should be used with the new bootloaders
+                 that remap the internal registers at 0xf1000000.
+
+                 If the wrong DEBUG_MVEBU_UART* option is selected,
+                 when u-boot hands over to the kernel, the system
+                 silently crashes, with no serial output at all.
+
        config DEBUG_NOMADIK_UART
                bool "Kernel low-level debugging messages via NOMADIK UART"
                depends on ARCH_NOMADIK
@@ -353,6 +399,13 @@ choice
                  their output to the standard serial port on the RealView
                  PB1176 platform.
 
+       config DEBUG_ROCKCHIP_UART
+               bool "Kernel low-level debugging messages via Rockchip UART"
+               depends on ARCH_ROCKCHIP
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on Rockchip based platforms.
+
        config DEBUG_S3C_UART0
                depends on PLAT_SAMSUNG
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
@@ -443,6 +496,13 @@ choice
                  Say Y here if you want the debug print routines to direct
                  their output to the uart1 port on SiRFmarco devices.
 
+       config DEBUG_U300_UART
+               bool "Kernel low-level debugging messages via U300 UART0"
+               depends on ARCH_U300
+               help
+                 Say Y here if you want the debug print routines to direct
+                 their output to the uart port on U300 devices.
+
        config DEBUG_UX500_UART
                depends on ARCH_U8500
                bool "Use Ux500 UART for low-level debug"
@@ -532,7 +592,8 @@ config DEBUG_IMX_UART_PORT
                                                DEBUG_IMX35_UART || \
                                                DEBUG_IMX51_UART || \
                                                DEBUG_IMX53_UART || \
-                                               DEBUG_IMX6Q_UART
+                                               DEBUG_IMX6Q_UART || \
+                                               DEBUG_IMX6SL_UART
        default 1
        depends on ARCH_MXC
        help
@@ -587,6 +648,32 @@ choice
                bool "Zoom2/3 UART"
 endchoice
 
+choice
+       prompt "Low-level debug console UART"
+       depends on DEBUG_ROCKCHIP_UART
+
+       config DEBUG_RK29_UART0
+               bool "RK29 UART0"
+
+       config DEBUG_RK29_UART1
+               bool "RK29 UART1"
+
+       config DEBUG_RK29_UART2
+               bool "RK29 UART2"
+
+       config DEBUG_RK3X_UART0
+               bool "RK3X UART0"
+
+       config DEBUG_RK3X_UART1
+               bool "RK3X UART1"
+
+       config DEBUG_RK3X_UART2
+               bool "RK3X UART2"
+
+       config DEBUG_RK3X_UART3
+               bool "RK3X UART3"
+endchoice
+
 choice
        prompt "Low-level debug console UART"
        depends on DEBUG_LL && DEBUG_TEGRA_UART
@@ -631,18 +718,24 @@ config DEBUG_LL_INCLUDE
                                 DEBUG_IMX35_UART || \
                                 DEBUG_IMX51_UART || \
                                 DEBUG_IMX53_UART ||\
-                                DEBUG_IMX6Q_UART
-       default "debug/mvebu.S" if DEBUG_MVEBU_UART
+                                DEBUG_IMX6Q_UART || \
+                                DEBUG_IMX6SL_UART
+       default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \
+                                     DEBUG_KEYSTONE_UART1
+       default "debug/mvebu.S" if DEBUG_MVEBU_UART || \
+                                  DEBUG_MVEBU_UART_ALTERNATE
        default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
        default "debug/nomadik.S" if DEBUG_NOMADIK_UART
        default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
        default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
        default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
                                 DEBUG_MMP_UART3
+       default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART
        default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
        default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
        default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
        default "debug/tegra.S" if DEBUG_TEGRA_UART
+       default "debug/u300.S" if DEBUG_U300_UART
        default "debug/ux500.S" if DEBUG_UX500_UART
        default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
                DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1