Pileus Git - ~andy/linux/blob - drivers/net/ethernet/intel/e1000e/82571.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2012 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /*
  30  * 82571EB Gigabit Ethernet Controller
  31  * 82571EB Gigabit Ethernet Controller (Copper)
  32  * 82571EB Gigabit Ethernet Controller (Fiber)
  33  * 82571EB Dual Port Gigabit Mezzanine Adapter
  34  * 82571EB Quad Port Gigabit Mezzanine Adapter
  35  * 82571PT Gigabit PT Quad Port Server ExpressModule
  36  * 82572EI Gigabit Ethernet Controller (Copper)
  37  * 82572EI Gigabit Ethernet Controller (Fiber)
  38  * 82572EI Gigabit Ethernet Controller
  39  * 82573V Gigabit Ethernet Controller (Copper)
  40  * 82573E Gigabit Ethernet Controller (Copper)
  41  * 82573L Gigabit Ethernet Controller
  42  * 82574L Gigabit Network Connection
  43  * 82583V Gigabit Network Connection
  44  */
  45
  46 #include "e1000.h"
  47
  48 #define ID_LED_RESERVED_F746 0xF746
  49 #define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
  50                               (ID_LED_OFF1_ON2  <<  8) | \
  51                               (ID_LED_DEF1_DEF2 <<  4) | \
  52                               (ID_LED_DEF1_DEF2))
  53
  54 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
  55 #define AN_RETRY_COUNT          5 /* Autoneg Retry Count value */
  56 #define E1000_BASE1000T_STATUS          10
  57 #define E1000_IDLE_ERROR_COUNT_MASK     0xFF
  58 #define E1000_RECEIVE_ERROR_COUNTER     21
  59 #define E1000_RECEIVE_ERROR_MAX         0xFFFF
  60
  61 #define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
  62
  63 static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
  64 static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
  65 static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
  66 static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
  67 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
  68                                       u16 words, u16 *data);
  69 static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
  70 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
  71 static s32 e1000_setup_link_82571(struct e1000_hw *hw);
  72 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
  73 static void e1000_clear_vfta_82571(struct e1000_hw *hw);
  74 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
  75 static s32 e1000_led_on_82574(struct e1000_hw *hw);
  76 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
  77 static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
  78 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
  79 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
  80 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
  81 static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
  82 static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
  83
  84 /**
  85  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
  86  *  @hw: pointer to the HW structure
  87  **/
  88 static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
  89 {
  90         struct e1000_phy_info *phy = &hw->phy;
  91         s32 ret_val;
  92
  93         if (hw->phy.media_type != e1000_media_type_copper) {
  94                 phy->type = e1000_phy_none;
  95                 return 0;
  96         }
  97
  98         phy->addr                        = 1;
  99         phy->autoneg_mask                = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 100         phy->reset_delay_us              = 100;
 101
 102         phy->ops.power_up                = e1000_power_up_phy_copper;
 103         phy->ops.power_down              = e1000_power_down_phy_copper_82571;
 104
 105         switch (hw->mac.type) {
 106         case e1000_82571:
 107         case e1000_82572:
 108                 phy->type                = e1000_phy_igp_2;
 109                 break;
 110         case e1000_82573:
 111                 phy->type                = e1000_phy_m88;
 112                 break;
 113         case e1000_82574:
 114         case e1000_82583:
 115                 phy->type                = e1000_phy_bm;
 116                 phy->ops.acquire = e1000_get_hw_semaphore_82574;
 117                 phy->ops.release = e1000_put_hw_semaphore_82574;
 118                 phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
 119                 phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
 120                 break;
 121         default:
 122                 return -E1000_ERR_PHY;
 123                 break;
 124         }
 125
 126         /* This can only be done after all function pointers are setup. */
 127         ret_val = e1000_get_phy_id_82571(hw);
 128         if (ret_val) {
 129                 e_dbg("Error getting PHY ID\n");
 130                 return ret_val;
 131         }
 132
 133         /* Verify phy id */
 134         switch (hw->mac.type) {
 135         case e1000_82571:
 136         case e1000_82572:
 137                 if (phy->id != IGP01E1000_I_PHY_ID)
 138                         ret_val = -E1000_ERR_PHY;
 139                 break;
 140         case e1000_82573:
 141                 if (phy->id != M88E1111_I_PHY_ID)
 142                         ret_val = -E1000_ERR_PHY;
 143                 break;
 144         case e1000_82574:
 145         case e1000_82583:
 146                 if (phy->id != BME1000_E_PHY_ID_R2)
 147                         ret_val = -E1000_ERR_PHY;
 148                 break;
 149         default:
 150                 ret_val = -E1000_ERR_PHY;
 151                 break;
 152         }
 153
 154         if (ret_val)
 155                 e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
 156
 157         return ret_val;
 158 }
 159
 160 /**
 161  *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
 162  *  @hw: pointer to the HW structure
 163  **/
 164 static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 165 {
 166         struct e1000_nvm_info *nvm = &hw->nvm;
 167         u32 eecd = er32(EECD);
 168         u16 size;
 169
 170         nvm->opcode_bits = 8;
 171         nvm->delay_usec = 1;
 172         switch (nvm->override) {
 173         case e1000_nvm_override_spi_large:
 174                 nvm->page_size = 32;
 175                 nvm->address_bits = 16;
 176                 break;
 177         case e1000_nvm_override_spi_small:
 178                 nvm->page_size = 8;
 179                 nvm->address_bits = 8;
 180                 break;
 181         default:
 182                 nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
 183                 nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
 184                 break;
 185         }
 186
 187         switch (hw->mac.type) {
 188         case e1000_82573:
 189         case e1000_82574:
 190         case e1000_82583:
 191                 if (((eecd >> 15) & 0x3) == 0x3) {
 192                         nvm->type = e1000_nvm_flash_hw;
 193                         nvm->word_size = 2048;
 194                         /*
 195                          * Autonomous Flash update bit must be cleared due
 196                          * to Flash update issue.
 197                          */
 198                         eecd &= ~E1000_EECD_AUPDEN;
 199                         ew32(EECD, eecd);
 200                         break;
 201                 }
 202                 /* Fall Through */
 203         default:
 204                 nvm->type = e1000_nvm_eeprom_spi;
 205                 size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
 206                                   E1000_EECD_SIZE_EX_SHIFT);
 207                 /*
 208                  * Added to a constant, "size" becomes the left-shift value
 209                  * for setting word_size.
 210                  */
 211                 size += NVM_WORD_SIZE_BASE_SHIFT;
 212
 213                 /* EEPROM access above 16k is unsupported */
 214                 if (size > 14)
 215                         size = 14;
 216                 nvm->word_size  = 1 << size;
 217                 break;
 218         }
 219
 220         /* Function Pointers */
 221         switch (hw->mac.type) {
 222         case e1000_82574:
 223         case e1000_82583:
 224                 nvm->ops.acquire = e1000_get_hw_semaphore_82574;
 225                 nvm->ops.release = e1000_put_hw_semaphore_82574;
 226                 break;
 227         default:
 228                 break;
 229         }
 230
 231         return 0;
 232 }
 233
 234 /**
 235  *  e1000_init_mac_params_82571 - Init MAC func ptrs.
 236  *  @hw: pointer to the HW structure
 237  **/
 238 static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
 239 {
 240         struct e1000_mac_info *mac = &hw->mac;
 241         u32 swsm = 0;
 242         u32 swsm2 = 0;
 243         bool force_clear_smbi = false;
 244
 245         /* Set media type and media-dependent function pointers */
 246         switch (hw->adapter->pdev->device) {
 247         case E1000_DEV_ID_82571EB_FIBER:
 248         case E1000_DEV_ID_82572EI_FIBER:
 249         case E1000_DEV_ID_82571EB_QUAD_FIBER:
 250                 hw->phy.media_type = e1000_media_type_fiber;
 251                 mac->ops.setup_physical_interface =
 252                     e1000_setup_fiber_serdes_link_82571;
 253                 mac->ops.check_for_link = e1000e_check_for_fiber_link;
 254                 mac->ops.get_link_up_info =
 255                     e1000e_get_speed_and_duplex_fiber_serdes;
 256                 break;
 257         case E1000_DEV_ID_82571EB_SERDES:
 258         case E1000_DEV_ID_82571EB_SERDES_DUAL:
 259         case E1000_DEV_ID_82571EB_SERDES_QUAD:
 260         case E1000_DEV_ID_82572EI_SERDES:
 261                 hw->phy.media_type = e1000_media_type_internal_serdes;
 262                 mac->ops.setup_physical_interface =
 263                     e1000_setup_fiber_serdes_link_82571;
 264                 mac->ops.check_for_link = e1000_check_for_serdes_link_82571;
 265                 mac->ops.get_link_up_info =
 266                     e1000e_get_speed_and_duplex_fiber_serdes;
 267                 break;
 268         default:
 269                 hw->phy.media_type = e1000_media_type_copper;
 270                 mac->ops.setup_physical_interface =
 271                     e1000_setup_copper_link_82571;
 272                 mac->ops.check_for_link = e1000e_check_for_copper_link;
 273                 mac->ops.get_link_up_info = e1000e_get_speed_and_duplex_copper;
 274                 break;
 275         }
 276
 277         /* Set mta register count */
 278         mac->mta_reg_count = 128;
 279         /* Set rar entry count */
 280         mac->rar_entry_count = E1000_RAR_ENTRIES;
 281         /* Adaptive IFS supported */
 282         mac->adaptive_ifs = true;
 283
 284         /* MAC-specific function pointers */
 285         switch (hw->mac.type) {
 286         case e1000_82573:
 287                 mac->ops.set_lan_id = e1000_set_lan_id_single_port;
 288                 mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
 289                 mac->ops.led_on = e1000e_led_on_generic;
 290                 mac->ops.blink_led = e1000e_blink_led_generic;
 291
 292                 /* FWSM register */
 293                 mac->has_fwsm = true;
 294                 /*
 295                  * ARC supported; valid only if manageability features are
 296                  * enabled.
 297                  */
 298                 mac->arc_subsystem_valid = !!(er32(FWSM) &
 299                                               E1000_FWSM_MODE_MASK);
 300                 break;
 301         case e1000_82574:
 302         case e1000_82583:
 303                 mac->ops.set_lan_id = e1000_set_lan_id_single_port;
 304                 mac->ops.check_mng_mode = e1000_check_mng_mode_82574;
 305                 mac->ops.led_on = e1000_led_on_82574;
 306                 break;
 307         default:
 308                 mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
 309                 mac->ops.led_on = e1000e_led_on_generic;
 310                 mac->ops.blink_led = e1000e_blink_led_generic;
 311
 312                 /* FWSM register */
 313                 mac->has_fwsm = true;
 314                 break;
 315         }
 316
 317         /*
 318          * Ensure that the inter-port SWSM.SMBI lock bit is clear before
 319          * first NVM or PHY access. This should be done for single-port
 320          * devices, and for one port only on dual-port devices so that
 321          * for those devices we can still use the SMBI lock to synchronize
 322          * inter-port accesses to the PHY & NVM.
 323          */
 324         switch (hw->mac.type) {
 325         case e1000_82571:
 326         case e1000_82572:
 327                 swsm2 = er32(SWSM2);
 328
 329                 if (!(swsm2 & E1000_SWSM2_LOCK)) {
 330                         /* Only do this for the first interface on this card */
 331                         ew32(SWSM2, swsm2 | E1000_SWSM2_LOCK);
 332                         force_clear_smbi = true;
 333                 } else {
 334                         force_clear_smbi = false;
 335                 }
 336                 break;
 337         default:
 338                 force_clear_smbi = true;
 339                 break;
 340         }
 341
 342         if (force_clear_smbi) {
 343                 /* Make sure SWSM.SMBI is clear */
 344                 swsm = er32(SWSM);
 345                 if (swsm & E1000_SWSM_SMBI) {
 346                         /* This bit should not be set on a first interface, and
 347                          * indicates that the bootagent or EFI code has
 348                          * improperly left this bit enabled
 349                          */
 350                         e_dbg("Please update your 82571 Bootagent\n");
 351                 }
 352                 ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
 353         }
 354
 355         /*
 356          * Initialize device specific counter of SMBI acquisition
 357          * timeouts.
 358          */
 359          hw->dev_spec.e82571.smb_counter = 0;
 360
 361         return 0;
 362 }
 363
 364 static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 365 {
 366         struct e1000_hw *hw = &adapter->hw;
 367         static int global_quad_port_a; /* global port a indication */
 368         struct pci_dev *pdev = adapter->pdev;
 369         int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
 370         s32 rc;
 371
 372         rc = e1000_init_mac_params_82571(hw);
 373         if (rc)
 374                 return rc;
 375
 376         rc = e1000_init_nvm_params_82571(hw);
 377         if (rc)
 378                 return rc;
 379
 380         rc = e1000_init_phy_params_82571(hw);
 381         if (rc)
 382                 return rc;
 383
 384         /* tag quad port adapters first, it's used below */
 385         switch (pdev->device) {
 386         case E1000_DEV_ID_82571EB_QUAD_COPPER:
 387         case E1000_DEV_ID_82571EB_QUAD_FIBER:
 388         case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
 389         case E1000_DEV_ID_82571PT_QUAD_COPPER:
 390                 adapter->flags |= FLAG_IS_QUAD_PORT;
 391                 /* mark the first port */
 392                 if (global_quad_port_a == 0)
 393                         adapter->flags |= FLAG_IS_QUAD_PORT_A;
 394                 /* Reset for multiple quad port adapters */
 395                 global_quad_port_a++;
 396                 if (global_quad_port_a == 4)
 397                         global_quad_port_a = 0;
 398                 break;
 399         default:
 400                 break;
 401         }
 402
 403         switch (adapter->hw.mac.type) {
 404         case e1000_82571:
 405                 /* these dual ports don't have WoL on port B at all */
 406                 if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
 407                      (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
 408                      (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
 409                     (is_port_b))
 410                         adapter->flags &= ~FLAG_HAS_WOL;
 411                 /* quad ports only support WoL on port A */
 412                 if (adapter->flags & FLAG_IS_QUAD_PORT &&
 413                     (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
 414                         adapter->flags &= ~FLAG_HAS_WOL;
 415                 /* Does not support WoL on any port */
 416                 if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
 417                         adapter->flags &= ~FLAG_HAS_WOL;
 418                 break;
 419         case e1000_82573:
 420                 if (pdev->device == E1000_DEV_ID_82573L) {
 421                         adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
 422                         adapter->max_hw_frame_size = DEFAULT_JUMBO;
 423                 }
 424                 break;
 425         default:
 426                 break;
 427         }
 428
 429         return 0;
 430 }
 431
 432 /**
 433  *  e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
 434  *  @hw: pointer to the HW structure
 435  *
 436  *  Reads the PHY registers and stores the PHY ID and possibly the PHY
 437  *  revision in the hardware structure.
 438  **/
 439 static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 440 {
 441         struct e1000_phy_info *phy = &hw->phy;
 442         s32 ret_val;
 443         u16 phy_id = 0;
 444
 445         switch (hw->mac.type) {
 446         case e1000_82571:
 447         case e1000_82572:
 448                 /*
 449                  * The 82571 firmware may still be configuring the PHY.
 450                  * In this case, we cannot access the PHY until the
 451                  * configuration is done.  So we explicitly set the
 452                  * PHY ID.
 453                  */
 454                 phy->id = IGP01E1000_I_PHY_ID;
 455                 break;
 456         case e1000_82573:
 457                 return e1000e_get_phy_id(hw);
 458                 break;
 459         case e1000_82574:
 460         case e1000_82583:
 461                 ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
 462                 if (ret_val)
 463                         return ret_val;
 464
 465                 phy->id = (u32)(phy_id << 16);
 466                 udelay(20);
 467                 ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
 468                 if (ret_val)
 469                         return ret_val;
 470
 471                 phy->id |= (u32)(phy_id);
 472                 phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
 473                 break;
 474         default:
 475                 return -E1000_ERR_PHY;
 476                 break;
 477         }
 478
 479         return 0;
 480 }
 481
 482 /**
 483  *  e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
 484  *  @hw: pointer to the HW structure
 485  *
 486  *  Acquire the HW semaphore to access the PHY or NVM
 487  **/
 488 static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 489 {
 490         u32 swsm;
 491         s32 sw_timeout = hw->nvm.word_size + 1;
 492         s32 fw_timeout = hw->nvm.word_size + 1;
 493         s32 i = 0;
 494
 495         /*
 496          * If we have timedout 3 times on trying to acquire
 497          * the inter-port SMBI semaphore, there is old code
 498          * operating on the other port, and it is not
 499          * releasing SMBI. Modify the number of times that
 500          * we try for the semaphore to interwork with this
 501          * older code.
 502          */
 503         if (hw->dev_spec.e82571.smb_counter > 2)
 504                 sw_timeout = 1;
 505
 506         /* Get the SW semaphore */
 507         while (i < sw_timeout) {
 508                 swsm = er32(SWSM);
 509                 if (!(swsm & E1000_SWSM_SMBI))
 510                         break;
 511
 512                 udelay(50);
 513                 i++;
 514         }
 515
 516         if (i == sw_timeout) {
 517                 e_dbg("Driver can't access device - SMBI bit is set.\n");
 518                 hw->dev_spec.e82571.smb_counter++;
 519         }
 520         /* Get the FW semaphore. */
 521         for (i = 0; i < fw_timeout; i++) {
 522                 swsm = er32(SWSM);
 523                 ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
 524
 525                 /* Semaphore acquired if bit latched */
 526                 if (er32(SWSM) & E1000_SWSM_SWESMBI)
 527                         break;
 528
 529                 udelay(50);
 530         }
 531
 532         if (i == fw_timeout) {
 533                 /* Release semaphores */
 534                 e1000_put_hw_semaphore_82571(hw);
 535                 e_dbg("Driver can't access the NVM\n");
 536                 return -E1000_ERR_NVM;
 537         }
 538
 539         return 0;
 540 }
 541
 542 /**
 543  *  e1000_put_hw_semaphore_82571 - Release hardware semaphore
 544  *  @hw: pointer to the HW structure
 545  *
 546  *  Release hardware semaphore used to access the PHY or NVM
 547  **/
 548 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
 549 {
 550         u32 swsm;
 551
 552         swsm = er32(SWSM);
 553         swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
 554         ew32(SWSM, swsm);
 555 }
 556 /**
 557  *  e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
 558  *  @hw: pointer to the HW structure
 559  *
 560  *  Acquire the HW semaphore during reset.
 561  *
 562  **/
 563 static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
 564 {
 565         u32 extcnf_ctrl;
 566         s32 i = 0;
 567
 568         extcnf_ctrl = er32(EXTCNF_CTRL);
 569         extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 570         do {
 571                 ew32(EXTCNF_CTRL, extcnf_ctrl);
 572                 extcnf_ctrl = er32(EXTCNF_CTRL);
 573
 574                 if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
 575                         break;
 576
 577                 extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 578
 579                 usleep_range(2000, 4000);
 580                 i++;
 581         } while (i < MDIO_OWNERSHIP_TIMEOUT);
 582
 583         if (i == MDIO_OWNERSHIP_TIMEOUT) {
 584                 /* Release semaphores */
 585                 e1000_put_hw_semaphore_82573(hw);
 586                 e_dbg("Driver can't access the PHY\n");
 587                 return -E1000_ERR_PHY;
 588         }
 589
 590         return 0;
 591 }
 592
 593 /**
 594  *  e1000_put_hw_semaphore_82573 - Release hardware semaphore
 595  *  @hw: pointer to the HW structure
 596  *
 597  *  Release hardware semaphore used during reset.
 598  *
 599  **/
 600 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
 601 {
 602         u32 extcnf_ctrl;
 603
 604         extcnf_ctrl = er32(EXTCNF_CTRL);
 605         extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 606         ew32(EXTCNF_CTRL, extcnf_ctrl);
 607 }
 608
 609 static DEFINE_MUTEX(swflag_mutex);
 610
 611 /**
 612  *  e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
 613  *  @hw: pointer to the HW structure
 614  *
 615  *  Acquire the HW semaphore to access the PHY or NVM.
 616  *
 617  **/
 618 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
 619 {
 620         s32 ret_val;
 621
 622         mutex_lock(&swflag_mutex);
 623         ret_val = e1000_get_hw_semaphore_82573(hw);
 624         if (ret_val)
 625                 mutex_unlock(&swflag_mutex);
 626         return ret_val;
 627 }
 628
 629 /**
 630  *  e1000_put_hw_semaphore_82574 - Release hardware semaphore
 631  *  @hw: pointer to the HW structure
 632  *
 633  *  Release hardware semaphore used to access the PHY or NVM
 634  *
 635  **/
 636 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
 637 {
 638         e1000_put_hw_semaphore_82573(hw);
 639         mutex_unlock(&swflag_mutex);
 640 }
 641
 642 /**
 643  *  e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
 644  *  @hw: pointer to the HW structure
 645  *  @active: true to enable LPLU, false to disable
 646  *
 647  *  Sets the LPLU D0 state according to the active flag.
 648  *  LPLU will not be activated unless the
 649  *  device autonegotiation advertisement meets standards of
 650  *  either 10 or 10/100 or 10/100/1000 at all duplexes.
 651  *  This is a function pointer entry point only called by
 652  *  PHY setup routines.
 653  **/
 654 static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
 655 {
 656         u16 data = er32(POEMB);
 657
 658         if (active)
 659                 data |= E1000_PHY_CTRL_D0A_LPLU;
 660         else
 661                 data &= ~E1000_PHY_CTRL_D0A_LPLU;
 662
 663         ew32(POEMB, data);
 664         return 0;
 665 }
 666
 667 /**
 668  *  e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
 669  *  @hw: pointer to the HW structure
 670  *  @active: boolean used to enable/disable lplu
 671  *
 672  *  The low power link up (lplu) state is set to the power management level D3
 673  *  when active is true, else clear lplu for D3. LPLU
 674  *  is used during Dx states where the power conservation is most important.
 675  *  During driver activity, SmartSpeed should be enabled so performance is
 676  *  maintained.
 677  **/
 678 static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
 679 {
 680         u16 data = er32(POEMB);
 681
 682         if (!active) {
 683                 data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
 684         } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
 685                    (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
 686                    (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
 687                 data |= E1000_PHY_CTRL_NOND0A_LPLU;
 688         }
 689
 690         ew32(POEMB, data);
 691         return 0;
 692 }
 693
 694 /**
 695  *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
 696  *  @hw: pointer to the HW structure
 697  *
 698  *  To gain access to the EEPROM, first we must obtain a hardware semaphore.
 699  *  Then for non-82573 hardware, set the EEPROM access request bit and wait
 700  *  for EEPROM access grant bit.  If the access grant bit is not set, release
 701  *  hardware semaphore.
 702  **/
 703 static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
 704 {
 705         s32 ret_val;
 706
 707         ret_val = e1000_get_hw_semaphore_82571(hw);
 708         if (ret_val)
 709                 return ret_val;
 710
 711         switch (hw->mac.type) {
 712         case e1000_82573:
 713                 break;
 714         default:
 715                 ret_val = e1000e_acquire_nvm(hw);
 716                 break;
 717         }
 718
 719         if (ret_val)
 720                 e1000_put_hw_semaphore_82571(hw);
 721
 722         return ret_val;
 723 }
 724
 725 /**
 726  *  e1000_release_nvm_82571 - Release exclusive access to EEPROM
 727  *  @hw: pointer to the HW structure
 728  *
 729  *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
 730  **/
 731 static void e1000_release_nvm_82571(struct e1000_hw *hw)
 732 {
 733         e1000e_release_nvm(hw);
 734         e1000_put_hw_semaphore_82571(hw);
 735 }
 736
 737 /**
 738  *  e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
 739  *  @hw: pointer to the HW structure
 740  *  @offset: offset within the EEPROM to be written to
 741  *  @words: number of words to write
 742  *  @data: 16 bit word(s) to be written to the EEPROM
 743  *
 744  *  For non-82573 silicon, write data to EEPROM at offset using SPI interface.
 745  *
 746  *  If e1000e_update_nvm_checksum is not called after this function, the
 747  *  EEPROM will most likely contain an invalid checksum.
 748  **/
 749 static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
 750                                  u16 *data)
 751 {
 752         s32 ret_val;
 753
 754         switch (hw->mac.type) {
 755         case e1000_82573:
 756         case e1000_82574:
 757         case e1000_82583:
 758                 ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
 759                 break;
 760         case e1000_82571:
 761         case e1000_82572:
 762                 ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
 763                 break;
 764         default:
 765                 ret_val = -E1000_ERR_NVM;
 766                 break;
 767         }
 768
 769         return ret_val;
 770 }
 771
 772 /**
 773  *  e1000_update_nvm_checksum_82571 - Update EEPROM checksum
 774  *  @hw: pointer to the HW structure
 775  *
 776  *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
 777  *  up to the checksum.  Then calculates the EEPROM checksum and writes the
 778  *  value to the EEPROM.
 779  **/
 780 static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
 781 {
 782         u32 eecd;
 783         s32 ret_val;
 784         u16 i;
 785
 786         ret_val = e1000e_update_nvm_checksum_generic(hw);
 787         if (ret_val)
 788                 return ret_val;
 789
 790         /*
 791          * If our nvm is an EEPROM, then we're done
 792          * otherwise, commit the checksum to the flash NVM.
 793          */
 794         if (hw->nvm.type != e1000_nvm_flash_hw)
 795                 return 0;
 796
 797         /* Check for pending operations. */
 798         for (i = 0; i < E1000_FLASH_UPDATES; i++) {
 799                 usleep_range(1000, 2000);
 800                 if (!(er32(EECD) & E1000_EECD_FLUPD))
 801                         break;
 802         }
 803
 804         if (i == E1000_FLASH_UPDATES)
 805                 return -E1000_ERR_NVM;
 806
 807         /* Reset the firmware if using STM opcode. */
 808         if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
 809                 /*
 810                  * The enabling of and the actual reset must be done
 811                  * in two write cycles.
 812                  */
 813                 ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
 814                 e1e_flush();
 815                 ew32(HICR, E1000_HICR_FW_RESET);
 816         }
 817
 818         /* Commit the write to flash */
 819         eecd = er32(EECD) | E1000_EECD_FLUPD;
 820         ew32(EECD, eecd);
 821
 822         for (i = 0; i < E1000_FLASH_UPDATES; i++) {
 823                 usleep_range(1000, 2000);
 824                 if (!(er32(EECD) & E1000_EECD_FLUPD))
 825                         break;
 826         }
 827
 828         if (i == E1000_FLASH_UPDATES)
 829                 return -E1000_ERR_NVM;
 830
 831         return 0;
 832 }
 833
 834 /**
 835  *  e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
 836  *  @hw: pointer to the HW structure
 837  *
 838  *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
 839  *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
 840  **/
 841 static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
 842 {
 843         if (hw->nvm.type == e1000_nvm_flash_hw)
 844                 e1000_fix_nvm_checksum_82571(hw);
 845
 846         return e1000e_validate_nvm_checksum_generic(hw);
 847 }
 848
 849 /**
 850  *  e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
 851  *  @hw: pointer to the HW structure
 852  *  @offset: offset within the EEPROM to be written to
 853  *  @words: number of words to write
 854  *  @data: 16 bit word(s) to be written to the EEPROM
 855  *
 856  *  After checking for invalid values, poll the EEPROM to ensure the previous
 857  *  command has completed before trying to write the next word.  After write
 858  *  poll for completion.
 859  *
 860  *  If e1000e_update_nvm_checksum is not called after this function, the
 861  *  EEPROM will most likely contain an invalid checksum.
 862  **/
 863 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 864                                       u16 words, u16 *data)
 865 {
 866         struct e1000_nvm_info *nvm = &hw->nvm;
 867         u32 i, eewr = 0;
 868         s32 ret_val = 0;
 869
 870         /*
 871          * A check for invalid values:  offset too large, too many words,
 872          * and not enough words.
 873          */
 874         if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 875             (words == 0)) {
 876                 e_dbg("nvm parameter(s) out of bounds\n");
 877                 return -E1000_ERR_NVM;
 878         }
 879
 880         for (i = 0; i < words; i++) {
 881                 eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
 882                        ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
 883                        E1000_NVM_RW_REG_START;
 884
 885                 ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
 886                 if (ret_val)
 887                         break;
 888
 889                 ew32(EEWR, eewr);
 890
 891                 ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
 892                 if (ret_val)
 893                         break;
 894         }
 895
 896         return ret_val;
 897 }
 898
 899 /**
 900  *  e1000_get_cfg_done_82571 - Poll for configuration done
 901  *  @hw: pointer to the HW structure
 902  *
 903  *  Reads the management control register for the config done bit to be set.
 904  **/
 905 static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 906 {
 907         s32 timeout = PHY_CFG_TIMEOUT;
 908
 909         while (timeout) {
 910                 if (er32(EEMNGCTL) &
 911                     E1000_NVM_CFG_DONE_PORT_0)
 912                         break;
 913                 usleep_range(1000, 2000);
 914                 timeout--;
 915         }
 916         if (!timeout) {
 917                 e_dbg("MNG configuration cycle has not completed.\n");
 918                 return -E1000_ERR_RESET;
 919         }
 920
 921         return 0;
 922 }
 923
 924 /**
 925  *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
 926  *  @hw: pointer to the HW structure
 927  *  @active: true to enable LPLU, false to disable
 928  *
 929  *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
 930  *  this function also disables smart speed and vice versa.  LPLU will not be
 931  *  activated unless the device autonegotiation advertisement meets standards
 932  *  of either 10 or 10/100 or 10/100/1000 at all duplexes.  This is a function
 933  *  pointer entry point only called by PHY setup routines.
 934  **/
 935 static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
 936 {
 937         struct e1000_phy_info *phy = &hw->phy;
 938         s32 ret_val;
 939         u16 data;
 940
 941         ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
 942         if (ret_val)
 943                 return ret_val;
 944
 945         if (active) {
 946                 data |= IGP02E1000_PM_D0_LPLU;
 947                 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
 948                 if (ret_val)
 949                         return ret_val;
 950
 951                 /* When LPLU is enabled, we should disable SmartSpeed */
 952                 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
 953                 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
 954                 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
 955                 if (ret_val)
 956                         return ret_val;
 957         } else {
 958                 data &= ~IGP02E1000_PM_D0_LPLU;
 959                 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
 960                 /*
 961                  * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 962                  * during Dx states where the power conservation is most
 963                  * important.  During driver activity we should enable
 964                  * SmartSpeed, so performance is maintained.
 965                  */
 966                 if (phy->smart_speed == e1000_smart_speed_on) {
 967                         ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 968                                            &data);
 969                         if (ret_val)
 970                                 return ret_val;
 971
 972                         data |= IGP01E1000_PSCFR_SMART_SPEED;
 973                         ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 974                                            data);
 975                         if (ret_val)
 976                                 return ret_val;
 977                 } else if (phy->smart_speed == e1000_smart_speed_off) {
 978                         ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 979                                            &data);
 980                         if (ret_val)
 981                                 return ret_val;
 982
 983                         data &= ~IGP01E1000_PSCFR_SMART_SPEED;
 984                         ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 985                                            data);
 986                         if (ret_val)
 987                                 return ret_val;
 988                 }
 989         }
 990
 991         return 0;
 992 }
 993
 994 /**
 995  *  e1000_reset_hw_82571 - Reset hardware
 996  *  @hw: pointer to the HW structure
 997  *
 998  *  This resets the hardware into a known state.
 999  **/
1000 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
1001 {
1002         u32 ctrl, ctrl_ext, eecd;
1003         s32 ret_val;
1004
1005         /*
1006          * Prevent the PCI-E bus from sticking if there is no TLP connection
1007          * on the last TLP read/write transaction when MAC is reset.
1008          */
1009         ret_val = e1000e_disable_pcie_master(hw);
1010         if (ret_val)
1011                 e_dbg("PCI-E Master disable polling has failed.\n");
1012
1013         e_dbg("Masking off all interrupts\n");
1014         ew32(IMC, 0xffffffff);
1015
1016         ew32(RCTL, 0);
1017         ew32(TCTL, E1000_TCTL_PSP);
1018         e1e_flush();
1019
1020         usleep_range(10000, 20000);
1021
1022         /*
1023          * Must acquire the MDIO ownership before MAC reset.
1024          * Ownership defaults to firmware after a reset.
1025          */
1026         switch (hw->mac.type) {
1027         case e1000_82573:
1028                 ret_val = e1000_get_hw_semaphore_82573(hw);
1029                 break;
1030         case e1000_82574:
1031         case e1000_82583:
1032                 ret_val = e1000_get_hw_semaphore_82574(hw);
1033                 break;
1034         default:
1035                 break;
1036         }
1037         if (ret_val)
1038                 e_dbg("Cannot acquire MDIO ownership\n");
1039
1040         ctrl = er32(CTRL);
1041
1042         e_dbg("Issuing a global reset to MAC\n");
1043         ew32(CTRL, ctrl | E1000_CTRL_RST);
1044
1045         /* Must release MDIO ownership and mutex after MAC reset. */
1046         switch (hw->mac.type) {
1047         case e1000_82574:
1048         case e1000_82583:
1049                 e1000_put_hw_semaphore_82574(hw);
1050                 break;
1051         default:
1052                 break;
1053         }
1054
1055         if (hw->nvm.type == e1000_nvm_flash_hw) {
1056                 udelay(10);
1057                 ctrl_ext = er32(CTRL_EXT);
1058                 ctrl_ext |= E1000_CTRL_EXT_EE_RST;
1059                 ew32(CTRL_EXT, ctrl_ext);
1060                 e1e_flush();
1061         }
1062
1063         ret_val = e1000e_get_auto_rd_done(hw);
1064         if (ret_val)
1065                 /* We don't want to continue accessing MAC registers. */
1066                 return ret_val;
1067
1068         /*
1069          * Phy configuration from NVM just starts after EECD_AUTO_RD is set.
1070          * Need to wait for Phy configuration completion before accessing
1071          * NVM and Phy.
1072          */
1073
1074         switch (hw->mac.type) {
1075         case e1000_82571:
1076         case e1000_82572:
1077                 /*
1078                  * REQ and GNT bits need to be cleared when using AUTO_RD
1079                  * to access the EEPROM.
1080                  */
1081                 eecd = er32(EECD);
1082                 eecd &= ~(E1000_EECD_REQ | E1000_EECD_GNT);
1083                 ew32(EECD, eecd);
1084                 break;
1085         case e1000_82573:
1086         case e1000_82574:
1087         case e1000_82583:
1088                 msleep(25);
1089                 break;
1090         default:
1091                 break;
1092         }
1093
1094         /* Clear any pending interrupt events. */
1095         ew32(IMC, 0xffffffff);
1096         er32(ICR);
1097
1098         if (hw->mac.type == e1000_82571) {
1099                 /* Install any alternate MAC address into RAR0 */
1100                 ret_val = e1000_check_alt_mac_addr_generic(hw);
1101                 if (ret_val)
1102                         return ret_val;
1103
1104                 e1000e_set_laa_state_82571(hw, true);
1105         }
1106
1107         /* Reinitialize the 82571 serdes link state machine */
1108         if (hw->phy.media_type == e1000_media_type_internal_serdes)
1109                 hw->mac.serdes_link_state = e1000_serdes_link_down;
1110
1111         return 0;
1112 }
1113
1114 /**
1115  *  e1000_init_hw_82571 - Initialize hardware
1116  *  @hw: pointer to the HW structure
1117  *
1118  *  This inits the hardware readying it for operation.
1119  **/
1120 static s32 e1000_init_hw_82571(struct e1000_hw *hw)
1121 {
1122         struct e1000_mac_info *mac = &hw->mac;
1123         u32 reg_data;
1124         s32 ret_val;
1125         u16 i, rar_count = mac->rar_entry_count;
1126
1127         e1000_initialize_hw_bits_82571(hw);
1128
1129         /* Initialize identification LED */
1130         ret_val = mac->ops.id_led_init(hw);
1131         if (ret_val)
1132                 e_dbg("Error initializing identification LED\n");
1133                 /* This is not fatal and we should not stop init due to this */
1134
1135         /* Disabling VLAN filtering */
1136         e_dbg("Initializing the IEEE VLAN\n");
1137         mac->ops.clear_vfta(hw);
1138
1139         /* Setup the receive address. */
1140         /*
1141          * If, however, a locally administered address was assigned to the
1142          * 82571, we must reserve a RAR for it to work around an issue where
1143          * resetting one port will reload the MAC on the other port.
1144          */
1145         if (e1000e_get_laa_state_82571(hw))
1146                 rar_count--;
1147         e1000e_init_rx_addrs(hw, rar_count);
1148
1149         /* Zero out the Multicast HASH table */
1150         e_dbg("Zeroing the MTA\n");
1151         for (i = 0; i < mac->mta_reg_count; i++)
1152                 E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
1153
1154         /* Setup link and flow control */
1155         ret_val = mac->ops.setup_link(hw);
1156
1157         /* Set the transmit descriptor write-back policy */
1158         reg_data = er32(TXDCTL(0));
1159         reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
1160                    E1000_TXDCTL_FULL_TX_DESC_WB |
1161                    E1000_TXDCTL_COUNT_DESC;
1162         ew32(TXDCTL(0), reg_data);
1163
1164         /* ...for both queues. */
1165         switch (mac->type) {
1166         case e1000_82573:
1167                 e1000e_enable_tx_pkt_filtering(hw);
1168                 /* fall through */
1169         case e1000_82574:
1170         case e1000_82583:
1171                 reg_data = er32(GCR);
1172                 reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
1173                 ew32(GCR, reg_data);
1174                 break;
1175         default:
1176                 reg_data = er32(TXDCTL(1));
1177                 reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
1178                            E1000_TXDCTL_FULL_TX_DESC_WB |
1179                            E1000_TXDCTL_COUNT_DESC;
1180                 ew32(TXDCTL(1), reg_data);
1181                 break;
1182         }
1183
1184         /*
1185          * Clear all of the statistics registers (clear on read).  It is
1186          * important that we do this after we have tried to establish link
1187          * because the symbol error count will increment wildly if there
1188          * is no link.
1189          */
1190         e1000_clear_hw_cntrs_82571(hw);
1191
1192         return ret_val;
1193 }
1194
1195 /**
1196  *  e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
1197  *  @hw: pointer to the HW structure
1198  *
1199  *  Initializes required hardware-dependent bits needed for normal operation.
1200  **/
1201 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
1202 {
1203         u32 reg;
1204
1205         /* Transmit Descriptor Control 0 */
1206         reg = er32(TXDCTL(0));
1207         reg |= (1 << 22);
1208         ew32(TXDCTL(0), reg);
1209
1210         /* Transmit Descriptor Control 1 */
1211         reg = er32(TXDCTL(1));
1212         reg |= (1 << 22);
1213         ew32(TXDCTL(1), reg);
1214
1215         /* Transmit Arbitration Control 0 */
1216         reg = er32(TARC(0));
1217         reg &= ~(0xF << 27); /* 30:27 */
1218         switch (hw->mac.type) {
1219         case e1000_82571:
1220         case e1000_82572:
1221                 reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
1222                 break;
1223         case e1000_82574:
1224         case e1000_82583:
1225                 reg |= (1 << 26);
1226                 break;
1227         default:
1228                 break;
1229         }
1230         ew32(TARC(0), reg);
1231
1232         /* Transmit Arbitration Control 1 */
1233         reg = er32(TARC(1));
1234         switch (hw->mac.type) {
1235         case e1000_82571:
1236         case e1000_82572:
1237                 reg &= ~((1 << 29) | (1 << 30));
1238                 reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26);
1239                 if (er32(TCTL) & E1000_TCTL_MULR)
1240                         reg &= ~(1 << 28);
1241                 else
1242                         reg |= (1 << 28);
1243                 ew32(TARC(1), reg);
1244                 break;
1245         default:
1246                 break;
1247         }
1248
1249         /* Device Control */
1250         switch (hw->mac.type) {
1251         case e1000_82573:
1252         case e1000_82574:
1253         case e1000_82583:
1254                 reg = er32(CTRL);
1255                 reg &= ~(1 << 29);
1256                 ew32(CTRL, reg);
1257                 break;
1258         default:
1259                 break;
1260         }
1261
1262         /* Extended Device Control */
1263         switch (hw->mac.type) {
1264         case e1000_82573:
1265         case e1000_82574:
1266         case e1000_82583:
1267                 reg = er32(CTRL_EXT);
1268                 reg &= ~(1 << 23);
1269                 reg |= (1 << 22);
1270                 ew32(CTRL_EXT, reg);
1271                 break;
1272         default:
1273                 break;
1274         }
1275
1276         if (hw->mac.type == e1000_82571) {
1277                 reg = er32(PBA_ECC);
1278                 reg |= E1000_PBA_ECC_CORR_EN;
1279                 ew32(PBA_ECC, reg);
1280         }
1281
1282         /*
1283          * Workaround for hardware errata.
1284          * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
1285          */
1286         if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
1287                 reg = er32(CTRL_EXT);
1288                 reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
1289                 ew32(CTRL_EXT, reg);
1290         }
1291
1292         /*
1293          * Disable IPv6 extension header parsing because some malformed
1294          * IPv6 headers can hang the Rx.
1295          */
1296         if (hw->mac.type <= e1000_82573) {
1297                 reg = er32(RFCTL);
1298                 reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
1299                 ew32(RFCTL, reg);
1300         }
1301
1302         /* PCI-Ex Control Registers */
1303         switch (hw->mac.type) {
1304         case e1000_82574:
1305         case e1000_82583:
1306                 reg = er32(GCR);
1307                 reg |= (1 << 22);
1308                 ew32(GCR, reg);
1309
1310                 /*
1311                  * Workaround for hardware errata.
1312                  * apply workaround for hardware errata documented in errata
1313                  * docs Fixes issue where some error prone or unreliable PCIe
1314                  * completions are occurring, particularly with ASPM enabled.
1315                  * Without fix, issue can cause Tx timeouts.
1316                  */
1317                 reg = er32(GCR2);
1318                 reg |= 1;
1319                 ew32(GCR2, reg);
1320                 break;
1321         default:
1322                 break;
1323         }
1324 }
1325
1326 /**
1327  *  e1000_clear_vfta_82571 - Clear VLAN filter table
1328  *  @hw: pointer to the HW structure
1329  *
1330  *  Clears the register array which contains the VLAN filter table by
1331  *  setting all the values to 0.
1332  **/
1333 static void e1000_clear_vfta_82571(struct e1000_hw *hw)
1334 {
1335         u32 offset;
1336         u32 vfta_value = 0;
1337         u32 vfta_offset = 0;
1338         u32 vfta_bit_in_reg = 0;
1339
1340         switch (hw->mac.type) {
1341         case e1000_82573:
1342         case e1000_82574:
1343         case e1000_82583:
1344                 if (hw->mng_cookie.vlan_id != 0) {
1345                         /*
1346                          * The VFTA is a 4096b bit-field, each identifying
1347                          * a single VLAN ID.  The following operations
1348                          * determine which 32b entry (i.e. offset) into the
1349                          * array we want to set the VLAN ID (i.e. bit) of
1350                          * the manageability unit.
1351                          */
1352                         vfta_offset = (hw->mng_cookie.vlan_id >>
1353                                        E1000_VFTA_ENTRY_SHIFT) &
1354                                       E1000_VFTA_ENTRY_MASK;
1355                         vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
1356                                                E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
1357                 }
1358                 break;
1359         default:
1360                 break;
1361         }
1362         for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
1363                 /*
1364                  * If the offset we want to clear is the same offset of the
1365                  * manageability VLAN ID, then clear all bits except that of
1366                  * the manageability unit.
1367                  */
1368                 vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
1369                 E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
1370                 e1e_flush();
1371         }
1372 }
1373
1374 /**
1375  *  e1000_check_mng_mode_82574 - Check manageability is enabled
1376  *  @hw: pointer to the HW structure
1377  *
1378  *  Reads the NVM Initialization Control Word 2 and returns true
1379  *  (>0) if any manageability is enabled, else false (0).
1380  **/
1381 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
1382 {
1383         u16 data;
1384
1385         e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
1386         return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
1387 }
1388
1389 /**
1390  *  e1000_led_on_82574 - Turn LED on
1391  *  @hw: pointer to the HW structure
1392  *
1393  *  Turn LED on.
1394  **/
1395 static s32 e1000_led_on_82574(struct e1000_hw *hw)
1396 {
1397         u32 ctrl;
1398         u32 i;
1399
1400         ctrl = hw->mac.ledctl_mode2;
1401         if (!(E1000_STATUS_LU & er32(STATUS))) {
1402                 /*
1403                  * If no link, then turn LED on by setting the invert bit
1404                  * for each LED that's "on" (0x0E) in ledctl_mode2.
1405                  */
1406                 for (i = 0; i < 4; i++)
1407                         if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
1408                             E1000_LEDCTL_MODE_LED_ON)
1409                                 ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
1410         }
1411         ew32(LEDCTL, ctrl);
1412
1413         return 0;
1414 }
1415
1416 /**
1417  *  e1000_check_phy_82574 - check 82574 phy hung state
1418  *  @hw: pointer to the HW structure
1419  *
1420  *  Returns whether phy is hung or not
1421  **/
1422 bool e1000_check_phy_82574(struct e1000_hw *hw)
1423 {
1424         u16 status_1kbt = 0;
1425         u16 receive_errors = 0;
1426         s32 ret_val = 0;
1427
1428         /*
1429          * Read PHY Receive Error counter first, if its is max - all F's then
1430          * read the Base1000T status register If both are max then PHY is hung.
1431          */
1432         ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
1433         if (ret_val)
1434                 return false;
1435         if (receive_errors == E1000_RECEIVE_ERROR_MAX)  {
1436                 ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
1437                 if (ret_val)
1438                         return false;
1439                 if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
1440                     E1000_IDLE_ERROR_COUNT_MASK)
1441                         return true;
1442         }
1443
1444         return false;
1445 }
1446
1447 /**
1448  *  e1000_setup_link_82571 - Setup flow control and link settings
1449  *  @hw: pointer to the HW structure
1450  *
1451  *  Determines which flow control settings to use, then configures flow
1452  *  control.  Calls the appropriate media-specific link configuration
1453  *  function.  Assuming the adapter has a valid link partner, a valid link
1454  *  should be established.  Assumes the hardware has previously been reset
1455  *  and the transmitter and receiver are not enabled.
1456  **/
1457 static s32 e1000_setup_link_82571(struct e1000_hw *hw)
1458 {
1459         /*
1460          * 82573 does not have a word in the NVM to determine
1461          * the default flow control setting, so we explicitly
1462          * set it to full.
1463          */
1464         switch (hw->mac.type) {
1465         case e1000_82573:
1466         case e1000_82574:
1467         case e1000_82583:
1468                 if (hw->fc.requested_mode == e1000_fc_default)
1469                         hw->fc.requested_mode = e1000_fc_full;
1470                 break;
1471         default:
1472                 break;
1473         }
1474
1475         return e1000e_setup_link_generic(hw);
1476 }
1477
1478 /**
1479  *  e1000_setup_copper_link_82571 - Configure copper link settings
1480  *  @hw: pointer to the HW structure
1481  *
1482  *  Configures the link for auto-neg or forced speed and duplex.  Then we check
1483  *  for link, once link is established calls to configure collision distance
1484  *  and flow control are called.
1485  **/
1486 static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
1487 {
1488         u32 ctrl;
1489         s32 ret_val;
1490
1491         ctrl = er32(CTRL);
1492         ctrl |= E1000_CTRL_SLU;
1493         ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
1494         ew32(CTRL, ctrl);
1495
1496         switch (hw->phy.type) {
1497         case e1000_phy_m88:
1498         case e1000_phy_bm:
1499                 ret_val = e1000e_copper_link_setup_m88(hw);
1500                 break;
1501         case e1000_phy_igp_2:
1502                 ret_val = e1000e_copper_link_setup_igp(hw);
1503                 break;
1504         default:
1505                 return -E1000_ERR_PHY;
1506                 break;
1507         }
1508
1509         if (ret_val)
1510                 return ret_val;
1511
1512         return e1000e_setup_copper_link(hw);
1513 }
1514
1515 /**
1516  *  e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
1517  *  @hw: pointer to the HW structure
1518  *
1519  *  Configures collision distance and flow control for fiber and serdes links.
1520  *  Upon successful setup, poll for link.
1521  **/
1522 static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
1523 {
1524         switch (hw->mac.type) {
1525         case e1000_82571:
1526         case e1000_82572:
1527                 /*
1528                  * If SerDes loopback mode is entered, there is no form
1529                  * of reset to take the adapter out of that mode.  So we
1530                  * have to explicitly take the adapter out of loopback
1531                  * mode.  This prevents drivers from twiddling their thumbs
1532                  * if another tool failed to take it out of loopback mode.
1533                  */
1534                 ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
1535                 break;
1536         default:
1537                 break;
1538         }
1539
1540         return e1000e_setup_fiber_serdes_link(hw);
1541 }
1542
1543 /**
1544  *  e1000_check_for_serdes_link_82571 - Check for link (Serdes)
1545  *  @hw: pointer to the HW structure
1546  *
1547  *  Reports the link state as up or down.
1548  *
1549  *  If autonegotiation is supported by the link partner, the link state is
1550  *  determined by the result of autonegotiation. This is the most likely case.
1551  *  If autonegotiation is not supported by the link partner, and the link
1552  *  has a valid signal, force the link up.
1553  *
1554  *  The link state is represented internally here by 4 states:
1555  *
1556  *  1) down
1557  *  2) autoneg_progress
1558  *  3) autoneg_complete (the link successfully autonegotiated)
1559  *  4) forced_up (the link has been forced up, it did not autonegotiate)
1560  *
1561  **/
1562 static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
1563 {
1564         struct e1000_mac_info *mac = &hw->mac;
1565         u32 rxcw;
1566         u32 ctrl;
1567         u32 status;
1568         u32 txcw;
1569         u32 i;
1570         s32 ret_val = 0;
1571
1572         ctrl = er32(CTRL);
1573         status = er32(STATUS);
1574         rxcw = er32(RXCW);
1575         /* SYNCH bit and IV bit are sticky */
1576         udelay(10);
1577         rxcw = er32(RXCW);
1578
1579         if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
1580
1581                 /* Receiver is synchronized with no invalid bits.  */
1582                 switch (mac->serdes_link_state) {
1583                 case e1000_serdes_link_autoneg_complete:
1584                         if (!(status & E1000_STATUS_LU)) {
1585                                 /*
1586                                  * We have lost link, retry autoneg before
1587                                  * reporting link failure
1588                                  */
1589                                 mac->serdes_link_state =
1590                                     e1000_serdes_link_autoneg_progress;
1591                                 mac->serdes_has_link = false;
1592                                 e_dbg("AN_UP     -> AN_PROG\n");
1593                         } else {
1594                                 mac->serdes_has_link = true;
1595                         }
1596                         break;
1597
1598                 case e1000_serdes_link_forced_up:
1599                         /*
1600                          * If we are receiving /C/ ordered sets, re-enable
1601                          * auto-negotiation in the TXCW register and disable
1602                          * forced link in the Device Control register in an
1603                          * attempt to auto-negotiate with our link partner.
1604                          * If the partner code word is null, stop forcing
1605                          * and restart auto negotiation.
1606                          */
1607                         if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW))  {
1608                                 /* Enable autoneg, and unforce link up */
1609                                 ew32(TXCW, mac->txcw);
1610                                 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
1611                                 mac->serdes_link_state =
1612                                     e1000_serdes_link_autoneg_progress;
1613                                 mac->serdes_has_link = false;
1614                                 e_dbg("FORCED_UP -> AN_PROG\n");
1615                         } else {
1616                                 mac->serdes_has_link = true;
1617                         }
1618                         break;
1619
1620                 case e1000_serdes_link_autoneg_progress:
1621                         if (rxcw & E1000_RXCW_C) {
1622                                 /*
1623                                  * We received /C/ ordered sets, meaning the
1624                                  * link partner has autonegotiated, and we can
1625                                  * trust the Link Up (LU) status bit.
1626                                  */
1627                                 if (status & E1000_STATUS_LU) {
1628                                         mac->serdes_link_state =
1629                                             e1000_serdes_link_autoneg_complete;
1630                                         e_dbg("AN_PROG   -> AN_UP\n");
1631                                         mac->serdes_has_link = true;
1632                                 } else {
1633                                         /* Autoneg completed, but failed. */
1634                                         mac->serdes_link_state =
1635                                             e1000_serdes_link_down;
1636                                         e_dbg("AN_PROG   -> DOWN\n");
1637                                 }
1638                         } else {
1639                                 /*
1640                                  * The link partner did not autoneg.
1641                                  * Force link up and full duplex, and change
1642                                  * state to forced.
1643                                  */
1644                                 ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
1645                                 ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
1646                                 ew32(CTRL, ctrl);
1647
1648                                 /* Configure Flow Control after link up. */
1649                                 ret_val = e1000e_config_fc_after_link_up(hw);
1650                                 if (ret_val) {
1651                                         e_dbg("Error config flow control\n");
1652                                         break;
1653                                 }
1654                                 mac->serdes_link_state =
1655                                     e1000_serdes_link_forced_up;
1656                                 mac->serdes_has_link = true;
1657                                 e_dbg("AN_PROG   -> FORCED_UP\n");
1658                         }
1659                         break;
1660
1661                 case e1000_serdes_link_down:
1662                 default:
1663                         /*
1664                          * The link was down but the receiver has now gained
1665                          * valid sync, so lets see if we can bring the link
1666                          * up.
1667                          */
1668                         ew32(TXCW, mac->txcw);
1669                         ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
1670                         mac->serdes_link_state =
1671                             e1000_serdes_link_autoneg_progress;
1672                         mac->serdes_has_link = false;
1673                         e_dbg("DOWN      -> AN_PROG\n");
1674                         break;
1675                 }
1676         } else {
1677                 if (!(rxcw & E1000_RXCW_SYNCH)) {
1678                         mac->serdes_has_link = false;
1679                         mac->serdes_link_state = e1000_serdes_link_down;
1680                         e_dbg("ANYSTATE  -> DOWN\n");
1681                 } else {
1682                         /*
1683                          * Check several times, if Sync and Config
1684                          * both are consistently 1 then simply ignore
1685                          * the Invalid bit and restart Autoneg
1686                          */
1687                         for (i = 0; i < AN_RETRY_COUNT; i++) {
1688                                 udelay(10);
1689                                 rxcw = er32(RXCW);
1690                                 if ((rxcw & E1000_RXCW_IV) &&
1691                                     !((rxcw & E1000_RXCW_SYNCH) &&
1692                                       (rxcw & E1000_RXCW_C))) {
1693                                         mac->serdes_has_link = false;
1694                                         mac->serdes_link_state =
1695                                             e1000_serdes_link_down;
1696                                         e_dbg("ANYSTATE  -> DOWN\n");
1697                                         break;
1698                                 }
1699                         }
1700
1701                         if (i == AN_RETRY_COUNT) {
1702                                 txcw = er32(TXCW);
1703                                 txcw |= E1000_TXCW_ANE;
1704                                 ew32(TXCW, txcw);
1705                                 mac->serdes_link_state =
1706                                     e1000_serdes_link_autoneg_progress;
1707                                 mac->serdes_has_link = false;
1708                                 e_dbg("ANYSTATE  -> AN_PROG\n");
1709                         }
1710                 }
1711         }
1712
1713         return ret_val;
1714 }
1715
1716 /**
1717  *  e1000_valid_led_default_82571 - Verify a valid default LED config
1718  *  @hw: pointer to the HW structure
1719  *  @data: pointer to the NVM (EEPROM)
1720  *
1721  *  Read the EEPROM for the current default LED configuration.  If the
1722  *  LED configuration is not valid, set to a valid LED configuration.
1723  **/
1724 static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
1725 {
1726         s32 ret_val;
1727
1728         ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
1729         if (ret_val) {
1730                 e_dbg("NVM Read Error\n");
1731                 return ret_val;
1732         }
1733
1734         switch (hw->mac.type) {
1735         case e1000_82573:
1736         case e1000_82574:
1737         case e1000_82583:
1738                 if (*data == ID_LED_RESERVED_F746)
1739                         *data = ID_LED_DEFAULT_82573;
1740                 break;
1741         default:
1742                 if (*data == ID_LED_RESERVED_0000 ||
1743                     *data == ID_LED_RESERVED_FFFF)
1744                         *data = ID_LED_DEFAULT;
1745                 break;
1746         }
1747
1748         return 0;
1749 }
1750
1751 /**
1752  *  e1000e_get_laa_state_82571 - Get locally administered address state
1753  *  @hw: pointer to the HW structure
1754  *
1755  *  Retrieve and return the current locally administered address state.
1756  **/
1757 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
1758 {
1759         if (hw->mac.type != e1000_82571)
1760                 return false;
1761
1762         return hw->dev_spec.e82571.laa_is_present;
1763 }
1764
1765 /**
1766  *  e1000e_set_laa_state_82571 - Set locally administered address state
1767  *  @hw: pointer to the HW structure
1768  *  @state: enable/disable locally administered address
1769  *
1770  *  Enable/Disable the current locally administered address state.
1771  **/
1772 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
1773 {
1774         if (hw->mac.type != e1000_82571)
1775                 return;
1776
1777         hw->dev_spec.e82571.laa_is_present = state;
1778
1779         /* If workaround is activated... */
1780         if (state)
1781                 /*
1782                  * Hold a copy of the LAA in RAR[14] This is done so that
1783                  * between the time RAR[0] gets clobbered and the time it
1784                  * gets fixed, the actual LAA is in one of the RARs and no
1785                  * incoming packets directed to this port are dropped.
1786                  * Eventually the LAA will be in RAR[0] and RAR[14].
1787                  */
1788                 hw->mac.ops.rar_set(hw, hw->mac.addr,
1789                                     hw->mac.rar_entry_count - 1);
1790 }
1791
1792 /**
1793  *  e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
1794  *  @hw: pointer to the HW structure
1795  *
1796  *  Verifies that the EEPROM has completed the update.  After updating the
1797  *  EEPROM, we need to check bit 15 in work 0x23 for the checksum fix.  If
1798  *  the checksum fix is not implemented, we need to set the bit and update
1799  *  the checksum.  Otherwise, if bit 15 is set and the checksum is incorrect,
1800  *  we need to return bad checksum.
1801  **/
1802 static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
1803 {
1804         struct e1000_nvm_info *nvm = &hw->nvm;
1805         s32 ret_val;
1806         u16 data;
1807
1808         if (nvm->type != e1000_nvm_flash_hw)
1809                 return 0;
1810
1811         /*
1812          * Check bit 4 of word 10h.  If it is 0, firmware is done updating
1813          * 10h-12h.  Checksum may need to be fixed.
1814          */
1815         ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
1816         if (ret_val)
1817                 return ret_val;
1818
1819         if (!(data & 0x10)) {
1820                 /*
1821                  * Read 0x23 and check bit 15.  This bit is a 1
1822                  * when the checksum has already been fixed.  If
1823                  * the checksum is still wrong and this bit is a
1824                  * 1, we need to return bad checksum.  Otherwise,
1825                  * we need to set this bit to a 1 and update the
1826                  * checksum.
1827                  */
1828                 ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
1829                 if (ret_val)
1830                         return ret_val;
1831
1832                 if (!(data & 0x8000)) {
1833                         data |= 0x8000;
1834                         ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
1835                         if (ret_val)
1836                                 return ret_val;
1837                         ret_val = e1000e_update_nvm_checksum(hw);
1838                 }
1839         }
1840
1841         return 0;
1842 }
1843
1844 /**
1845  *  e1000_read_mac_addr_82571 - Read device MAC address
1846  *  @hw: pointer to the HW structure
1847  **/
1848 static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
1849 {
1850         if (hw->mac.type == e1000_82571) {
1851                 s32 ret_val = 0;
1852
1853                 /*
1854                  * If there's an alternate MAC address place it in RAR0
1855                  * so that it will override the Si installed default perm
1856                  * address.
1857                  */
1858                 ret_val = e1000_check_alt_mac_addr_generic(hw);
1859                 if (ret_val)
1860                         return ret_val;
1861         }
1862
1863         return e1000_read_mac_addr_generic(hw);
1864 }
1865
1866 /**
1867  * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
1868  * @hw: pointer to the HW structure
1869  *
1870  * In the case of a PHY power down to save power, or to turn off link during a
1871  * driver unload, or wake on lan is not enabled, remove the link.
1872  **/
1873 static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
1874 {
1875         struct e1000_phy_info *phy = &hw->phy;
1876         struct e1000_mac_info *mac = &hw->mac;
1877
1878         if (!phy->ops.check_reset_block)
1879                 return;
1880
1881         /* If the management interface is not enabled, then power down */
1882         if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
1883                 e1000_power_down_phy_copper(hw);
1884 }
1885
1886 /**
1887  *  e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
1888  *  @hw: pointer to the HW structure
1889  *
1890  *  Clears the hardware counters by reading the counter registers.
1891  **/
1892 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
1893 {
1894         e1000e_clear_hw_cntrs_base(hw);
1895
1896         er32(PRC64);
1897         er32(PRC127);
1898         er32(PRC255);
1899         er32(PRC511);
1900         er32(PRC1023);
1901         er32(PRC1522);
1902         er32(PTC64);
1903         er32(PTC127);
1904         er32(PTC255);
1905         er32(PTC511);
1906         er32(PTC1023);
1907         er32(PTC1522);
1908
1909         er32(ALGNERRC);
1910         er32(RXERRC);
1911         er32(TNCRS);
1912         er32(CEXTERR);
1913         er32(TSCTC);
1914         er32(TSCTFC);
1915
1916         er32(MGTPRC);
1917         er32(MGTPDC);
1918         er32(MGTPTC);
1919
1920         er32(IAC);
1921         er32(ICRXOC);
1922
1923         er32(ICRXPTC);
1924         er32(ICRXATC);
1925         er32(ICTXPTC);
1926         er32(ICTXATC);
1927         er32(ICTXQEC);
1928         er32(ICTXQMTC);
1929         er32(ICRXDMTC);
1930 }
1931
1932 static const struct e1000_mac_operations e82571_mac_ops = {
1933         /* .check_mng_mode: mac type dependent */
1934         /* .check_for_link: media type dependent */
1935         .id_led_init            = e1000e_id_led_init_generic,
1936         .cleanup_led            = e1000e_cleanup_led_generic,
1937         .clear_hw_cntrs         = e1000_clear_hw_cntrs_82571,
1938         .get_bus_info           = e1000e_get_bus_info_pcie,
1939         .set_lan_id             = e1000_set_lan_id_multi_port_pcie,
1940         /* .get_link_up_info: media type dependent */
1941         /* .led_on: mac type dependent */
1942         .led_off                = e1000e_led_off_generic,
1943         .update_mc_addr_list    = e1000e_update_mc_addr_list_generic,
1944         .write_vfta             = e1000_write_vfta_generic,
1945         .clear_vfta             = e1000_clear_vfta_82571,
1946         .reset_hw               = e1000_reset_hw_82571,
1947         .init_hw                = e1000_init_hw_82571,
1948         .setup_link             = e1000_setup_link_82571,
1949         /* .setup_physical_interface: media type dependent */
1950         .setup_led              = e1000e_setup_led_generic,
1951         .config_collision_dist  = e1000e_config_collision_dist_generic,
1952         .read_mac_addr          = e1000_read_mac_addr_82571,
1953         .rar_set                = e1000e_rar_set_generic,
1954 };
1955
1956 static const struct e1000_phy_operations e82_phy_ops_igp = {
1957         .acquire                = e1000_get_hw_semaphore_82571,
1958         .check_polarity         = e1000_check_polarity_igp,
1959         .check_reset_block      = e1000e_check_reset_block_generic,
1960         .commit                 = NULL,
1961         .force_speed_duplex     = e1000e_phy_force_speed_duplex_igp,
1962         .get_cfg_done           = e1000_get_cfg_done_82571,
1963         .get_cable_length       = e1000e_get_cable_length_igp_2,
1964         .get_info               = e1000e_get_phy_info_igp,
1965         .read_reg               = e1000e_read_phy_reg_igp,
1966         .release                = e1000_put_hw_semaphore_82571,
1967         .reset                  = e1000e_phy_hw_reset_generic,
1968         .set_d0_lplu_state      = e1000_set_d0_lplu_state_82571,
1969         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
1970         .write_reg              = e1000e_write_phy_reg_igp,
1971         .cfg_on_link_up         = NULL,
1972 };
1973
1974 static const struct e1000_phy_operations e82_phy_ops_m88 = {
1975         .acquire                = e1000_get_hw_semaphore_82571,
1976         .check_polarity         = e1000_check_polarity_m88,
1977         .check_reset_block      = e1000e_check_reset_block_generic,
1978         .commit                 = e1000e_phy_sw_reset,
1979         .force_speed_duplex     = e1000e_phy_force_speed_duplex_m88,
1980         .get_cfg_done           = e1000e_get_cfg_done,
1981         .get_cable_length       = e1000e_get_cable_length_m88,
1982         .get_info               = e1000e_get_phy_info_m88,
1983         .read_reg               = e1000e_read_phy_reg_m88,
1984         .release                = e1000_put_hw_semaphore_82571,
1985         .reset                  = e1000e_phy_hw_reset_generic,
1986         .set_d0_lplu_state      = e1000_set_d0_lplu_state_82571,
1987         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
1988         .write_reg              = e1000e_write_phy_reg_m88,
1989         .cfg_on_link_up         = NULL,
1990 };
1991
1992 static const struct e1000_phy_operations e82_phy_ops_bm = {
1993         .acquire                = e1000_get_hw_semaphore_82571,
1994         .check_polarity         = e1000_check_polarity_m88,
1995         .check_reset_block      = e1000e_check_reset_block_generic,
1996         .commit                 = e1000e_phy_sw_reset,
1997         .force_speed_duplex     = e1000e_phy_force_speed_duplex_m88,
1998         .get_cfg_done           = e1000e_get_cfg_done,
1999         .get_cable_length       = e1000e_get_cable_length_m88,
2000         .get_info               = e1000e_get_phy_info_m88,
2001         .read_reg               = e1000e_read_phy_reg_bm2,
2002         .release                = e1000_put_hw_semaphore_82571,
2003         .reset                  = e1000e_phy_hw_reset_generic,
2004         .set_d0_lplu_state      = e1000_set_d0_lplu_state_82571,
2005         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
2006         .write_reg              = e1000e_write_phy_reg_bm2,
2007         .cfg_on_link_up         = NULL,
2008 };
2009
2010 static const struct e1000_nvm_operations e82571_nvm_ops = {
2011         .acquire                = e1000_acquire_nvm_82571,
2012         .read                   = e1000e_read_nvm_eerd,
2013         .release                = e1000_release_nvm_82571,
2014         .reload                 = e1000e_reload_nvm_generic,
2015         .update                 = e1000_update_nvm_checksum_82571,
2016         .valid_led_default      = e1000_valid_led_default_82571,
2017         .validate               = e1000_validate_nvm_checksum_82571,
2018         .write                  = e1000_write_nvm_82571,
2019 };
2020
2021 const struct e1000_info e1000_82571_info = {
2022         .mac                    = e1000_82571,
2023         .flags                  = FLAG_HAS_HW_VLAN_FILTER
2024                                   | FLAG_HAS_JUMBO_FRAMES
2025                                   | FLAG_HAS_WOL
2026                                   | FLAG_APME_IN_CTRL3
2027                                   | FLAG_HAS_CTRLEXT_ON_LOAD
2028                                   | FLAG_HAS_SMART_POWER_DOWN
2029                                   | FLAG_RESET_OVERWRITES_LAA /* errata */
2030                                   | FLAG_TARC_SPEED_MODE_BIT /* errata */
2031                                   | FLAG_APME_CHECK_PORT_B,
2032         .flags2                 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
2033                                   | FLAG2_DMA_BURST,
2034         .pba                    = 38,
2035         .max_hw_frame_size      = DEFAULT_JUMBO,
2036         .get_variants           = e1000_get_variants_82571,
2037         .mac_ops                = &e82571_mac_ops,
2038         .phy_ops                = &e82_phy_ops_igp,
2039         .nvm_ops                = &e82571_nvm_ops,
2040 };
2041
2042 const struct e1000_info e1000_82572_info = {
2043         .mac                    = e1000_82572,
2044         .flags                  = FLAG_HAS_HW_VLAN_FILTER
2045                                   | FLAG_HAS_JUMBO_FRAMES
2046                                   | FLAG_HAS_WOL
2047                                   | FLAG_APME_IN_CTRL3
2048                                   | FLAG_HAS_CTRLEXT_ON_LOAD
2049                                   | FLAG_TARC_SPEED_MODE_BIT, /* errata */
2050         .flags2                 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
2051                                   | FLAG2_DMA_BURST,
2052         .pba                    = 38,
2053         .max_hw_frame_size      = DEFAULT_JUMBO,
2054         .get_variants           = e1000_get_variants_82571,
2055         .mac_ops                = &e82571_mac_ops,
2056         .phy_ops                = &e82_phy_ops_igp,
2057         .nvm_ops                = &e82571_nvm_ops,
2058 };
2059
2060 const struct e1000_info e1000_82573_info = {
2061         .mac                    = e1000_82573,
2062         .flags                  = FLAG_HAS_HW_VLAN_FILTER
2063                                   | FLAG_HAS_WOL
2064                                   | FLAG_APME_IN_CTRL3
2065                                   | FLAG_HAS_SMART_POWER_DOWN
2066                                   | FLAG_HAS_AMT
2067                                   | FLAG_HAS_SWSM_ON_LOAD,
2068         .flags2                 = FLAG2_DISABLE_ASPM_L1
2069                                   | FLAG2_DISABLE_ASPM_L0S,
2070         .pba                    = 20,
2071         .max_hw_frame_size      = ETH_FRAME_LEN + ETH_FCS_LEN,
2072         .get_variants           = e1000_get_variants_82571,
2073         .mac_ops                = &e82571_mac_ops,
2074         .phy_ops                = &e82_phy_ops_m88,
2075         .nvm_ops                = &e82571_nvm_ops,
2076 };
2077
2078 const struct e1000_info e1000_82574_info = {
2079         .mac                    = e1000_82574,
2080         .flags                  = FLAG_HAS_HW_VLAN_FILTER
2081                                   | FLAG_HAS_MSIX
2082                                   | FLAG_HAS_JUMBO_FRAMES
2083                                   | FLAG_HAS_WOL
2084                                   | FLAG_APME_IN_CTRL3
2085                                   | FLAG_HAS_SMART_POWER_DOWN
2086                                   | FLAG_HAS_AMT
2087                                   | FLAG_HAS_CTRLEXT_ON_LOAD,
2088         .flags2                  = FLAG2_CHECK_PHY_HANG
2089                                   | FLAG2_DISABLE_ASPM_L0S
2090                                   | FLAG2_DISABLE_ASPM_L1
2091                                   | FLAG2_NO_DISABLE_RX
2092                                   | FLAG2_DMA_BURST,
2093         .pba                    = 32,
2094         .max_hw_frame_size      = DEFAULT_JUMBO,
2095         .get_variants           = e1000_get_variants_82571,
2096         .mac_ops                = &e82571_mac_ops,
2097         .phy_ops                = &e82_phy_ops_bm,
2098         .nvm_ops                = &e82571_nvm_ops,
2099 };
2100
2101 const struct e1000_info e1000_82583_info = {
2102         .mac                    = e1000_82583,
2103         .flags                  = FLAG_HAS_HW_VLAN_FILTER
2104                                   | FLAG_HAS_WOL
2105                                   | FLAG_APME_IN_CTRL3
2106                                   | FLAG_HAS_SMART_POWER_DOWN
2107                                   | FLAG_HAS_AMT
2108                                   | FLAG_HAS_JUMBO_FRAMES
2109                                   | FLAG_HAS_CTRLEXT_ON_LOAD,
2110         .flags2                 = FLAG2_DISABLE_ASPM_L0S
2111                                   | FLAG2_NO_DISABLE_RX,
2112         .pba                    = 32,
2113         .max_hw_frame_size      = DEFAULT_JUMBO,
2114         .get_variants           = e1000_get_variants_82571,
2115         .mac_ops                = &e82571_mac_ops,
2116         .phy_ops                = &e82_phy_ops_bm,
2117         .nvm_ops                = &e82571_nvm_ops,
2118 };
2119