#define ARC_REG_PERIBASE_BCR 0x69
#define ARC_REG_FP_BCR 0x6B /* Single-Precision FPU */
#define ARC_REG_DPFP_BCR 0x6C /* Dbl Precision FPU */
-#define ARC_REG_MMU_BCR 0x6f
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_ICCM_BCR 0x78
#define ARC_REG_D_UNCACH_BCR 0x6A
/* status32 Bits Positions */
-#define STATUS_H_BIT 0 /* CPU Halted */
-#define STATUS_E1_BIT 1 /* Int 1 enable */
-#define STATUS_E2_BIT 2 /* Int 2 enable */
-#define STATUS_A1_BIT 3 /* Int 1 active */
-#define STATUS_A2_BIT 4 /* Int 2 active */
#define STATUS_AE_BIT 5 /* Exception active */
#define STATUS_DE_BIT 6 /* PC is in delay slot */
#define STATUS_U_BIT 7 /* User/Kernel mode */
#define STATUS_L_BIT 12 /* Loop inhibit */
/* These masks correspond to the status word(STATUS_32) bits */
-#define STATUS_H_MASK (1<<STATUS_H_BIT)
-#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
-#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
-#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
-#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
#define STATUS_AE_MASK (1<<STATUS_AE_BIT)
#define STATUS_DE_MASK (1<<STATUS_DE_BIT)
#define STATUS_U_MASK (1<<STATUS_U_BIT)
/* Auxiliary registers */
#define AUX_IDENTITY 4
#define AUX_INTR_VEC_BASE 0x25
-#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */
-#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
-#define AUX_IRQ_LV12 0x43 /* interrupt level register */
-
-#define AUX_IENABLE 0x40c
-#define AUX_ITRIGGER 0x40d
-#define AUX_IPULSE 0x415
-
-/* Timer related Aux registers */
-#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
-#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
-#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
-#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
-#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
-#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
-
-#define TIMER_CTRL_IE (1 << 0) /* Interupt when Count reachs limit */
-#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
-
-/* MMU Management regs */
-#define ARC_REG_TLBPD0 0x405
-#define ARC_REG_TLBPD1 0x406
-#define ARC_REG_TLBINDEX 0x407
-#define ARC_REG_TLBCOMMAND 0x408
-#define ARC_REG_PID 0x409
-#define ARC_REG_SCRATCH_DATA0 0x418
-
-/* Bits in MMU PID register */
-#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
-
-/* Error code if probe fails */
-#define TLB_LKUP_ERR 0x80000000
-
-/* TLB Commands */
-#define TLBWrite 0x1
-#define TLBRead 0x2
-#define TLBGetIndex 0x3
-#define TLBProbe 0x4
-
-#if (CONFIG_ARC_MMU_VER >= 2)
-#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */
-#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */
-#else
-#undef TLBWriteNI /* These cmds don't exist on older MMU */
-#undef TLBIVUTLB
-#endif
-
-/* Instruction cache related Auxiliary registers */
-#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
-#define ARC_REG_IC_IVIC 0x10
-#define ARC_REG_IC_CTRL 0x11
-#define ARC_REG_IC_IVIL 0x19
-#if (CONFIG_ARC_MMU_VER > 2)
-#define ARC_REG_IC_PTAG 0x1E
-#endif
-
-/* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE 0x1
-
-/* Data cache related Auxiliary registers */
-#define ARC_REG_DC_BCR 0x72
-#define ARC_REG_DC_IVDC 0x47
-#define ARC_REG_DC_CTRL 0x48
-#define ARC_REG_DC_IVDL 0x4A
-#define ARC_REG_DC_FLSH 0x4B
-#define ARC_REG_DC_FLDL 0x4C
-#if (CONFIG_ARC_MMU_VER > 2)
-#define ARC_REG_DC_PTAG 0x5C
-#endif
-/* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH 0x40
-#define DC_CTRL_FLUSH_STATUS 0x100
-
-/* MMU Management regs */
-#define ARC_REG_PID 0x409
-#define ARC_REG_SCRATCH_DATA0 0x418
-
-/* Bits in MMU PID register */
-#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/*
* Floating Pt Registers
#endif
};
-struct bcr_mmu_1_2 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
-#else
- unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
-#endif
-};
-
-struct bcr_mmu_3 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
- u_itlb:4, u_dtlb:4;
-#else
- unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
- ways:4, ver:8;
-#endif
-};
-
#define EXTN_SWAP_VALID 0x1
#define EXTN_NORM_VALID 0x2
#define EXTN_MINMAX_VALID 0x2
#endif
};
-struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
- unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
-};
-
struct bcr_perip {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int start:8, pad2:8, sz:8, pad:8;
projects / ~andy / linux / blobdiff