]> Pileus Git - ~andy/linux/blob - drivers/rtc/rtc-spear.c
Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy...
[~andy/linux] / drivers / rtc / rtc-spear.c
1 /*
2  * drivers/rtc/rtc-spear.c
3  *
4  * Copyright (C) 2010 ST Microelectronics
5  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
6  *
7  * This file is licensed under the terms of the GNU General Public
8  * License version 2. This program is licensed "as is" without any
9  * warranty of any kind, whether express or implied.
10  */
11
12 #include <linux/bcd.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/irq.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/platform_device.h>
21 #include <linux/rtc.h>
22 #include <linux/slab.h>
23 #include <linux/spinlock.h>
24
25 /* RTC registers */
26 #define TIME_REG                0x00
27 #define DATE_REG                0x04
28 #define ALARM_TIME_REG          0x08
29 #define ALARM_DATE_REG          0x0C
30 #define CTRL_REG                0x10
31 #define STATUS_REG              0x14
32
33 /* TIME_REG & ALARM_TIME_REG */
34 #define SECONDS_UNITS           (0xf<<0)        /* seconds units position */
35 #define SECONDS_TENS            (0x7<<4)        /* seconds tens position */
36 #define MINUTES_UNITS           (0xf<<8)        /* minutes units position */
37 #define MINUTES_TENS            (0x7<<12)       /* minutes tens position */
38 #define HOURS_UNITS             (0xf<<16)       /* hours units position */
39 #define HOURS_TENS              (0x3<<20)       /* hours tens position */
40
41 /* DATE_REG & ALARM_DATE_REG */
42 #define DAYS_UNITS              (0xf<<0)        /* days units position */
43 #define DAYS_TENS               (0x3<<4)        /* days tens position */
44 #define MONTHS_UNITS            (0xf<<8)        /* months units position */
45 #define MONTHS_TENS             (0x1<<12)       /* months tens position */
46 #define YEARS_UNITS             (0xf<<16)       /* years units position */
47 #define YEARS_TENS              (0xf<<20)       /* years tens position */
48 #define YEARS_HUNDREDS          (0xf<<24)       /* years hundereds position */
49 #define YEARS_MILLENIUMS        (0xf<<28)       /* years millenium position */
50
51 /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/
52 #define SECOND_SHIFT            0x00            /* seconds units */
53 #define MINUTE_SHIFT            0x08            /* minutes units position */
54 #define HOUR_SHIFT              0x10            /* hours units position */
55 #define MDAY_SHIFT              0x00            /* Month day shift */
56 #define MONTH_SHIFT             0x08            /* Month shift */
57 #define YEAR_SHIFT              0x10            /* Year shift */
58
59 #define SECOND_MASK             0x7F
60 #define MIN_MASK                0x7F
61 #define HOUR_MASK               0x3F
62 #define DAY_MASK                0x3F
63 #define MONTH_MASK              0x7F
64 #define YEAR_MASK               0xFFFF
65
66 /* date reg equal to time reg, for debug only */
67 #define TIME_BYP                (1<<9)
68 #define INT_ENABLE              (1<<31)         /* interrupt enable */
69
70 /* STATUS_REG */
71 #define CLK_UNCONNECTED         (1<<0)
72 #define PEND_WR_TIME            (1<<2)
73 #define PEND_WR_DATE            (1<<3)
74 #define LOST_WR_TIME            (1<<4)
75 #define LOST_WR_DATE            (1<<5)
76 #define RTC_INT_MASK            (1<<31)
77 #define STATUS_BUSY             (PEND_WR_TIME | PEND_WR_DATE)
78 #define STATUS_FAIL             (LOST_WR_TIME | LOST_WR_DATE)
79
80 struct spear_rtc_config {
81         struct rtc_device *rtc;
82         struct clk *clk;
83         spinlock_t lock;
84         void __iomem *ioaddr;
85         unsigned int irq_wake;
86 };
87
88 static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config)
89 {
90         unsigned int val;
91         unsigned long flags;
92
93         spin_lock_irqsave(&config->lock, flags);
94         val = readl(config->ioaddr + STATUS_REG);
95         val |= RTC_INT_MASK;
96         writel(val, config->ioaddr + STATUS_REG);
97         spin_unlock_irqrestore(&config->lock, flags);
98 }
99
100 static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config)
101 {
102         unsigned int val;
103
104         val = readl(config->ioaddr + CTRL_REG);
105         if (!(val & INT_ENABLE)) {
106                 spear_rtc_clear_interrupt(config);
107                 val |= INT_ENABLE;
108                 writel(val, config->ioaddr + CTRL_REG);
109         }
110 }
111
112 static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config)
113 {
114         unsigned int val;
115
116         val = readl(config->ioaddr + CTRL_REG);
117         if (val & INT_ENABLE) {
118                 val &= ~INT_ENABLE;
119                 writel(val, config->ioaddr + CTRL_REG);
120         }
121 }
122
123 static inline int is_write_complete(struct spear_rtc_config *config)
124 {
125         int ret = 0;
126         unsigned long flags;
127
128         spin_lock_irqsave(&config->lock, flags);
129         if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL)
130                 ret = -EIO;
131         spin_unlock_irqrestore(&config->lock, flags);
132
133         return ret;
134 }
135
136 static void rtc_wait_not_busy(struct spear_rtc_config *config)
137 {
138         int status, count = 0;
139         unsigned long flags;
140
141         /* Assuming BUSY may stay active for 80 msec) */
142         for (count = 0; count < 80; count++) {
143                 spin_lock_irqsave(&config->lock, flags);
144                 status = readl(config->ioaddr + STATUS_REG);
145                 spin_unlock_irqrestore(&config->lock, flags);
146                 if ((status & STATUS_BUSY) == 0)
147                         break;
148                 /* check status busy, after each msec */
149                 msleep(1);
150         }
151 }
152
153 static irqreturn_t spear_rtc_irq(int irq, void *dev_id)
154 {
155         struct spear_rtc_config *config = dev_id;
156         unsigned long flags, events = 0;
157         unsigned int irq_data;
158
159         spin_lock_irqsave(&config->lock, flags);
160         irq_data = readl(config->ioaddr + STATUS_REG);
161         spin_unlock_irqrestore(&config->lock, flags);
162
163         if ((irq_data & RTC_INT_MASK)) {
164                 spear_rtc_clear_interrupt(config);
165                 events = RTC_IRQF | RTC_AF;
166                 rtc_update_irq(config->rtc, 1, events);
167                 return IRQ_HANDLED;
168         } else
169                 return IRQ_NONE;
170
171 }
172
173 static int tm2bcd(struct rtc_time *tm)
174 {
175         if (rtc_valid_tm(tm) != 0)
176                 return -EINVAL;
177         tm->tm_sec = bin2bcd(tm->tm_sec);
178         tm->tm_min = bin2bcd(tm->tm_min);
179         tm->tm_hour = bin2bcd(tm->tm_hour);
180         tm->tm_mday = bin2bcd(tm->tm_mday);
181         tm->tm_mon = bin2bcd(tm->tm_mon + 1);
182         tm->tm_year = bin2bcd(tm->tm_year);
183
184         return 0;
185 }
186
187 static void bcd2tm(struct rtc_time *tm)
188 {
189         tm->tm_sec = bcd2bin(tm->tm_sec);
190         tm->tm_min = bcd2bin(tm->tm_min);
191         tm->tm_hour = bcd2bin(tm->tm_hour);
192         tm->tm_mday = bcd2bin(tm->tm_mday);
193         tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
194         /* epoch == 1900 */
195         tm->tm_year = bcd2bin(tm->tm_year);
196 }
197
198 /*
199  * spear_rtc_read_time - set the time
200  * @dev: rtc device in use
201  * @tm: holds date and time
202  *
203  * This function read time and date. On success it will return 0
204  * otherwise -ve error is returned.
205  */
206 static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm)
207 {
208         struct spear_rtc_config *config = dev_get_drvdata(dev);
209         unsigned int time, date;
210
211         /* we don't report wday/yday/isdst ... */
212         rtc_wait_not_busy(config);
213
214         time = readl(config->ioaddr + TIME_REG);
215         date = readl(config->ioaddr + DATE_REG);
216         tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
217         tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
218         tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
219         tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
220         tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
221         tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
222
223         bcd2tm(tm);
224         return 0;
225 }
226
227 /*
228  * spear_rtc_set_time - set the time
229  * @dev: rtc device in use
230  * @tm: holds date and time
231  *
232  * This function set time and date. On success it will return 0
233  * otherwise -ve error is returned.
234  */
235 static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm)
236 {
237         struct spear_rtc_config *config = dev_get_drvdata(dev);
238         unsigned int time, date, err = 0;
239
240         if (tm2bcd(tm) < 0)
241                 return -EINVAL;
242
243         rtc_wait_not_busy(config);
244         time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) |
245                 (tm->tm_hour << HOUR_SHIFT);
246         date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) |
247                 (tm->tm_year << YEAR_SHIFT);
248         writel(time, config->ioaddr + TIME_REG);
249         writel(date, config->ioaddr + DATE_REG);
250         err = is_write_complete(config);
251         if (err < 0)
252                 return err;
253
254         return 0;
255 }
256
257 /*
258  * spear_rtc_read_alarm - read the alarm time
259  * @dev: rtc device in use
260  * @alm: holds alarm date and time
261  *
262  * This function read alarm time and date. On success it will return 0
263  * otherwise -ve error is returned.
264  */
265 static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
266 {
267         struct spear_rtc_config *config = dev_get_drvdata(dev);
268         unsigned int time, date;
269
270         rtc_wait_not_busy(config);
271
272         time = readl(config->ioaddr + ALARM_TIME_REG);
273         date = readl(config->ioaddr + ALARM_DATE_REG);
274         alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
275         alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
276         alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
277         alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
278         alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
279         alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
280
281         bcd2tm(&alm->time);
282         alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE;
283
284         return 0;
285 }
286
287 /*
288  * spear_rtc_set_alarm - set the alarm time
289  * @dev: rtc device in use
290  * @alm: holds alarm date and time
291  *
292  * This function set alarm time and date. On success it will return 0
293  * otherwise -ve error is returned.
294  */
295 static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
296 {
297         struct spear_rtc_config *config = dev_get_drvdata(dev);
298         unsigned int time, date, err = 0;
299
300         if (tm2bcd(&alm->time) < 0)
301                 return -EINVAL;
302
303         rtc_wait_not_busy(config);
304
305         time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min <<
306                         MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT);
307         date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon <<
308                         MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT);
309
310         writel(time, config->ioaddr + ALARM_TIME_REG);
311         writel(date, config->ioaddr + ALARM_DATE_REG);
312         err = is_write_complete(config);
313         if (err < 0)
314                 return err;
315
316         if (alm->enabled)
317                 spear_rtc_enable_interrupt(config);
318         else
319                 spear_rtc_disable_interrupt(config);
320
321         return 0;
322 }
323
324 static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled)
325 {
326         struct spear_rtc_config *config = dev_get_drvdata(dev);
327         int ret = 0;
328
329         spear_rtc_clear_interrupt(config);
330
331         switch (enabled) {
332         case 0:
333                 /* alarm off */
334                 spear_rtc_disable_interrupt(config);
335                 break;
336         case 1:
337                 /* alarm on */
338                 spear_rtc_enable_interrupt(config);
339                 break;
340         default:
341                 ret = -EINVAL;
342                 break;
343         }
344
345         return ret;
346 }
347
348 static struct rtc_class_ops spear_rtc_ops = {
349         .read_time = spear_rtc_read_time,
350         .set_time = spear_rtc_set_time,
351         .read_alarm = spear_rtc_read_alarm,
352         .set_alarm = spear_rtc_set_alarm,
353         .alarm_irq_enable = spear_alarm_irq_enable,
354 };
355
356 static int __devinit spear_rtc_probe(struct platform_device *pdev)
357 {
358         struct resource *res;
359         struct spear_rtc_config *config;
360         unsigned int status = 0;
361         int irq;
362
363         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
364         if (!res) {
365                 dev_err(&pdev->dev, "no resource defined\n");
366                 return -EBUSY;
367         }
368         if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
369                 dev_err(&pdev->dev, "rtc region already claimed\n");
370                 return -EBUSY;
371         }
372
373         config = kzalloc(sizeof(*config), GFP_KERNEL);
374         if (!config) {
375                 dev_err(&pdev->dev, "out of memory\n");
376                 status = -ENOMEM;
377                 goto err_release_region;
378         }
379
380         config->clk = clk_get(&pdev->dev, NULL);
381         if (IS_ERR(config->clk)) {
382                 status = PTR_ERR(config->clk);
383                 goto err_kfree;
384         }
385
386         status = clk_enable(config->clk);
387         if (status < 0)
388                 goto err_clk_put;
389
390         config->ioaddr = ioremap(res->start, resource_size(res));
391         if (!config->ioaddr) {
392                 dev_err(&pdev->dev, "ioremap fail\n");
393                 status = -ENOMEM;
394                 goto err_disable_clock;
395         }
396
397         spin_lock_init(&config->lock);
398         platform_set_drvdata(pdev, config);
399
400         config->rtc = rtc_device_register(pdev->name, &pdev->dev,
401                         &spear_rtc_ops, THIS_MODULE);
402         if (IS_ERR(config->rtc)) {
403                 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
404                                 PTR_ERR(config->rtc));
405                 status = PTR_ERR(config->rtc);
406                 goto err_iounmap;
407         }
408
409         /* alarm irqs */
410         irq = platform_get_irq(pdev, 0);
411         if (irq < 0) {
412                 dev_err(&pdev->dev, "no update irq?\n");
413                 status = irq;
414                 goto err_clear_platdata;
415         }
416
417         status = request_irq(irq, spear_rtc_irq, 0, pdev->name, config);
418         if (status) {
419                 dev_err(&pdev->dev, "Alarm interrupt IRQ%d already \
420                                 claimed\n", irq);
421                 goto err_clear_platdata;
422         }
423
424         if (!device_can_wakeup(&pdev->dev))
425                 device_init_wakeup(&pdev->dev, 1);
426
427         return 0;
428
429 err_clear_platdata:
430         platform_set_drvdata(pdev, NULL);
431         rtc_device_unregister(config->rtc);
432 err_iounmap:
433         iounmap(config->ioaddr);
434 err_disable_clock:
435         clk_disable(config->clk);
436 err_clk_put:
437         clk_put(config->clk);
438 err_kfree:
439         kfree(config);
440 err_release_region:
441         release_mem_region(res->start, resource_size(res));
442
443         return status;
444 }
445
446 static int __devexit spear_rtc_remove(struct platform_device *pdev)
447 {
448         struct spear_rtc_config *config = platform_get_drvdata(pdev);
449         int irq;
450         struct resource *res;
451
452         /* leave rtc running, but disable irqs */
453         spear_rtc_disable_interrupt(config);
454         device_init_wakeup(&pdev->dev, 0);
455         irq = platform_get_irq(pdev, 0);
456         if (irq)
457                 free_irq(irq, pdev);
458         clk_disable(config->clk);
459         clk_put(config->clk);
460         iounmap(config->ioaddr);
461         kfree(config);
462         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
463         if (res)
464                 release_mem_region(res->start, resource_size(res));
465         platform_set_drvdata(pdev, NULL);
466         rtc_device_unregister(config->rtc);
467
468         return 0;
469 }
470
471 #ifdef CONFIG_PM
472
473 static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state)
474 {
475         struct spear_rtc_config *config = platform_get_drvdata(pdev);
476         int irq;
477
478         irq = platform_get_irq(pdev, 0);
479         if (device_may_wakeup(&pdev->dev)) {
480                 if (!enable_irq_wake(irq))
481                         config->irq_wake = 1;
482         } else {
483                 spear_rtc_disable_interrupt(config);
484                 clk_disable(config->clk);
485         }
486
487         return 0;
488 }
489
490 static int spear_rtc_resume(struct platform_device *pdev)
491 {
492         struct spear_rtc_config *config = platform_get_drvdata(pdev);
493         int irq;
494
495         irq = platform_get_irq(pdev, 0);
496
497         if (device_may_wakeup(&pdev->dev)) {
498                 if (config->irq_wake) {
499                         disable_irq_wake(irq);
500                         config->irq_wake = 0;
501                 }
502         } else {
503                 clk_enable(config->clk);
504                 spear_rtc_enable_interrupt(config);
505         }
506
507         return 0;
508 }
509
510 #else
511 #define spear_rtc_suspend       NULL
512 #define spear_rtc_resume        NULL
513 #endif
514
515 static void spear_rtc_shutdown(struct platform_device *pdev)
516 {
517         struct spear_rtc_config *config = platform_get_drvdata(pdev);
518
519         spear_rtc_disable_interrupt(config);
520         clk_disable(config->clk);
521 }
522
523 #ifdef CONFIG_OF
524 static const struct of_device_id spear_rtc_id_table[] = {
525         { .compatible = "st,spear600-rtc" },
526         {}
527 };
528 MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
529 #endif
530
531 static struct platform_driver spear_rtc_driver = {
532         .probe = spear_rtc_probe,
533         .remove = __devexit_p(spear_rtc_remove),
534         .suspend = spear_rtc_suspend,
535         .resume = spear_rtc_resume,
536         .shutdown = spear_rtc_shutdown,
537         .driver = {
538                 .name = "rtc-spear",
539                 .of_match_table = of_match_ptr(spear_rtc_id_table),
540         },
541 };
542
543 module_platform_driver(spear_rtc_driver);
544
545 MODULE_ALIAS("platform:rtc-spear");
546 MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>");
547 MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)");
548 MODULE_LICENSE("GPL");