Pileus Git - ~andy/git/blob - git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[start|bad|good|skip|next|reset|visualize|replay|log|run]'
   4 LONG_USAGE='git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
   5         reset bisect state and start bisection.
   6 git bisect bad [<rev>]
   7         mark <rev> a known-bad revision.
   8 git bisect good [<rev>...]
   9         mark <rev>... known-good revisions.
  10 git bisect skip [<rev>...]
  11         mark <rev>... untestable revisions.
  12 git bisect next
  13         find next bisection to test and check it out.
  14 git bisect reset [<branch>]
  15         finish bisection search and go back to branch.
  16 git bisect visualize
  17         show bisect status in gitk.
  18 git bisect replay <logfile>
  19         replay bisection log.
  20 git bisect log
  21         show bisect log.
  22 git bisect run <cmd>...
  23         use <cmd>... to automatically bisect.'
  24
  25 . git-sh-setup
  26 require_work_tree
  27
  28 sq() {
  29         @@PERL@@ -e '
  30                 for (@ARGV) {
  31                         s/'\''/'\'\\\\\'\''/g;
  32                         print " '\''$_'\''";
  33                 }
  34                 print "\n";
  35         ' "$@"
  36 }
  37
  38 bisect_autostart() {
  39         test -f "$GIT_DIR/BISECT_NAMES" || {
  40                 echo >&2 'You need to start by "git bisect start"'
  41                 if test -t 0
  42                 then
  43                         echo >&2 -n 'Do you want me to do it for you [Y/n]? '
  44                         read yesno
  45                         case "$yesno" in
  46                         [Nn]*)
  47                                 exit ;;
  48                         esac
  49                         bisect_start
  50                 else
  51                         exit 1
  52                 fi
  53         }
  54 }
  55
  56 bisect_start() {
  57         #
  58         # Verify HEAD. If we were bisecting before this, reset to the
  59         # top-of-line master first!
  60         #
  61         head=$(GIT_DIR="$GIT_DIR" git symbolic-ref HEAD) ||
  62         die "Bad HEAD - I need a symbolic ref"
  63         case "$head" in
  64         refs/heads/bisect)
  65                 if [ -s "$GIT_DIR/head-name" ]; then
  66                     branch=`cat "$GIT_DIR/head-name"`
  67                 else
  68                     branch=master
  69                 fi
  70                 git checkout $branch || exit
  71                 ;;
  72         refs/heads/*)
  73                 [ -s "$GIT_DIR/head-name" ] && die "won't bisect on seeked tree"
  74                 echo "${head#refs/heads/}" >"$GIT_DIR/head-name"
  75                 ;;
  76         *)
  77                 die "Bad HEAD - strange symbolic ref"
  78                 ;;
  79         esac
  80
  81         #
  82         # Get rid of any old bisect state
  83         #
  84         bisect_clean_state
  85
  86         #
  87         # Check for one bad and then some good revisions.
  88         #
  89         has_double_dash=0
  90         for arg; do
  91             case "$arg" in --) has_double_dash=1; break ;; esac
  92         done
  93         orig_args=$(sq "$@")
  94         bad_seen=0
  95         while [ $# -gt 0 ]; do
  96             arg="$1"
  97             case "$arg" in
  98             --)
  99                 shift
 100                 break
 101                 ;;
 102             *)
 103                 rev=$(git rev-parse --verify "$arg^{commit}" 2>/dev/null) || {
 104                     test $has_double_dash -eq 1 &&
 105                         die "'$arg' does not appear to be a valid revision"
 106                     break
 107                 }
 108                 case $bad_seen in
 109                 0) state='bad' ; bad_seen=1 ;;
 110                 *) state='good' ;;
 111                 esac
 112                 bisect_write "$state" "$rev" 'nolog'
 113                 shift
 114                 ;;
 115             esac
 116         done
 117
 118         sq "$@" >"$GIT_DIR/BISECT_NAMES"
 119         echo "git-bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG"
 120         bisect_auto_next
 121 }
 122
 123 bisect_write() {
 124         state="$1"
 125         rev="$2"
 126         nolog="$3"
 127         case "$state" in
 128                 bad)            tag="$state" ;;
 129                 good|skip)      tag="$state"-"$rev" ;;
 130                 *)              die "Bad bisect_write argument: $state" ;;
 131         esac
 132         git update-ref "refs/bisect/$tag" "$rev"
 133         echo "# $state: "$(git show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
 134         test -z "$nolog" && echo "git-bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
 135 }
 136
 137 bisect_state() {
 138         bisect_autostart
 139         state=$1
 140         case "$#,$state" in
 141         0,*)
 142                 die "Please call 'bisect_state' with at least one argument." ;;
 143         1,bad|1,good|1,skip)
 144                 rev=$(git rev-parse --verify HEAD) ||
 145                         die "Bad rev input: HEAD"
 146                 bisect_write "$state" "$rev" ;;
 147         2,bad)
 148                 rev=$(git rev-parse --verify "$2^{commit}") ||
 149                         die "Bad rev input: $2"
 150                 bisect_write "$state" "$rev" ;;
 151         *,good|*,skip)
 152                 shift
 153                 revs=$(git rev-parse --revs-only --no-flags "$@") &&
 154                         test '' != "$revs" || die "Bad rev input: $@"
 155                 for rev in $revs
 156                 do
 157                         rev=$(git rev-parse --verify "$rev^{commit}") ||
 158                                 die "Bad rev commit: $rev^{commit}"
 159                         bisect_write "$state" "$rev"
 160                 done ;;
 161         *)
 162                 usage ;;
 163         esac
 164         bisect_auto_next
 165 }
 166
 167 bisect_next_check() {
 168         missing_good= missing_bad=
 169         git show-ref -q --verify refs/bisect/bad || missing_bad=t
 170         test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t
 171
 172         case "$missing_good,$missing_bad,$1" in
 173         ,,*)
 174                 : have both good and bad - ok
 175                 ;;
 176         *,)
 177                 # do not have both but not asked to fail - just report.
 178                 false
 179                 ;;
 180         t,,good)
 181                 # have bad but not good.  we could bisect although
 182                 # this is less optimum.
 183                 echo >&2 'Warning: bisecting only with a bad commit.'
 184                 if test -t 0
 185                 then
 186                         printf >&2 'Are you sure [Y/n]? '
 187                         case "$(read yesno)" in [Nn]*) exit 1 ;; esac
 188                 fi
 189                 : bisect without good...
 190                 ;;
 191         *)
 192                 THEN=''
 193                 test -f "$GIT_DIR/BISECT_NAMES" || {
 194                         echo >&2 'You need to start by "git bisect start".'
 195                         THEN='then '
 196                 }
 197                 echo >&2 'You '$THEN'need to give me at least one good' \
 198                         'and one bad revisions.'
 199                 echo >&2 '(You can use "git bisect bad" and' \
 200                         '"git bisect good" for that.)'
 201                 exit 1 ;;
 202         esac
 203 }
 204
 205 bisect_auto_next() {
 206         bisect_next_check && bisect_next || :
 207 }
 208
 209 filter_skipped() {
 210         _eval="$1"
 211         _skip="$2"
 212
 213         if [ -z "$_skip" ]; then
 214                 eval $_eval
 215                 return
 216         fi
 217
 218         # Let's parse the output of:
 219         # "git rev-list --bisect-vars --bisect-all ..."
 220         eval $_eval | while read hash line
 221         do
 222                 case "$VARS,$FOUND,$TRIED,$hash" in
 223                         # We display some vars.
 224                         1,*,*,*) echo "$hash $line" ;;
 225
 226                         # Split line.
 227                         ,*,*,---*) ;;
 228
 229                         # We had nothing to search.
 230                         ,,,bisect_rev*)
 231                                 echo "bisect_rev="
 232                                 VARS=1
 233                                 ;;
 234
 235                         # We did not find a good bisect rev.
 236                         # This should happen only if the "bad"
 237                         # commit is also a "skip" commit.
 238                         ,,*,bisect_rev*)
 239                                 echo "bisect_rev=$TRIED"
 240                                 VARS=1
 241                                 ;;
 242
 243                         # We are searching.
 244                         ,,*,*)
 245                                 TRIED="${TRIED:+$TRIED|}$hash"
 246                                 case "$_skip" in
 247                                 *$hash*) ;;
 248                                 *)
 249                                         echo "bisect_rev=$hash"
 250                                         echo "bisect_tried=\"$TRIED\""
 251                                         FOUND=1
 252                                         ;;
 253                                 esac
 254                                 ;;
 255
 256                         # We have already found a rev to be tested.
 257                         ,1,*,bisect_rev*) VARS=1 ;;
 258                         ,1,*,*) ;;
 259
 260                         # ???
 261                         *) die "filter_skipped error " \
 262                             "VARS: '$VARS' " \
 263                             "FOUND: '$FOUND' " \
 264                             "TRIED: '$TRIED' " \
 265                             "hash: '$hash' " \
 266                             "line: '$line'"
 267                         ;;
 268                 esac
 269         done
 270 }
 271
 272 exit_if_skipped_commits () {
 273         _tried=$1
 274         if expr "$_tried" : ".*[|].*" > /dev/null ; then
 275                 echo "There are only 'skip'ped commit left to test."
 276                 echo "The first bad commit could be any of:"
 277                 echo "$_tried" | tr '[|]' '[\012]'
 278                 echo "We cannot bisect more!"
 279                 exit 2
 280         fi
 281 }
 282
 283 bisect_next() {
 284         case "$#" in 0) ;; *) usage ;; esac
 285         bisect_autostart
 286         bisect_next_check good
 287
 288         skip=$(git for-each-ref --format='%(objectname)' \
 289                 "refs/bisect/skip-*" | tr '[\012]' ' ') || exit
 290
 291         BISECT_OPT=''
 292         test -n "$skip" && BISECT_OPT='--bisect-all'
 293
 294         bad=$(git rev-parse --verify refs/bisect/bad) &&
 295         good=$(git for-each-ref --format='^%(objectname)' \
 296                 "refs/bisect/good-*" | tr '[\012]' ' ') &&
 297         eval="git rev-list --bisect-vars $BISECT_OPT $good $bad --" &&
 298         eval="$eval $(cat "$GIT_DIR/BISECT_NAMES")" &&
 299         eval=$(filter_skipped "$eval" "$skip") &&
 300         eval "$eval" || exit
 301
 302         if [ -z "$bisect_rev" ]; then
 303                 echo "$bad was both good and bad"
 304                 exit 1
 305         fi
 306         if [ "$bisect_rev" = "$bad" ]; then
 307                 exit_if_skipped_commits "$bisect_tried"
 308                 echo "$bisect_rev is first bad commit"
 309                 git diff-tree --pretty $bisect_rev
 310                 exit 0
 311         fi
 312
 313         # We should exit here only if the "bad"
 314         # commit is also a "skip" commit (see above).
 315         exit_if_skipped_commits "$bisect_rev"
 316
 317         echo "Bisecting: $bisect_nr revisions left to test after this"
 318         git branch -f new-bisect "$bisect_rev"
 319         git checkout -q new-bisect || exit
 320         git branch -M new-bisect bisect
 321         git show-branch "$bisect_rev"
 322 }
 323
 324 bisect_visualize() {
 325         bisect_next_check fail
 326         not=$(git for-each-ref --format='%(refname)' "refs/bisect/good-*")
 327         eval gitk refs/bisect/bad --not $not -- $(cat "$GIT_DIR/BISECT_NAMES")
 328 }
 329
 330 bisect_reset() {
 331         case "$#" in
 332         0) if [ -s "$GIT_DIR/head-name" ]; then
 333                branch=`cat "$GIT_DIR/head-name"`
 334            else
 335                branch=master
 336            fi ;;
 337         1) git show-ref --verify --quiet -- "refs/heads/$1" ||
 338                die "$1 does not seem to be a valid branch"
 339            branch="$1" ;;
 340         *)
 341             usage ;;
 342         esac
 343         if git checkout "$branch"; then
 344                 rm -f "$GIT_DIR/head-name"
 345                 bisect_clean_state
 346         fi
 347 }
 348
 349 bisect_clean_state() {
 350         # There may be some refs packed during bisection.
 351         git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* refs/heads/bisect |
 352         while read ref hash
 353         do
 354                 git update-ref -d $ref $hash
 355         done
 356         rm -f "$GIT_DIR/BISECT_LOG"
 357         rm -f "$GIT_DIR/BISECT_NAMES"
 358         rm -f "$GIT_DIR/BISECT_RUN"
 359 }
 360
 361 bisect_replay () {
 362         test -r "$1" || die "cannot read $1 for replaying"
 363         bisect_reset
 364         while read bisect command rev
 365         do
 366                 test "$bisect" = "git-bisect" || continue
 367                 case "$command" in
 368                 start)
 369                         cmd="bisect_start $rev"
 370                         eval "$cmd" ;;
 371                 good|bad|skip)
 372                         bisect_write "$command" "$rev" ;;
 373                 *)
 374                         die "?? what are you talking about?" ;;
 375                 esac
 376         done <"$1"
 377         bisect_auto_next
 378 }
 379
 380 bisect_run () {
 381     bisect_next_check fail
 382
 383     while true
 384     do
 385       echo "running $@"
 386       "$@"
 387       res=$?
 388
 389       # Check for really bad run error.
 390       if [ $res -lt 0 -o $res -ge 128 ]; then
 391           echo >&2 "bisect run failed:"
 392           echo >&2 "exit code $res from '$@' is < 0 or >= 128"
 393           exit $res
 394       fi
 395
 396       # Find current state depending on run success or failure.
 397       # A special exit code of 125 means cannot test.
 398       if [ $res -eq 125 ]; then
 399           state='skip'
 400       elif [ $res -gt 0 ]; then
 401           state='bad'
 402       else
 403           state='good'
 404       fi
 405
 406       # We have to use a subshell because "bisect_state" can exit.
 407       ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
 408       res=$?
 409
 410       cat "$GIT_DIR/BISECT_RUN"
 411
 412       if grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
 413                 > /dev/null; then
 414           echo >&2 "bisect run cannot continue any more"
 415           exit $res
 416       fi
 417
 418       if [ $res -ne 0 ]; then
 419           echo >&2 "bisect run failed:"
 420           echo >&2 "'bisect_state $state' exited with error code $res"
 421           exit $res
 422       fi
 423
 424       if grep "is first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
 425           echo "bisect run success"
 426           exit 0;
 427       fi
 428
 429     done
 430 }
 431
 432
 433 case "$#" in
 434 0)
 435     usage ;;
 436 *)
 437     cmd="$1"
 438     shift
 439     case "$cmd" in
 440     start)
 441         bisect_start "$@" ;;
 442     bad|good|skip)
 443         bisect_state "$cmd" "$@" ;;
 444     next)
 445         # Not sure we want "next" at the UI level anymore.
 446         bisect_next "$@" ;;
 447     visualize)
 448         bisect_visualize "$@" ;;
 449     reset)
 450         bisect_reset "$@" ;;
 451     replay)
 452         bisect_replay "$@" ;;
 453     log)
 454         cat "$GIT_DIR/BISECT_LOG" ;;
 455     run)
 456         bisect_run "$@" ;;
 457     *)
 458         usage ;;
 459     esac
 460 esac