Pileus Git - ~andy/linux/blob - drivers/usb/host/ehci-omap.c

   1 /*
   2  * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
   3  *
   4  * Bus Glue for the EHCI controllers in OMAP3/4
   5  * Tested on several OMAP3 boards, and OMAP4 Pandaboard
   6  *
   7  * Copyright (C) 2007-2011 Texas Instruments, Inc.
   8  *      Author: Vikram Pandita <vikram.pandita@ti.com>
   9  *      Author: Anand Gadiyar <gadiyar@ti.com>
  10  *      Author: Keshava Munegowda <keshava_mgowda@ti.com>
  11  *
  12  * Copyright (C) 2009 Nokia Corporation
  13  *      Contact: Felipe Balbi <felipe.balbi@nokia.com>
  14  *
  15  * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
  16  *
  17  * This program is free software; you can redistribute it and/or modify
  18  * it under the terms of the GNU General Public License as published by
  19  * the Free Software Foundation; either version 2 of the License, or
  20  * (at your option) any later version.
  21  *
  22  * This program is distributed in the hope that it will be useful,
  23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  25  * GNU General Public License for more details.
  26  *
  27  * You should have received a copy of the GNU General Public License
  28  * along with this program; if not, write to the Free Software
  29  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  30  *
  31  * TODO (last updated Feb 27, 2010):
  32  *      - add kernel-doc
  33  *      - enable AUTOIDLE
  34  *      - add suspend/resume
  35  *      - add HSIC and TLL support
  36  *      - convert to use hwmod and runtime PM
  37  */
  38
  39 #include <linux/platform_device.h>
  40 #include <linux/slab.h>
  41 #include <linux/usb/ulpi.h>
  42 #include <plat/usb.h>
  43 #include <linux/regulator/consumer.h>
  44 #include <linux/pm_runtime.h>
  45
  46 /* EHCI Register Set */
  47 #define EHCI_INSNREG04                                  (0xA0)
  48 #define EHCI_INSNREG04_DISABLE_UNSUSPEND                (1 << 5)
  49 #define EHCI_INSNREG05_ULPI                             (0xA4)
  50 #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT               31
  51 #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT               24
  52 #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT                 22
  53 #define EHCI_INSNREG05_ULPI_REGADD_SHIFT                16
  54 #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT             8
  55 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT                0
  56
  57 /*-------------------------------------------------------------------------*/
  58
  59 static const struct hc_driver ehci_omap_hc_driver;
  60
  61
  62 static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
  63 {
  64         __raw_writel(val, base + reg);
  65 }
  66
  67 static inline u32 ehci_read(void __iomem *base, u32 reg)
  68 {
  69         return __raw_readl(base + reg);
  70 }
  71
  72 static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
  73 {
  74         struct usb_hcd  *hcd = dev_get_drvdata(&pdev->dev);
  75         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
  76         unsigned reg = 0;
  77
  78         reg = ULPI_FUNC_CTRL_RESET
  79                 /* FUNCTION_CTRL_SET register */
  80                 | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
  81                 /* Write */
  82                 | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
  83                 /* PORTn */
  84                 | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
  85                 /* start ULPI access*/
  86                 | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
  87
  88         ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg);
  89
  90         /* Wait for ULPI access completion */
  91         while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI)
  92                         & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
  93                 cpu_relax();
  94
  95                 if (time_after(jiffies, timeout)) {
  96                         dev_dbg(&pdev->dev, "phy reset operation timed out\n");
  97                         break;
  98                 }
  99         }
 100 }
 101
 102 static void disable_put_regulator(
 103                 struct ehci_hcd_omap_platform_data *pdata)
 104 {
 105         int i;
 106
 107         for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
 108                 if (pdata->regulator[i]) {
 109                         regulator_disable(pdata->regulator[i]);
 110                         regulator_put(pdata->regulator[i]);
 111                 }
 112         }
 113 }
 114
 115 /* configure so an HC device and id are always provided */
 116 /* always called with process context; sleeping is OK */
 117
 118 /**
 119  * ehci_hcd_omap_probe - initialize TI-based HCDs
 120  *
 121  * Allocates basic resources for this USB host controller, and
 122  * then invokes the start() method for the HCD associated with it
 123  * through the hotplug entry's driver_data.
 124  */
 125 static int ehci_hcd_omap_probe(struct platform_device *pdev)
 126 {
 127         struct device                           *dev = &pdev->dev;
 128         struct ehci_hcd_omap_platform_data      *pdata = dev->platform_data;
 129         struct resource                         *res;
 130         struct usb_hcd                          *hcd;
 131         void __iomem                            *regs;
 132         struct ehci_hcd                         *omap_ehci;
 133         int                                     ret = -ENODEV;
 134         int                                     irq;
 135         int                                     i;
 136         char                                    supply[7];
 137
 138         if (usb_disabled())
 139                 return -ENODEV;
 140
 141         if (!dev->parent) {
 142                 dev_err(dev, "Missing parent device\n");
 143                 return -ENODEV;
 144         }
 145
 146         irq = platform_get_irq_byname(pdev, "ehci-irq");
 147         if (irq < 0) {
 148                 dev_err(dev, "EHCI irq failed\n");
 149                 return -ENODEV;
 150         }
 151
 152         res =  platform_get_resource_byname(pdev,
 153                                 IORESOURCE_MEM, "ehci");
 154         if (!res) {
 155                 dev_err(dev, "UHH EHCI get resource failed\n");
 156                 return -ENODEV;
 157         }
 158
 159         regs = ioremap(res->start, resource_size(res));
 160         if (!regs) {
 161                 dev_err(dev, "UHH EHCI ioremap failed\n");
 162                 return -ENOMEM;
 163         }
 164
 165         hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
 166                         dev_name(dev));
 167         if (!hcd) {
 168                 dev_err(dev, "failed to create hcd with err %d\n", ret);
 169                 ret = -ENOMEM;
 170                 goto err_io;
 171         }
 172
 173         hcd->rsrc_start = res->start;
 174         hcd->rsrc_len = resource_size(res);
 175         hcd->regs = regs;
 176
 177         /* get ehci regulator and enable */
 178         for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
 179                 if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
 180                         pdata->regulator[i] = NULL;
 181                         continue;
 182                 }
 183                 snprintf(supply, sizeof(supply), "hsusb%d", i);
 184                 pdata->regulator[i] = regulator_get(dev, supply);
 185                 if (IS_ERR(pdata->regulator[i])) {
 186                         pdata->regulator[i] = NULL;
 187                         dev_dbg(dev,
 188                         "failed to get ehci port%d regulator\n", i);
 189                 } else {
 190                         regulator_enable(pdata->regulator[i]);
 191                 }
 192         }
 193
 194         pm_runtime_enable(dev);
 195         pm_runtime_get_sync(dev);
 196
 197         /*
 198          * An undocumented "feature" in the OMAP3 EHCI controller,
 199          * causes suspended ports to be taken out of suspend when
 200          * the USBCMD.Run/Stop bit is cleared (for example when
 201          * we do ehci_bus_suspend).
 202          * This breaks suspend-resume if the root-hub is allowed
 203          * to suspend. Writing 1 to this undocumented register bit
 204          * disables this feature and restores normal behavior.
 205          */
 206         ehci_write(regs, EHCI_INSNREG04,
 207                                 EHCI_INSNREG04_DISABLE_UNSUSPEND);
 208
 209         /* Soft reset the PHY using PHY reset command over ULPI */
 210         if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
 211                 omap_ehci_soft_phy_reset(pdev, 0);
 212         if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
 213                 omap_ehci_soft_phy_reset(pdev, 1);
 214
 215         omap_ehci = hcd_to_ehci(hcd);
 216         omap_ehci->sbrn = 0x20;
 217
 218         /* we know this is the memory we want, no need to ioremap again */
 219         omap_ehci->caps = hcd->regs;
 220         omap_ehci->regs = hcd->regs
 221                 + HC_LENGTH(ehci, readl(&omap_ehci->caps->hc_capbase));
 222
 223         dbg_hcs_params(omap_ehci, "reset");
 224         dbg_hcc_params(omap_ehci, "reset");
 225
 226         /* cache this readonly data; minimize chip reads */
 227         omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
 228
 229         ehci_reset(omap_ehci);
 230
 231         ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 232         if (ret) {
 233                 dev_err(dev, "failed to add hcd with err %d\n", ret);
 234                 goto err_add_hcd;
 235         }
 236
 237         /* root ports should always stay powered */
 238         ehci_port_power(omap_ehci, 1);
 239
 240         return 0;
 241
 242 err_add_hcd:
 243         disable_put_regulator(pdata);
 244         pm_runtime_put_sync(dev);
 245
 246 err_io:
 247         iounmap(regs);
 248         return ret;
 249 }
 250
 251
 252 /**
 253  * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
 254  * @pdev: USB Host Controller being removed
 255  *
 256  * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
 257  * the HCD's stop() method.  It is always called from a thread
 258  * context, normally "rmmod", "apmd", or something similar.
 259  */
 260 static int ehci_hcd_omap_remove(struct platform_device *pdev)
 261 {
 262         struct device *dev      = &pdev->dev;
 263         struct usb_hcd *hcd     = dev_get_drvdata(dev);
 264
 265         usb_remove_hcd(hcd);
 266         disable_put_regulator(dev->platform_data);
 267         iounmap(hcd->regs);
 268         usb_put_hcd(hcd);
 269         pm_runtime_put_sync(dev);
 270         pm_runtime_disable(dev);
 271
 272         return 0;
 273 }
 274
 275 static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
 276 {
 277         struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
 278
 279         if (hcd->driver->shutdown)
 280                 hcd->driver->shutdown(hcd);
 281 }
 282
 283 static struct platform_driver ehci_hcd_omap_driver = {
 284         .probe                  = ehci_hcd_omap_probe,
 285         .remove                 = ehci_hcd_omap_remove,
 286         .shutdown               = ehci_hcd_omap_shutdown,
 287         /*.suspend              = ehci_hcd_omap_suspend, */
 288         /*.resume               = ehci_hcd_omap_resume, */
 289         .driver = {
 290                 .name           = "ehci-omap",
 291         }
 292 };
 293
 294 /*-------------------------------------------------------------------------*/
 295
 296 static const struct hc_driver ehci_omap_hc_driver = {
 297         .description            = hcd_name,
 298         .product_desc           = "OMAP-EHCI Host Controller",
 299         .hcd_priv_size          = sizeof(struct ehci_hcd),
 300
 301         /*
 302          * generic hardware linkage
 303          */
 304         .irq                    = ehci_irq,
 305         .flags                  = HCD_MEMORY | HCD_USB2,
 306
 307         /*
 308          * basic lifecycle operations
 309          */
 310         .reset                  = ehci_init,
 311         .start                  = ehci_run,
 312         .stop                   = ehci_stop,
 313         .shutdown               = ehci_shutdown,
 314
 315         /*
 316          * managing i/o requests and associated device resources
 317          */
 318         .urb_enqueue            = ehci_urb_enqueue,
 319         .urb_dequeue            = ehci_urb_dequeue,
 320         .endpoint_disable       = ehci_endpoint_disable,
 321         .endpoint_reset         = ehci_endpoint_reset,
 322
 323         /*
 324          * scheduling support
 325          */
 326         .get_frame_number       = ehci_get_frame,
 327
 328         /*
 329          * root hub support
 330          */
 331         .hub_status_data        = ehci_hub_status_data,
 332         .hub_control            = ehci_hub_control,
 333         .bus_suspend            = ehci_bus_suspend,
 334         .bus_resume             = ehci_bus_resume,
 335
 336         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 337 };
 338
 339 MODULE_ALIAS("platform:omap-ehci");
 340 MODULE_AUTHOR("Texas Instruments, Inc.");
 341 MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
 342