]> Pileus Git - ~andy/linux/blob - include/scsi/scsi_device.h
ath9k: Remove redundant variable assignment
[~andy/linux] / include / scsi / scsi_device.h
1 #ifndef _SCSI_SCSI_DEVICE_H
2 #define _SCSI_SCSI_DEVICE_H
3
4 #include <linux/list.h>
5 #include <linux/spinlock.h>
6 #include <linux/workqueue.h>
7 #include <linux/blkdev.h>
8 #include <scsi/scsi.h>
9 #include <linux/atomic.h>
10
11 struct device;
12 struct request_queue;
13 struct scsi_cmnd;
14 struct scsi_lun;
15 struct scsi_sense_hdr;
16
17 struct scsi_mode_data {
18         __u32   length;
19         __u16   block_descriptor_length;
20         __u8    medium_type;
21         __u8    device_specific;
22         __u8    header_length;
23         __u8    longlba:1;
24 };
25
26 /*
27  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
28  * (for the ascii descriptions) and the state model enforcer:
29  * scsi_lib:scsi_device_set_state().
30  */
31 enum scsi_device_state {
32         SDEV_CREATED = 1,       /* device created but not added to sysfs
33                                  * Only internal commands allowed (for inq) */
34         SDEV_RUNNING,           /* device properly configured
35                                  * All commands allowed */
36         SDEV_CANCEL,            /* beginning to delete device
37                                  * Only error handler commands allowed */
38         SDEV_DEL,               /* device deleted 
39                                  * no commands allowed */
40         SDEV_QUIESCE,           /* Device quiescent.  No block commands
41                                  * will be accepted, only specials (which
42                                  * originate in the mid-layer) */
43         SDEV_OFFLINE,           /* Device offlined (by error handling or
44                                  * user request */
45         SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
46         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
47                                  * scsi commands from user or midlayer
48                                  * should be issued to the scsi
49                                  * lld. */
50         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
51 };
52
53 enum scsi_device_event {
54         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
55
56         SDEV_EVT_LAST           = SDEV_EVT_MEDIA_CHANGE,
57         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
58 };
59
60 struct scsi_event {
61         enum scsi_device_event  evt_type;
62         struct list_head        node;
63
64         /* put union of data structures, for non-simple event types,
65          * here
66          */
67 };
68
69 struct scsi_device {
70         struct Scsi_Host *host;
71         struct request_queue *request_queue;
72
73         /* the next two are protected by the host->host_lock */
74         struct list_head    siblings;   /* list of all devices on this host */
75         struct list_head    same_target_siblings; /* just the devices sharing same target id */
76
77         /* this is now protected by the request_queue->queue_lock */
78         unsigned int device_busy;       /* commands actually active on
79                                          * low-level. protected by queue_lock. */
80         spinlock_t list_lock;
81         struct list_head cmd_list;      /* queue of in use SCSI Command structures */
82         struct list_head starved_entry;
83         struct scsi_cmnd *current_cmnd; /* currently active command */
84         unsigned short queue_depth;     /* How deep of a queue we want */
85         unsigned short max_queue_depth; /* max queue depth */
86         unsigned short last_queue_full_depth; /* These two are used by */
87         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
88         unsigned long last_queue_full_time;     /* last queue full time */
89         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
90 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
91
92         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
93
94         unsigned int id, lun, channel;
95
96         unsigned int manufacturer;      /* Manufacturer of device, for using 
97                                          * vendor-specific cmd's */
98         unsigned sector_size;   /* size in bytes */
99
100         void *hostdata;         /* available to low-level driver */
101         char type;
102         char scsi_level;
103         char inq_periph_qual;   /* PQ from INQUIRY data */      
104         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
105         unsigned char * inquiry;        /* INQUIRY response data */
106         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
107         const char * model;             /* ... after scan; point to static string */
108         const char * rev;               /* ... "nullnullnullnull" before scan */
109         unsigned char current_tag;      /* current tag */
110         struct scsi_target      *sdev_target;   /* used only for single_lun */
111
112         unsigned int    sdev_bflags; /* black/white flags as also found in
113                                  * scsi_devinfo.[hc]. For now used only to
114                                  * pass settings from slave_alloc to scsi
115                                  * core. */
116         unsigned writeable:1;
117         unsigned removable:1;
118         unsigned changed:1;     /* Data invalid due to media change */
119         unsigned busy:1;        /* Used to prevent races */
120         unsigned lockable:1;    /* Able to prevent media removal */
121         unsigned locked:1;      /* Media removal disabled */
122         unsigned borken:1;      /* Tell the Seagate driver to be 
123                                  * painfully slow on this device */
124         unsigned disconnect:1;  /* can disconnect */
125         unsigned soft_reset:1;  /* Uses soft reset option */
126         unsigned sdtr:1;        /* Device supports SDTR messages */
127         unsigned wdtr:1;        /* Device supports WDTR messages */
128         unsigned ppr:1;         /* Device supports PPR messages */
129         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
130         unsigned simple_tags:1; /* simple queue tag messages are enabled */
131         unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
132         unsigned was_reset:1;   /* There was a bus reset on the bus for 
133                                  * this device */
134         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
135                                      * because we did a bus reset. */
136         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
137         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
138         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
139         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
140         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
141         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
142         unsigned no_start_on_add:1;     /* do not issue start on add */
143         unsigned allow_restart:1; /* issue START_UNIT in error handler */
144         unsigned manage_start_stop:1;   /* Let HLD (sd) manage start/stop */
145         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
146         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
147         unsigned select_no_atn:1;
148         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
149         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
150         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
151         unsigned last_sector_bug:1;     /* do not use multisector accesses on
152                                            SD_LAST_BUGGY_SECTORS */
153         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
154         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
155         unsigned try_rc_10_first:1;     /* Try READ_CAPACACITY_10 first */
156         unsigned is_visible:1;  /* is the device visible in sysfs */
157         unsigned can_power_off:1; /* Device supports runtime power off */
158         unsigned wce_default_on:1;      /* Cache is ON by default */
159
160         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
161         struct list_head event_list;    /* asserted events */
162         struct work_struct event_work;
163
164         unsigned int device_blocked;    /* Device returned QUEUE_FULL. */
165
166         unsigned int max_device_blocked; /* what device_blocked counts down from  */
167 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
168
169         atomic_t iorequest_cnt;
170         atomic_t iodone_cnt;
171         atomic_t ioerr_cnt;
172
173         struct device           sdev_gendev,
174                                 sdev_dev;
175
176         struct execute_work     ew; /* used to get process context on put */
177         struct work_struct      requeue_work;
178
179         struct scsi_dh_data     *scsi_dh_data;
180         enum scsi_device_state sdev_state;
181         unsigned long           sdev_data[0];
182 } __attribute__((aligned(sizeof(unsigned long))));
183
184 struct scsi_dh_devlist {
185         char *vendor;
186         char *model;
187 };
188
189 typedef void (*activate_complete)(void *, int);
190 struct scsi_device_handler {
191         /* Used by the infrastructure */
192         struct list_head list; /* list of scsi_device_handlers */
193
194         /* Filled by the hardware handler */
195         struct module *module;
196         const char *name;
197         const struct scsi_dh_devlist *devlist;
198         int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
199         int (*attach)(struct scsi_device *);
200         void (*detach)(struct scsi_device *);
201         int (*activate)(struct scsi_device *, activate_complete, void *);
202         int (*prep_fn)(struct scsi_device *, struct request *);
203         int (*set_params)(struct scsi_device *, const char *);
204         bool (*match)(struct scsi_device *);
205 };
206
207 struct scsi_dh_data {
208         struct scsi_device_handler *scsi_dh;
209         struct scsi_device *sdev;
210         struct kref kref;
211         char buf[0];
212 };
213
214 #define to_scsi_device(d)       \
215         container_of(d, struct scsi_device, sdev_gendev)
216 #define class_to_sdev(d)        \
217         container_of(d, struct scsi_device, sdev_dev)
218 #define transport_class_to_sdev(class_dev) \
219         to_scsi_device(class_dev->parent)
220
221 #define sdev_printk(prefix, sdev, fmt, a...)    \
222         dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
223
224 #define scmd_printk(prefix, scmd, fmt, a...)                            \
225         (scmd)->request->rq_disk ?                                      \
226         sdev_printk(prefix, (scmd)->device, "[%s] " fmt,                \
227                     (scmd)->request->rq_disk->disk_name, ##a) :         \
228         sdev_printk(prefix, (scmd)->device, fmt, ##a)
229
230 enum scsi_target_state {
231         STARGET_CREATED = 1,
232         STARGET_RUNNING,
233         STARGET_DEL,
234 };
235
236 /*
237  * scsi_target: representation of a scsi target, for now, this is only
238  * used for single_lun devices. If no one has active IO to the target,
239  * starget_sdev_user is NULL, else it points to the active sdev.
240  */
241 struct scsi_target {
242         struct scsi_device      *starget_sdev_user;
243         struct list_head        siblings;
244         struct list_head        devices;
245         struct device           dev;
246         unsigned int            reap_ref; /* protected by the host lock */
247         unsigned int            channel;
248         unsigned int            id; /* target id ... replace
249                                      * scsi_device.id eventually */
250         unsigned int            create:1; /* signal that it needs to be added */
251         unsigned int            single_lun:1;   /* Indicates we should only
252                                                  * allow I/O to one of the luns
253                                                  * for the device at a time. */
254         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
255                                                  * means no lun present. */
256         unsigned int            no_report_luns:1;       /* Don't use
257                                                  * REPORT LUNS for scanning. */
258         /* commands actually active on LLD. protected by host lock. */
259         unsigned int            target_busy;
260         /*
261          * LLDs should set this in the slave_alloc host template callout.
262          * If set to zero then there is not limit.
263          */
264         unsigned int            can_queue;
265         unsigned int            target_blocked;
266         unsigned int            max_target_blocked;
267 #define SCSI_DEFAULT_TARGET_BLOCKED     3
268
269         char                    scsi_level;
270         struct execute_work     ew;
271         enum scsi_target_state  state;
272         void                    *hostdata; /* available to low-level driver */
273         unsigned long           starget_data[0]; /* for the transport */
274         /* starget_data must be the last element!!!! */
275 } __attribute__((aligned(sizeof(unsigned long))));
276
277 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
278 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
279 {
280         return to_scsi_target(sdev->sdev_gendev.parent);
281 }
282 #define transport_class_to_starget(class_dev) \
283         to_scsi_target(class_dev->parent)
284
285 #define starget_printk(prefix, starget, fmt, a...)      \
286         dev_printk(prefix, &(starget)->dev, fmt, ##a)
287
288 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
289                 uint, uint, uint, void *hostdata);
290 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
291                            uint target, uint lun);
292 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
293 extern void scsi_remove_device(struct scsi_device *);
294 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
295
296 extern int scsi_device_get(struct scsi_device *);
297 extern void scsi_device_put(struct scsi_device *);
298 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
299                                               uint, uint, uint);
300 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
301                                                 uint, uint, uint);
302 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
303                                                         uint);
304 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
305                                                           uint);
306 extern void starget_for_each_device(struct scsi_target *, void *,
307                      void (*fn)(struct scsi_device *, void *));
308 extern void __starget_for_each_device(struct scsi_target *, void *,
309                                       void (*fn)(struct scsi_device *,
310                                                  void *));
311
312 /* only exposed to implement shost_for_each_device */
313 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
314                                                   struct scsi_device *);
315
316 /**
317  * shost_for_each_device - iterate over all devices of a host
318  * @sdev: the &struct scsi_device to use as a cursor
319  * @shost: the &struct scsi_host to iterate over
320  *
321  * Iterator that returns each device attached to @shost.  This loop
322  * takes a reference on each device and releases it at the end.  If
323  * you break out of the loop, you must call scsi_device_put(sdev).
324  */
325 #define shost_for_each_device(sdev, shost) \
326         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
327              (sdev); \
328              (sdev) = __scsi_iterate_devices((shost), (sdev)))
329
330 /**
331  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
332  * @sdev: the &struct scsi_device to use as a cursor
333  * @shost: the &struct scsi_host to iterate over
334  *
335  * Iterator that returns each device attached to @shost.  It does _not_
336  * take a reference on the scsi_device, so the whole loop must be
337  * protected by shost->host_lock.
338  *
339  * Note: The only reason to use this is because you need to access the
340  * device list in interrupt context.  Otherwise you really want to use
341  * shost_for_each_device instead.
342  */
343 #define __shost_for_each_device(sdev, shost) \
344         list_for_each_entry((sdev), &((shost)->__devices), siblings)
345
346 extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
347 extern int scsi_track_queue_full(struct scsi_device *, int);
348
349 extern int scsi_set_medium_removal(struct scsi_device *, char);
350
351 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
352                            unsigned char *buffer, int len, int timeout,
353                            int retries, struct scsi_mode_data *data,
354                            struct scsi_sense_hdr *);
355 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
356                             int modepage, unsigned char *buffer, int len,
357                             int timeout, int retries,
358                             struct scsi_mode_data *data,
359                             struct scsi_sense_hdr *);
360 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
361                                 int retries, struct scsi_sense_hdr *sshdr);
362 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
363                              int buf_len);
364 extern int scsi_device_set_state(struct scsi_device *sdev,
365                                  enum scsi_device_state state);
366 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
367                                           gfp_t gfpflags);
368 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
369 extern void sdev_evt_send_simple(struct scsi_device *sdev,
370                           enum scsi_device_event evt_type, gfp_t gfpflags);
371 extern int scsi_device_quiesce(struct scsi_device *sdev);
372 extern void scsi_device_resume(struct scsi_device *sdev);
373 extern void scsi_target_quiesce(struct scsi_target *);
374 extern void scsi_target_resume(struct scsi_target *);
375 extern void scsi_scan_target(struct device *parent, unsigned int channel,
376                              unsigned int id, unsigned int lun, int rescan);
377 extern void scsi_target_reap(struct scsi_target *);
378 extern void scsi_target_block(struct device *);
379 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
380 extern void scsi_remove_target(struct device *);
381 extern void int_to_scsilun(unsigned int, struct scsi_lun *);
382 extern int scsilun_to_int(struct scsi_lun *);
383 extern const char *scsi_device_state_name(enum scsi_device_state);
384 extern int scsi_is_sdev_device(const struct device *);
385 extern int scsi_is_target_device(const struct device *);
386 extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
387                         int data_direction, void *buffer, unsigned bufflen,
388                         unsigned char *sense, int timeout, int retries,
389                         int flag, int *resid);
390 extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
391                             int data_direction, void *buffer, unsigned bufflen,
392                             struct scsi_sense_hdr *, int timeout, int retries,
393                             int *resid);
394
395 #ifdef CONFIG_PM_RUNTIME
396 extern int scsi_autopm_get_device(struct scsi_device *);
397 extern void scsi_autopm_put_device(struct scsi_device *);
398 #else
399 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
400 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
401 #endif /* CONFIG_PM_RUNTIME */
402
403 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
404 {
405         return device_reprobe(&sdev->sdev_gendev);
406 }
407
408 static inline unsigned int sdev_channel(struct scsi_device *sdev)
409 {
410         return sdev->channel;
411 }
412
413 static inline unsigned int sdev_id(struct scsi_device *sdev)
414 {
415         return sdev->id;
416 }
417
418 #define scmd_id(scmd) sdev_id((scmd)->device)
419 #define scmd_channel(scmd) sdev_channel((scmd)->device)
420
421 /*
422  * checks for positions of the SCSI state machine
423  */
424 static inline int scsi_device_online(struct scsi_device *sdev)
425 {
426         return (sdev->sdev_state != SDEV_OFFLINE &&
427                 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
428                 sdev->sdev_state != SDEV_DEL);
429 }
430 static inline int scsi_device_blocked(struct scsi_device *sdev)
431 {
432         return sdev->sdev_state == SDEV_BLOCK ||
433                 sdev->sdev_state == SDEV_CREATED_BLOCK;
434 }
435 static inline int scsi_device_created(struct scsi_device *sdev)
436 {
437         return sdev->sdev_state == SDEV_CREATED ||
438                 sdev->sdev_state == SDEV_CREATED_BLOCK;
439 }
440
441 /* accessor functions for the SCSI parameters */
442 static inline int scsi_device_sync(struct scsi_device *sdev)
443 {
444         return sdev->sdtr;
445 }
446 static inline int scsi_device_wide(struct scsi_device *sdev)
447 {
448         return sdev->wdtr;
449 }
450 static inline int scsi_device_dt(struct scsi_device *sdev)
451 {
452         return sdev->ppr;
453 }
454 static inline int scsi_device_dt_only(struct scsi_device *sdev)
455 {
456         if (sdev->inquiry_len < 57)
457                 return 0;
458         return (sdev->inquiry[56] & 0x0c) == 0x04;
459 }
460 static inline int scsi_device_ius(struct scsi_device *sdev)
461 {
462         if (sdev->inquiry_len < 57)
463                 return 0;
464         return sdev->inquiry[56] & 0x01;
465 }
466 static inline int scsi_device_qas(struct scsi_device *sdev)
467 {
468         if (sdev->inquiry_len < 57)
469                 return 0;
470         return sdev->inquiry[56] & 0x02;
471 }
472 static inline int scsi_device_enclosure(struct scsi_device *sdev)
473 {
474         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
475 }
476
477 static inline int scsi_device_protection(struct scsi_device *sdev)
478 {
479         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
480 }
481
482 static inline int scsi_device_tpgs(struct scsi_device *sdev)
483 {
484         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
485 }
486
487 #define MODULE_ALIAS_SCSI_DEVICE(type) \
488         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
489 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
490
491 #endif /* _SCSI_SCSI_DEVICE_H */