Pileus Git - ~andy/linux/blob - drivers/usb/serial/digi_acceleport.c

   1 /*
   2 *  Digi AccelePort USB-4 and USB-2 Serial Converters
   3 *
   4 *  Copyright 2000 by Digi International
   5 *
   6 *  This program is free software; you can redistribute it and/or modify
   7 *  it under the terms of the GNU General Public License as published by
   8 *  the Free Software Foundation; either version 2 of the License, or
   9 *  (at your option) any later version.
  10 *
  11 *  Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
  12 *  usb-serial driver.
  13 *
  14 *  Peter Berger (pberger@brimson.com)
  15 *  Al Borchers (borchers@steinerpoint.com)
  16 */
  17
  18 #include <linux/kernel.h>
  19 #include <linux/errno.h>
  20 #include <linux/slab.h>
  21 #include <linux/tty.h>
  22 #include <linux/tty_driver.h>
  23 #include <linux/tty_flip.h>
  24 #include <linux/module.h>
  25 #include <linux/spinlock.h>
  26 #include <linux/workqueue.h>
  27 #include <linux/uaccess.h>
  28 #include <linux/usb.h>
  29 #include <linux/wait.h>
  30 #include <linux/usb/serial.h>
  31
  32 /* Defines */
  33
  34 #define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
  35 #define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
  36
  37 /* port output buffer length -- must be <= transfer buffer length - 2 */
  38 /* so we can be sure to send the full buffer in one urb */
  39 #define DIGI_OUT_BUF_SIZE               8
  40
  41 /* port input buffer length -- must be >= transfer buffer length - 3 */
  42 /* so we can be sure to hold at least one full buffer from one urb */
  43 #define DIGI_IN_BUF_SIZE                64
  44
  45 /* retry timeout while sleeping */
  46 #define DIGI_RETRY_TIMEOUT              (HZ/10)
  47
  48 /* timeout while waiting for tty output to drain in close */
  49 /* this delay is used twice in close, so the total delay could */
  50 /* be twice this value */
  51 #define DIGI_CLOSE_TIMEOUT              (5*HZ)
  52
  53
  54 /* AccelePort USB Defines */
  55
  56 /* ids */
  57 #define DIGI_VENDOR_ID                  0x05c5
  58 #define DIGI_2_ID                       0x0002  /* USB-2 */
  59 #define DIGI_4_ID                       0x0004  /* USB-4 */
  60
  61 /* commands
  62  * "INB": can be used on the in-band endpoint
  63  * "OOB": can be used on the out-of-band endpoint
  64  */
  65 #define DIGI_CMD_SET_BAUD_RATE                  0       /* INB, OOB */
  66 #define DIGI_CMD_SET_WORD_SIZE                  1       /* INB, OOB */
  67 #define DIGI_CMD_SET_PARITY                     2       /* INB, OOB */
  68 #define DIGI_CMD_SET_STOP_BITS                  3       /* INB, OOB */
  69 #define DIGI_CMD_SET_INPUT_FLOW_CONTROL         4       /* INB, OOB */
  70 #define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL        5       /* INB, OOB */
  71 #define DIGI_CMD_SET_DTR_SIGNAL                 6       /* INB, OOB */
  72 #define DIGI_CMD_SET_RTS_SIGNAL                 7       /* INB, OOB */
  73 #define DIGI_CMD_READ_INPUT_SIGNALS             8       /*      OOB */
  74 #define DIGI_CMD_IFLUSH_FIFO                    9       /*      OOB */
  75 #define DIGI_CMD_RECEIVE_ENABLE                 10      /* INB, OOB */
  76 #define DIGI_CMD_BREAK_CONTROL                  11      /* INB, OOB */
  77 #define DIGI_CMD_LOCAL_LOOPBACK                 12      /* INB, OOB */
  78 #define DIGI_CMD_TRANSMIT_IDLE                  13      /* INB, OOB */
  79 #define DIGI_CMD_READ_UART_REGISTER             14      /*      OOB */
  80 #define DIGI_CMD_WRITE_UART_REGISTER            15      /* INB, OOB */
  81 #define DIGI_CMD_AND_UART_REGISTER              16      /* INB, OOB */
  82 #define DIGI_CMD_OR_UART_REGISTER               17      /* INB, OOB */
  83 #define DIGI_CMD_SEND_DATA                      18      /* INB      */
  84 #define DIGI_CMD_RECEIVE_DATA                   19      /* INB      */
  85 #define DIGI_CMD_RECEIVE_DISABLE                20      /* INB      */
  86 #define DIGI_CMD_GET_PORT_TYPE                  21      /*      OOB */
  87
  88 /* baud rates */
  89 #define DIGI_BAUD_50                            0
  90 #define DIGI_BAUD_75                            1
  91 #define DIGI_BAUD_110                           2
  92 #define DIGI_BAUD_150                           3
  93 #define DIGI_BAUD_200                           4
  94 #define DIGI_BAUD_300                           5
  95 #define DIGI_BAUD_600                           6
  96 #define DIGI_BAUD_1200                          7
  97 #define DIGI_BAUD_1800                          8
  98 #define DIGI_BAUD_2400                          9
  99 #define DIGI_BAUD_4800                          10
 100 #define DIGI_BAUD_7200                          11
 101 #define DIGI_BAUD_9600                          12
 102 #define DIGI_BAUD_14400                         13
 103 #define DIGI_BAUD_19200                         14
 104 #define DIGI_BAUD_28800                         15
 105 #define DIGI_BAUD_38400                         16
 106 #define DIGI_BAUD_57600                         17
 107 #define DIGI_BAUD_76800                         18
 108 #define DIGI_BAUD_115200                        19
 109 #define DIGI_BAUD_153600                        20
 110 #define DIGI_BAUD_230400                        21
 111 #define DIGI_BAUD_460800                        22
 112
 113 /* arguments */
 114 #define DIGI_WORD_SIZE_5                        0
 115 #define DIGI_WORD_SIZE_6                        1
 116 #define DIGI_WORD_SIZE_7                        2
 117 #define DIGI_WORD_SIZE_8                        3
 118
 119 #define DIGI_PARITY_NONE                        0
 120 #define DIGI_PARITY_ODD                         1
 121 #define DIGI_PARITY_EVEN                        2
 122 #define DIGI_PARITY_MARK                        3
 123 #define DIGI_PARITY_SPACE                       4
 124
 125 #define DIGI_STOP_BITS_1                        0
 126 #define DIGI_STOP_BITS_2                        1
 127
 128 #define DIGI_INPUT_FLOW_CONTROL_XON_XOFF        1
 129 #define DIGI_INPUT_FLOW_CONTROL_RTS             2
 130 #define DIGI_INPUT_FLOW_CONTROL_DTR             4
 131
 132 #define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF       1
 133 #define DIGI_OUTPUT_FLOW_CONTROL_CTS            2
 134 #define DIGI_OUTPUT_FLOW_CONTROL_DSR            4
 135
 136 #define DIGI_DTR_INACTIVE                       0
 137 #define DIGI_DTR_ACTIVE                         1
 138 #define DIGI_DTR_INPUT_FLOW_CONTROL             2
 139
 140 #define DIGI_RTS_INACTIVE                       0
 141 #define DIGI_RTS_ACTIVE                         1
 142 #define DIGI_RTS_INPUT_FLOW_CONTROL             2
 143 #define DIGI_RTS_TOGGLE                         3
 144
 145 #define DIGI_FLUSH_TX                           1
 146 #define DIGI_FLUSH_RX                           2
 147 #define DIGI_RESUME_TX                          4 /* clears xoff condition */
 148
 149 #define DIGI_TRANSMIT_NOT_IDLE                  0
 150 #define DIGI_TRANSMIT_IDLE                      1
 151
 152 #define DIGI_DISABLE                            0
 153 #define DIGI_ENABLE                             1
 154
 155 #define DIGI_DEASSERT                           0
 156 #define DIGI_ASSERT                             1
 157
 158 /* in band status codes */
 159 #define DIGI_OVERRUN_ERROR                      4
 160 #define DIGI_PARITY_ERROR                       8
 161 #define DIGI_FRAMING_ERROR                      16
 162 #define DIGI_BREAK_ERROR                        32
 163
 164 /* out of band status */
 165 #define DIGI_NO_ERROR                           0
 166 #define DIGI_BAD_FIRST_PARAMETER                1
 167 #define DIGI_BAD_SECOND_PARAMETER               2
 168 #define DIGI_INVALID_LINE                       3
 169 #define DIGI_INVALID_OPCODE                     4
 170
 171 /* input signals */
 172 #define DIGI_READ_INPUT_SIGNALS_SLOT            1
 173 #define DIGI_READ_INPUT_SIGNALS_ERR             2
 174 #define DIGI_READ_INPUT_SIGNALS_BUSY            4
 175 #define DIGI_READ_INPUT_SIGNALS_PE              8
 176 #define DIGI_READ_INPUT_SIGNALS_CTS             16
 177 #define DIGI_READ_INPUT_SIGNALS_DSR             32
 178 #define DIGI_READ_INPUT_SIGNALS_RI              64
 179 #define DIGI_READ_INPUT_SIGNALS_DCD             128
 180
 181
 182 /* Structures */
 183
 184 struct digi_serial {
 185         spinlock_t ds_serial_lock;
 186         struct usb_serial_port *ds_oob_port;    /* out-of-band port */
 187         int ds_oob_port_num;                    /* index of out-of-band port */
 188         int ds_device_started;
 189 };
 190
 191 struct digi_port {
 192         spinlock_t dp_port_lock;
 193         int dp_port_num;
 194         int dp_out_buf_len;
 195         unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
 196         int dp_write_urb_in_use;
 197         unsigned int dp_modem_signals;
 198         int dp_transmit_idle;
 199         wait_queue_head_t dp_transmit_idle_wait;
 200         int dp_throttled;
 201         int dp_throttle_restart;
 202         wait_queue_head_t dp_flush_wait;
 203         wait_queue_head_t dp_close_wait;        /* wait queue for close */
 204         struct work_struct dp_wakeup_work;
 205         struct usb_serial_port *dp_port;
 206 };
 207
 208
 209 /* Local Function Declarations */
 210
 211 static void digi_wakeup_write_lock(struct work_struct *work);
 212 static int digi_write_oob_command(struct usb_serial_port *port,
 213         unsigned char *buf, int count, int interruptible);
 214 static int digi_write_inb_command(struct usb_serial_port *port,
 215         unsigned char *buf, int count, unsigned long timeout);
 216 static int digi_set_modem_signals(struct usb_serial_port *port,
 217         unsigned int modem_signals, int interruptible);
 218 static int digi_transmit_idle(struct usb_serial_port *port,
 219         unsigned long timeout);
 220 static void digi_rx_throttle(struct tty_struct *tty);
 221 static void digi_rx_unthrottle(struct tty_struct *tty);
 222 static void digi_set_termios(struct tty_struct *tty,
 223                 struct usb_serial_port *port, struct ktermios *old_termios);
 224 static void digi_break_ctl(struct tty_struct *tty, int break_state);
 225 static int digi_tiocmget(struct tty_struct *tty);
 226 static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
 227                 unsigned int clear);
 228 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 229                 const unsigned char *buf, int count);
 230 static void digi_write_bulk_callback(struct urb *urb);
 231 static int digi_write_room(struct tty_struct *tty);
 232 static int digi_chars_in_buffer(struct tty_struct *tty);
 233 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 234 static void digi_close(struct usb_serial_port *port);
 235 static void digi_dtr_rts(struct usb_serial_port *port, int on);
 236 static int digi_startup_device(struct usb_serial *serial);
 237 static int digi_startup(struct usb_serial *serial);
 238 static void digi_disconnect(struct usb_serial *serial);
 239 static void digi_release(struct usb_serial *serial);
 240 static int digi_port_probe(struct usb_serial_port *port);
 241 static int digi_port_remove(struct usb_serial_port *port);
 242 static void digi_read_bulk_callback(struct urb *urb);
 243 static int digi_read_inb_callback(struct urb *urb);
 244 static int digi_read_oob_callback(struct urb *urb);
 245
 246
 247 static const struct usb_device_id id_table_combined[] = {
 248         { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
 249         { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
 250         { }                                             /* Terminating entry */
 251 };
 252
 253 static const struct usb_device_id id_table_2[] = {
 254         { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
 255         { }                                             /* Terminating entry */
 256 };
 257
 258 static const struct usb_device_id id_table_4[] = {
 259         { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
 260         { }                                             /* Terminating entry */
 261 };
 262
 263 MODULE_DEVICE_TABLE(usb, id_table_combined);
 264
 265 /* device info needed for the Digi serial converter */
 266
 267 static struct usb_serial_driver digi_acceleport_2_device = {
 268         .driver = {
 269                 .owner =                THIS_MODULE,
 270                 .name =                 "digi_2",
 271         },
 272         .description =                  "Digi 2 port USB adapter",
 273         .id_table =                     id_table_2,
 274         .num_ports =                    3,
 275         .open =                         digi_open,
 276         .close =                        digi_close,
 277         .dtr_rts =                      digi_dtr_rts,
 278         .write =                        digi_write,
 279         .write_room =                   digi_write_room,
 280         .write_bulk_callback =          digi_write_bulk_callback,
 281         .read_bulk_callback =           digi_read_bulk_callback,
 282         .chars_in_buffer =              digi_chars_in_buffer,
 283         .throttle =                     digi_rx_throttle,
 284         .unthrottle =                   digi_rx_unthrottle,
 285         .set_termios =                  digi_set_termios,
 286         .break_ctl =                    digi_break_ctl,
 287         .tiocmget =                     digi_tiocmget,
 288         .tiocmset =                     digi_tiocmset,
 289         .attach =                       digi_startup,
 290         .disconnect =                   digi_disconnect,
 291         .release =                      digi_release,
 292         .port_probe =                   digi_port_probe,
 293         .port_remove =                  digi_port_remove,
 294 };
 295
 296 static struct usb_serial_driver digi_acceleport_4_device = {
 297         .driver = {
 298                 .owner =                THIS_MODULE,
 299                 .name =                 "digi_4",
 300         },
 301         .description =                  "Digi 4 port USB adapter",
 302         .id_table =                     id_table_4,
 303         .num_ports =                    4,
 304         .open =                         digi_open,
 305         .close =                        digi_close,
 306         .write =                        digi_write,
 307         .write_room =                   digi_write_room,
 308         .write_bulk_callback =          digi_write_bulk_callback,
 309         .read_bulk_callback =           digi_read_bulk_callback,
 310         .chars_in_buffer =              digi_chars_in_buffer,
 311         .throttle =                     digi_rx_throttle,
 312         .unthrottle =                   digi_rx_unthrottle,
 313         .set_termios =                  digi_set_termios,
 314         .break_ctl =                    digi_break_ctl,
 315         .tiocmget =                     digi_tiocmget,
 316         .tiocmset =                     digi_tiocmset,
 317         .attach =                       digi_startup,
 318         .disconnect =                   digi_disconnect,
 319         .release =                      digi_release,
 320         .port_probe =                   digi_port_probe,
 321         .port_remove =                  digi_port_remove,
 322 };
 323
 324 static struct usb_serial_driver * const serial_drivers[] = {
 325         &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
 326 };
 327
 328 /* Functions */
 329
 330 /*
 331  *  Cond Wait Interruptible Timeout Irqrestore
 332  *
 333  *  Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
 334  *  so that wake ups are not lost if they occur between the unlock
 335  *  and the sleep.  In other words, spin_unlock_irqrestore and
 336  *  interruptible_sleep_on_timeout are "atomic" with respect to
 337  *  wake ups.  This is used to implement condition variables.
 338  *
 339  *  interruptible_sleep_on_timeout is deprecated and has been replaced
 340  *  with the equivalent code.
 341  */
 342
 343 static long cond_wait_interruptible_timeout_irqrestore(
 344         wait_queue_head_t *q, long timeout,
 345         spinlock_t *lock, unsigned long flags)
 346 __releases(lock)
 347 {
 348         DEFINE_WAIT(wait);
 349
 350         prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
 351         spin_unlock_irqrestore(lock, flags);
 352         timeout = schedule_timeout(timeout);
 353         finish_wait(q, &wait);
 354
 355         return timeout;
 356 }
 357
 358
 359 /*
 360  *  Digi Wakeup Write
 361  *
 362  *  Wake up port, line discipline, and tty processes sleeping
 363  *  on writes.
 364  */
 365
 366 static void digi_wakeup_write_lock(struct work_struct *work)
 367 {
 368         struct digi_port *priv =
 369                         container_of(work, struct digi_port, dp_wakeup_work);
 370         struct usb_serial_port *port = priv->dp_port;
 371         unsigned long flags;
 372
 373         spin_lock_irqsave(&priv->dp_port_lock, flags);
 374         tty_port_tty_wakeup(&port->port);
 375         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 376 }
 377
 378 /*
 379  *  Digi Write OOB Command
 380  *
 381  *  Write commands on the out of band port.  Commands are 4
 382  *  bytes each, multiple commands can be sent at once, and
 383  *  no command will be split across USB packets.  Returns 0
 384  *  if successful, -EINTR if interrupted while sleeping and
 385  *  the interruptible flag is true, or a negative error
 386  *  returned by usb_submit_urb.
 387  */
 388
 389 static int digi_write_oob_command(struct usb_serial_port *port,
 390         unsigned char *buf, int count, int interruptible)
 391 {
 392         int ret = 0;
 393         int len;
 394         struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
 395         struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
 396         unsigned long flags = 0;
 397
 398         dev_dbg(&port->dev,
 399                 "digi_write_oob_command: TOP: port=%d, count=%d\n",
 400                 oob_priv->dp_port_num, count);
 401
 402         spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
 403         while (count > 0) {
 404                 while (oob_priv->dp_write_urb_in_use) {
 405                         cond_wait_interruptible_timeout_irqrestore(
 406                                 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
 407                                 &oob_priv->dp_port_lock, flags);
 408                         if (interruptible && signal_pending(current))
 409                                 return -EINTR;
 410                         spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
 411                 }
 412
 413                 /* len must be a multiple of 4, so commands are not split */
 414                 len = min(count, oob_port->bulk_out_size);
 415                 if (len > 4)
 416                         len &= ~3;
 417                 memcpy(oob_port->write_urb->transfer_buffer, buf, len);
 418                 oob_port->write_urb->transfer_buffer_length = len;
 419                 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
 420                 if (ret == 0) {
 421                         oob_priv->dp_write_urb_in_use = 1;
 422                         count -= len;
 423                         buf += len;
 424                 }
 425         }
 426         spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
 427         if (ret)
 428                 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
 429                         __func__, ret);
 430         return ret;
 431
 432 }
 433
 434
 435 /*
 436  *  Digi Write In Band Command
 437  *
 438  *  Write commands on the given port.  Commands are 4
 439  *  bytes each, multiple commands can be sent at once, and
 440  *  no command will be split across USB packets.  If timeout
 441  *  is non-zero, write in band command will return after
 442  *  waiting unsuccessfully for the URB status to clear for
 443  *  timeout ticks.  Returns 0 if successful, or a negative
 444  *  error returned by digi_write.
 445  */
 446
 447 static int digi_write_inb_command(struct usb_serial_port *port,
 448         unsigned char *buf, int count, unsigned long timeout)
 449 {
 450         int ret = 0;
 451         int len;
 452         struct digi_port *priv = usb_get_serial_port_data(port);
 453         unsigned char *data = port->write_urb->transfer_buffer;
 454         unsigned long flags = 0;
 455
 456         dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
 457                 priv->dp_port_num, count);
 458
 459         if (timeout)
 460                 timeout += jiffies;
 461         else
 462                 timeout = ULONG_MAX;
 463
 464         spin_lock_irqsave(&priv->dp_port_lock, flags);
 465         while (count > 0 && ret == 0) {
 466                 while (priv->dp_write_urb_in_use &&
 467                        time_before(jiffies, timeout)) {
 468                         cond_wait_interruptible_timeout_irqrestore(
 469                                 &port->write_wait, DIGI_RETRY_TIMEOUT,
 470                                 &priv->dp_port_lock, flags);
 471                         if (signal_pending(current))
 472                                 return -EINTR;
 473                         spin_lock_irqsave(&priv->dp_port_lock, flags);
 474                 }
 475
 476                 /* len must be a multiple of 4 and small enough to */
 477                 /* guarantee the write will send buffered data first, */
 478                 /* so commands are in order with data and not split */
 479                 len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
 480                 if (len > 4)
 481                         len &= ~3;
 482
 483                 /* write any buffered data first */
 484                 if (priv->dp_out_buf_len > 0) {
 485                         data[0] = DIGI_CMD_SEND_DATA;
 486                         data[1] = priv->dp_out_buf_len;
 487                         memcpy(data + 2, priv->dp_out_buf,
 488                                 priv->dp_out_buf_len);
 489                         memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
 490                         port->write_urb->transfer_buffer_length
 491                                 = priv->dp_out_buf_len + 2 + len;
 492                 } else {
 493                         memcpy(data, buf, len);
 494                         port->write_urb->transfer_buffer_length = len;
 495                 }
 496
 497                 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 498                 if (ret == 0) {
 499                         priv->dp_write_urb_in_use = 1;
 500                         priv->dp_out_buf_len = 0;
 501                         count -= len;
 502                         buf += len;
 503                 }
 504
 505         }
 506         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 507
 508         if (ret)
 509                 dev_err(&port->dev,
 510                         "%s: usb_submit_urb failed, ret=%d, port=%d\n",
 511                         __func__, ret, priv->dp_port_num);
 512         return ret;
 513 }
 514
 515
 516 /*
 517  *  Digi Set Modem Signals
 518  *
 519  *  Sets or clears DTR and RTS on the port, according to the
 520  *  modem_signals argument.  Use TIOCM_DTR and TIOCM_RTS flags
 521  *  for the modem_signals argument.  Returns 0 if successful,
 522  *  -EINTR if interrupted while sleeping, or a non-zero error
 523  *  returned by usb_submit_urb.
 524  */
 525
 526 static int digi_set_modem_signals(struct usb_serial_port *port,
 527         unsigned int modem_signals, int interruptible)
 528 {
 529
 530         int ret;
 531         struct digi_port *port_priv = usb_get_serial_port_data(port);
 532         struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
 533         struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
 534         unsigned char *data = oob_port->write_urb->transfer_buffer;
 535         unsigned long flags = 0;
 536
 537
 538         dev_dbg(&port->dev,
 539                 "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
 540                 port_priv->dp_port_num, modem_signals);
 541
 542         spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
 543         spin_lock(&port_priv->dp_port_lock);
 544
 545         while (oob_priv->dp_write_urb_in_use) {
 546                 spin_unlock(&port_priv->dp_port_lock);
 547                 cond_wait_interruptible_timeout_irqrestore(
 548                         &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
 549                         &oob_priv->dp_port_lock, flags);
 550                 if (interruptible && signal_pending(current))
 551                         return -EINTR;
 552                 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
 553                 spin_lock(&port_priv->dp_port_lock);
 554         }
 555         data[0] = DIGI_CMD_SET_DTR_SIGNAL;
 556         data[1] = port_priv->dp_port_num;
 557         data[2] = (modem_signals & TIOCM_DTR) ?
 558                                         DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
 559         data[3] = 0;
 560         data[4] = DIGI_CMD_SET_RTS_SIGNAL;
 561         data[5] = port_priv->dp_port_num;
 562         data[6] = (modem_signals & TIOCM_RTS) ?
 563                                         DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
 564         data[7] = 0;
 565
 566         oob_port->write_urb->transfer_buffer_length = 8;
 567
 568         ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
 569         if (ret == 0) {
 570                 oob_priv->dp_write_urb_in_use = 1;
 571                 port_priv->dp_modem_signals =
 572                         (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
 573                         | (modem_signals&(TIOCM_DTR|TIOCM_RTS));
 574         }
 575         spin_unlock(&port_priv->dp_port_lock);
 576         spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
 577         if (ret)
 578                 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
 579                         __func__, ret);
 580         return ret;
 581 }
 582
 583 /*
 584  *  Digi Transmit Idle
 585  *
 586  *  Digi transmit idle waits, up to timeout ticks, for the transmitter
 587  *  to go idle.  It returns 0 if successful or a negative error.
 588  *
 589  *  There are race conditions here if more than one process is calling
 590  *  digi_transmit_idle on the same port at the same time.  However, this
 591  *  is only called from close, and only one process can be in close on a
 592  *  port at a time, so its ok.
 593  */
 594
 595 static int digi_transmit_idle(struct usb_serial_port *port,
 596         unsigned long timeout)
 597 {
 598         int ret;
 599         unsigned char buf[2];
 600         struct digi_port *priv = usb_get_serial_port_data(port);
 601         unsigned long flags = 0;
 602
 603         spin_lock_irqsave(&priv->dp_port_lock, flags);
 604         priv->dp_transmit_idle = 0;
 605         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 606
 607         buf[0] = DIGI_CMD_TRANSMIT_IDLE;
 608         buf[1] = 0;
 609
 610         timeout += jiffies;
 611
 612         ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
 613         if (ret != 0)
 614                 return ret;
 615
 616         spin_lock_irqsave(&priv->dp_port_lock, flags);
 617
 618         while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
 619                 cond_wait_interruptible_timeout_irqrestore(
 620                         &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
 621                         &priv->dp_port_lock, flags);
 622                 if (signal_pending(current))
 623                         return -EINTR;
 624                 spin_lock_irqsave(&priv->dp_port_lock, flags);
 625         }
 626         priv->dp_transmit_idle = 0;
 627         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 628         return 0;
 629
 630 }
 631
 632
 633 static void digi_rx_throttle(struct tty_struct *tty)
 634 {
 635         unsigned long flags;
 636         struct usb_serial_port *port = tty->driver_data;
 637         struct digi_port *priv = usb_get_serial_port_data(port);
 638
 639         /* stop receiving characters by not resubmitting the read urb */
 640         spin_lock_irqsave(&priv->dp_port_lock, flags);
 641         priv->dp_throttled = 1;
 642         priv->dp_throttle_restart = 0;
 643         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 644 }
 645
 646
 647 static void digi_rx_unthrottle(struct tty_struct *tty)
 648 {
 649         int ret = 0;
 650         unsigned long flags;
 651         struct usb_serial_port *port = tty->driver_data;
 652         struct digi_port *priv = usb_get_serial_port_data(port);
 653
 654         spin_lock_irqsave(&priv->dp_port_lock, flags);
 655
 656         /* restart read chain */
 657         if (priv->dp_throttle_restart)
 658                 ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 659
 660         /* turn throttle off */
 661         priv->dp_throttled = 0;
 662         priv->dp_throttle_restart = 0;
 663
 664         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 665
 666         if (ret)
 667                 dev_err(&port->dev,
 668                         "%s: usb_submit_urb failed, ret=%d, port=%d\n",
 669                         __func__, ret, priv->dp_port_num);
 670 }
 671
 672
 673 static void digi_set_termios(struct tty_struct *tty,
 674                 struct usb_serial_port *port, struct ktermios *old_termios)
 675 {
 676         struct digi_port *priv = usb_get_serial_port_data(port);
 677         struct device *dev = &port->dev;
 678         unsigned int iflag = tty->termios.c_iflag;
 679         unsigned int cflag = tty->termios.c_cflag;
 680         unsigned int old_iflag = old_termios->c_iflag;
 681         unsigned int old_cflag = old_termios->c_cflag;
 682         unsigned char buf[32];
 683         unsigned int modem_signals;
 684         int arg, ret;
 685         int i = 0;
 686         speed_t baud;
 687
 688         dev_dbg(dev,
 689                 "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
 690                 priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
 691
 692         /* set baud rate */
 693         baud = tty_get_baud_rate(tty);
 694         if (baud != tty_termios_baud_rate(old_termios)) {
 695                 arg = -1;
 696
 697                 /* reassert DTR and (maybe) RTS on transition from B0 */
 698                 if ((old_cflag&CBAUD) == B0) {
 699                         /* don't set RTS if using hardware flow control */
 700                         /* and throttling input */
 701                         modem_signals = TIOCM_DTR;
 702                         if (!(tty->termios.c_cflag & CRTSCTS) ||
 703                             !test_bit(TTY_THROTTLED, &tty->flags))
 704                                 modem_signals |= TIOCM_RTS;
 705                         digi_set_modem_signals(port, modem_signals, 1);
 706                 }
 707                 switch (baud) {
 708                 /* drop DTR and RTS on transition to B0 */
 709                 case 0: digi_set_modem_signals(port, 0, 1); break;
 710                 case 50: arg = DIGI_BAUD_50; break;
 711                 case 75: arg = DIGI_BAUD_75; break;
 712                 case 110: arg = DIGI_BAUD_110; break;
 713                 case 150: arg = DIGI_BAUD_150; break;
 714                 case 200: arg = DIGI_BAUD_200; break;
 715                 case 300: arg = DIGI_BAUD_300; break;
 716                 case 600: arg = DIGI_BAUD_600; break;
 717                 case 1200: arg = DIGI_BAUD_1200; break;
 718                 case 1800: arg = DIGI_BAUD_1800; break;
 719                 case 2400: arg = DIGI_BAUD_2400; break;
 720                 case 4800: arg = DIGI_BAUD_4800; break;
 721                 case 9600: arg = DIGI_BAUD_9600; break;
 722                 case 19200: arg = DIGI_BAUD_19200; break;
 723                 case 38400: arg = DIGI_BAUD_38400; break;
 724                 case 57600: arg = DIGI_BAUD_57600; break;
 725                 case 115200: arg = DIGI_BAUD_115200; break;
 726                 case 230400: arg = DIGI_BAUD_230400; break;
 727                 case 460800: arg = DIGI_BAUD_460800; break;
 728                 default:
 729                         arg = DIGI_BAUD_9600;
 730                         baud = 9600;
 731                         break;
 732                 }
 733                 if (arg != -1) {
 734                         buf[i++] = DIGI_CMD_SET_BAUD_RATE;
 735                         buf[i++] = priv->dp_port_num;
 736                         buf[i++] = arg;
 737                         buf[i++] = 0;
 738                 }
 739         }
 740         /* set parity */
 741         tty->termios.c_cflag &= ~CMSPAR;
 742
 743         if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
 744                 if (cflag&PARENB) {
 745                         if (cflag&PARODD)
 746                                 arg = DIGI_PARITY_ODD;
 747                         else
 748                                 arg = DIGI_PARITY_EVEN;
 749                 } else {
 750                         arg = DIGI_PARITY_NONE;
 751                 }
 752                 buf[i++] = DIGI_CMD_SET_PARITY;
 753                 buf[i++] = priv->dp_port_num;
 754                 buf[i++] = arg;
 755                 buf[i++] = 0;
 756         }
 757         /* set word size */
 758         if ((cflag&CSIZE) != (old_cflag&CSIZE)) {
 759                 arg = -1;
 760                 switch (cflag&CSIZE) {
 761                 case CS5: arg = DIGI_WORD_SIZE_5; break;
 762                 case CS6: arg = DIGI_WORD_SIZE_6; break;
 763                 case CS7: arg = DIGI_WORD_SIZE_7; break;
 764                 case CS8: arg = DIGI_WORD_SIZE_8; break;
 765                 default:
 766                         dev_dbg(dev,
 767                                 "digi_set_termios: can't handle word size %d\n",
 768                                 (cflag&CSIZE));
 769                         break;
 770                 }
 771
 772                 if (arg != -1) {
 773                         buf[i++] = DIGI_CMD_SET_WORD_SIZE;
 774                         buf[i++] = priv->dp_port_num;
 775                         buf[i++] = arg;
 776                         buf[i++] = 0;
 777                 }
 778
 779         }
 780
 781         /* set stop bits */
 782         if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) {
 783
 784                 if ((cflag&CSTOPB))
 785                         arg = DIGI_STOP_BITS_2;
 786                 else
 787                         arg = DIGI_STOP_BITS_1;
 788
 789                 buf[i++] = DIGI_CMD_SET_STOP_BITS;
 790                 buf[i++] = priv->dp_port_num;
 791                 buf[i++] = arg;
 792                 buf[i++] = 0;
 793
 794         }
 795
 796         /* set input flow control */
 797         if ((iflag&IXOFF) != (old_iflag&IXOFF)
 798             || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
 799                 arg = 0;
 800                 if (iflag&IXOFF)
 801                         arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
 802                 else
 803                         arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
 804
 805                 if (cflag&CRTSCTS) {
 806                         arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
 807
 808                         /* On USB-4 it is necessary to assert RTS prior */
 809                         /* to selecting RTS input flow control.  */
 810                         buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
 811                         buf[i++] = priv->dp_port_num;
 812                         buf[i++] = DIGI_RTS_ACTIVE;
 813                         buf[i++] = 0;
 814
 815                 } else {
 816                         arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
 817                 }
 818                 buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
 819                 buf[i++] = priv->dp_port_num;
 820                 buf[i++] = arg;
 821                 buf[i++] = 0;
 822         }
 823
 824         /* set output flow control */
 825         if ((iflag & IXON) != (old_iflag & IXON)
 826             || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 827                 arg = 0;
 828                 if (iflag & IXON)
 829                         arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
 830                 else
 831                         arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
 832
 833                 if (cflag & CRTSCTS) {
 834                         arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
 835                 } else {
 836                         arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
 837                         tty->hw_stopped = 0;
 838                 }
 839
 840                 buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
 841                 buf[i++] = priv->dp_port_num;
 842                 buf[i++] = arg;
 843                 buf[i++] = 0;
 844         }
 845
 846         /* set receive enable/disable */
 847         if ((cflag & CREAD) != (old_cflag & CREAD)) {
 848                 if (cflag & CREAD)
 849                         arg = DIGI_ENABLE;
 850                 else
 851                         arg = DIGI_DISABLE;
 852
 853                 buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
 854                 buf[i++] = priv->dp_port_num;
 855                 buf[i++] = arg;
 856                 buf[i++] = 0;
 857         }
 858         ret = digi_write_oob_command(port, buf, i, 1);
 859         if (ret != 0)
 860                 dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
 861         tty_encode_baud_rate(tty, baud, baud);
 862 }
 863
 864
 865 static void digi_break_ctl(struct tty_struct *tty, int break_state)
 866 {
 867         struct usb_serial_port *port = tty->driver_data;
 868         unsigned char buf[4];
 869
 870         buf[0] = DIGI_CMD_BREAK_CONTROL;
 871         buf[1] = 2;                             /* length */
 872         buf[2] = break_state ? 1 : 0;
 873         buf[3] = 0;                             /* pad */
 874         digi_write_inb_command(port, buf, 4, 0);
 875 }
 876
 877
 878 static int digi_tiocmget(struct tty_struct *tty)
 879 {
 880         struct usb_serial_port *port = tty->driver_data;
 881         struct digi_port *priv = usb_get_serial_port_data(port);
 882         unsigned int val;
 883         unsigned long flags;
 884
 885         spin_lock_irqsave(&priv->dp_port_lock, flags);
 886         val = priv->dp_modem_signals;
 887         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 888         return val;
 889 }
 890
 891
 892 static int digi_tiocmset(struct tty_struct *tty,
 893                                         unsigned int set, unsigned int clear)
 894 {
 895         struct usb_serial_port *port = tty->driver_data;
 896         struct digi_port *priv = usb_get_serial_port_data(port);
 897         unsigned int val;
 898         unsigned long flags;
 899
 900         spin_lock_irqsave(&priv->dp_port_lock, flags);
 901         val = (priv->dp_modem_signals & ~clear) | set;
 902         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 903         return digi_set_modem_signals(port, val, 1);
 904 }
 905
 906
 907 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 908                                         const unsigned char *buf, int count)
 909 {
 910
 911         int ret, data_len, new_len;
 912         struct digi_port *priv = usb_get_serial_port_data(port);
 913         unsigned char *data = port->write_urb->transfer_buffer;
 914         unsigned long flags = 0;
 915
 916         dev_dbg(&port->dev,
 917                 "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
 918                 priv->dp_port_num, count, in_interrupt());
 919
 920         /* copy user data (which can sleep) before getting spin lock */
 921         count = min(count, port->bulk_out_size-2);
 922         count = min(64, count);
 923
 924         /* be sure only one write proceeds at a time */
 925         /* there are races on the port private buffer */
 926         spin_lock_irqsave(&priv->dp_port_lock, flags);
 927
 928         /* wait for urb status clear to submit another urb */
 929         if (priv->dp_write_urb_in_use) {
 930                 /* buffer data if count is 1 (probably put_char) if possible */
 931                 if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
 932                         priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
 933                         new_len = 1;
 934                 } else {
 935                         new_len = 0;
 936                 }
 937                 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 938                 return new_len;
 939         }
 940
 941         /* allow space for any buffered data and for new data, up to */
 942         /* transfer buffer size - 2 (for command and length bytes) */
 943         new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
 944         data_len = new_len + priv->dp_out_buf_len;
 945
 946         if (data_len == 0) {
 947                 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 948                 return 0;
 949         }
 950
 951         port->write_urb->transfer_buffer_length = data_len+2;
 952
 953         *data++ = DIGI_CMD_SEND_DATA;
 954         *data++ = data_len;
 955
 956         /* copy in buffered data first */
 957         memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
 958         data += priv->dp_out_buf_len;
 959
 960         /* copy in new data */
 961         memcpy(data, buf, new_len);
 962
 963         ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 964         if (ret == 0) {
 965                 priv->dp_write_urb_in_use = 1;
 966                 ret = new_len;
 967                 priv->dp_out_buf_len = 0;
 968         }
 969
 970         /* return length of new data written, or error */
 971         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 972         if (ret < 0)
 973                 dev_err_console(port,
 974                         "%s: usb_submit_urb failed, ret=%d, port=%d\n",
 975                         __func__, ret, priv->dp_port_num);
 976         dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
 977         return ret;
 978
 979 }
 980
 981 static void digi_write_bulk_callback(struct urb *urb)
 982 {
 983
 984         struct usb_serial_port *port = urb->context;
 985         struct usb_serial *serial;
 986         struct digi_port *priv;
 987         struct digi_serial *serial_priv;
 988         int ret = 0;
 989         int status = urb->status;
 990
 991         /* port and serial sanity check */
 992         if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
 993                 pr_err("%s: port or port->private is NULL, status=%d\n",
 994                         __func__, status);
 995                 return;
 996         }
 997         serial = port->serial;
 998         if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
 999                 dev_err(&port->dev,
1000                         "%s: serial or serial->private is NULL, status=%d\n",
1001                         __func__, status);
1002                 return;
1003         }
1004
1005         /* handle oob callback */
1006         if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1007                 dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
1008                 spin_lock(&priv->dp_port_lock);
1009                 priv->dp_write_urb_in_use = 0;
1010                 wake_up_interruptible(&port->write_wait);
1011                 spin_unlock(&priv->dp_port_lock);
1012                 return;
1013         }
1014
1015         /* try to send any buffered data on this port */
1016         spin_lock(&priv->dp_port_lock);
1017         priv->dp_write_urb_in_use = 0;
1018         if (priv->dp_out_buf_len > 0) {
1019                 *((unsigned char *)(port->write_urb->transfer_buffer))
1020                         = (unsigned char)DIGI_CMD_SEND_DATA;
1021                 *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
1022                         = (unsigned char)priv->dp_out_buf_len;
1023                 port->write_urb->transfer_buffer_length =
1024                                                 priv->dp_out_buf_len + 2;
1025                 memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
1026                         priv->dp_out_buf_len);
1027                 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1028                 if (ret == 0) {
1029                         priv->dp_write_urb_in_use = 1;
1030                         priv->dp_out_buf_len = 0;
1031                 }
1032         }
1033         /* wake up processes sleeping on writes immediately */
1034         tty_port_tty_wakeup(&port->port);
1035         /* also queue up a wakeup at scheduler time, in case we */
1036         /* lost the race in write_chan(). */
1037         schedule_work(&priv->dp_wakeup_work);
1038
1039         spin_unlock(&priv->dp_port_lock);
1040         if (ret && ret != -EPERM)
1041                 dev_err_console(port,
1042                         "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1043                         __func__, ret, priv->dp_port_num);
1044 }
1045
1046 static int digi_write_room(struct tty_struct *tty)
1047 {
1048         struct usb_serial_port *port = tty->driver_data;
1049         struct digi_port *priv = usb_get_serial_port_data(port);
1050         int room;
1051         unsigned long flags = 0;
1052
1053         spin_lock_irqsave(&priv->dp_port_lock, flags);
1054
1055         if (priv->dp_write_urb_in_use)
1056                 room = 0;
1057         else
1058                 room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
1059
1060         spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1061         dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room);
1062         return room;
1063
1064 }
1065
1066 static int digi_chars_in_buffer(struct tty_struct *tty)
1067 {
1068         struct usb_serial_port *port = tty->driver_data;
1069         struct digi_port *priv = usb_get_serial_port_data(port);
1070
1071         if (priv->dp_write_urb_in_use) {
1072                 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1073                         priv->dp_port_num, port->bulk_out_size - 2);
1074                 /* return(port->bulk_out_size - 2); */
1075                 return 256;
1076         } else {
1077                 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1078                         priv->dp_port_num, priv->dp_out_buf_len);
1079                 return priv->dp_out_buf_len;
1080         }
1081
1082 }
1083
1084 static void digi_dtr_rts(struct usb_serial_port *port, int on)
1085 {
1086         /* Adjust DTR and RTS */
1087         digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
1088 }
1089
1090 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
1091 {
1092         int ret;
1093         unsigned char buf[32];
1094         struct digi_port *priv = usb_get_serial_port_data(port);
1095         struct ktermios not_termios;
1096
1097         /* be sure the device is started up */
1098         if (digi_startup_device(port->serial) != 0)
1099                 return -ENXIO;
1100
1101         /* read modem signals automatically whenever they change */
1102         buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
1103         buf[1] = priv->dp_port_num;
1104         buf[2] = DIGI_ENABLE;
1105         buf[3] = 0;
1106
1107         /* flush fifos */
1108         buf[4] = DIGI_CMD_IFLUSH_FIFO;
1109         buf[5] = priv->dp_port_num;
1110         buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1111         buf[7] = 0;
1112
1113         ret = digi_write_oob_command(port, buf, 8, 1);
1114         if (ret != 0)
1115                 dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
1116
1117         /* set termios settings */
1118         if (tty) {
1119                 not_termios.c_cflag = ~tty->termios.c_cflag;
1120                 not_termios.c_iflag = ~tty->termios.c_iflag;
1121                 digi_set_termios(tty, port, &not_termios);
1122         }
1123         return 0;
1124 }
1125
1126
1127 static void digi_close(struct usb_serial_port *port)
1128 {
1129         DEFINE_WAIT(wait);
1130         int ret;
1131         unsigned char buf[32];
1132         struct digi_port *priv = usb_get_serial_port_data(port);
1133
1134         mutex_lock(&port->serial->disc_mutex);
1135         /* if disconnected, just clear flags */
1136         if (port->serial->disconnected)
1137                 goto exit;
1138
1139         /* FIXME: Transmit idle belongs in the wait_unti_sent path */
1140         digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
1141
1142         /* disable input flow control */
1143         buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
1144         buf[1] = priv->dp_port_num;
1145         buf[2] = DIGI_DISABLE;
1146         buf[3] = 0;
1147
1148         /* disable output flow control */
1149         buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
1150         buf[5] = priv->dp_port_num;
1151         buf[6] = DIGI_DISABLE;
1152         buf[7] = 0;
1153
1154         /* disable reading modem signals automatically */
1155         buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
1156         buf[9] = priv->dp_port_num;
1157         buf[10] = DIGI_DISABLE;
1158         buf[11] = 0;
1159
1160         /* disable receive */
1161         buf[12] = DIGI_CMD_RECEIVE_ENABLE;
1162         buf[13] = priv->dp_port_num;
1163         buf[14] = DIGI_DISABLE;
1164         buf[15] = 0;
1165
1166         /* flush fifos */
1167         buf[16] = DIGI_CMD_IFLUSH_FIFO;
1168         buf[17] = priv->dp_port_num;
1169         buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1170         buf[19] = 0;
1171
1172         ret = digi_write_oob_command(port, buf, 20, 0);
1173         if (ret != 0)
1174                 dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
1175                                                                         ret);
1176         /* wait for final commands on oob port to complete */
1177         prepare_to_wait(&priv->dp_flush_wait, &wait,
1178                         TASK_INTERRUPTIBLE);
1179         schedule_timeout(DIGI_CLOSE_TIMEOUT);
1180         finish_wait(&priv->dp_flush_wait, &wait);
1181
1182         /* shutdown any outstanding bulk writes */
1183         usb_kill_urb(port->write_urb);
1184 exit:
1185         spin_lock_irq(&priv->dp_port_lock);
1186         priv->dp_write_urb_in_use = 0;
1187         wake_up_interruptible(&priv->dp_close_wait);
1188         spin_unlock_irq(&priv->dp_port_lock);
1189         mutex_unlock(&port->serial->disc_mutex);
1190 }
1191
1192
1193 /*
1194  *  Digi Startup Device
1195  *
1196  *  Starts reads on all ports.  Must be called AFTER startup, with
1197  *  urbs initialized.  Returns 0 if successful, non-zero error otherwise.
1198  */
1199
1200 static int digi_startup_device(struct usb_serial *serial)
1201 {
1202         int i, ret = 0;
1203         struct digi_serial *serial_priv = usb_get_serial_data(serial);
1204         struct usb_serial_port *port;
1205
1206         /* be sure this happens exactly once */
1207         spin_lock(&serial_priv->ds_serial_lock);
1208         if (serial_priv->ds_device_started) {
1209                 spin_unlock(&serial_priv->ds_serial_lock);
1210                 return 0;
1211         }
1212         serial_priv->ds_device_started = 1;
1213         spin_unlock(&serial_priv->ds_serial_lock);
1214
1215         /* start reading from each bulk in endpoint for the device */
1216         /* set USB_DISABLE_SPD flag for write bulk urbs */
1217         for (i = 0; i < serial->type->num_ports + 1; i++) {
1218                 port = serial->port[i];
1219                 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
1220                 if (ret != 0) {
1221                         dev_err(&port->dev,
1222                                 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1223                                 __func__, ret, i);
1224                         break;
1225                 }
1226         }
1227         return ret;
1228 }
1229
1230 static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
1231 {
1232         struct digi_port *priv;
1233
1234         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1235         if (!priv)
1236                 return -ENOMEM;
1237
1238         spin_lock_init(&priv->dp_port_lock);
1239         priv->dp_port_num = port_num;
1240         init_waitqueue_head(&priv->dp_transmit_idle_wait);
1241         init_waitqueue_head(&priv->dp_flush_wait);
1242         init_waitqueue_head(&priv->dp_close_wait);
1243         INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
1244         priv->dp_port = port;
1245
1246         init_waitqueue_head(&port->write_wait);
1247
1248         usb_set_serial_port_data(port, priv);
1249
1250         return 0;
1251 }
1252
1253 static int digi_startup(struct usb_serial *serial)
1254 {
1255         struct digi_serial *serial_priv;
1256         int ret;
1257
1258         serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
1259         if (!serial_priv)
1260                 return -ENOMEM;
1261
1262         spin_lock_init(&serial_priv->ds_serial_lock);
1263         serial_priv->ds_oob_port_num = serial->type->num_ports;
1264         serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
1265
1266         ret = digi_port_init(serial_priv->ds_oob_port,
1267                                                 serial_priv->ds_oob_port_num);
1268         if (ret) {
1269                 kfree(serial_priv);
1270                 return ret;
1271         }
1272
1273         usb_set_serial_data(serial, serial_priv);
1274
1275         return 0;
1276 }
1277
1278
1279 static void digi_disconnect(struct usb_serial *serial)
1280 {
1281         int i;
1282
1283         /* stop reads and writes on all ports */
1284         for (i = 0; i < serial->type->num_ports + 1; i++) {
1285                 usb_kill_urb(serial->port[i]->read_urb);
1286                 usb_kill_urb(serial->port[i]->write_urb);
1287         }
1288 }
1289
1290
1291 static void digi_release(struct usb_serial *serial)
1292 {
1293         struct digi_serial *serial_priv;
1294         struct digi_port *priv;
1295
1296         serial_priv = usb_get_serial_data(serial);
1297
1298         priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
1299         kfree(priv);
1300
1301         kfree(serial_priv);
1302 }
1303
1304 static int digi_port_probe(struct usb_serial_port *port)
1305 {
1306         return digi_port_init(port, port->port_number);
1307 }
1308
1309 static int digi_port_remove(struct usb_serial_port *port)
1310 {
1311         struct digi_port *priv;
1312
1313         priv = usb_get_serial_port_data(port);
1314         kfree(priv);
1315
1316         return 0;
1317 }
1318
1319 static void digi_read_bulk_callback(struct urb *urb)
1320 {
1321         struct usb_serial_port *port = urb->context;
1322         struct digi_port *priv;
1323         struct digi_serial *serial_priv;
1324         int ret;
1325         int status = urb->status;
1326
1327         /* port sanity check, do not resubmit if port is not valid */
1328         if (port == NULL)
1329                 return;
1330         priv = usb_get_serial_port_data(port);
1331         if (priv == NULL) {
1332                 dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
1333                         __func__, status);
1334                 return;
1335         }
1336         if (port->serial == NULL ||
1337                 (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
1338                 dev_err(&port->dev, "%s: serial is bad or serial->private "
1339                         "is NULL, status=%d\n", __func__, status);
1340                 return;
1341         }
1342
1343         /* do not resubmit urb if it has any status error */
1344         if (status) {
1345                 dev_err(&port->dev,
1346                         "%s: nonzero read bulk status: status=%d, port=%d\n",
1347                         __func__, status, priv->dp_port_num);
1348                 return;
1349         }
1350
1351         /* handle oob or inb callback, do not resubmit if error */
1352         if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1353                 if (digi_read_oob_callback(urb) != 0)
1354                         return;
1355         } else {
1356                 if (digi_read_inb_callback(urb) != 0)
1357                         return;
1358         }
1359
1360         /* continue read */
1361         ret = usb_submit_urb(urb, GFP_ATOMIC);
1362         if (ret != 0 && ret != -EPERM) {
1363                 dev_err(&port->dev,
1364                         "%s: failed resubmitting urb, ret=%d, port=%d\n",
1365                         __func__, ret, priv->dp_port_num);
1366         }
1367
1368 }
1369
1370 /*
1371  *  Digi Read INB Callback
1372  *
1373  *  Digi Read INB Callback handles reads on the in band ports, sending
1374  *  the data on to the tty subsystem.  When called we know port and
1375  *  port->private are not NULL and port->serial has been validated.
1376  *  It returns 0 if successful, 1 if successful but the port is
1377  *  throttled, and -1 if the sanity checks failed.
1378  */
1379
1380 static int digi_read_inb_callback(struct urb *urb)
1381 {
1382         struct usb_serial_port *port = urb->context;
1383         struct digi_port *priv = usb_get_serial_port_data(port);
1384         int opcode = ((unsigned char *)urb->transfer_buffer)[0];
1385         int len = ((unsigned char *)urb->transfer_buffer)[1];
1386         int port_status = ((unsigned char *)urb->transfer_buffer)[2];
1387         unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
1388         int flag, throttled;
1389         int status = urb->status;
1390
1391         /* do not process callbacks on closed ports */
1392         /* but do continue the read chain */
1393         if (urb->status == -ENOENT)
1394                 return 0;
1395
1396         /* short/multiple packet check */
1397         if (urb->actual_length != len + 2) {
1398                 dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
1399                         "status=%d, port=%d, opcode=%d, len=%d, "
1400                         "actual_length=%d, status=%d\n", __func__, status,
1401                         priv->dp_port_num, opcode, len, urb->actual_length,
1402                         port_status);
1403                 return -1;
1404         }
1405
1406         spin_lock(&priv->dp_port_lock);
1407
1408         /* check for throttle; if set, do not resubmit read urb */
1409         /* indicate the read chain needs to be restarted on unthrottle */
1410         throttled = priv->dp_throttled;
1411         if (throttled)
1412                 priv->dp_throttle_restart = 1;
1413
1414         /* receive data */
1415         if (opcode == DIGI_CMD_RECEIVE_DATA) {
1416                 /* get flag from port_status */
1417                 flag = 0;
1418
1419                 /* overrun is special, not associated with a char */
1420                 if (port_status & DIGI_OVERRUN_ERROR)
1421                         tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1422
1423                 /* break takes precedence over parity, */
1424                 /* which takes precedence over framing errors */
1425                 if (port_status & DIGI_BREAK_ERROR)
1426                         flag = TTY_BREAK;
1427                 else if (port_status & DIGI_PARITY_ERROR)
1428                         flag = TTY_PARITY;
1429                 else if (port_status & DIGI_FRAMING_ERROR)
1430                         flag = TTY_FRAME;
1431
1432                 /* data length is len-1 (one byte of len is port_status) */
1433                 --len;
1434                 if (len > 0) {
1435                         tty_insert_flip_string_fixed_flag(&port->port, data,
1436                                         flag, len);
1437                         tty_flip_buffer_push(&port->port);
1438                 }
1439         }
1440         spin_unlock(&priv->dp_port_lock);
1441
1442         if (opcode == DIGI_CMD_RECEIVE_DISABLE)
1443                 dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
1444         else if (opcode != DIGI_CMD_RECEIVE_DATA)
1445                 dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
1446
1447         return throttled ? 1 : 0;
1448
1449 }
1450
1451
1452 /*
1453  *  Digi Read OOB Callback
1454  *
1455  *  Digi Read OOB Callback handles reads on the out of band port.
1456  *  When called we know port and port->private are not NULL and
1457  *  the port->serial is valid.  It returns 0 if successful, and
1458  *  -1 if the sanity checks failed.
1459  */
1460
1461 static int digi_read_oob_callback(struct urb *urb)
1462 {
1463
1464         struct usb_serial_port *port = urb->context;
1465         struct usb_serial *serial = port->serial;
1466         struct tty_struct *tty;
1467         struct digi_port *priv = usb_get_serial_port_data(port);
1468         int opcode, line, status, val;
1469         int i;
1470         unsigned int rts;
1471
1472         /* handle each oob command */
1473         for (i = 0; i < urb->actual_length - 3;) {
1474                 opcode = ((unsigned char *)urb->transfer_buffer)[i++];
1475                 line = ((unsigned char *)urb->transfer_buffer)[i++];
1476                 status = ((unsigned char *)urb->transfer_buffer)[i++];
1477                 val = ((unsigned char *)urb->transfer_buffer)[i++];
1478
1479                 dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
1480                         opcode, line, status, val);
1481
1482                 if (status != 0 || line >= serial->type->num_ports)
1483                         continue;
1484
1485                 port = serial->port[line];
1486
1487                 priv = usb_get_serial_port_data(port);
1488                 if (priv == NULL)
1489                         return -1;
1490
1491                 tty = tty_port_tty_get(&port->port);
1492
1493                 rts = 0;
1494                 if (tty)
1495                         rts = tty->termios.c_cflag & CRTSCTS;
1496
1497                 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
1498                         spin_lock(&priv->dp_port_lock);
1499                         /* convert from digi flags to termiox flags */
1500                         if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
1501                                 priv->dp_modem_signals |= TIOCM_CTS;
1502                                 /* port must be open to use tty struct */
1503                                 if (rts) {
1504                                         tty->hw_stopped = 0;
1505                                         tty_port_tty_wakeup(&port->port);
1506                                 }
1507                         } else {
1508                                 priv->dp_modem_signals &= ~TIOCM_CTS;
1509                                 /* port must be open to use tty struct */
1510                                 if (rts)
1511                                         tty->hw_stopped = 1;
1512                         }
1513                         if (val & DIGI_READ_INPUT_SIGNALS_DSR)
1514                                 priv->dp_modem_signals |= TIOCM_DSR;
1515                         else
1516                                 priv->dp_modem_signals &= ~TIOCM_DSR;
1517                         if (val & DIGI_READ_INPUT_SIGNALS_RI)
1518                                 priv->dp_modem_signals |= TIOCM_RI;
1519                         else
1520                                 priv->dp_modem_signals &= ~TIOCM_RI;
1521                         if (val & DIGI_READ_INPUT_SIGNALS_DCD)
1522                                 priv->dp_modem_signals |= TIOCM_CD;
1523                         else
1524                                 priv->dp_modem_signals &= ~TIOCM_CD;
1525
1526                         spin_unlock(&priv->dp_port_lock);
1527                 } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
1528                         spin_lock(&priv->dp_port_lock);
1529                         priv->dp_transmit_idle = 1;
1530                         wake_up_interruptible(&priv->dp_transmit_idle_wait);
1531                         spin_unlock(&priv->dp_port_lock);
1532                 } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
1533                         wake_up_interruptible(&priv->dp_flush_wait);
1534                 }
1535                 tty_kref_put(tty);
1536         }
1537         return 0;
1538
1539 }
1540
1541 module_usb_serial_driver(serial_drivers, id_table_combined);
1542
1543 MODULE_AUTHOR(DRIVER_AUTHOR);
1544 MODULE_DESCRIPTION(DRIVER_DESC);
1545 MODULE_LICENSE("GPL");