]> Pileus Git - ~andy/linux/blobdiff - Documentation/devicetree/bindings/fb/mxsfb.txt
Merge branch 'late/dt' into next/dt2
[~andy/linux] / Documentation / devicetree / bindings / fb / mxsfb.txt
index b41e5e52a676c4cf28f7c0529e9cb64d46a3b0a6..96ec5179c8a00199e2056ee574c3c55aef37bae3 100644 (file)
@@ -5,9 +5,16 @@ Required properties:
   imx23 and imx28.
 - reg: Address and length of the register set for lcdif
 - interrupts: Should contain lcdif interrupts
+- display : phandle to display node (see below for details)
 
-Optional properties:
-- panel-enable-gpios : Should specify the gpio for panel enable
+* display node
+
+Required properties:
+- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
+- bus-width : number of data lines.  Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings : Refer to binding doc display-timing.txt for details.
 
 Examples:
 
@@ -15,5 +22,28 @@ lcdif@80030000 {
        compatible = "fsl,imx28-lcdif";
        reg = <0x80030000 2000>;
        interrupts = <38 86>;
-       panel-enable-gpios = <&gpio3 30 0>;
+
+       display: display {
+               bits-per-pixel = <32>;
+               bus-width = <24>;
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: timing0 {
+                               clock-frequency = <33500000>;
+                               hactive = <800>;
+                               vactive = <480>;
+                               hfront-porch = <164>;
+                               hback-porch = <89>;
+                               hsync-len = <10>;
+                               vback-porch = <23>;
+                               vfront-porch = <10>;
+                               vsync-len = <10>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <0>;
+                       };
+               };
+       };
 };