Pileus Git - ~andy/linux/blob - drivers/usb/host/xhci-hub.c

   1 /*
   2  * xHCI host controller driver
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/gfp.h>
  24 #include <asm/unaligned.h>
  25
  26 #include "xhci.h"
  27
  28 #define PORT_WAKE_BITS  (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
  29 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
  30                          PORT_RC | PORT_PLC | PORT_PE)
  31
  32 /* usb 1.1 root hub device descriptor */
  33 static u8 usb_bos_descriptor [] = {
  34         USB_DT_BOS_SIZE,                /*  __u8 bLength, 5 bytes */
  35         USB_DT_BOS,                     /*  __u8 bDescriptorType */
  36         0x0F, 0x00,                     /*  __le16 wTotalLength, 15 bytes */
  37         0x1,                            /*  __u8 bNumDeviceCaps */
  38         /* First device capability */
  39         USB_DT_USB_SS_CAP_SIZE,         /*  __u8 bLength, 10 bytes */
  40         USB_DT_DEVICE_CAPABILITY,       /* Device Capability */
  41         USB_SS_CAP_TYPE,                /* bDevCapabilityType, SUPERSPEED_USB */
  42         0x00,                           /* bmAttributes, LTM off by default */
  43         USB_5GBPS_OPERATION, 0x00,      /* wSpeedsSupported, 5Gbps only */
  44         0x03,                           /* bFunctionalitySupport,
  45                                            USB 3.0 speed only */
  46         0x00,                           /* bU1DevExitLat, set later. */
  47         0x00, 0x00                      /* __le16 bU2DevExitLat, set later. */
  48 };
  49
  50
  51 static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
  52                 struct usb_hub_descriptor *desc, int ports)
  53 {
  54         u16 temp;
  55
  56         desc->bPwrOn2PwrGood = 10;      /* xhci section 5.4.9 says 20ms max */
  57         desc->bHubContrCurrent = 0;
  58
  59         desc->bNbrPorts = ports;
  60         temp = 0;
  61         /* Bits 1:0 - support per-port power switching, or power always on */
  62         if (HCC_PPC(xhci->hcc_params))
  63                 temp |= HUB_CHAR_INDV_PORT_LPSM;
  64         else
  65                 temp |= HUB_CHAR_NO_LPSM;
  66         /* Bit  2 - root hubs are not part of a compound device */
  67         /* Bits 4:3 - individual port over current protection */
  68         temp |= HUB_CHAR_INDV_PORT_OCPM;
  69         /* Bits 6:5 - no TTs in root ports */
  70         /* Bit  7 - no port indicators */
  71         desc->wHubCharacteristics = cpu_to_le16(temp);
  72 }
  73
  74 /* Fill in the USB 2.0 roothub descriptor */
  75 static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
  76                 struct usb_hub_descriptor *desc)
  77 {
  78         int ports;
  79         u16 temp;
  80         __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
  81         u32 portsc;
  82         unsigned int i;
  83
  84         ports = xhci->num_usb2_ports;
  85
  86         xhci_common_hub_descriptor(xhci, desc, ports);
  87         desc->bDescriptorType = USB_DT_HUB;
  88         temp = 1 + (ports / 8);
  89         desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
  90
  91         /* The Device Removable bits are reported on a byte granularity.
  92          * If the port doesn't exist within that byte, the bit is set to 0.
  93          */
  94         memset(port_removable, 0, sizeof(port_removable));
  95         for (i = 0; i < ports; i++) {
  96                 portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
  97                 /* If a device is removable, PORTSC reports a 0, same as in the
  98                  * hub descriptor DeviceRemovable bits.
  99                  */
 100                 if (portsc & PORT_DEV_REMOVE)
 101                         /* This math is hairy because bit 0 of DeviceRemovable
 102                          * is reserved, and bit 1 is for port 1, etc.
 103                          */
 104                         port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
 105         }
 106
 107         /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
 108          * ports on it.  The USB 2.0 specification says that there are two
 109          * variable length fields at the end of the hub descriptor:
 110          * DeviceRemovable and PortPwrCtrlMask.  But since we can have less than
 111          * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
 112          * to set PortPwrCtrlMask bits.  PortPwrCtrlMask must always be set to
 113          * 0xFF, so we initialize the both arrays (DeviceRemovable and
 114          * PortPwrCtrlMask) to 0xFF.  Then we set the DeviceRemovable for each
 115          * set of ports that actually exist.
 116          */
 117         memset(desc->u.hs.DeviceRemovable, 0xff,
 118                         sizeof(desc->u.hs.DeviceRemovable));
 119         memset(desc->u.hs.PortPwrCtrlMask, 0xff,
 120                         sizeof(desc->u.hs.PortPwrCtrlMask));
 121
 122         for (i = 0; i < (ports + 1 + 7) / 8; i++)
 123                 memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
 124                                 sizeof(__u8));
 125 }
 126
 127 /* Fill in the USB 3.0 roothub descriptor */
 128 static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 129                 struct usb_hub_descriptor *desc)
 130 {
 131         int ports;
 132         u16 port_removable;
 133         u32 portsc;
 134         unsigned int i;
 135
 136         ports = xhci->num_usb3_ports;
 137         xhci_common_hub_descriptor(xhci, desc, ports);
 138         desc->bDescriptorType = USB_DT_SS_HUB;
 139         desc->bDescLength = USB_DT_SS_HUB_SIZE;
 140
 141         /* header decode latency should be zero for roothubs,
 142          * see section 4.23.5.2.
 143          */
 144         desc->u.ss.bHubHdrDecLat = 0;
 145         desc->u.ss.wHubDelay = 0;
 146
 147         port_removable = 0;
 148         /* bit 0 is reserved, bit 1 is for port 1, etc. */
 149         for (i = 0; i < ports; i++) {
 150                 portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
 151                 if (portsc & PORT_DEV_REMOVE)
 152                         port_removable |= 1 << (i + 1);
 153         }
 154         memset(&desc->u.ss.DeviceRemovable,
 155                         (__force __u16) cpu_to_le16(port_removable),
 156                         sizeof(__u16));
 157 }
 158
 159 static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 160                 struct usb_hub_descriptor *desc)
 161 {
 162
 163         if (hcd->speed == HCD_USB3)
 164                 xhci_usb3_hub_descriptor(hcd, xhci, desc);
 165         else
 166                 xhci_usb2_hub_descriptor(hcd, xhci, desc);
 167
 168 }
 169
 170 static unsigned int xhci_port_speed(unsigned int port_status)
 171 {
 172         if (DEV_LOWSPEED(port_status))
 173                 return USB_PORT_STAT_LOW_SPEED;
 174         if (DEV_HIGHSPEED(port_status))
 175                 return USB_PORT_STAT_HIGH_SPEED;
 176         /*
 177          * FIXME: Yes, we should check for full speed, but the core uses that as
 178          * a default in portspeed() in usb/core/hub.c (which is the only place
 179          * USB_PORT_STAT_*_SPEED is used).
 180          */
 181         return 0;
 182 }
 183
 184 /*
 185  * These bits are Read Only (RO) and should be saved and written to the
 186  * registers: 0, 3, 10:13, 30
 187  * connect status, over-current status, port speed, and device removable.
 188  * connect status and port speed are also sticky - meaning they're in
 189  * the AUX well and they aren't changed by a hot, warm, or cold reset.
 190  */
 191 #define XHCI_PORT_RO    ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
 192 /*
 193  * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
 194  * bits 5:8, 9, 14:15, 25:27
 195  * link state, port power, port indicator state, "wake on" enable state
 196  */
 197 #define XHCI_PORT_RWS   ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
 198 /*
 199  * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
 200  * bit 4 (port reset)
 201  */
 202 #define XHCI_PORT_RW1S  ((1<<4))
 203 /*
 204  * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
 205  * bits 1, 17, 18, 19, 20, 21, 22, 23
 206  * port enable/disable, and
 207  * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
 208  * over-current, reset, link state, and L1 change
 209  */
 210 #define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
 211 /*
 212  * Bit 16 is RW, and writing a '1' to it causes the link state control to be
 213  * latched in
 214  */
 215 #define XHCI_PORT_RW    ((1<<16))
 216 /*
 217  * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
 218  * bits 2, 24, 28:31
 219  */
 220 #define XHCI_PORT_RZ    ((1<<2) | (1<<24) | (0xf<<28))
 221
 222 /*
 223  * Given a port state, this function returns a value that would result in the
 224  * port being in the same state, if the value was written to the port status
 225  * control register.
 226  * Save Read Only (RO) bits and save read/write bits where
 227  * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
 228  * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
 229  */
 230 u32 xhci_port_state_to_neutral(u32 state)
 231 {
 232         /* Save read-only status and port state */
 233         return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
 234 }
 235
 236 /*
 237  * find slot id based on port number.
 238  * @port: The one-based port number from one of the two split roothubs.
 239  */
 240 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 241                 u16 port)
 242 {
 243         int slot_id;
 244         int i;
 245         enum usb_device_speed speed;
 246
 247         slot_id = 0;
 248         for (i = 0; i < MAX_HC_SLOTS; i++) {
 249                 if (!xhci->devs[i])
 250                         continue;
 251                 speed = xhci->devs[i]->udev->speed;
 252                 if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
 253                                 && xhci->devs[i]->fake_port == port) {
 254                         slot_id = i;
 255                         break;
 256                 }
 257         }
 258
 259         return slot_id;
 260 }
 261
 262 /*
 263  * Stop device
 264  * It issues stop endpoint command for EP 0 to 30. And wait the last command
 265  * to complete.
 266  * suspend will set to 1, if suspend bit need to set in command.
 267  */
 268 static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 269 {
 270         struct xhci_virt_device *virt_dev;
 271         struct xhci_command *cmd;
 272         unsigned long flags;
 273         int timeleft;
 274         int ret;
 275         int i;
 276
 277         ret = 0;
 278         virt_dev = xhci->devs[slot_id];
 279         cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
 280         if (!cmd) {
 281                 xhci_dbg(xhci, "Couldn't allocate command structure.\n");
 282                 return -ENOMEM;
 283         }
 284
 285         spin_lock_irqsave(&xhci->lock, flags);
 286         for (i = LAST_EP_INDEX; i > 0; i--) {
 287                 if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
 288                         xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
 289         }
 290         cmd->command_trb = xhci->cmd_ring->enqueue;
 291         list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
 292         xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
 293         xhci_ring_cmd_db(xhci);
 294         spin_unlock_irqrestore(&xhci->lock, flags);
 295
 296         /* Wait for last stop endpoint command to finish */
 297         timeleft = wait_for_completion_interruptible_timeout(
 298                         cmd->completion,
 299                         USB_CTRL_SET_TIMEOUT);
 300         if (timeleft <= 0) {
 301                 xhci_warn(xhci, "%s while waiting for stop endpoint command\n",
 302                                 timeleft == 0 ? "Timeout" : "Signal");
 303                 spin_lock_irqsave(&xhci->lock, flags);
 304                 /* The timeout might have raced with the event ring handler, so
 305                  * only delete from the list if the item isn't poisoned.
 306                  */
 307                 if (cmd->cmd_list.next != LIST_POISON1)
 308                         list_del(&cmd->cmd_list);
 309                 spin_unlock_irqrestore(&xhci->lock, flags);
 310                 ret = -ETIME;
 311                 goto command_cleanup;
 312         }
 313
 314 command_cleanup:
 315         xhci_free_command(xhci, cmd);
 316         return ret;
 317 }
 318
 319 /*
 320  * Ring device, it rings the all doorbells unconditionally.
 321  */
 322 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 323 {
 324         int i;
 325
 326         for (i = 0; i < LAST_EP_INDEX + 1; i++)
 327                 if (xhci->devs[slot_id]->eps[i].ring &&
 328                     xhci->devs[slot_id]->eps[i].ring->dequeue)
 329                         xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
 330
 331         return;
 332 }
 333
 334 static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 335                 u16 wIndex, __le32 __iomem *addr, u32 port_status)
 336 {
 337         /* Don't allow the USB core to disable SuperSpeed ports. */
 338         if (hcd->speed == HCD_USB3) {
 339                 xhci_dbg(xhci, "Ignoring request to disable "
 340                                 "SuperSpeed port.\n");
 341                 return;
 342         }
 343
 344         /* Write 1 to disable the port */
 345         xhci_writel(xhci, port_status | PORT_PE, addr);
 346         port_status = xhci_readl(xhci, addr);
 347         xhci_dbg(xhci, "disable port, actual port %d status  = 0x%x\n",
 348                         wIndex, port_status);
 349 }
 350
 351 static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 352                 u16 wIndex, __le32 __iomem *addr, u32 port_status)
 353 {
 354         char *port_change_bit;
 355         u32 status;
 356
 357         switch (wValue) {
 358         case USB_PORT_FEAT_C_RESET:
 359                 status = PORT_RC;
 360                 port_change_bit = "reset";
 361                 break;
 362         case USB_PORT_FEAT_C_BH_PORT_RESET:
 363                 status = PORT_WRC;
 364                 port_change_bit = "warm(BH) reset";
 365                 break;
 366         case USB_PORT_FEAT_C_CONNECTION:
 367                 status = PORT_CSC;
 368                 port_change_bit = "connect";
 369                 break;
 370         case USB_PORT_FEAT_C_OVER_CURRENT:
 371                 status = PORT_OCC;
 372                 port_change_bit = "over-current";
 373                 break;
 374         case USB_PORT_FEAT_C_ENABLE:
 375                 status = PORT_PEC;
 376                 port_change_bit = "enable/disable";
 377                 break;
 378         case USB_PORT_FEAT_C_SUSPEND:
 379                 status = PORT_PLC;
 380                 port_change_bit = "suspend/resume";
 381                 break;
 382         case USB_PORT_FEAT_C_PORT_LINK_STATE:
 383                 status = PORT_PLC;
 384                 port_change_bit = "link state";
 385                 break;
 386         default:
 387                 /* Should never happen */
 388                 return;
 389         }
 390         /* Change bits are all write 1 to clear */
 391         xhci_writel(xhci, port_status | status, addr);
 392         port_status = xhci_readl(xhci, addr);
 393         xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
 394                         port_change_bit, wIndex, port_status);
 395 }
 396
 397 static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
 398 {
 399         int max_ports;
 400         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 401
 402         if (hcd->speed == HCD_USB3) {
 403                 max_ports = xhci->num_usb3_ports;
 404                 *port_array = xhci->usb3_ports;
 405         } else {
 406                 max_ports = xhci->num_usb2_ports;
 407                 *port_array = xhci->usb2_ports;
 408         }
 409
 410         return max_ports;
 411 }
 412
 413 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 414                                 int port_id, u32 link_state)
 415 {
 416         u32 temp;
 417
 418         temp = xhci_readl(xhci, port_array[port_id]);
 419         temp = xhci_port_state_to_neutral(temp);
 420         temp &= ~PORT_PLS_MASK;
 421         temp |= PORT_LINK_STROBE | link_state;
 422         xhci_writel(xhci, temp, port_array[port_id]);
 423 }
 424
 425 void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
 426                 __le32 __iomem **port_array, int port_id, u16 wake_mask)
 427 {
 428         u32 temp;
 429
 430         temp = xhci_readl(xhci, port_array[port_id]);
 431         temp = xhci_port_state_to_neutral(temp);
 432
 433         if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
 434                 temp |= PORT_WKCONN_E;
 435         else
 436                 temp &= ~PORT_WKCONN_E;
 437
 438         if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
 439                 temp |= PORT_WKDISC_E;
 440         else
 441                 temp &= ~PORT_WKDISC_E;
 442
 443         if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
 444                 temp |= PORT_WKOC_E;
 445         else
 446                 temp &= ~PORT_WKOC_E;
 447
 448         xhci_writel(xhci, temp, port_array[port_id]);
 449 }
 450
 451 /* Test and clear port RWC bit */
 452 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 453                                 int port_id, u32 port_bit)
 454 {
 455         u32 temp;
 456
 457         temp = xhci_readl(xhci, port_array[port_id]);
 458         if (temp & port_bit) {
 459                 temp = xhci_port_state_to_neutral(temp);
 460                 temp |= port_bit;
 461                 xhci_writel(xhci, temp, port_array[port_id]);
 462         }
 463 }
 464
 465 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 466                 u16 wIndex, char *buf, u16 wLength)
 467 {
 468         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 469         int max_ports;
 470         unsigned long flags;
 471         u32 temp, status;
 472         int retval = 0;
 473         __le32 __iomem **port_array;
 474         int slot_id;
 475         struct xhci_bus_state *bus_state;
 476         u16 link_state = 0;
 477         u16 wake_mask = 0;
 478         u16 timeout = 0;
 479
 480         max_ports = xhci_get_ports(hcd, &port_array);
 481         bus_state = &xhci->bus_state[hcd_index(hcd)];
 482
 483         spin_lock_irqsave(&xhci->lock, flags);
 484         switch (typeReq) {
 485         case GetHubStatus:
 486                 /* No power source, over-current reported per port */
 487                 memset(buf, 0, 4);
 488                 break;
 489         case GetHubDescriptor:
 490                 /* Check to make sure userspace is asking for the USB 3.0 hub
 491                  * descriptor for the USB 3.0 roothub.  If not, we stall the
 492                  * endpoint, like external hubs do.
 493                  */
 494                 if (hcd->speed == HCD_USB3 &&
 495                                 (wLength < USB_DT_SS_HUB_SIZE ||
 496                                  wValue != (USB_DT_SS_HUB << 8))) {
 497                         xhci_dbg(xhci, "Wrong hub descriptor type for "
 498                                         "USB 3.0 roothub.\n");
 499                         goto error;
 500                 }
 501                 xhci_hub_descriptor(hcd, xhci,
 502                                 (struct usb_hub_descriptor *) buf);
 503                 break;
 504         case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 505                 if ((wValue & 0xff00) != (USB_DT_BOS << 8))
 506                         goto error;
 507
 508                 if (hcd->speed != HCD_USB3)
 509                         goto error;
 510
 511                 memcpy(buf, &usb_bos_descriptor,
 512                                 USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
 513                 temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
 514                 buf[12] = HCS_U1_LATENCY(temp);
 515                 put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
 516
 517                 spin_unlock_irqrestore(&xhci->lock, flags);
 518                 return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
 519         case GetPortStatus:
 520                 if (!wIndex || wIndex > max_ports)
 521                         goto error;
 522                 wIndex--;
 523                 status = 0;
 524                 temp = xhci_readl(xhci, port_array[wIndex]);
 525                 if (temp == 0xffffffff) {
 526                         retval = -ENODEV;
 527                         break;
 528                 }
 529                 xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
 530
 531                 /* wPortChange bits */
 532                 if (temp & PORT_CSC)
 533                         status |= USB_PORT_STAT_C_CONNECTION << 16;
 534                 if (temp & PORT_PEC)
 535                         status |= USB_PORT_STAT_C_ENABLE << 16;
 536                 if ((temp & PORT_OCC))
 537                         status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 538                 if ((temp & PORT_RC))
 539                         status |= USB_PORT_STAT_C_RESET << 16;
 540                 /* USB3.0 only */
 541                 if (hcd->speed == HCD_USB3) {
 542                         if ((temp & PORT_PLC))
 543                                 status |= USB_PORT_STAT_C_LINK_STATE << 16;
 544                         if ((temp & PORT_WRC))
 545                                 status |= USB_PORT_STAT_C_BH_RESET << 16;
 546                 }
 547
 548                 if (hcd->speed != HCD_USB3) {
 549                         if ((temp & PORT_PLS_MASK) == XDEV_U3
 550                                         && (temp & PORT_POWER))
 551                                 status |= USB_PORT_STAT_SUSPEND;
 552                 }
 553                 if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
 554                                 !DEV_SUPERSPEED(temp)) {
 555                         if ((temp & PORT_RESET) || !(temp & PORT_PE))
 556                                 goto error;
 557                         if (time_after_eq(jiffies,
 558                                         bus_state->resume_done[wIndex])) {
 559                                 xhci_dbg(xhci, "Resume USB2 port %d\n",
 560                                         wIndex + 1);
 561                                 bus_state->resume_done[wIndex] = 0;
 562                                 clear_bit(wIndex, &bus_state->resuming_ports);
 563                                 xhci_set_link_state(xhci, port_array, wIndex,
 564                                                         XDEV_U0);
 565                                 xhci_dbg(xhci, "set port %d resume\n",
 566                                         wIndex + 1);
 567                                 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 568                                                                  wIndex + 1);
 569                                 if (!slot_id) {
 570                                         xhci_dbg(xhci, "slot_id is zero\n");
 571                                         goto error;
 572                                 }
 573                                 xhci_ring_device(xhci, slot_id);
 574                                 bus_state->port_c_suspend |= 1 << wIndex;
 575                                 bus_state->suspended_ports &= ~(1 << wIndex);
 576                         } else {
 577                                 /*
 578                                  * The resume has been signaling for less than
 579                                  * 20ms. Report the port status as SUSPEND,
 580                                  * let the usbcore check port status again
 581                                  * and clear resume signaling later.
 582                                  */
 583                                 status |= USB_PORT_STAT_SUSPEND;
 584                         }
 585                 }
 586                 if ((temp & PORT_PLS_MASK) == XDEV_U0
 587                         && (temp & PORT_POWER)
 588                         && (bus_state->suspended_ports & (1 << wIndex))) {
 589                         bus_state->suspended_ports &= ~(1 << wIndex);
 590                         if (hcd->speed != HCD_USB3)
 591                                 bus_state->port_c_suspend |= 1 << wIndex;
 592                 }
 593                 if (temp & PORT_CONNECT) {
 594                         status |= USB_PORT_STAT_CONNECTION;
 595                         status |= xhci_port_speed(temp);
 596                 }
 597                 if (temp & PORT_PE)
 598                         status |= USB_PORT_STAT_ENABLE;
 599                 if (temp & PORT_OC)
 600                         status |= USB_PORT_STAT_OVERCURRENT;
 601                 if (temp & PORT_RESET)
 602                         status |= USB_PORT_STAT_RESET;
 603                 if (temp & PORT_POWER) {
 604                         if (hcd->speed == HCD_USB3)
 605                                 status |= USB_SS_PORT_STAT_POWER;
 606                         else
 607                                 status |= USB_PORT_STAT_POWER;
 608                 }
 609                 /* Port Link State */
 610                 if (hcd->speed == HCD_USB3) {
 611                         /* resume state is a xHCI internal state.
 612                          * Do not report it to usb core.
 613                          */
 614                         if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
 615                                 status |= (temp & PORT_PLS_MASK);
 616                 }
 617                 if (bus_state->port_c_suspend & (1 << wIndex))
 618                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 619                 xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 620                 put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 621                 break;
 622         case SetPortFeature:
 623                 if (wValue == USB_PORT_FEAT_LINK_STATE)
 624                         link_state = (wIndex & 0xff00) >> 3;
 625                 if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
 626                         wake_mask = wIndex & 0xff00;
 627                 /* The MSB of wIndex is the U1/U2 timeout */
 628                 timeout = (wIndex & 0xff00) >> 8;
 629                 wIndex &= 0xff;
 630                 if (!wIndex || wIndex > max_ports)
 631                         goto error;
 632                 wIndex--;
 633                 temp = xhci_readl(xhci, port_array[wIndex]);
 634                 if (temp == 0xffffffff) {
 635                         retval = -ENODEV;
 636                         break;
 637                 }
 638                 temp = xhci_port_state_to_neutral(temp);
 639                 /* FIXME: What new port features do we need to support? */
 640                 switch (wValue) {
 641                 case USB_PORT_FEAT_SUSPEND:
 642                         temp = xhci_readl(xhci, port_array[wIndex]);
 643                         if ((temp & PORT_PLS_MASK) != XDEV_U0) {
 644                                 /* Resume the port to U0 first */
 645                                 xhci_set_link_state(xhci, port_array, wIndex,
 646                                                         XDEV_U0);
 647                                 spin_unlock_irqrestore(&xhci->lock, flags);
 648                                 msleep(10);
 649                                 spin_lock_irqsave(&xhci->lock, flags);
 650                         }
 651                         /* In spec software should not attempt to suspend
 652                          * a port unless the port reports that it is in the
 653                          * enabled (PED = ‘1’,PLS < ‘3’) state.
 654                          */
 655                         temp = xhci_readl(xhci, port_array[wIndex]);
 656                         if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 657                                 || (temp & PORT_PLS_MASK) >= XDEV_U3) {
 658                                 xhci_warn(xhci, "USB core suspending device "
 659                                           "not in U0/U1/U2.\n");
 660                                 goto error;
 661                         }
 662
 663                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 664                                         wIndex + 1);
 665                         if (!slot_id) {
 666                                 xhci_warn(xhci, "slot_id is zero\n");
 667                                 goto error;
 668                         }
 669                         /* unlock to execute stop endpoint commands */
 670                         spin_unlock_irqrestore(&xhci->lock, flags);
 671                         xhci_stop_device(xhci, slot_id, 1);
 672                         spin_lock_irqsave(&xhci->lock, flags);
 673
 674                         xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
 675
 676                         spin_unlock_irqrestore(&xhci->lock, flags);
 677                         msleep(10); /* wait device to enter */
 678                         spin_lock_irqsave(&xhci->lock, flags);
 679
 680                         temp = xhci_readl(xhci, port_array[wIndex]);
 681                         bus_state->suspended_ports |= 1 << wIndex;
 682                         break;
 683                 case USB_PORT_FEAT_LINK_STATE:
 684                         temp = xhci_readl(xhci, port_array[wIndex]);
 685                         /* Software should not attempt to set
 686                          * port link state above '5' (Rx.Detect) and the port
 687                          * must be enabled.
 688                          */
 689                         if ((temp & PORT_PE) == 0 ||
 690                                 (link_state > USB_SS_PORT_LS_RX_DETECT)) {
 691                                 xhci_warn(xhci, "Cannot set link state.\n");
 692                                 goto error;
 693                         }
 694
 695                         if (link_state == USB_SS_PORT_LS_U3) {
 696                                 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 697                                                 wIndex + 1);
 698                                 if (slot_id) {
 699                                         /* unlock to execute stop endpoint
 700                                          * commands */
 701                                         spin_unlock_irqrestore(&xhci->lock,
 702                                                                 flags);
 703                                         xhci_stop_device(xhci, slot_id, 1);
 704                                         spin_lock_irqsave(&xhci->lock, flags);
 705                                 }
 706                         }
 707
 708                         xhci_set_link_state(xhci, port_array, wIndex,
 709                                                 link_state);
 710
 711                         spin_unlock_irqrestore(&xhci->lock, flags);
 712                         msleep(20); /* wait device to enter */
 713                         spin_lock_irqsave(&xhci->lock, flags);
 714
 715                         temp = xhci_readl(xhci, port_array[wIndex]);
 716                         if (link_state == USB_SS_PORT_LS_U3)
 717                                 bus_state->suspended_ports |= 1 << wIndex;
 718                         break;
 719                 case USB_PORT_FEAT_POWER:
 720                         /*
 721                          * Turn on ports, even if there isn't per-port switching.
 722                          * HC will report connect events even before this is set.
 723                          * However, khubd will ignore the roothub events until
 724                          * the roothub is registered.
 725                          */
 726                         xhci_writel(xhci, temp | PORT_POWER,
 727                                         port_array[wIndex]);
 728
 729                         temp = xhci_readl(xhci, port_array[wIndex]);
 730                         xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
 731                         break;
 732                 case USB_PORT_FEAT_RESET:
 733                         temp = (temp | PORT_RESET);
 734                         xhci_writel(xhci, temp, port_array[wIndex]);
 735
 736                         temp = xhci_readl(xhci, port_array[wIndex]);
 737                         xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 738                         break;
 739                 case USB_PORT_FEAT_REMOTE_WAKE_MASK:
 740                         xhci_set_remote_wake_mask(xhci, port_array,
 741                                         wIndex, wake_mask);
 742                         temp = xhci_readl(xhci, port_array[wIndex]);
 743                         xhci_dbg(xhci, "set port remote wake mask, "
 744                                         "actual port %d status  = 0x%x\n",
 745                                         wIndex, temp);
 746                         break;
 747                 case USB_PORT_FEAT_BH_PORT_RESET:
 748                         temp |= PORT_WR;
 749                         xhci_writel(xhci, temp, port_array[wIndex]);
 750
 751                         temp = xhci_readl(xhci, port_array[wIndex]);
 752                         break;
 753                 case USB_PORT_FEAT_U1_TIMEOUT:
 754                         if (hcd->speed != HCD_USB3)
 755                                 goto error;
 756                         temp = xhci_readl(xhci, port_array[wIndex] + 1);
 757                         temp &= ~PORT_U1_TIMEOUT_MASK;
 758                         temp |= PORT_U1_TIMEOUT(timeout);
 759                         xhci_writel(xhci, temp, port_array[wIndex] + 1);
 760                         break;
 761                 case USB_PORT_FEAT_U2_TIMEOUT:
 762                         if (hcd->speed != HCD_USB3)
 763                                 goto error;
 764                         temp = xhci_readl(xhci, port_array[wIndex] + 1);
 765                         temp &= ~PORT_U2_TIMEOUT_MASK;
 766                         temp |= PORT_U2_TIMEOUT(timeout);
 767                         xhci_writel(xhci, temp, port_array[wIndex] + 1);
 768                         break;
 769                 default:
 770                         goto error;
 771                 }
 772                 /* unblock any posted writes */
 773                 temp = xhci_readl(xhci, port_array[wIndex]);
 774                 break;
 775         case ClearPortFeature:
 776                 if (!wIndex || wIndex > max_ports)
 777                         goto error;
 778                 wIndex--;
 779                 temp = xhci_readl(xhci, port_array[wIndex]);
 780                 if (temp == 0xffffffff) {
 781                         retval = -ENODEV;
 782                         break;
 783                 }
 784                 /* FIXME: What new port features do we need to support? */
 785                 temp = xhci_port_state_to_neutral(temp);
 786                 switch (wValue) {
 787                 case USB_PORT_FEAT_SUSPEND:
 788                         temp = xhci_readl(xhci, port_array[wIndex]);
 789                         xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
 790                         xhci_dbg(xhci, "PORTSC %04x\n", temp);
 791                         if (temp & PORT_RESET)
 792                                 goto error;
 793                         if ((temp & PORT_PLS_MASK) == XDEV_U3) {
 794                                 if ((temp & PORT_PE) == 0)
 795                                         goto error;
 796
 797                                 xhci_set_link_state(xhci, port_array, wIndex,
 798                                                         XDEV_RESUME);
 799                                 spin_unlock_irqrestore(&xhci->lock, flags);
 800                                 msleep(20);
 801                                 spin_lock_irqsave(&xhci->lock, flags);
 802                                 xhci_set_link_state(xhci, port_array, wIndex,
 803                                                         XDEV_U0);
 804                         }
 805                         bus_state->port_c_suspend |= 1 << wIndex;
 806
 807                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 808                                         wIndex + 1);
 809                         if (!slot_id) {
 810                                 xhci_dbg(xhci, "slot_id is zero\n");
 811                                 goto error;
 812                         }
 813                         xhci_ring_device(xhci, slot_id);
 814                         break;
 815                 case USB_PORT_FEAT_C_SUSPEND:
 816                         bus_state->port_c_suspend &= ~(1 << wIndex);
 817                 case USB_PORT_FEAT_C_RESET:
 818                 case USB_PORT_FEAT_C_BH_PORT_RESET:
 819                 case USB_PORT_FEAT_C_CONNECTION:
 820                 case USB_PORT_FEAT_C_OVER_CURRENT:
 821                 case USB_PORT_FEAT_C_ENABLE:
 822                 case USB_PORT_FEAT_C_PORT_LINK_STATE:
 823                         xhci_clear_port_change_bit(xhci, wValue, wIndex,
 824                                         port_array[wIndex], temp);
 825                         break;
 826                 case USB_PORT_FEAT_ENABLE:
 827                         xhci_disable_port(hcd, xhci, wIndex,
 828                                         port_array[wIndex], temp);
 829                         break;
 830                 default:
 831                         goto error;
 832                 }
 833                 break;
 834         default:
 835 error:
 836                 /* "stall" on error */
 837                 retval = -EPIPE;
 838         }
 839         spin_unlock_irqrestore(&xhci->lock, flags);
 840         return retval;
 841 }
 842
 843 /*
 844  * Returns 0 if the status hasn't changed, or the number of bytes in buf.
 845  * Ports are 0-indexed from the HCD point of view,
 846  * and 1-indexed from the USB core pointer of view.
 847  *
 848  * Note that the status change bits will be cleared as soon as a port status
 849  * change event is generated, so we use the saved status from that event.
 850  */
 851 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 852 {
 853         unsigned long flags;
 854         u32 temp, status;
 855         u32 mask;
 856         int i, retval;
 857         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 858         int max_ports;
 859         __le32 __iomem **port_array;
 860         struct xhci_bus_state *bus_state;
 861
 862         max_ports = xhci_get_ports(hcd, &port_array);
 863         bus_state = &xhci->bus_state[hcd_index(hcd)];
 864
 865         /* Initial status is no changes */
 866         retval = (max_ports + 8) / 8;
 867         memset(buf, 0, retval);
 868
 869         /*
 870          * Inform the usbcore about resume-in-progress by returning
 871          * a non-zero value even if there are no status changes.
 872          */
 873         status = bus_state->resuming_ports;
 874
 875         mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
 876
 877         spin_lock_irqsave(&xhci->lock, flags);
 878         /* For each port, did anything change?  If so, set that bit in buf. */
 879         for (i = 0; i < max_ports; i++) {
 880                 temp = xhci_readl(xhci, port_array[i]);
 881                 if (temp == 0xffffffff) {
 882                         retval = -ENODEV;
 883                         break;
 884                 }
 885                 if ((temp & mask) != 0 ||
 886                         (bus_state->port_c_suspend & 1 << i) ||
 887                         (bus_state->resume_done[i] && time_after_eq(
 888                             jiffies, bus_state->resume_done[i]))) {
 889                         buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
 890                         status = 1;
 891                 }
 892         }
 893         spin_unlock_irqrestore(&xhci->lock, flags);
 894         return status ? retval : 0;
 895 }
 896
 897 #ifdef CONFIG_PM
 898
 899 int xhci_bus_suspend(struct usb_hcd *hcd)
 900 {
 901         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 902         int max_ports, port_index;
 903         __le32 __iomem **port_array;
 904         struct xhci_bus_state *bus_state;
 905         unsigned long flags;
 906
 907         max_ports = xhci_get_ports(hcd, &port_array);
 908         bus_state = &xhci->bus_state[hcd_index(hcd)];
 909
 910         spin_lock_irqsave(&xhci->lock, flags);
 911
 912         if (hcd->self.root_hub->do_remote_wakeup) {
 913                 if (bus_state->resuming_ports) {
 914                         spin_unlock_irqrestore(&xhci->lock, flags);
 915                         xhci_dbg(xhci, "suspend failed because "
 916                                                 "a port is resuming\n");
 917                         return -EBUSY;
 918                 }
 919         }
 920
 921         port_index = max_ports;
 922         bus_state->bus_suspended = 0;
 923         while (port_index--) {
 924                 /* suspend the port if the port is not suspended */
 925                 u32 t1, t2;
 926                 int slot_id;
 927
 928                 t1 = xhci_readl(xhci, port_array[port_index]);
 929                 t2 = xhci_port_state_to_neutral(t1);
 930
 931                 if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
 932                         xhci_dbg(xhci, "port %d not suspended\n", port_index);
 933                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 934                                         port_index + 1);
 935                         if (slot_id) {
 936                                 spin_unlock_irqrestore(&xhci->lock, flags);
 937                                 xhci_stop_device(xhci, slot_id, 1);
 938                                 spin_lock_irqsave(&xhci->lock, flags);
 939                         }
 940                         t2 &= ~PORT_PLS_MASK;
 941                         t2 |= PORT_LINK_STROBE | XDEV_U3;
 942                         set_bit(port_index, &bus_state->bus_suspended);
 943                 }
 944                 /* USB core sets remote wake mask for USB 3.0 hubs,
 945                  * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND
 946                  * is enabled, so also enable remote wake here.
 947                  */
 948                 if (hcd->self.root_hub->do_remote_wakeup) {
 949                         if (t1 & PORT_CONNECT) {
 950                                 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
 951                                 t2 &= ~PORT_WKCONN_E;
 952                         } else {
 953                                 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
 954                                 t2 &= ~PORT_WKDISC_E;
 955                         }
 956                 } else
 957                         t2 &= ~PORT_WAKE_BITS;
 958
 959                 t1 = xhci_port_state_to_neutral(t1);
 960                 if (t1 != t2)
 961                         xhci_writel(xhci, t2, port_array[port_index]);
 962
 963                 if (hcd->speed != HCD_USB3) {
 964                         /* enable remote wake up for USB 2.0 */
 965                         __le32 __iomem *addr;
 966                         u32 tmp;
 967
 968                         /* Add one to the port status register address to get
 969                          * the port power control register address.
 970                          */
 971                         addr = port_array[port_index] + 1;
 972                         tmp = xhci_readl(xhci, addr);
 973                         tmp |= PORT_RWE;
 974                         xhci_writel(xhci, tmp, addr);
 975                 }
 976         }
 977         hcd->state = HC_STATE_SUSPENDED;
 978         bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
 979         spin_unlock_irqrestore(&xhci->lock, flags);
 980         return 0;
 981 }
 982
 983 int xhci_bus_resume(struct usb_hcd *hcd)
 984 {
 985         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 986         int max_ports, port_index;
 987         __le32 __iomem **port_array;
 988         struct xhci_bus_state *bus_state;
 989         u32 temp;
 990         unsigned long flags;
 991
 992         max_ports = xhci_get_ports(hcd, &port_array);
 993         bus_state = &xhci->bus_state[hcd_index(hcd)];
 994
 995         if (time_before(jiffies, bus_state->next_statechange))
 996                 msleep(5);
 997
 998         spin_lock_irqsave(&xhci->lock, flags);
 999         if (!HCD_HW_ACCESSIBLE(hcd)) {
1000                 spin_unlock_irqrestore(&xhci->lock, flags);
1001                 return -ESHUTDOWN;
1002         }
1003
1004         /* delay the irqs */
1005         temp = xhci_readl(xhci, &xhci->op_regs->command);
1006         temp &= ~CMD_EIE;
1007         xhci_writel(xhci, temp, &xhci->op_regs->command);
1008
1009         port_index = max_ports;
1010         while (port_index--) {
1011                 /* Check whether need resume ports. If needed
1012                    resume port and disable remote wakeup */
1013                 u32 temp;
1014                 int slot_id;
1015
1016                 temp = xhci_readl(xhci, port_array[port_index]);
1017                 if (DEV_SUPERSPEED(temp))
1018                         temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
1019                 else
1020                         temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
1021                 if (test_bit(port_index, &bus_state->bus_suspended) &&
1022                     (temp & PORT_PLS_MASK)) {
1023                         if (DEV_SUPERSPEED(temp)) {
1024                                 xhci_set_link_state(xhci, port_array,
1025                                                         port_index, XDEV_U0);
1026                         } else {
1027                                 xhci_set_link_state(xhci, port_array,
1028                                                 port_index, XDEV_RESUME);
1029
1030                                 spin_unlock_irqrestore(&xhci->lock, flags);
1031                                 msleep(20);
1032                                 spin_lock_irqsave(&xhci->lock, flags);
1033
1034                                 xhci_set_link_state(xhci, port_array,
1035                                                         port_index, XDEV_U0);
1036                         }
1037                         /* wait for the port to enter U0 and report port link
1038                          * state change.
1039                          */
1040                         spin_unlock_irqrestore(&xhci->lock, flags);
1041                         msleep(20);
1042                         spin_lock_irqsave(&xhci->lock, flags);
1043
1044                         /* Clear PLC */
1045                         xhci_test_and_clear_bit(xhci, port_array, port_index,
1046                                                 PORT_PLC);
1047
1048                         slot_id = xhci_find_slot_id_by_port(hcd,
1049                                         xhci, port_index + 1);
1050                         if (slot_id)
1051                                 xhci_ring_device(xhci, slot_id);
1052                 } else
1053                         xhci_writel(xhci, temp, port_array[port_index]);
1054
1055                 if (hcd->speed != HCD_USB3) {
1056                         /* disable remote wake up for USB 2.0 */
1057                         __le32 __iomem *addr;
1058                         u32 tmp;
1059
1060                         /* Add one to the port status register address to get
1061                          * the port power control register address.
1062                          */
1063                         addr = port_array[port_index] + 1;
1064                         tmp = xhci_readl(xhci, addr);
1065                         tmp &= ~PORT_RWE;
1066                         xhci_writel(xhci, tmp, addr);
1067                 }
1068         }
1069
1070         (void) xhci_readl(xhci, &xhci->op_regs->command);
1071
1072         bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
1073         /* re-enable irqs */
1074         temp = xhci_readl(xhci, &xhci->op_regs->command);
1075         temp |= CMD_EIE;
1076         xhci_writel(xhci, temp, &xhci->op_regs->command);
1077         temp = xhci_readl(xhci, &xhci->op_regs->command);
1078
1079         spin_unlock_irqrestore(&xhci->lock, flags);
1080         return 0;
1081 }
1082
1083 #endif  /* CONFIG_PM */