2 tristate "Data acquisition support (comedi)"
4 depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
6 Enable support a wide range of data acquisition devices
12 bool "Comedi debugging"
14 This is an option for use by developers; most people should
15 say N here. This enables comedi core and driver debugging.
17 config COMEDI_DEFAULT_BUF_SIZE_KB
18 int "Comedi default initial asynchronous buffer size in KiB"
21 This is the default asynchronous buffer size which is used for
22 commands running in the background in kernel space. This
23 defaults to 2048 KiB of memory so that a 16 channel card
24 running at 10 kHz has of 2-4 seconds of buffer.
26 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
27 int "Comedi default maximum asynchronous buffer size in KiB"
30 This is the default maximum asynchronous buffer size which can
31 be requested by a userspace program without root privileges.
32 This is set to 20480 KiB so that a fast I/O card with 16
33 channels running at 100 kHz has 2-4 seconds of buffer.
35 menuconfig COMEDI_MISC_DRIVERS
36 bool "Comedi misc drivers"
38 Enable comedi misc drivers to be built
40 Note that the answer to this question won't directly affect the
41 kernel: saying N will just cause the configurator to skip all
42 the questions about misc non-hardware comedi drivers.
44 if COMEDI_MISC_DRIVERS
46 config COMEDI_KCOMEDILIB
47 tristate "Comedi kcomedilib"
52 tristate "Device bonding support"
53 depends on COMEDI_KCOMEDILIB
55 Enable support for a driver to 'bond' (merge) multiple subdevices
56 from multiple devices together as one.
58 To compile this driver as a module, choose M here: the module will be
62 tristate "Fake waveform generator support"
65 Enable support for the fake waveform generator.
66 This driver is mainly for testing purposes, but can also be used to
67 generate sample waveforms on systems that don't have data acquisition
70 To compile this driver as a module, choose M here: the module will be
74 tristate "Parallel port support"
76 Enable support for the standard parallel port.
77 A cheap and easy way to get a few more digital I/O lines. Steal
78 additional parallel ports from old computers or your neighbors'
81 To compile this driver as a module, choose M here: the module will be
82 called comedi_parport.
84 config COMEDI_SERIAL2002
85 tristate "Driver for serial connected hardware"
87 Enable support for serial connected hardware
89 To compile this driver as a module, choose M here: the module will be
93 tristate "Comedi skeleton driver"
95 Build the Skeleton driver, an example for driver writers
97 To compile this driver as a module, choose M here: the module will be
100 endif # COMEDI_MISC_DRIVERS
102 menuconfig COMEDI_ISA_DRIVERS
103 bool "Comedi ISA and PC/104 drivers"
106 Enable comedi ISA and PC/104 drivers to be built
108 Note that the answer to this question won't directly affect the
109 kernel: saying N will just cause the configurator to skip all
110 the questions about ISA and PC/104 comedi drivers.
112 if COMEDI_ISA_DRIVERS
114 config COMEDI_ACL7225B
115 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
117 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
118 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
120 To compile this driver as a module, choose M here: the module will be
124 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
126 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
128 To compile this driver as a module, choose M here: the module will be
132 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
135 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
136 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
138 To compile this driver as a module, choose M here: the module will be
142 tristate "Advantech PCL-725 and compatible ISA card support"
144 Enable support for Advantech PCL-725 and compatible ISA cards.
146 To compile this driver as a module, choose M here: the module will be
150 tristate "Advantech PCL-726 and compatible ISA card support"
152 Enable support for Advantech PCL-726 and compatible ISA cards.
154 To compile this driver as a module, choose M here: the module will be
158 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
160 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
163 To compile this driver as a module, choose M here: the module will be
167 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
168 depends on VIRT_TO_BUS
170 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
171 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
172 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
174 To compile this driver as a module, choose M here: the module will be
178 tristate "Advantech PCL-814 and PCL-816 ISA card support"
179 depends on VIRT_TO_BUS
181 Enable support for Advantech PCL-814 and PCL-816 ISA cards
183 To compile this driver as a module, choose M here: the module will be
187 tristate "Advantech PCL-718 and PCL-818 ISA card support"
188 depends on VIRT_TO_BUS
190 Enable support for Advantech PCL-818 ISA cards
191 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
193 To compile this driver as a module, choose M here: the module will be
196 config COMEDI_PCM3724
197 tristate "Advantech PCM-3724 PC/104 card support"
200 Enable support for Advantech PCM-3724 PC/104 cards.
202 To compile this driver as a module, choose M here: the module will be
205 config COMEDI_PCM3730
206 tristate "Advantech PCM-3730 and clone PC/104 board support"
208 Enable support for Advantech PCM-3730 and clone PC/104 boards
210 To compile this driver as a module, choose M here: the module will be
213 config COMEDI_AMPLC_DIO200_ISA
214 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
215 select COMEDI_AMPLC_DIO200
217 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
218 PC272E ISA DIO boards
220 To compile this driver as a module, choose M here: the module will be
223 config COMEDI_AMPLC_PC236_ISA
224 tristate "Amplicon PC36AT DIO board support"
225 select COMEDI_AMPLC_PC236
227 Enable support for Amplicon PC36AT ISA DIO board.
229 To compile this driver as a module, choose M here: the module will be
232 config COMEDI_AMPLC_PC263_ISA
233 tristate "Amplicon PC263 relay board support"
234 select COMEDI_AMPLC_PC263
236 Enable support for Amplicon PC263 ISA relay board.
238 To compile this driver as a module, choose M here: the module will be
242 tristate "Analog Devices RTI-800/815 ISA card support"
244 Enable support for Analog Devices RTI-800/815 ISA cards
246 To compile this driver as a module, choose M here: the module will be
250 tristate "Analog Devices RTI-802 ISA card support"
252 Enable support for Analog Devices RTI-802 ISA cards
254 To compile this driver as a module, choose M here: the module will be
257 config COMEDI_DAS16M1
258 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
262 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
264 To compile this driver as a module, choose M here: the module will be
267 config COMEDI_DAS08_ISA
268 tristate "DAS-08 compatible ISA and PC/104 card support"
271 Enable support for Keithley Metrabyte/ComputerBoards DAS08
272 and compatible ISA and PC/104 cards:
273 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
274 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
275 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
277 To compile this driver as a module, choose M here: the module will be
281 tristate "DAS-16 compatible ISA and PC/104 card support"
285 Enable support for Keithley Metrabyte/ComputerBoards DAS16
286 and compatible ISA and PC/104 cards:
287 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
288 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
289 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
290 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
291 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
292 CIO-DAS1602/16, CIO-DAS16/330
294 To compile this driver as a module, choose M here: the module will be
298 tristate "DAS800 and compatible ISA card support"
301 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
302 Keithley Metrabyte DAS-800, DAS-801, DAS-802
303 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
306 To compile this driver as a module, choose M here: the module will be
309 config COMEDI_DAS1800
310 tristate "DAS1800 and compatible ISA card support"
311 depends on VIRT_TO_BUS
314 Enable support for DAS1800 and compatible ISA cards
315 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
316 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
317 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
318 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
321 To compile this driver as a module, choose M here: the module will be
324 config COMEDI_DAS6402
325 tristate "DAS6402 and compatible ISA card support"
327 Enable support for DAS6402 and compatible ISA cards
328 Computerboards, Keithley Metrabyte DAS6402 and compatibles
330 To compile this driver as a module, choose M here: the module will be
334 tristate "Data Translation DT2801 ISA card support"
336 Enable support for Data Translation DT2801 ISA cards
338 To compile this driver as a module, choose M here: the module will be
342 tristate "Data Translation DT2811 ISA card support"
344 Enable support for Data Translation DT2811 ISA cards
346 To compile this driver as a module, choose M here: the module will be
350 tristate "Data Translation DT2814 ISA card support"
352 Enable support for Data Translation DT2814 ISA cards
354 To compile this driver as a module, choose M here: the module will be
358 tristate "Data Translation DT2815 ISA card support"
360 Enable support for Data Translation DT2815 ISA cards
362 To compile this driver as a module, choose M here: the module will be
366 tristate "Data Translation DT2817 ISA card support"
368 Enable support for Data Translation DT2817 ISA cards
370 To compile this driver as a module, choose M here: the module will be
374 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
376 depends on VIRT_TO_BUS
378 Enable support for Data Translation DT2821 series including DT-EZ
379 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
380 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
381 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
383 To compile this driver as a module, choose M here: the module will be
386 config COMEDI_DMM32AT
387 tristate "Diamond Systems MM-32-AT PC/104 board support"
389 Enable support for Diamond Systems MM-32-AT PC/104 boards
391 To compile this driver as a module, choose M here: the module will be
395 tristate "FL512 ISA card support"
397 Enable support for FL512 ISA card
399 To compile this driver as a module, choose M here: the module will be
402 config COMEDI_AIO_AIO12_8
403 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
406 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
408 To compile this driver as a module, choose M here: the module will be
411 config COMEDI_AIO_IIRO_16
412 tristate "I/O Products PC/104 IIRO16 Board support"
414 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
417 To compile this driver as a module, choose M here: the module will be
420 config COMEDI_C6XDIGIO
421 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
423 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
426 To compile this driver as a module, choose M here: the module will be
430 tristate "Micro/sys MPC-624 PC/104 board support"
432 Enable support for Micro/sys MPC-624 PC/104 board
434 To compile this driver as a module, choose M here: the module will be
438 tristate "MicroAxial ADQ12-B data acquisition and control card support"
440 Enable MicroAxial ADQ12-B daq and control card support.
442 To compile this driver as a module, choose M here: the module will be
445 config COMEDI_NI_AT_A2150
446 tristate "NI AT-A2150 ISA card support"
447 depends on VIRT_TO_BUS
449 Enable support for National Instruments AT-A2150 cards
451 To compile this driver as a module, choose M here: the module will be
454 config COMEDI_NI_AT_AO
455 tristate "NI AT-AO-6/10 EISA card support"
457 Enable support for National Instruments AT-AO-6/10 cards
459 To compile this driver as a module, choose M here: the module will be
462 config COMEDI_NI_ATMIO
463 tristate "NI AT-MIO E series ISA-PNP card support"
468 Enable support for National Instruments AT-MIO E series cards
469 National Instruments AT-MIO-16E-1 (ni_atmio),
470 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
471 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
473 To compile this driver as a module, choose M here: the module will be
476 config COMEDI_NI_ATMIO16D
477 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
481 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
483 To compile this driver as a module, choose M here: the module will be
487 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
489 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
491 To compile this driver as a module, choose M here: the module will be
494 config COMEDI_PCMDA12
495 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
497 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
498 Note that the board is not ISA-PNP capable and thus needs the I/O
499 port comedi_config parameter.
501 To compile this driver as a module, choose M here: the module will be
505 tristate "Winsystems PCM-MIO PC/104 board support"
507 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
509 To compile this driver as a module, choose M here: the module will be
513 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
515 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
517 To compile this driver as a module, choose M here: the module will be
520 config COMEDI_MULTIQ3
521 tristate "Quanser Consulting MultiQ-3 ISA card support"
523 Enable support for Quanser Consulting MultiQ-3 ISA cards
525 To compile this driver as a module, choose M here: the module will be
529 tristate "Generic driver for very simple devices"
531 Enable generic support for very simple / POC (Piece of Crap) boards,
532 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
535 To compile this driver as a module, choose M here: the module will be
538 endif # COMEDI_ISA_DRIVERS
540 menuconfig COMEDI_PCI_DRIVERS
541 bool "Comedi PCI drivers"
544 Enable comedi PCI drivers to be built
546 Note that the answer to this question won't directly affect the
547 kernel: saying N will just cause the configurator to skip all
548 the questions about PCI comedi drivers.
550 if COMEDI_PCI_DRIVERS
552 config COMEDI_ADDI_APCI_035
553 tristate "ADDI-DATA APCI_035 support"
554 depends on VIRT_TO_BUS
556 Enable support for ADDI-DATA APCI_035 cards
558 To compile this driver as a module, choose M here: the module will be
559 called addi_apci_035.
561 config COMEDI_ADDI_APCI_1032
562 tristate "ADDI-DATA APCI_1032 support"
563 depends on VIRT_TO_BUS
565 Enable support for ADDI-DATA APCI_1032 cards
567 To compile this driver as a module, choose M here: the module will be
568 called addi_apci_1032.
570 config COMEDI_ADDI_APCI_1500
571 tristate "ADDI-DATA APCI_1500 support"
572 depends on VIRT_TO_BUS
574 Enable support for ADDI-DATA APCI_1500 cards
576 To compile this driver as a module, choose M here: the module will be
577 called addi_apci_1500.
579 config COMEDI_ADDI_APCI_1516
580 tristate "ADDI-DATA APCI_1516 support"
581 depends on VIRT_TO_BUS
583 Enable support for ADDI-DATA APCI_1516 cards
585 To compile this driver as a module, choose M here: the module will be
586 called addi_apci_1516.
588 config COMEDI_ADDI_APCI_1564
589 tristate "ADDI-DATA APCI_1564 support"
590 depends on VIRT_TO_BUS
592 Enable support for ADDI-DATA APCI_1564 cards
594 To compile this driver as a module, choose M here: the module will be
595 called addi_apci_1564.
597 config COMEDI_ADDI_APCI_16XX
598 tristate "ADDI-DATA APCI_16xx support"
599 depends on VIRT_TO_BUS
601 Enable support for ADDI-DATA APCI_16xx cards
603 To compile this driver as a module, choose M here: the module will be
604 called addi_apci_16xx.
606 config COMEDI_ADDI_APCI_2016
607 tristate "ADDI-DATA APCI_2016 support"
608 depends on VIRT_TO_BUS
610 Enable support for ADDI-DATA APCI_2016 cards
612 To compile this driver as a module, choose M here: the module will be
613 called addi_apci_2016.
615 config COMEDI_ADDI_APCI_2032
616 tristate "ADDI-DATA APCI_2032 support"
617 depends on VIRT_TO_BUS
619 Enable support for ADDI-DATA APCI_2032 cards
621 To compile this driver as a module, choose M here: the module will be
622 called addi_apci_2032.
624 config COMEDI_ADDI_APCI_2200
625 tristate "ADDI-DATA APCI_2200 support"
626 depends on VIRT_TO_BUS
628 Enable support for ADDI-DATA APCI_2200 cards
630 To compile this driver as a module, choose M here: the module will be
631 called addi_apci_2200.
633 config COMEDI_ADDI_APCI_3001
634 tristate "ADDI-DATA APCI_3001 support"
635 depends on VIRT_TO_BUS
638 Enable support for ADDI-DATA APCI_3001 cards
640 To compile this driver as a module, choose M here: the module will be
641 called addi_apci_3001.
643 config COMEDI_ADDI_APCI_3120
644 tristate "ADDI-DATA APCI_3520 support"
645 depends on VIRT_TO_BUS
648 Enable support for ADDI-DATA APCI_3520 cards
650 To compile this driver as a module, choose M here: the module will be
651 called addi_apci_3120.
653 config COMEDI_ADDI_APCI_3501
654 tristate "ADDI-DATA APCI_3501 support"
655 depends on VIRT_TO_BUS
657 Enable support for ADDI-DATA APCI_3501 cards
659 To compile this driver as a module, choose M here: the module will be
660 called addi_apci_3501.
662 config COMEDI_ADDI_APCI_3XXX
663 tristate "ADDI-DATA APCI_3xxx support"
664 depends on VIRT_TO_BUS
666 Enable support for ADDI-DATA APCI_3xxx cards
668 To compile this driver as a module, choose M here: the module will be
669 called addi_apci_3xxx.
671 config COMEDI_ADL_PCI6208
672 tristate "ADLink PCI-6208A support"
674 Enable support for ADLink PCI-6208A cards
676 To compile this driver as a module, choose M here: the module will be
679 config COMEDI_ADL_PCI7X3X
680 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
682 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
683 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
684 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
685 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
687 To compile this driver as a module, choose M here: the module will be
690 config COMEDI_ADL_PCI7296
691 tristate "ADLink PCI-72xx opto-22 compatible digital i/o board support"
694 Enable support for ADlink PCI-72xx opto-22 compatible digital i/o
695 boards. Supported boards include the 24-channel PCI-7224, 48-channel
696 PCI-7248, and 96-channel PCI-7296.
698 To compile this driver as a module, choose M here: the module will be
701 config COMEDI_ADL_PCI8164
702 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
704 Enable support for ADlink PCI-8164 4 Axes Motion Control board
706 To compile this driver as a module, choose M here: the module will be
709 config COMEDI_ADL_PCI9111
710 tristate "ADLink PCI-9111HR support"
713 Enable support for ADlink PCI9111 cards
715 To compile this driver as a module, choose M here: the module will be
718 config COMEDI_ADL_PCI9118
719 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
721 depends on VIRT_TO_BUS
723 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
725 To compile this driver as a module, choose M here: the module will be
728 config COMEDI_ADV_PCI1710
729 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
731 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
732 PCI-1713, PCI-1720 and PCI-1731
734 To compile this driver as a module, choose M here: the module will be
737 config COMEDI_ADV_PCI1723
738 tristate "Advantech PCI-1723 support"
740 Enable support for Advantech PCI-1723 cards
742 To compile this driver as a module, choose M here: the module will be
745 config COMEDI_ADV_PCI_DIO
746 tristate "Advantech PCI DIO card support"
749 Enable support for Advantech PCI DIO cards
750 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
751 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
752 PCI-1760 and PCI-1762
754 To compile this driver as a module, choose M here: the module will be
757 config COMEDI_AMPLC_DIO200_PCI
758 tristate "Amplicon PCI215 and PCI272 DIO board support"
759 select COMEDI_AMPLC_DIO200
761 Enable support for Amplicon PCI215 and PCI272 DIO boards.
763 To compile this driver as a module, choose M here: the module will be
766 config COMEDI_AMPLC_PC236_PCI
767 tristate "Amplicon PCI236 DIO board support"
768 select COMEDI_AMPLC_PC236
770 Enable support for Amplicon PCI236 DIO board.
772 To compile this driver as a module, choose M here: the module will be
775 config COMEDI_AMPLC_PC263_PCI
776 tristate "Amplicon PCI263 relay board support"
777 select COMEDI_AMPLC_PC263
779 Enable support for Amplicon PCI263 relay board.
781 To compile this driver as a module, choose M here: the module will be
784 config COMEDI_AMPLC_PCI224
785 tristate "Amplicon PCI224 and PCI234 support"
788 Enable support for Amplicon PCI224 and PCI234 AO boards
790 To compile this driver as a module, choose M here: the module will be
793 config COMEDI_AMPLC_PCI230
794 tristate "Amplicon PCI230 and PCI260 support"
797 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
800 To compile this driver as a module, choose M here: the module will be
803 config COMEDI_CONTEC_PCI_DIO
804 tristate "Contec PIO1616L digital I/O board support"
806 Enable support for the Contec PIO1616L digital I/O board
808 To compile this driver as a module, choose M here: the module will be
809 called contec_pci_dio.
811 config COMEDI_DAS08_PCI
812 tristate "DAS-08 PCI support"
815 Enable support for PCI DAS-08 cards.
817 To compile this driver as a module, choose M here: the module will be
821 tristate "Data Translation DT3000 series support"
823 Enable support for Data Translation DT3000 series
824 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
827 To compile this driver as a module, choose M here: the module will be
830 config COMEDI_DYNA_PCI10XX
831 tristate "Dynalog PCI DAQ series support"
833 Enable support for Dynalog PCI DAQ series
836 To compile this driver as a module, choose M here: the module will be
839 config COMEDI_UNIOXX5
840 tristate "Fastwel UNIOxx-5 analog and digital io board support"
842 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
844 To compile this driver as a module, choose M here: the module will be
847 config COMEDI_GSC_HPDI
848 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
851 Enable support for General Standards Corporation high speed parallel
852 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
853 Only receive mode works, transmit not supported.
855 To compile this driver as a module, choose M here: the module will be
858 config COMEDI_ICP_MULTI
859 tristate "Inova ICP_MULTI support"
861 Enable support for Inova ICP_MULTI card
863 To compile this driver as a module, choose M here: the module will be
866 config COMEDI_II_PCI20KC
867 tristate "Intelligent Instruments PCI-20001C carrier support"
869 Enable support for Intelligent Instruments PCI-20001C carrier
870 PCI-20001, PCI-20006 and PCI-20341
872 To compile this driver as a module, choose M here: the module will be
875 config COMEDI_DAQBOARD2000
876 tristate "IOtech DAQboard/2000 support"
879 Enable support for the IOtech DAQboard/2000
881 To compile this driver as a module, choose M here: the module will be
884 config COMEDI_JR3_PCI
885 tristate "JR3/PCI force sensor board support"
887 Enable support for JR3/PCI force sensor boards
889 To compile this driver as a module, choose M here: the module will be
892 config COMEDI_KE_COUNTER
893 tristate "Kolter-Electronic PCI Counter 1 card support"
895 Enable support for Kolter-Electronic PCI Counter 1 cards
897 To compile this driver as a module, choose M here: the module will be
900 config COMEDI_CB_PCIDAS64
901 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
905 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
906 60xx, and 4020 series with the PLX 9080 PCI controller
908 To compile this driver as a module, choose M here: the module will be
911 config COMEDI_CB_PCIDAS
912 tristate "MeasurementComputing PCI-DAS support"
916 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
917 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
918 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
921 To compile this driver as a module, choose M here: the module will be
924 config COMEDI_CB_PCIDDA
925 tristate "MeasurementComputing PCI-DDA series support"
928 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
929 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
930 PCI-DDA04/16 and PCI-DDA02/16
932 To compile this driver as a module, choose M here: the module will be
935 config COMEDI_CB_PCIDIO
936 tristate "MeasurementComputing PCI-DIO series support"
939 Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
940 PCI-DIO24, PCI-DIO24H and PCI-DIO48H
942 To compile this driver as a module, choose M here: the module will be
945 config COMEDI_CB_PCIMDAS
946 tristate "MeasurementComputing PCIM-DAS1602/16 support"
949 Enable support for ComputerBoards/MeasurementComputing PCI Migration
950 series PCIM-DAS1602/16
952 To compile this driver as a module, choose M here: the module will be
955 config COMEDI_CB_PCIMDDA
956 tristate "MeasurementComputing PCIM-DDA06-16 support"
959 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
961 To compile this driver as a module, choose M here: the module will be
965 tristate "Meilhaus ME-4000 support"
967 Enable support for Meilhaus PCI data acquisition cards
968 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
970 To compile this driver as a module, choose M here: the module will be
974 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
976 Enable support for Meilhaus PCI data acquisition cards
977 ME-2000i, ME-2600i and ME-3000vm1
979 To compile this driver as a module, choose M here: the module will be
982 config COMEDI_NI_6527
983 tristate "NI 6527 support"
986 Enable support for the National Instruments 6527 PCI card
988 To compile this driver as a module, choose M here: the module will be
991 config COMEDI_NI_65XX
992 tristate "NI 65xx static dio PCI card support"
995 Enable support for National Instruments 65xx static dio boards.
996 Supported devices: National Instruments PCI-6509 (ni_65xx),
997 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
998 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
999 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1001 To compile this driver as a module, choose M here: the module will be
1004 config COMEDI_NI_660X
1005 tristate "NI 660x counter/timer PCI card support"
1006 select COMEDI_NI_TIOCMD
1008 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1009 PXI-6602 and PXI-6608.
1011 To compile this driver as a module, choose M here: the module will be
1014 config COMEDI_NI_670X
1015 tristate "NI 670x PCI card support"
1018 Enable support for National Instruments PCI-6703 and PCI-6704
1020 To compile this driver as a module, choose M here: the module will be
1023 config COMEDI_NI_LABPC
1024 tristate "NI Lab-PC and compatibles ISA and PCI support"
1028 depends on VIRT_TO_BUS
1030 Enable support for National Instruments Lab-PC and compatibles
1031 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1032 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1033 not yet been added to the driver.
1035 To compile this driver as a module, choose M here: the module will be
1038 config COMEDI_NI_PCIDIO
1039 tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
1043 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1044 PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
1045 PXI-6503, PCI-6533 and PCI-6534
1046 The DIO-96 appears as four 8255 subdevices. See the 8255
1047 driver notes for details.
1049 To compile this driver as a module, choose M here: the module will be
1052 config COMEDI_NI_PCIMIO
1053 tristate "NI PCI-MIO-E series and M series support"
1054 select COMEDI_NI_TIOCMD
1058 Enable support for National Instruments PCI-MIO-E series and M series
1059 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1060 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1061 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1062 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1063 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1064 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1065 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1066 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1067 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1069 To compile this driver as a module, choose M here: the module will be
1072 config COMEDI_RTD520
1073 tristate "Real Time Devices PCI4520/DM7520 support"
1075 Enable support for Real Time Devices PCI4520/DM7520
1077 To compile this driver as a module, choose M here: the module will be
1081 tristate "Sensoray s526 support"
1083 Enable support for Sensoray s526
1085 To compile this driver as a module, choose M here: the module will be
1089 tristate "Sensoray 626 support"
1092 Enable support for Sensoray 626
1094 To compile this driver as a module, choose M here: the module will be
1097 config COMEDI_SSV_DNP
1098 tristate "SSV Embedded Systems DIL/Net-PC support"
1100 Enable support for SSV Embedded Systems DIL/Net-PC
1102 To compile this driver as a module, choose M here: the module will be
1108 config COMEDI_NI_TIOCMD
1110 select COMEDI_NI_TIO
1113 endif # COMEDI_PCI_DRIVERS
1115 menuconfig COMEDI_PCMCIA_DRIVERS
1116 bool "Comedi PCMCIA drivers"
1119 Enable comedi PCMCIA and PCCARD drivers to be built
1121 Note that the answer to this question won't directly affect the
1122 kernel: saying N will just cause the configurator to skip all
1123 the questions about PCMCIA comedi drivers.
1125 if COMEDI_PCMCIA_DRIVERS
1127 config COMEDI_CB_DAS16_CS
1128 tristate "CB DAS16 series PCMCIA support"
1130 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1131 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1133 To compile this driver as a module, choose M here: the module will be
1136 config COMEDI_DAS08_CS
1137 tristate "CB DAS08 PCMCIA support"
1140 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1143 To compile this driver as a module, choose M here: the module will be
1146 config COMEDI_NI_DAQ_700_CS
1147 tristate "NI DAQCard-700 PCMCIA support"
1149 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1151 To compile this driver as a module, choose M here: the module will be
1154 config COMEDI_NI_DAQ_DIO24_CS
1155 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1158 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1160 To compile this driver as a module, choose M here: the module will be
1161 called ni_daq_dio24.
1163 config COMEDI_NI_LABPC_CS
1164 tristate "NI DAQCard-1200 PCMCIA support"
1165 depends on COMEDI_NI_LABPC
1167 Enable support for the National Instruments PCMCIA DAQCard-1200
1169 To compile this driver as a module, choose M here: the module will be
1172 config COMEDI_NI_MIO_CS
1173 tristate "NI DAQCard E series PCMCIA support"
1174 select COMEDI_NI_TIO
1178 Enable support for the National Instruments PCMCIA DAQCard E series
1179 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1182 To compile this driver as a module, choose M here: the module will be
1185 config COMEDI_QUATECH_DAQP_CS
1186 tristate "Quatech DAQP PCMCIA data capture card support"
1188 Enable support for the Quatech DAQP PCMCIA data capture cards
1189 DAQP-208 and DAQP-308
1191 To compile this driver as a module, choose M here: the module will be
1192 called quatech_daqp_cs.
1194 endif # COMEDI_PCMCIA_DRIVERS
1196 menuconfig COMEDI_USB_DRIVERS
1197 bool "Comedi USB drivers"
1200 Enable comedi USB drivers to be built
1202 Note that the answer to this question won't directly affect the
1203 kernel: saying N will just cause the configurator to skip all
1204 the questions about USB comedi drivers.
1206 if COMEDI_USB_DRIVERS
1208 config COMEDI_DT9812
1209 tristate "DataTranslation DT9812 USB module support"
1211 Enable support for the Data Translation DT9812 USB module
1213 To compile this driver as a module, choose M here: the module will be
1216 config COMEDI_USBDUX
1217 tristate "ITL USB-DUX-D support"
1219 Enable support for the Incite Technology Ltd USB-DUX-D Board
1221 To compile this driver as a module, choose M here: the module will be
1224 config COMEDI_USBDUXFAST
1225 tristate "ITL USB-DUXfast support"
1228 Enable support for the Incite Technology Ltd USB-DUXfast Board
1230 To compile this driver as a module, choose M here: the module will be
1233 config COMEDI_USBDUXSIGMA
1234 tristate "ITL USB-DUXsigma support"
1237 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1239 To compile this driver as a module, choose M here: the module will be
1242 config COMEDI_VMK80XX
1243 tristate "Velleman VM110/VM140 USB Board support"
1245 Build the Velleman USB Board Low-Level Driver supporting the
1246 K8055/K8061 aka VM110/VM140 devices
1248 To compile this driver as a module, choose M here: the module will be
1251 endif # COMEDI_USB_DRIVERS
1254 tristate "Generic 8255 support"
1256 Enable generic 8255 support.
1258 You should enable compilation this driver if you plan to use a board
1259 that has an 8255 chip. For multifunction boards, the main driver will
1260 configure the 8255 subdevice automatically.
1262 Note that most PCI 8255 boards do NOT work with this driver, and
1263 need a separate driver as a wrapper.
1265 To compile this driver as a module, choose M here: the module will be
1271 config COMEDI_AMPLC_DIO200
1275 config COMEDI_AMPLC_PC236
1279 config COMEDI_AMPLC_PC263
1286 config COMEDI_NI_TIO