[ALSA] Routines for effect processor FX8010: Use list_for_each_entry

[~andy/linux] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f27cdd7125f2c134ac2d37e920ac6ca1add2e17c..085e4a095eaaec661ae46a61dda993af3c3cb060 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -68,6 +68,7 @@ parameter is applicable:
        PARIDE  The ParIDE (parallel port IDE) subsystem is enabled.
        PARISC  The PA-RISC architecture is enabled.
        PCI     PCI bus support is enabled.
+       PCIE    PCI Express support is enabled.
        PCMCIA  The PCMCIA subsystem is enabled.
        PNP     Plug & Play support is enabled.
        PPC     PowerPC architecture is enabled.
@@ -864,6 +865,10 @@ and is between 256 and 4096 characters. It is defined in the file
        lasi=           [HW,SCSI] PARISC LASI driver for the 53c700 chip
                        Format: addr:<io>,irq:<irq>
 
+       libata.noacpi   [LIBATA] Disables use of ACPI in libata suspend/resume
+                       when set.
+                       Format: <int>
+
        load_ramdisk=   [RAM] List of ramdisks to load from floppy
                        See Documentation/ramdisk.txt.
 
@@ -1078,16 +1083,19 @@ and is between 256 and 4096 characters. It is defined in the file
                        [NFS] set the maximum lifetime for idmapper cache
                        entries.
 
+       nfs.enable_ino64=
+                       [NFS] enable 64-bit inode numbers.
+                       If zero, the NFS client will fake up a 32-bit inode
+                       number for the readdir() and stat() syscalls instead
+                       of returning the full 64-bit number.
+                       The default is to return 64-bit inode numbers.
+
        nmi_watchdog=   [KNL,BUGS=X86-32] Debugging features for SMP kernels
 
        no387           [BUGS=X86-32] Tells the kernel to use the 387 maths
                        emulation library even if a 387 maths coprocessor
                        is present.
 
-       noacpi          [LIBATA] Disables use of ACPI in libata suspend/resume
-                       when set.
-                       Format: <int>
-
        noaliencache    [MM, NUMA, SLAB] Disables the allocation of alien
                        caches in the slab allocator.  Saves per-node memory,
                        but will impact performance.
@@ -1277,6 +1285,11 @@ and is between 256 and 4096 characters. It is defined in the file
                                Mechanism 1.
                conf2           [X86-32] Force use of PCI Configuration
                                Mechanism 2.
+               noaer           [PCIE] If the PCIEAER kernel config parameter is
+                               enabled, this kernel boot option can be used to
+                               disable the use of PCIE advanced error reporting.
+               nodomains       [PCI] Disable support for multiple PCI
+                               root domains (aka PCI segments, in ACPI-speak).
                nommconf        [X86-32,X86_64] Disable use of MMCONFIG for PCI
                                Configuration
                nomsi           [MSI] If the PCI_MSI kernel config parameter is
@@ -1321,6 +1334,8 @@ and is between 256 and 4096 characters. It is defined in the file
                                IRQ routing is enabled.
                noacpi          [X86-32] Do not use ACPI for IRQ routing
                                or for PCI scanning.
+               use_crs         [X86-32] Use _CRS for PCI resource
+                               allocation.
                routeirq        Do IRQ routing for all PCI devices.
                                This is normally done in pci_enable_device(),
                                so this option is a temporary workaround
@@ -1437,6 +1452,10 @@ and is between 256 and 4096 characters. It is defined in the file
        pt.             [PARIDE]
                        See Documentation/paride.txt.
 
+       pty.legacy_count=
+                       [KNL] Number of legacy pty's. Overwrites compiled-in
+                       default number.
+
        quiet           [KNL] Disable most log messages
 
        r128=           [HW,DRM]
@@ -1871,9 +1890,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format:
                        <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
 
-       tsdev.xres=     [TS] Horizontal screen resolution.
-       tsdev.yres=     [TS] Vertical screen resolution.
-
        turbografx.map[2|3]=    [HW,JOY]
                        TurboGraFX parallel port interface
                        Format: