Pileus Git - ~andy/linux/blob - drivers/usb/phy/phy-twl6030-usb.c

   1 /*
   2  * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
   3  *
   4  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * Author: Hema HK <hemahk@ti.com>
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/io.h>
  28 #include <linux/usb/musb-omap.h>
  29 #include <linux/usb/phy_companion.h>
  30 #include <linux/usb/omap_usb.h>
  31 #include <linux/i2c/twl.h>
  32 #include <linux/regulator/consumer.h>
  33 #include <linux/err.h>
  34 #include <linux/slab.h>
  35 #include <linux/delay.h>
  36 #include <linux/of.h>
  37
  38 /* usb register definitions */
  39 #define USB_VENDOR_ID_LSB               0x00
  40 #define USB_VENDOR_ID_MSB               0x01
  41 #define USB_PRODUCT_ID_LSB              0x02
  42 #define USB_PRODUCT_ID_MSB              0x03
  43 #define USB_VBUS_CTRL_SET               0x04
  44 #define USB_VBUS_CTRL_CLR               0x05
  45 #define USB_ID_CTRL_SET                 0x06
  46 #define USB_ID_CTRL_CLR                 0x07
  47 #define USB_VBUS_INT_SRC                0x08
  48 #define USB_VBUS_INT_LATCH_SET          0x09
  49 #define USB_VBUS_INT_LATCH_CLR          0x0A
  50 #define USB_VBUS_INT_EN_LO_SET          0x0B
  51 #define USB_VBUS_INT_EN_LO_CLR          0x0C
  52 #define USB_VBUS_INT_EN_HI_SET          0x0D
  53 #define USB_VBUS_INT_EN_HI_CLR          0x0E
  54 #define USB_ID_INT_SRC                  0x0F
  55 #define USB_ID_INT_LATCH_SET            0x10
  56 #define USB_ID_INT_LATCH_CLR            0x11
  57
  58 #define USB_ID_INT_EN_LO_SET            0x12
  59 #define USB_ID_INT_EN_LO_CLR            0x13
  60 #define USB_ID_INT_EN_HI_SET            0x14
  61 #define USB_ID_INT_EN_HI_CLR            0x15
  62 #define USB_OTG_ADP_CTRL                0x16
  63 #define USB_OTG_ADP_HIGH                0x17
  64 #define USB_OTG_ADP_LOW                 0x18
  65 #define USB_OTG_ADP_RISE                0x19
  66 #define USB_OTG_REVISION                0x1A
  67
  68 /* to be moved to LDO */
  69 #define TWL6030_MISC2                   0xE5
  70 #define TWL6030_CFG_LDO_PD2             0xF5
  71 #define TWL6030_BACKUP_REG              0xFA
  72
  73 #define STS_HW_CONDITIONS               0x21
  74
  75 /* In module TWL6030_MODULE_PM_MASTER */
  76 #define STS_HW_CONDITIONS               0x21
  77 #define STS_USB_ID                      BIT(2)
  78
  79 /* In module TWL6030_MODULE_PM_RECEIVER */
  80 #define VUSB_CFG_TRANS                  0x71
  81 #define VUSB_CFG_STATE                  0x72
  82 #define VUSB_CFG_VOLTAGE                0x73
  83
  84 /* in module TWL6030_MODULE_MAIN_CHARGE */
  85
  86 #define CHARGERUSB_CTRL1                0x8
  87
  88 #define CONTROLLER_STAT1                0x03
  89 #define VBUS_DET                        BIT(2)
  90
  91 struct twl6030_usb {
  92         struct phy_companion    comparator;
  93         struct device           *dev;
  94
  95         /* for vbus reporting with irqs disabled */
  96         spinlock_t              lock;
  97
  98         struct regulator                *usb3v3;
  99
 100         /* used to set vbus, in atomic path */
 101         struct work_struct      set_vbus_work;
 102
 103         int                     irq1;
 104         int                     irq2;
 105         enum omap_musb_vbus_id_status linkstat;
 106         u8                      asleep;
 107         bool                    irq_enabled;
 108         bool                    vbus_enable;
 109         const char              *regulator;
 110 };
 111
 112 #define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
 113
 114 /*-------------------------------------------------------------------------*/
 115
 116 static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
 117                                                 u8 data, u8 address)
 118 {
 119         int ret = 0;
 120
 121         ret = twl_i2c_write_u8(module, data, address);
 122         if (ret < 0)
 123                 dev_err(twl->dev,
 124                         "Write[0x%x] Error %d\n", address, ret);
 125         return ret;
 126 }
 127
 128 static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
 129 {
 130         u8 data;
 131         int ret;
 132
 133         ret = twl_i2c_read_u8(module, &data, address);
 134         if (ret >= 0)
 135                 ret = data;
 136         else
 137                 dev_err(twl->dev,
 138                         "readb[0x%x,0x%x] Error %d\n",
 139                                         module, address, ret);
 140         return ret;
 141 }
 142
 143 static int twl6030_start_srp(struct phy_companion *comparator)
 144 {
 145         struct twl6030_usb *twl = comparator_to_twl(comparator);
 146
 147         twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
 148         twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
 149
 150         mdelay(100);
 151         twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
 152
 153         return 0;
 154 }
 155
 156 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
 157 {
 158         /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
 159         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
 160
 161         /* Program CFG_LDO_PD2 register and set VUSB bit */
 162         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
 163
 164         /* Program MISC2 register and set bit VUSB_IN_VBAT */
 165         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
 166
 167         twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
 168         if (IS_ERR(twl->usb3v3))
 169                 return -ENODEV;
 170
 171         /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
 172         twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
 173
 174         /*
 175          * Program the USB_ID_CTRL_SET register to enable GND drive
 176          * and the ID comparators
 177          */
 178         twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
 179
 180         return 0;
 181 }
 182
 183 static ssize_t twl6030_usb_vbus_show(struct device *dev,
 184                         struct device_attribute *attr, char *buf)
 185 {
 186         struct twl6030_usb *twl = dev_get_drvdata(dev);
 187         unsigned long flags;
 188         int ret = -EINVAL;
 189
 190         spin_lock_irqsave(&twl->lock, flags);
 191
 192         switch (twl->linkstat) {
 193         case OMAP_MUSB_VBUS_VALID:
 194                ret = snprintf(buf, PAGE_SIZE, "vbus\n");
 195                break;
 196         case OMAP_MUSB_ID_GROUND:
 197                ret = snprintf(buf, PAGE_SIZE, "id\n");
 198                break;
 199         case OMAP_MUSB_VBUS_OFF:
 200                ret = snprintf(buf, PAGE_SIZE, "none\n");
 201                break;
 202         default:
 203                ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
 204         }
 205         spin_unlock_irqrestore(&twl->lock, flags);
 206
 207         return ret;
 208 }
 209 static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
 210
 211 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 212 {
 213         struct twl6030_usb *twl = _twl;
 214         enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 215         u8 vbus_state, hw_state;
 216         int ret;
 217
 218         hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 219
 220         vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
 221                                                 CONTROLLER_STAT1);
 222         if (!(hw_state & STS_USB_ID)) {
 223                 if (vbus_state & VBUS_DET) {
 224                         ret = regulator_enable(twl->usb3v3);
 225                         if (ret)
 226                                 dev_err(twl->dev, "Failed to enable usb3v3\n");
 227
 228                         twl->asleep = 1;
 229                         status = OMAP_MUSB_VBUS_VALID;
 230                         twl->linkstat = status;
 231                         omap_musb_mailbox(status);
 232                 } else {
 233                         if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
 234                                 status = OMAP_MUSB_VBUS_OFF;
 235                                 twl->linkstat = status;
 236                                 omap_musb_mailbox(status);
 237                                 if (twl->asleep) {
 238                                         regulator_disable(twl->usb3v3);
 239                                         twl->asleep = 0;
 240                                 }
 241                         }
 242                 }
 243         }
 244         sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 245
 246         return IRQ_HANDLED;
 247 }
 248
 249 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 250 {
 251         struct twl6030_usb *twl = _twl;
 252         enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 253         u8 hw_state;
 254         int ret;
 255
 256         hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 257
 258         if (hw_state & STS_USB_ID) {
 259                 ret = regulator_enable(twl->usb3v3);
 260                 if (ret)
 261                         dev_err(twl->dev, "Failed to enable usb3v3\n");
 262
 263                 twl->asleep = 1;
 264                 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
 265                 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
 266                 status = OMAP_MUSB_ID_GROUND;
 267                 twl->linkstat = status;
 268                 omap_musb_mailbox(status);
 269         } else  {
 270                 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
 271                 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 272         }
 273         twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
 274
 275         return IRQ_HANDLED;
 276 }
 277
 278 static int twl6030_enable_irq(struct twl6030_usb *twl)
 279 {
 280         twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 281         twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
 282         twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
 283
 284         twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
 285                                 REG_INT_MSK_LINE_C);
 286         twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
 287                                 REG_INT_MSK_STS_C);
 288         twl6030_usb_irq(twl->irq2, twl);
 289         twl6030_usbotg_irq(twl->irq1, twl);
 290
 291         return 0;
 292 }
 293
 294 static void otg_set_vbus_work(struct work_struct *data)
 295 {
 296         struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
 297                                                                 set_vbus_work);
 298
 299         /*
 300          * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
 301          * register. This enables boost mode.
 302          */
 303
 304         if (twl->vbus_enable)
 305                 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
 306                                                         CHARGERUSB_CTRL1);
 307         else
 308                 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
 309                                                         CHARGERUSB_CTRL1);
 310 }
 311
 312 static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
 313 {
 314         struct twl6030_usb *twl = comparator_to_twl(comparator);
 315
 316         twl->vbus_enable = enabled;
 317         schedule_work(&twl->set_vbus_work);
 318
 319         return 0;
 320 }
 321
 322 static int twl6030_usb_probe(struct platform_device *pdev)
 323 {
 324         u32 ret;
 325         struct twl6030_usb      *twl;
 326         int                     status, err;
 327         struct device_node      *np = pdev->dev.of_node;
 328         struct device           *dev = &pdev->dev;
 329         struct twl4030_usb_data *pdata = dev_get_platdata(dev);
 330
 331         twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
 332         if (!twl)
 333                 return -ENOMEM;
 334
 335         twl->dev                = &pdev->dev;
 336         twl->irq1               = platform_get_irq(pdev, 0);
 337         twl->irq2               = platform_get_irq(pdev, 1);
 338         twl->linkstat           = OMAP_MUSB_UNKNOWN;
 339
 340         twl->comparator.set_vbus        = twl6030_set_vbus;
 341         twl->comparator.start_srp       = twl6030_start_srp;
 342
 343         ret = omap_usb2_set_comparator(&twl->comparator);
 344         if (ret == -ENODEV) {
 345                 dev_info(&pdev->dev, "phy not ready, deferring probe");
 346                 return -EPROBE_DEFER;
 347         }
 348
 349         if (np) {
 350                 twl->regulator = "usb";
 351         } else if (pdata) {
 352                 if (pdata->features & TWL6032_SUBCLASS)
 353                         twl->regulator = "ldousb";
 354                 else
 355                         twl->regulator = "vusb";
 356         } else {
 357                 dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
 358                 return -EINVAL;
 359         }
 360
 361         /* init spinlock for workqueue */
 362         spin_lock_init(&twl->lock);
 363
 364         err = twl6030_usb_ldo_init(twl);
 365         if (err) {
 366                 dev_err(&pdev->dev, "ldo init failed\n");
 367                 return err;
 368         }
 369
 370         platform_set_drvdata(pdev, twl);
 371         if (device_create_file(&pdev->dev, &dev_attr_vbus))
 372                 dev_warn(&pdev->dev, "could not create sysfs file\n");
 373
 374         INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
 375
 376         twl->irq_enabled = true;
 377         status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
 378                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 379                         "twl6030_usb", twl);
 380         if (status < 0) {
 381                 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 382                         twl->irq1, status);
 383                 device_remove_file(twl->dev, &dev_attr_vbus);
 384                 return status;
 385         }
 386
 387         status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
 388                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 389                         "twl6030_usb", twl);
 390         if (status < 0) {
 391                 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 392                         twl->irq2, status);
 393                 free_irq(twl->irq1, twl);
 394                 device_remove_file(twl->dev, &dev_attr_vbus);
 395                 return status;
 396         }
 397
 398         twl->asleep = 0;
 399         twl6030_enable_irq(twl);
 400         dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 401
 402         return 0;
 403 }
 404
 405 static int twl6030_usb_remove(struct platform_device *pdev)
 406 {
 407         struct twl6030_usb *twl = platform_get_drvdata(pdev);
 408
 409         twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
 410                 REG_INT_MSK_LINE_C);
 411         twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
 412                         REG_INT_MSK_STS_C);
 413         free_irq(twl->irq1, twl);
 414         free_irq(twl->irq2, twl);
 415         regulator_put(twl->usb3v3);
 416         device_remove_file(twl->dev, &dev_attr_vbus);
 417         cancel_work_sync(&twl->set_vbus_work);
 418
 419         return 0;
 420 }
 421
 422 #ifdef CONFIG_OF
 423 static const struct of_device_id twl6030_usb_id_table[] = {
 424         { .compatible = "ti,twl6030-usb" },
 425         {}
 426 };
 427 MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
 428 #endif
 429
 430 static struct platform_driver twl6030_usb_driver = {
 431         .probe          = twl6030_usb_probe,
 432         .remove         = twl6030_usb_remove,
 433         .driver         = {
 434                 .name   = "twl6030_usb",
 435                 .owner  = THIS_MODULE,
 436                 .of_match_table = of_match_ptr(twl6030_usb_id_table),
 437         },
 438 };
 439
 440 static int __init twl6030_usb_init(void)
 441 {
 442         return platform_driver_register(&twl6030_usb_driver);
 443 }
 444 subsys_initcall(twl6030_usb_init);
 445
 446 static void __exit twl6030_usb_exit(void)
 447 {
 448         platform_driver_unregister(&twl6030_usb_driver);
 449 }
 450 module_exit(twl6030_usb_exit);
 451
 452 MODULE_ALIAS("platform:twl6030_usb");
 453 MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
 454 MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
 455 MODULE_LICENSE("GPL");