Linux 3.14

[~andy/linux] / Documentation / blockdev / nbd.txt

diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.txt
index aeb93ffe64163173e37cf099a63451b6540551d0..271e607304da0449a2c7b0f90841efa7aa55e876 100644 (file)
--- a/Documentation/blockdev/nbd.txt
+++ b/Documentation/blockdev/nbd.txt
@@ -4,43 +4,13 @@
    can use a remote server as one of its block devices. So every time
    the client computer wants to read, e.g., /dev/nb0, it sends a
    request over TCP to the server, which will reply with the data read.
-   This can be used for stations with low disk space (or even diskless -
-   if you boot from floppy) to borrow disk space from another computer.
-   Unlike NFS, it is possible to put any filesystem on it, etc. It should
-   even be possible to use NBD as a root filesystem (I've never tried),
-   but it requires a user-level program to be in the initrd to start.
-   It also allows you to run block-device in user land (making server
-   and client physically the same computer, communicating using loopback).
-   
-   Current state: It currently works. Network block device is stable.
-   I originally thought that it was impossible to swap over TCP. It
-   turned out not to be true - swapping over TCP now works and seems
-   to be deadlock-free, but it requires heavy patches into Linux's
-   network layer.
-   
+   This can be used for stations with low disk space (or even diskless)
+   to borrow disk space from another computer.
+   Unlike NFS, it is possible to put any filesystem on it, etc.
+
    For more information, or to download the nbd-client and nbd-server
    tools, go to http://nbd.sf.net/.
 
-   Howto: To setup nbd, you can simply do the following:
-
-   First, serve a device or file from a remote server:
-
-   nbd-server <port-number> <device-or-file-to-serve-to-client>
-
-   e.g.,
-       root@server1 # nbd-server 1234 /dev/sdb1
-
-       (serves sdb1 partition on TCP port 1234)
-
-   Then, on the local (client) system:
-
-   nbd-client <server-name-or-IP> <server-port-number> /dev/nb[0-n]
-
-   e.g.,
-       root@client1 # nbd-client server1 1234 /dev/nb0
-
-       (creates the nb0 device on client1)
-
    The nbd kernel module need only be installed on the client
    system, as the nbd-server is completely in userspace. In fact,
    the nbd-server has been successfully ported to other operating