]> Pileus Git - ~andy/linux/blob - drivers/net/wireless/ath/ath.h
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[~andy/linux] / drivers / net / wireless / ath / ath.h
1 /*
2  * Copyright (c) 2008-2009 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #ifndef ATH_H
18 #define ATH_H
19
20 #include <linux/skbuff.h>
21 #include <linux/if_ether.h>
22 #include <linux/spinlock.h>
23 #include <net/mac80211.h>
24
25 /*
26  * The key cache is used for h/w cipher state and also for
27  * tracking station state such as the current tx antenna.
28  * We also setup a mapping table between key cache slot indices
29  * and station state to short-circuit node lookups on rx.
30  * Different parts have different size key caches.  We handle
31  * up to ATH_KEYMAX entries (could dynamically allocate state).
32  */
33 #define ATH_KEYMAX              128     /* max key cache size we handle */
34
35 static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
36
37 struct ath_ani {
38         bool caldone;
39         unsigned int longcal_timer;
40         unsigned int shortcal_timer;
41         unsigned int resetcal_timer;
42         unsigned int checkani_timer;
43         struct timer_list timer;
44 };
45
46 struct ath_cycle_counters {
47         u32 cycles;
48         u32 rx_busy;
49         u32 rx_frame;
50         u32 tx_frame;
51 };
52
53 enum ath_device_state {
54         ATH_HW_UNAVAILABLE,
55         ATH_HW_INITIALIZED,
56 };
57
58 enum ath_bus_type {
59         ATH_PCI,
60         ATH_AHB,
61         ATH_USB,
62 };
63
64 struct reg_dmn_pair_mapping {
65         u16 regDmnEnum;
66         u16 reg_5ghz_ctl;
67         u16 reg_2ghz_ctl;
68 };
69
70 struct ath_regulatory {
71         char alpha2[2];
72         u16 country_code;
73         u16 max_power_level;
74         u16 current_rd;
75         int16_t power_limit;
76         struct reg_dmn_pair_mapping *regpair;
77 };
78
79 enum ath_crypt_caps {
80         ATH_CRYPT_CAP_CIPHER_AESCCM             = BIT(0),
81         ATH_CRYPT_CAP_MIC_COMBINED              = BIT(1),
82 };
83
84 struct ath_keyval {
85         u8 kv_type;
86         u8 kv_pad;
87         u16 kv_len;
88         u8 kv_val[16]; /* TK */
89         u8 kv_mic[8]; /* Michael MIC key */
90         u8 kv_txmic[8]; /* Michael MIC TX key (used only if the hardware
91                          * supports both MIC keys in the same key cache entry;
92                          * in that case, kv_mic is the RX key) */
93 };
94
95 enum ath_cipher {
96         ATH_CIPHER_WEP = 0,
97         ATH_CIPHER_AES_OCB = 1,
98         ATH_CIPHER_AES_CCM = 2,
99         ATH_CIPHER_CKIP = 3,
100         ATH_CIPHER_TKIP = 4,
101         ATH_CIPHER_CLR = 5,
102         ATH_CIPHER_MIC = 127
103 };
104
105 /**
106  * struct ath_ops - Register read/write operations
107  *
108  * @read: Register read
109  * @multi_read: Multiple register read
110  * @write: Register write
111  * @enable_write_buffer: Enable multiple register writes
112  * @write_flush: flush buffered register writes and disable buffering
113  */
114 struct ath_ops {
115         unsigned int (*read)(void *, u32 reg_offset);
116         void (*multi_read)(void *, u32 *addr, u32 *val, u16 count);
117         void (*write)(void *, u32 val, u32 reg_offset);
118         void (*enable_write_buffer)(void *);
119         void (*write_flush) (void *);
120         u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr);
121 };
122
123 struct ath_common;
124 struct ath_bus_ops;
125
126 struct ath_common {
127         void *ah;
128         void *priv;
129         struct ieee80211_hw *hw;
130         int debug_mask;
131         enum ath_device_state state;
132
133         struct ath_ani ani;
134
135         u16 cachelsz;
136         u16 curaid;
137         u8 macaddr[ETH_ALEN];
138         u8 curbssid[ETH_ALEN];
139         u8 bssidmask[ETH_ALEN];
140
141         u32 rx_bufsize;
142
143         u32 keymax;
144         DECLARE_BITMAP(keymap, ATH_KEYMAX);
145         DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
146         enum ath_crypt_caps crypt_caps;
147
148         unsigned int clockrate;
149
150         spinlock_t cc_lock;
151         struct ath_cycle_counters cc_ani;
152         struct ath_cycle_counters cc_survey;
153
154         struct ath_regulatory regulatory;
155         const struct ath_ops *ops;
156         const struct ath_bus_ops *bus_ops;
157
158         bool btcoex_enabled;
159         bool disable_ani;
160 };
161
162 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
163                                 u32 len,
164                                 gfp_t gfp_mask);
165
166 void ath_hw_setbssidmask(struct ath_common *common);
167 void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key);
168 int ath_key_config(struct ath_common *common,
169                           struct ieee80211_vif *vif,
170                           struct ieee80211_sta *sta,
171                           struct ieee80211_key_conf *key);
172 bool ath_hw_keyreset(struct ath_common *common, u16 entry);
173 void ath_hw_cycle_counters_update(struct ath_common *common);
174 int32_t ath_hw_get_listen_time(struct ath_common *common);
175
176 extern __printf(2, 3) void ath_printk(const char *level, const char *fmt, ...);
177
178 #define _ath_printk(level, common, fmt, ...)                    \
179 do {                                                            \
180         __always_unused struct ath_common *unused = common;     \
181         ath_printk(level, fmt, ##__VA_ARGS__);                  \
182 } while (0)
183
184 #define ath_emerg(common, fmt, ...)                             \
185         _ath_printk(KERN_EMERG, common, fmt, ##__VA_ARGS__)
186 #define ath_alert(common, fmt, ...)                             \
187         _ath_printk(KERN_ALERT, common, fmt, ##__VA_ARGS__)
188 #define ath_crit(common, fmt, ...)                              \
189         _ath_printk(KERN_CRIT, common, fmt, ##__VA_ARGS__)
190 #define ath_err(common, fmt, ...)                               \
191         _ath_printk(KERN_ERR, common, fmt, ##__VA_ARGS__)
192 #define ath_warn(common, fmt, ...)                              \
193         _ath_printk(KERN_WARNING, common, fmt, ##__VA_ARGS__)
194 #define ath_notice(common, fmt, ...)                            \
195         _ath_printk(KERN_NOTICE, common, fmt, ##__VA_ARGS__)
196 #define ath_info(common, fmt, ...)                              \
197         _ath_printk(KERN_INFO, common, fmt, ##__VA_ARGS__)
198
199 /**
200  * enum ath_debug_level - atheros wireless debug level
201  *
202  * @ATH_DBG_RESET: reset processing
203  * @ATH_DBG_QUEUE: hardware queue management
204  * @ATH_DBG_EEPROM: eeprom processing
205  * @ATH_DBG_CALIBRATE: periodic calibration
206  * @ATH_DBG_INTERRUPT: interrupt processing
207  * @ATH_DBG_REGULATORY: regulatory processing
208  * @ATH_DBG_ANI: adaptive noise immunitive processing
209  * @ATH_DBG_XMIT: basic xmit operation
210  * @ATH_DBG_BEACON: beacon handling
211  * @ATH_DBG_CONFIG: configuration of the hardware
212  * @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
213  * @ATH_DBG_PS: power save processing
214  * @ATH_DBG_HWTIMER: hardware timer handling
215  * @ATH_DBG_BTCOEX: bluetooth coexistance
216  * @ATH_DBG_BSTUCK: stuck beacons
217  * @ATH_DBG_ANY: enable all debugging
218  *
219  * The debug level is used to control the amount and type of debugging output
220  * we want to see. Each driver has its own method for enabling debugging and
221  * modifying debug level states -- but this is typically done through a
222  * module parameter 'debug' along with a respective 'debug' debugfs file
223  * entry.
224  */
225 enum ATH_DEBUG {
226         ATH_DBG_RESET           = 0x00000001,
227         ATH_DBG_QUEUE           = 0x00000002,
228         ATH_DBG_EEPROM          = 0x00000004,
229         ATH_DBG_CALIBRATE       = 0x00000008,
230         ATH_DBG_INTERRUPT       = 0x00000010,
231         ATH_DBG_REGULATORY      = 0x00000020,
232         ATH_DBG_ANI             = 0x00000040,
233         ATH_DBG_XMIT            = 0x00000080,
234         ATH_DBG_BEACON          = 0x00000100,
235         ATH_DBG_CONFIG          = 0x00000200,
236         ATH_DBG_FATAL           = 0x00000400,
237         ATH_DBG_PS              = 0x00000800,
238         ATH_DBG_HWTIMER         = 0x00001000,
239         ATH_DBG_BTCOEX          = 0x00002000,
240         ATH_DBG_WMI             = 0x00004000,
241         ATH_DBG_BSTUCK          = 0x00008000,
242         ATH_DBG_MCI             = 0x00010000,
243         ATH_DBG_ANY             = 0xffffffff
244 };
245
246 #define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
247
248 #ifdef CONFIG_ATH_DEBUG
249
250 #define ath_dbg(common, dbg_mask, fmt, ...)                             \
251 do {                                                                    \
252         if ((common)->debug_mask & dbg_mask)                            \
253                 _ath_printk(KERN_DEBUG, common, fmt, ##__VA_ARGS__);    \
254 } while (0)
255
256 #define ATH_DBG_WARN(foo, arg...) WARN(foo, arg)
257 #define ATH_DBG_WARN_ON_ONCE(foo) WARN_ON_ONCE(foo)
258
259 #else
260
261 static inline  __attribute__ ((format (printf, 3, 4)))
262 void ath_dbg(struct ath_common *common, enum ATH_DEBUG dbg_mask,
263              const char *fmt, ...)
264 {
265 }
266 #define ATH_DBG_WARN(foo, arg...) do {} while (0)
267 #define ATH_DBG_WARN_ON_ONCE(foo) ({                            \
268         int __ret_warn_once = !!(foo);                          \
269         unlikely(__ret_warn_once);                              \
270 })
271
272 #endif /* CONFIG_ATH_DEBUG */
273
274 /** Returns string describing opmode, or NULL if unknown mode. */
275 #ifdef CONFIG_ATH_DEBUG
276 const char *ath_opmode_to_string(enum nl80211_iftype opmode);
277 #else
278 static inline const char *ath_opmode_to_string(enum nl80211_iftype opmode)
279 {
280         return "UNKNOWN";
281 }
282 #endif
283
284 #endif /* ATH_H */