]> Pileus Git - ~andy/linux/blob - net/wireless/core.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwif...
[~andy/linux] / net / wireless / core.c
1 /*
2  * This is the linux wireless configuration interface.
3  *
4  * Copyright 2006-2010          Johannes Berg <johannes@sipsolutions.net>
5  */
6
7 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
8
9 #include <linux/if.h>
10 #include <linux/module.h>
11 #include <linux/err.h>
12 #include <linux/list.h>
13 #include <linux/slab.h>
14 #include <linux/nl80211.h>
15 #include <linux/debugfs.h>
16 #include <linux/notifier.h>
17 #include <linux/device.h>
18 #include <linux/etherdevice.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/sched.h>
21 #include <net/genetlink.h>
22 #include <net/cfg80211.h>
23 #include "nl80211.h"
24 #include "core.h"
25 #include "sysfs.h"
26 #include "debugfs.h"
27 #include "wext-compat.h"
28 #include "ethtool.h"
29 #include "rdev-ops.h"
30
31 /* name for sysfs, %d is appended */
32 #define PHY_NAME "phy"
33
34 MODULE_AUTHOR("Johannes Berg");
35 MODULE_LICENSE("GPL");
36 MODULE_DESCRIPTION("wireless configuration support");
37 MODULE_ALIAS_GENL_FAMILY(NL80211_GENL_NAME);
38
39 /* RCU-protected (and RTNL for writers) */
40 LIST_HEAD(cfg80211_rdev_list);
41 int cfg80211_rdev_list_generation;
42
43 /* for debugfs */
44 static struct dentry *ieee80211_debugfs_dir;
45
46 /* for the cleanup, scan and event works */
47 struct workqueue_struct *cfg80211_wq;
48
49 static bool cfg80211_disable_40mhz_24ghz;
50 module_param(cfg80211_disable_40mhz_24ghz, bool, 0644);
51 MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz,
52                  "Disable 40MHz support in the 2.4GHz band");
53
54 struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
55 {
56         struct cfg80211_registered_device *result = NULL, *rdev;
57
58         ASSERT_RTNL();
59
60         list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
61                 if (rdev->wiphy_idx == wiphy_idx) {
62                         result = rdev;
63                         break;
64                 }
65         }
66
67         return result;
68 }
69
70 int get_wiphy_idx(struct wiphy *wiphy)
71 {
72         struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
73
74         return rdev->wiphy_idx;
75 }
76
77 struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
78 {
79         struct cfg80211_registered_device *rdev;
80
81         ASSERT_RTNL();
82
83         rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
84         if (!rdev)
85                 return NULL;
86         return &rdev->wiphy;
87 }
88
89 int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
90                         char *newname)
91 {
92         struct cfg80211_registered_device *rdev2;
93         int wiphy_idx, taken = -1, result, digits;
94
95         ASSERT_RTNL();
96
97         /* prohibit calling the thing phy%d when %d is not its number */
98         sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
99         if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
100                 /* count number of places needed to print wiphy_idx */
101                 digits = 1;
102                 while (wiphy_idx /= 10)
103                         digits++;
104                 /*
105                  * deny the name if it is phy<idx> where <idx> is printed
106                  * without leading zeroes. taken == strlen(newname) here
107                  */
108                 if (taken == strlen(PHY_NAME) + digits)
109                         return -EINVAL;
110         }
111
112
113         /* Ignore nop renames */
114         if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0)
115                 return 0;
116
117         /* Ensure another device does not already have this name. */
118         list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
119                 if (strcmp(newname, dev_name(&rdev2->wiphy.dev)) == 0)
120                         return -EINVAL;
121
122         result = device_rename(&rdev->wiphy.dev, newname);
123         if (result)
124                 return result;
125
126         if (rdev->wiphy.debugfsdir &&
127             !debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
128                             rdev->wiphy.debugfsdir,
129                             rdev->wiphy.debugfsdir->d_parent,
130                             newname))
131                 pr_err("failed to rename debugfs dir to %s!\n", newname);
132
133         nl80211_notify_dev_rename(rdev);
134
135         return 0;
136 }
137
138 int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
139                           struct net *net)
140 {
141         struct wireless_dev *wdev;
142         int err = 0;
143
144         if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK))
145                 return -EOPNOTSUPP;
146
147         list_for_each_entry(wdev, &rdev->wdev_list, list) {
148                 if (!wdev->netdev)
149                         continue;
150                 wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
151                 err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
152                 if (err)
153                         break;
154                 wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
155         }
156
157         if (err) {
158                 /* failed -- clean up to old netns */
159                 net = wiphy_net(&rdev->wiphy);
160
161                 list_for_each_entry_continue_reverse(wdev, &rdev->wdev_list,
162                                                      list) {
163                         if (!wdev->netdev)
164                                 continue;
165                         wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
166                         err = dev_change_net_namespace(wdev->netdev, net,
167                                                         "wlan%d");
168                         WARN_ON(err);
169                         wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
170                 }
171
172                 return err;
173         }
174
175         wiphy_net_set(&rdev->wiphy, net);
176
177         err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev));
178         WARN_ON(err);
179
180         return 0;
181 }
182
183 static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
184 {
185         struct cfg80211_registered_device *rdev = data;
186
187         rdev_rfkill_poll(rdev);
188 }
189
190 void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
191                               struct wireless_dev *wdev)
192 {
193         ASSERT_RTNL();
194
195         if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
196                 return;
197
198         if (!wdev->p2p_started)
199                 return;
200
201         rdev_stop_p2p_device(rdev, wdev);
202         wdev->p2p_started = false;
203
204         rdev->opencount--;
205
206         if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
207                 /*
208                  * If the scan request wasn't notified as done, set it
209                  * to aborted and leak it after a warning. The driver
210                  * should have notified us that it ended at the latest
211                  * during rdev_stop_p2p_device().
212                  */
213                 if (WARN_ON(!rdev->scan_req->notified))
214                         rdev->scan_req->aborted = true;
215                 ___cfg80211_scan_done(rdev, !rdev->scan_req->notified);
216         }
217 }
218
219 static int cfg80211_rfkill_set_block(void *data, bool blocked)
220 {
221         struct cfg80211_registered_device *rdev = data;
222         struct wireless_dev *wdev;
223
224         if (!blocked)
225                 return 0;
226
227         rtnl_lock();
228
229         list_for_each_entry(wdev, &rdev->wdev_list, list) {
230                 if (wdev->netdev) {
231                         dev_close(wdev->netdev);
232                         continue;
233                 }
234                 /* otherwise, check iftype */
235                 switch (wdev->iftype) {
236                 case NL80211_IFTYPE_P2P_DEVICE:
237                         cfg80211_stop_p2p_device(rdev, wdev);
238                         break;
239                 default:
240                         break;
241                 }
242         }
243
244         rtnl_unlock();
245
246         return 0;
247 }
248
249 static void cfg80211_rfkill_sync_work(struct work_struct *work)
250 {
251         struct cfg80211_registered_device *rdev;
252
253         rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync);
254         cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill));
255 }
256
257 static void cfg80211_event_work(struct work_struct *work)
258 {
259         struct cfg80211_registered_device *rdev;
260
261         rdev = container_of(work, struct cfg80211_registered_device,
262                             event_work);
263
264         rtnl_lock();
265         cfg80211_process_rdev_events(rdev);
266         rtnl_unlock();
267 }
268
269 /* exported functions */
270
271 struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
272 {
273         static atomic_t wiphy_counter = ATOMIC_INIT(0);
274
275         struct cfg80211_registered_device *rdev;
276         int alloc_size;
277
278         WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
279         WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
280         WARN_ON(ops->connect && !ops->disconnect);
281         WARN_ON(ops->join_ibss && !ops->leave_ibss);
282         WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
283         WARN_ON(ops->add_station && !ops->del_station);
284         WARN_ON(ops->add_mpath && !ops->del_mpath);
285         WARN_ON(ops->join_mesh && !ops->leave_mesh);
286
287         alloc_size = sizeof(*rdev) + sizeof_priv;
288
289         rdev = kzalloc(alloc_size, GFP_KERNEL);
290         if (!rdev)
291                 return NULL;
292
293         rdev->ops = ops;
294
295         rdev->wiphy_idx = atomic_inc_return(&wiphy_counter);
296
297         if (unlikely(rdev->wiphy_idx < 0)) {
298                 /* ugh, wrapped! */
299                 atomic_dec(&wiphy_counter);
300                 kfree(rdev);
301                 return NULL;
302         }
303
304         /* atomic_inc_return makes it start at 1, make it start at 0 */
305         rdev->wiphy_idx--;
306
307         /* give it a proper name */
308         dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
309
310         INIT_LIST_HEAD(&rdev->wdev_list);
311         INIT_LIST_HEAD(&rdev->beacon_registrations);
312         spin_lock_init(&rdev->beacon_registrations_lock);
313         spin_lock_init(&rdev->bss_lock);
314         INIT_LIST_HEAD(&rdev->bss_list);
315         INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
316         INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
317         INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk,
318                           cfg80211_dfs_channels_update_work);
319 #ifdef CONFIG_CFG80211_WEXT
320         rdev->wiphy.wext = &cfg80211_wext_handler;
321 #endif
322
323         device_initialize(&rdev->wiphy.dev);
324         rdev->wiphy.dev.class = &ieee80211_class;
325         rdev->wiphy.dev.platform_data = rdev;
326
327 #ifdef CONFIG_CFG80211_DEFAULT_PS
328         rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
329 #endif
330
331         wiphy_net_set(&rdev->wiphy, &init_net);
332
333         rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
334         rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
335                                    &rdev->wiphy.dev, RFKILL_TYPE_WLAN,
336                                    &rdev->rfkill_ops, rdev);
337
338         if (!rdev->rfkill) {
339                 kfree(rdev);
340                 return NULL;
341         }
342
343         INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work);
344         INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
345         INIT_WORK(&rdev->event_work, cfg80211_event_work);
346
347         init_waitqueue_head(&rdev->dev_wait);
348
349         /*
350          * Initialize wiphy parameters to IEEE 802.11 MIB default values.
351          * Fragmentation and RTS threshold are disabled by default with the
352          * special -1 value.
353          */
354         rdev->wiphy.retry_short = 7;
355         rdev->wiphy.retry_long = 4;
356         rdev->wiphy.frag_threshold = (u32) -1;
357         rdev->wiphy.rts_threshold = (u32) -1;
358         rdev->wiphy.coverage_class = 0;
359
360         rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
361
362         return &rdev->wiphy;
363 }
364 EXPORT_SYMBOL(wiphy_new);
365
366 static int wiphy_verify_combinations(struct wiphy *wiphy)
367 {
368         const struct ieee80211_iface_combination *c;
369         int i, j;
370
371         for (i = 0; i < wiphy->n_iface_combinations; i++) {
372                 u32 cnt = 0;
373                 u16 all_iftypes = 0;
374
375                 c = &wiphy->iface_combinations[i];
376
377                 /*
378                  * Combinations with just one interface aren't real,
379                  * however we make an exception for DFS.
380                  */
381                 if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths))
382                         return -EINVAL;
383
384                 /* Need at least one channel */
385                 if (WARN_ON(!c->num_different_channels))
386                         return -EINVAL;
387
388                 /*
389                  * Put a sane limit on maximum number of different
390                  * channels to simplify channel accounting code.
391                  */
392                 if (WARN_ON(c->num_different_channels >
393                                 CFG80211_MAX_NUM_DIFFERENT_CHANNELS))
394                         return -EINVAL;
395
396                 /* DFS only works on one channel. */
397                 if (WARN_ON(c->radar_detect_widths &&
398                             (c->num_different_channels > 1)))
399                         return -EINVAL;
400
401                 if (WARN_ON(!c->n_limits))
402                         return -EINVAL;
403
404                 for (j = 0; j < c->n_limits; j++) {
405                         u16 types = c->limits[j].types;
406
407                         /*
408                          * interface types shouldn't overlap, this is
409                          * used in cfg80211_can_change_interface()
410                          */
411                         if (WARN_ON(types & all_iftypes))
412                                 return -EINVAL;
413                         all_iftypes |= types;
414
415                         if (WARN_ON(!c->limits[j].max))
416                                 return -EINVAL;
417
418                         /* Shouldn't list software iftypes in combinations! */
419                         if (WARN_ON(wiphy->software_iftypes & types))
420                                 return -EINVAL;
421
422                         /* Only a single P2P_DEVICE can be allowed */
423                         if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
424                                     c->limits[j].max > 1))
425                                 return -EINVAL;
426
427                         cnt += c->limits[j].max;
428                         /*
429                          * Don't advertise an unsupported type
430                          * in a combination.
431                          */
432                         if (WARN_ON((wiphy->interface_modes & types) != types))
433                                 return -EINVAL;
434                 }
435
436                 /* You can't even choose that many! */
437                 if (WARN_ON(cnt < c->max_interfaces))
438                         return -EINVAL;
439         }
440
441         return 0;
442 }
443
444 int wiphy_register(struct wiphy *wiphy)
445 {
446         struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
447         int res;
448         enum ieee80211_band band;
449         struct ieee80211_supported_band *sband;
450         bool have_band = false;
451         int i;
452         u16 ifmodes = wiphy->interface_modes;
453
454         /* support for 5/10 MHz is broken due to nl80211 API mess - disable */
455         wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ;
456
457 #ifdef CONFIG_PM
458         if (WARN_ON(wiphy->wowlan &&
459                     (wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
460                     !(wiphy->wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
461                 return -EINVAL;
462         if (WARN_ON(wiphy->wowlan &&
463                     !wiphy->wowlan->flags && !wiphy->wowlan->n_patterns &&
464                     !wiphy->wowlan->tcp))
465                 return -EINVAL;
466 #endif
467
468         if (WARN_ON(wiphy->coalesce &&
469                     (!wiphy->coalesce->n_rules ||
470                      !wiphy->coalesce->n_patterns) &&
471                     (!wiphy->coalesce->pattern_min_len ||
472                      wiphy->coalesce->pattern_min_len >
473                         wiphy->coalesce->pattern_max_len)))
474                 return -EINVAL;
475
476         if (WARN_ON(wiphy->ap_sme_capa &&
477                     !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
478                 return -EINVAL;
479
480         if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
481                 return -EINVAL;
482
483         if (WARN_ON(wiphy->addresses &&
484                     !is_zero_ether_addr(wiphy->perm_addr) &&
485                     memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
486                            ETH_ALEN)))
487                 return -EINVAL;
488
489         if (WARN_ON(wiphy->max_acl_mac_addrs &&
490                     (!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) ||
491                      !rdev->ops->set_mac_acl)))
492                 return -EINVAL;
493
494         if (wiphy->addresses)
495                 memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
496
497         /* sanity check ifmodes */
498         WARN_ON(!ifmodes);
499         ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1;
500         if (WARN_ON(ifmodes != wiphy->interface_modes))
501                 wiphy->interface_modes = ifmodes;
502
503         res = wiphy_verify_combinations(wiphy);
504         if (res)
505                 return res;
506
507         /* sanity check supported bands/channels */
508         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
509                 sband = wiphy->bands[band];
510                 if (!sband)
511                         continue;
512
513                 sband->band = band;
514                 if (WARN_ON(!sband->n_channels))
515                         return -EINVAL;
516                 /*
517                  * on 60gHz band, there are no legacy rates, so
518                  * n_bitrates is 0
519                  */
520                 if (WARN_ON(band != IEEE80211_BAND_60GHZ &&
521                             !sband->n_bitrates))
522                         return -EINVAL;
523
524                 /*
525                  * Since cfg80211_disable_40mhz_24ghz is global, we can
526                  * modify the sband's ht data even if the driver uses a
527                  * global structure for that.
528                  */
529                 if (cfg80211_disable_40mhz_24ghz &&
530                     band == IEEE80211_BAND_2GHZ &&
531                     sband->ht_cap.ht_supported) {
532                         sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
533                         sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
534                 }
535
536                 /*
537                  * Since we use a u32 for rate bitmaps in
538                  * ieee80211_get_response_rate, we cannot
539                  * have more than 32 legacy rates.
540                  */
541                 if (WARN_ON(sband->n_bitrates > 32))
542                         return -EINVAL;
543
544                 for (i = 0; i < sband->n_channels; i++) {
545                         sband->channels[i].orig_flags =
546                                 sband->channels[i].flags;
547                         sband->channels[i].orig_mag = INT_MAX;
548                         sband->channels[i].orig_mpwr =
549                                 sband->channels[i].max_power;
550                         sband->channels[i].band = band;
551                 }
552
553                 have_band = true;
554         }
555
556         if (!have_band) {
557                 WARN_ON(1);
558                 return -EINVAL;
559         }
560
561 #ifdef CONFIG_PM
562         if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
563                     (!rdev->wiphy.wowlan->pattern_min_len ||
564                      rdev->wiphy.wowlan->pattern_min_len >
565                                 rdev->wiphy.wowlan->pattern_max_len)))
566                 return -EINVAL;
567 #endif
568
569         /* check and set up bitrates */
570         ieee80211_set_bitrate_flags(wiphy);
571
572         rtnl_lock();
573         res = device_add(&rdev->wiphy.dev);
574         if (res) {
575                 rtnl_unlock();
576                 return res;
577         }
578
579         /* set up regulatory info */
580         wiphy_regulatory_register(wiphy);
581
582         list_add_rcu(&rdev->list, &cfg80211_rdev_list);
583         cfg80211_rdev_list_generation++;
584
585         /* add to debugfs */
586         rdev->wiphy.debugfsdir =
587                 debugfs_create_dir(wiphy_name(&rdev->wiphy),
588                                    ieee80211_debugfs_dir);
589         if (IS_ERR(rdev->wiphy.debugfsdir))
590                 rdev->wiphy.debugfsdir = NULL;
591
592         if (wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
593                 struct regulatory_request request;
594
595                 request.wiphy_idx = get_wiphy_idx(wiphy);
596                 request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
597                 request.alpha2[0] = '9';
598                 request.alpha2[1] = '9';
599
600                 nl80211_send_reg_change_event(&request);
601         }
602
603         cfg80211_debugfs_rdev_add(rdev);
604
605         rdev->wiphy.registered = true;
606         rtnl_unlock();
607
608         res = rfkill_register(rdev->rfkill);
609         if (res) {
610                 rfkill_destroy(rdev->rfkill);
611                 rdev->rfkill = NULL;
612                 wiphy_unregister(&rdev->wiphy);
613                 return res;
614         }
615
616         return 0;
617 }
618 EXPORT_SYMBOL(wiphy_register);
619
620 void wiphy_rfkill_start_polling(struct wiphy *wiphy)
621 {
622         struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
623
624         if (!rdev->ops->rfkill_poll)
625                 return;
626         rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
627         rfkill_resume_polling(rdev->rfkill);
628 }
629 EXPORT_SYMBOL(wiphy_rfkill_start_polling);
630
631 void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
632 {
633         struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
634
635         rfkill_pause_polling(rdev->rfkill);
636 }
637 EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
638
639 void wiphy_unregister(struct wiphy *wiphy)
640 {
641         struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
642
643         wait_event(rdev->dev_wait, ({
644                 int __count;
645                 rtnl_lock();
646                 __count = rdev->opencount;
647                 rtnl_unlock();
648                 __count == 0; }));
649
650         if (rdev->rfkill)
651                 rfkill_unregister(rdev->rfkill);
652
653         rtnl_lock();
654         rdev->wiphy.registered = false;
655
656         BUG_ON(!list_empty(&rdev->wdev_list));
657
658         /*
659          * First remove the hardware from everywhere, this makes
660          * it impossible to find from userspace.
661          */
662         debugfs_remove_recursive(rdev->wiphy.debugfsdir);
663         list_del_rcu(&rdev->list);
664         synchronize_rcu();
665
666         /*
667          * If this device got a regulatory hint tell core its
668          * free to listen now to a new shiny device regulatory hint
669          */
670         wiphy_regulatory_deregister(wiphy);
671
672         cfg80211_rdev_list_generation++;
673         device_del(&rdev->wiphy.dev);
674
675         rtnl_unlock();
676
677         flush_work(&rdev->scan_done_wk);
678         cancel_work_sync(&rdev->conn_work);
679         flush_work(&rdev->event_work);
680         cancel_delayed_work_sync(&rdev->dfs_update_channels_wk);
681
682 #ifdef CONFIG_PM
683         if (rdev->wiphy.wowlan_config && rdev->ops->set_wakeup)
684                 rdev_set_wakeup(rdev, false);
685 #endif
686         cfg80211_rdev_free_wowlan(rdev);
687         cfg80211_rdev_free_coalesce(rdev);
688 }
689 EXPORT_SYMBOL(wiphy_unregister);
690
691 void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
692 {
693         struct cfg80211_internal_bss *scan, *tmp;
694         struct cfg80211_beacon_registration *reg, *treg;
695         rfkill_destroy(rdev->rfkill);
696         list_for_each_entry_safe(reg, treg, &rdev->beacon_registrations, list) {
697                 list_del(&reg->list);
698                 kfree(reg);
699         }
700         list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
701                 cfg80211_put_bss(&rdev->wiphy, &scan->pub);
702         kfree(rdev);
703 }
704
705 void wiphy_free(struct wiphy *wiphy)
706 {
707         put_device(&wiphy->dev);
708 }
709 EXPORT_SYMBOL(wiphy_free);
710
711 void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
712 {
713         struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
714
715         if (rfkill_set_hw_state(rdev->rfkill, blocked))
716                 schedule_work(&rdev->rfkill_sync);
717 }
718 EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
719
720 void cfg80211_unregister_wdev(struct wireless_dev *wdev)
721 {
722         struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
723
724         ASSERT_RTNL();
725
726         if (WARN_ON(wdev->netdev))
727                 return;
728
729         list_del_rcu(&wdev->list);
730         rdev->devlist_generation++;
731
732         switch (wdev->iftype) {
733         case NL80211_IFTYPE_P2P_DEVICE:
734                 cfg80211_stop_p2p_device(rdev, wdev);
735                 break;
736         default:
737                 WARN_ON_ONCE(1);
738                 break;
739         }
740 }
741 EXPORT_SYMBOL(cfg80211_unregister_wdev);
742
743 static struct device_type wiphy_type = {
744         .name   = "wlan",
745 };
746
747 void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
748                                enum nl80211_iftype iftype, int num)
749 {
750         ASSERT_RTNL();
751
752         rdev->num_running_ifaces += num;
753         if (iftype == NL80211_IFTYPE_MONITOR)
754                 rdev->num_running_monitor_ifaces += num;
755 }
756
757 void cfg80211_leave(struct cfg80211_registered_device *rdev,
758                     struct wireless_dev *wdev)
759 {
760         struct net_device *dev = wdev->netdev;
761
762         switch (wdev->iftype) {
763         case NL80211_IFTYPE_ADHOC:
764                 cfg80211_leave_ibss(rdev, dev, true);
765                 break;
766         case NL80211_IFTYPE_P2P_CLIENT:
767         case NL80211_IFTYPE_STATION:
768                 __cfg80211_stop_sched_scan(rdev, false);
769
770                 wdev_lock(wdev);
771 #ifdef CONFIG_CFG80211_WEXT
772                 kfree(wdev->wext.ie);
773                 wdev->wext.ie = NULL;
774                 wdev->wext.ie_len = 0;
775                 wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
776 #endif
777                 cfg80211_disconnect(rdev, dev,
778                                     WLAN_REASON_DEAUTH_LEAVING, true);
779                 wdev_unlock(wdev);
780                 break;
781         case NL80211_IFTYPE_MESH_POINT:
782                 cfg80211_leave_mesh(rdev, dev);
783                 break;
784         case NL80211_IFTYPE_AP:
785         case NL80211_IFTYPE_P2P_GO:
786                 cfg80211_stop_ap(rdev, dev);
787                 break;
788         default:
789                 break;
790         }
791
792         wdev->beacon_interval = 0;
793 }
794
795 static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
796                                          unsigned long state, void *ptr)
797 {
798         struct net_device *dev = netdev_notifier_info_to_dev(ptr);
799         struct wireless_dev *wdev = dev->ieee80211_ptr;
800         struct cfg80211_registered_device *rdev;
801         int ret;
802
803         if (!wdev)
804                 return NOTIFY_DONE;
805
806         rdev = wiphy_to_dev(wdev->wiphy);
807
808         WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
809
810         switch (state) {
811         case NETDEV_POST_INIT:
812                 SET_NETDEV_DEVTYPE(dev, &wiphy_type);
813                 break;
814         case NETDEV_REGISTER:
815                 /*
816                  * NB: cannot take rdev->mtx here because this may be
817                  * called within code protected by it when interfaces
818                  * are added with nl80211.
819                  */
820                 mutex_init(&wdev->mtx);
821                 INIT_LIST_HEAD(&wdev->event_list);
822                 spin_lock_init(&wdev->event_lock);
823                 INIT_LIST_HEAD(&wdev->mgmt_registrations);
824                 spin_lock_init(&wdev->mgmt_registrations_lock);
825
826                 wdev->identifier = ++rdev->wdev_id;
827                 list_add_rcu(&wdev->list, &rdev->wdev_list);
828                 rdev->devlist_generation++;
829                 /* can only change netns with wiphy */
830                 dev->features |= NETIF_F_NETNS_LOCAL;
831
832                 if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
833                                       "phy80211")) {
834                         pr_err("failed to add phy80211 symlink to netdev!\n");
835                 }
836                 wdev->netdev = dev;
837 #ifdef CONFIG_CFG80211_WEXT
838                 wdev->wext.default_key = -1;
839                 wdev->wext.default_mgmt_key = -1;
840                 wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
841 #endif
842
843                 if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
844                         wdev->ps = true;
845                 else
846                         wdev->ps = false;
847                 /* allow mac80211 to determine the timeout */
848                 wdev->ps_timeout = -1;
849
850                 netdev_set_default_ethtool_ops(dev, &cfg80211_ethtool_ops);
851
852                 if ((wdev->iftype == NL80211_IFTYPE_STATION ||
853                      wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
854                      wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
855                         dev->priv_flags |= IFF_DONT_BRIDGE;
856                 break;
857         case NETDEV_GOING_DOWN:
858                 cfg80211_leave(rdev, wdev);
859                 break;
860         case NETDEV_DOWN:
861                 cfg80211_update_iface_num(rdev, wdev->iftype, -1);
862                 if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
863                         if (WARN_ON(!rdev->scan_req->notified))
864                                 rdev->scan_req->aborted = true;
865                         ___cfg80211_scan_done(rdev, true);
866                 }
867
868                 if (WARN_ON(rdev->sched_scan_req &&
869                             rdev->sched_scan_req->dev == wdev->netdev)) {
870                         __cfg80211_stop_sched_scan(rdev, false);
871                 }
872
873                 rdev->opencount--;
874                 wake_up(&rdev->dev_wait);
875                 break;
876         case NETDEV_UP:
877                 cfg80211_update_iface_num(rdev, wdev->iftype, 1);
878                 wdev_lock(wdev);
879                 switch (wdev->iftype) {
880 #ifdef CONFIG_CFG80211_WEXT
881                 case NL80211_IFTYPE_ADHOC:
882                         cfg80211_ibss_wext_join(rdev, wdev);
883                         break;
884                 case NL80211_IFTYPE_STATION:
885                         cfg80211_mgd_wext_connect(rdev, wdev);
886                         break;
887 #endif
888 #ifdef CONFIG_MAC80211_MESH
889                 case NL80211_IFTYPE_MESH_POINT:
890                         {
891                                 /* backward compat code... */
892                                 struct mesh_setup setup;
893                                 memcpy(&setup, &default_mesh_setup,
894                                                 sizeof(setup));
895                                  /* back compat only needed for mesh_id */
896                                 setup.mesh_id = wdev->ssid;
897                                 setup.mesh_id_len = wdev->mesh_id_up_len;
898                                 if (wdev->mesh_id_up_len)
899                                         __cfg80211_join_mesh(rdev, dev,
900                                                         &setup,
901                                                         &default_mesh_config);
902                                 break;
903                         }
904 #endif
905                 default:
906                         break;
907                 }
908                 wdev_unlock(wdev);
909                 rdev->opencount++;
910
911                 /*
912                  * Configure power management to the driver here so that its
913                  * correctly set also after interface type changes etc.
914                  */
915                 if ((wdev->iftype == NL80211_IFTYPE_STATION ||
916                      wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
917                     rdev->ops->set_power_mgmt)
918                         if (rdev_set_power_mgmt(rdev, dev, wdev->ps,
919                                                 wdev->ps_timeout)) {
920                                 /* assume this means it's off */
921                                 wdev->ps = false;
922                         }
923                 break;
924         case NETDEV_UNREGISTER:
925                 /*
926                  * It is possible to get NETDEV_UNREGISTER
927                  * multiple times. To detect that, check
928                  * that the interface is still on the list
929                  * of registered interfaces, and only then
930                  * remove and clean it up.
931                  */
932                 if (!list_empty(&wdev->list)) {
933                         sysfs_remove_link(&dev->dev.kobj, "phy80211");
934                         list_del_rcu(&wdev->list);
935                         rdev->devlist_generation++;
936                         cfg80211_mlme_purge_registrations(wdev);
937 #ifdef CONFIG_CFG80211_WEXT
938                         kfree(wdev->wext.keys);
939 #endif
940                 }
941                 /*
942                  * synchronise (so that we won't find this netdev
943                  * from other code any more) and then clear the list
944                  * head so that the above code can safely check for
945                  * !list_empty() to avoid double-cleanup.
946                  */
947                 synchronize_rcu();
948                 INIT_LIST_HEAD(&wdev->list);
949                 /*
950                  * Ensure that all events have been processed and
951                  * freed.
952                  */
953                 cfg80211_process_wdev_events(wdev);
954
955                 if (WARN_ON(wdev->current_bss)) {
956                         cfg80211_unhold_bss(wdev->current_bss);
957                         cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
958                         wdev->current_bss = NULL;
959                 }
960                 break;
961         case NETDEV_PRE_UP:
962                 if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
963                         return notifier_from_errno(-EOPNOTSUPP);
964                 ret = cfg80211_can_add_interface(rdev, wdev->iftype);
965                 if (ret)
966                         return notifier_from_errno(ret);
967                 break;
968         }
969
970         return NOTIFY_DONE;
971 }
972
973 static struct notifier_block cfg80211_netdev_notifier = {
974         .notifier_call = cfg80211_netdev_notifier_call,
975 };
976
977 static void __net_exit cfg80211_pernet_exit(struct net *net)
978 {
979         struct cfg80211_registered_device *rdev;
980
981         rtnl_lock();
982         list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
983                 if (net_eq(wiphy_net(&rdev->wiphy), net))
984                         WARN_ON(cfg80211_switch_netns(rdev, &init_net));
985         }
986         rtnl_unlock();
987 }
988
989 static struct pernet_operations cfg80211_pernet_ops = {
990         .exit = cfg80211_pernet_exit,
991 };
992
993 static int __init cfg80211_init(void)
994 {
995         int err;
996
997         err = register_pernet_device(&cfg80211_pernet_ops);
998         if (err)
999                 goto out_fail_pernet;
1000
1001         err = wiphy_sysfs_init();
1002         if (err)
1003                 goto out_fail_sysfs;
1004
1005         err = register_netdevice_notifier(&cfg80211_netdev_notifier);
1006         if (err)
1007                 goto out_fail_notifier;
1008
1009         err = nl80211_init();
1010         if (err)
1011                 goto out_fail_nl80211;
1012
1013         ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
1014
1015         err = regulatory_init();
1016         if (err)
1017                 goto out_fail_reg;
1018
1019         cfg80211_wq = create_singlethread_workqueue("cfg80211");
1020         if (!cfg80211_wq) {
1021                 err = -ENOMEM;
1022                 goto out_fail_wq;
1023         }
1024
1025         return 0;
1026
1027 out_fail_wq:
1028         regulatory_exit();
1029 out_fail_reg:
1030         debugfs_remove(ieee80211_debugfs_dir);
1031 out_fail_nl80211:
1032         unregister_netdevice_notifier(&cfg80211_netdev_notifier);
1033 out_fail_notifier:
1034         wiphy_sysfs_exit();
1035 out_fail_sysfs:
1036         unregister_pernet_device(&cfg80211_pernet_ops);
1037 out_fail_pernet:
1038         return err;
1039 }
1040 subsys_initcall(cfg80211_init);
1041
1042 static void __exit cfg80211_exit(void)
1043 {
1044         debugfs_remove(ieee80211_debugfs_dir);
1045         nl80211_exit();
1046         unregister_netdevice_notifier(&cfg80211_netdev_notifier);
1047         wiphy_sysfs_exit();
1048         regulatory_exit();
1049         unregister_pernet_device(&cfg80211_pernet_ops);
1050         destroy_workqueue(cfg80211_wq);
1051 }
1052 module_exit(cfg80211_exit);