Merge git://git.kvack.org/~bcrl/aio-next

[~andy/linux] / Documentation / devicetree / bindings / pci / mvebu-pci.txt

diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 9556e2fedf6deb77a1b49579521b7744f7318d1e..08c716b2c6b6c411a13a04055ec267ce3ac5e4f2 100644 (file)
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -5,6 +5,7 @@ Mandatory properties:
 - compatible: one of the following values:
     marvell,armada-370-pcie
     marvell,armada-xp-pcie
+    marvell,dove-pcie
     marvell,kirkwood-pcie
 - #address-cells, set to <3>
 - #size-cells, set to <2>
@@ -14,6 +15,8 @@ Mandatory properties:
 - ranges: ranges describing the MMIO registers to control the PCIe
   interfaces, and ranges describing the MBus windows needed to access
   the memory and I/O regions of each PCIe interface.
+- msi-parent: Link to the hardware entity that serves as the Message
+  Signaled Interrupt controller for this PCI controller.
 
 The ranges describing the MMIO registers have the following layout:
 
@@ -74,6 +77,8 @@ and the following optional properties:
 - marvell,pcie-lane: the physical PCIe lane number, for ports having
   multiple lanes. If this property is not found, we assume that the
   value is 0.
+- reset-gpios: optional gpio to PERST#
+- reset-delay-us: delay in us to wait after reset de-assertion
 
 Example:
 
@@ -86,6 +91,7 @@ pcie-controller {
        #size-cells = <2>;
 
        bus-range = <0x00 0xff>;
+       msi-parent = <&mpic>;
 
        ranges =
               <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
@@ -135,6 +141,10 @@ pcie-controller {
                interrupt-map = <0 0 0 0 &mpic 58>;
                marvell,pcie-port = <0>;
                marvell,pcie-lane = <0>;
+               /* low-active PERST# reset on GPIO 25 */
+               reset-gpios = <&gpio0 25 1>;
+               /* wait 20ms for device settle after reset deassertion */
+               reset-delay-us = <20000>;
                clocks = <&gateclk 5>;
                status = "disabled";
        };