Format: <io>,<irq>,<mode>
See header of drivers/net/hamradio/baycom_ser_hdx.c.
+ blkdevparts= Manual partition parsing of block device(s) for
+ embedded devices based on command line input.
+ See Documentation/block/cmdline-partition.txt
+
boot_delay= Milliseconds to delay each printk during boot.
Values larger than 10 seconds (10000) are changed to
no delay (0).
pages. In the event, a node is too small to have both
kernelcore and Movable pages, kernelcore pages will
take priority and other nodes will have a larger number
- of kernelcore pages. The Movable zone is used for the
+ of Movable pages. The Movable zone is used for the
allocation of pages that may be reclaimed or moved
by the page migration subsystem. This means that
HugeTLB pages may not be allocated from this zone.
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/blockdev/ramdisk.txt.
- rcu_nocbs= [KNL,BOOT]
+ rcu_nocbs= [KNL]
In kernels built with CONFIG_RCU_NOCB_CPU=y, set
the specified list of CPUs to be no-callback CPUs.
Invocation of these CPUs' RCU callbacks will
real-time workloads. It can also improve energy
efficiency for asymmetric multiprocessors.
- rcu_nocb_poll [KNL,BOOT]
+ rcu_nocb_poll [KNL]
Rather than requiring that offloaded CPUs
(specified by rcu_nocbs= above) explicitly
awaken the corresponding "rcuoN" kthreads,
energy efficiency by requiring that the kthreads
periodically wake up to do the polling.
- rcutree.blimit= [KNL,BOOT]
+ rcutree.blimit= [KNL]
Set maximum number of finished RCU callbacks to process
in one batch.
- rcutree.fanout_leaf= [KNL,BOOT]
+ rcutree.rcu_fanout_leaf= [KNL]
Increase the number of CPUs assigned to each
leaf rcu_node structure. Useful for very large
systems.
- rcutree.jiffies_till_first_fqs= [KNL,BOOT]
+ rcutree.jiffies_till_first_fqs= [KNL]
Set delay from grace-period initialization to
first attempt to force quiescent states.
Units are jiffies, minimum value is zero,
and maximum value is HZ.
- rcutree.jiffies_till_next_fqs= [KNL,BOOT]
+ rcutree.jiffies_till_next_fqs= [KNL]
Set delay between subsequent attempts to force
quiescent states. Units are jiffies, minimum
value is one, and maximum value is HZ.
- rcutree.qhimark= [KNL,BOOT]
+ rcutree.qhimark= [KNL]
Set threshold of queued
RCU callbacks over which batch limiting is disabled.
- rcutree.qlowmark= [KNL,BOOT]
+ rcutree.qlowmark= [KNL]
Set threshold of queued RCU callbacks below which
batch limiting is re-enabled.
- rcutree.rcu_cpu_stall_suppress= [KNL,BOOT]
- Suppress RCU CPU stall warning messages.
-
- rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
- Set timeout for RCU CPU stall warning messages.
-
- rcutree.rcu_idle_gp_delay= [KNL,BOOT]
+ rcutree.rcu_idle_gp_delay= [KNL]
Set wakeup interval for idle CPUs that have
RCU callbacks (RCU_FAST_NO_HZ=y).
- rcutree.rcu_idle_lazy_gp_delay= [KNL,BOOT]
+ rcutree.rcu_idle_lazy_gp_delay= [KNL]
Set wakeup interval for idle CPUs that have
only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y).
Lazy RCU callbacks are those which RCU can
prove do nothing more than free memory.
- rcutorture.fqs_duration= [KNL,BOOT]
+ rcutorture.fqs_duration= [KNL]
Set duration of force_quiescent_state bursts.
- rcutorture.fqs_holdoff= [KNL,BOOT]
+ rcutorture.fqs_holdoff= [KNL]
Set holdoff time within force_quiescent_state bursts.
- rcutorture.fqs_stutter= [KNL,BOOT]
+ rcutorture.fqs_stutter= [KNL]
Set wait time between force_quiescent_state bursts.
- rcutorture.irqreader= [KNL,BOOT]
- Test RCU readers from irq handlers.
+ rcutorture.gp_exp= [KNL]
+ Use expedited update-side primitives.
+
+ rcutorture.gp_normal= [KNL]
+ Use normal (non-expedited) update-side primitives.
+ If both gp_exp and gp_normal are set, do both.
+ If neither gp_exp nor gp_normal are set, still
+ do both.
- rcutorture.n_barrier_cbs= [KNL,BOOT]
+ rcutorture.n_barrier_cbs= [KNL]
Set callbacks/threads for rcu_barrier() testing.
- rcutorture.nfakewriters= [KNL,BOOT]
+ rcutorture.nfakewriters= [KNL]
Set number of concurrent RCU writers. These just
stress RCU, they don't participate in the actual
test, hence the "fake".
- rcutorture.nreaders= [KNL,BOOT]
+ rcutorture.nreaders= [KNL]
Set number of RCU readers.
- rcutorture.onoff_holdoff= [KNL,BOOT]
+ rcutorture.object_debug= [KNL]
+ Enable debug-object double-call_rcu() testing.
+
+ rcutorture.onoff_holdoff= [KNL]
Set time (s) after boot for CPU-hotplug testing.
- rcutorture.onoff_interval= [KNL,BOOT]
+ rcutorture.onoff_interval= [KNL]
Set time (s) between CPU-hotplug operations, or
zero to disable CPU-hotplug testing.
- rcutorture.shuffle_interval= [KNL,BOOT]
+ rcutorture.rcutorture_runnable= [BOOT]
+ Start rcutorture running at boot time.
+
+ rcutorture.shuffle_interval= [KNL]
Set task-shuffle interval (s). Shuffling tasks
allows some CPUs to go into dyntick-idle mode
during the rcutorture test.
- rcutorture.shutdown_secs= [KNL,BOOT]
+ rcutorture.shutdown_secs= [KNL]
Set time (s) after boot system shutdown. This
is useful for hands-off automated testing.
- rcutorture.stall_cpu= [KNL,BOOT]
+ rcutorture.stall_cpu= [KNL]
Duration of CPU stall (s) to test RCU CPU stall
warnings, zero to disable.
- rcutorture.stall_cpu_holdoff= [KNL,BOOT]
+ rcutorture.stall_cpu_holdoff= [KNL]
Time to wait (s) after boot before inducing stall.
- rcutorture.stat_interval= [KNL,BOOT]
+ rcutorture.stat_interval= [KNL]
Time (s) between statistics printk()s.
- rcutorture.stutter= [KNL,BOOT]
+ rcutorture.stutter= [KNL]
Time (s) to stutter testing, for example, specifying
five seconds causes the test to run for five seconds,
wait for five seconds, and so on. This tests RCU's
ability to transition abruptly to and from idle.
- rcutorture.test_boost= [KNL,BOOT]
+ rcutorture.test_boost= [KNL]
Test RCU priority boosting? 0=no, 1=maybe, 2=yes.
"Maybe" means test if the RCU implementation
under test support RCU priority boosting.
- rcutorture.test_boost_duration= [KNL,BOOT]
+ rcutorture.test_boost_duration= [KNL]
Duration (s) of each individual boost test.
- rcutorture.test_boost_interval= [KNL,BOOT]
+ rcutorture.test_boost_interval= [KNL]
Interval (s) between each boost test.
- rcutorture.test_no_idle_hz= [KNL,BOOT]
+ rcutorture.test_no_idle_hz= [KNL]
Test RCU's dyntick-idle handling. See also the
rcutorture.shuffle_interval parameter.
- rcutorture.torture_type= [KNL,BOOT]
+ rcutorture.torture_type= [KNL]
Specify the RCU implementation to test.
- rcutorture.verbose= [KNL,BOOT]
+ rcutorture.verbose= [KNL]
Enable additional printk() statements.
+ rcupdate.rcu_expedited= [KNL]
+ Use expedited grace-period primitives, for
+ example, synchronize_rcu_expedited() instead
+ of synchronize_rcu(). This reduces latency,
+ but can increase CPU utilization, degrade
+ real-time latency, and degrade energy efficiency.
+
+ rcupdate.rcu_cpu_stall_suppress= [KNL]
+ Suppress RCU CPU stall warning messages.
+
+ rcupdate.rcu_cpu_stall_timeout= [KNL]
+ Set timeout for RCU CPU stall warning messages.
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
projects / ~andy / linux / blobdiff