Pileus Git - ~andy/linux/blob - drivers/usb/serial/ssu100.c

   1 /*
   2  * usb-serial driver for Quatech SSU-100
   3  *
   4  * based on ftdi_sio.c and the original serqt_usb.c from Quatech
   5  *
   6  */
   7
   8 #include <linux/errno.h>
   9 #include <linux/init.h>
  10 #include <linux/slab.h>
  11 #include <linux/tty.h>
  12 #include <linux/tty_driver.h>
  13 #include <linux/tty_flip.h>
  14 #include <linux/module.h>
  15 #include <linux/serial.h>
  16 #include <linux/usb.h>
  17 #include <linux/usb/serial.h>
  18 #include <linux/serial_reg.h>
  19 #include <linux/uaccess.h>
  20
  21 #define QT_OPEN_CLOSE_CHANNEL       0xca
  22 #define QT_SET_GET_DEVICE           0xc2
  23 #define QT_SET_GET_REGISTER         0xc0
  24 #define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
  25 #define QT_SET_ATF                  0xcd
  26 #define QT_GET_SET_UART             0xc1
  27 #define QT_TRANSFER_IN              0xc0
  28 #define QT_HW_FLOW_CONTROL_MASK     0xc5
  29 #define QT_SW_FLOW_CONTROL_MASK     0xc6
  30
  31 #define  SERIAL_MSR_MASK            0xf0
  32
  33 #define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
  34
  35 #define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
  36
  37 #define  MAX_BAUD_RATE              460800
  38
  39 #define ATC_DISABLED                0x00
  40 #define DUPMODE_BITS        0xc0
  41 #define RR_BITS             0x03
  42 #define LOOPMODE_BITS       0x41
  43 #define RS232_MODE          0x00
  44 #define RTSCTS_TO_CONNECTOR 0x40
  45 #define CLKS_X4             0x02
  46 #define FULLPWRBIT          0x00000080
  47 #define NEXT_BOARD_POWER_BIT        0x00000004
  48
  49 #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
  50
  51 #define USB_VENDOR_ID_QUATECH   0x061d  /* Quatech VID */
  52 #define QUATECH_SSU100  0xC020  /* SSU100 */
  53
  54 static const struct usb_device_id id_table[] = {
  55         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
  56         {}                      /* Terminating entry */
  57 };
  58 MODULE_DEVICE_TABLE(usb, id_table);
  59
  60 struct ssu100_port_private {
  61         spinlock_t status_lock;
  62         u8 shadowLSR;
  63         u8 shadowMSR;
  64 };
  65
  66 static inline int ssu100_control_msg(struct usb_device *dev,
  67                                      u8 request, u16 data, u16 index)
  68 {
  69         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
  70                                request, 0x40, data, index,
  71                                NULL, 0, 300);
  72 }
  73
  74 static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
  75 {
  76         u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
  77
  78         return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
  79 }
  80
  81
  82 static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
  83 {
  84         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
  85                                QT_SET_GET_DEVICE, 0xc0, 0, 0,
  86                                data, 3, 300);
  87 }
  88
  89 static inline int ssu100_getregister(struct usb_device *dev,
  90                                      unsigned short uart,
  91                                      unsigned short reg,
  92                                      u8 *data)
  93 {
  94         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
  95                                QT_SET_GET_REGISTER, 0xc0, reg,
  96                                uart, data, sizeof(*data), 300);
  97
  98 }
  99
 100
 101 static inline int ssu100_setregister(struct usb_device *dev,
 102                                      unsigned short uart,
 103                                      unsigned short reg,
 104                                      u16 data)
 105 {
 106         u16 value = (data << 8) | reg;
 107
 108         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 109                                QT_SET_GET_REGISTER, 0x40, value, uart,
 110                                NULL, 0, 300);
 111
 112 }
 113
 114 #define set_mctrl(dev, set)             update_mctrl((dev), (set), 0)
 115 #define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear))
 116
 117 /* these do not deal with device that have more than 1 port */
 118 static inline int update_mctrl(struct usb_device *dev, unsigned int set,
 119                                unsigned int clear)
 120 {
 121         unsigned urb_value;
 122         int result;
 123
 124         if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
 125                 dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__);
 126                 return 0;       /* no change */
 127         }
 128
 129         clear &= ~set;  /* 'set' takes precedence over 'clear' */
 130         urb_value = 0;
 131         if (set & TIOCM_DTR)
 132                 urb_value |= UART_MCR_DTR;
 133         if (set & TIOCM_RTS)
 134                 urb_value |= UART_MCR_RTS;
 135
 136         result = ssu100_setregister(dev, 0, UART_MCR, urb_value);
 137         if (result < 0)
 138                 dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__);
 139
 140         return result;
 141 }
 142
 143 static int ssu100_initdevice(struct usb_device *dev)
 144 {
 145         u8 *data;
 146         int result = 0;
 147
 148         data = kzalloc(3, GFP_KERNEL);
 149         if (!data)
 150                 return -ENOMEM;
 151
 152         result = ssu100_getdevice(dev, data);
 153         if (result < 0) {
 154                 dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
 155                 goto out;
 156         }
 157
 158         data[1] &= ~FULLPWRBIT;
 159
 160         result = ssu100_setdevice(dev, data);
 161         if (result < 0) {
 162                 dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
 163                 goto out;
 164         }
 165
 166         result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
 167         if (result < 0) {
 168                 dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result);
 169                 goto out;
 170         }
 171
 172         result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
 173         if (result < 0) {
 174                 dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result);
 175                 goto out;
 176         }
 177
 178         result = ssu100_getdevice(dev, data);
 179         if (result < 0) {
 180                 dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
 181                 goto out;
 182         }
 183
 184         data[0] &= ~(RR_BITS | DUPMODE_BITS);
 185         data[0] |= CLKS_X4;
 186         data[1] &= ~(LOOPMODE_BITS);
 187         data[1] |= RS232_MODE;
 188
 189         result = ssu100_setdevice(dev, data);
 190         if (result < 0) {
 191                 dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
 192                 goto out;
 193         }
 194
 195 out:    kfree(data);
 196         return result;
 197
 198 }
 199
 200
 201 static void ssu100_set_termios(struct tty_struct *tty,
 202                                struct usb_serial_port *port,
 203                                struct ktermios *old_termios)
 204 {
 205         struct usb_device *dev = port->serial->dev;
 206         struct ktermios *termios = &tty->termios;
 207         u16 baud, divisor, remainder;
 208         unsigned int cflag = termios->c_cflag;
 209         u16 urb_value = 0; /* will hold the new flags */
 210         int result;
 211
 212         if (cflag & PARENB) {
 213                 if (cflag & PARODD)
 214                         urb_value |= UART_LCR_PARITY;
 215                 else
 216                         urb_value |= SERIAL_EVEN_PARITY;
 217         }
 218
 219         switch (cflag & CSIZE) {
 220         case CS5:
 221                 urb_value |= UART_LCR_WLEN5;
 222                 break;
 223         case CS6:
 224                 urb_value |= UART_LCR_WLEN6;
 225                 break;
 226         case CS7:
 227                 urb_value |= UART_LCR_WLEN7;
 228                 break;
 229         default:
 230         case CS8:
 231                 urb_value |= UART_LCR_WLEN8;
 232                 break;
 233         }
 234
 235         baud = tty_get_baud_rate(tty);
 236         if (!baud)
 237                 baud = 9600;
 238
 239         dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud);
 240
 241
 242         divisor = MAX_BAUD_RATE / baud;
 243         remainder = MAX_BAUD_RATE % baud;
 244         if (((remainder * 2) >= baud) && (baud != 110))
 245                 divisor++;
 246
 247         urb_value = urb_value << 8;
 248
 249         result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
 250         if (result < 0)
 251                 dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
 252
 253         if (cflag & CRTSCTS)
 254                 result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
 255                                             SERIAL_CRTSCTS, 0);
 256         else
 257                 result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
 258                                             0, 0);
 259         if (result < 0)
 260                 dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__);
 261
 262         if (I_IXOFF(tty) || I_IXON(tty)) {
 263                 u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
 264
 265                 result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
 266                                             x, 0);
 267         } else
 268                 result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
 269                                             0, 0);
 270
 271         if (result < 0)
 272                 dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__);
 273
 274 }
 275
 276
 277 static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 278 {
 279         struct usb_device *dev = port->serial->dev;
 280         struct ssu100_port_private *priv = usb_get_serial_port_data(port);
 281         u8 *data;
 282         int result;
 283         unsigned long flags;
 284
 285         data = kzalloc(2, GFP_KERNEL);
 286         if (!data)
 287                 return -ENOMEM;
 288
 289         result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 290                                  QT_OPEN_CLOSE_CHANNEL,
 291                                  QT_TRANSFER_IN, 0x01,
 292                                  0, data, 2, 300);
 293         if (result < 0) {
 294                 dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result);
 295                 kfree(data);
 296                 return result;
 297         }
 298
 299         spin_lock_irqsave(&priv->status_lock, flags);
 300         priv->shadowLSR = data[0];
 301         priv->shadowMSR = data[1];
 302         spin_unlock_irqrestore(&priv->status_lock, flags);
 303
 304         kfree(data);
 305
 306 /* set to 9600 */
 307         result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
 308         if (result < 0)
 309                 dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
 310
 311         if (tty)
 312                 ssu100_set_termios(tty, port, &tty->termios);
 313
 314         return usb_serial_generic_open(tty, port);
 315 }
 316
 317 static int get_serial_info(struct usb_serial_port *port,
 318                            struct serial_struct __user *retinfo)
 319 {
 320         struct serial_struct tmp;
 321
 322         if (!retinfo)
 323                 return -EFAULT;
 324
 325         memset(&tmp, 0, sizeof(tmp));
 326         tmp.line                = port->minor;
 327         tmp.port                = 0;
 328         tmp.irq                 = 0;
 329         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 330         tmp.xmit_fifo_size      = port->bulk_out_size;
 331         tmp.baud_base           = 9600;
 332         tmp.close_delay         = 5*HZ;
 333         tmp.closing_wait        = 30*HZ;
 334
 335         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 336                 return -EFAULT;
 337         return 0;
 338 }
 339
 340 static int ssu100_ioctl(struct tty_struct *tty,
 341                     unsigned int cmd, unsigned long arg)
 342 {
 343         struct usb_serial_port *port = tty->driver_data;
 344
 345         dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
 346
 347         switch (cmd) {
 348         case TIOCGSERIAL:
 349                 return get_serial_info(port,
 350                                        (struct serial_struct __user *) arg);
 351         default:
 352                 break;
 353         }
 354
 355         dev_dbg(&port->dev, "%s arg not supported\n", __func__);
 356
 357         return -ENOIOCTLCMD;
 358 }
 359
 360 static int ssu100_attach(struct usb_serial *serial)
 361 {
 362         return ssu100_initdevice(serial->dev);
 363 }
 364
 365 static int ssu100_port_probe(struct usb_serial_port *port)
 366 {
 367         struct ssu100_port_private *priv;
 368
 369         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 370         if (!priv)
 371                 return -ENOMEM;
 372
 373         spin_lock_init(&priv->status_lock);
 374
 375         usb_set_serial_port_data(port, priv);
 376
 377         return 0;
 378 }
 379
 380 static int ssu100_port_remove(struct usb_serial_port *port)
 381 {
 382         struct ssu100_port_private *priv;
 383
 384         priv = usb_get_serial_port_data(port);
 385         kfree(priv);
 386
 387         return 0;
 388 }
 389
 390 static int ssu100_tiocmget(struct tty_struct *tty)
 391 {
 392         struct usb_serial_port *port = tty->driver_data;
 393         struct usb_device *dev = port->serial->dev;
 394         u8 *d;
 395         int r;
 396
 397         d = kzalloc(2, GFP_KERNEL);
 398         if (!d)
 399                 return -ENOMEM;
 400
 401         r = ssu100_getregister(dev, 0, UART_MCR, d);
 402         if (r < 0)
 403                 goto mget_out;
 404
 405         r = ssu100_getregister(dev, 0, UART_MSR, d+1);
 406         if (r < 0)
 407                 goto mget_out;
 408
 409         r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
 410                 (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
 411                 (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
 412                 (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
 413                 (d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
 414                 (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
 415
 416 mget_out:
 417         kfree(d);
 418         return r;
 419 }
 420
 421 static int ssu100_tiocmset(struct tty_struct *tty,
 422                            unsigned int set, unsigned int clear)
 423 {
 424         struct usb_serial_port *port = tty->driver_data;
 425         struct usb_device *dev = port->serial->dev;
 426
 427         return update_mctrl(dev, set, clear);
 428 }
 429
 430 static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
 431 {
 432         struct usb_device *dev = port->serial->dev;
 433
 434         /* Disable flow control */
 435         if (!on) {
 436                 if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
 437                         dev_err(&port->dev, "error from flowcontrol urb\n");
 438         }
 439         /* drop RTS and DTR */
 440         if (on)
 441                 set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
 442         else
 443                 clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
 444 }
 445
 446 static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
 447 {
 448         struct ssu100_port_private *priv = usb_get_serial_port_data(port);
 449         unsigned long flags;
 450
 451         spin_lock_irqsave(&priv->status_lock, flags);
 452         priv->shadowMSR = msr;
 453         spin_unlock_irqrestore(&priv->status_lock, flags);
 454
 455         if (msr & UART_MSR_ANY_DELTA) {
 456                 /* update input line counters */
 457                 if (msr & UART_MSR_DCTS)
 458                         port->icount.cts++;
 459                 if (msr & UART_MSR_DDSR)
 460                         port->icount.dsr++;
 461                 if (msr & UART_MSR_DDCD)
 462                         port->icount.dcd++;
 463                 if (msr & UART_MSR_TERI)
 464                         port->icount.rng++;
 465                 wake_up_interruptible(&port->port.delta_msr_wait);
 466         }
 467 }
 468
 469 static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
 470                               char *tty_flag)
 471 {
 472         struct ssu100_port_private *priv = usb_get_serial_port_data(port);
 473         unsigned long flags;
 474
 475         spin_lock_irqsave(&priv->status_lock, flags);
 476         priv->shadowLSR = lsr;
 477         spin_unlock_irqrestore(&priv->status_lock, flags);
 478
 479         *tty_flag = TTY_NORMAL;
 480         if (lsr & UART_LSR_BRK_ERROR_BITS) {
 481                 /* we always want to update icount, but we only want to
 482                  * update tty_flag for one case */
 483                 if (lsr & UART_LSR_BI) {
 484                         port->icount.brk++;
 485                         *tty_flag = TTY_BREAK;
 486                         usb_serial_handle_break(port);
 487                 }
 488                 if (lsr & UART_LSR_PE) {
 489                         port->icount.parity++;
 490                         if (*tty_flag == TTY_NORMAL)
 491                                 *tty_flag = TTY_PARITY;
 492                 }
 493                 if (lsr & UART_LSR_FE) {
 494                         port->icount.frame++;
 495                         if (*tty_flag == TTY_NORMAL)
 496                                 *tty_flag = TTY_FRAME;
 497                 }
 498                 if (lsr & UART_LSR_OE){
 499                         port->icount.overrun++;
 500                         if (*tty_flag == TTY_NORMAL)
 501                                 *tty_flag = TTY_OVERRUN;
 502                 }
 503         }
 504
 505 }
 506
 507 static void ssu100_process_read_urb(struct urb *urb)
 508 {
 509         struct usb_serial_port *port = urb->context;
 510         char *packet = (char *)urb->transfer_buffer;
 511         char flag = TTY_NORMAL;
 512         u32 len = urb->actual_length;
 513         int i;
 514         char *ch;
 515
 516         if ((len >= 4) &&
 517             (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
 518             ((packet[2] == 0x00) || (packet[2] == 0x01))) {
 519                 if (packet[2] == 0x00) {
 520                         ssu100_update_lsr(port, packet[3], &flag);
 521                         if (flag == TTY_OVERRUN)
 522                                 tty_insert_flip_char(&port->port, 0,
 523                                                 TTY_OVERRUN);
 524                 }
 525                 if (packet[2] == 0x01)
 526                         ssu100_update_msr(port, packet[3]);
 527
 528                 len -= 4;
 529                 ch = packet + 4;
 530         } else
 531                 ch = packet;
 532
 533         if (!len)
 534                 return; /* status only */
 535
 536         if (port->port.console && port->sysrq) {
 537                 for (i = 0; i < len; i++, ch++) {
 538                         if (!usb_serial_handle_sysrq_char(port, *ch))
 539                                 tty_insert_flip_char(&port->port, *ch, flag);
 540                 }
 541         } else
 542                 tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len);
 543
 544         tty_flip_buffer_push(&port->port);
 545 }
 546
 547 static struct usb_serial_driver ssu100_device = {
 548         .driver = {
 549                 .owner = THIS_MODULE,
 550                 .name = "ssu100",
 551         },
 552         .description         = DRIVER_DESC,
 553         .id_table            = id_table,
 554         .num_ports           = 1,
 555         .open                = ssu100_open,
 556         .attach              = ssu100_attach,
 557         .port_probe          = ssu100_port_probe,
 558         .port_remove         = ssu100_port_remove,
 559         .dtr_rts             = ssu100_dtr_rts,
 560         .process_read_urb    = ssu100_process_read_urb,
 561         .tiocmget            = ssu100_tiocmget,
 562         .tiocmset            = ssu100_tiocmset,
 563         .tiocmiwait          = usb_serial_generic_tiocmiwait,
 564         .get_icount          = usb_serial_generic_get_icount,
 565         .ioctl               = ssu100_ioctl,
 566         .set_termios         = ssu100_set_termios,
 567 };
 568
 569 static struct usb_serial_driver * const serial_drivers[] = {
 570         &ssu100_device, NULL
 571 };
 572
 573 module_usb_serial_driver(serial_drivers, id_table);
 574
 575 MODULE_DESCRIPTION(DRIVER_DESC);
 576 MODULE_LICENSE("GPL");