removed from a 7.0.0 or newer release.)
* The monitor and interface options may be removed from a future fetchmail
version as they are not reasonably portable across operating systems.
-* IMAP2 and IMAP4 (not IMAP4r1) are obsolete, support may be removed from a
+* IMAP4 (not IMAP4r1) is obsolete, support may be removed from a
future fetchmail version.
* --sslcertck will become a default setting in a future fetchmail version.
* The multidrop To/Cc guessing code along with the fragile duplicate suppressor
* The "protocol auto" default inside fetchmail may be removed from a future
fetchmail release. Explicit configuration of the protocol is recommended.
* Kerberos 5 support may be removed from a future fetchmail release.
-* The --principal option may be removed from a future fetchmail release.
* SIGHUP wakeup support may be removed from a future fetchmail release and
cause fetchmail to terminate - it was broken for many years.
* The maintainer may migrate fetchmail to C++ with STL or C#, and impose further
requirements (dependencies), such as Boost or other class libraries.
-* The softbounce option default will change to "false" in the next release.
* The --bsmtp - mode of operation may be removed in a future release.
* Given that OpenSSL is severely underdocumented, and needs license exceptions,
fetchmail may switch to a different SSL library.
we're down to O(n log n).
Contributed by Rainer Weikusat, MAD Partners Ltd./MSS GmbH.
* The POP3 code now always uses UIDL, except if "fetchall" is in effect.
- Fixes BerliOS Bug #16172.
+ Fixes BerliOS Bug #16172. Fixes Debian Bug#345788.
+* Fetchmail now enables SSL support by default. If this is undesired,
+ ./configure --without-ssl should help.
+* The OpenSSL code now excludes the SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS option.
+ This can cause interoperability problems with certain buggy servers, but is
+ required to defang chosen-plaintext attacks against AES. While probably hard
+ to mount against fetchmail, let's play it safe rather than be sorry later.
# FEATURES ADDED
* Fetchmail can now retrieve credentials from PWMD. This needs to be enabled at
option will also mark the message with errors as seen.
The default policy is to abort the session whenever a server error occurs.
Contributed by Craig Brown.
+* Fetchmailconf offers cram-md5 and apop authentication.
# REMOVED FEATURES
* IMAP2 protocol support was removed.
never supported IPv6 (including IPv6-mapped IPv4) either.
Non-DNS based alias keywords such as "aka" remain.
* Kerberos IV support was removed.
+* fetchmail no longer supports SSL v2, nor the corresponding SSL2 option to
+ --sslproto. SSLv2 is insecure and had been deprecated 15 years ago. fetchmail
+ will actively forbid SSLv2 negotiation by means of SSL_OP_NO_SSLv2.
+ To fix Debian Bug#622054.
+* A lot of outdated and/or unsafe-to-use material got dropped from contrib/.
+
+# REGRESSION FIXES
+* The mimedecode feature now properly detects multipart/mixed-type matches, so
+ that quoted-printable-encoded multipart messages can get decoded.
+ (Regression in 5.0.0 on 1999-03-27, as a side effect of a PGP-mimedecode fix
+ attributed to Henrik Storner.)
+
+# BUG FIXES
+* The mimedecode feature failed to ship the last line of the body if it was
+ encoded as quoted-printable and had a MIME soft line break in the very last
+ line. Reported by Lars Hecking in June 2011.
+ Bug introduced on 1998-03-20 when the mimedecode support was added by ESR
+ before release 4.4.1 through code contributed by Henrik Storner.
+ Workaround for older releases: do not use mimedecode feature.
+* Fetchmail now detects singly-quoted % expansions in the mda option and refuses
+ to deliver for safety reasons. Fixes Debian Bug#347909.
+* The Server certificate: message in verbose mode now appears on stdout like the
+ remainder of the output. Reported by Henry Jensen, to fix Debian Bug #639807.
# CHANGES
* A foreground fetchmail can now accept a few more options while another copy is
running in the background.
+* APOP is no longer a protocol, but an authentication method. In order to use
+ it, use protocol POP3 auth APOP, or on the commandline, -p pop3 --auth apop.
+ If no authentication method is specified, APOP is automatically tried if
+ offered by the server before we resort to sending the password as clear text.
--------------------------------------------------------------------------------
+fetchmail-6.3.22 (not yet released):
+* Some servers, notably Microsoft Exchange, return "A0009 OK FETCH completed."
+ without any header in response to a header request for meeting reminder
+ messages (with a "meeting.ics" attachment). fetchmail now treats these as
+ transient errors. Report by John Connett, Patch by Sunil Shetye.
+
+
+fetchmail-6.3.21 (not yet released):
+
+# CRITICAL BUG FIX
+* The IMAP client no longer inserts NUL bytes into the last line of a message
+ when it is not closed with a LF or CRLF sequence. Reported by Antoine Levitt.
+ As a side effect of the fix, and in order to avoid a full rewrite, fetchmail
+ will now CRLF-terminate the last line fetched through IMAP, even if it is
+ originally not terminated by LF or CRLF. This bears no relevance if your
+ messages end up in mbox, but adds line termination for storages (like Maildir)
+ that do not require that the last line be LF- or CRLF-terminated.
-fetchmail-6.3.20 (not yet released):
+
+fetchmail-6.3.20 (released 2011-06-06, 26005 LoC):
+
+# SECURITY BUG FIXES
+* CVE-2011-1947:
+ STARTTLS: Fetchmail runs the IMAP STARTTLS or POP3 STLS negotiation with the
+ set timeout (default five minutes) now. This was reported missing, with
+ observed fetchmail freezes beyond a week, by Thomas Jarosch.
+ SSL-wrapped connections were unaffected by this timeout, so users of older
+ versions can force ssl-wrapped connections -- if supported by the server --
+ with the --ssl command line or ssl rcfile option.
+ See fetchmail-SA-2011-01.txt for further details.
+
+# BUG FIXES
+* IMAP: Do not search for UNSEEN messages in ranges. Usually, there are very few
+ new messages and most of the range searches result in nothing. Instead, split
+ the long response to make the IMAP driver think that there are multiple lines
+ of response. (Sunil Shetye)
+* Do not print "skipping message" for old messages even in verbose mode. If
+ there are too many old messages, the logs just get filled without any real
+ activity. (Sunil Shetye) (suggested by Yunfan Jiang)
+* Build: fetchmail now always uses its own MD5 implementation rather than trying
+ to find a system library with matched header. The library and header variants
+ found on systems are too diverse, and the code size saving is not worth any
+ more wasted user or programmer time.
# CHANGES
-* fetchmail now always uses its own MD5 implementation. The library and header
- variants are too diverse, and we've been bitten before -- and configure
- complains noisily on Cyrus-SASL's RFC1321 md5.h.
+* Call strlen() only once when removing CRLF from a line. (Sunil Shetye)
+* fetchmail sets Internet domain sockets to "keepalive" mode now. Note that
+ there is no portable way to configure actual timeouts for this mode, and some
+ systems only support a system-wide timeout setting. fetchmail does not
+ attempt to tune the time spans of keepalive mode.
# TRANSLATION UPDATES
+ [cs] Chech (Petr Pisar)
+ [nl] Dutch (Erwin Poeze)
+ [fr] French (Frédéric Marchal)
+ [de] German (Matthias Andree)
[ja] Japanese (Takeshi Hamasaki)
+ [pl] Polish (Jakub Bogusz)
+ [sk] Slovak (Marcel Telka)
+
+# KNOWN BUGS AND WORKAROUNDS
+ (this section floats upwards through the NEWS file so it stays with the
+ current release information - however, it was stuck with 6.3.8 for a while)
+* fetchmail does not handle messages without Message-ID header well
+ (See sourceforge.net bug #780933)
+* BSMTP is mostly untested and errors can cause corrupt output.
+* Sun Workshop 6 (SPARC) is known to miscompile the configuration file lexer in
+ 64-bit mode. Either compile 32-bit code or use GCC to compile 64-bit
+ fetchmail. Note that fetchmail doesn't take advantage of 64-bit code,
+ so compiling 32-bit SPARC code should not cause any difficulties.
+* fetchmail does not track pending deletes over crashes.
+* the command line interface is sometimes a bit stubborn, for instance,
+ fetchmail -s doesn't work with a daemon running.
+* Linux systems may return duplicates of an IP address in some circumstances if
+ no or no global IPv6 addresses are configured.
+ (No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
+* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
+ messages. This will not be fixed, because the maintainer has no Kerberos 5
+ server to test against. Use GSSAPI.
fetchmail-6.3.19 (released 2010-12-10, 25945 LoC):
[it] Italian (Vincenzo Campanella)
[pl] Polish (Jakub Bogusz)
-# KNOWN BUGS AND WORKAROUNDS
- (this section floats upwards through the NEWS file so it stays with the
- current release information - however, it was stuck with 6.3.8 for a while)
-* fetchmail does not handle messages without Message-ID header well
- (See sourceforge.net bug #780933)
-* BSMTP is mostly untested and errors can cause corrupt output.
-* Sun Workshop 6 (SPARC) is known to miscompile the configuration file lexer in
- 64-bit mode. Either compile 32-bit code or use GCC to compile 64-bit
- fetchmail. Note that fetchmail doesn't take advantage of 64-bit code,
- so compiling 32-bit SPARC code should not cause any difficulties.
-* fetchmail does not track pending deletes over crashes.
-* the command line interface is sometimes a bit stubborn, for instance,
- fetchmail -s doesn't work with a daemon running.
-* Linux systems may return duplicates of an IP address in some circumstances if
- no or no global IPv6 addresses are configured.
- (No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
-* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
- messages. This will not be fixed, because the maintainer has no Kerberos 5
- server to test against. Use GSSAPI.
-
fetchmail-6.3.18 (released 2010-10-09, 25936 LoC):
projects / ~andy / fetchmail / blobdiff