Pileus Git - ~andy/linux/blob - drivers/tty/synclink_gt.c

   1 /*
   2  * Device driver for Microgate SyncLink GT serial adapters.
   3  *
   4  * written by Paul Fulghum for Microgate Corporation
   5  * paulkf@microgate.com
   6  *
   7  * Microgate and SyncLink are trademarks of Microgate Corporation
   8  *
   9  * This code is released under the GNU General Public License (GPL)
  10  *
  11  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  12  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  13  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  14  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  15  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  16  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  17  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  18  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  19  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  20  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  21  * OF THE POSSIBILITY OF SUCH DAMAGE.
  22  */
  23
  24 /*
  25  * DEBUG OUTPUT DEFINITIONS
  26  *
  27  * uncomment lines below to enable specific types of debug output
  28  *
  29  * DBGINFO   information - most verbose output
  30  * DBGERR    serious errors
  31  * DBGBH     bottom half service routine debugging
  32  * DBGISR    interrupt service routine debugging
  33  * DBGDATA   output receive and transmit data
  34  * DBGTBUF   output transmit DMA buffers and registers
  35  * DBGRBUF   output receive DMA buffers and registers
  36  */
  37
  38 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
  39 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
  40 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
  41 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
  42 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
  43 /*#define DBGTBUF(info) dump_tbufs(info)*/
  44 /*#define DBGRBUF(info) dump_rbufs(info)*/
  45
  46
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/signal.h>
  50 #include <linux/sched.h>
  51 #include <linux/timer.h>
  52 #include <linux/interrupt.h>
  53 #include <linux/pci.h>
  54 #include <linux/tty.h>
  55 #include <linux/tty_flip.h>
  56 #include <linux/serial.h>
  57 #include <linux/major.h>
  58 #include <linux/string.h>
  59 #include <linux/fcntl.h>
  60 #include <linux/ptrace.h>
  61 #include <linux/ioport.h>
  62 #include <linux/mm.h>
  63 #include <linux/seq_file.h>
  64 #include <linux/slab.h>
  65 #include <linux/netdevice.h>
  66 #include <linux/vmalloc.h>
  67 #include <linux/init.h>
  68 #include <linux/delay.h>
  69 #include <linux/ioctl.h>
  70 #include <linux/termios.h>
  71 #include <linux/bitops.h>
  72 #include <linux/workqueue.h>
  73 #include <linux/hdlc.h>
  74 #include <linux/synclink.h>
  75
  76 #include <asm/system.h>
  77 #include <asm/io.h>
  78 #include <asm/irq.h>
  79 #include <asm/dma.h>
  80 #include <asm/types.h>
  81 #include <asm/uaccess.h>
  82
  83 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
  84 #define SYNCLINK_GENERIC_HDLC 1
  85 #else
  86 #define SYNCLINK_GENERIC_HDLC 0
  87 #endif
  88
  89 /*
  90  * module identification
  91  */
  92 static char *driver_name     = "SyncLink GT";
  93 static char *tty_driver_name = "synclink_gt";
  94 static char *tty_dev_prefix  = "ttySLG";
  95 MODULE_LICENSE("GPL");
  96 #define MGSL_MAGIC 0x5401
  97 #define MAX_DEVICES 32
  98
  99 static struct pci_device_id pci_table[] = {
 100         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 101         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 102         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 103         {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 104         {0,}, /* terminate list */
 105 };
 106 MODULE_DEVICE_TABLE(pci, pci_table);
 107
 108 static int  init_one(struct pci_dev *dev,const struct pci_device_id *ent);
 109 static void remove_one(struct pci_dev *dev);
 110 static struct pci_driver pci_driver = {
 111         .name           = "synclink_gt",
 112         .id_table       = pci_table,
 113         .probe          = init_one,
 114         .remove         = __devexit_p(remove_one),
 115 };
 116
 117 static bool pci_registered;
 118
 119 /*
 120  * module configuration and status
 121  */
 122 static struct slgt_info *slgt_device_list;
 123 static int slgt_device_count;
 124
 125 static int ttymajor;
 126 static int debug_level;
 127 static int maxframe[MAX_DEVICES];
 128
 129 module_param(ttymajor, int, 0);
 130 module_param(debug_level, int, 0);
 131 module_param_array(maxframe, int, NULL, 0);
 132
 133 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
 134 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
 135 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
 136
 137 /*
 138  * tty support and callbacks
 139  */
 140 static struct tty_driver *serial_driver;
 141
 142 static int  open(struct tty_struct *tty, struct file * filp);
 143 static void close(struct tty_struct *tty, struct file * filp);
 144 static void hangup(struct tty_struct *tty);
 145 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
 146
 147 static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
 148 static int put_char(struct tty_struct *tty, unsigned char ch);
 149 static void send_xchar(struct tty_struct *tty, char ch);
 150 static void wait_until_sent(struct tty_struct *tty, int timeout);
 151 static int  write_room(struct tty_struct *tty);
 152 static void flush_chars(struct tty_struct *tty);
 153 static void flush_buffer(struct tty_struct *tty);
 154 static void tx_hold(struct tty_struct *tty);
 155 static void tx_release(struct tty_struct *tty);
 156
 157 static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 158 static int  chars_in_buffer(struct tty_struct *tty);
 159 static void throttle(struct tty_struct * tty);
 160 static void unthrottle(struct tty_struct * tty);
 161 static int set_break(struct tty_struct *tty, int break_state);
 162
 163 /*
 164  * generic HDLC support and callbacks
 165  */
 166 #if SYNCLINK_GENERIC_HDLC
 167 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
 168 static void hdlcdev_tx_done(struct slgt_info *info);
 169 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
 170 static int  hdlcdev_init(struct slgt_info *info);
 171 static void hdlcdev_exit(struct slgt_info *info);
 172 #endif
 173
 174
 175 /*
 176  * device specific structures, macros and functions
 177  */
 178
 179 #define SLGT_MAX_PORTS 4
 180 #define SLGT_REG_SIZE  256
 181
 182 /*
 183  * conditional wait facility
 184  */
 185 struct cond_wait {
 186         struct cond_wait *next;
 187         wait_queue_head_t q;
 188         wait_queue_t wait;
 189         unsigned int data;
 190 };
 191 static void init_cond_wait(struct cond_wait *w, unsigned int data);
 192 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
 193 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
 194 static void flush_cond_wait(struct cond_wait **head);
 195
 196 /*
 197  * DMA buffer descriptor and access macros
 198  */
 199 struct slgt_desc
 200 {
 201         __le16 count;
 202         __le16 status;
 203         __le32 pbuf;  /* physical address of data buffer */
 204         __le32 next;  /* physical address of next descriptor */
 205
 206         /* driver book keeping */
 207         char *buf;          /* virtual  address of data buffer */
 208         unsigned int pdesc; /* physical address of this descriptor */
 209         dma_addr_t buf_dma_addr;
 210         unsigned short buf_count;
 211 };
 212
 213 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
 214 #define set_desc_next(a,b) (a).next   = cpu_to_le32((unsigned int)(b))
 215 #define set_desc_count(a,b)(a).count  = cpu_to_le16((unsigned short)(b))
 216 #define set_desc_eof(a,b)  (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
 217 #define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
 218 #define desc_count(a)      (le16_to_cpu((a).count))
 219 #define desc_status(a)     (le16_to_cpu((a).status))
 220 #define desc_complete(a)   (le16_to_cpu((a).status) & BIT15)
 221 #define desc_eof(a)        (le16_to_cpu((a).status) & BIT2)
 222 #define desc_crc_error(a)  (le16_to_cpu((a).status) & BIT1)
 223 #define desc_abort(a)      (le16_to_cpu((a).status) & BIT0)
 224 #define desc_residue(a)    ((le16_to_cpu((a).status) & 0x38) >> 3)
 225
 226 struct _input_signal_events {
 227         int ri_up;
 228         int ri_down;
 229         int dsr_up;
 230         int dsr_down;
 231         int dcd_up;
 232         int dcd_down;
 233         int cts_up;
 234         int cts_down;
 235 };
 236
 237 /*
 238  * device instance data structure
 239  */
 240 struct slgt_info {
 241         void *if_ptr;           /* General purpose pointer (used by SPPP) */
 242         struct tty_port port;
 243
 244         struct slgt_info *next_device;  /* device list link */
 245
 246         int magic;
 247
 248         char device_name[25];
 249         struct pci_dev *pdev;
 250
 251         int port_count;  /* count of ports on adapter */
 252         int adapter_num; /* adapter instance number */
 253         int port_num;    /* port instance number */
 254
 255         /* array of pointers to port contexts on this adapter */
 256         struct slgt_info *port_array[SLGT_MAX_PORTS];
 257
 258         int                     line;           /* tty line instance number */
 259
 260         struct mgsl_icount      icount;
 261
 262         int                     timeout;
 263         int                     x_char;         /* xon/xoff character */
 264         unsigned int            read_status_mask;
 265         unsigned int            ignore_status_mask;
 266
 267         wait_queue_head_t       status_event_wait_q;
 268         wait_queue_head_t       event_wait_q;
 269         struct timer_list       tx_timer;
 270         struct timer_list       rx_timer;
 271
 272         unsigned int            gpio_present;
 273         struct cond_wait        *gpio_wait_q;
 274
 275         spinlock_t lock;        /* spinlock for synchronizing with ISR */
 276
 277         struct work_struct task;
 278         u32 pending_bh;
 279         bool bh_requested;
 280         bool bh_running;
 281
 282         int isr_overflow;
 283         bool irq_requested;     /* true if IRQ requested */
 284         bool irq_occurred;      /* for diagnostics use */
 285
 286         /* device configuration */
 287
 288         unsigned int bus_type;
 289         unsigned int irq_level;
 290         unsigned long irq_flags;
 291
 292         unsigned char __iomem * reg_addr;  /* memory mapped registers address */
 293         u32 phys_reg_addr;
 294         bool reg_addr_requested;
 295
 296         MGSL_PARAMS params;       /* communications parameters */
 297         u32 idle_mode;
 298         u32 max_frame_size;       /* as set by device config */
 299
 300         unsigned int rbuf_fill_level;
 301         unsigned int rx_pio;
 302         unsigned int if_mode;
 303         unsigned int base_clock;
 304         unsigned int xsync;
 305         unsigned int xctrl;
 306
 307         /* device status */
 308
 309         bool rx_enabled;
 310         bool rx_restart;
 311
 312         bool tx_enabled;
 313         bool tx_active;
 314
 315         unsigned char signals;    /* serial signal states */
 316         int init_error;  /* initialization error */
 317
 318         unsigned char *tx_buf;
 319         int tx_count;
 320
 321         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
 322         char char_buf[MAX_ASYNC_BUFFER_SIZE];
 323         bool drop_rts_on_tx_done;
 324         struct  _input_signal_events    input_signal_events;
 325
 326         int dcd_chkcount;       /* check counts to prevent */
 327         int cts_chkcount;       /* too many IRQs if a signal */
 328         int dsr_chkcount;       /* is floating */
 329         int ri_chkcount;
 330
 331         char *bufs;             /* virtual address of DMA buffer lists */
 332         dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
 333
 334         unsigned int rbuf_count;
 335         struct slgt_desc *rbufs;
 336         unsigned int rbuf_current;
 337         unsigned int rbuf_index;
 338         unsigned int rbuf_fill_index;
 339         unsigned short rbuf_fill_count;
 340
 341         unsigned int tbuf_count;
 342         struct slgt_desc *tbufs;
 343         unsigned int tbuf_current;
 344         unsigned int tbuf_start;
 345
 346         unsigned char *tmp_rbuf;
 347         unsigned int tmp_rbuf_count;
 348
 349         /* SPPP/Cisco HDLC device parts */
 350
 351         int netcount;
 352         spinlock_t netlock;
 353 #if SYNCLINK_GENERIC_HDLC
 354         struct net_device *netdev;
 355 #endif
 356
 357 };
 358
 359 static MGSL_PARAMS default_params = {
 360         .mode            = MGSL_MODE_HDLC,
 361         .loopback        = 0,
 362         .flags           = HDLC_FLAG_UNDERRUN_ABORT15,
 363         .encoding        = HDLC_ENCODING_NRZI_SPACE,
 364         .clock_speed     = 0,
 365         .addr_filter     = 0xff,
 366         .crc_type        = HDLC_CRC_16_CCITT,
 367         .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
 368         .preamble        = HDLC_PREAMBLE_PATTERN_NONE,
 369         .data_rate       = 9600,
 370         .data_bits       = 8,
 371         .stop_bits       = 1,
 372         .parity          = ASYNC_PARITY_NONE
 373 };
 374
 375
 376 #define BH_RECEIVE  1
 377 #define BH_TRANSMIT 2
 378 #define BH_STATUS   4
 379 #define IO_PIN_SHUTDOWN_LIMIT 100
 380
 381 #define DMABUFSIZE 256
 382 #define DESC_LIST_SIZE 4096
 383
 384 #define MASK_PARITY  BIT1
 385 #define MASK_FRAMING BIT0
 386 #define MASK_BREAK   BIT14
 387 #define MASK_OVERRUN BIT4
 388
 389 #define GSR   0x00 /* global status */
 390 #define JCR   0x04 /* JTAG control */
 391 #define IODR  0x08 /* GPIO direction */
 392 #define IOER  0x0c /* GPIO interrupt enable */
 393 #define IOVR  0x10 /* GPIO value */
 394 #define IOSR  0x14 /* GPIO interrupt status */
 395 #define TDR   0x80 /* tx data */
 396 #define RDR   0x80 /* rx data */
 397 #define TCR   0x82 /* tx control */
 398 #define TIR   0x84 /* tx idle */
 399 #define TPR   0x85 /* tx preamble */
 400 #define RCR   0x86 /* rx control */
 401 #define VCR   0x88 /* V.24 control */
 402 #define CCR   0x89 /* clock control */
 403 #define BDR   0x8a /* baud divisor */
 404 #define SCR   0x8c /* serial control */
 405 #define SSR   0x8e /* serial status */
 406 #define RDCSR 0x90 /* rx DMA control/status */
 407 #define TDCSR 0x94 /* tx DMA control/status */
 408 #define RDDAR 0x98 /* rx DMA descriptor address */
 409 #define TDDAR 0x9c /* tx DMA descriptor address */
 410 #define XSR   0x40 /* extended sync pattern */
 411 #define XCR   0x44 /* extended control */
 412
 413 #define RXIDLE      BIT14
 414 #define RXBREAK     BIT14
 415 #define IRQ_TXDATA  BIT13
 416 #define IRQ_TXIDLE  BIT12
 417 #define IRQ_TXUNDER BIT11 /* HDLC */
 418 #define IRQ_RXDATA  BIT10
 419 #define IRQ_RXIDLE  BIT9  /* HDLC */
 420 #define IRQ_RXBREAK BIT9  /* async */
 421 #define IRQ_RXOVER  BIT8
 422 #define IRQ_DSR     BIT7
 423 #define IRQ_CTS     BIT6
 424 #define IRQ_DCD     BIT5
 425 #define IRQ_RI      BIT4
 426 #define IRQ_ALL     0x3ff0
 427 #define IRQ_MASTER  BIT0
 428
 429 #define slgt_irq_on(info, mask) \
 430         wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
 431 #define slgt_irq_off(info, mask) \
 432         wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
 433
 434 static __u8  rd_reg8(struct slgt_info *info, unsigned int addr);
 435 static void  wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
 436 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
 437 static void  wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
 438 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
 439 static void  wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
 440
 441 static void  msc_set_vcr(struct slgt_info *info);
 442
 443 static int  startup(struct slgt_info *info);
 444 static int  block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
 445 static void shutdown(struct slgt_info *info);
 446 static void program_hw(struct slgt_info *info);
 447 static void change_params(struct slgt_info *info);
 448
 449 static int  register_test(struct slgt_info *info);
 450 static int  irq_test(struct slgt_info *info);
 451 static int  loopback_test(struct slgt_info *info);
 452 static int  adapter_test(struct slgt_info *info);
 453
 454 static void reset_adapter(struct slgt_info *info);
 455 static void reset_port(struct slgt_info *info);
 456 static void async_mode(struct slgt_info *info);
 457 static void sync_mode(struct slgt_info *info);
 458
 459 static void rx_stop(struct slgt_info *info);
 460 static void rx_start(struct slgt_info *info);
 461 static void reset_rbufs(struct slgt_info *info);
 462 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
 463 static void rdma_reset(struct slgt_info *info);
 464 static bool rx_get_frame(struct slgt_info *info);
 465 static bool rx_get_buf(struct slgt_info *info);
 466
 467 static void tx_start(struct slgt_info *info);
 468 static void tx_stop(struct slgt_info *info);
 469 static void tx_set_idle(struct slgt_info *info);
 470 static unsigned int free_tbuf_count(struct slgt_info *info);
 471 static unsigned int tbuf_bytes(struct slgt_info *info);
 472 static void reset_tbufs(struct slgt_info *info);
 473 static void tdma_reset(struct slgt_info *info);
 474 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
 475
 476 static void get_signals(struct slgt_info *info);
 477 static void set_signals(struct slgt_info *info);
 478 static void enable_loopback(struct slgt_info *info);
 479 static void set_rate(struct slgt_info *info, u32 data_rate);
 480
 481 static int  bh_action(struct slgt_info *info);
 482 static void bh_handler(struct work_struct *work);
 483 static void bh_transmit(struct slgt_info *info);
 484 static void isr_serial(struct slgt_info *info);
 485 static void isr_rdma(struct slgt_info *info);
 486 static void isr_txeom(struct slgt_info *info, unsigned short status);
 487 static void isr_tdma(struct slgt_info *info);
 488
 489 static int  alloc_dma_bufs(struct slgt_info *info);
 490 static void free_dma_bufs(struct slgt_info *info);
 491 static int  alloc_desc(struct slgt_info *info);
 492 static void free_desc(struct slgt_info *info);
 493 static int  alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
 494 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
 495
 496 static int  alloc_tmp_rbuf(struct slgt_info *info);
 497 static void free_tmp_rbuf(struct slgt_info *info);
 498
 499 static void tx_timeout(unsigned long context);
 500 static void rx_timeout(unsigned long context);
 501
 502 /*
 503  * ioctl handlers
 504  */
 505 static int  get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
 506 static int  get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
 507 static int  set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
 508 static int  get_txidle(struct slgt_info *info, int __user *idle_mode);
 509 static int  set_txidle(struct slgt_info *info, int idle_mode);
 510 static int  tx_enable(struct slgt_info *info, int enable);
 511 static int  tx_abort(struct slgt_info *info);
 512 static int  rx_enable(struct slgt_info *info, int enable);
 513 static int  modem_input_wait(struct slgt_info *info,int arg);
 514 static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
 515 static int  tiocmget(struct tty_struct *tty);
 516 static int  tiocmset(struct tty_struct *tty,
 517                                 unsigned int set, unsigned int clear);
 518 static int set_break(struct tty_struct *tty, int break_state);
 519 static int  get_interface(struct slgt_info *info, int __user *if_mode);
 520 static int  set_interface(struct slgt_info *info, int if_mode);
 521 static int  set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
 522 static int  get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
 523 static int  wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
 524 static int  get_xsync(struct slgt_info *info, int __user *if_mode);
 525 static int  set_xsync(struct slgt_info *info, int if_mode);
 526 static int  get_xctrl(struct slgt_info *info, int __user *if_mode);
 527 static int  set_xctrl(struct slgt_info *info, int if_mode);
 528
 529 /*
 530  * driver functions
 531  */
 532 static void add_device(struct slgt_info *info);
 533 static void device_init(int adapter_num, struct pci_dev *pdev);
 534 static int  claim_resources(struct slgt_info *info);
 535 static void release_resources(struct slgt_info *info);
 536
 537 /*
 538  * DEBUG OUTPUT CODE
 539  */
 540 #ifndef DBGINFO
 541 #define DBGINFO(fmt)
 542 #endif
 543 #ifndef DBGERR
 544 #define DBGERR(fmt)
 545 #endif
 546 #ifndef DBGBH
 547 #define DBGBH(fmt)
 548 #endif
 549 #ifndef DBGISR
 550 #define DBGISR(fmt)
 551 #endif
 552
 553 #ifdef DBGDATA
 554 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
 555 {
 556         int i;
 557         int linecount;
 558         printk("%s %s data:\n",info->device_name, label);
 559         while(count) {
 560                 linecount = (count > 16) ? 16 : count;
 561                 for(i=0; i < linecount; i++)
 562                         printk("%02X ",(unsigned char)data[i]);
 563                 for(;i<17;i++)
 564                         printk("   ");
 565                 for(i=0;i<linecount;i++) {
 566                         if (data[i]>=040 && data[i]<=0176)
 567                                 printk("%c",data[i]);
 568                         else
 569                                 printk(".");
 570                 }
 571                 printk("\n");
 572                 data  += linecount;
 573                 count -= linecount;
 574         }
 575 }
 576 #else
 577 #define DBGDATA(info, buf, size, label)
 578 #endif
 579
 580 #ifdef DBGTBUF
 581 static void dump_tbufs(struct slgt_info *info)
 582 {
 583         int i;
 584         printk("tbuf_current=%d\n", info->tbuf_current);
 585         for (i=0 ; i < info->tbuf_count ; i++) {
 586                 printk("%d: count=%04X status=%04X\n",
 587                         i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
 588         }
 589 }
 590 #else
 591 #define DBGTBUF(info)
 592 #endif
 593
 594 #ifdef DBGRBUF
 595 static void dump_rbufs(struct slgt_info *info)
 596 {
 597         int i;
 598         printk("rbuf_current=%d\n", info->rbuf_current);
 599         for (i=0 ; i < info->rbuf_count ; i++) {
 600                 printk("%d: count=%04X status=%04X\n",
 601                         i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
 602         }
 603 }
 604 #else
 605 #define DBGRBUF(info)
 606 #endif
 607
 608 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
 609 {
 610 #ifdef SANITY_CHECK
 611         if (!info) {
 612                 printk("null struct slgt_info for (%s) in %s\n", devname, name);
 613                 return 1;
 614         }
 615         if (info->magic != MGSL_MAGIC) {
 616                 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
 617                 return 1;
 618         }
 619 #else
 620         if (!info)
 621                 return 1;
 622 #endif
 623         return 0;
 624 }
 625
 626 /**
 627  * line discipline callback wrappers
 628  *
 629  * The wrappers maintain line discipline references
 630  * while calling into the line discipline.
 631  *
 632  * ldisc_receive_buf  - pass receive data to line discipline
 633  */
 634 static void ldisc_receive_buf(struct tty_struct *tty,
 635                               const __u8 *data, char *flags, int count)
 636 {
 637         struct tty_ldisc *ld;
 638         if (!tty)
 639                 return;
 640         ld = tty_ldisc_ref(tty);
 641         if (ld) {
 642                 if (ld->ops->receive_buf)
 643                         ld->ops->receive_buf(tty, data, flags, count);
 644                 tty_ldisc_deref(ld);
 645         }
 646 }
 647
 648 /* tty callbacks */
 649
 650 static int open(struct tty_struct *tty, struct file *filp)
 651 {
 652         struct slgt_info *info;
 653         int retval, line;
 654         unsigned long flags;
 655
 656         line = tty->index;
 657         if (line >= slgt_device_count) {
 658                 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
 659                 return -ENODEV;
 660         }
 661
 662         info = slgt_device_list;
 663         while(info && info->line != line)
 664                 info = info->next_device;
 665         if (sanity_check(info, tty->name, "open"))
 666                 return -ENODEV;
 667         if (info->init_error) {
 668                 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
 669                 return -ENODEV;
 670         }
 671
 672         tty->driver_data = info;
 673         info->port.tty = tty;
 674
 675         DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
 676
 677         /* If port is closing, signal caller to try again */
 678         if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
 679                 if (info->port.flags & ASYNC_CLOSING)
 680                         interruptible_sleep_on(&info->port.close_wait);
 681                 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 682                         -EAGAIN : -ERESTARTSYS);
 683                 goto cleanup;
 684         }
 685
 686         mutex_lock(&info->port.mutex);
 687         info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 688
 689         spin_lock_irqsave(&info->netlock, flags);
 690         if (info->netcount) {
 691                 retval = -EBUSY;
 692                 spin_unlock_irqrestore(&info->netlock, flags);
 693                 mutex_unlock(&info->port.mutex);
 694                 goto cleanup;
 695         }
 696         info->port.count++;
 697         spin_unlock_irqrestore(&info->netlock, flags);
 698
 699         if (info->port.count == 1) {
 700                 /* 1st open on this device, init hardware */
 701                 retval = startup(info);
 702                 if (retval < 0) {
 703                         mutex_unlock(&info->port.mutex);
 704                         goto cleanup;
 705                 }
 706         }
 707         mutex_unlock(&info->port.mutex);
 708         retval = block_til_ready(tty, filp, info);
 709         if (retval) {
 710                 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
 711                 goto cleanup;
 712         }
 713
 714         retval = 0;
 715
 716 cleanup:
 717         if (retval) {
 718                 if (tty->count == 1)
 719                         info->port.tty = NULL; /* tty layer will release tty struct */
 720                 if(info->port.count)
 721                         info->port.count--;
 722         }
 723
 724         DBGINFO(("%s open rc=%d\n", info->device_name, retval));
 725         return retval;
 726 }
 727
 728 static void close(struct tty_struct *tty, struct file *filp)
 729 {
 730         struct slgt_info *info = tty->driver_data;
 731
 732         if (sanity_check(info, tty->name, "close"))
 733                 return;
 734         DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
 735
 736         if (tty_port_close_start(&info->port, tty, filp) == 0)
 737                 goto cleanup;
 738
 739         mutex_lock(&info->port.mutex);
 740         if (info->port.flags & ASYNC_INITIALIZED)
 741                 wait_until_sent(tty, info->timeout);
 742         flush_buffer(tty);
 743         tty_ldisc_flush(tty);
 744
 745         shutdown(info);
 746         mutex_unlock(&info->port.mutex);
 747
 748         tty_port_close_end(&info->port, tty);
 749         info->port.tty = NULL;
 750 cleanup:
 751         DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
 752 }
 753
 754 static void hangup(struct tty_struct *tty)
 755 {
 756         struct slgt_info *info = tty->driver_data;
 757         unsigned long flags;
 758
 759         if (sanity_check(info, tty->name, "hangup"))
 760                 return;
 761         DBGINFO(("%s hangup\n", info->device_name));
 762
 763         flush_buffer(tty);
 764
 765         mutex_lock(&info->port.mutex);
 766         shutdown(info);
 767
 768         spin_lock_irqsave(&info->port.lock, flags);
 769         info->port.count = 0;
 770         info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 771         info->port.tty = NULL;
 772         spin_unlock_irqrestore(&info->port.lock, flags);
 773         mutex_unlock(&info->port.mutex);
 774
 775         wake_up_interruptible(&info->port.open_wait);
 776 }
 777
 778 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 779 {
 780         struct slgt_info *info = tty->driver_data;
 781         unsigned long flags;
 782
 783         DBGINFO(("%s set_termios\n", tty->driver->name));
 784
 785         change_params(info);
 786
 787         /* Handle transition to B0 status */
 788         if (old_termios->c_cflag & CBAUD &&
 789             !(tty->termios->c_cflag & CBAUD)) {
 790                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
 791                 spin_lock_irqsave(&info->lock,flags);
 792                 set_signals(info);
 793                 spin_unlock_irqrestore(&info->lock,flags);
 794         }
 795
 796         /* Handle transition away from B0 status */
 797         if (!(old_termios->c_cflag & CBAUD) &&
 798             tty->termios->c_cflag & CBAUD) {
 799                 info->signals |= SerialSignal_DTR;
 800                 if (!(tty->termios->c_cflag & CRTSCTS) ||
 801                     !test_bit(TTY_THROTTLED, &tty->flags)) {
 802                         info->signals |= SerialSignal_RTS;
 803                 }
 804                 spin_lock_irqsave(&info->lock,flags);
 805                 set_signals(info);
 806                 spin_unlock_irqrestore(&info->lock,flags);
 807         }
 808
 809         /* Handle turning off CRTSCTS */
 810         if (old_termios->c_cflag & CRTSCTS &&
 811             !(tty->termios->c_cflag & CRTSCTS)) {
 812                 tty->hw_stopped = 0;
 813                 tx_release(tty);
 814         }
 815 }
 816
 817 static void update_tx_timer(struct slgt_info *info)
 818 {
 819         /*
 820          * use worst case speed of 1200bps to calculate transmit timeout
 821          * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
 822          */
 823         if (info->params.mode == MGSL_MODE_HDLC) {
 824                 int timeout  = (tbuf_bytes(info) * 7) + 1000;
 825                 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout));
 826         }
 827 }
 828
 829 static int write(struct tty_struct *tty,
 830                  const unsigned char *buf, int count)
 831 {
 832         int ret = 0;
 833         struct slgt_info *info = tty->driver_data;
 834         unsigned long flags;
 835
 836         if (sanity_check(info, tty->name, "write"))
 837                 return -EIO;
 838
 839         DBGINFO(("%s write count=%d\n", info->device_name, count));
 840
 841         if (!info->tx_buf || (count > info->max_frame_size))
 842                 return -EIO;
 843
 844         if (!count || tty->stopped || tty->hw_stopped)
 845                 return 0;
 846
 847         spin_lock_irqsave(&info->lock, flags);
 848
 849         if (info->tx_count) {
 850                 /* send accumulated data from send_char() */
 851                 if (!tx_load(info, info->tx_buf, info->tx_count))
 852                         goto cleanup;
 853                 info->tx_count = 0;
 854         }
 855
 856         if (tx_load(info, buf, count))
 857                 ret = count;
 858
 859 cleanup:
 860         spin_unlock_irqrestore(&info->lock, flags);
 861         DBGINFO(("%s write rc=%d\n", info->device_name, ret));
 862         return ret;
 863 }
 864
 865 static int put_char(struct tty_struct *tty, unsigned char ch)
 866 {
 867         struct slgt_info *info = tty->driver_data;
 868         unsigned long flags;
 869         int ret = 0;
 870
 871         if (sanity_check(info, tty->name, "put_char"))
 872                 return 0;
 873         DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
 874         if (!info->tx_buf)
 875                 return 0;
 876         spin_lock_irqsave(&info->lock,flags);
 877         if (info->tx_count < info->max_frame_size) {
 878                 info->tx_buf[info->tx_count++] = ch;
 879                 ret = 1;
 880         }
 881         spin_unlock_irqrestore(&info->lock,flags);
 882         return ret;
 883 }
 884
 885 static void send_xchar(struct tty_struct *tty, char ch)
 886 {
 887         struct slgt_info *info = tty->driver_data;
 888         unsigned long flags;
 889
 890         if (sanity_check(info, tty->name, "send_xchar"))
 891                 return;
 892         DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
 893         info->x_char = ch;
 894         if (ch) {
 895                 spin_lock_irqsave(&info->lock,flags);
 896                 if (!info->tx_enabled)
 897                         tx_start(info);
 898                 spin_unlock_irqrestore(&info->lock,flags);
 899         }
 900 }
 901
 902 static void wait_until_sent(struct tty_struct *tty, int timeout)
 903 {
 904         struct slgt_info *info = tty->driver_data;
 905         unsigned long orig_jiffies, char_time;
 906
 907         if (!info )
 908                 return;
 909         if (sanity_check(info, tty->name, "wait_until_sent"))
 910                 return;
 911         DBGINFO(("%s wait_until_sent entry\n", info->device_name));
 912         if (!(info->port.flags & ASYNC_INITIALIZED))
 913                 goto exit;
 914
 915         orig_jiffies = jiffies;
 916
 917         /* Set check interval to 1/5 of estimated time to
 918          * send a character, and make it at least 1. The check
 919          * interval should also be less than the timeout.
 920          * Note: use tight timings here to satisfy the NIST-PCTS.
 921          */
 922
 923         if (info->params.data_rate) {
 924                 char_time = info->timeout/(32 * 5);
 925                 if (!char_time)
 926                         char_time++;
 927         } else
 928                 char_time = 1;
 929
 930         if (timeout)
 931                 char_time = min_t(unsigned long, char_time, timeout);
 932
 933         while (info->tx_active) {
 934                 msleep_interruptible(jiffies_to_msecs(char_time));
 935                 if (signal_pending(current))
 936                         break;
 937                 if (timeout && time_after(jiffies, orig_jiffies + timeout))
 938                         break;
 939         }
 940 exit:
 941         DBGINFO(("%s wait_until_sent exit\n", info->device_name));
 942 }
 943
 944 static int write_room(struct tty_struct *tty)
 945 {
 946         struct slgt_info *info = tty->driver_data;
 947         int ret;
 948
 949         if (sanity_check(info, tty->name, "write_room"))
 950                 return 0;
 951         ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
 952         DBGINFO(("%s write_room=%d\n", info->device_name, ret));
 953         return ret;
 954 }
 955
 956 static void flush_chars(struct tty_struct *tty)
 957 {
 958         struct slgt_info *info = tty->driver_data;
 959         unsigned long flags;
 960
 961         if (sanity_check(info, tty->name, "flush_chars"))
 962                 return;
 963         DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
 964
 965         if (info->tx_count <= 0 || tty->stopped ||
 966             tty->hw_stopped || !info->tx_buf)
 967                 return;
 968
 969         DBGINFO(("%s flush_chars start transmit\n", info->device_name));
 970
 971         spin_lock_irqsave(&info->lock,flags);
 972         if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
 973                 info->tx_count = 0;
 974         spin_unlock_irqrestore(&info->lock,flags);
 975 }
 976
 977 static void flush_buffer(struct tty_struct *tty)
 978 {
 979         struct slgt_info *info = tty->driver_data;
 980         unsigned long flags;
 981
 982         if (sanity_check(info, tty->name, "flush_buffer"))
 983                 return;
 984         DBGINFO(("%s flush_buffer\n", info->device_name));
 985
 986         spin_lock_irqsave(&info->lock, flags);
 987         info->tx_count = 0;
 988         spin_unlock_irqrestore(&info->lock, flags);
 989
 990         tty_wakeup(tty);
 991 }
 992
 993 /*
 994  * throttle (stop) transmitter
 995  */
 996 static void tx_hold(struct tty_struct *tty)
 997 {
 998         struct slgt_info *info = tty->driver_data;
 999         unsigned long flags;
1000
1001         if (sanity_check(info, tty->name, "tx_hold"))
1002                 return;
1003         DBGINFO(("%s tx_hold\n", info->device_name));
1004         spin_lock_irqsave(&info->lock,flags);
1005         if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
1006                 tx_stop(info);
1007         spin_unlock_irqrestore(&info->lock,flags);
1008 }
1009
1010 /*
1011  * release (start) transmitter
1012  */
1013 static void tx_release(struct tty_struct *tty)
1014 {
1015         struct slgt_info *info = tty->driver_data;
1016         unsigned long flags;
1017
1018         if (sanity_check(info, tty->name, "tx_release"))
1019                 return;
1020         DBGINFO(("%s tx_release\n", info->device_name));
1021         spin_lock_irqsave(&info->lock, flags);
1022         if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
1023                 info->tx_count = 0;
1024         spin_unlock_irqrestore(&info->lock, flags);
1025 }
1026
1027 /*
1028  * Service an IOCTL request
1029  *
1030  * Arguments
1031  *
1032  *      tty     pointer to tty instance data
1033  *      cmd     IOCTL command code
1034  *      arg     command argument/context
1035  *
1036  * Return 0 if success, otherwise error code
1037  */
1038 static int ioctl(struct tty_struct *tty,
1039                  unsigned int cmd, unsigned long arg)
1040 {
1041         struct slgt_info *info = tty->driver_data;
1042         void __user *argp = (void __user *)arg;
1043         int ret;
1044
1045         if (sanity_check(info, tty->name, "ioctl"))
1046                 return -ENODEV;
1047         DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1048
1049         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1050             (cmd != TIOCMIWAIT)) {
1051                 if (tty->flags & (1 << TTY_IO_ERROR))
1052                     return -EIO;
1053         }
1054
1055         switch (cmd) {
1056         case MGSL_IOCWAITEVENT:
1057                 return wait_mgsl_event(info, argp);
1058         case TIOCMIWAIT:
1059                 return modem_input_wait(info,(int)arg);
1060         case MGSL_IOCSGPIO:
1061                 return set_gpio(info, argp);
1062         case MGSL_IOCGGPIO:
1063                 return get_gpio(info, argp);
1064         case MGSL_IOCWAITGPIO:
1065                 return wait_gpio(info, argp);
1066         case MGSL_IOCGXSYNC:
1067                 return get_xsync(info, argp);
1068         case MGSL_IOCSXSYNC:
1069                 return set_xsync(info, (int)arg);
1070         case MGSL_IOCGXCTRL:
1071                 return get_xctrl(info, argp);
1072         case MGSL_IOCSXCTRL:
1073                 return set_xctrl(info, (int)arg);
1074         }
1075         mutex_lock(&info->port.mutex);
1076         switch (cmd) {
1077         case MGSL_IOCGPARAMS:
1078                 ret = get_params(info, argp);
1079                 break;
1080         case MGSL_IOCSPARAMS:
1081                 ret = set_params(info, argp);
1082                 break;
1083         case MGSL_IOCGTXIDLE:
1084                 ret = get_txidle(info, argp);
1085                 break;
1086         case MGSL_IOCSTXIDLE:
1087                 ret = set_txidle(info, (int)arg);
1088                 break;
1089         case MGSL_IOCTXENABLE:
1090                 ret = tx_enable(info, (int)arg);
1091                 break;
1092         case MGSL_IOCRXENABLE:
1093                 ret = rx_enable(info, (int)arg);
1094                 break;
1095         case MGSL_IOCTXABORT:
1096                 ret = tx_abort(info);
1097                 break;
1098         case MGSL_IOCGSTATS:
1099                 ret = get_stats(info, argp);
1100                 break;
1101         case MGSL_IOCGIF:
1102                 ret = get_interface(info, argp);
1103                 break;
1104         case MGSL_IOCSIF:
1105                 ret = set_interface(info,(int)arg);
1106                 break;
1107         default:
1108                 ret = -ENOIOCTLCMD;
1109         }
1110         mutex_unlock(&info->port.mutex);
1111         return ret;
1112 }
1113
1114 static int get_icount(struct tty_struct *tty,
1115                                 struct serial_icounter_struct *icount)
1116
1117 {
1118         struct slgt_info *info = tty->driver_data;
1119         struct mgsl_icount cnow;        /* kernel counter temps */
1120         unsigned long flags;
1121
1122         spin_lock_irqsave(&info->lock,flags);
1123         cnow = info->icount;
1124         spin_unlock_irqrestore(&info->lock,flags);
1125
1126         icount->cts = cnow.cts;
1127         icount->dsr = cnow.dsr;
1128         icount->rng = cnow.rng;
1129         icount->dcd = cnow.dcd;
1130         icount->rx = cnow.rx;
1131         icount->tx = cnow.tx;
1132         icount->frame = cnow.frame;
1133         icount->overrun = cnow.overrun;
1134         icount->parity = cnow.parity;
1135         icount->brk = cnow.brk;
1136         icount->buf_overrun = cnow.buf_overrun;
1137
1138         return 0;
1139 }
1140
1141 /*
1142  * support for 32 bit ioctl calls on 64 bit systems
1143  */
1144 #ifdef CONFIG_COMPAT
1145 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1146 {
1147         struct MGSL_PARAMS32 tmp_params;
1148
1149         DBGINFO(("%s get_params32\n", info->device_name));
1150         memset(&tmp_params, 0, sizeof(tmp_params));
1151         tmp_params.mode            = (compat_ulong_t)info->params.mode;
1152         tmp_params.loopback        = info->params.loopback;
1153         tmp_params.flags           = info->params.flags;
1154         tmp_params.encoding        = info->params.encoding;
1155         tmp_params.clock_speed     = (compat_ulong_t)info->params.clock_speed;
1156         tmp_params.addr_filter     = info->params.addr_filter;
1157         tmp_params.crc_type        = info->params.crc_type;
1158         tmp_params.preamble_length = info->params.preamble_length;
1159         tmp_params.preamble        = info->params.preamble;
1160         tmp_params.data_rate       = (compat_ulong_t)info->params.data_rate;
1161         tmp_params.data_bits       = info->params.data_bits;
1162         tmp_params.stop_bits       = info->params.stop_bits;
1163         tmp_params.parity          = info->params.parity;
1164         if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1165                 return -EFAULT;
1166         return 0;
1167 }
1168
1169 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1170 {
1171         struct MGSL_PARAMS32 tmp_params;
1172
1173         DBGINFO(("%s set_params32\n", info->device_name));
1174         if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1175                 return -EFAULT;
1176
1177         spin_lock(&info->lock);
1178         if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
1179                 info->base_clock = tmp_params.clock_speed;
1180         } else {
1181                 info->params.mode            = tmp_params.mode;
1182                 info->params.loopback        = tmp_params.loopback;
1183                 info->params.flags           = tmp_params.flags;
1184                 info->params.encoding        = tmp_params.encoding;
1185                 info->params.clock_speed     = tmp_params.clock_speed;
1186                 info->params.addr_filter     = tmp_params.addr_filter;
1187                 info->params.crc_type        = tmp_params.crc_type;
1188                 info->params.preamble_length = tmp_params.preamble_length;
1189                 info->params.preamble        = tmp_params.preamble;
1190                 info->params.data_rate       = tmp_params.data_rate;
1191                 info->params.data_bits       = tmp_params.data_bits;
1192                 info->params.stop_bits       = tmp_params.stop_bits;
1193                 info->params.parity          = tmp_params.parity;
1194         }
1195         spin_unlock(&info->lock);
1196
1197         program_hw(info);
1198
1199         return 0;
1200 }
1201
1202 static long slgt_compat_ioctl(struct tty_struct *tty,
1203                          unsigned int cmd, unsigned long arg)
1204 {
1205         struct slgt_info *info = tty->driver_data;
1206         int rc = -ENOIOCTLCMD;
1207
1208         if (sanity_check(info, tty->name, "compat_ioctl"))
1209                 return -ENODEV;
1210         DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1211
1212         switch (cmd) {
1213
1214         case MGSL_IOCSPARAMS32:
1215                 rc = set_params32(info, compat_ptr(arg));
1216                 break;
1217
1218         case MGSL_IOCGPARAMS32:
1219                 rc = get_params32(info, compat_ptr(arg));
1220                 break;
1221
1222         case MGSL_IOCGPARAMS:
1223         case MGSL_IOCSPARAMS:
1224         case MGSL_IOCGTXIDLE:
1225         case MGSL_IOCGSTATS:
1226         case MGSL_IOCWAITEVENT:
1227         case MGSL_IOCGIF:
1228         case MGSL_IOCSGPIO:
1229         case MGSL_IOCGGPIO:
1230         case MGSL_IOCWAITGPIO:
1231         case MGSL_IOCGXSYNC:
1232         case MGSL_IOCGXCTRL:
1233         case MGSL_IOCSTXIDLE:
1234         case MGSL_IOCTXENABLE:
1235         case MGSL_IOCRXENABLE:
1236         case MGSL_IOCTXABORT:
1237         case TIOCMIWAIT:
1238         case MGSL_IOCSIF:
1239         case MGSL_IOCSXSYNC:
1240         case MGSL_IOCSXCTRL:
1241                 rc = ioctl(tty, cmd, arg);
1242                 break;
1243         }
1244
1245         DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1246         return rc;
1247 }
1248 #else
1249 #define slgt_compat_ioctl NULL
1250 #endif /* ifdef CONFIG_COMPAT */
1251
1252 /*
1253  * proc fs support
1254  */
1255 static inline void line_info(struct seq_file *m, struct slgt_info *info)
1256 {
1257         char stat_buf[30];
1258         unsigned long flags;
1259
1260         seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1261                       info->device_name, info->phys_reg_addr,
1262                       info->irq_level, info->max_frame_size);
1263
1264         /* output current serial signal states */
1265         spin_lock_irqsave(&info->lock,flags);
1266         get_signals(info);
1267         spin_unlock_irqrestore(&info->lock,flags);
1268
1269         stat_buf[0] = 0;
1270         stat_buf[1] = 0;
1271         if (info->signals & SerialSignal_RTS)
1272                 strcat(stat_buf, "|RTS");
1273         if (info->signals & SerialSignal_CTS)
1274                 strcat(stat_buf, "|CTS");
1275         if (info->signals & SerialSignal_DTR)
1276                 strcat(stat_buf, "|DTR");
1277         if (info->signals & SerialSignal_DSR)
1278                 strcat(stat_buf, "|DSR");
1279         if (info->signals & SerialSignal_DCD)
1280                 strcat(stat_buf, "|CD");
1281         if (info->signals & SerialSignal_RI)
1282                 strcat(stat_buf, "|RI");
1283
1284         if (info->params.mode != MGSL_MODE_ASYNC) {
1285                 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1286                                info->icount.txok, info->icount.rxok);
1287                 if (info->icount.txunder)
1288                         seq_printf(m, " txunder:%d", info->icount.txunder);
1289                 if (info->icount.txabort)
1290                         seq_printf(m, " txabort:%d", info->icount.txabort);
1291                 if (info->icount.rxshort)
1292                         seq_printf(m, " rxshort:%d", info->icount.rxshort);
1293                 if (info->icount.rxlong)
1294                         seq_printf(m, " rxlong:%d", info->icount.rxlong);
1295                 if (info->icount.rxover)
1296                         seq_printf(m, " rxover:%d", info->icount.rxover);
1297                 if (info->icount.rxcrc)
1298                         seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
1299         } else {
1300                 seq_printf(m, "\tASYNC tx:%d rx:%d",
1301                                info->icount.tx, info->icount.rx);
1302                 if (info->icount.frame)
1303                         seq_printf(m, " fe:%d", info->icount.frame);
1304                 if (info->icount.parity)
1305                         seq_printf(m, " pe:%d", info->icount.parity);
1306                 if (info->icount.brk)
1307                         seq_printf(m, " brk:%d", info->icount.brk);
1308                 if (info->icount.overrun)
1309                         seq_printf(m, " oe:%d", info->icount.overrun);
1310         }
1311
1312         /* Append serial signal status to end */
1313         seq_printf(m, " %s\n", stat_buf+1);
1314
1315         seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1316                        info->tx_active,info->bh_requested,info->bh_running,
1317                        info->pending_bh);
1318 }
1319
1320 /* Called to print information about devices
1321  */
1322 static int synclink_gt_proc_show(struct seq_file *m, void *v)
1323 {
1324         struct slgt_info *info;
1325
1326         seq_puts(m, "synclink_gt driver\n");
1327
1328         info = slgt_device_list;
1329         while( info ) {
1330                 line_info(m, info);
1331                 info = info->next_device;
1332         }
1333         return 0;
1334 }
1335
1336 static int synclink_gt_proc_open(struct inode *inode, struct file *file)
1337 {
1338         return single_open(file, synclink_gt_proc_show, NULL);
1339 }
1340
1341 static const struct file_operations synclink_gt_proc_fops = {
1342         .owner          = THIS_MODULE,
1343         .open           = synclink_gt_proc_open,
1344         .read           = seq_read,
1345         .llseek         = seq_lseek,
1346         .release        = single_release,
1347 };
1348
1349 /*
1350  * return count of bytes in transmit buffer
1351  */
1352 static int chars_in_buffer(struct tty_struct *tty)
1353 {
1354         struct slgt_info *info = tty->driver_data;
1355         int count;
1356         if (sanity_check(info, tty->name, "chars_in_buffer"))
1357                 return 0;
1358         count = tbuf_bytes(info);
1359         DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
1360         return count;
1361 }
1362
1363 /*
1364  * signal remote device to throttle send data (our receive data)
1365  */
1366 static void throttle(struct tty_struct * tty)
1367 {
1368         struct slgt_info *info = tty->driver_data;
1369         unsigned long flags;
1370
1371         if (sanity_check(info, tty->name, "throttle"))
1372                 return;
1373         DBGINFO(("%s throttle\n", info->device_name));
1374         if (I_IXOFF(tty))
1375                 send_xchar(tty, STOP_CHAR(tty));
1376         if (tty->termios->c_cflag & CRTSCTS) {
1377                 spin_lock_irqsave(&info->lock,flags);
1378                 info->signals &= ~SerialSignal_RTS;
1379                 set_signals(info);
1380                 spin_unlock_irqrestore(&info->lock,flags);
1381         }
1382 }
1383
1384 /*
1385  * signal remote device to stop throttling send data (our receive data)
1386  */
1387 static void unthrottle(struct tty_struct * tty)
1388 {
1389         struct slgt_info *info = tty->driver_data;
1390         unsigned long flags;
1391
1392         if (sanity_check(info, tty->name, "unthrottle"))
1393                 return;
1394         DBGINFO(("%s unthrottle\n", info->device_name));
1395         if (I_IXOFF(tty)) {
1396                 if (info->x_char)
1397                         info->x_char = 0;
1398                 else
1399                         send_xchar(tty, START_CHAR(tty));
1400         }
1401         if (tty->termios->c_cflag & CRTSCTS) {
1402                 spin_lock_irqsave(&info->lock,flags);
1403                 info->signals |= SerialSignal_RTS;
1404                 set_signals(info);
1405                 spin_unlock_irqrestore(&info->lock,flags);
1406         }
1407 }
1408
1409 /*
1410  * set or clear transmit break condition
1411  * break_state  -1=set break condition, 0=clear
1412  */
1413 static int set_break(struct tty_struct *tty, int break_state)
1414 {
1415         struct slgt_info *info = tty->driver_data;
1416         unsigned short value;
1417         unsigned long flags;
1418
1419         if (sanity_check(info, tty->name, "set_break"))
1420                 return -EINVAL;
1421         DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1422
1423         spin_lock_irqsave(&info->lock,flags);
1424         value = rd_reg16(info, TCR);
1425         if (break_state == -1)
1426                 value |= BIT6;
1427         else
1428                 value &= ~BIT6;
1429         wr_reg16(info, TCR, value);
1430         spin_unlock_irqrestore(&info->lock,flags);
1431         return 0;
1432 }
1433
1434 #if SYNCLINK_GENERIC_HDLC
1435
1436 /**
1437  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1438  * set encoding and frame check sequence (FCS) options
1439  *
1440  * dev       pointer to network device structure
1441  * encoding  serial encoding setting
1442  * parity    FCS setting
1443  *
1444  * returns 0 if success, otherwise error code
1445  */
1446 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1447                           unsigned short parity)
1448 {
1449         struct slgt_info *info = dev_to_port(dev);
1450         unsigned char  new_encoding;
1451         unsigned short new_crctype;
1452
1453         /* return error if TTY interface open */
1454         if (info->port.count)
1455                 return -EBUSY;
1456
1457         DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1458
1459         switch (encoding)
1460         {
1461         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1462         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1463         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1464         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1465         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1466         default: return -EINVAL;
1467         }
1468
1469         switch (parity)
1470         {
1471         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1472         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1473         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1474         default: return -EINVAL;
1475         }
1476
1477         info->params.encoding = new_encoding;
1478         info->params.crc_type = new_crctype;
1479
1480         /* if network interface up, reprogram hardware */
1481         if (info->netcount)
1482                 program_hw(info);
1483
1484         return 0;
1485 }
1486
1487 /**
1488  * called by generic HDLC layer to send frame
1489  *
1490  * skb  socket buffer containing HDLC frame
1491  * dev  pointer to network device structure
1492  */
1493 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1494                                       struct net_device *dev)
1495 {
1496         struct slgt_info *info = dev_to_port(dev);
1497         unsigned long flags;
1498
1499         DBGINFO(("%s hdlc_xmit\n", dev->name));
1500
1501         if (!skb->len)
1502                 return NETDEV_TX_OK;
1503
1504         /* stop sending until this frame completes */
1505         netif_stop_queue(dev);
1506
1507         /* update network statistics */
1508         dev->stats.tx_packets++;
1509         dev->stats.tx_bytes += skb->len;
1510
1511         /* save start time for transmit timeout detection */
1512         dev->trans_start = jiffies;
1513
1514         spin_lock_irqsave(&info->lock, flags);
1515         tx_load(info, skb->data, skb->len);
1516         spin_unlock_irqrestore(&info->lock, flags);
1517
1518         /* done with socket buffer, so free it */
1519         dev_kfree_skb(skb);
1520
1521         return NETDEV_TX_OK;
1522 }
1523
1524 /**
1525  * called by network layer when interface enabled
1526  * claim resources and initialize hardware
1527  *
1528  * dev  pointer to network device structure
1529  *
1530  * returns 0 if success, otherwise error code
1531  */
1532 static int hdlcdev_open(struct net_device *dev)
1533 {
1534         struct slgt_info *info = dev_to_port(dev);
1535         int rc;
1536         unsigned long flags;
1537
1538         if (!try_module_get(THIS_MODULE))
1539                 return -EBUSY;
1540
1541         DBGINFO(("%s hdlcdev_open\n", dev->name));
1542
1543         /* generic HDLC layer open processing */
1544         if ((rc = hdlc_open(dev)))
1545                 return rc;
1546
1547         /* arbitrate between network and tty opens */
1548         spin_lock_irqsave(&info->netlock, flags);
1549         if (info->port.count != 0 || info->netcount != 0) {
1550                 DBGINFO(("%s hdlc_open busy\n", dev->name));
1551                 spin_unlock_irqrestore(&info->netlock, flags);
1552                 return -EBUSY;
1553         }
1554         info->netcount=1;
1555         spin_unlock_irqrestore(&info->netlock, flags);
1556
1557         /* claim resources and init adapter */
1558         if ((rc = startup(info)) != 0) {
1559                 spin_lock_irqsave(&info->netlock, flags);
1560                 info->netcount=0;
1561                 spin_unlock_irqrestore(&info->netlock, flags);
1562                 return rc;
1563         }
1564
1565         /* assert DTR and RTS, apply hardware settings */
1566         info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1567         program_hw(info);
1568
1569         /* enable network layer transmit */
1570         dev->trans_start = jiffies;
1571         netif_start_queue(dev);
1572
1573         /* inform generic HDLC layer of current DCD status */
1574         spin_lock_irqsave(&info->lock, flags);
1575         get_signals(info);
1576         spin_unlock_irqrestore(&info->lock, flags);
1577         if (info->signals & SerialSignal_DCD)
1578                 netif_carrier_on(dev);
1579         else
1580                 netif_carrier_off(dev);
1581         return 0;
1582 }
1583
1584 /**
1585  * called by network layer when interface is disabled
1586  * shutdown hardware and release resources
1587  *
1588  * dev  pointer to network device structure
1589  *
1590  * returns 0 if success, otherwise error code
1591  */
1592 static int hdlcdev_close(struct net_device *dev)
1593 {
1594         struct slgt_info *info = dev_to_port(dev);
1595         unsigned long flags;
1596
1597         DBGINFO(("%s hdlcdev_close\n", dev->name));
1598
1599         netif_stop_queue(dev);
1600
1601         /* shutdown adapter and release resources */
1602         shutdown(info);
1603
1604         hdlc_close(dev);
1605
1606         spin_lock_irqsave(&info->netlock, flags);
1607         info->netcount=0;
1608         spin_unlock_irqrestore(&info->netlock, flags);
1609
1610         module_put(THIS_MODULE);
1611         return 0;
1612 }
1613
1614 /**
1615  * called by network layer to process IOCTL call to network device
1616  *
1617  * dev  pointer to network device structure
1618  * ifr  pointer to network interface request structure
1619  * cmd  IOCTL command code
1620  *
1621  * returns 0 if success, otherwise error code
1622  */
1623 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1624 {
1625         const size_t size = sizeof(sync_serial_settings);
1626         sync_serial_settings new_line;
1627         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1628         struct slgt_info *info = dev_to_port(dev);
1629         unsigned int flags;
1630
1631         DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1632
1633         /* return error if TTY interface open */
1634         if (info->port.count)
1635                 return -EBUSY;
1636
1637         if (cmd != SIOCWANDEV)
1638                 return hdlc_ioctl(dev, ifr, cmd);
1639
1640         memset(&new_line, 0, sizeof(new_line));
1641
1642         switch(ifr->ifr_settings.type) {
1643         case IF_GET_IFACE: /* return current sync_serial_settings */
1644
1645                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1646                 if (ifr->ifr_settings.size < size) {
1647                         ifr->ifr_settings.size = size; /* data size wanted */
1648                         return -ENOBUFS;
1649                 }
1650
1651                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1652                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1653                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1654                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1655
1656                 switch (flags){
1657                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1658                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1659                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1660                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1661                 default: new_line.clock_type = CLOCK_DEFAULT;
1662                 }
1663
1664                 new_line.clock_rate = info->params.clock_speed;
1665                 new_line.loopback   = info->params.loopback ? 1:0;
1666
1667                 if (copy_to_user(line, &new_line, size))
1668                         return -EFAULT;
1669                 return 0;
1670
1671         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1672
1673                 if(!capable(CAP_NET_ADMIN))
1674                         return -EPERM;
1675                 if (copy_from_user(&new_line, line, size))
1676                         return -EFAULT;
1677
1678                 switch (new_line.clock_type)
1679                 {
1680                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1681                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1682                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1683                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1684                 case CLOCK_DEFAULT:  flags = info->params.flags &
1685                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1686                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1687                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1688                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1689                 default: return -EINVAL;
1690                 }
1691
1692                 if (new_line.loopback != 0 && new_line.loopback != 1)
1693                         return -EINVAL;
1694
1695                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1696                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1697                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1698                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1699                 info->params.flags |= flags;
1700
1701                 info->params.loopback = new_line.loopback;
1702
1703                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1704                         info->params.clock_speed = new_line.clock_rate;
1705                 else
1706                         info->params.clock_speed = 0;
1707
1708                 /* if network interface up, reprogram hardware */
1709                 if (info->netcount)
1710                         program_hw(info);
1711                 return 0;
1712
1713         default:
1714                 return hdlc_ioctl(dev, ifr, cmd);
1715         }
1716 }
1717
1718 /**
1719  * called by network layer when transmit timeout is detected
1720  *
1721  * dev  pointer to network device structure
1722  */
1723 static void hdlcdev_tx_timeout(struct net_device *dev)
1724 {
1725         struct slgt_info *info = dev_to_port(dev);
1726         unsigned long flags;
1727
1728         DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1729
1730         dev->stats.tx_errors++;
1731         dev->stats.tx_aborted_errors++;
1732
1733         spin_lock_irqsave(&info->lock,flags);
1734         tx_stop(info);
1735         spin_unlock_irqrestore(&info->lock,flags);
1736
1737         netif_wake_queue(dev);
1738 }
1739
1740 /**
1741  * called by device driver when transmit completes
1742  * reenable network layer transmit if stopped
1743  *
1744  * info  pointer to device instance information
1745  */
1746 static void hdlcdev_tx_done(struct slgt_info *info)
1747 {
1748         if (netif_queue_stopped(info->netdev))
1749                 netif_wake_queue(info->netdev);
1750 }
1751
1752 /**
1753  * called by device driver when frame received
1754  * pass frame to network layer
1755  *
1756  * info  pointer to device instance information
1757  * buf   pointer to buffer contianing frame data
1758  * size  count of data bytes in buf
1759  */
1760 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1761 {
1762         struct sk_buff *skb = dev_alloc_skb(size);
1763         struct net_device *dev = info->netdev;
1764
1765         DBGINFO(("%s hdlcdev_rx\n", dev->name));
1766
1767         if (skb == NULL) {
1768                 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1769                 dev->stats.rx_dropped++;
1770                 return;
1771         }
1772
1773         memcpy(skb_put(skb, size), buf, size);
1774
1775         skb->protocol = hdlc_type_trans(skb, dev);
1776
1777         dev->stats.rx_packets++;
1778         dev->stats.rx_bytes += size;
1779
1780         netif_rx(skb);
1781 }
1782
1783 static const struct net_device_ops hdlcdev_ops = {
1784         .ndo_open       = hdlcdev_open,
1785         .ndo_stop       = hdlcdev_close,
1786         .ndo_change_mtu = hdlc_change_mtu,
1787         .ndo_start_xmit = hdlc_start_xmit,
1788         .ndo_do_ioctl   = hdlcdev_ioctl,
1789         .ndo_tx_timeout = hdlcdev_tx_timeout,
1790 };
1791
1792 /**
1793  * called by device driver when adding device instance
1794  * do generic HDLC initialization
1795  *
1796  * info  pointer to device instance information
1797  *
1798  * returns 0 if success, otherwise error code
1799  */
1800 static int hdlcdev_init(struct slgt_info *info)
1801 {
1802         int rc;
1803         struct net_device *dev;
1804         hdlc_device *hdlc;
1805
1806         /* allocate and initialize network and HDLC layer objects */
1807
1808         if (!(dev = alloc_hdlcdev(info))) {
1809                 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1810                 return -ENOMEM;
1811         }
1812
1813         /* for network layer reporting purposes only */
1814         dev->mem_start = info->phys_reg_addr;
1815         dev->mem_end   = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1816         dev->irq       = info->irq_level;
1817
1818         /* network layer callbacks and settings */
1819         dev->netdev_ops     = &hdlcdev_ops;
1820         dev->watchdog_timeo = 10 * HZ;
1821         dev->tx_queue_len   = 50;
1822
1823         /* generic HDLC layer callbacks and settings */
1824         hdlc         = dev_to_hdlc(dev);
1825         hdlc->attach = hdlcdev_attach;
1826         hdlc->xmit   = hdlcdev_xmit;
1827
1828         /* register objects with HDLC layer */
1829         if ((rc = register_hdlc_device(dev))) {
1830                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1831                 free_netdev(dev);
1832                 return rc;
1833         }
1834
1835         info->netdev = dev;
1836         return 0;
1837 }
1838
1839 /**
1840  * called by device driver when removing device instance
1841  * do generic HDLC cleanup
1842  *
1843  * info  pointer to device instance information
1844  */
1845 static void hdlcdev_exit(struct slgt_info *info)
1846 {
1847         unregister_hdlc_device(info->netdev);
1848         free_netdev(info->netdev);
1849         info->netdev = NULL;
1850 }
1851
1852 #endif /* ifdef CONFIG_HDLC */
1853
1854 /*
1855  * get async data from rx DMA buffers
1856  */
1857 static void rx_async(struct slgt_info *info)
1858 {
1859         struct tty_struct *tty = info->port.tty;
1860         struct mgsl_icount *icount = &info->icount;
1861         unsigned int start, end;
1862         unsigned char *p;
1863         unsigned char status;
1864         struct slgt_desc *bufs = info->rbufs;
1865         int i, count;
1866         int chars = 0;
1867         int stat;
1868         unsigned char ch;
1869
1870         start = end = info->rbuf_current;
1871
1872         while(desc_complete(bufs[end])) {
1873                 count = desc_count(bufs[end]) - info->rbuf_index;
1874                 p     = bufs[end].buf + info->rbuf_index;
1875
1876                 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1877                 DBGDATA(info, p, count, "rx");
1878
1879                 for(i=0 ; i < count; i+=2, p+=2) {
1880                         ch = *p;
1881                         icount->rx++;
1882
1883                         stat = 0;
1884
1885                         if ((status = *(p+1) & (BIT1 + BIT0))) {
1886                                 if (status & BIT1)
1887                                         icount->parity++;
1888                                 else if (status & BIT0)
1889                                         icount->frame++;
1890                                 /* discard char if tty control flags say so */
1891                                 if (status & info->ignore_status_mask)
1892                                         continue;
1893                                 if (status & BIT1)
1894                                         stat = TTY_PARITY;
1895                                 else if (status & BIT0)
1896                                         stat = TTY_FRAME;
1897                         }
1898                         if (tty) {
1899                                 tty_insert_flip_char(tty, ch, stat);
1900                                 chars++;
1901                         }
1902                 }
1903
1904                 if (i < count) {
1905                         /* receive buffer not completed */
1906                         info->rbuf_index += i;
1907                         mod_timer(&info->rx_timer, jiffies + 1);
1908                         break;
1909                 }
1910
1911                 info->rbuf_index = 0;
1912                 free_rbufs(info, end, end);
1913
1914                 if (++end == info->rbuf_count)
1915                         end = 0;
1916
1917                 /* if entire list searched then no frame available */
1918                 if (end == start)
1919                         break;
1920         }
1921
1922         if (tty && chars)
1923                 tty_flip_buffer_push(tty);
1924 }
1925
1926 /*
1927  * return next bottom half action to perform
1928  */
1929 static int bh_action(struct slgt_info *info)
1930 {
1931         unsigned long flags;
1932         int rc;
1933
1934         spin_lock_irqsave(&info->lock,flags);
1935
1936         if (info->pending_bh & BH_RECEIVE) {
1937                 info->pending_bh &= ~BH_RECEIVE;
1938                 rc = BH_RECEIVE;
1939         } else if (info->pending_bh & BH_TRANSMIT) {
1940                 info->pending_bh &= ~BH_TRANSMIT;
1941                 rc = BH_TRANSMIT;
1942         } else if (info->pending_bh & BH_STATUS) {
1943                 info->pending_bh &= ~BH_STATUS;
1944                 rc = BH_STATUS;
1945         } else {
1946                 /* Mark BH routine as complete */
1947                 info->bh_running = false;
1948                 info->bh_requested = false;
1949                 rc = 0;
1950         }
1951
1952         spin_unlock_irqrestore(&info->lock,flags);
1953
1954         return rc;
1955 }
1956
1957 /*
1958  * perform bottom half processing
1959  */
1960 static void bh_handler(struct work_struct *work)
1961 {
1962         struct slgt_info *info = container_of(work, struct slgt_info, task);
1963         int action;
1964
1965         if (!info)
1966                 return;
1967         info->bh_running = true;
1968
1969         while((action = bh_action(info))) {
1970                 switch (action) {
1971                 case BH_RECEIVE:
1972                         DBGBH(("%s bh receive\n", info->device_name));
1973                         switch(info->params.mode) {
1974                         case MGSL_MODE_ASYNC:
1975                                 rx_async(info);
1976                                 break;
1977                         case MGSL_MODE_HDLC:
1978                                 while(rx_get_frame(info));
1979                                 break;
1980                         case MGSL_MODE_RAW:
1981                         case MGSL_MODE_MONOSYNC:
1982                         case MGSL_MODE_BISYNC:
1983                         case MGSL_MODE_XSYNC:
1984                                 while(rx_get_buf(info));
1985                                 break;
1986                         }
1987                         /* restart receiver if rx DMA buffers exhausted */
1988                         if (info->rx_restart)
1989                                 rx_start(info);
1990                         break;
1991                 case BH_TRANSMIT:
1992                         bh_transmit(info);
1993                         break;
1994                 case BH_STATUS:
1995                         DBGBH(("%s bh status\n", info->device_name));
1996                         info->ri_chkcount = 0;
1997                         info->dsr_chkcount = 0;
1998                         info->dcd_chkcount = 0;
1999                         info->cts_chkcount = 0;
2000                         break;
2001                 default:
2002                         DBGBH(("%s unknown action\n", info->device_name));
2003                         break;
2004                 }
2005         }
2006         DBGBH(("%s bh_handler exit\n", info->device_name));
2007 }
2008
2009 static void bh_transmit(struct slgt_info *info)
2010 {
2011         struct tty_struct *tty = info->port.tty;
2012
2013         DBGBH(("%s bh_transmit\n", info->device_name));
2014         if (tty)
2015                 tty_wakeup(tty);
2016 }
2017
2018 static void dsr_change(struct slgt_info *info, unsigned short status)
2019 {
2020         if (status & BIT3) {
2021                 info->signals |= SerialSignal_DSR;
2022                 info->input_signal_events.dsr_up++;
2023         } else {
2024                 info->signals &= ~SerialSignal_DSR;
2025                 info->input_signal_events.dsr_down++;
2026         }
2027         DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2028         if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2029                 slgt_irq_off(info, IRQ_DSR);
2030                 return;
2031         }
2032         info->icount.dsr++;
2033         wake_up_interruptible(&info->status_event_wait_q);
2034         wake_up_interruptible(&info->event_wait_q);
2035         info->pending_bh |= BH_STATUS;
2036 }
2037
2038 static void cts_change(struct slgt_info *info, unsigned short status)
2039 {
2040         if (status & BIT2) {
2041                 info->signals |= SerialSignal_CTS;
2042                 info->input_signal_events.cts_up++;
2043         } else {
2044                 info->signals &= ~SerialSignal_CTS;
2045                 info->input_signal_events.cts_down++;
2046         }
2047         DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2048         if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2049                 slgt_irq_off(info, IRQ_CTS);
2050                 return;
2051         }
2052         info->icount.cts++;
2053         wake_up_interruptible(&info->status_event_wait_q);
2054         wake_up_interruptible(&info->event_wait_q);
2055         info->pending_bh |= BH_STATUS;
2056
2057         if (info->port.flags & ASYNC_CTS_FLOW) {
2058                 if (info->port.tty) {
2059                         if (info->port.tty->hw_stopped) {
2060                                 if (info->signals & SerialSignal_CTS) {
2061                                         info->port.tty->hw_stopped = 0;
2062                                         info->pending_bh |= BH_TRANSMIT;
2063                                         return;
2064                                 }
2065                         } else {
2066                                 if (!(info->signals & SerialSignal_CTS))
2067                                         info->port.tty->hw_stopped = 1;
2068                         }
2069                 }
2070         }
2071 }
2072
2073 static void dcd_change(struct slgt_info *info, unsigned short status)
2074 {
2075         if (status & BIT1) {
2076                 info->signals |= SerialSignal_DCD;
2077                 info->input_signal_events.dcd_up++;
2078         } else {
2079                 info->signals &= ~SerialSignal_DCD;
2080                 info->input_signal_events.dcd_down++;
2081         }
2082         DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2083         if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2084                 slgt_irq_off(info, IRQ_DCD);
2085                 return;
2086         }
2087         info->icount.dcd++;
2088 #if SYNCLINK_GENERIC_HDLC
2089         if (info->netcount) {
2090                 if (info->signals & SerialSignal_DCD)
2091                         netif_carrier_on(info->netdev);
2092                 else
2093                         netif_carrier_off(info->netdev);
2094         }
2095 #endif
2096         wake_up_interruptible(&info->status_event_wait_q);
2097         wake_up_interruptible(&info->event_wait_q);
2098         info->pending_bh |= BH_STATUS;
2099
2100         if (info->port.flags & ASYNC_CHECK_CD) {
2101                 if (info->signals & SerialSignal_DCD)
2102                         wake_up_interruptible(&info->port.open_wait);
2103                 else {
2104                         if (info->port.tty)
2105                                 tty_hangup(info->port.tty);
2106                 }
2107         }
2108 }
2109
2110 static void ri_change(struct slgt_info *info, unsigned short status)
2111 {
2112         if (status & BIT0) {
2113                 info->signals |= SerialSignal_RI;
2114                 info->input_signal_events.ri_up++;
2115         } else {
2116                 info->signals &= ~SerialSignal_RI;
2117                 info->input_signal_events.ri_down++;
2118         }
2119         DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2120         if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2121                 slgt_irq_off(info, IRQ_RI);
2122                 return;
2123         }
2124         info->icount.rng++;
2125         wake_up_interruptible(&info->status_event_wait_q);
2126         wake_up_interruptible(&info->event_wait_q);
2127         info->pending_bh |= BH_STATUS;
2128 }
2129
2130 static void isr_rxdata(struct slgt_info *info)
2131 {
2132         unsigned int count = info->rbuf_fill_count;
2133         unsigned int i = info->rbuf_fill_index;
2134         unsigned short reg;
2135
2136         while (rd_reg16(info, SSR) & IRQ_RXDATA) {
2137                 reg = rd_reg16(info, RDR);
2138                 DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
2139                 if (desc_complete(info->rbufs[i])) {
2140                         /* all buffers full */
2141                         rx_stop(info);
2142                         info->rx_restart = 1;
2143                         continue;
2144                 }
2145                 info->rbufs[i].buf[count++] = (unsigned char)reg;
2146                 /* async mode saves status byte to buffer for each data byte */
2147                 if (info->params.mode == MGSL_MODE_ASYNC)
2148                         info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
2149                 if (count == info->rbuf_fill_level || (reg & BIT10)) {
2150                         /* buffer full or end of frame */
2151                         set_desc_count(info->rbufs[i], count);
2152                         set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
2153                         info->rbuf_fill_count = count = 0;
2154                         if (++i == info->rbuf_count)
2155                                 i = 0;
2156                         info->pending_bh |= BH_RECEIVE;
2157                 }
2158         }
2159
2160         info->rbuf_fill_index = i;
2161         info->rbuf_fill_count = count;
2162 }
2163
2164 static void isr_serial(struct slgt_info *info)
2165 {
2166         unsigned short status = rd_reg16(info, SSR);
2167
2168         DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2169
2170         wr_reg16(info, SSR, status); /* clear pending */
2171
2172         info->irq_occurred = true;
2173
2174         if (info->params.mode == MGSL_MODE_ASYNC) {
2175                 if (status & IRQ_TXIDLE) {
2176                         if (info->tx_active)
2177                                 isr_txeom(info, status);
2178                 }
2179                 if (info->rx_pio && (status & IRQ_RXDATA))
2180                         isr_rxdata(info);
2181                 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2182                         info->icount.brk++;
2183                         /* process break detection if tty control allows */
2184                         if (info->port.tty) {
2185                                 if (!(status & info->ignore_status_mask)) {
2186                                         if (info->read_status_mask & MASK_BREAK) {
2187                                                 tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
2188                                                 if (info->port.flags & ASYNC_SAK)
2189                                                         do_SAK(info->port.tty);
2190                                         }
2191                                 }
2192                         }
2193                 }
2194         } else {
2195                 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2196                         isr_txeom(info, status);
2197                 if (info->rx_pio && (status & IRQ_RXDATA))
2198                         isr_rxdata(info);
2199                 if (status & IRQ_RXIDLE) {
2200                         if (status & RXIDLE)
2201                                 info->icount.rxidle++;
2202                         else
2203                                 info->icount.exithunt++;
2204                         wake_up_interruptible(&info->event_wait_q);
2205                 }
2206
2207                 if (status & IRQ_RXOVER)
2208                         rx_start(info);
2209         }
2210
2211         if (status & IRQ_DSR)
2212                 dsr_change(info, status);
2213         if (status & IRQ_CTS)
2214                 cts_change(info, status);
2215         if (status & IRQ_DCD)
2216                 dcd_change(info, status);
2217         if (status & IRQ_RI)
2218                 ri_change(info, status);
2219 }
2220
2221 static void isr_rdma(struct slgt_info *info)
2222 {
2223         unsigned int status = rd_reg32(info, RDCSR);
2224
2225         DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2226
2227         /* RDCSR (rx DMA control/status)
2228          *
2229          * 31..07  reserved
2230          * 06      save status byte to DMA buffer
2231          * 05      error
2232          * 04      eol (end of list)
2233          * 03      eob (end of buffer)
2234          * 02      IRQ enable
2235          * 01      reset
2236          * 00      enable
2237          */
2238         wr_reg32(info, RDCSR, status);  /* clear pending */
2239
2240         if (status & (BIT5 + BIT4)) {
2241                 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2242                 info->rx_restart = true;
2243         }
2244         info->pending_bh |= BH_RECEIVE;
2245 }
2246
2247 static void isr_tdma(struct slgt_info *info)
2248 {
2249         unsigned int status = rd_reg32(info, TDCSR);
2250
2251         DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2252
2253         /* TDCSR (tx DMA control/status)
2254          *
2255          * 31..06  reserved
2256          * 05      error
2257          * 04      eol (end of list)
2258          * 03      eob (end of buffer)
2259          * 02      IRQ enable
2260          * 01      reset
2261          * 00      enable
2262          */
2263         wr_reg32(info, TDCSR, status);  /* clear pending */
2264
2265         if (status & (BIT5 + BIT4 + BIT3)) {
2266                 // another transmit buffer has completed
2267                 // run bottom half to get more send data from user
2268                 info->pending_bh |= BH_TRANSMIT;
2269         }
2270 }
2271
2272 /*
2273  * return true if there are unsent tx DMA buffers, otherwise false
2274  *
2275  * if there are unsent buffers then info->tbuf_start
2276  * is set to index of first unsent buffer
2277  */
2278 static bool unsent_tbufs(struct slgt_info *info)
2279 {
2280         unsigned int i = info->tbuf_current;
2281         bool rc = false;
2282
2283         /*
2284          * search backwards from last loaded buffer (precedes tbuf_current)
2285          * for first unsent buffer (desc_count > 0)
2286          */
2287
2288         do {
2289                 if (i)
2290                         i--;
2291                 else
2292                         i = info->tbuf_count - 1;
2293                 if (!desc_count(info->tbufs[i]))
2294                         break;
2295                 info->tbuf_start = i;
2296                 rc = true;
2297         } while (i != info->tbuf_current);
2298
2299         return rc;
2300 }
2301
2302 static void isr_txeom(struct slgt_info *info, unsigned short status)
2303 {
2304         DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2305
2306         slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2307         tdma_reset(info);
2308         if (status & IRQ_TXUNDER) {
2309                 unsigned short val = rd_reg16(info, TCR);
2310                 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2311                 wr_reg16(info, TCR, val); /* clear reset bit */
2312         }
2313
2314         if (info->tx_active) {
2315                 if (info->params.mode != MGSL_MODE_ASYNC) {
2316                         if (status & IRQ_TXUNDER)
2317                                 info->icount.txunder++;
2318                         else if (status & IRQ_TXIDLE)
2319                                 info->icount.txok++;
2320                 }
2321
2322                 if (unsent_tbufs(info)) {
2323                         tx_start(info);
2324                         update_tx_timer(info);
2325                         return;
2326                 }
2327                 info->tx_active = false;
2328
2329                 del_timer(&info->tx_timer);
2330
2331                 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2332                         info->signals &= ~SerialSignal_RTS;
2333                         info->drop_rts_on_tx_done = false;
2334                         set_signals(info);
2335                 }
2336
2337 #if SYNCLINK_GENERIC_HDLC
2338                 if (info->netcount)
2339                         hdlcdev_tx_done(info);
2340                 else
2341 #endif
2342                 {
2343                         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2344                                 tx_stop(info);
2345                                 return;
2346                         }
2347                         info->pending_bh |= BH_TRANSMIT;
2348                 }
2349         }
2350 }
2351
2352 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2353 {
2354         struct cond_wait *w, *prev;
2355
2356         /* wake processes waiting for specific transitions */
2357         for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2358                 if (w->data & changed) {
2359                         w->data = state;
2360                         wake_up_interruptible(&w->q);
2361                         if (prev != NULL)
2362                                 prev->next = w->next;
2363                         else
2364                                 info->gpio_wait_q = w->next;
2365                 } else
2366                         prev = w;
2367         }
2368 }
2369
2370 /* interrupt service routine
2371  *
2372  *      irq     interrupt number
2373  *      dev_id  device ID supplied during interrupt registration
2374  */
2375 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2376 {
2377         struct slgt_info *info = dev_id;
2378         unsigned int gsr;
2379         unsigned int i;
2380
2381         DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2382
2383         while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2384                 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2385                 info->irq_occurred = true;
2386                 for(i=0; i < info->port_count ; i++) {
2387                         if (info->port_array[i] == NULL)
2388                                 continue;
2389                         spin_lock(&info->port_array[i]->lock);
2390                         if (gsr & (BIT8 << i))
2391                                 isr_serial(info->port_array[i]);
2392                         if (gsr & (BIT16 << (i*2)))
2393                                 isr_rdma(info->port_array[i]);
2394                         if (gsr & (BIT17 << (i*2)))
2395                                 isr_tdma(info->port_array[i]);
2396                         spin_unlock(&info->port_array[i]->lock);
2397                 }
2398         }
2399
2400         if (info->gpio_present) {
2401                 unsigned int state;
2402                 unsigned int changed;
2403                 spin_lock(&info->lock);
2404                 while ((changed = rd_reg32(info, IOSR)) != 0) {
2405                         DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2406                         /* read latched state of GPIO signals */
2407                         state = rd_reg32(info, IOVR);
2408                         /* clear pending GPIO interrupt bits */
2409                         wr_reg32(info, IOSR, changed);
2410                         for (i=0 ; i < info->port_count ; i++) {
2411                                 if (info->port_array[i] != NULL)
2412                                         isr_gpio(info->port_array[i], changed, state);
2413                         }
2414                 }
2415                 spin_unlock(&info->lock);
2416         }
2417
2418         for(i=0; i < info->port_count ; i++) {
2419                 struct slgt_info *port = info->port_array[i];
2420                 if (port == NULL)
2421                         continue;
2422                 spin_lock(&port->lock);
2423                 if ((port->port.count || port->netcount) &&
2424                     port->pending_bh && !port->bh_running &&
2425                     !port->bh_requested) {
2426                         DBGISR(("%s bh queued\n", port->device_name));
2427                         schedule_work(&port->task);
2428                         port->bh_requested = true;
2429                 }
2430                 spin_unlock(&port->lock);
2431         }
2432
2433         DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2434         return IRQ_HANDLED;
2435 }
2436
2437 static int startup(struct slgt_info *info)
2438 {
2439         DBGINFO(("%s startup\n", info->device_name));
2440
2441         if (info->port.flags & ASYNC_INITIALIZED)
2442                 return 0;
2443
2444         if (!info->tx_buf) {
2445                 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2446                 if (!info->tx_buf) {
2447                         DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2448                         return -ENOMEM;
2449                 }
2450         }
2451
2452         info->pending_bh = 0;
2453
2454         memset(&info->icount, 0, sizeof(info->icount));
2455
2456         /* program hardware for current parameters */
2457         change_params(info);
2458
2459         if (info->port.tty)
2460                 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2461
2462         info->port.flags |= ASYNC_INITIALIZED;
2463
2464         return 0;
2465 }
2466
2467 /*
2468  *  called by close() and hangup() to shutdown hardware
2469  */
2470 static void shutdown(struct slgt_info *info)
2471 {
2472         unsigned long flags;
2473
2474         if (!(info->port.flags & ASYNC_INITIALIZED))
2475                 return;
2476
2477         DBGINFO(("%s shutdown\n", info->device_name));
2478
2479         /* clear status wait queue because status changes */
2480         /* can't happen after shutting down the hardware */
2481         wake_up_interruptible(&info->status_event_wait_q);
2482         wake_up_interruptible(&info->event_wait_q);
2483
2484         del_timer_sync(&info->tx_timer);
2485         del_timer_sync(&info->rx_timer);
2486
2487         kfree(info->tx_buf);
2488         info->tx_buf = NULL;
2489
2490         spin_lock_irqsave(&info->lock,flags);
2491
2492         tx_stop(info);
2493         rx_stop(info);
2494
2495         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2496
2497         if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2498                 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2499                 set_signals(info);
2500         }
2501
2502         flush_cond_wait(&info->gpio_wait_q);
2503
2504         spin_unlock_irqrestore(&info->lock,flags);
2505
2506         if (info->port.tty)
2507                 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2508
2509         info->port.flags &= ~ASYNC_INITIALIZED;
2510 }
2511
2512 static void program_hw(struct slgt_info *info)
2513 {
2514         unsigned long flags;
2515
2516         spin_lock_irqsave(&info->lock,flags);
2517
2518         rx_stop(info);
2519         tx_stop(info);
2520
2521         if (info->params.mode != MGSL_MODE_ASYNC ||
2522             info->netcount)
2523                 sync_mode(info);
2524         else
2525                 async_mode(info);
2526
2527         set_signals(info);
2528
2529         info->dcd_chkcount = 0;
2530         info->cts_chkcount = 0;
2531         info->ri_chkcount = 0;
2532         info->dsr_chkcount = 0;
2533
2534         slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
2535         get_signals(info);
2536
2537         if (info->netcount ||
2538             (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
2539                 rx_start(info);
2540
2541         spin_unlock_irqrestore(&info->lock,flags);
2542 }
2543
2544 /*
2545  * reconfigure adapter based on new parameters
2546  */
2547 static void change_params(struct slgt_info *info)
2548 {
2549         unsigned cflag;
2550         int bits_per_char;
2551
2552         if (!info->port.tty || !info->port.tty->termios)
2553                 return;
2554         DBGINFO(("%s change_params\n", info->device_name));
2555
2556         cflag = info->port.tty->termios->c_cflag;
2557
2558         /* if B0 rate (hangup) specified then negate DTR and RTS */
2559         /* otherwise assert DTR and RTS */
2560         if (cflag & CBAUD)
2561                 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2562         else
2563                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2564
2565         /* byte size and parity */
2566
2567         switch (cflag & CSIZE) {
2568         case CS5: info->params.data_bits = 5; break;
2569         case CS6: info->params.data_bits = 6; break;
2570         case CS7: info->params.data_bits = 7; break;
2571         case CS8: info->params.data_bits = 8; break;
2572         default:  info->params.data_bits = 7; break;
2573         }
2574
2575         info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2576
2577         if (cflag & PARENB)
2578                 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2579         else
2580                 info->params.parity = ASYNC_PARITY_NONE;
2581
2582         /* calculate number of jiffies to transmit a full
2583          * FIFO (32 bytes) at specified data rate
2584          */
2585         bits_per_char = info->params.data_bits +
2586                         info->params.stop_bits + 1;
2587
2588         info->params.data_rate = tty_get_baud_rate(info->port.tty);
2589
2590         if (info->params.data_rate) {
2591                 info->timeout = (32*HZ*bits_per_char) /
2592                                 info->params.data_rate;
2593         }
2594         info->timeout += HZ/50;         /* Add .02 seconds of slop */
2595
2596         if (cflag & CRTSCTS)
2597                 info->port.flags |= ASYNC_CTS_FLOW;
2598         else
2599                 info->port.flags &= ~ASYNC_CTS_FLOW;
2600
2601         if (cflag & CLOCAL)
2602                 info->port.flags &= ~ASYNC_CHECK_CD;
2603         else
2604                 info->port.flags |= ASYNC_CHECK_CD;
2605
2606         /* process tty input control flags */
2607
2608         info->read_status_mask = IRQ_RXOVER;
2609         if (I_INPCK(info->port.tty))
2610                 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2611         if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2612                 info->read_status_mask |= MASK_BREAK;
2613         if (I_IGNPAR(info->port.tty))
2614                 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2615         if (I_IGNBRK(info->port.tty)) {
2616                 info->ignore_status_mask |= MASK_BREAK;
2617                 /* If ignoring parity and break indicators, ignore
2618                  * overruns too.  (For real raw support).
2619                  */
2620                 if (I_IGNPAR(info->port.tty))
2621                         info->ignore_status_mask |= MASK_OVERRUN;
2622         }
2623
2624         program_hw(info);
2625 }
2626
2627 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2628 {
2629         DBGINFO(("%s get_stats\n",  info->device_name));
2630         if (!user_icount) {
2631                 memset(&info->icount, 0, sizeof(info->icount));
2632         } else {
2633                 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2634                         return -EFAULT;
2635         }
2636         return 0;
2637 }
2638
2639 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2640 {
2641         DBGINFO(("%s get_params\n", info->device_name));
2642         if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2643                 return -EFAULT;
2644         return 0;
2645 }
2646
2647 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2648 {
2649         unsigned long flags;
2650         MGSL_PARAMS tmp_params;
2651
2652         DBGINFO(("%s set_params\n", info->device_name));
2653         if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2654                 return -EFAULT;
2655
2656         spin_lock_irqsave(&info->lock, flags);
2657         if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
2658                 info->base_clock = tmp_params.clock_speed;
2659         else
2660                 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2661         spin_unlock_irqrestore(&info->lock, flags);
2662
2663         program_hw(info);
2664
2665         return 0;
2666 }
2667
2668 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2669 {
2670         DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2671         if (put_user(info->idle_mode, idle_mode))
2672                 return -EFAULT;
2673         return 0;
2674 }
2675
2676 static int set_txidle(struct slgt_info *info, int idle_mode)
2677 {
2678         unsigned long flags;
2679         DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2680         spin_lock_irqsave(&info->lock,flags);
2681         info->idle_mode = idle_mode;
2682         if (info->params.mode != MGSL_MODE_ASYNC)
2683                 tx_set_idle(info);
2684         spin_unlock_irqrestore(&info->lock,flags);
2685         return 0;
2686 }
2687
2688 static int tx_enable(struct slgt_info *info, int enable)
2689 {
2690         unsigned long flags;
2691         DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2692         spin_lock_irqsave(&info->lock,flags);
2693         if (enable) {
2694                 if (!info->tx_enabled)
2695                         tx_start(info);
2696         } else {
2697                 if (info->tx_enabled)
2698                         tx_stop(info);
2699         }
2700         spin_unlock_irqrestore(&info->lock,flags);
2701         return 0;
2702 }
2703
2704 /*
2705  * abort transmit HDLC frame
2706  */
2707 static int tx_abort(struct slgt_info *info)
2708 {
2709         unsigned long flags;
2710         DBGINFO(("%s tx_abort\n", info->device_name));
2711         spin_lock_irqsave(&info->lock,flags);
2712         tdma_reset(info);
2713         spin_unlock_irqrestore(&info->lock,flags);
2714         return 0;
2715 }
2716
2717 static int rx_enable(struct slgt_info *info, int enable)
2718 {
2719         unsigned long flags;
2720         unsigned int rbuf_fill_level;
2721         DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
2722         spin_lock_irqsave(&info->lock,flags);
2723         /*
2724          * enable[31..16] = receive DMA buffer fill level
2725          * 0 = noop (leave fill level unchanged)
2726          * fill level must be multiple of 4 and <= buffer size
2727          */
2728         rbuf_fill_level = ((unsigned int)enable) >> 16;
2729         if (rbuf_fill_level) {
2730                 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
2731                         spin_unlock_irqrestore(&info->lock, flags);
2732                         return -EINVAL;
2733                 }
2734                 info->rbuf_fill_level = rbuf_fill_level;
2735                 if (rbuf_fill_level < 128)
2736                         info->rx_pio = 1; /* PIO mode */
2737                 else
2738                         info->rx_pio = 0; /* DMA mode */
2739                 rx_stop(info); /* restart receiver to use new fill level */
2740         }
2741
2742         /*
2743          * enable[1..0] = receiver enable command
2744          * 0 = disable
2745          * 1 = enable
2746          * 2 = enable or force hunt mode if already enabled
2747          */
2748         enable &= 3;
2749         if (enable) {
2750                 if (!info->rx_enabled)
2751                         rx_start(info);
2752                 else if (enable == 2) {
2753                         /* force hunt mode (write 1 to RCR[3]) */
2754                         wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2755                 }
2756         } else {
2757                 if (info->rx_enabled)
2758                         rx_stop(info);
2759         }
2760         spin_unlock_irqrestore(&info->lock,flags);
2761         return 0;
2762 }
2763
2764 /*
2765  *  wait for specified event to occur
2766  */
2767 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2768 {
2769         unsigned long flags;
2770         int s;
2771         int rc=0;
2772         struct mgsl_icount cprev, cnow;
2773         int events;
2774         int mask;
2775         struct  _input_signal_events oldsigs, newsigs;
2776         DECLARE_WAITQUEUE(wait, current);
2777
2778         if (get_user(mask, mask_ptr))
2779                 return -EFAULT;
2780
2781         DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2782
2783         spin_lock_irqsave(&info->lock,flags);
2784
2785         /* return immediately if state matches requested events */
2786         get_signals(info);
2787         s = info->signals;
2788
2789         events = mask &
2790                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2791                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2792                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2793                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2794         if (events) {
2795                 spin_unlock_irqrestore(&info->lock,flags);
2796                 goto exit;
2797         }
2798
2799         /* save current irq counts */
2800         cprev = info->icount;
2801         oldsigs = info->input_signal_events;
2802
2803         /* enable hunt and idle irqs if needed */
2804         if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2805                 unsigned short val = rd_reg16(info, SCR);
2806                 if (!(val & IRQ_RXIDLE))
2807                         wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2808         }
2809
2810         set_current_state(TASK_INTERRUPTIBLE);
2811         add_wait_queue(&info->event_wait_q, &wait);
2812
2813         spin_unlock_irqrestore(&info->lock,flags);
2814
2815         for(;;) {
2816                 schedule();
2817                 if (signal_pending(current)) {
2818                         rc = -ERESTARTSYS;
2819                         break;
2820                 }
2821
2822                 /* get current irq counts */
2823                 spin_lock_irqsave(&info->lock,flags);
2824                 cnow = info->icount;
2825                 newsigs = info->input_signal_events;
2826                 set_current_state(TASK_INTERRUPTIBLE);
2827                 spin_unlock_irqrestore(&info->lock,flags);
2828
2829                 /* if no change, wait aborted for some reason */
2830                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
2831                     newsigs.dsr_down == oldsigs.dsr_down &&
2832                     newsigs.dcd_up   == oldsigs.dcd_up   &&
2833                     newsigs.dcd_down == oldsigs.dcd_down &&
2834                     newsigs.cts_up   == oldsigs.cts_up   &&
2835                     newsigs.cts_down == oldsigs.cts_down &&
2836                     newsigs.ri_up    == oldsigs.ri_up    &&
2837                     newsigs.ri_down  == oldsigs.ri_down  &&
2838                     cnow.exithunt    == cprev.exithunt   &&
2839                     cnow.rxidle      == cprev.rxidle) {
2840                         rc = -EIO;
2841                         break;
2842                 }
2843
2844                 events = mask &
2845                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
2846                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2847                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
2848                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2849                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
2850                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2851                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
2852                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
2853                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
2854                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
2855                 if (events)
2856                         break;
2857
2858                 cprev = cnow;
2859                 oldsigs = newsigs;
2860         }
2861
2862         remove_wait_queue(&info->event_wait_q, &wait);
2863         set_current_state(TASK_RUNNING);
2864
2865
2866         if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2867                 spin_lock_irqsave(&info->lock,flags);
2868                 if (!waitqueue_active(&info->event_wait_q)) {
2869                         /* disable enable exit hunt mode/idle rcvd IRQs */
2870                         wr_reg16(info, SCR,
2871                                 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2872                 }
2873                 spin_unlock_irqrestore(&info->lock,flags);
2874         }
2875 exit:
2876         if (rc == 0)
2877                 rc = put_user(events, mask_ptr);
2878         return rc;
2879 }
2880
2881 static int get_interface(struct slgt_info *info, int __user *if_mode)
2882 {
2883         DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2884         if (put_user(info->if_mode, if_mode))
2885                 return -EFAULT;
2886         return 0;
2887 }
2888
2889 static int set_interface(struct slgt_info *info, int if_mode)
2890 {
2891         unsigned long flags;
2892         unsigned short val;
2893
2894         DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2895         spin_lock_irqsave(&info->lock,flags);
2896         info->if_mode = if_mode;
2897
2898         msc_set_vcr(info);
2899
2900         /* TCR (tx control) 07  1=RTS driver control */
2901         val = rd_reg16(info, TCR);
2902         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2903                 val |= BIT7;
2904         else
2905                 val &= ~BIT7;
2906         wr_reg16(info, TCR, val);
2907
2908         spin_unlock_irqrestore(&info->lock,flags);
2909         return 0;
2910 }
2911
2912 static int get_xsync(struct slgt_info *info, int __user *xsync)
2913 {
2914         DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync));
2915         if (put_user(info->xsync, xsync))
2916                 return -EFAULT;
2917         return 0;
2918 }
2919
2920 /*
2921  * set extended sync pattern (1 to 4 bytes) for extended sync mode
2922  *
2923  * sync pattern is contained in least significant bytes of value
2924  * most significant byte of sync pattern is oldest (1st sent/detected)
2925  */
2926 static int set_xsync(struct slgt_info *info, int xsync)
2927 {
2928         unsigned long flags;
2929
2930         DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync));
2931         spin_lock_irqsave(&info->lock, flags);
2932         info->xsync = xsync;
2933         wr_reg32(info, XSR, xsync);
2934         spin_unlock_irqrestore(&info->lock, flags);
2935         return 0;
2936 }
2937
2938 static int get_xctrl(struct slgt_info *info, int __user *xctrl)
2939 {
2940         DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl));
2941         if (put_user(info->xctrl, xctrl))
2942                 return -EFAULT;
2943         return 0;
2944 }
2945
2946 /*
2947  * set extended control options
2948  *
2949  * xctrl[31:19] reserved, must be zero
2950  * xctrl[18:17] extended sync pattern length in bytes
2951  *              00 = 1 byte  in xsr[7:0]
2952  *              01 = 2 bytes in xsr[15:0]
2953  *              10 = 3 bytes in xsr[23:0]
2954  *              11 = 4 bytes in xsr[31:0]
2955  * xctrl[16]    1 = enable terminal count, 0=disabled
2956  * xctrl[15:0]  receive terminal count for fixed length packets
2957  *              value is count minus one (0 = 1 byte packet)
2958  *              when terminal count is reached, receiver
2959  *              automatically returns to hunt mode and receive
2960  *              FIFO contents are flushed to DMA buffers with
2961  *              end of frame (EOF) status
2962  */
2963 static int set_xctrl(struct slgt_info *info, int xctrl)
2964 {
2965         unsigned long flags;
2966
2967         DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl));
2968         spin_lock_irqsave(&info->lock, flags);
2969         info->xctrl = xctrl;
2970         wr_reg32(info, XCR, xctrl);
2971         spin_unlock_irqrestore(&info->lock, flags);
2972         return 0;
2973 }
2974
2975 /*
2976  * set general purpose IO pin state and direction
2977  *
2978  * user_gpio fields:
2979  * state   each bit indicates a pin state
2980  * smask   set bit indicates pin state to set
2981  * dir     each bit indicates a pin direction (0=input, 1=output)
2982  * dmask   set bit indicates pin direction to set
2983  */
2984 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2985 {
2986         unsigned long flags;
2987         struct gpio_desc gpio;
2988         __u32 data;
2989
2990         if (!info->gpio_present)
2991                 return -EINVAL;
2992         if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2993                 return -EFAULT;
2994         DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2995                  info->device_name, gpio.state, gpio.smask,
2996                  gpio.dir, gpio.dmask));
2997
2998         spin_lock_irqsave(&info->port_array[0]->lock, flags);
2999         if (gpio.dmask) {
3000                 data = rd_reg32(info, IODR);
3001                 data |= gpio.dmask & gpio.dir;
3002                 data &= ~(gpio.dmask & ~gpio.dir);
3003                 wr_reg32(info, IODR, data);
3004         }
3005         if (gpio.smask) {
3006                 data = rd_reg32(info, IOVR);
3007                 data |= gpio.smask & gpio.state;
3008                 data &= ~(gpio.smask & ~gpio.state);
3009                 wr_reg32(info, IOVR, data);
3010         }
3011         spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3012
3013         return 0;
3014 }
3015
3016 /*
3017  * get general purpose IO pin state and direction
3018  */
3019 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
3020 {
3021         struct gpio_desc gpio;
3022         if (!info->gpio_present)
3023                 return -EINVAL;
3024         gpio.state = rd_reg32(info, IOVR);
3025         gpio.smask = 0xffffffff;
3026         gpio.dir   = rd_reg32(info, IODR);
3027         gpio.dmask = 0xffffffff;
3028         if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
3029                 return -EFAULT;
3030         DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
3031                  info->device_name, gpio.state, gpio.dir));
3032         return 0;
3033 }
3034
3035 /*
3036  * conditional wait facility
3037  */
3038 static void init_cond_wait(struct cond_wait *w, unsigned int data)
3039 {
3040         init_waitqueue_head(&w->q);
3041         init_waitqueue_entry(&w->wait, current);
3042         w->data = data;
3043 }
3044
3045 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
3046 {
3047         set_current_state(TASK_INTERRUPTIBLE);
3048         add_wait_queue(&w->q, &w->wait);
3049         w->next = *head;
3050         *head = w;
3051 }
3052
3053 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
3054 {
3055         struct cond_wait *w, *prev;
3056         remove_wait_queue(&cw->q, &cw->wait);
3057         set_current_state(TASK_RUNNING);
3058         for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
3059                 if (w == cw) {
3060                         if (prev != NULL)
3061                                 prev->next = w->next;
3062                         else
3063                                 *head = w->next;
3064                         break;
3065                 }
3066         }
3067 }
3068
3069 static void flush_cond_wait(struct cond_wait **head)
3070 {
3071         while (*head != NULL) {
3072                 wake_up_interruptible(&(*head)->q);
3073                 *head = (*head)->next;
3074         }
3075 }
3076
3077 /*
3078  * wait for general purpose I/O pin(s) to enter specified state
3079  *
3080  * user_gpio fields:
3081  * state - bit indicates target pin state
3082  * smask - set bit indicates watched pin
3083  *
3084  * The wait ends when at least one watched pin enters the specified
3085  * state. When 0 (no error) is returned, user_gpio->state is set to the
3086  * state of all GPIO pins when the wait ends.
3087  *
3088  * Note: Each pin may be a dedicated input, dedicated output, or
3089  * configurable input/output. The number and configuration of pins
3090  * varies with the specific adapter model. Only input pins (dedicated
3091  * or configured) can be monitored with this function.
3092  */
3093 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
3094 {
3095         unsigned long flags;
3096         int rc = 0;
3097         struct gpio_desc gpio;
3098         struct cond_wait wait;
3099         u32 state;
3100
3101         if (!info->gpio_present)
3102                 return -EINVAL;
3103         if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
3104                 return -EFAULT;
3105         DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
3106                  info->device_name, gpio.state, gpio.smask));
3107         /* ignore output pins identified by set IODR bit */
3108         if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
3109                 return -EINVAL;
3110         init_cond_wait(&wait, gpio.smask);
3111
3112         spin_lock_irqsave(&info->port_array[0]->lock, flags);
3113         /* enable interrupts for watched pins */
3114         wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
3115         /* get current pin states */
3116         state = rd_reg32(info, IOVR);
3117
3118         if (gpio.smask & ~(state ^ gpio.state)) {
3119                 /* already in target state */
3120                 gpio.state = state;
3121         } else {
3122                 /* wait for target state */
3123                 add_cond_wait(&info->gpio_wait_q, &wait);
3124                 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3125                 schedule();
3126                 if (signal_pending(current))
3127                         rc = -ERESTARTSYS;
3128                 else
3129                         gpio.state = wait.data;
3130                 spin_lock_irqsave(&info->port_array[0]->lock, flags);
3131                 remove_cond_wait(&info->gpio_wait_q, &wait);
3132         }
3133
3134         /* disable all GPIO interrupts if no waiting processes */
3135         if (info->gpio_wait_q == NULL)
3136                 wr_reg32(info, IOER, 0);
3137         spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3138
3139         if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
3140                 rc = -EFAULT;
3141         return rc;
3142 }
3143
3144 static int modem_input_wait(struct slgt_info *info,int arg)
3145 {
3146         unsigned long flags;
3147         int rc;
3148         struct mgsl_icount cprev, cnow;
3149         DECLARE_WAITQUEUE(wait, current);
3150
3151         /* save current irq counts */
3152         spin_lock_irqsave(&info->lock,flags);
3153         cprev = info->icount;
3154         add_wait_queue(&info->status_event_wait_q, &wait);
3155         set_current_state(TASK_INTERRUPTIBLE);
3156         spin_unlock_irqrestore(&info->lock,flags);
3157
3158         for(;;) {
3159                 schedule();
3160                 if (signal_pending(current)) {
3161                         rc = -ERESTARTSYS;
3162                         break;
3163                 }
3164
3165                 /* get new irq counts */
3166                 spin_lock_irqsave(&info->lock,flags);
3167                 cnow = info->icount;
3168                 set_current_state(TASK_INTERRUPTIBLE);
3169                 spin_unlock_irqrestore(&info->lock,flags);
3170
3171                 /* if no change, wait aborted for some reason */
3172                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3173                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3174                         rc = -EIO;
3175                         break;
3176                 }
3177
3178                 /* check for change in caller specified modem input */
3179                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3180                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3181                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3182                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3183                         rc = 0;
3184                         break;
3185                 }
3186
3187                 cprev = cnow;
3188         }
3189         remove_wait_queue(&info->status_event_wait_q, &wait);
3190         set_current_state(TASK_RUNNING);
3191         return rc;
3192 }
3193
3194 /*
3195  *  return state of serial control and status signals
3196  */
3197 static int tiocmget(struct tty_struct *tty)
3198 {
3199         struct slgt_info *info = tty->driver_data;
3200         unsigned int result;
3201         unsigned long flags;
3202
3203         spin_lock_irqsave(&info->lock,flags);
3204         get_signals(info);
3205         spin_unlock_irqrestore(&info->lock,flags);
3206
3207         result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3208                 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3209                 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3210                 ((info->signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
3211                 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3212                 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3213
3214         DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3215         return result;
3216 }
3217
3218 /*
3219  * set modem control signals (DTR/RTS)
3220  *
3221  *      cmd     signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3222  *              TIOCMSET = set/clear signal values
3223  *      value   bit mask for command
3224  */
3225 static int tiocmset(struct tty_struct *tty,
3226                     unsigned int set, unsigned int clear)
3227 {
3228         struct slgt_info *info = tty->driver_data;
3229         unsigned long flags;
3230
3231         DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3232
3233         if (set & TIOCM_RTS)
3234                 info->signals |= SerialSignal_RTS;
3235         if (set & TIOCM_DTR)
3236                 info->signals |= SerialSignal_DTR;
3237         if (clear & TIOCM_RTS)
3238                 info->signals &= ~SerialSignal_RTS;
3239         if (clear & TIOCM_DTR)
3240                 info->signals &= ~SerialSignal_DTR;
3241
3242         spin_lock_irqsave(&info->lock,flags);
3243         set_signals(info);
3244         spin_unlock_irqrestore(&info->lock,flags);
3245         return 0;
3246 }
3247
3248 static int carrier_raised(struct tty_port *port)
3249 {
3250         unsigned long flags;
3251         struct slgt_info *info = container_of(port, struct slgt_info, port);
3252
3253         spin_lock_irqsave(&info->lock,flags);
3254         get_signals(info);
3255         spin_unlock_irqrestore(&info->lock,flags);
3256         return (info->signals & SerialSignal_DCD) ? 1 : 0;
3257 }
3258
3259 static void dtr_rts(struct tty_port *port, int on)
3260 {
3261         unsigned long flags;
3262         struct slgt_info *info = container_of(port, struct slgt_info, port);
3263
3264         spin_lock_irqsave(&info->lock,flags);
3265         if (on)
3266                 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3267         else
3268                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3269         set_signals(info);
3270         spin_unlock_irqrestore(&info->lock,flags);
3271 }
3272
3273
3274 /*
3275  *  block current process until the device is ready to open
3276  */
3277 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3278                            struct slgt_info *info)
3279 {
3280         DECLARE_WAITQUEUE(wait, current);
3281         int             retval;
3282         bool            do_clocal = false;
3283         bool            extra_count = false;
3284         unsigned long   flags;
3285         int             cd;
3286         struct tty_port *port = &info->port;
3287
3288         DBGINFO(("%s block_til_ready\n", tty->driver->name));
3289
3290         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3291                 /* nonblock mode is set or port is not enabled */
3292                 port->flags |= ASYNC_NORMAL_ACTIVE;
3293                 return 0;
3294         }
3295
3296         if (tty->termios->c_cflag & CLOCAL)
3297                 do_clocal = true;
3298
3299         /* Wait for carrier detect and the line to become
3300          * free (i.e., not in use by the callout).  While we are in
3301          * this loop, port->count is dropped by one, so that
3302          * close() knows when to free things.  We restore it upon
3303          * exit, either normal or abnormal.
3304          */
3305
3306         retval = 0;
3307         add_wait_queue(&port->open_wait, &wait);
3308
3309         spin_lock_irqsave(&info->lock, flags);
3310         if (!tty_hung_up_p(filp)) {
3311                 extra_count = true;
3312                 port->count--;
3313         }
3314         spin_unlock_irqrestore(&info->lock, flags);
3315         port->blocked_open++;
3316
3317         while (1) {
3318                 if ((tty->termios->c_cflag & CBAUD))
3319                         tty_port_raise_dtr_rts(port);
3320
3321                 set_current_state(TASK_INTERRUPTIBLE);
3322
3323                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3324                         retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3325                                         -EAGAIN : -ERESTARTSYS;
3326                         break;
3327                 }
3328
3329                 cd = tty_port_carrier_raised(port);
3330
3331                 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
3332                         break;
3333
3334                 if (signal_pending(current)) {
3335                         retval = -ERESTARTSYS;
3336                         break;
3337                 }
3338
3339                 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3340                 tty_unlock();
3341                 schedule();
3342                 tty_lock();
3343         }
3344
3345         set_current_state(TASK_RUNNING);
3346         remove_wait_queue(&port->open_wait, &wait);
3347
3348         if (extra_count)
3349                 port->count++;
3350         port->blocked_open--;
3351
3352         if (!retval)
3353                 port->flags |= ASYNC_NORMAL_ACTIVE;
3354
3355         DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3356         return retval;
3357 }
3358
3359 static int alloc_tmp_rbuf(struct slgt_info *info)
3360 {
3361         info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3362         if (info->tmp_rbuf == NULL)
3363                 return -ENOMEM;
3364         return 0;
3365 }
3366
3367 static void free_tmp_rbuf(struct slgt_info *info)
3368 {
3369         kfree(info->tmp_rbuf);
3370         info->tmp_rbuf = NULL;
3371 }
3372
3373 /*
3374  * allocate DMA descriptor lists.
3375  */
3376 static int alloc_desc(struct slgt_info *info)
3377 {
3378         unsigned int i;
3379         unsigned int pbufs;
3380
3381         /* allocate memory to hold descriptor lists */
3382         info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3383         if (info->bufs == NULL)
3384                 return -ENOMEM;
3385
3386         memset(info->bufs, 0, DESC_LIST_SIZE);
3387
3388         info->rbufs = (struct slgt_desc*)info->bufs;
3389         info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3390
3391         pbufs = (unsigned int)info->bufs_dma_addr;
3392
3393         /*
3394          * Build circular lists of descriptors
3395          */
3396
3397         for (i=0; i < info->rbuf_count; i++) {
3398                 /* physical address of this descriptor */
3399                 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3400
3401                 /* physical address of next descriptor */
3402                 if (i == info->rbuf_count - 1)
3403                         info->rbufs[i].next = cpu_to_le32(pbufs);
3404                 else
3405                         info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3406                 set_desc_count(info->rbufs[i], DMABUFSIZE);
3407         }
3408
3409         for (i=0; i < info->tbuf_count; i++) {
3410                 /* physical address of this descriptor */
3411                 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3412
3413                 /* physical address of next descriptor */
3414                 if (i == info->tbuf_count - 1)
3415                         info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3416                 else
3417                         info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3418         }
3419
3420         return 0;
3421 }
3422
3423 static void free_desc(struct slgt_info *info)
3424 {
3425         if (info->bufs != NULL) {
3426                 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3427                 info->bufs  = NULL;
3428                 info->rbufs = NULL;
3429                 info->tbufs = NULL;
3430         }
3431 }
3432
3433 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3434 {
3435         int i;
3436         for (i=0; i < count; i++) {
3437                 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3438                         return -ENOMEM;
3439                 bufs[i].pbuf  = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3440         }
3441         return 0;
3442 }
3443
3444 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3445 {
3446         int i;
3447         for (i=0; i < count; i++) {
3448                 if (bufs[i].buf == NULL)
3449                         continue;
3450                 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3451                 bufs[i].buf = NULL;
3452         }
3453 }
3454
3455 static int alloc_dma_bufs(struct slgt_info *info)
3456 {
3457         info->rbuf_count = 32;
3458         info->tbuf_count = 32;
3459
3460         if (alloc_desc(info) < 0 ||
3461             alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3462             alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3463             alloc_tmp_rbuf(info) < 0) {
3464                 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3465                 return -ENOMEM;
3466         }
3467         reset_rbufs(info);
3468         return 0;
3469 }
3470
3471 static void free_dma_bufs(struct slgt_info *info)
3472 {
3473         if (info->bufs) {
3474                 free_bufs(info, info->rbufs, info->rbuf_count);
3475                 free_bufs(info, info->tbufs, info->tbuf_count);
3476                 free_desc(info);
3477         }
3478         free_tmp_rbuf(info);
3479 }
3480
3481 static int claim_resources(struct slgt_info *info)
3482 {
3483         if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3484                 DBGERR(("%s reg addr conflict, addr=%08X\n",
3485                         info->device_name, info->phys_reg_addr));
3486                 info->init_error = DiagStatus_AddressConflict;
3487                 goto errout;
3488         }
3489         else
3490                 info->reg_addr_requested = true;
3491
3492         info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
3493         if (!info->reg_addr) {
3494                 DBGERR(("%s can't map device registers, addr=%08X\n",
3495                         info->device_name, info->phys_reg_addr));
3496                 info->init_error = DiagStatus_CantAssignPciResources;
3497                 goto errout;
3498         }
3499         return 0;
3500
3501 errout:
3502         release_resources(info);
3503         return -ENODEV;
3504 }
3505
3506 static void release_resources(struct slgt_info *info)
3507 {
3508         if (info->irq_requested) {
3509                 free_irq(info->irq_level, info);
3510                 info->irq_requested = false;
3511         }
3512
3513         if (info->reg_addr_requested) {
3514                 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3515                 info->reg_addr_requested = false;
3516         }
3517
3518         if (info->reg_addr) {
3519                 iounmap(info->reg_addr);
3520                 info->reg_addr = NULL;
3521         }
3522 }
3523
3524 /* Add the specified device instance data structure to the
3525  * global linked list of devices and increment the device count.
3526  */
3527 static void add_device(struct slgt_info *info)
3528 {
3529         char *devstr;
3530
3531         info->next_device = NULL;
3532         info->line = slgt_device_count;
3533         sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3534
3535         if (info->line < MAX_DEVICES) {
3536                 if (maxframe[info->line])
3537                         info->max_frame_size = maxframe[info->line];
3538         }
3539
3540         slgt_device_count++;
3541
3542         if (!slgt_device_list)
3543                 slgt_device_list = info;
3544         else {
3545                 struct slgt_info *current_dev = slgt_device_list;
3546                 while(current_dev->next_device)
3547                         current_dev = current_dev->next_device;
3548                 current_dev->next_device = info;
3549         }
3550
3551         if (info->max_frame_size < 4096)
3552                 info->max_frame_size = 4096;
3553         else if (info->max_frame_size > 65535)
3554                 info->max_frame_size = 65535;
3555
3556         switch(info->pdev->device) {
3557         case SYNCLINK_GT_DEVICE_ID:
3558                 devstr = "GT";
3559                 break;
3560         case SYNCLINK_GT2_DEVICE_ID:
3561                 devstr = "GT2";
3562                 break;
3563         case SYNCLINK_GT4_DEVICE_ID:
3564                 devstr = "GT4";
3565                 break;
3566         case SYNCLINK_AC_DEVICE_ID:
3567                 devstr = "AC";
3568                 info->params.mode = MGSL_MODE_ASYNC;
3569                 break;
3570         default:
3571                 devstr = "(unknown model)";
3572         }
3573         printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3574                 devstr, info->device_name, info->phys_reg_addr,
3575                 info->irq_level, info->max_frame_size);
3576
3577 #if SYNCLINK_GENERIC_HDLC
3578         hdlcdev_init(info);
3579 #endif
3580 }
3581
3582 static const struct tty_port_operations slgt_port_ops = {
3583         .carrier_raised = carrier_raised,
3584         .dtr_rts = dtr_rts,
3585 };
3586
3587 /*
3588  *  allocate device instance structure, return NULL on failure
3589  */
3590 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3591 {
3592         struct slgt_info *info;
3593
3594         info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3595
3596         if (!info) {
3597                 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3598                         driver_name, adapter_num, port_num));
3599         } else {
3600                 tty_port_init(&info->port);
3601                 info->port.ops = &slgt_port_ops;
3602                 info->magic = MGSL_MAGIC;
3603                 INIT_WORK(&info->task, bh_handler);
3604                 info->max_frame_size = 4096;
3605                 info->base_clock = 14745600;
3606                 info->rbuf_fill_level = DMABUFSIZE;
3607                 info->port.close_delay = 5*HZ/10;
3608                 info->port.closing_wait = 30*HZ;
3609                 init_waitqueue_head(&info->status_event_wait_q);
3610                 init_waitqueue_head(&info->event_wait_q);
3611                 spin_lock_init(&info->netlock);
3612                 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3613                 info->idle_mode = HDLC_TXIDLE_FLAGS;
3614                 info->adapter_num = adapter_num;
3615                 info->port_num = port_num;
3616
3617                 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3618                 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3619
3620                 /* Copy configuration info to device instance data */
3621                 info->pdev = pdev;
3622                 info->irq_level = pdev->irq;
3623                 info->phys_reg_addr = pci_resource_start(pdev,0);
3624
3625                 info->bus_type = MGSL_BUS_TYPE_PCI;
3626                 info->irq_flags = IRQF_SHARED;
3627
3628                 info->init_error = -1; /* assume error, set to 0 on successful init */
3629         }
3630
3631         return info;
3632 }
3633
3634 static void device_init(int adapter_num, struct pci_dev *pdev)
3635 {
3636         struct slgt_info *port_array[SLGT_MAX_PORTS];
3637         int i;
3638         int port_count = 1;
3639
3640         if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3641                 port_count = 2;
3642         else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3643                 port_count = 4;
3644
3645         /* allocate device instances for all ports */
3646         for (i=0; i < port_count; ++i) {
3647                 port_array[i] = alloc_dev(adapter_num, i, pdev);
3648                 if (port_array[i] == NULL) {
3649                         for (--i; i >= 0; --i)
3650                                 kfree(port_array[i]);
3651                         return;
3652                 }
3653         }
3654
3655         /* give copy of port_array to all ports and add to device list  */
3656         for (i=0; i < port_count; ++i) {
3657                 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3658                 add_device(port_array[i]);
3659                 port_array[i]->port_count = port_count;
3660                 spin_lock_init(&port_array[i]->lock);
3661         }
3662
3663         /* Allocate and claim adapter resources */
3664         if (!claim_resources(port_array[0])) {
3665
3666                 alloc_dma_bufs(port_array[0]);
3667
3668                 /* copy resource information from first port to others */
3669                 for (i = 1; i < port_count; ++i) {
3670                         port_array[i]->irq_level = port_array[0]->irq_level;
3671                         port_array[i]->reg_addr  = port_array[0]->reg_addr;
3672                         alloc_dma_bufs(port_array[i]);
3673                 }
3674
3675                 if (request_irq(port_array[0]->irq_level,
3676                                         slgt_interrupt,
3677                                         port_array[0]->irq_flags,
3678                                         port_array[0]->device_name,
3679                                         port_array[0]) < 0) {
3680                         DBGERR(("%s request_irq failed IRQ=%d\n",
3681                                 port_array[0]->device_name,
3682                                 port_array[0]->irq_level));
3683                 } else {
3684                         port_array[0]->irq_requested = true;
3685                         adapter_test(port_array[0]);
3686                         for (i=1 ; i < port_count ; i++) {
3687                                 port_array[i]->init_error = port_array[0]->init_error;
3688                                 port_array[i]->gpio_present = port_array[0]->gpio_present;
3689                         }
3690                 }
3691         }
3692
3693         for (i=0; i < port_count; ++i)
3694                 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3695 }
3696
3697 static int __devinit init_one(struct pci_dev *dev,
3698                               const struct pci_device_id *ent)
3699 {
3700         if (pci_enable_device(dev)) {
3701                 printk("error enabling pci device %p\n", dev);
3702                 return -EIO;
3703         }
3704         pci_set_master(dev);
3705         device_init(slgt_device_count, dev);
3706         return 0;
3707 }
3708
3709 static void __devexit remove_one(struct pci_dev *dev)
3710 {
3711 }
3712
3713 static const struct tty_operations ops = {
3714         .open = open,
3715         .close = close,
3716         .write = write,
3717         .put_char = put_char,
3718         .flush_chars = flush_chars,
3719         .write_room = write_room,
3720         .chars_in_buffer = chars_in_buffer,
3721         .flush_buffer = flush_buffer,
3722         .ioctl = ioctl,
3723         .compat_ioctl = slgt_compat_ioctl,
3724         .throttle = throttle,
3725         .unthrottle = unthrottle,
3726         .send_xchar = send_xchar,
3727         .break_ctl = set_break,
3728         .wait_until_sent = wait_until_sent,
3729         .set_termios = set_termios,
3730         .stop = tx_hold,
3731         .start = tx_release,
3732         .hangup = hangup,
3733         .tiocmget = tiocmget,
3734         .tiocmset = tiocmset,
3735         .get_icount = get_icount,
3736         .proc_fops = &synclink_gt_proc_fops,
3737 };
3738
3739 static void slgt_cleanup(void)
3740 {
3741         int rc;
3742         struct slgt_info *info;
3743         struct slgt_info *tmp;
3744
3745         printk(KERN_INFO "unload %s\n", driver_name);
3746
3747         if (serial_driver) {
3748                 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3749                         tty_unregister_device(serial_driver, info->line);
3750                 if ((rc = tty_unregister_driver(serial_driver)))
3751                         DBGERR(("tty_unregister_driver error=%d\n", rc));
3752                 put_tty_driver(serial_driver);
3753         }
3754
3755         /* reset devices */
3756         info = slgt_device_list;
3757         while(info) {
3758                 reset_port(info);
3759                 info = info->next_device;
3760         }
3761
3762         /* release devices */
3763         info = slgt_device_list;
3764         while(info) {
3765 #if SYNCLINK_GENERIC_HDLC
3766                 hdlcdev_exit(info);
3767 #endif
3768                 free_dma_bufs(info);
3769                 free_tmp_rbuf(info);
3770                 if (info->port_num == 0)
3771                         release_resources(info);
3772                 tmp = info;
3773                 info = info->next_device;
3774                 kfree(tmp);
3775         }
3776
3777         if (pci_registered)
3778                 pci_unregister_driver(&pci_driver);
3779 }
3780
3781 /*
3782  *  Driver initialization entry point.
3783  */
3784 static int __init slgt_init(void)
3785 {
3786         int rc;
3787
3788         printk(KERN_INFO "%s\n", driver_name);
3789
3790         serial_driver = alloc_tty_driver(MAX_DEVICES);
3791         if (!serial_driver) {
3792                 printk("%s can't allocate tty driver\n", driver_name);
3793                 return -ENOMEM;
3794         }
3795
3796         /* Initialize the tty_driver structure */
3797
3798         serial_driver->driver_name = tty_driver_name;
3799         serial_driver->name = tty_dev_prefix;
3800         serial_driver->major = ttymajor;
3801         serial_driver->minor_start = 64;
3802         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3803         serial_driver->subtype = SERIAL_TYPE_NORMAL;
3804         serial_driver->init_termios = tty_std_termios;
3805         serial_driver->init_termios.c_cflag =
3806                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3807         serial_driver->init_termios.c_ispeed = 9600;
3808         serial_driver->init_termios.c_ospeed = 9600;
3809         serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3810         tty_set_operations(serial_driver, &ops);
3811         if ((rc = tty_register_driver(serial_driver)) < 0) {
3812                 DBGERR(("%s can't register serial driver\n", driver_name));
3813                 put_tty_driver(serial_driver);
3814                 serial_driver = NULL;
3815                 goto error;
3816         }
3817
3818         printk(KERN_INFO "%s, tty major#%d\n",
3819                driver_name, serial_driver->major);
3820
3821         slgt_device_count = 0;
3822         if ((rc = pci_register_driver(&pci_driver)) < 0) {
3823                 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3824                 goto error;
3825         }
3826         pci_registered = true;
3827
3828         if (!slgt_device_list)
3829                 printk("%s no devices found\n",driver_name);
3830
3831         return 0;
3832
3833 error:
3834         slgt_cleanup();
3835         return rc;
3836 }
3837
3838 static void __exit slgt_exit(void)
3839 {
3840         slgt_cleanup();
3841 }
3842
3843 module_init(slgt_init);
3844 module_exit(slgt_exit);
3845
3846 /*
3847  * register access routines
3848  */
3849
3850 #define CALC_REGADDR() \
3851         unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3852         if (addr >= 0x80) \
3853                 reg_addr += (info->port_num) * 32; \
3854         else if (addr >= 0x40)  \
3855                 reg_addr += (info->port_num) * 16;
3856
3857 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3858 {
3859         CALC_REGADDR();
3860         return readb((void __iomem *)reg_addr);
3861 }
3862
3863 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3864 {
3865         CALC_REGADDR();
3866         writeb(value, (void __iomem *)reg_addr);
3867 }
3868
3869 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3870 {
3871         CALC_REGADDR();
3872         return readw((void __iomem *)reg_addr);
3873 }
3874
3875 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3876 {
3877         CALC_REGADDR();
3878         writew(value, (void __iomem *)reg_addr);
3879 }
3880
3881 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3882 {
3883         CALC_REGADDR();
3884         return readl((void __iomem *)reg_addr);
3885 }
3886
3887 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3888 {
3889         CALC_REGADDR();
3890         writel(value, (void __iomem *)reg_addr);
3891 }
3892
3893 static void rdma_reset(struct slgt_info *info)
3894 {
3895         unsigned int i;
3896
3897         /* set reset bit */
3898         wr_reg32(info, RDCSR, BIT1);
3899
3900         /* wait for enable bit cleared */
3901         for(i=0 ; i < 1000 ; i++)
3902                 if (!(rd_reg32(info, RDCSR) & BIT0))
3903                         break;
3904 }
3905
3906 static void tdma_reset(struct slgt_info *info)
3907 {
3908         unsigned int i;
3909
3910         /* set reset bit */
3911         wr_reg32(info, TDCSR, BIT1);
3912
3913         /* wait for enable bit cleared */
3914         for(i=0 ; i < 1000 ; i++)
3915                 if (!(rd_reg32(info, TDCSR) & BIT0))
3916                         break;
3917 }
3918
3919 /*
3920  * enable internal loopback
3921  * TxCLK and RxCLK are generated from BRG
3922  * and TxD is looped back to RxD internally.
3923  */
3924 static void enable_loopback(struct slgt_info *info)
3925 {
3926         /* SCR (serial control) BIT2=loopback enable */
3927         wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3928
3929         if (info->params.mode != MGSL_MODE_ASYNC) {
3930                 /* CCR (clock control)
3931                  * 07..05  tx clock source (010 = BRG)
3932                  * 04..02  rx clock source (010 = BRG)
3933                  * 01      auxclk enable   (0 = disable)
3934                  * 00      BRG enable      (1 = enable)
3935                  *
3936                  * 0100 1001
3937                  */
3938                 wr_reg8(info, CCR, 0x49);
3939
3940                 /* set speed if available, otherwise use default */
3941                 if (info->params.clock_speed)
3942                         set_rate(info, info->params.clock_speed);
3943                 else
3944                         set_rate(info, 3686400);
3945         }
3946 }
3947
3948 /*
3949  *  set baud rate generator to specified rate
3950  */
3951 static void set_rate(struct slgt_info *info, u32 rate)
3952 {
3953         unsigned int div;
3954         unsigned int osc = info->base_clock;
3955
3956         /* div = osc/rate - 1
3957          *
3958          * Round div up if osc/rate is not integer to
3959          * force to next slowest rate.
3960          */
3961
3962         if (rate) {
3963                 div = osc/rate;
3964                 if (!(osc % rate) && div)
3965                         div--;
3966                 wr_reg16(info, BDR, (unsigned short)div);
3967         }
3968 }
3969
3970 static void rx_stop(struct slgt_info *info)
3971 {
3972         unsigned short val;
3973
3974         /* disable and reset receiver */
3975         val = rd_reg16(info, RCR) & ~BIT1;          /* clear enable bit */
3976         wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3977         wr_reg16(info, RCR, val);                  /* clear reset bit */
3978
3979         slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3980
3981         /* clear pending rx interrupts */
3982         wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3983
3984         rdma_reset(info);
3985
3986         info->rx_enabled = false;
3987         info->rx_restart = false;
3988 }
3989
3990 static void rx_start(struct slgt_info *info)
3991 {
3992         unsigned short val;
3993
3994         slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3995
3996         /* clear pending rx overrun IRQ */
3997         wr_reg16(info, SSR, IRQ_RXOVER);
3998
3999         /* reset and disable receiver */
4000         val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
4001         wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
4002         wr_reg16(info, RCR, val);                  /* clear reset bit */
4003
4004         rdma_reset(info);
4005         reset_rbufs(info);
4006
4007         if (info->rx_pio) {
4008                 /* rx request when rx FIFO not empty */
4009                 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
4010                 slgt_irq_on(info, IRQ_RXDATA);
4011                 if (info->params.mode == MGSL_MODE_ASYNC) {
4012                         /* enable saving of rx status */
4013                         wr_reg32(info, RDCSR, BIT6);
4014                 }
4015         } else {
4016                 /* rx request when rx FIFO half full */
4017                 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
4018                 /* set 1st descriptor address */
4019                 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
4020
4021                 if (info->params.mode != MGSL_MODE_ASYNC) {
4022                         /* enable rx DMA and DMA interrupt */
4023                         wr_reg32(info, RDCSR, (BIT2 + BIT0));
4024                 } else {
4025                         /* enable saving of rx status, rx DMA and DMA interrupt */
4026                         wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
4027                 }
4028         }
4029
4030         slgt_irq_on(info, IRQ_RXOVER);
4031
4032         /* enable receiver */
4033         wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
4034
4035         info->rx_restart = false;
4036         info->rx_enabled = true;
4037 }
4038
4039 static void tx_start(struct slgt_info *info)
4040 {
4041         if (!info->tx_enabled) {
4042                 wr_reg16(info, TCR,
4043                          (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
4044                 info->tx_enabled = true;
4045         }
4046
4047         if (desc_count(info->tbufs[info->tbuf_start])) {
4048                 info->drop_rts_on_tx_done = false;
4049
4050                 if (info->params.mode != MGSL_MODE_ASYNC) {
4051                         if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
4052                                 get_signals(info);
4053                                 if (!(info->signals & SerialSignal_RTS)) {
4054                                         info->signals |= SerialSignal_RTS;
4055                                         set_signals(info);
4056                                         info->drop_rts_on_tx_done = true;
4057                                 }
4058                         }
4059
4060                         slgt_irq_off(info, IRQ_TXDATA);
4061                         slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
4062                         /* clear tx idle and underrun status bits */
4063                         wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
4064                 } else {
4065                         slgt_irq_off(info, IRQ_TXDATA);
4066                         slgt_irq_on(info, IRQ_TXIDLE);
4067                         /* clear tx idle status bit */
4068                         wr_reg16(info, SSR, IRQ_TXIDLE);
4069                 }
4070                 /* set 1st descriptor address and start DMA */
4071                 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
4072                 wr_reg32(info, TDCSR, BIT2 + BIT0);
4073                 info->tx_active = true;
4074         }
4075 }
4076
4077 static void tx_stop(struct slgt_info *info)
4078 {
4079         unsigned short val;
4080
4081         del_timer(&info->tx_timer);
4082
4083         tdma_reset(info);
4084
4085         /* reset and disable transmitter */
4086         val = rd_reg16(info, TCR) & ~BIT1;          /* clear enable bit */
4087         wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
4088
4089         slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
4090
4091         /* clear tx idle and underrun status bit */
4092         wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
4093
4094         reset_tbufs(info);
4095
4096         info->tx_enabled = false;
4097         info->tx_active = false;
4098 }
4099
4100 static void reset_port(struct slgt_info *info)
4101 {
4102         if (!info->reg_addr)
4103                 return;
4104
4105         tx_stop(info);
4106         rx_stop(info);
4107
4108         info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4109         set_signals(info);
4110
4111         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4112 }
4113
4114 static void reset_adapter(struct slgt_info *info)
4115 {
4116         int i;
4117         for (i=0; i < info->port_count; ++i) {
4118                 if (info->port_array[i])
4119                         reset_port(info->port_array[i]);
4120         }
4121 }
4122
4123 static void async_mode(struct slgt_info *info)
4124 {
4125         unsigned short val;
4126
4127         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4128         tx_stop(info);
4129         rx_stop(info);
4130
4131         /* TCR (tx control)
4132          *
4133          * 15..13  mode, 010=async
4134          * 12..10  encoding, 000=NRZ
4135          * 09      parity enable
4136          * 08      1=odd parity, 0=even parity
4137          * 07      1=RTS driver control
4138          * 06      1=break enable
4139          * 05..04  character length
4140          *         00=5 bits
4141          *         01=6 bits
4142          *         10=7 bits
4143          *         11=8 bits
4144          * 03      0=1 stop bit, 1=2 stop bits
4145          * 02      reset
4146          * 01      enable
4147          * 00      auto-CTS enable
4148          */
4149         val = 0x4000;
4150
4151         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4152                 val |= BIT7;
4153
4154         if (info->params.parity != ASYNC_PARITY_NONE) {
4155                 val |= BIT9;
4156                 if (info->params.parity == ASYNC_PARITY_ODD)
4157                         val |= BIT8;
4158         }
4159
4160         switch (info->params.data_bits)
4161         {
4162         case 6: val |= BIT4; break;
4163         case 7: val |= BIT5; break;
4164         case 8: val |= BIT5 + BIT4; break;
4165         }
4166
4167         if (info->params.stop_bits != 1)
4168                 val |= BIT3;
4169
4170         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4171                 val |= BIT0;
4172
4173         wr_reg16(info, TCR, val);
4174
4175         /* RCR (rx control)
4176          *
4177          * 15..13  mode, 010=async
4178          * 12..10  encoding, 000=NRZ
4179          * 09      parity enable
4180          * 08      1=odd parity, 0=even parity
4181          * 07..06  reserved, must be 0
4182          * 05..04  character length
4183          *         00=5 bits
4184          *         01=6 bits
4185          *         10=7 bits
4186          *         11=8 bits
4187          * 03      reserved, must be zero
4188          * 02      reset
4189          * 01      enable
4190          * 00      auto-DCD enable
4191          */
4192         val = 0x4000;
4193
4194         if (info->params.parity != ASYNC_PARITY_NONE) {
4195                 val |= BIT9;
4196                 if (info->params.parity == ASYNC_PARITY_ODD)
4197                         val |= BIT8;
4198         }
4199
4200         switch (info->params.data_bits)
4201         {
4202         case 6: val |= BIT4; break;
4203         case 7: val |= BIT5; break;
4204         case 8: val |= BIT5 + BIT4; break;
4205         }
4206
4207         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4208                 val |= BIT0;
4209
4210         wr_reg16(info, RCR, val);
4211
4212         /* CCR (clock control)
4213          *
4214          * 07..05  011 = tx clock source is BRG/16
4215          * 04..02  010 = rx clock source is BRG
4216          * 01      0 = auxclk disabled
4217          * 00      1 = BRG enabled
4218          *
4219          * 0110 1001
4220          */
4221         wr_reg8(info, CCR, 0x69);
4222
4223         msc_set_vcr(info);
4224
4225         /* SCR (serial control)
4226          *
4227          * 15  1=tx req on FIFO half empty
4228          * 14  1=rx req on FIFO half full
4229          * 13  tx data  IRQ enable
4230          * 12  tx idle  IRQ enable
4231          * 11  rx break on IRQ enable
4232          * 10  rx data  IRQ enable
4233          * 09  rx break off IRQ enable
4234          * 08  overrun  IRQ enable
4235          * 07  DSR      IRQ enable
4236          * 06  CTS      IRQ enable
4237          * 05  DCD      IRQ enable
4238          * 04  RI       IRQ enable
4239          * 03  0=16x sampling, 1=8x sampling
4240          * 02  1=txd->rxd internal loopback enable
4241          * 01  reserved, must be zero
4242          * 00  1=master IRQ enable
4243          */
4244         val = BIT15 + BIT14 + BIT0;
4245         /* JCR[8] : 1 = x8 async mode feature available */
4246         if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
4247             ((info->base_clock < (info->params.data_rate * 16)) ||
4248              (info->base_clock % (info->params.data_rate * 16)))) {
4249                 /* use 8x sampling */
4250                 val |= BIT3;
4251                 set_rate(info, info->params.data_rate * 8);
4252         } else {
4253                 /* use 16x sampling */
4254                 set_rate(info, info->params.data_rate * 16);
4255         }
4256         wr_reg16(info, SCR, val);
4257
4258         slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4259
4260         if (info->params.loopback)
4261                 enable_loopback(info);
4262 }
4263
4264 static void sync_mode(struct slgt_info *info)
4265 {
4266         unsigned short val;
4267
4268         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4269         tx_stop(info);
4270         rx_stop(info);
4271
4272         /* TCR (tx control)
4273          *
4274          * 15..13  mode
4275          *         000=HDLC/SDLC
4276          *         001=raw bit synchronous
4277          *         010=asynchronous/isochronous
4278          *         011=monosync byte synchronous
4279          *         100=bisync byte synchronous
4280          *         101=xsync byte synchronous
4281          * 12..10  encoding
4282          * 09      CRC enable
4283          * 08      CRC32
4284          * 07      1=RTS driver control
4285          * 06      preamble enable
4286          * 05..04  preamble length
4287          * 03      share open/close flag
4288          * 02      reset
4289          * 01      enable
4290          * 00      auto-CTS enable
4291          */
4292         val = BIT2;
4293
4294         switch(info->params.mode) {
4295         case MGSL_MODE_XSYNC:
4296                 val |= BIT15 + BIT13;
4297                 break;
4298         case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4299         case MGSL_MODE_BISYNC:   val |= BIT15; break;
4300         case MGSL_MODE_RAW:      val |= BIT13; break;
4301         }
4302         if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4303                 val |= BIT7;
4304
4305         switch(info->params.encoding)
4306         {
4307         case HDLC_ENCODING_NRZB:          val |= BIT10; break;
4308         case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
4309         case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
4310         case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
4311         case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4312         case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4313         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4314         }
4315
4316         switch (info->params.crc_type & HDLC_CRC_MASK)
4317         {
4318         case HDLC_CRC_16_CCITT: val |= BIT9; break;
4319         case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4320         }
4321
4322         if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4323                 val |= BIT6;
4324
4325         switch (info->params.preamble_length)
4326         {
4327         case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4328         case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4329         case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4330         }
4331
4332         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4333                 val |= BIT0;
4334
4335         wr_reg16(info, TCR, val);
4336
4337         /* TPR (transmit preamble) */
4338
4339         switch (info->params.preamble)
4340         {
4341         case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4342         case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
4343         case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4344         case HDLC_PREAMBLE_PATTERN_10:    val = 0x55; break;
4345         case HDLC_PREAMBLE_PATTERN_01:    val = 0xaa; break;
4346         default:                          val = 0x7e; break;
4347         }
4348         wr_reg8(info, TPR, (unsigned char)val);
4349
4350         /* RCR (rx control)
4351          *
4352          * 15..13  mode
4353          *         000=HDLC/SDLC
4354          *         001=raw bit synchronous
4355          *         010=asynchronous/isochronous
4356          *         011=monosync byte synchronous
4357          *         100=bisync byte synchronous
4358          *         101=xsync byte synchronous
4359          * 12..10  encoding
4360          * 09      CRC enable
4361          * 08      CRC32
4362          * 07..03  reserved, must be 0
4363          * 02      reset
4364          * 01      enable
4365          * 00      auto-DCD enable
4366          */
4367         val = 0;
4368
4369         switch(info->params.mode) {
4370         case MGSL_MODE_XSYNC:
4371                 val |= BIT15 + BIT13;
4372                 break;
4373         case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4374         case MGSL_MODE_BISYNC:   val |= BIT15; break;
4375         case MGSL_MODE_RAW:      val |= BIT13; break;
4376         }
4377
4378         switch(info->params.encoding)
4379         {
4380         case HDLC_ENCODING_NRZB:          val |= BIT10; break;
4381         case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
4382         case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
4383         case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
4384         case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4385         case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4386         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4387         }
4388
4389         switch (info->params.crc_type & HDLC_CRC_MASK)
4390         {
4391         case HDLC_CRC_16_CCITT: val |= BIT9; break;
4392         case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4393         }
4394
4395         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4396                 val |= BIT0;
4397
4398         wr_reg16(info, RCR, val);
4399
4400         /* CCR (clock control)
4401          *
4402          * 07..05  tx clock source
4403          * 04..02  rx clock source
4404          * 01      auxclk enable
4405          * 00      BRG enable
4406          */
4407         val = 0;
4408
4409         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4410         {
4411                 // when RxC source is DPLL, BRG generates 16X DPLL
4412                 // reference clock, so take TxC from BRG/16 to get
4413                 // transmit clock at actual data rate
4414                 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4415                         val |= BIT6 + BIT5;     /* 011, txclk = BRG/16 */
4416                 else
4417                         val |= BIT6;    /* 010, txclk = BRG */
4418         }
4419         else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4420                 val |= BIT7;    /* 100, txclk = DPLL Input */
4421         else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4422                 val |= BIT5;    /* 001, txclk = RXC Input */
4423
4424         if (info->params.flags & HDLC_FLAG_RXC_BRG)
4425                 val |= BIT3;    /* 010, rxclk = BRG */
4426         else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4427                 val |= BIT4;    /* 100, rxclk = DPLL */
4428         else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4429                 val |= BIT2;    /* 001, rxclk = TXC Input */
4430
4431         if (info->params.clock_speed)
4432                 val |= BIT1 + BIT0;
4433
4434         wr_reg8(info, CCR, (unsigned char)val);
4435
4436         if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4437         {
4438                 // program DPLL mode
4439                 switch(info->params.encoding)
4440                 {
4441                 case HDLC_ENCODING_BIPHASE_MARK:
4442                 case HDLC_ENCODING_BIPHASE_SPACE:
4443                         val = BIT7; break;
4444                 case HDLC_ENCODING_BIPHASE_LEVEL:
4445                 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4446                         val = BIT7 + BIT6; break;
4447                 default: val = BIT6;    // NRZ encodings
4448                 }
4449                 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4450
4451                 // DPLL requires a 16X reference clock from BRG
4452                 set_rate(info, info->params.clock_speed * 16);
4453         }
4454         else
4455                 set_rate(info, info->params.clock_speed);
4456
4457         tx_set_idle(info);
4458
4459         msc_set_vcr(info);
4460
4461         /* SCR (serial control)
4462          *
4463          * 15  1=tx req on FIFO half empty
4464          * 14  1=rx req on FIFO half full
4465          * 13  tx data  IRQ enable
4466          * 12  tx idle  IRQ enable
4467          * 11  underrun IRQ enable
4468          * 10  rx data  IRQ enable
4469          * 09  rx idle  IRQ enable
4470          * 08  overrun  IRQ enable
4471          * 07  DSR      IRQ enable
4472          * 06  CTS      IRQ enable
4473          * 05  DCD      IRQ enable
4474          * 04  RI       IRQ enable
4475          * 03  reserved, must be zero
4476          * 02  1=txd->rxd internal loopback enable
4477          * 01  reserved, must be zero
4478          * 00  1=master IRQ enable
4479          */
4480         wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4481
4482         if (info->params.loopback)
4483                 enable_loopback(info);
4484 }
4485
4486 /*
4487  *  set transmit idle mode
4488  */
4489 static void tx_set_idle(struct slgt_info *info)
4490 {
4491         unsigned char val;
4492         unsigned short tcr;
4493
4494         /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4495          * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4496          */
4497         tcr = rd_reg16(info, TCR);
4498         if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4499                 /* disable preamble, set idle size to 16 bits */
4500                 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4501                 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4502                 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4503         } else if (!(tcr & BIT6)) {
4504                 /* preamble is disabled, set idle size to 8 bits */
4505                 tcr &= ~(BIT5 + BIT4);
4506         }
4507         wr_reg16(info, TCR, tcr);
4508
4509         if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4510                 /* LSB of custom tx idle specified in tx idle register */
4511                 val = (unsigned char)(info->idle_mode & 0xff);
4512         } else {
4513                 /* standard 8 bit idle patterns */
4514                 switch(info->idle_mode)
4515                 {
4516                 case HDLC_TXIDLE_FLAGS:          val = 0x7e; break;
4517                 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4518                 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4519                 case HDLC_TXIDLE_ZEROS:
4520                 case HDLC_TXIDLE_SPACE:          val = 0x00; break;
4521                 default:                         val = 0xff;
4522                 }
4523         }
4524
4525         wr_reg8(info, TIR, val);
4526 }
4527
4528 /*
4529  * get state of V24 status (input) signals
4530  */
4531 static void get_signals(struct slgt_info *info)
4532 {
4533         unsigned short status = rd_reg16(info, SSR);
4534
4535         /* clear all serial signals except DTR and RTS */
4536         info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4537
4538         if (status & BIT3)
4539                 info->signals |= SerialSignal_DSR;
4540         if (status & BIT2)
4541                 info->signals |= SerialSignal_CTS;
4542         if (status & BIT1)
4543                 info->signals |= SerialSignal_DCD;
4544         if (status & BIT0)
4545                 info->signals |= SerialSignal_RI;
4546 }
4547
4548 /*
4549  * set V.24 Control Register based on current configuration
4550  */
4551 static void msc_set_vcr(struct slgt_info *info)
4552 {
4553         unsigned char val = 0;
4554
4555         /* VCR (V.24 control)
4556          *
4557          * 07..04  serial IF select
4558          * 03      DTR
4559          * 02      RTS
4560          * 01      LL
4561          * 00      RL
4562          */
4563
4564         switch(info->if_mode & MGSL_INTERFACE_MASK)
4565         {
4566         case MGSL_INTERFACE_RS232:
4567                 val |= BIT5; /* 0010 */
4568                 break;
4569         case MGSL_INTERFACE_V35:
4570                 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4571                 break;
4572         case MGSL_INTERFACE_RS422:
4573                 val |= BIT6; /* 0100 */
4574                 break;
4575         }
4576
4577         if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
4578                 val |= BIT4;
4579         if (info->signals & SerialSignal_DTR)
4580                 val |= BIT3;
4581         if (info->signals & SerialSignal_RTS)
4582                 val |= BIT2;
4583         if (info->if_mode & MGSL_INTERFACE_LL)
4584                 val |= BIT1;
4585         if (info->if_mode & MGSL_INTERFACE_RL)
4586                 val |= BIT0;
4587         wr_reg8(info, VCR, val);
4588 }
4589
4590 /*
4591  * set state of V24 control (output) signals
4592  */
4593 static void set_signals(struct slgt_info *info)
4594 {
4595         unsigned char val = rd_reg8(info, VCR);
4596         if (info->signals & SerialSignal_DTR)
4597                 val |= BIT3;
4598         else
4599                 val &= ~BIT3;
4600         if (info->signals & SerialSignal_RTS)
4601                 val |= BIT2;
4602         else
4603                 val &= ~BIT2;
4604         wr_reg8(info, VCR, val);
4605 }
4606
4607 /*
4608  * free range of receive DMA buffers (i to last)
4609  */
4610 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4611 {
4612         int done = 0;
4613
4614         while(!done) {
4615                 /* reset current buffer for reuse */
4616                 info->rbufs[i].status = 0;
4617                 set_desc_count(info->rbufs[i], info->rbuf_fill_level);
4618                 if (i == last)
4619                         done = 1;
4620                 if (++i == info->rbuf_count)
4621                         i = 0;
4622         }
4623         info->rbuf_current = i;
4624 }
4625
4626 /*
4627  * mark all receive DMA buffers as free
4628  */
4629 static void reset_rbufs(struct slgt_info *info)
4630 {
4631         free_rbufs(info, 0, info->rbuf_count - 1);
4632         info->rbuf_fill_index = 0;
4633         info->rbuf_fill_count = 0;
4634 }
4635
4636 /*
4637  * pass receive HDLC frame to upper layer
4638  *
4639  * return true if frame available, otherwise false
4640  */
4641 static bool rx_get_frame(struct slgt_info *info)
4642 {
4643         unsigned int start, end;
4644         unsigned short status;
4645         unsigned int framesize = 0;
4646         unsigned long flags;
4647         struct tty_struct *tty = info->port.tty;
4648         unsigned char addr_field = 0xff;
4649         unsigned int crc_size = 0;
4650
4651         switch (info->params.crc_type & HDLC_CRC_MASK) {
4652         case HDLC_CRC_16_CCITT: crc_size = 2; break;
4653         case HDLC_CRC_32_CCITT: crc_size = 4; break;
4654         }
4655
4656 check_again:
4657
4658         framesize = 0;
4659         addr_field = 0xff;
4660         start = end = info->rbuf_current;
4661
4662         for (;;) {
4663                 if (!desc_complete(info->rbufs[end]))
4664                         goto cleanup;
4665
4666                 if (framesize == 0 && info->params.addr_filter != 0xff)
4667                         addr_field = info->rbufs[end].buf[0];
4668
4669                 framesize += desc_count(info->rbufs[end]);
4670
4671                 if (desc_eof(info->rbufs[end]))
4672                         break;
4673
4674                 if (++end == info->rbuf_count)
4675                         end = 0;
4676
4677                 if (end == info->rbuf_current) {
4678                         if (info->rx_enabled){
4679                                 spin_lock_irqsave(&info->lock,flags);
4680                                 rx_start(info);
4681                                 spin_unlock_irqrestore(&info->lock,flags);
4682                         }
4683                         goto cleanup;
4684                 }
4685         }
4686
4687         /* status
4688          *
4689          * 15      buffer complete
4690          * 14..06  reserved
4691          * 05..04  residue
4692          * 02      eof (end of frame)
4693          * 01      CRC error
4694          * 00      abort
4695          */
4696         status = desc_status(info->rbufs[end]);
4697
4698         /* ignore CRC bit if not using CRC (bit is undefined) */
4699         if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4700                 status &= ~BIT1;
4701
4702         if (framesize == 0 ||
4703                  (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4704                 free_rbufs(info, start, end);
4705                 goto check_again;
4706         }
4707
4708         if (framesize < (2 + crc_size) || status & BIT0) {
4709                 info->icount.rxshort++;
4710                 framesize = 0;
4711         } else if (status & BIT1) {
4712                 info->icount.rxcrc++;
4713                 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4714                         framesize = 0;
4715         }
4716
4717 #if SYNCLINK_GENERIC_HDLC
4718         if (framesize == 0) {
4719                 info->netdev->stats.rx_errors++;
4720                 info->netdev->stats.rx_frame_errors++;
4721         }
4722 #endif
4723
4724         DBGBH(("%s rx frame status=%04X size=%d\n",
4725                 info->device_name, status, framesize));
4726         DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
4727
4728         if (framesize) {
4729                 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4730                         framesize -= crc_size;
4731                         crc_size = 0;
4732                 }
4733
4734                 if (framesize > info->max_frame_size + crc_size)
4735                         info->icount.rxlong++;
4736                 else {
4737                         /* copy dma buffer(s) to contiguous temp buffer */
4738                         int copy_count = framesize;
4739                         int i = start;
4740                         unsigned char *p = info->tmp_rbuf;
4741                         info->tmp_rbuf_count = framesize;
4742
4743                         info->icount.rxok++;
4744
4745                         while(copy_count) {
4746                                 int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
4747                                 memcpy(p, info->rbufs[i].buf, partial_count);
4748                                 p += partial_count;
4749                                 copy_count -= partial_count;
4750                                 if (++i == info->rbuf_count)
4751                                         i = 0;
4752                         }
4753
4754                         if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4755                                 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4756                                 framesize++;
4757                         }
4758
4759 #if SYNCLINK_GENERIC_HDLC
4760                         if (info->netcount)
4761                                 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4762                         else
4763 #endif
4764                                 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4765                 }
4766         }
4767         free_rbufs(info, start, end);
4768         return true;
4769
4770 cleanup:
4771         return false;
4772 }
4773
4774 /*
4775  * pass receive buffer (RAW synchronous mode) to tty layer
4776  * return true if buffer available, otherwise false
4777  */
4778 static bool rx_get_buf(struct slgt_info *info)
4779 {
4780         unsigned int i = info->rbuf_current;
4781         unsigned int count;
4782
4783         if (!desc_complete(info->rbufs[i]))
4784                 return false;
4785         count = desc_count(info->rbufs[i]);
4786         switch(info->params.mode) {
4787         case MGSL_MODE_MONOSYNC:
4788         case MGSL_MODE_BISYNC:
4789         case MGSL_MODE_XSYNC:
4790                 /* ignore residue in byte synchronous modes */
4791                 if (desc_residue(info->rbufs[i]))
4792                         count--;
4793                 break;
4794         }
4795         DBGDATA(info, info->rbufs[i].buf, count, "rx");
4796         DBGINFO(("rx_get_buf size=%d\n", count));
4797         if (count)
4798                 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
4799                                   info->flag_buf, count);
4800         free_rbufs(info, i, i);
4801         return true;
4802 }
4803
4804 static void reset_tbufs(struct slgt_info *info)
4805 {
4806         unsigned int i;
4807         info->tbuf_current = 0;
4808         for (i=0 ; i < info->tbuf_count ; i++) {
4809                 info->tbufs[i].status = 0;
4810                 info->tbufs[i].count  = 0;
4811         }
4812 }
4813
4814 /*
4815  * return number of free transmit DMA buffers
4816  */
4817 static unsigned int free_tbuf_count(struct slgt_info *info)
4818 {
4819         unsigned int count = 0;
4820         unsigned int i = info->tbuf_current;
4821
4822         do
4823         {
4824                 if (desc_count(info->tbufs[i]))
4825                         break; /* buffer in use */
4826                 ++count;
4827                 if (++i == info->tbuf_count)
4828                         i=0;
4829         } while (i != info->tbuf_current);
4830
4831         /* if tx DMA active, last zero count buffer is in use */
4832         if (count && (rd_reg32(info, TDCSR) & BIT0))
4833                 --count;
4834
4835         return count;
4836 }
4837
4838 /*
4839  * return number of bytes in unsent transmit DMA buffers
4840  * and the serial controller tx FIFO
4841  */
4842 static unsigned int tbuf_bytes(struct slgt_info *info)
4843 {
4844         unsigned int total_count = 0;
4845         unsigned int i = info->tbuf_current;
4846         unsigned int reg_value;
4847         unsigned int count;
4848         unsigned int active_buf_count = 0;
4849
4850         /*
4851          * Add descriptor counts for all tx DMA buffers.
4852          * If count is zero (cleared by DMA controller after read),
4853          * the buffer is complete or is actively being read from.
4854          *
4855          * Record buf_count of last buffer with zero count starting
4856          * from current ring position. buf_count is mirror
4857          * copy of count and is not cleared by serial controller.
4858          * If DMA controller is active, that buffer is actively
4859          * being read so add to total.
4860          */
4861         do {
4862                 count = desc_count(info->tbufs[i]);
4863                 if (count)
4864                         total_count += count;
4865                 else if (!total_count)
4866                         active_buf_count = info->tbufs[i].buf_count;
4867                 if (++i == info->tbuf_count)
4868                         i = 0;
4869         } while (i != info->tbuf_current);
4870
4871         /* read tx DMA status register */
4872         reg_value = rd_reg32(info, TDCSR);
4873
4874         /* if tx DMA active, last zero count buffer is in use */
4875         if (reg_value & BIT0)
4876                 total_count += active_buf_count;
4877
4878         /* add tx FIFO count = reg_value[15..8] */
4879         total_count += (reg_value >> 8) & 0xff;
4880
4881         /* if transmitter active add one byte for shift register */
4882         if (info->tx_active)
4883                 total_count++;
4884
4885         return total_count;
4886 }
4887
4888 /*
4889  * load data into transmit DMA buffer ring and start transmitter if needed
4890  * return true if data accepted, otherwise false (buffers full)
4891  */
4892 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4893 {
4894         unsigned short count;
4895         unsigned int i;
4896         struct slgt_desc *d;
4897
4898         /* check required buffer space */
4899         if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info))
4900                 return false;
4901
4902         DBGDATA(info, buf, size, "tx");
4903
4904         /*
4905          * copy data to one or more DMA buffers in circular ring
4906          * tbuf_start   = first buffer for this data
4907          * tbuf_current = next free buffer
4908          *
4909          * Copy all data before making data visible to DMA controller by
4910          * setting descriptor count of the first buffer.
4911          * This prevents an active DMA controller from reading the first DMA
4912          * buffers of a frame and stopping before the final buffers are filled.
4913          */
4914
4915         info->tbuf_start = i = info->tbuf_current;
4916
4917         while (size) {
4918                 d = &info->tbufs[i];
4919
4920                 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4921                 memcpy(d->buf, buf, count);
4922
4923                 size -= count;
4924                 buf  += count;
4925
4926                 /*
4927                  * set EOF bit for last buffer of HDLC frame or
4928                  * for every buffer in raw mode
4929                  */
4930                 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4931                     info->params.mode == MGSL_MODE_RAW)
4932                         set_desc_eof(*d, 1);
4933                 else
4934                         set_desc_eof(*d, 0);
4935
4936                 /* set descriptor count for all but first buffer */
4937                 if (i != info->tbuf_start)
4938                         set_desc_count(*d, count);
4939                 d->buf_count = count;
4940
4941                 if (++i == info->tbuf_count)
4942                         i = 0;
4943         }
4944
4945         info->tbuf_current = i;
4946
4947         /* set first buffer count to make new data visible to DMA controller */
4948         d = &info->tbufs[info->tbuf_start];
4949         set_desc_count(*d, d->buf_count);
4950
4951         /* start transmitter if needed and update transmit timeout */
4952         if (!info->tx_active)
4953                 tx_start(info);
4954         update_tx_timer(info);
4955
4956         return true;
4957 }
4958
4959 static int register_test(struct slgt_info *info)
4960 {
4961         static unsigned short patterns[] =
4962                 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4963         static unsigned int count = ARRAY_SIZE(patterns);
4964         unsigned int i;
4965         int rc = 0;
4966
4967         for (i=0 ; i < count ; i++) {
4968                 wr_reg16(info, TIR, patterns[i]);
4969                 wr_reg16(info, BDR, patterns[(i+1)%count]);
4970                 if ((rd_reg16(info, TIR) != patterns[i]) ||
4971                     (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4972                         rc = -ENODEV;
4973                         break;
4974                 }
4975         }
4976         info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4977         info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4978         return rc;
4979 }
4980
4981 static int irq_test(struct slgt_info *info)
4982 {
4983         unsigned long timeout;
4984         unsigned long flags;
4985         struct tty_struct *oldtty = info->port.tty;
4986         u32 speed = info->params.data_rate;
4987
4988         info->params.data_rate = 921600;
4989         info->port.tty = NULL;
4990
4991         spin_lock_irqsave(&info->lock, flags);
4992         async_mode(info);
4993         slgt_irq_on(info, IRQ_TXIDLE);
4994
4995         /* enable transmitter */
4996         wr_reg16(info, TCR,
4997                 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4998
4999         /* write one byte and wait for tx idle */
5000         wr_reg16(info, TDR, 0);
5001
5002         /* assume failure */
5003         info->init_error = DiagStatus_IrqFailure;
5004         info->irq_occurred = false;
5005
5006         spin_unlock_irqrestore(&info->lock, flags);
5007
5008         timeout=100;
5009         while(timeout-- && !info->irq_occurred)
5010                 msleep_interruptible(10);
5011
5012         spin_lock_irqsave(&info->lock,flags);
5013         reset_port(info);
5014         spin_unlock_irqrestore(&info->lock,flags);
5015
5016         info->params.data_rate = speed;
5017         info->port.tty = oldtty;
5018
5019         info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
5020         return info->irq_occurred ? 0 : -ENODEV;
5021 }
5022
5023 static int loopback_test_rx(struct slgt_info *info)
5024 {
5025         unsigned char *src, *dest;
5026         int count;
5027
5028         if (desc_complete(info->rbufs[0])) {
5029                 count = desc_count(info->rbufs[0]);
5030                 src   = info->rbufs[0].buf;
5031                 dest  = info->tmp_rbuf;
5032
5033                 for( ; count ; count-=2, src+=2) {
5034                         /* src=data byte (src+1)=status byte */
5035                         if (!(*(src+1) & (BIT9 + BIT8))) {
5036                                 *dest = *src;
5037                                 dest++;
5038                                 info->tmp_rbuf_count++;
5039                         }
5040                 }
5041                 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
5042                 return 1;
5043         }
5044         return 0;
5045 }
5046
5047 static int loopback_test(struct slgt_info *info)
5048 {
5049 #define TESTFRAMESIZE 20
5050
5051         unsigned long timeout;
5052         u16 count = TESTFRAMESIZE;
5053         unsigned char buf[TESTFRAMESIZE];
5054         int rc = -ENODEV;
5055         unsigned long flags;
5056
5057         struct tty_struct *oldtty = info->port.tty;
5058         MGSL_PARAMS params;
5059
5060         memcpy(&params, &info->params, sizeof(params));
5061
5062         info->params.mode = MGSL_MODE_ASYNC;
5063         info->params.data_rate = 921600;
5064         info->params.loopback = 1;
5065         info->port.tty = NULL;
5066
5067         /* build and send transmit frame */
5068         for (count = 0; count < TESTFRAMESIZE; ++count)
5069                 buf[count] = (unsigned char)count;
5070
5071         info->tmp_rbuf_count = 0;
5072         memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
5073
5074         /* program hardware for HDLC and enabled receiver */
5075         spin_lock_irqsave(&info->lock,flags);
5076         async_mode(info);
5077         rx_start(info);
5078         tx_load(info, buf, count);
5079         spin_unlock_irqrestore(&info->lock, flags);
5080
5081         /* wait for receive complete */
5082         for (timeout = 100; timeout; --timeout) {
5083                 msleep_interruptible(10);
5084                 if (loopback_test_rx(info)) {
5085                         rc = 0;
5086                         break;
5087                 }
5088         }
5089
5090         /* verify received frame length and contents */
5091         if (!rc && (info->tmp_rbuf_count != count ||
5092                   memcmp(buf, info->tmp_rbuf, count))) {
5093                 rc = -ENODEV;
5094         }
5095
5096         spin_lock_irqsave(&info->lock,flags);
5097         reset_adapter(info);
5098         spin_unlock_irqrestore(&info->lock,flags);
5099
5100         memcpy(&info->params, &params, sizeof(info->params));
5101         info->port.tty = oldtty;
5102
5103         info->init_error = rc ? DiagStatus_DmaFailure : 0;
5104         return rc;
5105 }
5106
5107 static int adapter_test(struct slgt_info *info)
5108 {
5109         DBGINFO(("testing %s\n", info->device_name));
5110         if (register_test(info) < 0) {
5111                 printk("register test failure %s addr=%08X\n",
5112                         info->device_name, info->phys_reg_addr);
5113         } else if (irq_test(info) < 0) {
5114                 printk("IRQ test failure %s IRQ=%d\n",
5115                         info->device_name, info->irq_level);
5116         } else if (loopback_test(info) < 0) {
5117                 printk("loopback test failure %s\n", info->device_name);
5118         }
5119         return info->init_error;
5120 }
5121
5122 /*
5123  * transmit timeout handler
5124  */
5125 static void tx_timeout(unsigned long context)
5126 {
5127         struct slgt_info *info = (struct slgt_info*)context;
5128         unsigned long flags;
5129
5130         DBGINFO(("%s tx_timeout\n", info->device_name));
5131         if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5132                 info->icount.txtimeout++;
5133         }
5134         spin_lock_irqsave(&info->lock,flags);
5135         tx_stop(info);
5136         spin_unlock_irqrestore(&info->lock,flags);
5137
5138 #if SYNCLINK_GENERIC_HDLC
5139         if (info->netcount)
5140                 hdlcdev_tx_done(info);
5141         else
5142 #endif
5143                 bh_transmit(info);
5144 }
5145
5146 /*
5147  * receive buffer polling timer
5148  */
5149 static void rx_timeout(unsigned long context)
5150 {
5151         struct slgt_info *info = (struct slgt_info*)context;
5152         unsigned long flags;
5153
5154         DBGINFO(("%s rx_timeout\n", info->device_name));
5155         spin_lock_irqsave(&info->lock, flags);
5156         info->pending_bh |= BH_RECEIVE;
5157         spin_unlock_irqrestore(&info->lock, flags);
5158         bh_handler(&info->task);
5159 }
5160