]> Pileus Git - ~andy/linux/blob - drivers/scsi/libfc/fc_rport.c
[SCSI] Merge tag 'fcoe-02-19-13' into for-linus
[~andy/linux] / drivers / scsi / libfc / fc_rport.c
1 /*
2  * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Maintained at www.Open-FCoE.org
18  */
19
20 /*
21  * RPORT GENERAL INFO
22  *
23  * This file contains all processing regarding fc_rports. It contains the
24  * rport state machine and does all rport interaction with the transport class.
25  * There should be no other places in libfc that interact directly with the
26  * transport class in regards to adding and deleting rports.
27  *
28  * fc_rport's represent N_Port's within the fabric.
29  */
30
31 /*
32  * RPORT LOCKING
33  *
34  * The rport should never hold the rport mutex and then attempt to acquire
35  * either the lport or disc mutexes. The rport's mutex is considered lesser
36  * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
37  * more comments on the hierarchy.
38  *
39  * The locking strategy is similar to the lport's strategy. The lock protects
40  * the rport's states and is held and released by the entry points to the rport
41  * block. All _enter_* functions correspond to rport states and expect the rport
42  * mutex to be locked before calling them. This means that rports only handle
43  * one request or response at a time, since they're not critical for the I/O
44  * path this potential over-use of the mutex is acceptable.
45  */
46
47 #include <linux/kernel.h>
48 #include <linux/spinlock.h>
49 #include <linux/interrupt.h>
50 #include <linux/slab.h>
51 #include <linux/rcupdate.h>
52 #include <linux/timer.h>
53 #include <linux/workqueue.h>
54 #include <linux/export.h>
55 #include <asm/unaligned.h>
56
57 #include <scsi/libfc.h>
58 #include <scsi/fc_encode.h>
59
60 #include "fc_libfc.h"
61
62 static struct workqueue_struct *rport_event_queue;
63
64 static void fc_rport_enter_flogi(struct fc_rport_priv *);
65 static void fc_rport_enter_plogi(struct fc_rport_priv *);
66 static void fc_rport_enter_prli(struct fc_rport_priv *);
67 static void fc_rport_enter_rtv(struct fc_rport_priv *);
68 static void fc_rport_enter_ready(struct fc_rport_priv *);
69 static void fc_rport_enter_logo(struct fc_rport_priv *);
70 static void fc_rport_enter_adisc(struct fc_rport_priv *);
71
72 static void fc_rport_recv_plogi_req(struct fc_lport *, struct fc_frame *);
73 static void fc_rport_recv_prli_req(struct fc_rport_priv *, struct fc_frame *);
74 static void fc_rport_recv_prlo_req(struct fc_rport_priv *, struct fc_frame *);
75 static void fc_rport_recv_logo_req(struct fc_lport *, struct fc_frame *);
76 static void fc_rport_timeout(struct work_struct *);
77 static void fc_rport_error(struct fc_rport_priv *, struct fc_frame *);
78 static void fc_rport_error_retry(struct fc_rport_priv *, struct fc_frame *);
79 static void fc_rport_work(struct work_struct *);
80
81 static const char *fc_rport_state_names[] = {
82         [RPORT_ST_INIT] = "Init",
83         [RPORT_ST_FLOGI] = "FLOGI",
84         [RPORT_ST_PLOGI_WAIT] = "PLOGI_WAIT",
85         [RPORT_ST_PLOGI] = "PLOGI",
86         [RPORT_ST_PRLI] = "PRLI",
87         [RPORT_ST_RTV] = "RTV",
88         [RPORT_ST_READY] = "Ready",
89         [RPORT_ST_ADISC] = "ADISC",
90         [RPORT_ST_DELETE] = "Delete",
91 };
92
93 /**
94  * fc_rport_lookup() - Lookup a remote port by port_id
95  * @lport:   The local port to lookup the remote port on
96  * @port_id: The remote port ID to look up
97  *
98  * The caller must hold either disc_mutex or rcu_read_lock().
99  */
100 static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
101                                              u32 port_id)
102 {
103         struct fc_rport_priv *rdata;
104
105         list_for_each_entry_rcu(rdata, &lport->disc.rports, peers)
106                 if (rdata->ids.port_id == port_id)
107                         return rdata;
108         return NULL;
109 }
110
111 /**
112  * fc_rport_create() - Create a new remote port
113  * @lport: The local port this remote port will be associated with
114  * @ids:   The identifiers for the new remote port
115  *
116  * The remote port will start in the INIT state.
117  *
118  * Locking note:  must be called with the disc_mutex held.
119  */
120 static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport,
121                                              u32 port_id)
122 {
123         struct fc_rport_priv *rdata;
124
125         rdata = lport->tt.rport_lookup(lport, port_id);
126         if (rdata)
127                 return rdata;
128
129         rdata = kzalloc(sizeof(*rdata) + lport->rport_priv_size, GFP_KERNEL);
130         if (!rdata)
131                 return NULL;
132
133         rdata->ids.node_name = -1;
134         rdata->ids.port_name = -1;
135         rdata->ids.port_id = port_id;
136         rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
137
138         kref_init(&rdata->kref);
139         mutex_init(&rdata->rp_mutex);
140         rdata->local_port = lport;
141         rdata->rp_state = RPORT_ST_INIT;
142         rdata->event = RPORT_EV_NONE;
143         rdata->flags = FC_RP_FLAGS_REC_SUPPORTED;
144         rdata->e_d_tov = lport->e_d_tov;
145         rdata->r_a_tov = lport->r_a_tov;
146         rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
147         INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout);
148         INIT_WORK(&rdata->event_work, fc_rport_work);
149         if (port_id != FC_FID_DIR_SERV) {
150                 rdata->lld_event_callback = lport->tt.rport_event_callback;
151                 list_add_rcu(&rdata->peers, &lport->disc.rports);
152         }
153         return rdata;
154 }
155
156 /**
157  * fc_rport_destroy() - Free a remote port after last reference is released
158  * @kref: The remote port's kref
159  */
160 static void fc_rport_destroy(struct kref *kref)
161 {
162         struct fc_rport_priv *rdata;
163
164         rdata = container_of(kref, struct fc_rport_priv, kref);
165         kfree_rcu(rdata, rcu);
166 }
167
168 /**
169  * fc_rport_state() - Return a string identifying the remote port's state
170  * @rdata: The remote port
171  */
172 static const char *fc_rport_state(struct fc_rport_priv *rdata)
173 {
174         const char *cp;
175
176         cp = fc_rport_state_names[rdata->rp_state];
177         if (!cp)
178                 cp = "Unknown";
179         return cp;
180 }
181
182 /**
183  * fc_set_rport_loss_tmo() - Set the remote port loss timeout
184  * @rport:   The remote port that gets a new timeout value
185  * @timeout: The new timeout value (in seconds)
186  */
187 void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
188 {
189         if (timeout)
190                 rport->dev_loss_tmo = timeout;
191         else
192                 rport->dev_loss_tmo = 1;
193 }
194 EXPORT_SYMBOL(fc_set_rport_loss_tmo);
195
196 /**
197  * fc_plogi_get_maxframe() - Get the maximum payload from the common service
198  *                           parameters in a FLOGI frame
199  * @flp:    The FLOGI or PLOGI payload
200  * @maxval: The maximum frame size upper limit; this may be less than what
201  *          is in the service parameters
202  */
203 static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
204                                           unsigned int maxval)
205 {
206         unsigned int mfs;
207
208         /*
209          * Get max payload from the common service parameters and the
210          * class 3 receive data field size.
211          */
212         mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK;
213         if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
214                 maxval = mfs;
215         mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs);
216         if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
217                 maxval = mfs;
218         return maxval;
219 }
220
221 /**
222  * fc_rport_state_enter() - Change the state of a remote port
223  * @rdata: The remote port whose state should change
224  * @new:   The new state
225  *
226  * Locking Note: Called with the rport lock held
227  */
228 static void fc_rport_state_enter(struct fc_rport_priv *rdata,
229                                  enum fc_rport_state new)
230 {
231         if (rdata->rp_state != new)
232                 rdata->retries = 0;
233         rdata->rp_state = new;
234 }
235
236 /**
237  * fc_rport_work() - Handler for remote port events in the rport_event_queue
238  * @work: Handle to the remote port being dequeued
239  */
240 static void fc_rport_work(struct work_struct *work)
241 {
242         u32 port_id;
243         struct fc_rport_priv *rdata =
244                 container_of(work, struct fc_rport_priv, event_work);
245         struct fc_rport_libfc_priv *rpriv;
246         enum fc_rport_event event;
247         struct fc_lport *lport = rdata->local_port;
248         struct fc_rport_operations *rport_ops;
249         struct fc_rport_identifiers ids;
250         struct fc_rport *rport;
251         struct fc4_prov *prov;
252         u8 type;
253
254         mutex_lock(&rdata->rp_mutex);
255         event = rdata->event;
256         rport_ops = rdata->ops;
257         rport = rdata->rport;
258
259         FC_RPORT_DBG(rdata, "work event %u\n", event);
260
261         switch (event) {
262         case RPORT_EV_READY:
263                 ids = rdata->ids;
264                 rdata->event = RPORT_EV_NONE;
265                 rdata->major_retries = 0;
266                 kref_get(&rdata->kref);
267                 mutex_unlock(&rdata->rp_mutex);
268
269                 if (!rport)
270                         rport = fc_remote_port_add(lport->host, 0, &ids);
271                 if (!rport) {
272                         FC_RPORT_DBG(rdata, "Failed to add the rport\n");
273                         lport->tt.rport_logoff(rdata);
274                         kref_put(&rdata->kref, lport->tt.rport_destroy);
275                         return;
276                 }
277                 mutex_lock(&rdata->rp_mutex);
278                 if (rdata->rport)
279                         FC_RPORT_DBG(rdata, "rport already allocated\n");
280                 rdata->rport = rport;
281                 rport->maxframe_size = rdata->maxframe_size;
282                 rport->supported_classes = rdata->supported_classes;
283
284                 rpriv = rport->dd_data;
285                 rpriv->local_port = lport;
286                 rpriv->rp_state = rdata->rp_state;
287                 rpriv->flags = rdata->flags;
288                 rpriv->e_d_tov = rdata->e_d_tov;
289                 rpriv->r_a_tov = rdata->r_a_tov;
290                 mutex_unlock(&rdata->rp_mutex);
291
292                 if (rport_ops && rport_ops->event_callback) {
293                         FC_RPORT_DBG(rdata, "callback ev %d\n", event);
294                         rport_ops->event_callback(lport, rdata, event);
295                 }
296                 if (rdata->lld_event_callback) {
297                         FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
298                         rdata->lld_event_callback(lport, rdata, event);
299                 }
300                 kref_put(&rdata->kref, lport->tt.rport_destroy);
301                 break;
302
303         case RPORT_EV_FAILED:
304         case RPORT_EV_LOGO:
305         case RPORT_EV_STOP:
306                 if (rdata->prli_count) {
307                         mutex_lock(&fc_prov_mutex);
308                         for (type = 1; type < FC_FC4_PROV_SIZE; type++) {
309                                 prov = fc_passive_prov[type];
310                                 if (prov && prov->prlo)
311                                         prov->prlo(rdata);
312                         }
313                         mutex_unlock(&fc_prov_mutex);
314                 }
315                 port_id = rdata->ids.port_id;
316                 mutex_unlock(&rdata->rp_mutex);
317
318                 if (rport_ops && rport_ops->event_callback) {
319                         FC_RPORT_DBG(rdata, "callback ev %d\n", event);
320                         rport_ops->event_callback(lport, rdata, event);
321                 }
322                 if (rdata->lld_event_callback) {
323                         FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
324                         rdata->lld_event_callback(lport, rdata, event);
325                 }
326                 cancel_delayed_work_sync(&rdata->retry_work);
327
328                 /*
329                  * Reset any outstanding exchanges before freeing rport.
330                  */
331                 lport->tt.exch_mgr_reset(lport, 0, port_id);
332                 lport->tt.exch_mgr_reset(lport, port_id, 0);
333
334                 if (rport) {
335                         rpriv = rport->dd_data;
336                         rpriv->rp_state = RPORT_ST_DELETE;
337                         mutex_lock(&rdata->rp_mutex);
338                         rdata->rport = NULL;
339                         mutex_unlock(&rdata->rp_mutex);
340                         fc_remote_port_delete(rport);
341                 }
342
343                 mutex_lock(&lport->disc.disc_mutex);
344                 mutex_lock(&rdata->rp_mutex);
345                 if (rdata->rp_state == RPORT_ST_DELETE) {
346                         if (port_id == FC_FID_DIR_SERV) {
347                                 rdata->event = RPORT_EV_NONE;
348                                 mutex_unlock(&rdata->rp_mutex);
349                                 kref_put(&rdata->kref, lport->tt.rport_destroy);
350                         } else if ((rdata->flags & FC_RP_STARTED) &&
351                                    rdata->major_retries <
352                                    lport->max_rport_retry_count) {
353                                 rdata->major_retries++;
354                                 rdata->event = RPORT_EV_NONE;
355                                 FC_RPORT_DBG(rdata, "work restart\n");
356                                 fc_rport_enter_flogi(rdata);
357                                 mutex_unlock(&rdata->rp_mutex);
358                         } else {
359                                 FC_RPORT_DBG(rdata, "work delete\n");
360                                 list_del_rcu(&rdata->peers);
361                                 mutex_unlock(&rdata->rp_mutex);
362                                 kref_put(&rdata->kref, lport->tt.rport_destroy);
363                         }
364                 } else {
365                         /*
366                          * Re-open for events.  Reissue READY event if ready.
367                          */
368                         rdata->event = RPORT_EV_NONE;
369                         if (rdata->rp_state == RPORT_ST_READY)
370                                 fc_rport_enter_ready(rdata);
371                         mutex_unlock(&rdata->rp_mutex);
372                 }
373                 mutex_unlock(&lport->disc.disc_mutex);
374                 break;
375
376         default:
377                 mutex_unlock(&rdata->rp_mutex);
378                 break;
379         }
380 }
381
382 /**
383  * fc_rport_login() - Start the remote port login state machine
384  * @rdata: The remote port to be logged in to
385  *
386  * Locking Note: Called without the rport lock held. This
387  * function will hold the rport lock, call an _enter_*
388  * function and then unlock the rport.
389  *
390  * This indicates the intent to be logged into the remote port.
391  * If it appears we are already logged in, ADISC is used to verify
392  * the setup.
393  */
394 static int fc_rport_login(struct fc_rport_priv *rdata)
395 {
396         mutex_lock(&rdata->rp_mutex);
397
398         rdata->flags |= FC_RP_STARTED;
399         switch (rdata->rp_state) {
400         case RPORT_ST_READY:
401                 FC_RPORT_DBG(rdata, "ADISC port\n");
402                 fc_rport_enter_adisc(rdata);
403                 break;
404         case RPORT_ST_DELETE:
405                 FC_RPORT_DBG(rdata, "Restart deleted port\n");
406                 break;
407         default:
408                 FC_RPORT_DBG(rdata, "Login to port\n");
409                 fc_rport_enter_flogi(rdata);
410                 break;
411         }
412         mutex_unlock(&rdata->rp_mutex);
413
414         return 0;
415 }
416
417 /**
418  * fc_rport_enter_delete() - Schedule a remote port to be deleted
419  * @rdata: The remote port to be deleted
420  * @event: The event to report as the reason for deletion
421  *
422  * Locking Note: Called with the rport lock held.
423  *
424  * Allow state change into DELETE only once.
425  *
426  * Call queue_work only if there's no event already pending.
427  * Set the new event so that the old pending event will not occur.
428  * Since we have the mutex, even if fc_rport_work() is already started,
429  * it'll see the new event.
430  */
431 static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
432                                   enum fc_rport_event event)
433 {
434         if (rdata->rp_state == RPORT_ST_DELETE)
435                 return;
436
437         FC_RPORT_DBG(rdata, "Delete port\n");
438
439         fc_rport_state_enter(rdata, RPORT_ST_DELETE);
440
441         if (rdata->event == RPORT_EV_NONE)
442                 queue_work(rport_event_queue, &rdata->event_work);
443         rdata->event = event;
444 }
445
446 /**
447  * fc_rport_logoff() - Logoff and remove a remote port
448  * @rdata: The remote port to be logged off of
449  *
450  * Locking Note: Called without the rport lock held. This
451  * function will hold the rport lock, call an _enter_*
452  * function and then unlock the rport.
453  */
454 static int fc_rport_logoff(struct fc_rport_priv *rdata)
455 {
456         mutex_lock(&rdata->rp_mutex);
457
458         FC_RPORT_DBG(rdata, "Remove port\n");
459
460         rdata->flags &= ~FC_RP_STARTED;
461         if (rdata->rp_state == RPORT_ST_DELETE) {
462                 FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n");
463                 goto out;
464         }
465         fc_rport_enter_logo(rdata);
466
467         /*
468          * Change the state to Delete so that we discard
469          * the response.
470          */
471         fc_rport_enter_delete(rdata, RPORT_EV_STOP);
472 out:
473         mutex_unlock(&rdata->rp_mutex);
474         return 0;
475 }
476
477 /**
478  * fc_rport_enter_ready() - Transition to the RPORT_ST_READY state
479  * @rdata: The remote port that is ready
480  *
481  * Locking Note: The rport lock is expected to be held before calling
482  * this routine.
483  */
484 static void fc_rport_enter_ready(struct fc_rport_priv *rdata)
485 {
486         fc_rport_state_enter(rdata, RPORT_ST_READY);
487
488         FC_RPORT_DBG(rdata, "Port is Ready\n");
489
490         if (rdata->event == RPORT_EV_NONE)
491                 queue_work(rport_event_queue, &rdata->event_work);
492         rdata->event = RPORT_EV_READY;
493 }
494
495 /**
496  * fc_rport_timeout() - Handler for the retry_work timer
497  * @work: Handle to the remote port that has timed out
498  *
499  * Locking Note: Called without the rport lock held. This
500  * function will hold the rport lock, call an _enter_*
501  * function and then unlock the rport.
502  */
503 static void fc_rport_timeout(struct work_struct *work)
504 {
505         struct fc_rport_priv *rdata =
506                 container_of(work, struct fc_rport_priv, retry_work.work);
507
508         mutex_lock(&rdata->rp_mutex);
509
510         switch (rdata->rp_state) {
511         case RPORT_ST_FLOGI:
512                 fc_rport_enter_flogi(rdata);
513                 break;
514         case RPORT_ST_PLOGI:
515                 fc_rport_enter_plogi(rdata);
516                 break;
517         case RPORT_ST_PRLI:
518                 fc_rport_enter_prli(rdata);
519                 break;
520         case RPORT_ST_RTV:
521                 fc_rport_enter_rtv(rdata);
522                 break;
523         case RPORT_ST_ADISC:
524                 fc_rport_enter_adisc(rdata);
525                 break;
526         case RPORT_ST_PLOGI_WAIT:
527         case RPORT_ST_READY:
528         case RPORT_ST_INIT:
529         case RPORT_ST_DELETE:
530                 break;
531         }
532
533         mutex_unlock(&rdata->rp_mutex);
534 }
535
536 /**
537  * fc_rport_error() - Error handler, called once retries have been exhausted
538  * @rdata: The remote port the error is happened on
539  * @fp:    The error code encapsulated in a frame pointer
540  *
541  * Locking Note: The rport lock is expected to be held before
542  * calling this routine
543  */
544 static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp)
545 {
546         FC_RPORT_DBG(rdata, "Error %ld in state %s, retries %d\n",
547                      IS_ERR(fp) ? -PTR_ERR(fp) : 0,
548                      fc_rport_state(rdata), rdata->retries);
549
550         switch (rdata->rp_state) {
551         case RPORT_ST_FLOGI:
552         case RPORT_ST_PLOGI:
553                 rdata->flags &= ~FC_RP_STARTED;
554                 fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
555                 break;
556         case RPORT_ST_RTV:
557                 fc_rport_enter_ready(rdata);
558                 break;
559         case RPORT_ST_PRLI:
560         case RPORT_ST_ADISC:
561                 fc_rport_enter_logo(rdata);
562                 break;
563         case RPORT_ST_PLOGI_WAIT:
564         case RPORT_ST_DELETE:
565         case RPORT_ST_READY:
566         case RPORT_ST_INIT:
567                 break;
568         }
569 }
570
571 /**
572  * fc_rport_error_retry() - Handler for remote port state retries
573  * @rdata: The remote port whose state is to be retried
574  * @fp:    The error code encapsulated in a frame pointer
575  *
576  * If the error was an exchange timeout retry immediately,
577  * otherwise wait for E_D_TOV.
578  *
579  * Locking Note: The rport lock is expected to be held before
580  * calling this routine
581  */
582 static void fc_rport_error_retry(struct fc_rport_priv *rdata,
583                                  struct fc_frame *fp)
584 {
585         unsigned long delay = msecs_to_jiffies(FC_DEF_E_D_TOV);
586
587         /* make sure this isn't an FC_EX_CLOSED error, never retry those */
588         if (PTR_ERR(fp) == -FC_EX_CLOSED)
589                 goto out;
590
591         if (rdata->retries < rdata->local_port->max_rport_retry_count) {
592                 FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n",
593                              PTR_ERR(fp), fc_rport_state(rdata));
594                 rdata->retries++;
595                 /* no additional delay on exchange timeouts */
596                 if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
597                         delay = 0;
598                 schedule_delayed_work(&rdata->retry_work, delay);
599                 return;
600         }
601
602 out:
603         fc_rport_error(rdata, fp);
604 }
605
606 /**
607  * fc_rport_login_complete() - Handle parameters and completion of p-mp login.
608  * @rdata:  The remote port which we logged into or which logged into us.
609  * @fp:     The FLOGI or PLOGI request or response frame
610  *
611  * Returns non-zero error if a problem is detected with the frame.
612  * Does not free the frame.
613  *
614  * This is only used in point-to-multipoint mode for FIP currently.
615  */
616 static int fc_rport_login_complete(struct fc_rport_priv *rdata,
617                                    struct fc_frame *fp)
618 {
619         struct fc_lport *lport = rdata->local_port;
620         struct fc_els_flogi *flogi;
621         unsigned int e_d_tov;
622         u16 csp_flags;
623
624         flogi = fc_frame_payload_get(fp, sizeof(*flogi));
625         if (!flogi)
626                 return -EINVAL;
627
628         csp_flags = ntohs(flogi->fl_csp.sp_features);
629
630         if (fc_frame_payload_op(fp) == ELS_FLOGI) {
631                 if (csp_flags & FC_SP_FT_FPORT) {
632                         FC_RPORT_DBG(rdata, "Fabric bit set in FLOGI\n");
633                         return -EINVAL;
634                 }
635         } else {
636
637                 /*
638                  * E_D_TOV is not valid on an incoming FLOGI request.
639                  */
640                 e_d_tov = ntohl(flogi->fl_csp.sp_e_d_tov);
641                 if (csp_flags & FC_SP_FT_EDTR)
642                         e_d_tov /= 1000000;
643                 if (e_d_tov > rdata->e_d_tov)
644                         rdata->e_d_tov = e_d_tov;
645         }
646         rdata->maxframe_size = fc_plogi_get_maxframe(flogi, lport->mfs);
647         return 0;
648 }
649
650 /**
651  * fc_rport_flogi_resp() - Handle response to FLOGI request for p-mp mode
652  * @sp:     The sequence that the FLOGI was on
653  * @fp:     The FLOGI response frame
654  * @rp_arg: The remote port that received the FLOGI response
655  */
656 static void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
657                                 void *rp_arg)
658 {
659         struct fc_rport_priv *rdata = rp_arg;
660         struct fc_lport *lport = rdata->local_port;
661         struct fc_els_flogi *flogi;
662         unsigned int r_a_tov;
663
664         FC_RPORT_DBG(rdata, "Received a FLOGI %s\n", fc_els_resp_type(fp));
665
666         if (fp == ERR_PTR(-FC_EX_CLOSED))
667                 goto put;
668
669         mutex_lock(&rdata->rp_mutex);
670
671         if (rdata->rp_state != RPORT_ST_FLOGI) {
672                 FC_RPORT_DBG(rdata, "Received a FLOGI response, but in state "
673                              "%s\n", fc_rport_state(rdata));
674                 if (IS_ERR(fp))
675                         goto err;
676                 goto out;
677         }
678
679         if (IS_ERR(fp)) {
680                 fc_rport_error(rdata, fp);
681                 goto err;
682         }
683
684         if (fc_frame_payload_op(fp) != ELS_LS_ACC)
685                 goto bad;
686         if (fc_rport_login_complete(rdata, fp))
687                 goto bad;
688
689         flogi = fc_frame_payload_get(fp, sizeof(*flogi));
690         if (!flogi)
691                 goto bad;
692         r_a_tov = ntohl(flogi->fl_csp.sp_r_a_tov);
693         if (r_a_tov > rdata->r_a_tov)
694                 rdata->r_a_tov = r_a_tov;
695
696         if (rdata->ids.port_name < lport->wwpn)
697                 fc_rport_enter_plogi(rdata);
698         else
699                 fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
700 out:
701         fc_frame_free(fp);
702 err:
703         mutex_unlock(&rdata->rp_mutex);
704 put:
705         kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
706         return;
707 bad:
708         FC_RPORT_DBG(rdata, "Bad FLOGI response\n");
709         fc_rport_error_retry(rdata, fp);
710         goto out;
711 }
712
713 /**
714  * fc_rport_enter_flogi() - Send a FLOGI request to the remote port for p-mp
715  * @rdata: The remote port to send a FLOGI to
716  *
717  * Locking Note: The rport lock is expected to be held before calling
718  * this routine.
719  */
720 static void fc_rport_enter_flogi(struct fc_rport_priv *rdata)
721 {
722         struct fc_lport *lport = rdata->local_port;
723         struct fc_frame *fp;
724
725         if (!lport->point_to_multipoint)
726                 return fc_rport_enter_plogi(rdata);
727
728         FC_RPORT_DBG(rdata, "Entered FLOGI state from %s state\n",
729                      fc_rport_state(rdata));
730
731         fc_rport_state_enter(rdata, RPORT_ST_FLOGI);
732
733         fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
734         if (!fp)
735                 return fc_rport_error_retry(rdata, fp);
736
737         if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_FLOGI,
738                                   fc_rport_flogi_resp, rdata,
739                                   2 * lport->r_a_tov))
740                 fc_rport_error_retry(rdata, NULL);
741         else
742                 kref_get(&rdata->kref);
743 }
744
745 /**
746  * fc_rport_recv_flogi_req() - Handle Fabric Login (FLOGI) request in p-mp mode
747  * @lport: The local port that received the PLOGI request
748  * @rx_fp: The PLOGI request frame
749  */
750 static void fc_rport_recv_flogi_req(struct fc_lport *lport,
751                                     struct fc_frame *rx_fp)
752 {
753         struct fc_disc *disc;
754         struct fc_els_flogi *flp;
755         struct fc_rport_priv *rdata;
756         struct fc_frame *fp = rx_fp;
757         struct fc_seq_els_data rjt_data;
758         u32 sid;
759
760         sid = fc_frame_sid(fp);
761
762         FC_RPORT_ID_DBG(lport, sid, "Received FLOGI request\n");
763
764         disc = &lport->disc;
765         mutex_lock(&disc->disc_mutex);
766
767         if (!lport->point_to_multipoint) {
768                 rjt_data.reason = ELS_RJT_UNSUP;
769                 rjt_data.explan = ELS_EXPL_NONE;
770                 goto reject;
771         }
772
773         flp = fc_frame_payload_get(fp, sizeof(*flp));
774         if (!flp) {
775                 rjt_data.reason = ELS_RJT_LOGIC;
776                 rjt_data.explan = ELS_EXPL_INV_LEN;
777                 goto reject;
778         }
779
780         rdata = lport->tt.rport_lookup(lport, sid);
781         if (!rdata) {
782                 rjt_data.reason = ELS_RJT_FIP;
783                 rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR;
784                 goto reject;
785         }
786         mutex_lock(&rdata->rp_mutex);
787
788         FC_RPORT_DBG(rdata, "Received FLOGI in %s state\n",
789                      fc_rport_state(rdata));
790
791         switch (rdata->rp_state) {
792         case RPORT_ST_INIT:
793                 /*
794                  * If received the FLOGI request on RPORT which is INIT state
795                  * (means not transition to FLOGI either fc_rport timeout
796                  * function didn;t trigger or this end hasn;t received
797                  * beacon yet from other end. In that case only, allow RPORT
798                  * state machine to continue, otherwise fall through which
799                  * causes the code to send reject response.
800                  * NOTE; Not checking for FIP->state such as VNMP_UP or
801                  * VNMP_CLAIM because if FIP state is not one of those,
802                  * RPORT wouldn;t have created and 'rport_lookup' would have
803                  * failed anyway in that case.
804                  */
805                 if (lport->point_to_multipoint)
806                         break;
807         case RPORT_ST_DELETE:
808                 mutex_unlock(&rdata->rp_mutex);
809                 rjt_data.reason = ELS_RJT_FIP;
810                 rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR;
811                 goto reject;
812         case RPORT_ST_FLOGI:
813         case RPORT_ST_PLOGI_WAIT:
814         case RPORT_ST_PLOGI:
815                 break;
816         case RPORT_ST_PRLI:
817         case RPORT_ST_RTV:
818         case RPORT_ST_READY:
819         case RPORT_ST_ADISC:
820                 /*
821                  * Set the remote port to be deleted and to then restart.
822                  * This queues work to be sure exchanges are reset.
823                  */
824                 fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
825                 mutex_unlock(&rdata->rp_mutex);
826                 rjt_data.reason = ELS_RJT_BUSY;
827                 rjt_data.explan = ELS_EXPL_NONE;
828                 goto reject;
829         }
830         if (fc_rport_login_complete(rdata, fp)) {
831                 mutex_unlock(&rdata->rp_mutex);
832                 rjt_data.reason = ELS_RJT_LOGIC;
833                 rjt_data.explan = ELS_EXPL_NONE;
834                 goto reject;
835         }
836
837         fp = fc_frame_alloc(lport, sizeof(*flp));
838         if (!fp)
839                 goto out;
840
841         fc_flogi_fill(lport, fp);
842         flp = fc_frame_payload_get(fp, sizeof(*flp));
843         flp->fl_cmd = ELS_LS_ACC;
844
845         fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
846         lport->tt.frame_send(lport, fp);
847
848         if (rdata->ids.port_name < lport->wwpn)
849                 fc_rport_enter_plogi(rdata);
850         else
851                 fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
852 out:
853         mutex_unlock(&rdata->rp_mutex);
854         mutex_unlock(&disc->disc_mutex);
855         fc_frame_free(rx_fp);
856         return;
857
858 reject:
859         mutex_unlock(&disc->disc_mutex);
860         lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
861         fc_frame_free(rx_fp);
862 }
863
864 /**
865  * fc_rport_plogi_resp() - Handler for ELS PLOGI responses
866  * @sp:        The sequence the PLOGI is on
867  * @fp:        The PLOGI response frame
868  * @rdata_arg: The remote port that sent the PLOGI response
869  *
870  * Locking Note: This function will be called without the rport lock
871  * held, but it will lock, call an _enter_* function or fc_rport_error
872  * and then unlock the rport.
873  */
874 static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
875                                 void *rdata_arg)
876 {
877         struct fc_rport_priv *rdata = rdata_arg;
878         struct fc_lport *lport = rdata->local_port;
879         struct fc_els_flogi *plp = NULL;
880         u16 csp_seq;
881         u16 cssp_seq;
882         u8 op;
883
884         mutex_lock(&rdata->rp_mutex);
885
886         FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp));
887
888         if (rdata->rp_state != RPORT_ST_PLOGI) {
889                 FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state "
890                              "%s\n", fc_rport_state(rdata));
891                 if (IS_ERR(fp))
892                         goto err;
893                 goto out;
894         }
895
896         if (IS_ERR(fp)) {
897                 fc_rport_error_retry(rdata, fp);
898                 goto err;
899         }
900
901         op = fc_frame_payload_op(fp);
902         if (op == ELS_LS_ACC &&
903             (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
904                 rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn);
905                 rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn);
906
907                 /* save plogi response sp_features for further reference */
908                 rdata->sp_features = ntohs(plp->fl_csp.sp_features);
909
910                 if (lport->point_to_multipoint)
911                         fc_rport_login_complete(rdata, fp);
912                 csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
913                 cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq);
914                 if (cssp_seq < csp_seq)
915                         csp_seq = cssp_seq;
916                 rdata->max_seq = csp_seq;
917                 rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs);
918                 fc_rport_enter_prli(rdata);
919         } else
920                 fc_rport_error_retry(rdata, fp);
921
922 out:
923         fc_frame_free(fp);
924 err:
925         mutex_unlock(&rdata->rp_mutex);
926         kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
927 }
928
929 /**
930  * fc_rport_enter_plogi() - Send Port Login (PLOGI) request
931  * @rdata: The remote port to send a PLOGI to
932  *
933  * Locking Note: The rport lock is expected to be held before calling
934  * this routine.
935  */
936 static void fc_rport_enter_plogi(struct fc_rport_priv *rdata)
937 {
938         struct fc_lport *lport = rdata->local_port;
939         struct fc_frame *fp;
940
941         FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n",
942                      fc_rport_state(rdata));
943
944         fc_rport_state_enter(rdata, RPORT_ST_PLOGI);
945
946         rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
947         fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
948         if (!fp) {
949                 FC_RPORT_DBG(rdata, "%s frame alloc failed\n", __func__);
950                 fc_rport_error_retry(rdata, fp);
951                 return;
952         }
953         rdata->e_d_tov = lport->e_d_tov;
954
955         if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI,
956                                   fc_rport_plogi_resp, rdata,
957                                   2 * lport->r_a_tov))
958                 fc_rport_error_retry(rdata, NULL);
959         else
960                 kref_get(&rdata->kref);
961 }
962
963 /**
964  * fc_rport_prli_resp() - Process Login (PRLI) response handler
965  * @sp:        The sequence the PRLI response was on
966  * @fp:        The PRLI response frame
967  * @rdata_arg: The remote port that sent the PRLI response
968  *
969  * Locking Note: This function will be called without the rport lock
970  * held, but it will lock, call an _enter_* function or fc_rport_error
971  * and then unlock the rport.
972  */
973 static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
974                                void *rdata_arg)
975 {
976         struct fc_rport_priv *rdata = rdata_arg;
977         struct {
978                 struct fc_els_prli prli;
979                 struct fc_els_spp spp;
980         } *pp;
981         struct fc_els_spp temp_spp;
982         struct fc4_prov *prov;
983         u32 roles = FC_RPORT_ROLE_UNKNOWN;
984         u32 fcp_parm = 0;
985         u8 op;
986         u8 resp_code = 0;
987
988         mutex_lock(&rdata->rp_mutex);
989
990         FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp));
991
992         if (rdata->rp_state != RPORT_ST_PRLI) {
993                 FC_RPORT_DBG(rdata, "Received a PRLI response, but in state "
994                              "%s\n", fc_rport_state(rdata));
995                 if (IS_ERR(fp))
996                         goto err;
997                 goto out;
998         }
999
1000         if (IS_ERR(fp)) {
1001                 fc_rport_error_retry(rdata, fp);
1002                 goto err;
1003         }
1004
1005         /* reinitialize remote port roles */
1006         rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
1007
1008         op = fc_frame_payload_op(fp);
1009         if (op == ELS_LS_ACC) {
1010                 pp = fc_frame_payload_get(fp, sizeof(*pp));
1011                 if (!pp)
1012                         goto out;
1013
1014                 resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
1015                 FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x\n",
1016                              pp->spp.spp_flags);
1017                 rdata->spp_type = pp->spp.spp_type;
1018                 if (resp_code != FC_SPP_RESP_ACK) {
1019                         if (resp_code == FC_SPP_RESP_CONF)
1020                                 fc_rport_error(rdata, fp);
1021                         else
1022                                 fc_rport_error_retry(rdata, fp);
1023                         goto out;
1024                 }
1025                 if (pp->prli.prli_spp_len < sizeof(pp->spp))
1026                         goto out;
1027
1028                 fcp_parm = ntohl(pp->spp.spp_params);
1029                 if (fcp_parm & FCP_SPPF_RETRY)
1030                         rdata->flags |= FC_RP_FLAGS_RETRY;
1031                 if (fcp_parm & FCP_SPPF_CONF_COMPL)
1032                         rdata->flags |= FC_RP_FLAGS_CONF_REQ;
1033
1034                 prov = fc_passive_prov[FC_TYPE_FCP];
1035                 if (prov) {
1036                         memset(&temp_spp, 0, sizeof(temp_spp));
1037                         prov->prli(rdata, pp->prli.prli_spp_len,
1038                                    &pp->spp, &temp_spp);
1039                 }
1040
1041                 rdata->supported_classes = FC_COS_CLASS3;
1042                 if (fcp_parm & FCP_SPPF_INIT_FCN)
1043                         roles |= FC_RPORT_ROLE_FCP_INITIATOR;
1044                 if (fcp_parm & FCP_SPPF_TARG_FCN)
1045                         roles |= FC_RPORT_ROLE_FCP_TARGET;
1046
1047                 rdata->ids.roles = roles;
1048                 fc_rport_enter_rtv(rdata);
1049
1050         } else {
1051                 FC_RPORT_DBG(rdata, "Bad ELS response for PRLI command\n");
1052                 fc_rport_error_retry(rdata, fp);
1053         }
1054
1055 out:
1056         fc_frame_free(fp);
1057 err:
1058         mutex_unlock(&rdata->rp_mutex);
1059         kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
1060 }
1061
1062 /**
1063  * fc_rport_enter_prli() - Send Process Login (PRLI) request
1064  * @rdata: The remote port to send the PRLI request to
1065  *
1066  * Locking Note: The rport lock is expected to be held before calling
1067  * this routine.
1068  */
1069 static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
1070 {
1071         struct fc_lport *lport = rdata->local_port;
1072         struct {
1073                 struct fc_els_prli prli;
1074                 struct fc_els_spp spp;
1075         } *pp;
1076         struct fc_frame *fp;
1077         struct fc4_prov *prov;
1078
1079         /*
1080          * If the rport is one of the well known addresses
1081          * we skip PRLI and RTV and go straight to READY.
1082          */
1083         if (rdata->ids.port_id >= FC_FID_DOM_MGR) {
1084                 fc_rport_enter_ready(rdata);
1085                 return;
1086         }
1087
1088         FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n",
1089                      fc_rport_state(rdata));
1090
1091         fc_rport_state_enter(rdata, RPORT_ST_PRLI);
1092
1093         fp = fc_frame_alloc(lport, sizeof(*pp));
1094         if (!fp) {
1095                 fc_rport_error_retry(rdata, fp);
1096                 return;
1097         }
1098
1099         fc_prli_fill(lport, fp);
1100
1101         prov = fc_passive_prov[FC_TYPE_FCP];
1102         if (prov) {
1103                 pp = fc_frame_payload_get(fp, sizeof(*pp));
1104                 prov->prli(rdata, sizeof(pp->spp), NULL, &pp->spp);
1105         }
1106
1107         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rdata->ids.port_id,
1108                        fc_host_port_id(lport->host), FC_TYPE_ELS,
1109                        FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1110
1111         if (!lport->tt.exch_seq_send(lport, fp, fc_rport_prli_resp,
1112                                     NULL, rdata, 2 * lport->r_a_tov))
1113                 fc_rport_error_retry(rdata, NULL);
1114         else
1115                 kref_get(&rdata->kref);
1116 }
1117
1118 /**
1119  * fc_rport_els_rtv_resp() - Handler for Request Timeout Value (RTV) responses
1120  * @sp:        The sequence the RTV was on
1121  * @fp:        The RTV response frame
1122  * @rdata_arg: The remote port that sent the RTV response
1123  *
1124  * Many targets don't seem to support this.
1125  *
1126  * Locking Note: This function will be called without the rport lock
1127  * held, but it will lock, call an _enter_* function or fc_rport_error
1128  * and then unlock the rport.
1129  */
1130 static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
1131                               void *rdata_arg)
1132 {
1133         struct fc_rport_priv *rdata = rdata_arg;
1134         u8 op;
1135
1136         mutex_lock(&rdata->rp_mutex);
1137
1138         FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp));
1139
1140         if (rdata->rp_state != RPORT_ST_RTV) {
1141                 FC_RPORT_DBG(rdata, "Received a RTV response, but in state "
1142                              "%s\n", fc_rport_state(rdata));
1143                 if (IS_ERR(fp))
1144                         goto err;
1145                 goto out;
1146         }
1147
1148         if (IS_ERR(fp)) {
1149                 fc_rport_error(rdata, fp);
1150                 goto err;
1151         }
1152
1153         op = fc_frame_payload_op(fp);
1154         if (op == ELS_LS_ACC) {
1155                 struct fc_els_rtv_acc *rtv;
1156                 u32 toq;
1157                 u32 tov;
1158
1159                 rtv = fc_frame_payload_get(fp, sizeof(*rtv));
1160                 if (rtv) {
1161                         toq = ntohl(rtv->rtv_toq);
1162                         tov = ntohl(rtv->rtv_r_a_tov);
1163                         if (tov == 0)
1164                                 tov = 1;
1165                         rdata->r_a_tov = tov;
1166                         tov = ntohl(rtv->rtv_e_d_tov);
1167                         if (toq & FC_ELS_RTV_EDRES)
1168                                 tov /= 1000000;
1169                         if (tov == 0)
1170                                 tov = 1;
1171                         rdata->e_d_tov = tov;
1172                 }
1173         }
1174
1175         fc_rport_enter_ready(rdata);
1176
1177 out:
1178         fc_frame_free(fp);
1179 err:
1180         mutex_unlock(&rdata->rp_mutex);
1181         kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
1182 }
1183
1184 /**
1185  * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request
1186  * @rdata: The remote port to send the RTV request to
1187  *
1188  * Locking Note: The rport lock is expected to be held before calling
1189  * this routine.
1190  */
1191 static void fc_rport_enter_rtv(struct fc_rport_priv *rdata)
1192 {
1193         struct fc_frame *fp;
1194         struct fc_lport *lport = rdata->local_port;
1195
1196         FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n",
1197                      fc_rport_state(rdata));
1198
1199         fc_rport_state_enter(rdata, RPORT_ST_RTV);
1200
1201         fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
1202         if (!fp) {
1203                 fc_rport_error_retry(rdata, fp);
1204                 return;
1205         }
1206
1207         if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV,
1208                                   fc_rport_rtv_resp, rdata,
1209                                   2 * lport->r_a_tov))
1210                 fc_rport_error_retry(rdata, NULL);
1211         else
1212                 kref_get(&rdata->kref);
1213 }
1214
1215 /**
1216  * fc_rport_logo_resp() - Handler for logout (LOGO) responses
1217  * @sp:        The sequence the LOGO was on
1218  * @fp:        The LOGO response frame
1219  * @lport_arg: The local port
1220  */
1221 static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
1222                                void *lport_arg)
1223 {
1224         struct fc_lport *lport = lport_arg;
1225
1226         FC_RPORT_ID_DBG(lport, fc_seq_exch(sp)->did,
1227                         "Received a LOGO %s\n", fc_els_resp_type(fp));
1228         if (IS_ERR(fp))
1229                 return;
1230         fc_frame_free(fp);
1231 }
1232
1233 /**
1234  * fc_rport_enter_logo() - Send a logout (LOGO) request
1235  * @rdata: The remote port to send the LOGO request to
1236  *
1237  * Locking Note: The rport lock is expected to be held before calling
1238  * this routine.
1239  */
1240 static void fc_rport_enter_logo(struct fc_rport_priv *rdata)
1241 {
1242         struct fc_lport *lport = rdata->local_port;
1243         struct fc_frame *fp;
1244
1245         FC_RPORT_DBG(rdata, "Port sending LOGO from %s state\n",
1246                      fc_rport_state(rdata));
1247
1248         fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
1249         if (!fp)
1250                 return;
1251         (void)lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO,
1252                                    fc_rport_logo_resp, lport, 0);
1253 }
1254
1255 /**
1256  * fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses
1257  * @sp:        The sequence the ADISC response was on
1258  * @fp:        The ADISC response frame
1259  * @rdata_arg: The remote port that sent the ADISC response
1260  *
1261  * Locking Note: This function will be called without the rport lock
1262  * held, but it will lock, call an _enter_* function or fc_rport_error
1263  * and then unlock the rport.
1264  */
1265 static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
1266                                 void *rdata_arg)
1267 {
1268         struct fc_rport_priv *rdata = rdata_arg;
1269         struct fc_els_adisc *adisc;
1270         u8 op;
1271
1272         mutex_lock(&rdata->rp_mutex);
1273
1274         FC_RPORT_DBG(rdata, "Received a ADISC response\n");
1275
1276         if (rdata->rp_state != RPORT_ST_ADISC) {
1277                 FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n",
1278                              fc_rport_state(rdata));
1279                 if (IS_ERR(fp))
1280                         goto err;
1281                 goto out;
1282         }
1283
1284         if (IS_ERR(fp)) {
1285                 fc_rport_error(rdata, fp);
1286                 goto err;
1287         }
1288
1289         /*
1290          * If address verification failed.  Consider us logged out of the rport.
1291          * Since the rport is still in discovery, we want to be
1292          * logged in, so go to PLOGI state.  Otherwise, go back to READY.
1293          */
1294         op = fc_frame_payload_op(fp);
1295         adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1296         if (op != ELS_LS_ACC || !adisc ||
1297             ntoh24(adisc->adisc_port_id) != rdata->ids.port_id ||
1298             get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name ||
1299             get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) {
1300                 FC_RPORT_DBG(rdata, "ADISC error or mismatch\n");
1301                 fc_rport_enter_flogi(rdata);
1302         } else {
1303                 FC_RPORT_DBG(rdata, "ADISC OK\n");
1304                 fc_rport_enter_ready(rdata);
1305         }
1306 out:
1307         fc_frame_free(fp);
1308 err:
1309         mutex_unlock(&rdata->rp_mutex);
1310         kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
1311 }
1312
1313 /**
1314  * fc_rport_enter_adisc() - Send Address Discover (ADISC) request
1315  * @rdata: The remote port to send the ADISC request to
1316  *
1317  * Locking Note: The rport lock is expected to be held before calling
1318  * this routine.
1319  */
1320 static void fc_rport_enter_adisc(struct fc_rport_priv *rdata)
1321 {
1322         struct fc_lport *lport = rdata->local_port;
1323         struct fc_frame *fp;
1324
1325         FC_RPORT_DBG(rdata, "sending ADISC from %s state\n",
1326                      fc_rport_state(rdata));
1327
1328         fc_rport_state_enter(rdata, RPORT_ST_ADISC);
1329
1330         fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc));
1331         if (!fp) {
1332                 fc_rport_error_retry(rdata, fp);
1333                 return;
1334         }
1335         if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
1336                                   fc_rport_adisc_resp, rdata,
1337                                   2 * lport->r_a_tov))
1338                 fc_rport_error_retry(rdata, NULL);
1339         else
1340                 kref_get(&rdata->kref);
1341 }
1342
1343 /**
1344  * fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests
1345  * @rdata: The remote port that sent the ADISC request
1346  * @in_fp: The ADISC request frame
1347  *
1348  * Locking Note:  Called with the lport and rport locks held.
1349  */
1350 static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata,
1351                                     struct fc_frame *in_fp)
1352 {
1353         struct fc_lport *lport = rdata->local_port;
1354         struct fc_frame *fp;
1355         struct fc_els_adisc *adisc;
1356         struct fc_seq_els_data rjt_data;
1357
1358         FC_RPORT_DBG(rdata, "Received ADISC request\n");
1359
1360         adisc = fc_frame_payload_get(in_fp, sizeof(*adisc));
1361         if (!adisc) {
1362                 rjt_data.reason = ELS_RJT_PROT;
1363                 rjt_data.explan = ELS_EXPL_INV_LEN;
1364                 lport->tt.seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data);
1365                 goto drop;
1366         }
1367
1368         fp = fc_frame_alloc(lport, sizeof(*adisc));
1369         if (!fp)
1370                 goto drop;
1371         fc_adisc_fill(lport, fp);
1372         adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1373         adisc->adisc_cmd = ELS_LS_ACC;
1374         fc_fill_reply_hdr(fp, in_fp, FC_RCTL_ELS_REP, 0);
1375         lport->tt.frame_send(lport, fp);
1376 drop:
1377         fc_frame_free(in_fp);
1378 }
1379
1380 /**
1381  * fc_rport_recv_rls_req() - Handle received Read Link Status request
1382  * @rdata: The remote port that sent the RLS request
1383  * @rx_fp: The PRLI request frame
1384  *
1385  * Locking Note: The rport lock is expected to be held before calling
1386  * this function.
1387  */
1388 static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata,
1389                                   struct fc_frame *rx_fp)
1390
1391 {
1392         struct fc_lport *lport = rdata->local_port;
1393         struct fc_frame *fp;
1394         struct fc_els_rls *rls;
1395         struct fc_els_rls_resp *rsp;
1396         struct fc_els_lesb *lesb;
1397         struct fc_seq_els_data rjt_data;
1398         struct fc_host_statistics *hst;
1399
1400         FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n",
1401                      fc_rport_state(rdata));
1402
1403         rls = fc_frame_payload_get(rx_fp, sizeof(*rls));
1404         if (!rls) {
1405                 rjt_data.reason = ELS_RJT_PROT;
1406                 rjt_data.explan = ELS_EXPL_INV_LEN;
1407                 goto out_rjt;
1408         }
1409
1410         fp = fc_frame_alloc(lport, sizeof(*rsp));
1411         if (!fp) {
1412                 rjt_data.reason = ELS_RJT_UNAB;
1413                 rjt_data.explan = ELS_EXPL_INSUF_RES;
1414                 goto out_rjt;
1415         }
1416
1417         rsp = fc_frame_payload_get(fp, sizeof(*rsp));
1418         memset(rsp, 0, sizeof(*rsp));
1419         rsp->rls_cmd = ELS_LS_ACC;
1420         lesb = &rsp->rls_lesb;
1421         if (lport->tt.get_lesb) {
1422                 /* get LESB from LLD if it supports it */
1423                 lport->tt.get_lesb(lport, lesb);
1424         } else {
1425                 fc_get_host_stats(lport->host);
1426                 hst = &lport->host_stats;
1427                 lesb->lesb_link_fail = htonl(hst->link_failure_count);
1428                 lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count);
1429                 lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count);
1430                 lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count);
1431                 lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count);
1432                 lesb->lesb_inv_crc = htonl(hst->invalid_crc_count);
1433         }
1434
1435         fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1436         lport->tt.frame_send(lport, fp);
1437         goto out;
1438
1439 out_rjt:
1440         lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1441 out:
1442         fc_frame_free(rx_fp);
1443 }
1444
1445 /**
1446  * fc_rport_recv_els_req() - Handler for validated ELS requests
1447  * @lport: The local port that received the ELS request
1448  * @fp:    The ELS request frame
1449  *
1450  * Handle incoming ELS requests that require port login.
1451  * The ELS opcode has already been validated by the caller.
1452  *
1453  * Locking Note: Called with the lport lock held.
1454  */
1455 static void fc_rport_recv_els_req(struct fc_lport *lport, struct fc_frame *fp)
1456 {
1457         struct fc_rport_priv *rdata;
1458         struct fc_seq_els_data els_data;
1459
1460         mutex_lock(&lport->disc.disc_mutex);
1461         rdata = lport->tt.rport_lookup(lport, fc_frame_sid(fp));
1462         if (!rdata) {
1463                 mutex_unlock(&lport->disc.disc_mutex);
1464                 goto reject;
1465         }
1466         mutex_lock(&rdata->rp_mutex);
1467         mutex_unlock(&lport->disc.disc_mutex);
1468
1469         switch (rdata->rp_state) {
1470         case RPORT_ST_PRLI:
1471         case RPORT_ST_RTV:
1472         case RPORT_ST_READY:
1473         case RPORT_ST_ADISC:
1474                 break;
1475         default:
1476                 mutex_unlock(&rdata->rp_mutex);
1477                 goto reject;
1478         }
1479
1480         switch (fc_frame_payload_op(fp)) {
1481         case ELS_PRLI:
1482                 fc_rport_recv_prli_req(rdata, fp);
1483                 break;
1484         case ELS_PRLO:
1485                 fc_rport_recv_prlo_req(rdata, fp);
1486                 break;
1487         case ELS_ADISC:
1488                 fc_rport_recv_adisc_req(rdata, fp);
1489                 break;
1490         case ELS_RRQ:
1491                 lport->tt.seq_els_rsp_send(fp, ELS_RRQ, NULL);
1492                 fc_frame_free(fp);
1493                 break;
1494         case ELS_REC:
1495                 lport->tt.seq_els_rsp_send(fp, ELS_REC, NULL);
1496                 fc_frame_free(fp);
1497                 break;
1498         case ELS_RLS:
1499                 fc_rport_recv_rls_req(rdata, fp);
1500                 break;
1501         default:
1502                 fc_frame_free(fp);      /* can't happen */
1503                 break;
1504         }
1505
1506         mutex_unlock(&rdata->rp_mutex);
1507         return;
1508
1509 reject:
1510         els_data.reason = ELS_RJT_UNAB;
1511         els_data.explan = ELS_EXPL_PLOGI_REQD;
1512         lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1513         fc_frame_free(fp);
1514 }
1515
1516 /**
1517  * fc_rport_recv_req() - Handler for requests
1518  * @lport: The local port that received the request
1519  * @fp:    The request frame
1520  *
1521  * Locking Note: Called with the lport lock held.
1522  */
1523 static void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
1524 {
1525         struct fc_seq_els_data els_data;
1526
1527         /*
1528          * Handle FLOGI, PLOGI and LOGO requests separately, since they
1529          * don't require prior login.
1530          * Check for unsupported opcodes first and reject them.
1531          * For some ops, it would be incorrect to reject with "PLOGI required".
1532          */
1533         switch (fc_frame_payload_op(fp)) {
1534         case ELS_FLOGI:
1535                 fc_rport_recv_flogi_req(lport, fp);
1536                 break;
1537         case ELS_PLOGI:
1538                 fc_rport_recv_plogi_req(lport, fp);
1539                 break;
1540         case ELS_LOGO:
1541                 fc_rport_recv_logo_req(lport, fp);
1542                 break;
1543         case ELS_PRLI:
1544         case ELS_PRLO:
1545         case ELS_ADISC:
1546         case ELS_RRQ:
1547         case ELS_REC:
1548         case ELS_RLS:
1549                 fc_rport_recv_els_req(lport, fp);
1550                 break;
1551         default:
1552                 els_data.reason = ELS_RJT_UNSUP;
1553                 els_data.explan = ELS_EXPL_NONE;
1554                 lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1555                 fc_frame_free(fp);
1556                 break;
1557         }
1558 }
1559
1560 /**
1561  * fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests
1562  * @lport: The local port that received the PLOGI request
1563  * @rx_fp: The PLOGI request frame
1564  *
1565  * Locking Note: The rport lock is held before calling this function.
1566  */
1567 static void fc_rport_recv_plogi_req(struct fc_lport *lport,
1568                                     struct fc_frame *rx_fp)
1569 {
1570         struct fc_disc *disc;
1571         struct fc_rport_priv *rdata;
1572         struct fc_frame *fp = rx_fp;
1573         struct fc_els_flogi *pl;
1574         struct fc_seq_els_data rjt_data;
1575         u32 sid;
1576
1577         sid = fc_frame_sid(fp);
1578
1579         FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n");
1580
1581         pl = fc_frame_payload_get(fp, sizeof(*pl));
1582         if (!pl) {
1583                 FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n");
1584                 rjt_data.reason = ELS_RJT_PROT;
1585                 rjt_data.explan = ELS_EXPL_INV_LEN;
1586                 goto reject;
1587         }
1588
1589         disc = &lport->disc;
1590         mutex_lock(&disc->disc_mutex);
1591         rdata = lport->tt.rport_create(lport, sid);
1592         if (!rdata) {
1593                 mutex_unlock(&disc->disc_mutex);
1594                 rjt_data.reason = ELS_RJT_UNAB;
1595                 rjt_data.explan = ELS_EXPL_INSUF_RES;
1596                 goto reject;
1597         }
1598
1599         mutex_lock(&rdata->rp_mutex);
1600         mutex_unlock(&disc->disc_mutex);
1601
1602         rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn);
1603         rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn);
1604
1605         /*
1606          * If the rport was just created, possibly due to the incoming PLOGI,
1607          * set the state appropriately and accept the PLOGI.
1608          *
1609          * If we had also sent a PLOGI, and if the received PLOGI is from a
1610          * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason
1611          * "command already in progress".
1612          *
1613          * XXX TBD: If the session was ready before, the PLOGI should result in
1614          * all outstanding exchanges being reset.
1615          */
1616         switch (rdata->rp_state) {
1617         case RPORT_ST_INIT:
1618                 FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n");
1619                 break;
1620         case RPORT_ST_PLOGI_WAIT:
1621                 FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI_WAIT state\n");
1622                 break;
1623         case RPORT_ST_PLOGI:
1624                 FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n");
1625                 if (rdata->ids.port_name < lport->wwpn) {
1626                         mutex_unlock(&rdata->rp_mutex);
1627                         rjt_data.reason = ELS_RJT_INPROG;
1628                         rjt_data.explan = ELS_EXPL_NONE;
1629                         goto reject;
1630                 }
1631                 break;
1632         case RPORT_ST_PRLI:
1633         case RPORT_ST_RTV:
1634         case RPORT_ST_READY:
1635         case RPORT_ST_ADISC:
1636                 FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
1637                              "- ignored for now\n", rdata->rp_state);
1638                 /* XXX TBD - should reset */
1639                 break;
1640         case RPORT_ST_FLOGI:
1641         case RPORT_ST_DELETE:
1642                 FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n",
1643                              fc_rport_state(rdata));
1644                 mutex_unlock(&rdata->rp_mutex);
1645                 rjt_data.reason = ELS_RJT_BUSY;
1646                 rjt_data.explan = ELS_EXPL_NONE;
1647                 goto reject;
1648         }
1649
1650         /*
1651          * Get session payload size from incoming PLOGI.
1652          */
1653         rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs);
1654
1655         /*
1656          * Send LS_ACC.  If this fails, the originator should retry.
1657          */
1658         fp = fc_frame_alloc(lport, sizeof(*pl));
1659         if (!fp)
1660                 goto out;
1661
1662         fc_plogi_fill(lport, fp, ELS_LS_ACC);
1663         fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1664         lport->tt.frame_send(lport, fp);
1665         fc_rport_enter_prli(rdata);
1666 out:
1667         mutex_unlock(&rdata->rp_mutex);
1668         fc_frame_free(rx_fp);
1669         return;
1670
1671 reject:
1672         lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &rjt_data);
1673         fc_frame_free(fp);
1674 }
1675
1676 /**
1677  * fc_rport_recv_prli_req() - Handler for process login (PRLI) requests
1678  * @rdata: The remote port that sent the PRLI request
1679  * @rx_fp: The PRLI request frame
1680  *
1681  * Locking Note: The rport lock is exected to be held before calling
1682  * this function.
1683  */
1684 static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
1685                                    struct fc_frame *rx_fp)
1686 {
1687         struct fc_lport *lport = rdata->local_port;
1688         struct fc_frame *fp;
1689         struct {
1690                 struct fc_els_prli prli;
1691                 struct fc_els_spp spp;
1692         } *pp;
1693         struct fc_els_spp *rspp;        /* request service param page */
1694         struct fc_els_spp *spp; /* response spp */
1695         unsigned int len;
1696         unsigned int plen;
1697         enum fc_els_spp_resp resp;
1698         enum fc_els_spp_resp passive;
1699         struct fc_seq_els_data rjt_data;
1700         struct fc4_prov *prov;
1701
1702         FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
1703                      fc_rport_state(rdata));
1704
1705         len = fr_len(rx_fp) - sizeof(struct fc_frame_header);
1706         pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
1707         if (!pp)
1708                 goto reject_len;
1709         plen = ntohs(pp->prli.prli_len);
1710         if ((plen % 4) != 0 || plen > len || plen < 16)
1711                 goto reject_len;
1712         if (plen < len)
1713                 len = plen;
1714         plen = pp->prli.prli_spp_len;
1715         if ((plen % 4) != 0 || plen < sizeof(*spp) ||
1716             plen > len || len < sizeof(*pp) || plen < 12)
1717                 goto reject_len;
1718         rspp = &pp->spp;
1719
1720         fp = fc_frame_alloc(lport, len);
1721         if (!fp) {
1722                 rjt_data.reason = ELS_RJT_UNAB;
1723                 rjt_data.explan = ELS_EXPL_INSUF_RES;
1724                 goto reject;
1725         }
1726         pp = fc_frame_payload_get(fp, len);
1727         WARN_ON(!pp);
1728         memset(pp, 0, len);
1729         pp->prli.prli_cmd = ELS_LS_ACC;
1730         pp->prli.prli_spp_len = plen;
1731         pp->prli.prli_len = htons(len);
1732         len -= sizeof(struct fc_els_prli);
1733
1734         /*
1735          * Go through all the service parameter pages and build
1736          * response.  If plen indicates longer SPP than standard,
1737          * use that.  The entire response has been pre-cleared above.
1738          */
1739         spp = &pp->spp;
1740         mutex_lock(&fc_prov_mutex);
1741         while (len >= plen) {
1742                 rdata->spp_type = rspp->spp_type;
1743                 spp->spp_type = rspp->spp_type;
1744                 spp->spp_type_ext = rspp->spp_type_ext;
1745                 resp = 0;
1746
1747                 if (rspp->spp_type < FC_FC4_PROV_SIZE) {
1748                         prov = fc_active_prov[rspp->spp_type];
1749                         if (prov)
1750                                 resp = prov->prli(rdata, plen, rspp, spp);
1751                         prov = fc_passive_prov[rspp->spp_type];
1752                         if (prov) {
1753                                 passive = prov->prli(rdata, plen, rspp, spp);
1754                                 if (!resp || passive == FC_SPP_RESP_ACK)
1755                                         resp = passive;
1756                         }
1757                 }
1758                 if (!resp) {
1759                         if (spp->spp_flags & FC_SPP_EST_IMG_PAIR)
1760                                 resp |= FC_SPP_RESP_CONF;
1761                         else
1762                                 resp |= FC_SPP_RESP_INVL;
1763                 }
1764                 spp->spp_flags |= resp;
1765                 len -= plen;
1766                 rspp = (struct fc_els_spp *)((char *)rspp + plen);
1767                 spp = (struct fc_els_spp *)((char *)spp + plen);
1768         }
1769         mutex_unlock(&fc_prov_mutex);
1770
1771         /*
1772          * Send LS_ACC.  If this fails, the originator should retry.
1773          */
1774         fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1775         lport->tt.frame_send(lport, fp);
1776
1777         switch (rdata->rp_state) {
1778         case RPORT_ST_PRLI:
1779                 fc_rport_enter_ready(rdata);
1780                 break;
1781         default:
1782                 break;
1783         }
1784         goto drop;
1785
1786 reject_len:
1787         rjt_data.reason = ELS_RJT_PROT;
1788         rjt_data.explan = ELS_EXPL_INV_LEN;
1789 reject:
1790         lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1791 drop:
1792         fc_frame_free(rx_fp);
1793 }
1794
1795 /**
1796  * fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests
1797  * @rdata: The remote port that sent the PRLO request
1798  * @rx_fp: The PRLO request frame
1799  *
1800  * Locking Note: The rport lock is exected to be held before calling
1801  * this function.
1802  */
1803 static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata,
1804                                    struct fc_frame *rx_fp)
1805 {
1806         struct fc_lport *lport = rdata->local_port;
1807         struct fc_frame *fp;
1808         struct {
1809                 struct fc_els_prlo prlo;
1810                 struct fc_els_spp spp;
1811         } *pp;
1812         struct fc_els_spp *rspp;        /* request service param page */
1813         struct fc_els_spp *spp;         /* response spp */
1814         unsigned int len;
1815         unsigned int plen;
1816         struct fc_seq_els_data rjt_data;
1817
1818         FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n",
1819                      fc_rport_state(rdata));
1820
1821         len = fr_len(rx_fp) - sizeof(struct fc_frame_header);
1822         pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
1823         if (!pp)
1824                 goto reject_len;
1825         plen = ntohs(pp->prlo.prlo_len);
1826         if (plen != 20)
1827                 goto reject_len;
1828         if (plen < len)
1829                 len = plen;
1830
1831         rspp = &pp->spp;
1832
1833         fp = fc_frame_alloc(lport, len);
1834         if (!fp) {
1835                 rjt_data.reason = ELS_RJT_UNAB;
1836                 rjt_data.explan = ELS_EXPL_INSUF_RES;
1837                 goto reject;
1838         }
1839
1840         pp = fc_frame_payload_get(fp, len);
1841         WARN_ON(!pp);
1842         memset(pp, 0, len);
1843         pp->prlo.prlo_cmd = ELS_LS_ACC;
1844         pp->prlo.prlo_obs = 0x10;
1845         pp->prlo.prlo_len = htons(len);
1846         spp = &pp->spp;
1847         spp->spp_type = rspp->spp_type;
1848         spp->spp_type_ext = rspp->spp_type_ext;
1849         spp->spp_flags = FC_SPP_RESP_ACK;
1850
1851         fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
1852
1853         fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1854         lport->tt.frame_send(lport, fp);
1855         goto drop;
1856
1857 reject_len:
1858         rjt_data.reason = ELS_RJT_PROT;
1859         rjt_data.explan = ELS_EXPL_INV_LEN;
1860 reject:
1861         lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1862 drop:
1863         fc_frame_free(rx_fp);
1864 }
1865
1866 /**
1867  * fc_rport_recv_logo_req() - Handler for logout (LOGO) requests
1868  * @lport: The local port that received the LOGO request
1869  * @fp:    The LOGO request frame
1870  *
1871  * Locking Note: The rport lock is exected to be held before calling
1872  * this function.
1873  */
1874 static void fc_rport_recv_logo_req(struct fc_lport *lport, struct fc_frame *fp)
1875 {
1876         struct fc_rport_priv *rdata;
1877         u32 sid;
1878
1879         lport->tt.seq_els_rsp_send(fp, ELS_LS_ACC, NULL);
1880
1881         sid = fc_frame_sid(fp);
1882
1883         mutex_lock(&lport->disc.disc_mutex);
1884         rdata = lport->tt.rport_lookup(lport, sid);
1885         if (rdata) {
1886                 mutex_lock(&rdata->rp_mutex);
1887                 FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n",
1888                              fc_rport_state(rdata));
1889
1890                 fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
1891                 mutex_unlock(&rdata->rp_mutex);
1892         } else
1893                 FC_RPORT_ID_DBG(lport, sid,
1894                                 "Received LOGO from non-logged-in port\n");
1895         mutex_unlock(&lport->disc.disc_mutex);
1896         fc_frame_free(fp);
1897 }
1898
1899 /**
1900  * fc_rport_flush_queue() - Flush the rport_event_queue
1901  */
1902 static void fc_rport_flush_queue(void)
1903 {
1904         flush_workqueue(rport_event_queue);
1905 }
1906
1907 /**
1908  * fc_rport_init() - Initialize the remote port layer for a local port
1909  * @lport: The local port to initialize the remote port layer for
1910  */
1911 int fc_rport_init(struct fc_lport *lport)
1912 {
1913         if (!lport->tt.rport_lookup)
1914                 lport->tt.rport_lookup = fc_rport_lookup;
1915
1916         if (!lport->tt.rport_create)
1917                 lport->tt.rport_create = fc_rport_create;
1918
1919         if (!lport->tt.rport_login)
1920                 lport->tt.rport_login = fc_rport_login;
1921
1922         if (!lport->tt.rport_logoff)
1923                 lport->tt.rport_logoff = fc_rport_logoff;
1924
1925         if (!lport->tt.rport_recv_req)
1926                 lport->tt.rport_recv_req = fc_rport_recv_req;
1927
1928         if (!lport->tt.rport_flush_queue)
1929                 lport->tt.rport_flush_queue = fc_rport_flush_queue;
1930
1931         if (!lport->tt.rport_destroy)
1932                 lport->tt.rport_destroy = fc_rport_destroy;
1933
1934         return 0;
1935 }
1936 EXPORT_SYMBOL(fc_rport_init);
1937
1938 /**
1939  * fc_rport_fcp_prli() - Handle incoming PRLI for the FCP initiator.
1940  * @rdata: remote port private
1941  * @spp_len: service parameter page length
1942  * @rspp: received service parameter page
1943  * @spp: response service parameter page
1944  *
1945  * Returns the value for the response code to be placed in spp_flags;
1946  * Returns 0 if not an initiator.
1947  */
1948 static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len,
1949                              const struct fc_els_spp *rspp,
1950                              struct fc_els_spp *spp)
1951 {
1952         struct fc_lport *lport = rdata->local_port;
1953         u32 fcp_parm;
1954
1955         fcp_parm = ntohl(rspp->spp_params);
1956         rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
1957         if (fcp_parm & FCP_SPPF_INIT_FCN)
1958                 rdata->ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
1959         if (fcp_parm & FCP_SPPF_TARG_FCN)
1960                 rdata->ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
1961         if (fcp_parm & FCP_SPPF_RETRY)
1962                 rdata->flags |= FC_RP_FLAGS_RETRY;
1963         rdata->supported_classes = FC_COS_CLASS3;
1964
1965         if (!(lport->service_params & FC_RPORT_ROLE_FCP_INITIATOR))
1966                 return 0;
1967
1968         spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
1969
1970         /*
1971          * OR in our service parameters with other providers (target), if any.
1972          */
1973         fcp_parm = ntohl(spp->spp_params);
1974         spp->spp_params = htonl(fcp_parm | lport->service_params);
1975         return FC_SPP_RESP_ACK;
1976 }
1977
1978 /*
1979  * FC-4 provider ops for FCP initiator.
1980  */
1981 struct fc4_prov fc_rport_fcp_init = {
1982         .prli = fc_rport_fcp_prli,
1983 };
1984
1985 /**
1986  * fc_rport_t0_prli() - Handle incoming PRLI parameters for type 0
1987  * @rdata: remote port private
1988  * @spp_len: service parameter page length
1989  * @rspp: received service parameter page
1990  * @spp: response service parameter page
1991  */
1992 static int fc_rport_t0_prli(struct fc_rport_priv *rdata, u32 spp_len,
1993                             const struct fc_els_spp *rspp,
1994                             struct fc_els_spp *spp)
1995 {
1996         if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR)
1997                 return FC_SPP_RESP_INVL;
1998         return FC_SPP_RESP_ACK;
1999 }
2000
2001 /*
2002  * FC-4 provider ops for type 0 service parameters.
2003  *
2004  * This handles the special case of type 0 which is always successful
2005  * but doesn't do anything otherwise.
2006  */
2007 struct fc4_prov fc_rport_t0_prov = {
2008         .prli = fc_rport_t0_prli,
2009 };
2010
2011 /**
2012  * fc_setup_rport() - Initialize the rport_event_queue
2013  */
2014 int fc_setup_rport(void)
2015 {
2016         rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
2017         if (!rport_event_queue)
2018                 return -ENOMEM;
2019         return 0;
2020 }
2021
2022 /**
2023  * fc_destroy_rport() - Destroy the rport_event_queue
2024  */
2025 void fc_destroy_rport(void)
2026 {
2027         destroy_workqueue(rport_event_queue);
2028 }
2029
2030 /**
2031  * fc_rport_terminate_io() - Stop all outstanding I/O on a remote port
2032  * @rport: The remote port whose I/O should be terminated
2033  */
2034 void fc_rport_terminate_io(struct fc_rport *rport)
2035 {
2036         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
2037         struct fc_lport *lport = rpriv->local_port;
2038
2039         lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
2040         lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
2041 }
2042 EXPORT_SYMBOL(fc_rport_terminate_io);