Pull percpu-dtc into release branch

[~andy/linux] / Documentation / i2c / busses / i2c-viapro

diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 16775663b9f5a5f9831fa2e251299352cced3ec7..775f489e86f63162d9abe00b1588f4b515704521 100644 (file)
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -7,9 +7,15 @@ Supported adapters:
   * VIA Technologies, Inc. VT82C686A/B
     Datasheet: Sometimes available at the VIA website
 
-  * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R
+  * VIA Technologies, Inc. VT8231, VT8233, VT8233A
     Datasheet: available on request from VIA
 
+  * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251
+    Datasheet: available on request and under NDA from VIA
+
+  * VIA Technologies, Inc. CX700
+    Datasheet: available on request and under NDA from VIA
+
 Authors:
        Kyösti Mälkki <kmalkki@cc.hut.fi>,
        Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -39,6 +45,9 @@ Your lspci -n listing must show one of these :
  device 1106:8235   (VT8231 function 4)
  device 1106:3177   (VT8235)
  device 1106:3227   (VT8237R)
+ device 1106:3337   (VT8237A)
+ device 1106:3287   (VT8251)
+ device 1106:8324   (CX700)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.
@@ -46,3 +55,6 @@ enable ACPI / SMBus or even USB.
 Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
 VT8231), this driver supports I2C block transactions. Such transactions
 are mainly useful to read from and write to EEPROMs.
+
+The CX700 additionally appears to support SMBus PEC, although this driver
+doesn't implement it yet.