+ case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
+ case MAX77693_CHARGER_TYPE_NONE:
+ /* Check MAX77693_CABLE_GROUP_ADC_GND type */
+ cable_type_gnd = max77693_muic_get_cable_type(info,
+ MAX77693_CABLE_GROUP_ADC_GND,
+ &cable_attached);
+ switch (cable_type_gnd) {
+ case MAX77693_MUIC_GND_MHL:
+ case MAX77693_MUIC_GND_MHL_VB:
+ /*
+ * MHL cable with MHL_TA(USB/TA) cable
+ * - MHL cable include two port(HDMI line and separate micro-
+ * usb port. When the target connect MHL cable, extcon driver
+ * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA
+ * cable is connected, extcon driver notify state to notifiee
+ * for charging battery.
+ *
+ * Features of 'MHL_TA(USB/TA) with MHL cable'
+ * - Support MHL
+ * - Support charging through micro-usb port without data connection
+ */
+ extcon_set_cable_state(info->edev, "MHL_TA", attached);
+ if (!cable_attached)
+ extcon_set_cable_state(info->edev, "MHL", cable_attached);
+ break;
+ }
+
+ /* Check MAX77693_CABLE_GROUP_ADC type */
+ cable_type = max77693_muic_get_cable_type(info,
+ MAX77693_CABLE_GROUP_ADC,
+ &cable_attached);
+ switch (cable_type) {
+ case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
+ /*
+ * Dock-Audio device with USB/TA cable
+ * - Dock device include two port(Dock-Audio and micro-usb
+ * port). When the target connect Dock-Audio device, extcon
+ * driver check whether USB/TA cable is connected. If USB/TA
+ * cable is connected, extcon driver notify state to notifiee
+ * for charging battery.
+ *
+ * Features of 'USB/TA cable with Dock-Audio device'
+ * - Support external output feature of audio.
+ * - Support charging through micro-usb port without data
+ * connection.
+ */
+ extcon_set_cable_state(info->edev, "USB", attached);
+
+ if (!cable_attached)
+ extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached);
+ break;
+ case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
+ /*
+ * Dock-Smart device with USB/TA cable
+ * - Dock-Desk device include three type of cable which
+ * are HDMI, USB for mouse/keyboard and micro-usb port
+ * for USB/TA cable. Dock-Smart device need always exteranl
+ * power supply(USB/TA cable through micro-usb cable). Dock-
+ * Smart device support screen output of target to separate
+ * monitor and mouse/keyboard for desktop mode.
+ *
+ * Features of 'USB/TA cable with Dock-Smart device'
+ * - Support MHL
+ * - Support external output feature of audio
+ * - Support charging through micro-usb port without data
+ * connection if TA cable is connected to target.
+ * - Support charging and data connection through micro-usb port
+ * if USB cable is connected between target and host
+ * device.
+ * - Support OTG device (Mouse/Keyboard)
+ */
+ ret = max77693_muic_set_path(info, info->path_usb, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "Dock-Smart", attached);
+ extcon_set_cable_state(info->edev, "MHL", attached);
+
+ break;
+ }
+
+ /* Check MAX77693_CABLE_GROUP_CHG type */
+ switch (chg_type) {
+ case MAX77693_CHARGER_TYPE_NONE:
+ /*
+ * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable
+ * is attached, muic device happen below two interrupt.
+ * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio.
+ * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable
+ * connected to MHL or Dock-Audio.
+ * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt
+ * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt.
+ *
+ * If user attach MHL (with USB/TA cable and immediately detach
+ * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP
+ * interrupt is happened, USB/TA cable remain connected state to
+ * target. But USB/TA cable isn't connected to target. The user
+ * be face with unusual action. So, driver should check this
+ * situation in spite of, that previous charger type is N/A.
+ */
+ break;
+ case MAX77693_CHARGER_TYPE_USB:
+ /* Only USB cable, PATH:AP_USB */
+ ret = max77693_muic_set_path(info, info->path_usb, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB", attached);
+ break;
+ case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
+ /* Only TA cable */
+ extcon_set_cable_state(info->edev, "TA", attached);
+ break;
+ }