1 //=====================================================
2 // CopyRight (C) 2007 Qualcomm Inc. All Rights Reserved.
5 // This file is part of Express Card USB Driver
8 //====================================================
9 // 20090926; aelias; removed compiler warnings & errors; ubuntu 9.04; 2.6.28-15-generic
11 #include <linux/init.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/netdevice.h>
15 #include <linux/etherdevice.h>
16 #include <linux/usb.h>
17 #include "ft1000_usb.h"
18 #include <linux/types.h>
20 #define HARLEY_READ_REGISTER 0x0
21 #define HARLEY_WRITE_REGISTER 0x01
22 #define HARLEY_READ_DPRAM_32 0x02
23 #define HARLEY_READ_DPRAM_LOW 0x03
24 #define HARLEY_READ_DPRAM_HIGH 0x04
25 #define HARLEY_WRITE_DPRAM_32 0x05
26 #define HARLEY_WRITE_DPRAM_LOW 0x06
27 #define HARLEY_WRITE_DPRAM_HIGH 0x07
29 #define HARLEY_READ_OPERATION 0xc1
30 #define HARLEY_WRITE_OPERATION 0x41
34 static int ft1000_reset(struct net_device *ft1000dev);
35 static int ft1000_submit_rx_urb(struct ft1000_info *info);
36 static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev);
37 static int ft1000_open (struct net_device *dev);
38 static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev);
39 static int ft1000_chkcard (struct ft1000_device *dev);
43 static u8 tempbuffer[1600];
45 #define MAX_RCV_LOOP 100
47 //---------------------------------------------------------------------------
48 // Function: ft1000_control
50 // Parameters: ft1000_device - device structure
51 // pipe - usb control message pipe
52 // request - control request
53 // requesttype - control message request type
54 // value - value to be written or 0
55 // index - register index
56 // data - data buffer to hold the read/write values
58 // timeout - control message time out value
60 // Returns: STATUS_SUCCESS - success
61 // STATUS_FAILURE - failure
63 // Description: This function sends a control message via USB interface synchronously
67 //---------------------------------------------------------------------------
68 static int ft1000_control(struct ft1000_device *ft1000dev, unsigned int pipe,
69 u8 request, u8 requesttype, u16 value, u16 index,
70 void *data, u16 size, int timeout)
74 if ((ft1000dev == NULL) || (ft1000dev->dev == NULL)) {
75 DEBUG("ft1000dev or ft1000dev->dev == NULL, failure\n");
79 ret = usb_control_msg(ft1000dev->dev, pipe, request, requesttype,
80 value, index, data, size, LARGE_TIMEOUT);
88 //---------------------------------------------------------------------------
89 // Function: ft1000_read_register
91 // Parameters: ft1000_device - device structure
92 // Data - data buffer to hold the value read
93 // nRegIndex - register index
95 // Returns: STATUS_SUCCESS - success
96 // STATUS_FAILURE - failure
98 // Description: This function returns the value in a register
102 //---------------------------------------------------------------------------
104 int ft1000_read_register(struct ft1000_device *ft1000dev, u16* Data,
107 int ret = STATUS_SUCCESS;
109 ret = ft1000_control(ft1000dev,
110 usb_rcvctrlpipe(ft1000dev->dev, 0),
111 HARLEY_READ_REGISTER,
112 HARLEY_READ_OPERATION,
122 //---------------------------------------------------------------------------
123 // Function: ft1000_write_register
125 // Parameters: ft1000_device - device structure
126 // value - value to write into a register
127 // nRegIndex - register index
129 // Returns: STATUS_SUCCESS - success
130 // STATUS_FAILURE - failure
132 // Description: This function writes the value in a register
136 //---------------------------------------------------------------------------
137 int ft1000_write_register(struct ft1000_device *ft1000dev, u16 value,
140 int ret = STATUS_SUCCESS;
142 ret = ft1000_control(ft1000dev,
143 usb_sndctrlpipe(ft1000dev->dev, 0),
144 HARLEY_WRITE_REGISTER,
145 HARLEY_WRITE_OPERATION,
155 //---------------------------------------------------------------------------
156 // Function: ft1000_read_dpram32
158 // Parameters: ft1000_device - device structure
159 // indx - starting address to read
160 // buffer - data buffer to hold the data read
161 // cnt - number of byte read from DPRAM
163 // Returns: STATUS_SUCCESS - success
164 // STATUS_FAILURE - failure
166 // Description: This function read a number of bytes from DPRAM
170 //---------------------------------------------------------------------------
172 int ft1000_read_dpram32(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer,
175 int ret = STATUS_SUCCESS;
177 ret = ft1000_control(ft1000dev,
178 usb_rcvctrlpipe(ft1000dev->dev, 0),
179 HARLEY_READ_DPRAM_32,
180 HARLEY_READ_OPERATION,
190 //---------------------------------------------------------------------------
191 // Function: ft1000_write_dpram32
193 // Parameters: ft1000_device - device structure
194 // indx - starting address to write the data
195 // buffer - data buffer to write into DPRAM
196 // cnt - number of bytes to write
198 // Returns: STATUS_SUCCESS - success
199 // STATUS_FAILURE - failure
201 // Description: This function writes into DPRAM a number of bytes
205 //---------------------------------------------------------------------------
206 int ft1000_write_dpram32(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer,
209 int ret = STATUS_SUCCESS;
212 cnt += cnt - (cnt % 4);
214 ret = ft1000_control(ft1000dev,
215 usb_sndctrlpipe(ft1000dev->dev, 0),
216 HARLEY_WRITE_DPRAM_32,
217 HARLEY_WRITE_OPERATION,
227 //---------------------------------------------------------------------------
228 // Function: ft1000_read_dpram16
230 // Parameters: ft1000_device - device structure
231 // indx - starting address to read
232 // buffer - data buffer to hold the data read
233 // hightlow - high or low 16 bit word
235 // Returns: STATUS_SUCCESS - success
236 // STATUS_FAILURE - failure
238 // Description: This function read 16 bits from DPRAM
242 //---------------------------------------------------------------------------
243 int ft1000_read_dpram16(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer,
246 int ret = STATUS_SUCCESS;
250 request = HARLEY_READ_DPRAM_LOW;
252 request = HARLEY_READ_DPRAM_HIGH;
254 ret = ft1000_control(ft1000dev,
255 usb_rcvctrlpipe(ft1000dev->dev, 0),
257 HARLEY_READ_OPERATION,
267 //---------------------------------------------------------------------------
268 // Function: ft1000_write_dpram16
270 // Parameters: ft1000_device - device structure
271 // indx - starting address to write the data
272 // value - 16bits value to write
273 // hightlow - high or low 16 bit word
275 // Returns: STATUS_SUCCESS - success
276 // STATUS_FAILURE - failure
278 // Description: This function writes into DPRAM a number of bytes
282 //---------------------------------------------------------------------------
283 int ft1000_write_dpram16(struct ft1000_device *ft1000dev, u16 indx, u16 value, u8 highlow)
285 int ret = STATUS_SUCCESS;
289 request = HARLEY_WRITE_DPRAM_LOW;
291 request = HARLEY_WRITE_DPRAM_HIGH;
293 ret = ft1000_control(ft1000dev,
294 usb_sndctrlpipe(ft1000dev->dev, 0),
296 HARLEY_WRITE_OPERATION,
306 //---------------------------------------------------------------------------
307 // Function: fix_ft1000_read_dpram32
309 // Parameters: ft1000_device - device structure
310 // indx - starting address to read
311 // buffer - data buffer to hold the data read
314 // Returns: STATUS_SUCCESS - success
315 // STATUS_FAILURE - failure
317 // Description: This function read DPRAM 4 words at a time
321 //---------------------------------------------------------------------------
322 int fix_ft1000_read_dpram32(struct ft1000_device *ft1000dev, u16 indx,
327 int ret = STATUS_SUCCESS;
329 pos = (indx / 4) * 4;
330 ret = ft1000_read_dpram32(ft1000dev, pos, buf, 16);
332 if (ret == STATUS_SUCCESS) {
333 pos = (indx % 4) * 4;
334 *buffer++ = buf[pos++];
335 *buffer++ = buf[pos++];
336 *buffer++ = buf[pos++];
337 *buffer++ = buf[pos++];
339 DEBUG("fix_ft1000_read_dpram32: DPRAM32 Read failed\n");
350 //---------------------------------------------------------------------------
351 // Function: fix_ft1000_write_dpram32
353 // Parameters: ft1000_device - device structure
354 // indx - starting address to write
355 // buffer - data buffer to write
358 // Returns: STATUS_SUCCESS - success
359 // STATUS_FAILURE - failure
361 // Description: This function write to DPRAM 4 words at a time
365 //---------------------------------------------------------------------------
366 int fix_ft1000_write_dpram32(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer)
374 int ret = STATUS_SUCCESS;
376 pos1 = (indx / 4) * 4;
378 ret = ft1000_read_dpram32(ft1000dev, pos1, buf, 16);
380 if (ret == STATUS_SUCCESS) {
382 buf[pos2++] = *buffer++;
383 buf[pos2++] = *buffer++;
384 buf[pos2++] = *buffer++;
385 buf[pos2++] = *buffer++;
386 ret = ft1000_write_dpram32(ft1000dev, pos1, buf, 16);
388 DEBUG("fix_ft1000_write_dpram32: DPRAM32 Read failed\n");
392 ret = ft1000_read_dpram32(ft1000dev, pos1, (u8 *)&resultbuffer[0], 16);
394 if (ret == STATUS_SUCCESS) {
396 for (i = 0; i < 16; i++) {
397 if (buf[i] != resultbuffer[i])
398 ret = STATUS_FAILURE;
402 if (ret == STATUS_FAILURE) {
403 ret = ft1000_write_dpram32(ft1000dev, pos1,
404 (u8 *)&tempbuffer[0], 16);
405 ret = ft1000_read_dpram32(ft1000dev, pos1,
406 (u8 *)&resultbuffer[0], 16);
407 if (ret == STATUS_SUCCESS) {
409 for (i = 0; i < 16; i++) {
410 if (tempbuffer[i] != resultbuffer[i]) {
411 ret = STATUS_FAILURE;
412 DEBUG("%s Failed to write\n",
423 //------------------------------------------------------------------------
425 // Function: card_reset_dsp
427 // Synopsis: This function is called to reset or activate the DSP
429 // Arguments: value - reset or activate
432 //-----------------------------------------------------------------------
433 static void card_reset_dsp(struct ft1000_device *ft1000dev, bool value)
435 u16 status = STATUS_SUCCESS;
438 status = ft1000_write_register(ft1000dev, HOST_INTF_BE,
439 FT1000_REG_SUP_CTRL);
440 status = ft1000_read_register(ft1000dev, &tempword,
441 FT1000_REG_SUP_CTRL);
444 DEBUG("Reset DSP\n");
445 status = ft1000_read_register(ft1000dev, &tempword,
447 tempword |= DSP_RESET_BIT;
448 status = ft1000_write_register(ft1000dev, tempword,
451 DEBUG("Activate DSP\n");
452 status = ft1000_read_register(ft1000dev, &tempword,
454 tempword |= DSP_ENCRYPTED;
455 tempword &= ~DSP_UNENCRYPTED;
456 status = ft1000_write_register(ft1000dev, tempword,
458 status = ft1000_read_register(ft1000dev, &tempword,
460 tempword &= ~EFUSE_MEM_DISABLE;
461 tempword &= ~DSP_RESET_BIT;
462 status = ft1000_write_register(ft1000dev, tempword,
464 status = ft1000_read_register(ft1000dev, &tempword,
469 //---------------------------------------------------------------------------
470 // Function: card_send_command
472 // Parameters: ft1000_device - device structure
473 // ptempbuffer - command buffer
474 // size - command buffer size
476 // Returns: STATUS_SUCCESS - success
477 // STATUS_FAILURE - failure
479 // Description: This function sends a command to ASIC
483 //---------------------------------------------------------------------------
484 void card_send_command(struct ft1000_device *ft1000dev, void *ptempbuffer,
488 unsigned char *commandbuf;
490 DEBUG("card_send_command: enter card_send_command... size=%d\n", size);
492 commandbuf = (unsigned char *)kmalloc(size + 2, GFP_KERNEL);
493 memcpy((void *)commandbuf + 2, (void *)ptempbuffer, size);
495 //DEBUG("card_send_command: Command Send\n");
497 ft1000_read_register(ft1000dev, &temp, FT1000_REG_DOORBELL);
502 /* check for odd word */
505 /* Must force to be 32 bit aligned */
507 size += 4 - (size % 4);
509 //DEBUG("card_send_command: write dpram ... size=%d\n", size);
510 ft1000_write_dpram32(ft1000dev, 0, commandbuf, size);
512 //DEBUG("card_send_command: write into doorbell ...\n");
513 ft1000_write_register(ft1000dev, FT1000_DB_DPRAM_TX,
514 FT1000_REG_DOORBELL);
517 ft1000_read_register(ft1000dev, &temp, FT1000_REG_DOORBELL);
518 //DEBUG("card_send_command: read doorbell ...temp=%x\n", temp);
519 if ((temp & 0x0100) == 0) {
520 //DEBUG("card_send_command: Message sent\n");
525 //--------------------------------------------------------------------------
527 // Function: dsp_reload
529 // Synopsis: This function is called to load or reload the DSP
531 // Arguments: ft1000dev - device structure
534 //-----------------------------------------------------------------------
535 int dsp_reload(struct ft1000_device *ft1000dev)
541 struct ft1000_info *pft1000info;
543 pft1000info = netdev_priv(ft1000dev->net);
545 pft1000info->CardReady = 0;
547 /* Program Interrupt Mask register */
548 status = ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_SUP_IMASK);
550 status = ft1000_read_register(ft1000dev, &tempword, FT1000_REG_RESET);
551 tempword |= ASIC_RESET_BIT;
552 status = ft1000_write_register(ft1000dev, tempword, FT1000_REG_RESET);
554 status = ft1000_read_register(ft1000dev, &tempword, FT1000_REG_RESET);
555 DEBUG("Reset Register = 0x%x\n", tempword);
557 /* Toggle DSP reset */
558 card_reset_dsp(ft1000dev, 1);
560 card_reset_dsp(ft1000dev, 0);
564 ft1000_write_register(ft1000dev, HOST_INTF_BE, FT1000_REG_SUP_CTRL);
566 /* Let's check for FEFE */
568 ft1000_read_dpram32(ft1000dev, FT1000_MAG_DPRAM_FEFE_INDX,
569 (u8 *) &templong, 4);
570 DEBUG("templong (fefe) = 0x%8x\n", templong);
572 /* call codeloader */
573 status = scram_dnldr(ft1000dev, pFileStart, FileLength);
575 if (status != STATUS_SUCCESS)
580 DEBUG("dsp_reload returned\n");
585 //---------------------------------------------------------------------------
587 // Function: ft1000_reset_asic
588 // Descripton: This function will call the Card Service function to reset the
591 // dev - device structure
595 //---------------------------------------------------------------------------
596 static void ft1000_reset_asic(struct net_device *dev)
598 struct ft1000_info *info = netdev_priv(dev);
599 struct ft1000_device *ft1000dev = info->pFt1000Dev;
602 DEBUG("ft1000_hw:ft1000_reset_asic called\n");
604 info->ASICResetNum++;
606 /* Let's use the register provided by the Magnemite ASIC to reset the
609 ft1000_write_register(ft1000dev, (DSP_RESET_BIT | ASIC_RESET_BIT),
614 /* set watermark to -1 in order to not generate an interrrupt */
615 ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
617 /* clear interrupts */
618 ft1000_read_register(ft1000dev, &tempword, FT1000_REG_SUP_ISR);
619 DEBUG("ft1000_hw: interrupt status register = 0x%x\n", tempword);
620 ft1000_write_register(ft1000dev, tempword, FT1000_REG_SUP_ISR);
621 ft1000_read_register(ft1000dev, &tempword, FT1000_REG_SUP_ISR);
622 DEBUG("ft1000_hw: interrupt status register = 0x%x\n", tempword);
626 //---------------------------------------------------------------------------
628 // Function: ft1000_reset_card
629 // Descripton: This function will reset the card
631 // dev - device structure
633 // status - FALSE (card reset fail)
634 // TRUE (card reset successful)
636 //---------------------------------------------------------------------------
637 static int ft1000_reset_card(struct net_device *dev)
639 struct ft1000_info *info = netdev_priv(dev);
640 struct ft1000_device *ft1000dev = info->pFt1000Dev;
642 struct prov_record *ptr;
644 DEBUG("ft1000_hw:ft1000_reset_card called.....\n");
646 info->fCondResetPend = 1;
648 info->fProvComplete = 0;
650 /* Make sure we free any memory reserve for provisioning */
651 while (list_empty(&info->prov_list) == 0) {
652 DEBUG("ft1000_reset_card:deleting provisioning record\n");
654 list_entry(info->prov_list.next, struct prov_record, list);
655 list_del(&ptr->list);
656 kfree(ptr->pprov_data);
660 DEBUG("ft1000_hw:ft1000_reset_card: reset asic\n");
661 ft1000_reset_asic(dev);
665 DEBUG("ft1000_hw:ft1000_reset_card: call dsp_reload\n");
666 dsp_reload(ft1000dev);
668 DEBUG("dsp reload successful\n");
672 /* Initialize DSP heartbeat area */
673 ft1000_write_dpram16(ft1000dev, FT1000_MAG_HI_HO, ho_mag,
674 FT1000_MAG_HI_HO_INDX);
675 ft1000_read_dpram16(ft1000dev, FT1000_MAG_HI_HO, (u8 *) &tempword,
676 FT1000_MAG_HI_HO_INDX);
677 DEBUG("ft1000_hw:ft1000_reset_card:hi_ho value = 0x%x\n", tempword);
681 info->fCondResetPend = 0;
688 #ifdef HAVE_NET_DEVICE_OPS
689 static const struct net_device_ops ftnet_ops =
691 .ndo_open = &ft1000_open,
692 .ndo_stop = &ft1000_close,
693 .ndo_start_xmit = &ft1000_start_xmit,
694 .ndo_get_stats = &ft1000_netdev_stats,
699 //---------------------------------------------------------------------------
700 // Function: init_ft1000_netdev
702 // Parameters: ft1000dev - device structure
705 // Returns: STATUS_SUCCESS - success
706 // STATUS_FAILURE - failure
708 // Description: This function initialize the network device
712 //---------------------------------------------------------------------------
713 int init_ft1000_netdev(struct ft1000_device *ft1000dev)
715 struct net_device *netdev;
716 struct ft1000_info *pInfo = NULL;
717 struct dpram_blk *pdpram_blk;
719 struct list_head *cur, *tmp;
721 unsigned long gCardIndex = 0;
723 DEBUG("Enter init_ft1000_netdev...\n");
725 netdev = alloc_etherdev(sizeof(struct ft1000_info));
727 DEBUG("init_ft1000_netdev: can not allocate network device\n");
731 pInfo = netdev_priv(netdev);
733 memset(pInfo, 0, sizeof(struct ft1000_info));
735 dev_alloc_name(netdev, netdev->name);
737 DEBUG("init_ft1000_netdev: network device name is %s\n", netdev->name);
739 if (strncmp(netdev->name, "eth", 3) == 0) {
740 card_nr[0] = netdev->name[3];
742 ret_val = strict_strtoul(card_nr, 10, &gCardIndex);
744 printk(KERN_ERR "Can't parse netdev\n");
748 pInfo->CardNumber = gCardIndex;
749 DEBUG("card number = %d\n", pInfo->CardNumber);
751 printk(KERN_ERR "ft1000: Invalid device name\n");
756 memset(&pInfo->stats, 0, sizeof(struct net_device_stats));
758 spin_lock_init(&pInfo->dpram_lock);
759 pInfo->pFt1000Dev = ft1000dev;
760 pInfo->DrvErrNum = 0;
761 pInfo->ASICResetNum = 0;
762 pInfo->registered = 1;
763 pInfo->ft1000_reset = ft1000_reset;
764 pInfo->mediastate = 0;
766 pInfo->DeviceCreated = FALSE;
767 pInfo->CurrentInterruptEnableMask = ISR_DEFAULT_MASK;
768 pInfo->InterruptsEnabled = FALSE;
769 pInfo->CardReady = 0;
770 pInfo->DSP_TIME[0] = 0;
771 pInfo->DSP_TIME[1] = 0;
772 pInfo->DSP_TIME[2] = 0;
773 pInfo->DSP_TIME[3] = 0;
774 pInfo->fAppMsgPend = 0;
775 pInfo->fCondResetPend = 0;
778 memset(&pInfo->tempbuf[0], 0, sizeof(pInfo->tempbuf));
780 INIT_LIST_HEAD(&pInfo->prov_list);
782 INIT_LIST_HEAD(&pInfo->nodes.list);
784 #ifdef HAVE_NET_DEVICE_OPS
785 netdev->netdev_ops = &ftnet_ops;
787 netdev->hard_start_xmit = &ft1000_start_xmit;
788 netdev->get_stats = &ft1000_netdev_stats;
789 netdev->open = &ft1000_open;
790 netdev->stop = &ft1000_close;
793 ft1000dev->net = netdev;
795 DEBUG("Initialize free_buff_lock and freercvpool\n");
796 spin_lock_init(&free_buff_lock);
798 /* initialize a list of buffers to be use for queuing
799 * up receive command data
801 INIT_LIST_HEAD(&freercvpool);
803 /* create list of free buffers */
804 for (i = 0; i < NUM_OF_FREE_BUFFERS; i++) {
805 /* Get memory for DPRAM_DATA link list */
806 pdpram_blk = kmalloc(sizeof(struct dpram_blk), GFP_KERNEL);
807 if (pdpram_blk == NULL) {
811 /* Get a block of memory to store command data */
812 pdpram_blk->pbuffer = kmalloc(MAX_CMD_SQSIZE, GFP_KERNEL);
813 if (pdpram_blk->pbuffer == NULL) {
818 /* link provisioning data */
819 list_add_tail(&pdpram_blk->list, &freercvpool);
821 numofmsgbuf = NUM_OF_FREE_BUFFERS;
826 list_for_each_safe(cur, tmp, &freercvpool) {
827 pdpram_blk = list_entry(cur, struct dpram_blk, list);
828 list_del(&pdpram_blk->list);
829 kfree(pdpram_blk->pbuffer);
837 //---------------------------------------------------------------------------
838 // Function: reg_ft1000_netdev
840 // Parameters: ft1000dev - device structure
843 // Returns: STATUS_SUCCESS - success
844 // STATUS_FAILURE - failure
846 // Description: This function register the network driver
850 //---------------------------------------------------------------------------
851 int reg_ft1000_netdev(struct ft1000_device *ft1000dev,
852 struct usb_interface *intf)
854 struct net_device *netdev;
855 struct ft1000_info *pInfo;
858 netdev = ft1000dev->net;
859 pInfo = netdev_priv(ft1000dev->net);
860 DEBUG("Enter reg_ft1000_netdev...\n");
862 ft1000_read_register(ft1000dev, &pInfo->AsicID, FT1000_REG_ASIC_ID);
864 usb_set_intfdata(intf, pInfo);
865 SET_NETDEV_DEV(netdev, &intf->dev);
867 rc = register_netdev(netdev);
869 DEBUG("reg_ft1000_netdev: could not register network device\n");
874 ft1000_create_dev(ft1000dev);
876 DEBUG("reg_ft1000_netdev returned\n");
878 pInfo->CardReady = 1;
883 static int ft1000_reset(struct net_device *dev)
885 ft1000_reset_card(dev);
889 //---------------------------------------------------------------------------
890 // Function: ft1000_usb_transmit_complete
892 // Parameters: urb - transmitted usb urb
897 // Description: This is the callback function when a urb is transmitted
901 //---------------------------------------------------------------------------
902 static void ft1000_usb_transmit_complete(struct urb *urb)
905 struct ft1000_device *ft1000dev = urb->context;
907 //DEBUG("ft1000_usb_transmit_complete entered\n");
910 printk("%s: TX status %d\n", ft1000dev->net->name, urb->status);
912 netif_wake_queue(ft1000dev->net);
914 //DEBUG("Return from ft1000_usb_transmit_complete\n");
917 //---------------------------------------------------------------------------
919 // Function: ft1000_copy_down_pkt
920 // Descripton: This function will take an ethernet packet and convert it to
921 // a Flarion packet prior to sending it to the ASIC Downlink
924 // dev - device structure
925 // packet - address of ethernet packet
926 // len - length of IP packet
931 //---------------------------------------------------------------------------
932 static int ft1000_copy_down_pkt (struct net_device *netdev, u8 *packet, u16 len)
934 struct ft1000_info *pInfo = netdev_priv(netdev);
935 struct ft1000_device *pFt1000Dev = pInfo->pFt1000Dev;
940 struct pseudo_hdr hdr;
942 if (!pInfo->CardReady)
945 DEBUG("ft1000_copy_down_pkt::Card Not Ready\n");
951 //DEBUG("ft1000_copy_down_pkt() entered, len = %d\n", len);
953 count = sizeof(struct pseudo_hdr) + len;
954 if(count > MAX_BUF_SIZE)
956 DEBUG("Error:ft1000_copy_down_pkt:Message Size Overflow!\n");
957 DEBUG("size = %d\n", count);
962 count = count + (4- (count %4) );
964 memset(&hdr, 0, sizeof(struct pseudo_hdr));
966 hdr.length = ntohs(count);
968 hdr.destination = 0x20;
971 hdr.sh_str_id = 0x91;
974 hdr.checksum = hdr.length ^ hdr.source ^ hdr.destination ^
975 hdr.portdest ^ hdr.portsrc ^ hdr.sh_str_id ^
978 memcpy(&pFt1000Dev->tx_buf[0], &hdr, sizeof(hdr));
979 memcpy(&(pFt1000Dev->tx_buf[sizeof(struct pseudo_hdr)]), packet, len);
981 netif_stop_queue(netdev);
983 //DEBUG ("ft1000_copy_down_pkt: count = %d\n", count);
985 usb_fill_bulk_urb(pFt1000Dev->tx_urb,
987 usb_sndbulkpipe(pFt1000Dev->dev, pFt1000Dev->bulk_out_endpointAddr),
990 ft1000_usb_transmit_complete,
993 t = (u8 *)pFt1000Dev->tx_urb->transfer_buffer;
994 //DEBUG("transfer_length=%d\n", pFt1000Dev->tx_urb->transfer_buffer_length);
995 /*for (i=0; i<count; i++ )
1001 ret = usb_submit_urb(pFt1000Dev->tx_urb, GFP_ATOMIC);
1003 DEBUG("ft1000 failed tx_urb %d\n", ret);
1006 pInfo->stats.tx_packets++;
1007 pInfo->stats.tx_bytes += (len+14);
1010 //DEBUG("ft1000_copy_down_pkt() exit\n");
1015 //---------------------------------------------------------------------------
1016 // Function: ft1000_start_xmit
1018 // Parameters: skb - socket buffer to be sent
1019 // dev - network device
1024 // Description: transmit a ethernet packet
1028 //---------------------------------------------------------------------------
1029 static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
1031 struct ft1000_info *pInfo = netdev_priv(dev);
1032 struct ft1000_device *pFt1000Dev= pInfo->pFt1000Dev;
1037 //DEBUG(" ft1000_start_xmit() entered\n");
1041 DEBUG ("ft1000_hw: ft1000_start_xmit:skb == NULL!!!\n" );
1042 return NETDEV_TX_OK;
1045 if ( pFt1000Dev->status & FT1000_STATUS_CLOSING)
1047 DEBUG("network driver is closed, return\n");
1051 //DEBUG("ft1000_start_xmit 1:length of packet = %d\n", skb->len);
1052 pipe = usb_sndbulkpipe(pFt1000Dev->dev, pFt1000Dev->bulk_out_endpointAddr);
1053 maxlen = usb_maxpacket(pFt1000Dev->dev, pipe, usb_pipeout(pipe));
1054 //DEBUG("ft1000_start_xmit 2: pipe=%d dev->maxpacket = %d\n", pipe, maxlen);
1056 pdata = (u8 *)skb->data;
1057 /*for (i=0; i<skb->len; i++)
1058 DEBUG("skb->data[%d]=%x ", i, *(skb->data+i));
1063 if (pInfo->mediastate == 0)
1065 /* Drop packet is mediastate is down */
1066 DEBUG("ft1000_hw:ft1000_start_xmit:mediastate is down\n");
1070 if ( (skb->len < ENET_HEADER_SIZE) || (skb->len > ENET_MAX_SIZE) )
1072 /* Drop packet which has invalid size */
1073 DEBUG("ft1000_hw:ft1000_start_xmit:invalid ethernet length\n");
1077 ft1000_copy_down_pkt(dev, (pdata+ENET_HEADER_SIZE-2),
1078 skb->len - ENET_HEADER_SIZE + 2);
1082 //DEBUG(" ft1000_start_xmit() exit\n");
1084 return NETDEV_TX_OK;
1087 //---------------------------------------------------------------------------
1089 // Function: ft1000_copy_up_pkt
1090 // Descripton: This function will take a packet from the FIFO up link and
1091 // convert it into an ethernet packet and deliver it to the IP stack
1093 // urb - the receving usb urb
1099 //---------------------------------------------------------------------------
1100 static int ft1000_copy_up_pkt (struct urb *urb)
1102 struct ft1000_info *info = urb->context;
1103 struct ft1000_device *ft1000dev = info->pFt1000Dev;
1104 struct net_device *net = ft1000dev->net;
1109 struct sk_buff *skb;
1116 //DEBUG("ft1000_copy_up_pkt entered\n");
1118 if ( ft1000dev->status & FT1000_STATUS_CLOSING)
1120 DEBUG("network driver is closed, return\n");
1121 return STATUS_SUCCESS;
1125 len = urb->transfer_buffer_length;
1126 lena = urb->actual_length; //mbelian
1127 //DEBUG("ft1000_copy_up_pkt: transfer_buffer_length=%d, actual_buffer_len=%d\n",
1128 // urb->transfer_buffer_length, urb->actual_length);
1130 chksum = (u16 *)ft1000dev->rx_buf;
1132 tempword = *chksum++;
1135 tempword ^= *chksum++;
1138 if (tempword != *chksum)
1140 info->stats.rx_errors ++;
1141 ft1000_submit_rx_urb(info);
1142 return STATUS_FAILURE;
1146 //DEBUG("ft1000_copy_up_pkt: checksum is correct %x\n", *chksum);
1148 skb = dev_alloc_skb(len+12+2);
1152 DEBUG("ft1000_copy_up_pkt: No Network buffers available\n");
1153 info->stats.rx_errors++;
1154 ft1000_submit_rx_urb(info);
1155 return STATUS_FAILURE;
1158 pbuffer = (u8 *)skb_put(skb, len+12);
1160 //subtract the number of bytes read already
1164 *pbuffer++ = net->dev_addr[0];
1165 *pbuffer++ = net->dev_addr[1];
1166 *pbuffer++ = net->dev_addr[2];
1167 *pbuffer++ = net->dev_addr[3];
1168 *pbuffer++ = net->dev_addr[4];
1169 *pbuffer++ = net->dev_addr[5];
1180 memcpy(pbuffer, ft1000dev->rx_buf+sizeof(struct pseudo_hdr), len-sizeof(struct pseudo_hdr));
1182 //DEBUG("ft1000_copy_up_pkt: Data passed to Protocol layer\n");
1183 /*for (i=0; i<len+12; i++)
1185 DEBUG("ft1000_copy_up_pkt: Protocol Data: 0x%x\n ", *ptemp++);
1190 skb->protocol = eth_type_trans(skb, net);
1191 skb->ip_summed = CHECKSUM_UNNECESSARY;
1194 info->stats.rx_packets++;
1195 // Add on 12 bytes for MAC address which was removed
1196 info->stats.rx_bytes += (lena+12); //mbelian
1198 ft1000_submit_rx_urb(info);
1199 //DEBUG("ft1000_copy_up_pkt exited\n");
1203 //---------------------------------------------------------------------------
1205 // Function: ft1000_submit_rx_urb
1206 // Descripton: the receiving function of the network driver
1209 // info - a private structure contains the device information
1215 //---------------------------------------------------------------------------
1216 static int ft1000_submit_rx_urb(struct ft1000_info *info)
1219 struct ft1000_device *pFt1000Dev = info->pFt1000Dev;
1222 //DEBUG ("ft1000_submit_rx_urb entered: sizeof rx_urb is %d\n", sizeof(*pFt1000Dev->rx_urb));
1223 if ( pFt1000Dev->status & FT1000_STATUS_CLOSING)
1225 DEBUG("network driver is closed, return\n");
1226 //usb_kill_urb(pFt1000Dev->rx_urb); //mbelian
1230 usb_fill_bulk_urb(pFt1000Dev->rx_urb,
1232 usb_rcvbulkpipe(pFt1000Dev->dev, pFt1000Dev->bulk_in_endpointAddr),
1235 (usb_complete_t)ft1000_copy_up_pkt,
1239 if((result = usb_submit_urb(pFt1000Dev->rx_urb, GFP_ATOMIC)))
1241 printk("ft1000_submit_rx_urb: submitting rx_urb %d failed\n", result);
1245 //DEBUG("ft1000_submit_rx_urb exit: result=%d\n", result);
1250 //---------------------------------------------------------------------------
1251 // Function: ft1000_open
1254 // dev - network device
1259 // Description: open the network driver
1263 //---------------------------------------------------------------------------
1264 static int ft1000_open (struct net_device *dev)
1266 struct ft1000_info *pInfo = netdev_priv(dev);
1267 struct timeval tv; //mbelian
1270 DEBUG("ft1000_open is called for card %d\n", pInfo->CardNumber);
1271 //DEBUG("ft1000_open: dev->addr=%x, dev->addr_len=%d\n", dev->addr, dev->addr_len);
1273 pInfo->stats.rx_bytes = 0; //mbelian
1274 pInfo->stats.tx_bytes = 0; //mbelian
1275 pInfo->stats.rx_packets = 0; //mbelian
1276 pInfo->stats.tx_packets = 0; //mbelian
1277 do_gettimeofday(&tv);
1278 pInfo->ConTm = tv.tv_sec;
1279 pInfo->ProgConStat = 0; //mbelian
1282 netif_start_queue(dev);
1284 netif_carrier_on(dev); //mbelian
1286 ret = ft1000_submit_rx_urb(pInfo);
1291 //---------------------------------------------------------------------------
1292 // Function: ft1000_close
1295 // net - network device
1300 // Description: close the network driver
1304 //---------------------------------------------------------------------------
1305 int ft1000_close(struct net_device *net)
1307 struct ft1000_info *pInfo = netdev_priv(net);
1308 struct ft1000_device *ft1000dev = pInfo->pFt1000Dev;
1310 //DEBUG ("ft1000_close: netdev->refcnt=%d\n", net->refcnt);
1312 ft1000dev->status |= FT1000_STATUS_CLOSING;
1314 //DEBUG("ft1000_close: calling usb_kill_urb \n");
1316 DEBUG("ft1000_close: pInfo=%p, ft1000dev=%p\n", pInfo, ft1000dev);
1317 netif_carrier_off(net);//mbelian
1318 netif_stop_queue(net);
1319 //DEBUG("ft1000_close: netif_stop_queue called\n");
1320 ft1000dev->status &= ~FT1000_STATUS_CLOSING;
1322 pInfo->ProgConStat = 0xff; //mbelian
1328 static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev)
1330 struct ft1000_info *info = netdev_priv(dev);
1332 return &(info->stats); //mbelian
1336 /*********************************************************************************
1341 //---------------------------------------------------------------------------
1343 // Function: ft1000_chkcard
1344 // Descripton: This function will check if the device is presently available on
1347 // dev - device structure
1349 // status - FALSE (device is not present)
1350 // TRUE (device is present)
1352 //---------------------------------------------------------------------------
1353 static int ft1000_chkcard (struct ft1000_device *dev) {
1356 struct ft1000_info *info = netdev_priv(dev->net);
1358 if (info->fCondResetPend)
1360 DEBUG("ft1000_hw:ft1000_chkcard:Card is being reset, return FALSE\n");
1364 // Mask register is used to check for device presence since it is never
1366 status = ft1000_read_register(dev, &tempword, FT1000_REG_SUP_IMASK);
1367 //DEBUG("ft1000_hw:ft1000_chkcard: read FT1000_REG_SUP_IMASK = %x\n", tempword);
1368 if (tempword == 0) {
1369 DEBUG("ft1000_hw:ft1000_chkcard: IMASK = 0 Card not detected\n");
1373 // The system will return the value of 0xffff for the version register
1374 // if the device is not present.
1375 status = ft1000_read_register(dev, &tempword, FT1000_REG_ASIC_ID);
1376 //DEBUG("ft1000_hw:ft1000_chkcard: read FT1000_REG_ASIC_ID = %x\n", tempword);
1377 if (tempword != 0x1b01 ){
1378 dev->status |= FT1000_STATUS_CLOSING; //mbelian
1379 DEBUG("ft1000_hw:ft1000_chkcard: Version = 0xffff Card not detected\n");
1387 //---------------------------------------------------------------------------
1389 // Function: ft1000_receive_cmd
1390 // Descripton: This function will read a message from the dpram area.
1392 // dev - network device structure
1393 // pbuffer - caller supply address to buffer
1394 // pnxtph - pointer to next pseudo header
1396 // Status = 0 (unsuccessful)
1399 //---------------------------------------------------------------------------
1400 static bool ft1000_receive_cmd (struct ft1000_device *dev, u16 *pbuffer, int maxsz, u16 *pnxtph) {
1406 ret = ft1000_read_dpram16(dev, FT1000_MAG_PH_LEN, (u8 *)&size, FT1000_MAG_PH_LEN_INDX);
1407 size = ntohs(size) + PSEUDOSZ;
1409 DEBUG("FT1000:ft1000_receive_cmd:Invalid command length = %d\n", size);
1413 ppseudohdr = (u16 *)pbuffer;
1414 ft1000_write_register(dev, FT1000_DPRAM_MAG_RX_BASE, FT1000_REG_DPRAM_ADDR);
1415 ret = ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAH);
1416 //DEBUG("ft1000_hw:received data = 0x%x\n", *pbuffer);
1418 ft1000_write_register(dev, FT1000_DPRAM_MAG_RX_BASE+1, FT1000_REG_DPRAM_ADDR);
1419 for (i=0; i<=(size>>2); i++) {
1420 ret = ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAL);
1422 ret = ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAH);
1425 //copy odd aligned word
1426 ret = ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAL);
1427 //DEBUG("ft1000_hw:received data = 0x%x\n", *pbuffer);
1429 ret = ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAH);
1430 //DEBUG("ft1000_hw:received data = 0x%x\n", *pbuffer);
1432 if (size & 0x0001) {
1433 //copy odd byte from fifo
1434 ret = ft1000_read_register(dev, &tempword, FT1000_REG_DPRAM_DATA);
1435 *pbuffer = ntohs(tempword);
1438 // Check if pseudo header checksum is good
1439 // Calculate pseudo header checksum
1440 tempword = *ppseudohdr++;
1441 for (i=1; i<7; i++) {
1442 tempword ^= *ppseudohdr++;
1444 if ( (tempword != *ppseudohdr) ) {
1453 static int ft1000_dsp_prov(void *arg)
1455 struct ft1000_device *dev = (struct ft1000_device *)arg;
1456 struct ft1000_info *info = netdev_priv(dev->net);
1460 struct prov_record *ptr;
1461 struct pseudo_hdr *ppseudo_hdr;
1464 u16 TempShortBuf [256];
1466 DEBUG("*** DspProv Entered\n");
1468 while (list_empty(&info->prov_list) == 0)
1470 DEBUG("DSP Provisioning List Entry\n");
1472 // Check if doorbell is available
1473 DEBUG("check if doorbell is cleared\n");
1474 status = ft1000_read_register (dev, &tempword, FT1000_REG_DOORBELL);
1477 DEBUG("ft1000_dsp_prov::ft1000_read_register error\n");
1481 while (tempword & FT1000_DB_DPRAM_TX) {
1485 DEBUG("FT1000:ft1000_dsp_prov:message drop\n");
1486 return STATUS_FAILURE;
1488 ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
1491 if ( !(tempword & FT1000_DB_DPRAM_TX) ) {
1492 DEBUG("*** Provision Data Sent to DSP\n");
1494 // Send provisioning data
1495 ptr = list_entry(info->prov_list.next, struct prov_record, list);
1496 len = *(u16 *)ptr->pprov_data;
1500 pmsg = (u16 *)ptr->pprov_data;
1501 ppseudo_hdr = (struct pseudo_hdr *)pmsg;
1502 // Insert slow queue sequence number
1503 ppseudo_hdr->seq_num = info->squeseqnum++;
1504 ppseudo_hdr->portsrc = 0;
1505 // Calculate new checksum
1506 ppseudo_hdr->checksum = *pmsg++;
1507 //DEBUG("checksum = 0x%x\n", ppseudo_hdr->checksum);
1508 for (i=1; i<7; i++) {
1509 ppseudo_hdr->checksum ^= *pmsg++;
1510 //DEBUG("checksum = 0x%x\n", ppseudo_hdr->checksum);
1513 TempShortBuf[0] = 0;
1514 TempShortBuf[1] = htons (len);
1515 memcpy(&TempShortBuf[2], ppseudo_hdr, len);
1517 status = ft1000_write_dpram32 (dev, 0, (u8 *)&TempShortBuf[0], (unsigned short)(len+2));
1518 status = ft1000_write_register (dev, FT1000_DB_DPRAM_TX, FT1000_REG_DOORBELL);
1520 list_del(&ptr->list);
1521 kfree(ptr->pprov_data);
1527 DEBUG("DSP Provisioning List Entry finished\n");
1531 info->fProvComplete = 1;
1532 info->CardReady = 1;
1533 return STATUS_SUCCESS;
1538 static int ft1000_proc_drvmsg (struct ft1000_device *dev, u16 size) {
1539 struct ft1000_info *info = netdev_priv(dev->net);
1542 struct media_msg *pmediamsg;
1543 struct dsp_init_msg *pdspinitmsg;
1544 struct drv_msg *pdrvmsg;
1546 struct pseudo_hdr *ppseudo_hdr;
1555 char *cmdbuffer = kmalloc(1600, GFP_KERNEL);
1557 return STATUS_FAILURE;
1559 status = ft1000_read_dpram32(dev, 0x200, cmdbuffer, size);
1564 DEBUG("ft1000_proc_drvmsg:cmdbuffer\n");
1565 for(i = 0; i < size; i+=5)
1567 if( (i + 5) < size )
1568 DEBUG("0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", cmdbuffer[i], cmdbuffer[i+1], cmdbuffer[i+2], cmdbuffer[i+3], cmdbuffer[i+4]);
1571 for (j = i; j < size; j++)
1572 DEBUG("0x%x ", cmdbuffer[j]);
1578 pdrvmsg = (struct drv_msg *)&cmdbuffer[2];
1579 msgtype = ntohs(pdrvmsg->type);
1580 DEBUG("ft1000_proc_drvmsg:Command message type = 0x%x\n", msgtype);
1583 DEBUG("ft1000_proc_drvmsg:Command message type = MEDIA_STATE");
1585 pmediamsg = (struct media_msg *)&cmdbuffer[0];
1586 if (info->ProgConStat != 0xFF) {
1587 if (pmediamsg->state) {
1588 DEBUG("Media is up\n");
1589 if (info->mediastate == 0) {
1590 if ( info->NetDevRegDone )
1592 //netif_carrier_on(dev->net);//mbelian
1593 netif_wake_queue(dev->net);
1595 info->mediastate = 1;
1596 /*do_gettimeofday(&tv);
1597 info->ConTm = tv.tv_sec;*/ //mbelian
1601 DEBUG("Media is down\n");
1602 if (info->mediastate == 1) {
1603 info->mediastate = 0;
1604 if ( info->NetDevRegDone )
1606 //netif_carrier_off(dev->net); mbelian
1607 //netif_stop_queue(dev->net);
1614 DEBUG("Media is down\n");
1615 if (info->mediastate == 1) {
1616 info->mediastate = 0;
1617 if ( info->NetDevRegDone)
1619 //netif_carrier_off(dev->net); //mbelian
1620 //netif_stop_queue(dev->net);
1627 case DSP_INIT_MSG: {
1628 DEBUG("ft1000_proc_drvmsg:Command message type = DSP_INIT_MSG");
1630 pdspinitmsg = (struct dsp_init_msg *)&cmdbuffer[2];
1631 memcpy(info->DspVer, pdspinitmsg->DspVer, DSPVERSZ);
1632 DEBUG("DSPVER = 0x%2x 0x%2x 0x%2x 0x%2x\n", info->DspVer[0], info->DspVer[1], info->DspVer[2], info->DspVer[3]);
1633 memcpy(info->HwSerNum, pdspinitmsg->HwSerNum, HWSERNUMSZ);
1634 memcpy(info->Sku, pdspinitmsg->Sku, SKUSZ);
1635 memcpy(info->eui64, pdspinitmsg->eui64, EUISZ);
1636 DEBUG("EUI64=%2x.%2x.%2x.%2x.%2x.%2x.%2x.%2x\n", info->eui64[0],info->eui64[1], info->eui64[2], info->eui64[3], info->eui64[4], info->eui64[5],info->eui64[6], info->eui64[7]);
1637 dev->net->dev_addr[0] = info->eui64[0];
1638 dev->net->dev_addr[1] = info->eui64[1];
1639 dev->net->dev_addr[2] = info->eui64[2];
1640 dev->net->dev_addr[3] = info->eui64[5];
1641 dev->net->dev_addr[4] = info->eui64[6];
1642 dev->net->dev_addr[5] = info->eui64[7];
1644 if (ntohs(pdspinitmsg->length) == (sizeof(struct dsp_init_msg) - 20)) {
1645 memcpy(info->ProductMode, pdspinitmsg->ProductMode, MODESZ);
1646 memcpy(info->RfCalVer, pdspinitmsg->RfCalVer, CALVERSZ);
1647 memcpy(info->RfCalDate, pdspinitmsg->RfCalDate, CALDATESZ);
1648 DEBUG("RFCalVer = 0x%2x 0x%2x\n", info->RfCalVer[0], info->RfCalVer[1]);
1652 case DSP_PROVISION: {
1653 DEBUG("ft1000_proc_drvmsg:Command message type = DSP_PROVISION\n");
1655 // kick off dspprov routine to start provisioning
1656 // Send provisioning data to DSP
1657 if (list_empty(&info->prov_list) == 0)
1659 info->fProvComplete = 0;
1660 status = ft1000_dsp_prov(dev);
1661 if (status != STATUS_SUCCESS)
1665 info->fProvComplete = 1;
1666 status = ft1000_write_register (dev, FT1000_DB_HB, FT1000_REG_DOORBELL);
1667 DEBUG("FT1000:drivermsg:No more DSP provisioning data in dsp image\n");
1669 DEBUG("ft1000_proc_drvmsg:DSP PROVISION is done\n");
1672 case DSP_STORE_INFO: {
1673 DEBUG("ft1000_proc_drvmsg:Command message type = DSP_STORE_INFO");
1675 DEBUG("FT1000:drivermsg:Got DSP_STORE_INFO\n");
1676 tempword = ntohs(pdrvmsg->length);
1677 info->DSPInfoBlklen = tempword;
1678 if (tempword < (MAX_DSP_SESS_REC-4) ) {
1679 pmsg = (u16 *)&pdrvmsg->data[0];
1680 for (i=0; i<((tempword+1)/2); i++) {
1681 DEBUG("FT1000:drivermsg:dsp info data = 0x%x\n", *pmsg);
1682 info->DSPInfoBlk[i+10] = *pmsg++;
1686 info->DSPInfoBlklen = 0;
1690 case DSP_GET_INFO: {
1691 DEBUG("FT1000:drivermsg:Got DSP_GET_INFO\n");
1692 // copy dsp info block to dsp
1693 info->DrvMsgPend = 1;
1694 // allow any outstanding ioctl to finish
1696 status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
1697 if (tempword & FT1000_DB_DPRAM_TX) {
1699 status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
1700 if (tempword & FT1000_DB_DPRAM_TX) {
1702 status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
1703 if (tempword & FT1000_DB_DPRAM_TX) {
1709 // Put message into Slow Queue
1710 // Form Pseudo header
1711 pmsg = (u16 *)info->DSPInfoBlk;
1713 *pmsg++ = htons(info->DSPInfoBlklen+20+info->DSPInfoBlklen);
1714 ppseudo_hdr = (struct pseudo_hdr *)(u16 *)&info->DSPInfoBlk[2];
1715 ppseudo_hdr->length = htons(info->DSPInfoBlklen+4+info->DSPInfoBlklen);
1716 ppseudo_hdr->source = 0x10;
1717 ppseudo_hdr->destination = 0x20;
1718 ppseudo_hdr->portdest = 0;
1719 ppseudo_hdr->portsrc = 0;
1720 ppseudo_hdr->sh_str_id = 0;
1721 ppseudo_hdr->control = 0;
1722 ppseudo_hdr->rsvd1 = 0;
1723 ppseudo_hdr->rsvd2 = 0;
1724 ppseudo_hdr->qos_class = 0;
1725 // Insert slow queue sequence number
1726 ppseudo_hdr->seq_num = info->squeseqnum++;
1727 // Insert application id
1728 ppseudo_hdr->portsrc = 0;
1729 // Calculate new checksum
1730 ppseudo_hdr->checksum = *pmsg++;
1731 for (i=1; i<7; i++) {
1732 ppseudo_hdr->checksum ^= *pmsg++;
1734 info->DSPInfoBlk[10] = 0x7200;
1735 info->DSPInfoBlk[11] = htons(info->DSPInfoBlklen);
1736 status = ft1000_write_dpram32 (dev, 0, (u8 *)&info->DSPInfoBlk[0], (unsigned short)(info->DSPInfoBlklen+22));
1737 status = ft1000_write_register (dev, FT1000_DB_DPRAM_TX, FT1000_REG_DOORBELL);
1738 info->DrvMsgPend = 0;
1743 case GET_DRV_ERR_RPT_MSG: {
1744 DEBUG("FT1000:drivermsg:Got GET_DRV_ERR_RPT_MSG\n");
1745 // copy driver error message to dsp
1746 info->DrvMsgPend = 1;
1747 // allow any outstanding ioctl to finish
1749 status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
1750 if (tempword & FT1000_DB_DPRAM_TX) {
1752 status = ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
1753 if (tempword & FT1000_DB_DPRAM_TX) {
1758 if ( (tempword & FT1000_DB_DPRAM_TX) == 0) {
1759 // Put message into Slow Queue
1760 // Form Pseudo header
1761 pmsg = (u16 *)&tempbuffer[0];
1762 ppseudo_hdr = (struct pseudo_hdr *)pmsg;
1763 ppseudo_hdr->length = htons(0x0012);
1764 ppseudo_hdr->source = 0x10;
1765 ppseudo_hdr->destination = 0x20;
1766 ppseudo_hdr->portdest = 0;
1767 ppseudo_hdr->portsrc = 0;
1768 ppseudo_hdr->sh_str_id = 0;
1769 ppseudo_hdr->control = 0;
1770 ppseudo_hdr->rsvd1 = 0;
1771 ppseudo_hdr->rsvd2 = 0;
1772 ppseudo_hdr->qos_class = 0;
1773 // Insert slow queue sequence number
1774 ppseudo_hdr->seq_num = info->squeseqnum++;
1775 // Insert application id
1776 ppseudo_hdr->portsrc = 0;
1777 // Calculate new checksum
1778 ppseudo_hdr->checksum = *pmsg++;
1779 for (i=1; i<7; i++) {
1780 ppseudo_hdr->checksum ^= *pmsg++;
1782 pmsg = (u16 *)&tempbuffer[16];
1783 *pmsg++ = htons(RSP_DRV_ERR_RPT_MSG);
1784 *pmsg++ = htons(0x000e);
1785 *pmsg++ = htons(info->DSP_TIME[0]);
1786 *pmsg++ = htons(info->DSP_TIME[1]);
1787 *pmsg++ = htons(info->DSP_TIME[2]);
1788 *pmsg++ = htons(info->DSP_TIME[3]);
1789 convert.byte[0] = info->DspVer[0];
1790 convert.byte[1] = info->DspVer[1];
1791 *pmsg++ = convert.wrd;
1792 convert.byte[0] = info->DspVer[2];
1793 convert.byte[1] = info->DspVer[3];
1794 *pmsg++ = convert.wrd;
1795 *pmsg++ = htons(info->DrvErrNum);
1797 card_send_command (dev, (unsigned char*)&tempbuffer[0], (u16)(0x0012 + PSEUDOSZ));
1798 info->DrvErrNum = 0;
1800 info->DrvMsgPend = 0;
1810 status = STATUS_SUCCESS;
1813 DEBUG("return from ft1000_proc_drvmsg\n");
1819 int ft1000_poll(void* dev_id) {
1821 struct ft1000_device *dev = (struct ft1000_device *)dev_id;
1822 struct ft1000_info *info = netdev_priv(dev->net);
1832 struct dpram_blk *pdpram_blk;
1833 struct pseudo_hdr *ppseudo_hdr;
1834 unsigned long flags;
1836 //DEBUG("Enter ft1000_poll...\n");
1837 if (ft1000_chkcard(dev) == FALSE) {
1838 DEBUG("ft1000_poll::ft1000_chkcard: failed\n");
1839 return STATUS_FAILURE;
1842 status = ft1000_read_register (dev, &tempword, FT1000_REG_DOORBELL);
1843 // DEBUG("ft1000_poll: read FT1000_REG_DOORBELL message 0x%x\n", tempword);
1848 if (tempword & FT1000_DB_DPRAM_RX) {
1849 //DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_DPRAM_RX\n");
1851 status = ft1000_read_dpram16(dev, 0x200, (u8 *)&data, 0);
1852 //DEBUG("ft1000_poll:FT1000_DB_DPRAM_RX:ft1000_read_dpram16:size = 0x%x\n", data);
1853 size = ntohs(data) + 16 + 2; //wai
1855 modulo = 4 - (size % 4);
1856 size = size + modulo;
1858 status = ft1000_read_dpram16(dev, 0x201, (u8 *)&portid, 1);
1860 //DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_DPRAM_RX : portid 0x%x\n", portid);
1862 if (size < MAX_CMD_SQSIZE) {
1866 DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_DPRAM_RX : portid DRIVERID\n");
1868 status = ft1000_proc_drvmsg (dev, size);
1869 if (status != STATUS_SUCCESS )
1873 // This is a dsp broadcast message
1874 // Check which application has registered for dsp broadcast messages
1875 //DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_DPRAM_RX : portid DSPBCMSGID\n");
1877 for (i=0; i<MAX_NUM_APP; i++) {
1878 if ( (info->app_info[i].DspBCMsgFlag) && (info->app_info[i].fileobject) &&
1879 (info->app_info[i].NumOfMsg < MAX_MSG_LIMIT) )
1881 //DEBUG("Dsp broadcast message detected for app id %d\n", i);
1882 nxtph = FT1000_DPRAM_RX_BASE + 2;
1883 pdpram_blk = ft1000_get_buffer (&freercvpool);
1884 if (pdpram_blk != NULL) {
1885 if ( ft1000_receive_cmd(dev, pdpram_blk->pbuffer, MAX_CMD_SQSIZE, &nxtph) ) {
1886 ppseudo_hdr = (struct pseudo_hdr *)pdpram_blk->pbuffer;
1887 // Put message into the appropriate application block
1888 info->app_info[i].nRxMsg++;
1889 spin_lock_irqsave(&free_buff_lock, flags);
1890 list_add_tail(&pdpram_blk->list, &info->app_info[i].app_sqlist);
1891 info->app_info[i].NumOfMsg++;
1892 spin_unlock_irqrestore(&free_buff_lock, flags);
1893 wake_up_interruptible(&info->app_info[i].wait_dpram_msg);
1896 info->app_info[i].nRxMsgMiss++;
1897 // Put memory back to free pool
1898 ft1000_free_buffer(pdpram_blk, &freercvpool);
1899 DEBUG("pdpram_blk::ft1000_get_buffer NULL\n");
1903 DEBUG("Out of memory in free receive command pool\n");
1904 info->app_info[i].nRxMsgMiss++;
1905 }//endof if (pdpram_blk != NULL)
1908 // DEBUG("app_info mismatch\n");
1912 pdpram_blk = ft1000_get_buffer (&freercvpool);
1913 //DEBUG("Memory allocated = 0x%8x\n", (u32)pdpram_blk);
1914 if (pdpram_blk != NULL) {
1915 if ( ft1000_receive_cmd(dev, pdpram_blk->pbuffer, MAX_CMD_SQSIZE, &nxtph) ) {
1916 ppseudo_hdr = (struct pseudo_hdr *)pdpram_blk->pbuffer;
1917 // Search for correct application block
1918 for (i=0; i<MAX_NUM_APP; i++) {
1919 if (info->app_info[i].app_id == ppseudo_hdr->portdest) {
1924 if (i == MAX_NUM_APP) {
1925 DEBUG("FT1000:ft1000_parse_dpram_msg: No application matching id = %d\n", ppseudo_hdr->portdest);
1926 // Put memory back to free pool
1927 ft1000_free_buffer(pdpram_blk, &freercvpool);
1930 if (info->app_info[i].NumOfMsg > MAX_MSG_LIMIT) {
1931 // Put memory back to free pool
1932 ft1000_free_buffer(pdpram_blk, &freercvpool);
1935 info->app_info[i].nRxMsg++;
1936 // Put message into the appropriate application block
1937 //pxu spin_lock_irqsave(&free_buff_lock, flags);
1938 list_add_tail(&pdpram_blk->list, &info->app_info[i].app_sqlist);
1939 info->app_info[i].NumOfMsg++;
1940 //pxu spin_unlock_irqrestore(&free_buff_lock, flags);
1941 //pxu wake_up_interruptible(&info->app_info[i].wait_dpram_msg);
1946 // Put memory back to free pool
1947 ft1000_free_buffer(pdpram_blk, &freercvpool);
1951 DEBUG("Out of memory in free receive command pool\n");
1955 } //endof if (size < MAX_CMD_SQSIZE)
1957 DEBUG("FT1000:dpc:Invalid total length for SlowQ = %d\n", size);
1959 status = ft1000_write_register (dev, FT1000_DB_DPRAM_RX, FT1000_REG_DOORBELL);
1961 else if (tempword & FT1000_DSP_ASIC_RESET) {
1962 //DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DSP_ASIC_RESET\n");
1964 // Let's reset the ASIC from the Host side as well
1965 status = ft1000_write_register (dev, ASIC_RESET_BIT, FT1000_REG_RESET);
1966 status = ft1000_read_register (dev, &tempword, FT1000_REG_RESET);
1968 while (tempword & ASIC_RESET_BIT) {
1969 status = ft1000_read_register (dev, &tempword, FT1000_REG_RESET);
1976 DEBUG("Unable to reset ASIC\n");
1977 return STATUS_SUCCESS;
1980 // Program WMARK register
1981 status = ft1000_write_register (dev, 0x600, FT1000_REG_MAG_WATERMARK);
1982 // clear ASIC reset doorbell
1983 status = ft1000_write_register (dev, FT1000_DSP_ASIC_RESET, FT1000_REG_DOORBELL);
1986 else if (tempword & FT1000_ASIC_RESET_REQ) {
1987 DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_ASIC_RESET_REQ\n");
1989 // clear ASIC reset request from DSP
1990 status = ft1000_write_register (dev, FT1000_ASIC_RESET_REQ, FT1000_REG_DOORBELL);
1991 status = ft1000_write_register (dev, HOST_INTF_BE, FT1000_REG_SUP_CTRL);
1992 // copy dsp session record from Adapter block
1993 status = ft1000_write_dpram32 (dev, 0, (u8 *)&info->DSPSess.Rec[0], 1024);
1994 // Program WMARK register
1995 status = ft1000_write_register (dev, 0x600, FT1000_REG_MAG_WATERMARK);
1996 // ring doorbell to tell DSP that ASIC is out of reset
1997 status = ft1000_write_register (dev, FT1000_ASIC_RESET_DSP, FT1000_REG_DOORBELL);
1999 else if (tempword & FT1000_DB_COND_RESET) {
2000 DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_COND_RESET\n");
2002 // Reset ASIC and DSP
2004 if (info->fAppMsgPend == 0) {
2005 // Reset ASIC and DSP
2007 status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (u8 *)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX);
2008 status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER1, (u8 *)&(info->DSP_TIME[1]), FT1000_MAG_DSP_TIMER1_INDX);
2009 status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER2, (u8 *)&(info->DSP_TIME[2]), FT1000_MAG_DSP_TIMER2_INDX);
2010 status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER3, (u8 *)&(info->DSP_TIME[3]), FT1000_MAG_DSP_TIMER3_INDX);
2011 info->CardReady = 0;
2012 info->DrvErrNum = DSP_CONDRESET_INFO;
2013 DEBUG("ft1000_hw:DSP conditional reset requested\n");
2014 info->ft1000_reset(dev->net);
2017 info->fProvComplete = 0;
2018 info->fCondResetPend = 1;
2021 ft1000_write_register(dev, FT1000_DB_COND_RESET, FT1000_REG_DOORBELL);
2024 }//endof if ( !status )
2026 //DEBUG("return from ft1000_poll.\n");
2027 return STATUS_SUCCESS;