Pileus Git - ~andy/linux/blob - drivers/usb/host/ehci-orion.c

   1 /*
   2  * drivers/usb/host/ehci-orion.c
   3  *
   4  * Tzachi Perelstein <tzachi@marvell.com>
   5  *
   6  * This file is licensed under  the terms of the GNU General Public
   7  * License version 2. This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/module.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/mbus.h>
  15 #include <linux/clk.h>
  16 #include <linux/platform_data/usb-ehci-orion.h>
  17 #include <linux/of.h>
  18 #include <linux/of_device.h>
  19 #include <linux/of_irq.h>
  20 #include <linux/usb.h>
  21 #include <linux/usb/hcd.h>
  22 #include <linux/io.h>
  23 #include <linux/dma-mapping.h>
  24
  25 #include "ehci.h"
  26
  27 #define rdl(off)        __raw_readl(hcd->regs + (off))
  28 #define wrl(off, val)   __raw_writel((val), hcd->regs + (off))
  29
  30 #define USB_CMD                 0x140
  31 #define USB_MODE                0x1a8
  32 #define USB_CAUSE               0x310
  33 #define USB_MASK                0x314
  34 #define USB_WINDOW_CTRL(i)      (0x320 + ((i) << 4))
  35 #define USB_WINDOW_BASE(i)      (0x324 + ((i) << 4))
  36 #define USB_IPG                 0x360
  37 #define USB_PHY_PWR_CTRL        0x400
  38 #define USB_PHY_TX_CTRL         0x420
  39 #define USB_PHY_RX_CTRL         0x430
  40 #define USB_PHY_IVREF_CTRL      0x440
  41 #define USB_PHY_TST_GRP_CTRL    0x450
  42
  43 #define DRIVER_DESC "EHCI orion driver"
  44
  45 static const char hcd_name[] = "ehci-orion";
  46
  47 static struct hc_driver __read_mostly ehci_orion_hc_driver;
  48
  49 /*
  50  * Implement Orion USB controller specification guidelines
  51  */
  52 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
  53 {
  54         /* The below GLs are according to the Orion Errata document */
  55         /*
  56          * Clear interrupt cause and mask
  57          */
  58         wrl(USB_CAUSE, 0);
  59         wrl(USB_MASK, 0);
  60
  61         /*
  62          * Reset controller
  63          */
  64         wrl(USB_CMD, rdl(USB_CMD) | 0x2);
  65         while (rdl(USB_CMD) & 0x2);
  66
  67         /*
  68          * GL# USB-10: Set IPG for non start of frame packets
  69          * Bits[14:8]=0xc
  70          */
  71         wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
  72
  73         /*
  74          * GL# USB-9: USB 2.0 Power Control
  75          * BG_VSEL[7:6]=0x1
  76          */
  77         wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
  78
  79         /*
  80          * GL# USB-1: USB PHY Tx Control - force calibration to '8'
  81          * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
  82          */
  83         wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
  84
  85         /*
  86          * GL# USB-3 GL# USB-9: USB PHY Rx Control
  87          * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
  88          * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
  89          */
  90         wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
  91
  92         /*
  93          * GL# USB-3 GL# USB-9: USB PHY IVREF Control
  94          * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
  95          */
  96         wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
  97
  98         /*
  99          * GL# USB-3 GL# USB-9: USB PHY Test Group Control
 100          * REG_FIFO_SQ_RST[15]=0
 101          */
 102         wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
 103
 104         /*
 105          * Stop and reset controller
 106          */
 107         wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
 108         wrl(USB_CMD, rdl(USB_CMD) | 0x2);
 109         while (rdl(USB_CMD) & 0x2);
 110
 111         /*
 112          * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
 113          * TBD: This need to be done after each reset!
 114          * GL# USB-4 Setup USB Host mode
 115          */
 116         wrl(USB_MODE, 0x13);
 117 }
 118
 119 static void
 120 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
 121                              const struct mbus_dram_target_info *dram)
 122 {
 123         int i;
 124
 125         for (i = 0; i < 4; i++) {
 126                 wrl(USB_WINDOW_CTRL(i), 0);
 127                 wrl(USB_WINDOW_BASE(i), 0);
 128         }
 129
 130         for (i = 0; i < dram->num_cs; i++) {
 131                 const struct mbus_dram_window *cs = dram->cs + i;
 132
 133                 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
 134                                         (cs->mbus_attr << 8) |
 135                                         (dram->mbus_dram_target_id << 4) | 1);
 136                 wrl(USB_WINDOW_BASE(i), cs->base);
 137         }
 138 }
 139
 140 static int ehci_orion_drv_probe(struct platform_device *pdev)
 141 {
 142         struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
 143         const struct mbus_dram_target_info *dram;
 144         struct resource *res;
 145         struct usb_hcd *hcd;
 146         struct ehci_hcd *ehci;
 147         struct clk *clk;
 148         void __iomem *regs;
 149         int irq, err;
 150         enum orion_ehci_phy_ver phy_version;
 151
 152         if (usb_disabled())
 153                 return -ENODEV;
 154
 155         pr_debug("Initializing Orion-SoC USB Host Controller\n");
 156
 157         if (pdev->dev.of_node)
 158                 irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
 159         else
 160                 irq = platform_get_irq(pdev, 0);
 161         if (irq <= 0) {
 162                 dev_err(&pdev->dev,
 163                         "Found HC with no IRQ. Check %s setup!\n",
 164                         dev_name(&pdev->dev));
 165                 err = -ENODEV;
 166                 goto err1;
 167         }
 168
 169         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 170         if (!res) {
 171                 dev_err(&pdev->dev,
 172                         "Found HC with no register addr. Check %s setup!\n",
 173                         dev_name(&pdev->dev));
 174                 err = -ENODEV;
 175                 goto err1;
 176         }
 177
 178         /*
 179          * Right now device-tree probed devices don't get dma_mask
 180          * set. Since shared usb code relies on it, set it here for
 181          * now. Once we have dma capability bindings this can go away.
 182          */
 183         err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 184         if (err)
 185                 goto err1;
 186
 187         if (!request_mem_region(res->start, resource_size(res),
 188                                 ehci_orion_hc_driver.description)) {
 189                 dev_dbg(&pdev->dev, "controller already in use\n");
 190                 err = -EBUSY;
 191                 goto err1;
 192         }
 193
 194         regs = ioremap(res->start, resource_size(res));
 195         if (regs == NULL) {
 196                 dev_dbg(&pdev->dev, "error mapping memory\n");
 197                 err = -EFAULT;
 198                 goto err2;
 199         }
 200
 201         /* Not all platforms can gate the clock, so it is not
 202            an error if the clock does not exists. */
 203         clk = clk_get(&pdev->dev, NULL);
 204         if (!IS_ERR(clk)) {
 205                 clk_prepare_enable(clk);
 206                 clk_put(clk);
 207         }
 208
 209         hcd = usb_create_hcd(&ehci_orion_hc_driver,
 210                         &pdev->dev, dev_name(&pdev->dev));
 211         if (!hcd) {
 212                 err = -ENOMEM;
 213                 goto err3;
 214         }
 215
 216         hcd->rsrc_start = res->start;
 217         hcd->rsrc_len = resource_size(res);
 218         hcd->regs = regs;
 219
 220         ehci = hcd_to_ehci(hcd);
 221         ehci->caps = hcd->regs + 0x100;
 222         hcd->has_tt = 1;
 223
 224         /*
 225          * (Re-)program MBUS remapping windows if we are asked to.
 226          */
 227         dram = mv_mbus_dram_info();
 228         if (dram)
 229                 ehci_orion_conf_mbus_windows(hcd, dram);
 230
 231         /*
 232          * setup Orion USB controller.
 233          */
 234         if (pdev->dev.of_node)
 235                 phy_version = EHCI_PHY_NA;
 236         else
 237                 phy_version = pd->phy_version;
 238
 239         switch (phy_version) {
 240         case EHCI_PHY_NA:       /* dont change USB phy settings */
 241                 break;
 242         case EHCI_PHY_ORION:
 243                 orion_usb_phy_v1_setup(hcd);
 244                 break;
 245         case EHCI_PHY_DD:
 246         case EHCI_PHY_KW:
 247         default:
 248                 printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
 249         }
 250
 251         err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 252         if (err)
 253                 goto err4;
 254
 255         return 0;
 256
 257 err4:
 258         usb_put_hcd(hcd);
 259 err3:
 260         if (!IS_ERR(clk)) {
 261                 clk_disable_unprepare(clk);
 262                 clk_put(clk);
 263         }
 264         iounmap(regs);
 265 err2:
 266         release_mem_region(res->start, resource_size(res));
 267 err1:
 268         dev_err(&pdev->dev, "init %s fail, %d\n",
 269                 dev_name(&pdev->dev), err);
 270
 271         return err;
 272 }
 273
 274 static int ehci_orion_drv_remove(struct platform_device *pdev)
 275 {
 276         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 277         struct clk *clk;
 278
 279         usb_remove_hcd(hcd);
 280         iounmap(hcd->regs);
 281         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 282         usb_put_hcd(hcd);
 283
 284         clk = clk_get(&pdev->dev, NULL);
 285         if (!IS_ERR(clk)) {
 286                 clk_disable_unprepare(clk);
 287                 clk_put(clk);
 288         }
 289         return 0;
 290 }
 291
 292 static const struct of_device_id ehci_orion_dt_ids[] = {
 293         { .compatible = "marvell,orion-ehci", },
 294         {},
 295 };
 296 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
 297
 298 static struct platform_driver ehci_orion_driver = {
 299         .probe          = ehci_orion_drv_probe,
 300         .remove         = ehci_orion_drv_remove,
 301         .shutdown       = usb_hcd_platform_shutdown,
 302         .driver = {
 303                 .name   = "orion-ehci",
 304                 .owner  = THIS_MODULE,
 305                 .of_match_table = ehci_orion_dt_ids,
 306         },
 307 };
 308
 309 static int __init ehci_orion_init(void)
 310 {
 311         if (usb_disabled())
 312                 return -ENODEV;
 313
 314         pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 315
 316         ehci_init_driver(&ehci_orion_hc_driver, NULL);
 317         return platform_driver_register(&ehci_orion_driver);
 318 }
 319 module_init(ehci_orion_init);
 320
 321 static void __exit ehci_orion_cleanup(void)
 322 {
 323         platform_driver_unregister(&ehci_orion_driver);
 324 }
 325 module_exit(ehci_orion_cleanup);
 326
 327 MODULE_DESCRIPTION(DRIVER_DESC);
 328 MODULE_ALIAS("platform:orion-ehci");
 329 MODULE_AUTHOR("Tzachi Perelstein");
 330 MODULE_LICENSE("GPL v2");