2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
14 * and probably many L2 switches ...
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/types.h>
39 #include <linux/fcntl.h>
40 #include <linux/interrupt.h>
41 #include <linux/ptrace.h>
42 #include <linux/ioport.h>
46 #include <linux/tcp.h>
47 #include <linux/udp.h>
48 #include <linux/slab.h>
49 #include <linux/string.h>
50 #include <linux/init.h>
51 #include <linux/timer.h>
52 #include <linux/socket.h>
53 #include <linux/ctype.h>
54 #include <linux/inet.h>
55 #include <linux/bitops.h>
58 #include <linux/uaccess.h>
59 #include <linux/errno.h>
60 #include <linux/netdevice.h>
61 #include <linux/inetdevice.h>
62 #include <linux/igmp.h>
63 #include <linux/etherdevice.h>
64 #include <linux/skbuff.h>
66 #include <linux/rtnetlink.h>
67 #include <linux/smp.h>
68 #include <linux/if_ether.h>
70 #include <linux/mii.h>
71 #include <linux/ethtool.h>
72 #include <linux/if_vlan.h>
73 #include <linux/if_bonding.h>
74 #include <linux/jiffies.h>
75 #include <linux/preempt.h>
76 #include <net/route.h>
77 #include <net/net_namespace.h>
78 #include <net/netns/generic.h>
79 #include <net/pkt_sched.h>
80 #include <linux/rculist.h>
85 /*---------------------------- Module parameters ----------------------------*/
87 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
88 #define BOND_LINK_MON_INTERV 0
89 #define BOND_LINK_ARP_INTERV 0
91 static int max_bonds = BOND_DEFAULT_MAX_BONDS;
92 static int tx_queues = BOND_DEFAULT_TX_QUEUES;
93 static int num_peer_notif = 1;
94 static int miimon = BOND_LINK_MON_INTERV;
97 static int use_carrier = 1;
100 static char *primary_reselect;
101 static char *lacp_rate;
102 static int min_links;
103 static char *ad_select;
104 static char *xmit_hash_policy;
105 static int arp_interval = BOND_LINK_ARP_INTERV;
106 static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
107 static char *arp_validate;
108 static char *arp_all_targets;
109 static char *fail_over_mac;
110 static int all_slaves_active;
111 static struct bond_params bonding_defaults;
112 static int resend_igmp = BOND_DEFAULT_RESEND_IGMP;
114 module_param(max_bonds, int, 0);
115 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
116 module_param(tx_queues, int, 0);
117 MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
118 module_param_named(num_grat_arp, num_peer_notif, int, 0644);
119 MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
120 "failover event (alias of num_unsol_na)");
121 module_param_named(num_unsol_na, num_peer_notif, int, 0644);
122 MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
123 "failover event (alias of num_grat_arp)");
124 module_param(miimon, int, 0);
125 MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
126 module_param(updelay, int, 0);
127 MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
128 module_param(downdelay, int, 0);
129 MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
131 module_param(use_carrier, int, 0);
132 MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
133 "0 for off, 1 for on (default)");
134 module_param(mode, charp, 0);
135 MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
136 "1 for active-backup, 2 for balance-xor, "
137 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
138 "6 for balance-alb");
139 module_param(primary, charp, 0);
140 MODULE_PARM_DESC(primary, "Primary network device to use");
141 module_param(primary_reselect, charp, 0);
142 MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
144 "0 for always (default), "
145 "1 for only if speed of primary is "
147 "2 for only on active slave "
149 module_param(lacp_rate, charp, 0);
150 MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
151 "0 for slow, 1 for fast");
152 module_param(ad_select, charp, 0);
153 MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; "
154 "0 for stable (default), 1 for bandwidth, "
156 module_param(min_links, int, 0);
157 MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier");
159 module_param(xmit_hash_policy, charp, 0);
160 MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; "
161 "0 for layer 2 (default), 1 for layer 3+4, "
163 module_param(arp_interval, int, 0);
164 MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
165 module_param_array(arp_ip_target, charp, NULL, 0);
166 MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
167 module_param(arp_validate, charp, 0);
168 MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
169 "0 for none (default), 1 for active, "
170 "2 for backup, 3 for all");
171 module_param(arp_all_targets, charp, 0);
172 MODULE_PARM_DESC(arp_all_targets, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
173 module_param(fail_over_mac, charp, 0);
174 MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
175 "the same MAC; 0 for none (default), "
176 "1 for active, 2 for follow");
177 module_param(all_slaves_active, int, 0);
178 MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface"
179 "by setting active flag for all slaves; "
180 "0 for never (default), 1 for always.");
181 module_param(resend_igmp, int, 0);
182 MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
185 /*----------------------------- Global variables ----------------------------*/
187 #ifdef CONFIG_NET_POLL_CONTROLLER
188 atomic_t netpoll_block_tx = ATOMIC_INIT(0);
191 int bond_net_id __read_mostly;
193 static __be32 arp_target[BOND_MAX_ARP_TARGETS];
194 static int arp_ip_count;
195 static int bond_mode = BOND_MODE_ROUNDROBIN;
196 static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
197 static int lacp_fast;
199 const struct bond_parm_tbl bond_lacp_tbl[] = {
200 { "slow", AD_LACP_SLOW},
201 { "fast", AD_LACP_FAST},
205 const struct bond_parm_tbl bond_mode_tbl[] = {
206 { "balance-rr", BOND_MODE_ROUNDROBIN},
207 { "active-backup", BOND_MODE_ACTIVEBACKUP},
208 { "balance-xor", BOND_MODE_XOR},
209 { "broadcast", BOND_MODE_BROADCAST},
210 { "802.3ad", BOND_MODE_8023AD},
211 { "balance-tlb", BOND_MODE_TLB},
212 { "balance-alb", BOND_MODE_ALB},
216 const struct bond_parm_tbl xmit_hashtype_tbl[] = {
217 { "layer2", BOND_XMIT_POLICY_LAYER2},
218 { "layer3+4", BOND_XMIT_POLICY_LAYER34},
219 { "layer2+3", BOND_XMIT_POLICY_LAYER23},
223 const struct bond_parm_tbl arp_all_targets_tbl[] = {
224 { "any", BOND_ARP_TARGETS_ANY},
225 { "all", BOND_ARP_TARGETS_ALL},
229 const struct bond_parm_tbl arp_validate_tbl[] = {
230 { "none", BOND_ARP_VALIDATE_NONE},
231 { "active", BOND_ARP_VALIDATE_ACTIVE},
232 { "backup", BOND_ARP_VALIDATE_BACKUP},
233 { "all", BOND_ARP_VALIDATE_ALL},
237 const struct bond_parm_tbl fail_over_mac_tbl[] = {
238 { "none", BOND_FOM_NONE},
239 { "active", BOND_FOM_ACTIVE},
240 { "follow", BOND_FOM_FOLLOW},
244 const struct bond_parm_tbl pri_reselect_tbl[] = {
245 { "always", BOND_PRI_RESELECT_ALWAYS},
246 { "better", BOND_PRI_RESELECT_BETTER},
247 { "failure", BOND_PRI_RESELECT_FAILURE},
251 struct bond_parm_tbl ad_select_tbl[] = {
252 { "stable", BOND_AD_STABLE},
253 { "bandwidth", BOND_AD_BANDWIDTH},
254 { "count", BOND_AD_COUNT},
258 /*-------------------------- Forward declarations ---------------------------*/
260 static int bond_init(struct net_device *bond_dev);
261 static void bond_uninit(struct net_device *bond_dev);
263 /*---------------------------- General routines -----------------------------*/
265 const char *bond_mode_name(int mode)
267 static const char *names[] = {
268 [BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
269 [BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
270 [BOND_MODE_XOR] = "load balancing (xor)",
271 [BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
272 [BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
273 [BOND_MODE_TLB] = "transmit load balancing",
274 [BOND_MODE_ALB] = "adaptive load balancing",
277 if (mode < BOND_MODE_ROUNDROBIN || mode > BOND_MODE_ALB)
283 /*---------------------------------- VLAN -----------------------------------*/
286 * bond_add_vlan - add a new vlan id on bond
287 * @bond: bond that got the notification
288 * @vlan_id: the vlan id to add
290 * Returns -ENOMEM if allocation failed.
292 static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
294 struct vlan_entry *vlan;
296 pr_debug("bond: %s, vlan id %d\n",
297 (bond ? bond->dev->name : "None"), vlan_id);
299 vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
303 INIT_LIST_HEAD(&vlan->vlan_list);
304 vlan->vlan_id = vlan_id;
306 write_lock_bh(&bond->lock);
308 list_add_tail(&vlan->vlan_list, &bond->vlan_list);
310 write_unlock_bh(&bond->lock);
312 pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);
318 * bond_del_vlan - delete a vlan id from bond
319 * @bond: bond that got the notification
320 * @vlan_id: the vlan id to delete
322 * returns -ENODEV if @vlan_id was not found in @bond.
324 static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
326 struct vlan_entry *vlan;
329 pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
332 write_lock_bh(&bond->lock);
334 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
335 if (vlan->vlan_id == vlan_id) {
336 list_del(&vlan->vlan_list);
338 if (bond_is_lb(bond))
339 bond_alb_clear_vlan(bond, vlan_id);
341 pr_debug("removed VLAN ID %d from bond %s\n",
342 vlan_id, bond->dev->name);
351 pr_debug("couldn't find VLAN ID %d in bond %s\n",
352 vlan_id, bond->dev->name);
355 write_unlock_bh(&bond->lock);
356 unblock_netpoll_tx();
361 * bond_next_vlan - safely skip to the next item in the vlans list.
362 * @bond: the bond we're working on
363 * @curr: item we're advancing from
365 * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
366 * or @curr->next otherwise (even if it is @curr itself again).
368 * Caller must hold bond->lock
370 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
372 struct vlan_entry *next, *last;
374 if (list_empty(&bond->vlan_list))
378 next = list_entry(bond->vlan_list.next,
379 struct vlan_entry, vlan_list);
381 last = list_entry(bond->vlan_list.prev,
382 struct vlan_entry, vlan_list);
384 next = list_entry(bond->vlan_list.next,
385 struct vlan_entry, vlan_list);
387 next = list_entry(curr->vlan_list.next,
388 struct vlan_entry, vlan_list);
396 * bond_dev_queue_xmit - Prepare skb for xmit.
398 * @bond: bond device that got this skb for tx.
399 * @skb: hw accel VLAN tagged skb to transmit
400 * @slave_dev: slave that is supposed to xmit this skbuff
402 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
403 struct net_device *slave_dev)
405 skb->dev = slave_dev;
407 BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
408 sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping));
409 skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
411 if (unlikely(netpoll_tx_running(bond->dev)))
412 bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
420 * In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
421 * We don't protect the slave list iteration with a lock because:
422 * a. This operation is performed in IOCTL context,
423 * b. The operation is protected by the RTNL semaphore in the 8021q code,
424 * c. Holding a lock with BH disabled while directly calling a base driver
425 * entry point is generally a BAD idea.
427 * The design of synchronization/protection for this operation in the 8021q
428 * module is good for one or more VLAN devices over a single physical device
429 * and cannot be extended for a teaming solution like bonding, so there is a
430 * potential race condition here where a net device from the vlan group might
431 * be referenced (either by a base driver or the 8021q code) while it is being
432 * removed from the system. However, it turns out we're not making matters
433 * worse, and if it works for regular VLAN usage it will work here too.
437 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
438 * @bond_dev: bonding net device that got called
439 * @vid: vlan id being added
441 static int bond_vlan_rx_add_vid(struct net_device *bond_dev,
442 __be16 proto, u16 vid)
444 struct bonding *bond = netdev_priv(bond_dev);
448 bond_for_each_slave(bond, slave) {
449 res = vlan_vid_add(slave->dev, proto, vid);
454 res = bond_add_vlan(bond, vid);
456 pr_err("%s: Error: Failed to add vlan id %d\n",
457 bond_dev->name, vid);
464 /* unwind from head to the slave that failed */
465 bond_for_each_slave_continue_reverse(bond, slave)
466 vlan_vid_del(slave->dev, proto, vid);
472 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
473 * @bond_dev: bonding net device that got called
474 * @vid: vlan id being removed
476 static int bond_vlan_rx_kill_vid(struct net_device *bond_dev,
477 __be16 proto, u16 vid)
479 struct bonding *bond = netdev_priv(bond_dev);
483 bond_for_each_slave(bond, slave)
484 vlan_vid_del(slave->dev, proto, vid);
486 res = bond_del_vlan(bond, vid);
488 pr_err("%s: Error: Failed to remove vlan id %d\n",
489 bond_dev->name, vid);
496 static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev)
498 struct vlan_entry *vlan;
501 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
502 res = vlan_vid_add(slave_dev, htons(ETH_P_8021Q),
505 pr_warning("%s: Failed to add vlan id %d to device %s\n",
506 bond->dev->name, vlan->vlan_id,
511 static void bond_del_vlans_from_slave(struct bonding *bond,
512 struct net_device *slave_dev)
514 struct vlan_entry *vlan;
516 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
519 vlan_vid_del(slave_dev, htons(ETH_P_8021Q), vlan->vlan_id);
523 /*------------------------------- Link status -------------------------------*/
526 * Set the carrier state for the master according to the state of its
527 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
528 * do special 802.3ad magic.
530 * Returns zero if carrier state does not change, nonzero if it does.
532 static int bond_set_carrier(struct bonding *bond)
536 if (list_empty(&bond->slave_list))
539 if (bond->params.mode == BOND_MODE_8023AD)
540 return bond_3ad_set_carrier(bond);
542 bond_for_each_slave(bond, slave) {
543 if (slave->link == BOND_LINK_UP) {
544 if (!netif_carrier_ok(bond->dev)) {
545 netif_carrier_on(bond->dev);
553 if (netif_carrier_ok(bond->dev)) {
554 netif_carrier_off(bond->dev);
561 * Get link speed and duplex from the slave's base driver
562 * using ethtool. If for some reason the call fails or the
563 * values are invalid, set speed and duplex to -1,
566 static void bond_update_speed_duplex(struct slave *slave)
568 struct net_device *slave_dev = slave->dev;
569 struct ethtool_cmd ecmd;
573 slave->speed = SPEED_UNKNOWN;
574 slave->duplex = DUPLEX_UNKNOWN;
576 res = __ethtool_get_settings(slave_dev, &ecmd);
580 slave_speed = ethtool_cmd_speed(&ecmd);
581 if (slave_speed == 0 || slave_speed == ((__u32) -1))
584 switch (ecmd.duplex) {
592 slave->speed = slave_speed;
593 slave->duplex = ecmd.duplex;
599 * if <dev> supports MII link status reporting, check its link status.
601 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
602 * depending upon the setting of the use_carrier parameter.
604 * Return either BMSR_LSTATUS, meaning that the link is up (or we
605 * can't tell and just pretend it is), or 0, meaning that the link is
608 * If reporting is non-zero, instead of faking link up, return -1 if
609 * both ETHTOOL and MII ioctls fail (meaning the device does not
610 * support them). If use_carrier is set, return whatever it says.
611 * It'd be nice if there was a good way to tell if a driver supports
612 * netif_carrier, but there really isn't.
614 static int bond_check_dev_link(struct bonding *bond,
615 struct net_device *slave_dev, int reporting)
617 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
618 int (*ioctl)(struct net_device *, struct ifreq *, int);
620 struct mii_ioctl_data *mii;
622 if (!reporting && !netif_running(slave_dev))
625 if (bond->params.use_carrier)
626 return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
628 /* Try to get link status using Ethtool first. */
629 if (slave_dev->ethtool_ops->get_link)
630 return slave_dev->ethtool_ops->get_link(slave_dev) ?
633 /* Ethtool can't be used, fallback to MII ioctls. */
634 ioctl = slave_ops->ndo_do_ioctl;
636 /* TODO: set pointer to correct ioctl on a per team member */
637 /* bases to make this more efficient. that is, once */
638 /* we determine the correct ioctl, we will always */
639 /* call it and not the others for that team */
643 * We cannot assume that SIOCGMIIPHY will also read a
644 * register; not all network drivers (e.g., e100)
648 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
649 strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
651 if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
652 mii->reg_num = MII_BMSR;
653 if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
654 return mii->val_out & BMSR_LSTATUS;
659 * If reporting, report that either there's no dev->do_ioctl,
660 * or both SIOCGMIIREG and get_link failed (meaning that we
661 * cannot report link status). If not reporting, pretend
664 return reporting ? -1 : BMSR_LSTATUS;
667 /*----------------------------- Multicast list ------------------------------*/
670 * Push the promiscuity flag down to appropriate slaves
672 static int bond_set_promiscuity(struct bonding *bond, int inc)
675 if (USES_PRIMARY(bond->params.mode)) {
676 /* write lock already acquired */
677 if (bond->curr_active_slave) {
678 err = dev_set_promiscuity(bond->curr_active_slave->dev,
684 bond_for_each_slave(bond, slave) {
685 err = dev_set_promiscuity(slave->dev, inc);
694 * Push the allmulti flag down to all slaves
696 static int bond_set_allmulti(struct bonding *bond, int inc)
699 if (USES_PRIMARY(bond->params.mode)) {
700 /* write lock already acquired */
701 if (bond->curr_active_slave) {
702 err = dev_set_allmulti(bond->curr_active_slave->dev,
708 bond_for_each_slave(bond, slave) {
709 err = dev_set_allmulti(slave->dev, inc);
718 * Retrieve the list of registered multicast addresses for the bonding
719 * device and retransmit an IGMP JOIN request to the current active
722 static void bond_resend_igmp_join_requests(struct bonding *bond)
724 if (!rtnl_trylock()) {
725 queue_delayed_work(bond->wq, &bond->mcast_work, 1);
728 call_netdevice_notifiers(NETDEV_RESEND_IGMP, bond->dev);
731 /* We use curr_slave_lock to protect against concurrent access to
732 * igmp_retrans from multiple running instances of this function and
733 * bond_change_active_slave
735 write_lock_bh(&bond->curr_slave_lock);
736 if (bond->igmp_retrans > 1) {
737 bond->igmp_retrans--;
738 queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
740 write_unlock_bh(&bond->curr_slave_lock);
743 static void bond_resend_igmp_join_requests_delayed(struct work_struct *work)
745 struct bonding *bond = container_of(work, struct bonding,
748 bond_resend_igmp_join_requests(bond);
751 /* Flush bond's hardware addresses from slave
753 static void bond_hw_addr_flush(struct net_device *bond_dev,
754 struct net_device *slave_dev)
756 struct bonding *bond = netdev_priv(bond_dev);
758 dev_uc_unsync(slave_dev, bond_dev);
759 dev_mc_unsync(slave_dev, bond_dev);
761 if (bond->params.mode == BOND_MODE_8023AD) {
762 /* del lacpdu mc addr from mc list */
763 u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
765 dev_mc_del(slave_dev, lacpdu_multicast);
769 /*--------------------------- Active slave change ---------------------------*/
771 /* Update the hardware address list and promisc/allmulti for the new and
772 * old active slaves (if any). Modes that are !USES_PRIMARY keep all
773 * slaves up date at all times; only the USES_PRIMARY modes need to call
774 * this function to swap these settings during a failover.
776 static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active,
777 struct slave *old_active)
780 if (bond->dev->flags & IFF_PROMISC)
781 dev_set_promiscuity(old_active->dev, -1);
783 if (bond->dev->flags & IFF_ALLMULTI)
784 dev_set_allmulti(old_active->dev, -1);
786 bond_hw_addr_flush(bond->dev, old_active->dev);
790 /* FIXME: Signal errors upstream. */
791 if (bond->dev->flags & IFF_PROMISC)
792 dev_set_promiscuity(new_active->dev, 1);
794 if (bond->dev->flags & IFF_ALLMULTI)
795 dev_set_allmulti(new_active->dev, 1);
797 netif_addr_lock_bh(bond->dev);
798 dev_uc_sync(new_active->dev, bond->dev);
799 dev_mc_sync(new_active->dev, bond->dev);
800 netif_addr_unlock_bh(bond->dev);
805 * bond_set_dev_addr - clone slave's address to bond
806 * @bond_dev: bond net device
807 * @slave_dev: slave net device
809 * Should be called with RTNL held.
811 static void bond_set_dev_addr(struct net_device *bond_dev,
812 struct net_device *slave_dev)
814 pr_debug("bond_dev=%p slave_dev=%p slave_dev->addr_len=%d\n",
815 bond_dev, slave_dev, slave_dev->addr_len);
816 memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
817 bond_dev->addr_assign_type = NET_ADDR_STOLEN;
818 call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev);
822 * bond_do_fail_over_mac
824 * Perform special MAC address swapping for fail_over_mac settings
826 * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
828 static void bond_do_fail_over_mac(struct bonding *bond,
829 struct slave *new_active,
830 struct slave *old_active)
831 __releases(&bond->curr_slave_lock)
832 __releases(&bond->lock)
833 __acquires(&bond->lock)
834 __acquires(&bond->curr_slave_lock)
836 u8 tmp_mac[ETH_ALEN];
837 struct sockaddr saddr;
840 switch (bond->params.fail_over_mac) {
841 case BOND_FOM_ACTIVE:
843 write_unlock_bh(&bond->curr_slave_lock);
844 read_unlock(&bond->lock);
845 bond_set_dev_addr(bond->dev, new_active->dev);
846 read_lock(&bond->lock);
847 write_lock_bh(&bond->curr_slave_lock);
850 case BOND_FOM_FOLLOW:
852 * if new_active && old_active, swap them
853 * if just old_active, do nothing (going to no active slave)
854 * if just new_active, set new_active to bond's MAC
859 write_unlock_bh(&bond->curr_slave_lock);
860 read_unlock(&bond->lock);
863 memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
864 memcpy(saddr.sa_data, old_active->dev->dev_addr,
866 saddr.sa_family = new_active->dev->type;
868 memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
869 saddr.sa_family = bond->dev->type;
872 rv = dev_set_mac_address(new_active->dev, &saddr);
874 pr_err("%s: Error %d setting MAC of slave %s\n",
875 bond->dev->name, -rv, new_active->dev->name);
882 memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
883 saddr.sa_family = old_active->dev->type;
885 rv = dev_set_mac_address(old_active->dev, &saddr);
887 pr_err("%s: Error %d setting MAC of slave %s\n",
888 bond->dev->name, -rv, new_active->dev->name);
890 read_lock(&bond->lock);
891 write_lock_bh(&bond->curr_slave_lock);
894 pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n",
895 bond->dev->name, bond->params.fail_over_mac);
901 static bool bond_should_change_active(struct bonding *bond)
903 struct slave *prim = bond->primary_slave;
904 struct slave *curr = bond->curr_active_slave;
906 if (!prim || !curr || curr->link != BOND_LINK_UP)
908 if (bond->force_primary) {
909 bond->force_primary = false;
912 if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
913 (prim->speed < curr->speed ||
914 (prim->speed == curr->speed && prim->duplex <= curr->duplex)))
916 if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
922 * find_best_interface - select the best available slave to be the active one
923 * @bond: our bonding struct
925 * Warning: Caller must hold curr_slave_lock for writing.
927 static struct slave *bond_find_best_slave(struct bonding *bond)
929 struct slave *new_active, *old_active;
930 struct slave *bestslave = NULL;
931 int mintime = bond->params.updelay;
934 new_active = bond->curr_active_slave;
936 if (!new_active) { /* there were no active slaves left */
937 new_active = bond_first_slave(bond);
939 return NULL; /* still no slave, return NULL */
942 if ((bond->primary_slave) &&
943 bond->primary_slave->link == BOND_LINK_UP &&
944 bond_should_change_active(bond)) {
945 new_active = bond->primary_slave;
948 /* remember where to stop iterating over the slaves */
949 old_active = new_active;
951 bond_for_each_slave_from(bond, new_active, i, old_active) {
952 if (new_active->link == BOND_LINK_UP) {
954 } else if (new_active->link == BOND_LINK_BACK &&
955 IS_UP(new_active->dev)) {
956 /* link up, but waiting for stabilization */
957 if (new_active->delay < mintime) {
958 mintime = new_active->delay;
959 bestslave = new_active;
967 static bool bond_should_notify_peers(struct bonding *bond)
969 struct slave *slave = bond->curr_active_slave;
971 pr_debug("bond_should_notify_peers: bond %s slave %s\n",
972 bond->dev->name, slave ? slave->dev->name : "NULL");
974 if (!slave || !bond->send_peer_notif ||
975 test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
978 bond->send_peer_notif--;
983 * change_active_interface - change the active slave into the specified one
984 * @bond: our bonding struct
985 * @new: the new slave to make the active one
987 * Set the new slave to the bond's settings and unset them on the old
989 * Setting include flags, mc-list, promiscuity, allmulti, etc.
991 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
992 * because it is apparently the best available slave we have, even though its
993 * updelay hasn't timed out yet.
995 * If new_active is not NULL, caller must hold bond->lock for read and
996 * curr_slave_lock for write_bh.
998 void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
1000 struct slave *old_active = bond->curr_active_slave;
1002 if (old_active == new_active)
1006 new_active->jiffies = jiffies;
1008 if (new_active->link == BOND_LINK_BACK) {
1009 if (USES_PRIMARY(bond->params.mode)) {
1010 pr_info("%s: making interface %s the new active one %d ms earlier.\n",
1011 bond->dev->name, new_active->dev->name,
1012 (bond->params.updelay - new_active->delay) * bond->params.miimon);
1015 new_active->delay = 0;
1016 new_active->link = BOND_LINK_UP;
1018 if (bond->params.mode == BOND_MODE_8023AD)
1019 bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
1021 if (bond_is_lb(bond))
1022 bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
1024 if (USES_PRIMARY(bond->params.mode)) {
1025 pr_info("%s: making interface %s the new active one.\n",
1026 bond->dev->name, new_active->dev->name);
1031 if (USES_PRIMARY(bond->params.mode))
1032 bond_hw_addr_swap(bond, new_active, old_active);
1034 if (bond_is_lb(bond)) {
1035 bond_alb_handle_active_change(bond, new_active);
1037 bond_set_slave_inactive_flags(old_active);
1039 bond_set_slave_active_flags(new_active);
1041 rcu_assign_pointer(bond->curr_active_slave, new_active);
1044 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
1046 bond_set_slave_inactive_flags(old_active);
1049 bool should_notify_peers = false;
1051 bond_set_slave_active_flags(new_active);
1053 if (bond->params.fail_over_mac)
1054 bond_do_fail_over_mac(bond, new_active,
1057 if (netif_running(bond->dev)) {
1058 bond->send_peer_notif =
1059 bond->params.num_peer_notif;
1060 should_notify_peers =
1061 bond_should_notify_peers(bond);
1064 write_unlock_bh(&bond->curr_slave_lock);
1065 read_unlock(&bond->lock);
1067 call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev);
1068 if (should_notify_peers)
1069 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
1072 read_lock(&bond->lock);
1073 write_lock_bh(&bond->curr_slave_lock);
1077 /* resend IGMP joins since active slave has changed or
1078 * all were sent on curr_active_slave.
1079 * resend only if bond is brought up with the affected
1080 * bonding modes and the retransmission is enabled */
1081 if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
1082 ((USES_PRIMARY(bond->params.mode) && new_active) ||
1083 bond->params.mode == BOND_MODE_ROUNDROBIN)) {
1084 bond->igmp_retrans = bond->params.resend_igmp;
1085 queue_delayed_work(bond->wq, &bond->mcast_work, 1);
1090 * bond_select_active_slave - select a new active slave, if needed
1091 * @bond: our bonding struct
1093 * This functions should be called when one of the following occurs:
1094 * - The old curr_active_slave has been released or lost its link.
1095 * - The primary_slave has got its link back.
1096 * - A slave has got its link back and there's no old curr_active_slave.
1098 * Caller must hold bond->lock for read and curr_slave_lock for write_bh.
1100 void bond_select_active_slave(struct bonding *bond)
1102 struct slave *best_slave;
1105 best_slave = bond_find_best_slave(bond);
1106 if (best_slave != bond->curr_active_slave) {
1107 bond_change_active_slave(bond, best_slave);
1108 rv = bond_set_carrier(bond);
1112 if (netif_carrier_ok(bond->dev)) {
1113 pr_info("%s: first active interface up!\n",
1116 pr_info("%s: now running without any active interface !\n",
1122 /*--------------------------- slave list handling ---------------------------*/
1125 * This function attaches the slave to the end of list.
1127 * bond->lock held for writing by caller.
1129 static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
1131 list_add_tail_rcu(&new_slave->list, &bond->slave_list);
1136 * This function detaches the slave from the list.
1137 * WARNING: no check is made to verify if the slave effectively
1138 * belongs to <bond>.
1139 * Nothing is freed on return, structures are just unchained.
1140 * If any slave pointer in bond was pointing to <slave>,
1141 * it should be changed by the calling function.
1143 * bond->lock held for writing by caller.
1145 static void bond_detach_slave(struct bonding *bond, struct slave *slave)
1147 list_del_rcu(&slave->list);
1151 #ifdef CONFIG_NET_POLL_CONTROLLER
1152 static inline int slave_enable_netpoll(struct slave *slave)
1157 np = kzalloc(sizeof(*np), GFP_ATOMIC);
1162 err = __netpoll_setup(np, slave->dev, GFP_ATOMIC);
1171 static inline void slave_disable_netpoll(struct slave *slave)
1173 struct netpoll *np = slave->np;
1179 __netpoll_free_async(np);
1181 static inline bool slave_dev_support_netpoll(struct net_device *slave_dev)
1183 if (slave_dev->priv_flags & IFF_DISABLE_NETPOLL)
1185 if (!slave_dev->netdev_ops->ndo_poll_controller)
1190 static void bond_poll_controller(struct net_device *bond_dev)
1194 static void bond_netpoll_cleanup(struct net_device *bond_dev)
1196 struct bonding *bond = netdev_priv(bond_dev);
1197 struct slave *slave;
1199 bond_for_each_slave(bond, slave)
1200 if (IS_UP(slave->dev))
1201 slave_disable_netpoll(slave);
1204 static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp)
1206 struct bonding *bond = netdev_priv(dev);
1207 struct slave *slave;
1210 bond_for_each_slave(bond, slave) {
1211 err = slave_enable_netpoll(slave);
1213 bond_netpoll_cleanup(dev);
1220 static inline int slave_enable_netpoll(struct slave *slave)
1224 static inline void slave_disable_netpoll(struct slave *slave)
1227 static void bond_netpoll_cleanup(struct net_device *bond_dev)
1232 /*---------------------------------- IOCTL ----------------------------------*/
1234 static netdev_features_t bond_fix_features(struct net_device *dev,
1235 netdev_features_t features)
1237 struct slave *slave;
1238 struct bonding *bond = netdev_priv(dev);
1239 netdev_features_t mask;
1241 read_lock(&bond->lock);
1243 if (list_empty(&bond->slave_list)) {
1244 /* Disable adding VLANs to empty bond. But why? --mq */
1245 features |= NETIF_F_VLAN_CHALLENGED;
1250 features &= ~NETIF_F_ONE_FOR_ALL;
1251 features |= NETIF_F_ALL_FOR_ALL;
1253 bond_for_each_slave(bond, slave) {
1254 features = netdev_increment_features(features,
1255 slave->dev->features,
1258 features = netdev_add_tso_features(features, mask);
1261 read_unlock(&bond->lock);
1265 #define BOND_VLAN_FEATURES (NETIF_F_ALL_CSUM | NETIF_F_SG | \
1266 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
1267 NETIF_F_HIGHDMA | NETIF_F_LRO)
1269 static void bond_compute_features(struct bonding *bond)
1271 struct slave *slave;
1272 struct net_device *bond_dev = bond->dev;
1273 netdev_features_t vlan_features = BOND_VLAN_FEATURES;
1274 unsigned short max_hard_header_len = ETH_HLEN;
1275 unsigned int gso_max_size = GSO_MAX_SIZE;
1276 u16 gso_max_segs = GSO_MAX_SEGS;
1277 unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE;
1279 read_lock(&bond->lock);
1281 if (list_empty(&bond->slave_list))
1284 bond_for_each_slave(bond, slave) {
1285 vlan_features = netdev_increment_features(vlan_features,
1286 slave->dev->vlan_features, BOND_VLAN_FEATURES);
1288 dst_release_flag &= slave->dev->priv_flags;
1289 if (slave->dev->hard_header_len > max_hard_header_len)
1290 max_hard_header_len = slave->dev->hard_header_len;
1292 gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
1293 gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
1297 bond_dev->vlan_features = vlan_features;
1298 bond_dev->hard_header_len = max_hard_header_len;
1299 bond_dev->gso_max_segs = gso_max_segs;
1300 netif_set_gso_max_size(bond_dev, gso_max_size);
1302 flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE;
1303 bond_dev->priv_flags = flags | dst_release_flag;
1305 read_unlock(&bond->lock);
1307 netdev_change_features(bond_dev);
1310 static void bond_setup_by_slave(struct net_device *bond_dev,
1311 struct net_device *slave_dev)
1313 bond_dev->header_ops = slave_dev->header_ops;
1315 bond_dev->type = slave_dev->type;
1316 bond_dev->hard_header_len = slave_dev->hard_header_len;
1317 bond_dev->addr_len = slave_dev->addr_len;
1319 memcpy(bond_dev->broadcast, slave_dev->broadcast,
1320 slave_dev->addr_len);
1323 /* On bonding slaves other than the currently active slave, suppress
1324 * duplicates except for alb non-mcast/bcast.
1326 static bool bond_should_deliver_exact_match(struct sk_buff *skb,
1327 struct slave *slave,
1328 struct bonding *bond)
1330 if (bond_is_slave_inactive(slave)) {
1331 if (bond->params.mode == BOND_MODE_ALB &&
1332 skb->pkt_type != PACKET_BROADCAST &&
1333 skb->pkt_type != PACKET_MULTICAST)
1340 static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
1342 struct sk_buff *skb = *pskb;
1343 struct slave *slave;
1344 struct bonding *bond;
1345 int (*recv_probe)(const struct sk_buff *, struct bonding *,
1347 int ret = RX_HANDLER_ANOTHER;
1349 skb = skb_share_check(skb, GFP_ATOMIC);
1351 return RX_HANDLER_CONSUMED;
1355 slave = bond_slave_get_rcu(skb->dev);
1358 if (bond->params.arp_interval)
1359 slave->dev->last_rx = jiffies;
1361 recv_probe = ACCESS_ONCE(bond->recv_probe);
1363 ret = recv_probe(skb, bond, slave);
1364 if (ret == RX_HANDLER_CONSUMED) {
1370 if (bond_should_deliver_exact_match(skb, slave, bond)) {
1371 return RX_HANDLER_EXACT;
1374 skb->dev = bond->dev;
1376 if (bond->params.mode == BOND_MODE_ALB &&
1377 bond->dev->priv_flags & IFF_BRIDGE_PORT &&
1378 skb->pkt_type == PACKET_HOST) {
1380 if (unlikely(skb_cow_head(skb,
1381 skb->data - skb_mac_header(skb)))) {
1383 return RX_HANDLER_CONSUMED;
1385 memcpy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, ETH_ALEN);
1391 static int bond_master_upper_dev_link(struct net_device *bond_dev,
1392 struct net_device *slave_dev)
1396 err = netdev_master_upper_dev_link(slave_dev, bond_dev);
1399 slave_dev->flags |= IFF_SLAVE;
1400 rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE);
1404 static void bond_upper_dev_unlink(struct net_device *bond_dev,
1405 struct net_device *slave_dev)
1407 netdev_upper_dev_unlink(slave_dev, bond_dev);
1408 slave_dev->flags &= ~IFF_SLAVE;
1409 rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE);
1412 /* enslave device <slave> to bond device <master> */
1413 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
1415 struct bonding *bond = netdev_priv(bond_dev);
1416 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
1417 struct slave *new_slave = NULL;
1418 struct sockaddr addr;
1422 if (!bond->params.use_carrier &&
1423 slave_dev->ethtool_ops->get_link == NULL &&
1424 slave_ops->ndo_do_ioctl == NULL) {
1425 pr_warning("%s: Warning: no link monitoring support for %s\n",
1426 bond_dev->name, slave_dev->name);
1429 /* already enslaved */
1430 if (slave_dev->flags & IFF_SLAVE) {
1431 pr_debug("Error, Device was already enslaved\n");
1435 /* vlan challenged mutual exclusion */
1436 /* no need to lock since we're protected by rtnl_lock */
1437 if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
1438 pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
1439 if (vlan_uses_dev(bond_dev)) {
1440 pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
1441 bond_dev->name, slave_dev->name, bond_dev->name);
1444 pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
1445 bond_dev->name, slave_dev->name,
1446 slave_dev->name, bond_dev->name);
1449 pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
1453 * Old ifenslave binaries are no longer supported. These can
1454 * be identified with moderate accuracy by the state of the slave:
1455 * the current ifenslave will set the interface down prior to
1456 * enslaving it; the old ifenslave will not.
1458 if ((slave_dev->flags & IFF_UP)) {
1459 pr_err("%s is up. This may be due to an out of date ifenslave.\n",
1462 goto err_undo_flags;
1465 /* set bonding device ether type by slave - bonding netdevices are
1466 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1467 * there is a need to override some of the type dependent attribs/funcs.
1469 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1470 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1472 if (list_empty(&bond->slave_list)) {
1473 if (bond_dev->type != slave_dev->type) {
1474 pr_debug("%s: change device type from %d to %d\n",
1476 bond_dev->type, slave_dev->type);
1478 res = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE,
1480 res = notifier_to_errno(res);
1482 pr_err("%s: refused to change device type\n",
1485 goto err_undo_flags;
1488 /* Flush unicast and multicast addresses */
1489 dev_uc_flush(bond_dev);
1490 dev_mc_flush(bond_dev);
1492 if (slave_dev->type != ARPHRD_ETHER)
1493 bond_setup_by_slave(bond_dev, slave_dev);
1495 ether_setup(bond_dev);
1496 bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
1499 call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
1502 } else if (bond_dev->type != slave_dev->type) {
1503 pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
1505 slave_dev->type, bond_dev->type);
1507 goto err_undo_flags;
1510 if (slave_ops->ndo_set_mac_address == NULL) {
1511 if (list_empty(&bond->slave_list)) {
1512 pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
1514 bond->params.fail_over_mac = BOND_FOM_ACTIVE;
1515 } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
1516 pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
1519 goto err_undo_flags;
1523 call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
1525 /* If this is the first slave, then we need to set the master's hardware
1526 * address to be the same as the slave's. */
1527 if (list_empty(&bond->slave_list) &&
1528 bond->dev->addr_assign_type == NET_ADDR_RANDOM)
1529 bond_set_dev_addr(bond->dev, slave_dev);
1531 new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
1534 goto err_undo_flags;
1536 INIT_LIST_HEAD(&new_slave->list);
1538 * Set the new_slave's queue_id to be zero. Queue ID mapping
1539 * is set via sysfs or module option if desired.
1541 new_slave->queue_id = 0;
1543 /* Save slave's original mtu and then set it to match the bond */
1544 new_slave->original_mtu = slave_dev->mtu;
1545 res = dev_set_mtu(slave_dev, bond->dev->mtu);
1547 pr_debug("Error %d calling dev_set_mtu\n", res);
1552 * Save slave's original ("permanent") mac address for modes
1553 * that need it, and for restoring it upon release, and then
1554 * set it to the master's address
1556 memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
1558 if (!bond->params.fail_over_mac) {
1560 * Set slave to master's mac address. The application already
1561 * set the master's mac address to that of the first slave
1563 memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
1564 addr.sa_family = slave_dev->type;
1565 res = dev_set_mac_address(slave_dev, &addr);
1567 pr_debug("Error %d calling set_mac_address\n", res);
1568 goto err_restore_mtu;
1572 res = bond_master_upper_dev_link(bond_dev, slave_dev);
1574 pr_debug("Error %d calling bond_master_upper_dev_link\n", res);
1575 goto err_restore_mac;
1578 /* open the slave since the application closed it */
1579 res = dev_open(slave_dev);
1581 pr_debug("Opening slave %s failed\n", slave_dev->name);
1582 goto err_unset_master;
1585 new_slave->bond = bond;
1586 new_slave->dev = slave_dev;
1587 slave_dev->priv_flags |= IFF_BONDING;
1589 if (bond_is_lb(bond)) {
1590 /* bond_alb_init_slave() must be called before all other stages since
1591 * it might fail and we do not want to have to undo everything
1593 res = bond_alb_init_slave(bond, new_slave);
1598 /* If the mode USES_PRIMARY, then the following is handled by
1599 * bond_change_active_slave().
1601 if (!USES_PRIMARY(bond->params.mode)) {
1602 /* set promiscuity level to new slave */
1603 if (bond_dev->flags & IFF_PROMISC) {
1604 res = dev_set_promiscuity(slave_dev, 1);
1609 /* set allmulti level to new slave */
1610 if (bond_dev->flags & IFF_ALLMULTI) {
1611 res = dev_set_allmulti(slave_dev, 1);
1616 netif_addr_lock_bh(bond_dev);
1618 dev_mc_sync_multiple(slave_dev, bond_dev);
1619 dev_uc_sync_multiple(slave_dev, bond_dev);
1621 netif_addr_unlock_bh(bond_dev);
1624 if (bond->params.mode == BOND_MODE_8023AD) {
1625 /* add lacpdu mc addr to mc list */
1626 u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
1628 dev_mc_add(slave_dev, lacpdu_multicast);
1631 bond_add_vlans_on_slave(bond, slave_dev);
1633 write_lock_bh(&bond->lock);
1635 bond_attach_slave(bond, new_slave);
1637 new_slave->delay = 0;
1638 new_slave->link_failure_count = 0;
1640 write_unlock_bh(&bond->lock);
1642 bond_compute_features(bond);
1644 bond_update_speed_duplex(new_slave);
1646 read_lock(&bond->lock);
1648 new_slave->last_arp_rx = jiffies -
1649 (msecs_to_jiffies(bond->params.arp_interval) + 1);
1650 for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
1651 new_slave->target_last_arp_rx[i] = new_slave->last_arp_rx;
1653 if (bond->params.miimon && !bond->params.use_carrier) {
1654 link_reporting = bond_check_dev_link(bond, slave_dev, 1);
1656 if ((link_reporting == -1) && !bond->params.arp_interval) {
1658 * miimon is set but a bonded network driver
1659 * does not support ETHTOOL/MII and
1660 * arp_interval is not set. Note: if
1661 * use_carrier is enabled, we will never go
1662 * here (because netif_carrier is always
1663 * supported); thus, we don't need to change
1664 * the messages for netif_carrier.
1666 pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
1667 bond_dev->name, slave_dev->name);
1668 } else if (link_reporting == -1) {
1669 /* unable get link status using mii/ethtool */
1670 pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
1671 bond_dev->name, slave_dev->name);
1675 /* check for initial state */
1676 if (bond->params.miimon) {
1677 if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) {
1678 if (bond->params.updelay) {
1679 new_slave->link = BOND_LINK_BACK;
1680 new_slave->delay = bond->params.updelay;
1682 new_slave->link = BOND_LINK_UP;
1685 new_slave->link = BOND_LINK_DOWN;
1687 } else if (bond->params.arp_interval) {
1688 new_slave->link = (netif_carrier_ok(slave_dev) ?
1689 BOND_LINK_UP : BOND_LINK_DOWN);
1691 new_slave->link = BOND_LINK_UP;
1694 if (new_slave->link != BOND_LINK_DOWN)
1695 new_slave->jiffies = jiffies;
1696 pr_debug("Initial state of slave_dev is BOND_LINK_%s\n",
1697 new_slave->link == BOND_LINK_DOWN ? "DOWN" :
1698 (new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
1700 if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
1701 /* if there is a primary slave, remember it */
1702 if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
1703 bond->primary_slave = new_slave;
1704 bond->force_primary = true;
1708 write_lock_bh(&bond->curr_slave_lock);
1710 switch (bond->params.mode) {
1711 case BOND_MODE_ACTIVEBACKUP:
1712 bond_set_slave_inactive_flags(new_slave);
1713 bond_select_active_slave(bond);
1715 case BOND_MODE_8023AD:
1716 /* in 802.3ad mode, the internal mechanism
1717 * will activate the slaves in the selected
1720 bond_set_slave_inactive_flags(new_slave);
1721 /* if this is the first slave */
1722 if (bond_first_slave(bond) == new_slave) {
1723 SLAVE_AD_INFO(new_slave).id = 1;
1724 /* Initialize AD with the number of times that the AD timer is called in 1 second
1725 * can be called only after the mac address of the bond is set
1727 bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
1729 struct slave *prev_slave;
1731 prev_slave = bond_prev_slave(bond, new_slave);
1732 SLAVE_AD_INFO(new_slave).id =
1733 SLAVE_AD_INFO(prev_slave).id + 1;
1736 bond_3ad_bind_slave(new_slave);
1740 bond_set_active_slave(new_slave);
1741 bond_set_slave_inactive_flags(new_slave);
1742 bond_select_active_slave(bond);
1745 pr_debug("This slave is always active in trunk mode\n");
1747 /* always active in trunk mode */
1748 bond_set_active_slave(new_slave);
1750 /* In trunking mode there is little meaning to curr_active_slave
1751 * anyway (it holds no special properties of the bond device),
1752 * so we can change it without calling change_active_interface()
1754 if (!bond->curr_active_slave && new_slave->link == BOND_LINK_UP)
1755 rcu_assign_pointer(bond->curr_active_slave, new_slave);
1758 } /* switch(bond_mode) */
1760 write_unlock_bh(&bond->curr_slave_lock);
1762 bond_set_carrier(bond);
1764 #ifdef CONFIG_NET_POLL_CONTROLLER
1765 slave_dev->npinfo = bond->dev->npinfo;
1766 if (slave_dev->npinfo) {
1767 if (slave_enable_netpoll(new_slave)) {
1768 read_unlock(&bond->lock);
1769 pr_info("Error, %s: master_dev is using netpoll, "
1770 "but new slave device does not support netpoll.\n",
1778 read_unlock(&bond->lock);
1780 res = bond_create_slave_symlinks(bond_dev, slave_dev);
1784 res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
1787 pr_debug("Error %d calling netdev_rx_handler_register\n", res);
1788 goto err_dest_symlinks;
1791 pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
1792 bond_dev->name, slave_dev->name,
1793 bond_is_active_slave(new_slave) ? "n active" : " backup",
1794 new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
1796 /* enslave is successful */
1799 /* Undo stages on error */
1801 bond_destroy_slave_symlinks(bond_dev, slave_dev);
1804 if (!USES_PRIMARY(bond->params.mode))
1805 bond_hw_addr_flush(bond_dev, slave_dev);
1807 bond_del_vlans_from_slave(bond, slave_dev);
1808 write_lock_bh(&bond->lock);
1809 bond_detach_slave(bond, new_slave);
1810 if (bond->primary_slave == new_slave)
1811 bond->primary_slave = NULL;
1812 if (bond->curr_active_slave == new_slave) {
1813 bond_change_active_slave(bond, NULL);
1814 write_unlock_bh(&bond->lock);
1815 read_lock(&bond->lock);
1816 write_lock_bh(&bond->curr_slave_lock);
1817 bond_select_active_slave(bond);
1818 write_unlock_bh(&bond->curr_slave_lock);
1819 read_unlock(&bond->lock);
1821 write_unlock_bh(&bond->lock);
1823 slave_disable_netpoll(new_slave);
1826 slave_dev->priv_flags &= ~IFF_BONDING;
1827 dev_close(slave_dev);
1830 bond_upper_dev_unlink(bond_dev, slave_dev);
1833 if (!bond->params.fail_over_mac) {
1834 /* XXX TODO - fom follow mode needs to change master's
1835 * MAC if this slave's MAC is in use by the bond, or at
1836 * least print a warning.
1838 memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
1839 addr.sa_family = slave_dev->type;
1840 dev_set_mac_address(slave_dev, &addr);
1844 dev_set_mtu(slave_dev, new_slave->original_mtu);
1850 bond_compute_features(bond);
1851 /* Enslave of first slave has failed and we need to fix master's mac */
1852 if (list_empty(&bond->slave_list) &&
1853 ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr))
1854 eth_hw_addr_random(bond_dev);
1860 * Try to release the slave device <slave> from the bond device <master>
1861 * It is legal to access curr_active_slave without a lock because all the function
1862 * is write-locked. If "all" is true it means that the function is being called
1863 * while destroying a bond interface and all slaves are being released.
1865 * The rules for slave state should be:
1866 * for Active/Backup:
1867 * Active stays on all backups go down
1868 * for Bonded connections:
1869 * The first up interface should be left on and all others downed.
1871 static int __bond_release_one(struct net_device *bond_dev,
1872 struct net_device *slave_dev,
1875 struct bonding *bond = netdev_priv(bond_dev);
1876 struct slave *slave, *oldcurrent;
1877 struct sockaddr addr;
1878 netdev_features_t old_features = bond_dev->features;
1880 /* slave is not a slave or master is not master of this slave */
1881 if (!(slave_dev->flags & IFF_SLAVE) ||
1882 !netdev_has_upper_dev(slave_dev, bond_dev)) {
1883 pr_err("%s: Error: cannot release %s.\n",
1884 bond_dev->name, slave_dev->name);
1889 write_lock_bh(&bond->lock);
1891 slave = bond_get_slave_by_dev(bond, slave_dev);
1893 /* not a slave of this bond */
1894 pr_info("%s: %s not enslaved\n",
1895 bond_dev->name, slave_dev->name);
1896 write_unlock_bh(&bond->lock);
1897 unblock_netpoll_tx();
1901 write_unlock_bh(&bond->lock);
1902 /* unregister rx_handler early so bond_handle_frame wouldn't be called
1903 * for this slave anymore.
1905 netdev_rx_handler_unregister(slave_dev);
1906 write_lock_bh(&bond->lock);
1908 /* Inform AD package of unbinding of slave. */
1909 if (bond->params.mode == BOND_MODE_8023AD) {
1910 /* must be called before the slave is
1911 * detached from the list
1913 bond_3ad_unbind_slave(slave);
1916 pr_info("%s: releasing %s interface %s\n",
1918 bond_is_active_slave(slave) ? "active" : "backup",
1921 oldcurrent = bond->curr_active_slave;
1923 bond->current_arp_slave = NULL;
1925 /* release the slave from its bond */
1926 bond_detach_slave(bond, slave);
1928 if (!all && !bond->params.fail_over_mac) {
1929 if (ether_addr_equal(bond_dev->dev_addr, slave->perm_hwaddr) &&
1930 !list_empty(&bond->slave_list))
1931 pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
1932 bond_dev->name, slave_dev->name,
1934 bond_dev->name, slave_dev->name);
1937 if (bond->primary_slave == slave)
1938 bond->primary_slave = NULL;
1940 if (oldcurrent == slave)
1941 bond_change_active_slave(bond, NULL);
1943 if (bond_is_lb(bond)) {
1944 /* Must be called only after the slave has been
1945 * detached from the list and the curr_active_slave
1946 * has been cleared (if our_slave == old_current),
1947 * but before a new active slave is selected.
1949 write_unlock_bh(&bond->lock);
1950 bond_alb_deinit_slave(bond, slave);
1951 write_lock_bh(&bond->lock);
1955 rcu_assign_pointer(bond->curr_active_slave, NULL);
1956 } else if (oldcurrent == slave) {
1958 * Note that we hold RTNL over this sequence, so there
1959 * is no concern that another slave add/remove event
1962 write_unlock_bh(&bond->lock);
1963 read_lock(&bond->lock);
1964 write_lock_bh(&bond->curr_slave_lock);
1966 bond_select_active_slave(bond);
1968 write_unlock_bh(&bond->curr_slave_lock);
1969 read_unlock(&bond->lock);
1970 write_lock_bh(&bond->lock);
1973 if (list_empty(&bond->slave_list)) {
1974 bond_set_carrier(bond);
1975 eth_hw_addr_random(bond_dev);
1977 if (bond_vlan_used(bond)) {
1978 pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
1979 bond_dev->name, bond_dev->name);
1980 pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
1985 write_unlock_bh(&bond->lock);
1986 unblock_netpoll_tx();
1989 if (list_empty(&bond->slave_list)) {
1990 call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
1991 call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
1994 bond_compute_features(bond);
1995 if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
1996 (old_features & NETIF_F_VLAN_CHALLENGED))
1997 pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
1998 bond_dev->name, slave_dev->name, bond_dev->name);
2000 /* must do this from outside any spinlocks */
2001 bond_destroy_slave_symlinks(bond_dev, slave_dev);
2003 bond_del_vlans_from_slave(bond, slave_dev);
2005 /* If the mode USES_PRIMARY, then this cases was handled above by
2006 * bond_change_active_slave(..., NULL)
2008 if (!USES_PRIMARY(bond->params.mode)) {
2009 /* unset promiscuity level from slave */
2010 if (bond_dev->flags & IFF_PROMISC)
2011 dev_set_promiscuity(slave_dev, -1);
2013 /* unset allmulti level from slave */
2014 if (bond_dev->flags & IFF_ALLMULTI)
2015 dev_set_allmulti(slave_dev, -1);
2017 bond_hw_addr_flush(bond_dev, slave_dev);
2020 bond_upper_dev_unlink(bond_dev, slave_dev);
2022 slave_disable_netpoll(slave);
2024 /* close slave before restoring its mac address */
2025 dev_close(slave_dev);
2027 if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
2028 /* restore original ("permanent") mac address */
2029 memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
2030 addr.sa_family = slave_dev->type;
2031 dev_set_mac_address(slave_dev, &addr);
2034 dev_set_mtu(slave_dev, slave->original_mtu);
2036 slave_dev->priv_flags &= ~IFF_BONDING;
2040 return 0; /* deletion OK */
2043 /* A wrapper used because of ndo_del_link */
2044 int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
2046 return __bond_release_one(bond_dev, slave_dev, false);
2050 * First release a slave and then destroy the bond if no more slaves are left.
2051 * Must be under rtnl_lock when this function is called.
2053 static int bond_release_and_destroy(struct net_device *bond_dev,
2054 struct net_device *slave_dev)
2056 struct bonding *bond = netdev_priv(bond_dev);
2059 ret = bond_release(bond_dev, slave_dev);
2060 if (ret == 0 && list_empty(&bond->slave_list)) {
2061 bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
2062 pr_info("%s: destroying bond %s.\n",
2063 bond_dev->name, bond_dev->name);
2064 unregister_netdevice(bond_dev);
2070 * This function changes the active slave to slave <slave_dev>.
2071 * It returns -EINVAL in the following cases.
2072 * - <slave_dev> is not found in the list.
2073 * - There is not active slave now.
2074 * - <slave_dev> is already active.
2075 * - The link state of <slave_dev> is not BOND_LINK_UP.
2076 * - <slave_dev> is not running.
2077 * In these cases, this function does nothing.
2078 * In the other cases, current_slave pointer is changed and 0 is returned.
2080 static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
2082 struct bonding *bond = netdev_priv(bond_dev);
2083 struct slave *old_active = NULL;
2084 struct slave *new_active = NULL;
2087 if (!USES_PRIMARY(bond->params.mode))
2090 /* Verify that bond_dev is indeed the master of slave_dev */
2091 if (!(slave_dev->flags & IFF_SLAVE) ||
2092 !netdev_has_upper_dev(slave_dev, bond_dev))
2095 read_lock(&bond->lock);
2097 old_active = bond->curr_active_slave;
2098 new_active = bond_get_slave_by_dev(bond, slave_dev);
2100 * Changing to the current active: do nothing; return success.
2102 if (new_active && new_active == old_active) {
2103 read_unlock(&bond->lock);
2109 new_active->link == BOND_LINK_UP &&
2110 IS_UP(new_active->dev)) {
2112 write_lock_bh(&bond->curr_slave_lock);
2113 bond_change_active_slave(bond, new_active);
2114 write_unlock_bh(&bond->curr_slave_lock);
2115 unblock_netpoll_tx();
2119 read_unlock(&bond->lock);
2124 static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
2126 struct bonding *bond = netdev_priv(bond_dev);
2128 info->bond_mode = bond->params.mode;
2129 info->miimon = bond->params.miimon;
2131 read_lock(&bond->lock);
2132 info->num_slaves = bond->slave_cnt;
2133 read_unlock(&bond->lock);
2138 static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
2140 struct bonding *bond = netdev_priv(bond_dev);
2141 int i = 0, res = -ENODEV;
2142 struct slave *slave;
2144 read_lock(&bond->lock);
2145 bond_for_each_slave(bond, slave) {
2146 if (i++ == (int)info->slave_id) {
2148 strcpy(info->slave_name, slave->dev->name);
2149 info->link = slave->link;
2150 info->state = bond_slave_state(slave);
2151 info->link_failure_count = slave->link_failure_count;
2155 read_unlock(&bond->lock);
2160 /*-------------------------------- Monitoring -------------------------------*/
2163 static int bond_miimon_inspect(struct bonding *bond)
2165 int link_state, commit = 0;
2166 struct slave *slave;
2167 bool ignore_updelay;
2169 ignore_updelay = !bond->curr_active_slave ? true : false;
2171 bond_for_each_slave(bond, slave) {
2172 slave->new_link = BOND_LINK_NOCHANGE;
2174 link_state = bond_check_dev_link(bond, slave->dev, 0);
2176 switch (slave->link) {
2181 slave->link = BOND_LINK_FAIL;
2182 slave->delay = bond->params.downdelay;
2184 pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
2186 (bond->params.mode ==
2187 BOND_MODE_ACTIVEBACKUP) ?
2188 (bond_is_active_slave(slave) ?
2189 "active " : "backup ") : "",
2191 bond->params.downdelay * bond->params.miimon);
2194 case BOND_LINK_FAIL:
2197 * recovered before downdelay expired
2199 slave->link = BOND_LINK_UP;
2200 slave->jiffies = jiffies;
2201 pr_info("%s: link status up again after %d ms for interface %s.\n",
2203 (bond->params.downdelay - slave->delay) *
2204 bond->params.miimon,
2209 if (slave->delay <= 0) {
2210 slave->new_link = BOND_LINK_DOWN;
2218 case BOND_LINK_DOWN:
2222 slave->link = BOND_LINK_BACK;
2223 slave->delay = bond->params.updelay;
2226 pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
2227 bond->dev->name, slave->dev->name,
2228 ignore_updelay ? 0 :
2229 bond->params.updelay *
2230 bond->params.miimon);
2233 case BOND_LINK_BACK:
2235 slave->link = BOND_LINK_DOWN;
2236 pr_info("%s: link status down again after %d ms for interface %s.\n",
2238 (bond->params.updelay - slave->delay) *
2239 bond->params.miimon,
2248 if (slave->delay <= 0) {
2249 slave->new_link = BOND_LINK_UP;
2251 ignore_updelay = false;
2263 static void bond_miimon_commit(struct bonding *bond)
2265 struct slave *slave;
2267 bond_for_each_slave(bond, slave) {
2268 switch (slave->new_link) {
2269 case BOND_LINK_NOCHANGE:
2273 slave->link = BOND_LINK_UP;
2274 slave->jiffies = jiffies;
2276 if (bond->params.mode == BOND_MODE_8023AD) {
2277 /* prevent it from being the active one */
2278 bond_set_backup_slave(slave);
2279 } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
2280 /* make it immediately active */
2281 bond_set_active_slave(slave);
2282 } else if (slave != bond->primary_slave) {
2283 /* prevent it from being the active one */
2284 bond_set_backup_slave(slave);
2287 pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
2288 bond->dev->name, slave->dev->name,
2289 slave->speed == SPEED_UNKNOWN ? 0 : slave->speed,
2290 slave->duplex ? "full" : "half");
2292 /* notify ad that the link status has changed */
2293 if (bond->params.mode == BOND_MODE_8023AD)
2294 bond_3ad_handle_link_change(slave, BOND_LINK_UP);
2296 if (bond_is_lb(bond))
2297 bond_alb_handle_link_change(bond, slave,
2300 if (!bond->curr_active_slave ||
2301 (slave == bond->primary_slave))
2306 case BOND_LINK_DOWN:
2307 if (slave->link_failure_count < UINT_MAX)
2308 slave->link_failure_count++;
2310 slave->link = BOND_LINK_DOWN;
2312 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
2313 bond->params.mode == BOND_MODE_8023AD)
2314 bond_set_slave_inactive_flags(slave);
2316 pr_info("%s: link status definitely down for interface %s, disabling it\n",
2317 bond->dev->name, slave->dev->name);
2319 if (bond->params.mode == BOND_MODE_8023AD)
2320 bond_3ad_handle_link_change(slave,
2323 if (bond_is_lb(bond))
2324 bond_alb_handle_link_change(bond, slave,
2327 if (slave == bond->curr_active_slave)
2333 pr_err("%s: invalid new link %d on slave %s\n",
2334 bond->dev->name, slave->new_link,
2336 slave->new_link = BOND_LINK_NOCHANGE;
2344 write_lock_bh(&bond->curr_slave_lock);
2345 bond_select_active_slave(bond);
2346 write_unlock_bh(&bond->curr_slave_lock);
2347 unblock_netpoll_tx();
2350 bond_set_carrier(bond);
2356 * Really a wrapper that splits the mii monitor into two phases: an
2357 * inspection, then (if inspection indicates something needs to be done)
2358 * an acquisition of appropriate locks followed by a commit phase to
2359 * implement whatever link state changes are indicated.
2361 void bond_mii_monitor(struct work_struct *work)
2363 struct bonding *bond = container_of(work, struct bonding,
2365 bool should_notify_peers = false;
2366 unsigned long delay;
2368 read_lock(&bond->lock);
2370 delay = msecs_to_jiffies(bond->params.miimon);
2372 if (list_empty(&bond->slave_list))
2375 should_notify_peers = bond_should_notify_peers(bond);
2377 if (bond_miimon_inspect(bond)) {
2378 read_unlock(&bond->lock);
2380 /* Race avoidance with bond_close cancel of workqueue */
2381 if (!rtnl_trylock()) {
2382 read_lock(&bond->lock);
2384 should_notify_peers = false;
2388 read_lock(&bond->lock);
2390 bond_miimon_commit(bond);
2392 read_unlock(&bond->lock);
2393 rtnl_unlock(); /* might sleep, hold no other locks */
2394 read_lock(&bond->lock);
2398 if (bond->params.miimon)
2399 queue_delayed_work(bond->wq, &bond->mii_work, delay);
2401 read_unlock(&bond->lock);
2403 if (should_notify_peers) {
2404 if (!rtnl_trylock()) {
2405 read_lock(&bond->lock);
2406 bond->send_peer_notif++;
2407 read_unlock(&bond->lock);
2410 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev);
2415 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
2417 struct vlan_entry *vlan;
2418 struct net_device *vlan_dev;
2420 if (ip == bond_confirm_addr(bond->dev, 0, ip))
2423 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2425 vlan_dev = __vlan_find_dev_deep(bond->dev, htons(ETH_P_8021Q),
2428 if (vlan_dev && ip == bond_confirm_addr(vlan_dev, 0, ip))
2436 * We go to the (large) trouble of VLAN tagging ARP frames because
2437 * switches in VLAN mode (especially if ports are configured as
2438 * "native" to a VLAN) might not pass non-tagged frames.
2440 static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
2442 struct sk_buff *skb;
2444 pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op,
2445 slave_dev->name, &dest_ip, &src_ip, vlan_id);
2447 skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
2448 NULL, slave_dev->dev_addr, NULL);
2451 pr_err("ARP packet allocation failed\n");
2455 skb = vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
2457 pr_err("failed to insert VLAN tag\n");
2465 static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
2468 __be32 *targets = bond->params.arp_targets;
2469 struct vlan_entry *vlan;
2470 struct net_device *vlan_dev = NULL;
2473 for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
2477 pr_debug("basa: target %pI4\n", &targets[i]);
2478 if (!bond_vlan_used(bond)) {
2479 pr_debug("basa: empty vlan: arp_send\n");
2480 addr = bond_confirm_addr(bond->dev, targets[i], 0);
2481 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2487 * If VLANs are configured, we do a route lookup to
2488 * determine which VLAN interface would be used, so we
2489 * can tag the ARP with the proper VLAN tag.
2491 rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
2494 if (net_ratelimit()) {
2495 pr_warning("%s: no route to arp_ip_target %pI4\n",
2496 bond->dev->name, &targets[i]);
2502 * This target is not on a VLAN
2504 if (rt->dst.dev == bond->dev) {
2506 pr_debug("basa: rtdev == bond->dev: arp_send\n");
2507 addr = bond_confirm_addr(bond->dev, targets[i], 0);
2508 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2514 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2516 vlan_dev = __vlan_find_dev_deep(bond->dev,
2520 if (vlan_dev == rt->dst.dev) {
2521 vlan_id = vlan->vlan_id;
2522 pr_debug("basa: vlan match on %s %d\n",
2523 vlan_dev->name, vlan_id);
2528 if (vlan_id && vlan_dev) {
2530 addr = bond_confirm_addr(vlan_dev, targets[i], 0);
2531 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2536 if (net_ratelimit()) {
2537 pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
2538 bond->dev->name, &targets[i],
2539 rt->dst.dev ? rt->dst.dev->name : "NULL");
2545 static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
2549 if (!sip || !bond_has_this_ip(bond, tip)) {
2550 pr_debug("bva: sip %pI4 tip %pI4 not found\n", &sip, &tip);
2554 i = bond_get_targets_ip(bond->params.arp_targets, sip);
2556 pr_debug("bva: sip %pI4 not found in targets\n", &sip);
2559 slave->last_arp_rx = jiffies;
2560 slave->target_last_arp_rx[i] = jiffies;
2563 static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
2564 struct slave *slave)
2566 struct arphdr *arp = (struct arphdr *)skb->data;
2567 unsigned char *arp_ptr;
2571 if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
2572 return RX_HANDLER_ANOTHER;
2574 read_lock(&bond->lock);
2576 if (!slave_do_arp_validate(bond, slave))
2579 alen = arp_hdr_len(bond->dev);
2581 pr_debug("bond_arp_rcv: bond %s skb->dev %s\n",
2582 bond->dev->name, skb->dev->name);
2584 if (alen > skb_headlen(skb)) {
2585 arp = kmalloc(alen, GFP_ATOMIC);
2588 if (skb_copy_bits(skb, 0, arp, alen) < 0)
2592 if (arp->ar_hln != bond->dev->addr_len ||
2593 skb->pkt_type == PACKET_OTHERHOST ||
2594 skb->pkt_type == PACKET_LOOPBACK ||
2595 arp->ar_hrd != htons(ARPHRD_ETHER) ||
2596 arp->ar_pro != htons(ETH_P_IP) ||
2600 arp_ptr = (unsigned char *)(arp + 1);
2601 arp_ptr += bond->dev->addr_len;
2602 memcpy(&sip, arp_ptr, 4);
2603 arp_ptr += 4 + bond->dev->addr_len;
2604 memcpy(&tip, arp_ptr, 4);
2606 pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2607 bond->dev->name, slave->dev->name, bond_slave_state(slave),
2608 bond->params.arp_validate, slave_do_arp_validate(bond, slave),
2612 * Backup slaves won't see the ARP reply, but do come through
2613 * here for each ARP probe (so we swap the sip/tip to validate
2614 * the probe). In a "redundant switch, common router" type of
2615 * configuration, the ARP probe will (hopefully) travel from
2616 * the active, through one switch, the router, then the other
2617 * switch before reaching the backup.
2619 * We 'trust' the arp requests if there is an active slave and
2620 * it received valid arp reply(s) after it became active. This
2621 * is done to avoid endless looping when we can't reach the
2622 * arp_ip_target and fool ourselves with our own arp requests.
2624 if (bond_is_active_slave(slave))
2625 bond_validate_arp(bond, slave, sip, tip);
2626 else if (bond->curr_active_slave &&
2627 time_after(slave_last_rx(bond, bond->curr_active_slave),
2628 bond->curr_active_slave->jiffies))
2629 bond_validate_arp(bond, slave, tip, sip);
2632 read_unlock(&bond->lock);
2633 if (arp != (struct arphdr *)skb->data)
2635 return RX_HANDLER_ANOTHER;
2638 /* function to verify if we're in the arp_interval timeslice, returns true if
2639 * (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval +
2640 * arp_interval/2) . the arp_interval/2 is needed for really fast networks.
2642 static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
2645 int delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
2647 return time_in_range(jiffies,
2648 last_act - delta_in_ticks,
2649 last_act + mod * delta_in_ticks + delta_in_ticks/2);
2653 * this function is called regularly to monitor each slave's link
2654 * ensuring that traffic is being sent and received when arp monitoring
2655 * is used in load-balancing mode. if the adapter has been dormant, then an
2656 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2657 * arp monitoring in active backup mode.
2659 void bond_loadbalance_arp_mon(struct work_struct *work)
2661 struct bonding *bond = container_of(work, struct bonding,
2663 struct slave *slave, *oldcurrent;
2664 int do_failover = 0;
2666 read_lock(&bond->lock);
2668 if (list_empty(&bond->slave_list))
2671 oldcurrent = bond->curr_active_slave;
2672 /* see if any of the previous devices are up now (i.e. they have
2673 * xmt and rcv traffic). the curr_active_slave does not come into
2674 * the picture unless it is null. also, slave->jiffies is not needed
2675 * here because we send an arp on each slave and give a slave as
2676 * long as it needs to get the tx/rx within the delta.
2677 * TODO: what about up/down delay in arp mode? it wasn't here before
2680 bond_for_each_slave(bond, slave) {
2681 unsigned long trans_start = dev_trans_start(slave->dev);
2683 if (slave->link != BOND_LINK_UP) {
2684 if (bond_time_in_interval(bond, trans_start, 1) &&
2685 bond_time_in_interval(bond, slave->dev->last_rx, 1)) {
2687 slave->link = BOND_LINK_UP;
2688 bond_set_active_slave(slave);
2690 /* primary_slave has no meaning in round-robin
2691 * mode. the window of a slave being up and
2692 * curr_active_slave being null after enslaving
2696 pr_info("%s: link status definitely up for interface %s, ",
2701 pr_info("%s: interface %s is now up\n",
2707 /* slave->link == BOND_LINK_UP */
2709 /* not all switches will respond to an arp request
2710 * when the source ip is 0, so don't take the link down
2711 * if we don't know our ip yet
2713 if (!bond_time_in_interval(bond, trans_start, 2) ||
2714 !bond_time_in_interval(bond, slave->dev->last_rx, 2)) {
2716 slave->link = BOND_LINK_DOWN;
2717 bond_set_backup_slave(slave);
2719 if (slave->link_failure_count < UINT_MAX)
2720 slave->link_failure_count++;
2722 pr_info("%s: interface %s is now down.\n",
2726 if (slave == oldcurrent)
2731 /* note: if switch is in round-robin mode, all links
2732 * must tx arp to ensure all links rx an arp - otherwise
2733 * links may oscillate or not come up at all; if switch is
2734 * in something like xor mode, there is nothing we can
2735 * do - all replies will be rx'ed on same link causing slaves
2736 * to be unstable during low/no traffic periods
2738 if (IS_UP(slave->dev))
2739 bond_arp_send_all(bond, slave);
2744 write_lock_bh(&bond->curr_slave_lock);
2746 bond_select_active_slave(bond);
2748 write_unlock_bh(&bond->curr_slave_lock);
2749 unblock_netpoll_tx();
2753 if (bond->params.arp_interval)
2754 queue_delayed_work(bond->wq, &bond->arp_work,
2755 msecs_to_jiffies(bond->params.arp_interval));
2757 read_unlock(&bond->lock);
2761 * Called to inspect slaves for active-backup mode ARP monitor link state
2762 * changes. Sets new_link in slaves to specify what action should take
2763 * place for the slave. Returns 0 if no changes are found, >0 if changes
2764 * to link states must be committed.
2766 * Called with bond->lock held for read.
2768 static int bond_ab_arp_inspect(struct bonding *bond)
2770 unsigned long trans_start, last_rx;
2771 struct slave *slave;
2774 bond_for_each_slave(bond, slave) {
2775 slave->new_link = BOND_LINK_NOCHANGE;
2776 last_rx = slave_last_rx(bond, slave);
2778 if (slave->link != BOND_LINK_UP) {
2779 if (bond_time_in_interval(bond, last_rx, 1)) {
2780 slave->new_link = BOND_LINK_UP;
2787 * Give slaves 2*delta after being enslaved or made
2788 * active. This avoids bouncing, as the last receive
2789 * times need a full ARP monitor cycle to be updated.
2791 if (bond_time_in_interval(bond, slave->jiffies, 2))
2795 * Backup slave is down if:
2796 * - No current_arp_slave AND
2797 * - more than 3*delta since last receive AND
2798 * - the bond has an IP address
2800 * Note: a non-null current_arp_slave indicates
2801 * the curr_active_slave went down and we are
2802 * searching for a new one; under this condition
2803 * we only take the curr_active_slave down - this
2804 * gives each slave a chance to tx/rx traffic
2805 * before being taken out
2807 if (!bond_is_active_slave(slave) &&
2808 !bond->current_arp_slave &&
2809 !bond_time_in_interval(bond, last_rx, 3)) {
2810 slave->new_link = BOND_LINK_DOWN;
2815 * Active slave is down if:
2816 * - more than 2*delta since transmitting OR
2817 * - (more than 2*delta since receive AND
2818 * the bond has an IP address)
2820 trans_start = dev_trans_start(slave->dev);
2821 if (bond_is_active_slave(slave) &&
2822 (!bond_time_in_interval(bond, trans_start, 2) ||
2823 !bond_time_in_interval(bond, last_rx, 2))) {
2824 slave->new_link = BOND_LINK_DOWN;
2833 * Called to commit link state changes noted by inspection step of
2834 * active-backup mode ARP monitor.
2836 * Called with RTNL and bond->lock for read.
2838 static void bond_ab_arp_commit(struct bonding *bond)
2840 unsigned long trans_start;
2841 struct slave *slave;
2843 bond_for_each_slave(bond, slave) {
2844 switch (slave->new_link) {
2845 case BOND_LINK_NOCHANGE:
2849 trans_start = dev_trans_start(slave->dev);
2850 if (bond->curr_active_slave != slave ||
2851 (!bond->curr_active_slave &&
2852 bond_time_in_interval(bond, trans_start, 1))) {
2853 slave->link = BOND_LINK_UP;
2854 if (bond->current_arp_slave) {
2855 bond_set_slave_inactive_flags(
2856 bond->current_arp_slave);
2857 bond->current_arp_slave = NULL;
2860 pr_info("%s: link status definitely up for interface %s.\n",
2861 bond->dev->name, slave->dev->name);
2863 if (!bond->curr_active_slave ||
2864 (slave == bond->primary_slave))
2871 case BOND_LINK_DOWN:
2872 if (slave->link_failure_count < UINT_MAX)
2873 slave->link_failure_count++;
2875 slave->link = BOND_LINK_DOWN;
2876 bond_set_slave_inactive_flags(slave);
2878 pr_info("%s: link status definitely down for interface %s, disabling it\n",
2879 bond->dev->name, slave->dev->name);
2881 if (slave == bond->curr_active_slave) {
2882 bond->current_arp_slave = NULL;
2889 pr_err("%s: impossible: new_link %d on slave %s\n",
2890 bond->dev->name, slave->new_link,
2898 write_lock_bh(&bond->curr_slave_lock);
2899 bond_select_active_slave(bond);
2900 write_unlock_bh(&bond->curr_slave_lock);
2901 unblock_netpoll_tx();
2904 bond_set_carrier(bond);
2908 * Send ARP probes for active-backup mode ARP monitor.
2910 * Called with bond->lock held for read.
2912 static void bond_ab_arp_probe(struct bonding *bond)
2914 struct slave *slave, *next_slave;
2917 read_lock(&bond->curr_slave_lock);
2919 if (bond->current_arp_slave && bond->curr_active_slave)
2920 pr_info("PROBE: c_arp %s && cas %s BAD\n",
2921 bond->current_arp_slave->dev->name,
2922 bond->curr_active_slave->dev->name);
2924 if (bond->curr_active_slave) {
2925 bond_arp_send_all(bond, bond->curr_active_slave);
2926 read_unlock(&bond->curr_slave_lock);
2930 read_unlock(&bond->curr_slave_lock);
2932 /* if we don't have a curr_active_slave, search for the next available
2933 * backup slave from the current_arp_slave and make it the candidate
2934 * for becoming the curr_active_slave
2937 if (!bond->current_arp_slave) {
2938 bond->current_arp_slave = bond_first_slave(bond);
2939 if (!bond->current_arp_slave)
2943 bond_set_slave_inactive_flags(bond->current_arp_slave);
2945 /* search for next candidate */
2946 next_slave = bond_next_slave(bond, bond->current_arp_slave);
2947 bond_for_each_slave_from(bond, slave, i, next_slave) {
2948 if (IS_UP(slave->dev)) {
2949 slave->link = BOND_LINK_BACK;
2950 bond_set_slave_active_flags(slave);
2951 bond_arp_send_all(bond, slave);
2952 slave->jiffies = jiffies;
2953 bond->current_arp_slave = slave;
2957 /* if the link state is up at this point, we
2958 * mark it down - this can happen if we have
2959 * simultaneous link failures and
2960 * reselect_active_interface doesn't make this
2961 * one the current slave so it is still marked
2962 * up when it is actually down
2964 if (slave->link == BOND_LINK_UP) {
2965 slave->link = BOND_LINK_DOWN;
2966 if (slave->link_failure_count < UINT_MAX)
2967 slave->link_failure_count++;
2969 bond_set_slave_inactive_flags(slave);
2971 pr_info("%s: backup interface %s is now down.\n",
2972 bond->dev->name, slave->dev->name);
2977 void bond_activebackup_arp_mon(struct work_struct *work)
2979 struct bonding *bond = container_of(work, struct bonding,
2981 bool should_notify_peers = false;
2984 read_lock(&bond->lock);
2986 delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
2988 if (list_empty(&bond->slave_list))
2991 should_notify_peers = bond_should_notify_peers(bond);
2993 if (bond_ab_arp_inspect(bond)) {
2994 read_unlock(&bond->lock);
2996 /* Race avoidance with bond_close flush of workqueue */
2997 if (!rtnl_trylock()) {
2998 read_lock(&bond->lock);
3000 should_notify_peers = false;
3004 read_lock(&bond->lock);
3006 bond_ab_arp_commit(bond);
3008 read_unlock(&bond->lock);
3010 read_lock(&bond->lock);
3013 bond_ab_arp_probe(bond);
3016 if (bond->params.arp_interval)
3017 queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
3019 read_unlock(&bond->lock);
3021 if (should_notify_peers) {
3022 if (!rtnl_trylock()) {
3023 read_lock(&bond->lock);
3024 bond->send_peer_notif++;
3025 read_unlock(&bond->lock);
3028 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev);
3033 /*-------------------------- netdev event handling --------------------------*/
3036 * Change device name
3038 static int bond_event_changename(struct bonding *bond)
3040 bond_remove_proc_entry(bond);
3041 bond_create_proc_entry(bond);
3043 bond_debug_reregister(bond);
3048 static int bond_master_netdev_event(unsigned long event,
3049 struct net_device *bond_dev)
3051 struct bonding *event_bond = netdev_priv(bond_dev);
3054 case NETDEV_CHANGENAME:
3055 return bond_event_changename(event_bond);
3056 case NETDEV_UNREGISTER:
3057 bond_remove_proc_entry(event_bond);
3059 case NETDEV_REGISTER:
3060 bond_create_proc_entry(event_bond);
3069 static int bond_slave_netdev_event(unsigned long event,
3070 struct net_device *slave_dev)
3072 struct slave *slave = bond_slave_get_rtnl(slave_dev);
3073 struct bonding *bond;
3074 struct net_device *bond_dev;
3078 /* A netdev event can be generated while enslaving a device
3079 * before netdev_rx_handler_register is called in which case
3080 * slave will be NULL
3084 bond_dev = slave->bond->dev;
3088 case NETDEV_UNREGISTER:
3089 if (bond_dev->type != ARPHRD_ETHER)
3090 bond_release_and_destroy(bond_dev, slave_dev);
3092 bond_release(bond_dev, slave_dev);
3096 old_speed = slave->speed;
3097 old_duplex = slave->duplex;
3099 bond_update_speed_duplex(slave);
3101 if (bond->params.mode == BOND_MODE_8023AD) {
3102 if (old_speed != slave->speed)
3103 bond_3ad_adapter_speed_changed(slave);
3104 if (old_duplex != slave->duplex)
3105 bond_3ad_adapter_duplex_changed(slave);
3110 * ... Or is it this?
3113 case NETDEV_CHANGEMTU:
3115 * TODO: Should slaves be allowed to
3116 * independently alter their MTU? For
3117 * an active-backup bond, slaves need
3118 * not be the same type of device, so
3119 * MTUs may vary. For other modes,
3120 * slaves arguably should have the
3121 * same MTUs. To do this, we'd need to
3122 * take over the slave's change_mtu
3123 * function for the duration of their
3127 case NETDEV_CHANGENAME:
3129 * TODO: handle changing the primary's name
3132 case NETDEV_FEAT_CHANGE:
3133 bond_compute_features(bond);
3135 case NETDEV_RESEND_IGMP:
3136 /* Propagate to master device */
3137 call_netdevice_notifiers(event, slave->bond->dev);
3147 * bond_netdev_event: handle netdev notifier chain events.
3149 * This function receives events for the netdev chain. The caller (an
3150 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3151 * locks for us to safely manipulate the slave devices (RTNL lock,
3154 static int bond_netdev_event(struct notifier_block *this,
3155 unsigned long event, void *ptr)
3157 struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
3159 pr_debug("event_dev: %s, event: %lx\n",
3160 event_dev ? event_dev->name : "None",
3163 if (!(event_dev->priv_flags & IFF_BONDING))
3166 if (event_dev->flags & IFF_MASTER) {
3167 pr_debug("IFF_MASTER\n");
3168 return bond_master_netdev_event(event, event_dev);
3171 if (event_dev->flags & IFF_SLAVE) {
3172 pr_debug("IFF_SLAVE\n");
3173 return bond_slave_netdev_event(event, event_dev);
3179 static struct notifier_block bond_netdev_notifier = {
3180 .notifier_call = bond_netdev_event,
3183 /*---------------------------- Hashing Policies -----------------------------*/
3186 * Hash for the output device based upon layer 2 data
3188 static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
3190 struct ethhdr *data = (struct ethhdr *)skb->data;
3192 if (skb_headlen(skb) >= offsetof(struct ethhdr, h_proto))
3193 return (data->h_dest[5] ^ data->h_source[5]) % count;
3199 * Hash for the output device based upon layer 2 and layer 3 data. If
3200 * the packet is not IP, fall back on bond_xmit_hash_policy_l2()
3202 static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
3204 const struct ethhdr *data;
3205 const struct iphdr *iph;
3206 const struct ipv6hdr *ipv6h;
3208 const __be32 *s, *d;
3210 if (skb->protocol == htons(ETH_P_IP) &&
3211 pskb_network_may_pull(skb, sizeof(*iph))) {
3213 data = (struct ethhdr *)skb->data;
3214 return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
3215 (data->h_dest[5] ^ data->h_source[5])) % count;
3216 } else if (skb->protocol == htons(ETH_P_IPV6) &&
3217 pskb_network_may_pull(skb, sizeof(*ipv6h))) {
3218 ipv6h = ipv6_hdr(skb);
3219 data = (struct ethhdr *)skb->data;
3220 s = &ipv6h->saddr.s6_addr32[0];
3221 d = &ipv6h->daddr.s6_addr32[0];
3222 v6hash = (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]);
3223 v6hash ^= (v6hash >> 24) ^ (v6hash >> 16) ^ (v6hash >> 8);
3224 return (v6hash ^ data->h_dest[5] ^ data->h_source[5]) % count;
3227 return bond_xmit_hash_policy_l2(skb, count);
3231 * Hash for the output device based upon layer 3 and layer 4 data. If
3232 * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
3233 * altogether not IP, fall back on bond_xmit_hash_policy_l2()
3235 static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
3238 const struct iphdr *iph;
3239 const struct ipv6hdr *ipv6h;
3240 const __be32 *s, *d;
3241 const __be16 *l4 = NULL;
3243 int noff = skb_network_offset(skb);
3246 if (skb->protocol == htons(ETH_P_IP) &&
3247 pskb_may_pull(skb, noff + sizeof(*iph))) {
3249 poff = proto_ports_offset(iph->protocol);
3251 if (!ip_is_fragment(iph) && poff >= 0) {
3252 l4 = skb_header_pointer(skb, noff + (iph->ihl << 2) + poff,
3255 layer4_xor = ntohs(l4[0] ^ l4[1]);
3257 return (layer4_xor ^
3258 ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;
3259 } else if (skb->protocol == htons(ETH_P_IPV6) &&
3260 pskb_may_pull(skb, noff + sizeof(*ipv6h))) {
3261 ipv6h = ipv6_hdr(skb);
3262 poff = proto_ports_offset(ipv6h->nexthdr);
3264 l4 = skb_header_pointer(skb, noff + sizeof(*ipv6h) + poff,
3267 layer4_xor = ntohs(l4[0] ^ l4[1]);
3269 s = &ipv6h->saddr.s6_addr32[0];
3270 d = &ipv6h->daddr.s6_addr32[0];
3271 layer4_xor ^= (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]);
3272 layer4_xor ^= (layer4_xor >> 24) ^ (layer4_xor >> 16) ^
3274 return layer4_xor % count;
3277 return bond_xmit_hash_policy_l2(skb, count);
3280 /*-------------------------- Device entry points ----------------------------*/
3282 static void bond_work_init_all(struct bonding *bond)
3284 INIT_DELAYED_WORK(&bond->mcast_work,
3285 bond_resend_igmp_join_requests_delayed);
3286 INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
3287 INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
3288 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
3289 INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon);
3291 INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon);
3292 INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
3295 static void bond_work_cancel_all(struct bonding *bond)
3297 cancel_delayed_work_sync(&bond->mii_work);
3298 cancel_delayed_work_sync(&bond->arp_work);
3299 cancel_delayed_work_sync(&bond->alb_work);
3300 cancel_delayed_work_sync(&bond->ad_work);
3301 cancel_delayed_work_sync(&bond->mcast_work);
3304 static int bond_open(struct net_device *bond_dev)
3306 struct bonding *bond = netdev_priv(bond_dev);
3307 struct slave *slave;
3309 /* reset slave->backup and slave->inactive */
3310 read_lock(&bond->lock);
3311 if (!list_empty(&bond->slave_list)) {
3312 read_lock(&bond->curr_slave_lock);
3313 bond_for_each_slave(bond, slave) {
3314 if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
3315 && (slave != bond->curr_active_slave)) {
3316 bond_set_slave_inactive_flags(slave);
3318 bond_set_slave_active_flags(slave);
3321 read_unlock(&bond->curr_slave_lock);
3323 read_unlock(&bond->lock);
3325 bond_work_init_all(bond);
3327 if (bond_is_lb(bond)) {
3328 /* bond_alb_initialize must be called before the timer
3331 if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB)))
3333 queue_delayed_work(bond->wq, &bond->alb_work, 0);
3336 if (bond->params.miimon) /* link check interval, in milliseconds. */
3337 queue_delayed_work(bond->wq, &bond->mii_work, 0);
3339 if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
3340 queue_delayed_work(bond->wq, &bond->arp_work, 0);
3341 if (bond->params.arp_validate)
3342 bond->recv_probe = bond_arp_rcv;
3345 if (bond->params.mode == BOND_MODE_8023AD) {
3346 queue_delayed_work(bond->wq, &bond->ad_work, 0);
3347 /* register to receive LACPDUs */
3348 bond->recv_probe = bond_3ad_lacpdu_recv;
3349 bond_3ad_initiate_agg_selection(bond, 1);
3355 static int bond_close(struct net_device *bond_dev)
3357 struct bonding *bond = netdev_priv(bond_dev);
3359 write_lock_bh(&bond->lock);
3360 bond->send_peer_notif = 0;
3361 write_unlock_bh(&bond->lock);
3363 bond_work_cancel_all(bond);
3364 if (bond_is_lb(bond)) {
3365 /* Must be called only after all
3366 * slaves have been released
3368 bond_alb_deinitialize(bond);
3370 bond->recv_probe = NULL;
3375 static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
3376 struct rtnl_link_stats64 *stats)
3378 struct bonding *bond = netdev_priv(bond_dev);
3379 struct rtnl_link_stats64 temp;
3380 struct slave *slave;
3382 memset(stats, 0, sizeof(*stats));
3384 read_lock_bh(&bond->lock);
3385 bond_for_each_slave(bond, slave) {
3386 const struct rtnl_link_stats64 *sstats =
3387 dev_get_stats(slave->dev, &temp);
3389 stats->rx_packets += sstats->rx_packets;
3390 stats->rx_bytes += sstats->rx_bytes;
3391 stats->rx_errors += sstats->rx_errors;
3392 stats->rx_dropped += sstats->rx_dropped;
3394 stats->tx_packets += sstats->tx_packets;
3395 stats->tx_bytes += sstats->tx_bytes;
3396 stats->tx_errors += sstats->tx_errors;
3397 stats->tx_dropped += sstats->tx_dropped;
3399 stats->multicast += sstats->multicast;
3400 stats->collisions += sstats->collisions;
3402 stats->rx_length_errors += sstats->rx_length_errors;
3403 stats->rx_over_errors += sstats->rx_over_errors;
3404 stats->rx_crc_errors += sstats->rx_crc_errors;
3405 stats->rx_frame_errors += sstats->rx_frame_errors;
3406 stats->rx_fifo_errors += sstats->rx_fifo_errors;
3407 stats->rx_missed_errors += sstats->rx_missed_errors;
3409 stats->tx_aborted_errors += sstats->tx_aborted_errors;
3410 stats->tx_carrier_errors += sstats->tx_carrier_errors;
3411 stats->tx_fifo_errors += sstats->tx_fifo_errors;
3412 stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors;
3413 stats->tx_window_errors += sstats->tx_window_errors;
3415 read_unlock_bh(&bond->lock);
3420 static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
3422 struct net_device *slave_dev = NULL;
3423 struct ifbond k_binfo;
3424 struct ifbond __user *u_binfo = NULL;
3425 struct ifslave k_sinfo;
3426 struct ifslave __user *u_sinfo = NULL;
3427 struct mii_ioctl_data *mii = NULL;
3431 pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd);
3443 * We do this again just in case we were called by SIOCGMIIREG
3444 * instead of SIOCGMIIPHY.
3451 if (mii->reg_num == 1) {
3452 struct bonding *bond = netdev_priv(bond_dev);
3454 read_lock(&bond->lock);
3455 read_lock(&bond->curr_slave_lock);
3456 if (netif_carrier_ok(bond->dev))
3457 mii->val_out = BMSR_LSTATUS;
3459 read_unlock(&bond->curr_slave_lock);
3460 read_unlock(&bond->lock);
3464 case BOND_INFO_QUERY_OLD:
3465 case SIOCBONDINFOQUERY:
3466 u_binfo = (struct ifbond __user *)ifr->ifr_data;
3468 if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
3471 res = bond_info_query(bond_dev, &k_binfo);
3473 copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
3477 case BOND_SLAVE_INFO_QUERY_OLD:
3478 case SIOCBONDSLAVEINFOQUERY:
3479 u_sinfo = (struct ifslave __user *)ifr->ifr_data;
3481 if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
3484 res = bond_slave_info_query(bond_dev, &k_sinfo);
3486 copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
3495 net = dev_net(bond_dev);
3497 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
3500 slave_dev = dev_get_by_name(net, ifr->ifr_slave);
3502 pr_debug("slave_dev=%p:\n", slave_dev);
3507 pr_debug("slave_dev->name=%s:\n", slave_dev->name);
3509 case BOND_ENSLAVE_OLD:
3510 case SIOCBONDENSLAVE:
3511 res = bond_enslave(bond_dev, slave_dev);
3513 case BOND_RELEASE_OLD:
3514 case SIOCBONDRELEASE:
3515 res = bond_release(bond_dev, slave_dev);
3517 case BOND_SETHWADDR_OLD:
3518 case SIOCBONDSETHWADDR:
3519 bond_set_dev_addr(bond_dev, slave_dev);
3522 case BOND_CHANGE_ACTIVE_OLD:
3523 case SIOCBONDCHANGEACTIVE:
3524 res = bond_ioctl_change_active(bond_dev, slave_dev);
3536 static void bond_change_rx_flags(struct net_device *bond_dev, int change)
3538 struct bonding *bond = netdev_priv(bond_dev);
3540 if (change & IFF_PROMISC)
3541 bond_set_promiscuity(bond,
3542 bond_dev->flags & IFF_PROMISC ? 1 : -1);
3544 if (change & IFF_ALLMULTI)
3545 bond_set_allmulti(bond,
3546 bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
3549 static void bond_set_rx_mode(struct net_device *bond_dev)
3551 struct bonding *bond = netdev_priv(bond_dev);
3552 struct slave *slave;
3554 read_lock(&bond->lock);
3556 if (USES_PRIMARY(bond->params.mode)) {
3557 read_lock(&bond->curr_slave_lock);
3558 slave = bond->curr_active_slave;
3560 dev_uc_sync(slave->dev, bond_dev);
3561 dev_mc_sync(slave->dev, bond_dev);
3563 read_unlock(&bond->curr_slave_lock);
3565 bond_for_each_slave(bond, slave) {
3566 dev_uc_sync_multiple(slave->dev, bond_dev);
3567 dev_mc_sync_multiple(slave->dev, bond_dev);
3571 read_unlock(&bond->lock);
3574 static int bond_neigh_init(struct neighbour *n)
3576 struct bonding *bond = netdev_priv(n->dev);
3577 const struct net_device_ops *slave_ops;
3578 struct neigh_parms parms;
3579 struct slave *slave;
3582 slave = bond_first_slave(bond);
3585 slave_ops = slave->dev->netdev_ops;
3586 if (!slave_ops->ndo_neigh_setup)
3589 parms.neigh_setup = NULL;
3590 parms.neigh_cleanup = NULL;
3591 ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
3596 * Assign slave's neigh_cleanup to neighbour in case cleanup is called
3597 * after the last slave has been detached. Assumes that all slaves
3598 * utilize the same neigh_cleanup (true at this writing as only user
3601 n->parms->neigh_cleanup = parms.neigh_cleanup;
3603 if (!parms.neigh_setup)
3606 return parms.neigh_setup(n);
3610 * The bonding ndo_neigh_setup is called at init time beofre any
3611 * slave exists. So we must declare proxy setup function which will
3612 * be used at run time to resolve the actual slave neigh param setup.
3614 * It's also called by master devices (such as vlans) to setup their
3615 * underlying devices. In that case - do nothing, we're already set up from
3618 static int bond_neigh_setup(struct net_device *dev,
3619 struct neigh_parms *parms)
3621 /* modify only our neigh_parms */
3622 if (parms->dev == dev)
3623 parms->neigh_setup = bond_neigh_init;
3629 * Change the MTU of all of a master's slaves to match the master
3631 static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
3633 struct bonding *bond = netdev_priv(bond_dev);
3634 struct slave *slave;
3637 pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
3638 (bond_dev ? bond_dev->name : "None"), new_mtu);
3640 /* Can't hold bond->lock with bh disabled here since
3641 * some base drivers panic. On the other hand we can't
3642 * hold bond->lock without bh disabled because we'll
3643 * deadlock. The only solution is to rely on the fact
3644 * that we're under rtnl_lock here, and the slaves
3645 * list won't change. This doesn't solve the problem
3646 * of setting the slave's MTU while it is
3647 * transmitting, but the assumption is that the base
3648 * driver can handle that.
3650 * TODO: figure out a way to safely iterate the slaves
3651 * list, but without holding a lock around the actual
3652 * call to the base driver.
3655 bond_for_each_slave(bond, slave) {
3656 pr_debug("s %p s->p %p c_m %p\n",
3658 bond_prev_slave(bond, slave),
3659 slave->dev->netdev_ops->ndo_change_mtu);
3661 res = dev_set_mtu(slave->dev, new_mtu);
3664 /* If we failed to set the slave's mtu to the new value
3665 * we must abort the operation even in ACTIVE_BACKUP
3666 * mode, because if we allow the backup slaves to have
3667 * different mtu values than the active slave we'll
3668 * need to change their mtu when doing a failover. That
3669 * means changing their mtu from timer context, which
3670 * is probably not a good idea.
3672 pr_debug("err %d %s\n", res, slave->dev->name);
3677 bond_dev->mtu = new_mtu;
3682 /* unwind from head to the slave that failed */
3683 bond_for_each_slave_continue_reverse(bond, slave) {
3686 tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
3688 pr_debug("unwind err %d dev %s\n",
3689 tmp_res, slave->dev->name);
3699 * Note that many devices must be down to change the HW address, and
3700 * downing the master releases all slaves. We can make bonds full of
3701 * bonding devices to test this, however.
3703 static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
3705 struct bonding *bond = netdev_priv(bond_dev);
3706 struct sockaddr *sa = addr, tmp_sa;
3707 struct slave *slave;
3710 if (bond->params.mode == BOND_MODE_ALB)
3711 return bond_alb_set_mac_address(bond_dev, addr);
3714 pr_debug("bond=%p, name=%s\n",
3715 bond, bond_dev ? bond_dev->name : "None");
3717 /* If fail_over_mac is enabled, do nothing and return success.
3718 * Returning an error causes ifenslave to fail.
3720 if (bond->params.fail_over_mac)
3723 if (!is_valid_ether_addr(sa->sa_data))
3724 return -EADDRNOTAVAIL;
3726 /* Can't hold bond->lock with bh disabled here since
3727 * some base drivers panic. On the other hand we can't
3728 * hold bond->lock without bh disabled because we'll
3729 * deadlock. The only solution is to rely on the fact
3730 * that we're under rtnl_lock here, and the slaves
3731 * list won't change. This doesn't solve the problem
3732 * of setting the slave's hw address while it is
3733 * transmitting, but the assumption is that the base
3734 * driver can handle that.
3736 * TODO: figure out a way to safely iterate the slaves
3737 * list, but without holding a lock around the actual
3738 * call to the base driver.
3741 bond_for_each_slave(bond, slave) {
3742 const struct net_device_ops *slave_ops = slave->dev->netdev_ops;
3743 pr_debug("slave %p %s\n", slave, slave->dev->name);
3745 if (slave_ops->ndo_set_mac_address == NULL) {
3747 pr_debug("EOPNOTSUPP %s\n", slave->dev->name);
3751 res = dev_set_mac_address(slave->dev, addr);
3753 /* TODO: consider downing the slave
3755 * User should expect communications
3756 * breakage anyway until ARP finish
3759 pr_debug("err %d %s\n", res, slave->dev->name);
3765 memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
3769 memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
3770 tmp_sa.sa_family = bond_dev->type;
3772 /* unwind from head to the slave that failed */
3773 bond_for_each_slave_continue_reverse(bond, slave) {
3776 tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
3778 pr_debug("unwind err %d dev %s\n",
3779 tmp_res, slave->dev->name);
3787 * bond_xmit_slave_id - transmit skb through slave with slave_id
3788 * @bond: bonding device that is transmitting
3789 * @skb: buffer to transmit
3790 * @slave_id: slave id up to slave_cnt-1 through which to transmit
3792 * This function tries to transmit through slave with slave_id but in case
3793 * it fails, it tries to find the first available slave for transmission.
3794 * The skb is consumed in all cases, thus the function is void.
3796 void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id)
3798 struct slave *slave;
3801 /* Here we start from the slave with slave_id */
3802 bond_for_each_slave_rcu(bond, slave) {
3804 if (slave_can_tx(slave)) {
3805 bond_dev_queue_xmit(bond, skb, slave->dev);
3811 /* Here we start from the first slave up to slave_id */
3813 bond_for_each_slave_rcu(bond, slave) {
3816 if (slave_can_tx(slave)) {
3817 bond_dev_queue_xmit(bond, skb, slave->dev);
3821 /* no slave that can tx has been found */
3825 static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
3827 struct bonding *bond = netdev_priv(bond_dev);
3828 struct iphdr *iph = ip_hdr(skb);
3829 struct slave *slave;
3832 * Start with the curr_active_slave that joined the bond as the
3833 * default for sending IGMP traffic. For failover purposes one
3834 * needs to maintain some consistency for the interface that will
3835 * send the join/membership reports. The curr_active_slave found
3836 * will send all of this type of traffic.
3838 if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) {
3839 slave = rcu_dereference(bond->curr_active_slave);
3840 if (slave && slave_can_tx(slave))
3841 bond_dev_queue_xmit(bond, skb, slave->dev);
3843 bond_xmit_slave_id(bond, skb, 0);
3845 bond_xmit_slave_id(bond, skb,
3846 bond->rr_tx_counter++ % bond->slave_cnt);
3849 return NETDEV_TX_OK;
3853 * in active-backup mode, we know that bond->curr_active_slave is always valid if
3854 * the bond has a usable interface.
3856 static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
3858 struct bonding *bond = netdev_priv(bond_dev);
3859 struct slave *slave;
3861 slave = rcu_dereference(bond->curr_active_slave);
3863 bond_dev_queue_xmit(bond, skb, slave->dev);
3867 return NETDEV_TX_OK;
3871 * In bond_xmit_xor() , we determine the output device by using a pre-
3872 * determined xmit_hash_policy(), If the selected device is not enabled,
3873 * find the next active slave.
3875 static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
3877 struct bonding *bond = netdev_priv(bond_dev);
3879 bond_xmit_slave_id(bond, skb,
3880 bond->xmit_hash_policy(skb, bond->slave_cnt));
3882 return NETDEV_TX_OK;
3885 /* in broadcast mode, we send everything to all usable interfaces. */
3886 static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
3888 struct bonding *bond = netdev_priv(bond_dev);
3889 struct slave *slave = NULL;
3891 bond_for_each_slave_rcu(bond, slave) {
3892 if (bond_is_last_slave(bond, slave))
3894 if (IS_UP(slave->dev) && slave->link == BOND_LINK_UP) {
3895 struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
3898 pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
3902 /* bond_dev_queue_xmit always returns 0 */
3903 bond_dev_queue_xmit(bond, skb2, slave->dev);
3906 if (slave && IS_UP(slave->dev) && slave->link == BOND_LINK_UP)
3907 bond_dev_queue_xmit(bond, skb, slave->dev);
3911 return NETDEV_TX_OK;
3914 /*------------------------- Device initialization ---------------------------*/
3916 static void bond_set_xmit_hash_policy(struct bonding *bond)
3918 switch (bond->params.xmit_policy) {
3919 case BOND_XMIT_POLICY_LAYER23:
3920 bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
3922 case BOND_XMIT_POLICY_LAYER34:
3923 bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
3925 case BOND_XMIT_POLICY_LAYER2:
3927 bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
3933 * Lookup the slave that corresponds to a qid
3935 static inline int bond_slave_override(struct bonding *bond,
3936 struct sk_buff *skb)
3938 struct slave *slave = NULL;
3939 struct slave *check_slave;
3942 if (!skb->queue_mapping)
3945 /* Find out if any slaves have the same mapping as this skb. */
3946 bond_for_each_slave_rcu(bond, check_slave) {
3947 if (check_slave->queue_id == skb->queue_mapping) {
3948 slave = check_slave;
3953 /* If the slave isn't UP, use default transmit policy. */
3954 if (slave && slave->queue_id && IS_UP(slave->dev) &&
3955 (slave->link == BOND_LINK_UP)) {
3956 res = bond_dev_queue_xmit(bond, skb, slave->dev);
3963 static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
3966 * This helper function exists to help dev_pick_tx get the correct
3967 * destination queue. Using a helper function skips a call to
3968 * skb_tx_hash and will put the skbs in the queue we expect on their
3969 * way down to the bonding driver.
3971 u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
3974 * Save the original txq to restore before passing to the driver
3976 qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
3978 if (unlikely(txq >= dev->real_num_tx_queues)) {
3980 txq -= dev->real_num_tx_queues;
3981 } while (txq >= dev->real_num_tx_queues);
3986 static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
3988 struct bonding *bond = netdev_priv(dev);
3990 if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
3991 if (!bond_slave_override(bond, skb))
3992 return NETDEV_TX_OK;
3995 switch (bond->params.mode) {
3996 case BOND_MODE_ROUNDROBIN:
3997 return bond_xmit_roundrobin(skb, dev);
3998 case BOND_MODE_ACTIVEBACKUP:
3999 return bond_xmit_activebackup(skb, dev);
4001 return bond_xmit_xor(skb, dev);
4002 case BOND_MODE_BROADCAST:
4003 return bond_xmit_broadcast(skb, dev);
4004 case BOND_MODE_8023AD:
4005 return bond_3ad_xmit_xor(skb, dev);
4008 return bond_alb_xmit(skb, dev);
4010 /* Should never happen, mode already checked */
4011 pr_err("%s: Error: Unknown bonding mode %d\n",
4012 dev->name, bond->params.mode);
4015 return NETDEV_TX_OK;
4019 static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
4021 struct bonding *bond = netdev_priv(dev);
4022 netdev_tx_t ret = NETDEV_TX_OK;
4025 * If we risk deadlock from transmitting this in the
4026 * netpoll path, tell netpoll to queue the frame for later tx
4028 if (is_netpoll_tx_blocked(dev))
4029 return NETDEV_TX_BUSY;
4032 if (!list_empty(&bond->slave_list))
4033 ret = __bond_start_xmit(skb, dev);
4042 * set bond mode specific net device operations
4044 void bond_set_mode_ops(struct bonding *bond, int mode)
4046 struct net_device *bond_dev = bond->dev;
4049 case BOND_MODE_ROUNDROBIN:
4051 case BOND_MODE_ACTIVEBACKUP:
4054 bond_set_xmit_hash_policy(bond);
4056 case BOND_MODE_BROADCAST:
4058 case BOND_MODE_8023AD:
4059 bond_set_xmit_hash_policy(bond);
4066 /* Should never happen, mode already checked */
4067 pr_err("%s: Error: Unknown bonding mode %d\n",
4068 bond_dev->name, mode);
4073 static int bond_ethtool_get_settings(struct net_device *bond_dev,
4074 struct ethtool_cmd *ecmd)
4076 struct bonding *bond = netdev_priv(bond_dev);
4077 unsigned long speed = 0;
4078 struct slave *slave;
4080 ecmd->duplex = DUPLEX_UNKNOWN;
4081 ecmd->port = PORT_OTHER;
4083 /* Since SLAVE_IS_OK returns false for all inactive or down slaves, we
4084 * do not need to check mode. Though link speed might not represent
4085 * the true receive or transmit bandwidth (not all modes are symmetric)
4086 * this is an accurate maximum.
4088 read_lock(&bond->lock);
4089 bond_for_each_slave(bond, slave) {
4090 if (SLAVE_IS_OK(slave)) {
4091 if (slave->speed != SPEED_UNKNOWN)
4092 speed += slave->speed;
4093 if (ecmd->duplex == DUPLEX_UNKNOWN &&
4094 slave->duplex != DUPLEX_UNKNOWN)
4095 ecmd->duplex = slave->duplex;
4098 ethtool_cmd_speed_set(ecmd, speed ? : SPEED_UNKNOWN);
4099 read_unlock(&bond->lock);
4104 static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
4105 struct ethtool_drvinfo *drvinfo)
4107 strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
4108 strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
4109 snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d",
4113 static const struct ethtool_ops bond_ethtool_ops = {
4114 .get_drvinfo = bond_ethtool_get_drvinfo,
4115 .get_settings = bond_ethtool_get_settings,
4116 .get_link = ethtool_op_get_link,
4119 static const struct net_device_ops bond_netdev_ops = {
4120 .ndo_init = bond_init,
4121 .ndo_uninit = bond_uninit,
4122 .ndo_open = bond_open,
4123 .ndo_stop = bond_close,
4124 .ndo_start_xmit = bond_start_xmit,
4125 .ndo_select_queue = bond_select_queue,
4126 .ndo_get_stats64 = bond_get_stats,
4127 .ndo_do_ioctl = bond_do_ioctl,
4128 .ndo_change_rx_flags = bond_change_rx_flags,
4129 .ndo_set_rx_mode = bond_set_rx_mode,
4130 .ndo_change_mtu = bond_change_mtu,
4131 .ndo_set_mac_address = bond_set_mac_address,
4132 .ndo_neigh_setup = bond_neigh_setup,
4133 .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
4134 .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
4135 #ifdef CONFIG_NET_POLL_CONTROLLER
4136 .ndo_netpoll_setup = bond_netpoll_setup,
4137 .ndo_netpoll_cleanup = bond_netpoll_cleanup,
4138 .ndo_poll_controller = bond_poll_controller,
4140 .ndo_add_slave = bond_enslave,
4141 .ndo_del_slave = bond_release,
4142 .ndo_fix_features = bond_fix_features,
4145 static const struct device_type bond_type = {
4149 static void bond_destructor(struct net_device *bond_dev)
4151 struct bonding *bond = netdev_priv(bond_dev);
4153 destroy_workqueue(bond->wq);
4154 free_netdev(bond_dev);
4157 static void bond_setup(struct net_device *bond_dev)
4159 struct bonding *bond = netdev_priv(bond_dev);
4161 /* initialize rwlocks */
4162 rwlock_init(&bond->lock);
4163 rwlock_init(&bond->curr_slave_lock);
4164 INIT_LIST_HEAD(&bond->slave_list);
4165 bond->params = bonding_defaults;
4167 /* Initialize pointers */
4168 bond->dev = bond_dev;
4169 INIT_LIST_HEAD(&bond->vlan_list);
4171 /* Initialize the device entry points */
4172 ether_setup(bond_dev);
4173 bond_dev->netdev_ops = &bond_netdev_ops;
4174 bond_dev->ethtool_ops = &bond_ethtool_ops;
4175 bond_set_mode_ops(bond, bond->params.mode);
4177 bond_dev->destructor = bond_destructor;
4179 SET_NETDEV_DEVTYPE(bond_dev, &bond_type);
4181 /* Initialize the device options */
4182 bond_dev->tx_queue_len = 0;
4183 bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
4184 bond_dev->priv_flags |= IFF_BONDING;
4185 bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
4187 /* At first, we block adding VLANs. That's the only way to
4188 * prevent problems that occur when adding VLANs over an
4189 * empty bond. The block will be removed once non-challenged
4190 * slaves are enslaved.
4192 bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
4194 /* don't acquire bond device's netif_tx_lock when
4196 bond_dev->features |= NETIF_F_LLTX;
4198 /* By default, we declare the bond to be fully
4199 * VLAN hardware accelerated capable. Special
4200 * care is taken in the various xmit functions
4201 * when there are slaves that are not hw accel
4205 bond_dev->hw_features = BOND_VLAN_FEATURES |
4206 NETIF_F_HW_VLAN_CTAG_TX |
4207 NETIF_F_HW_VLAN_CTAG_RX |
4208 NETIF_F_HW_VLAN_CTAG_FILTER;
4210 bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM);
4211 bond_dev->features |= bond_dev->hw_features;
4215 * Destroy a bonding device.
4216 * Must be under rtnl_lock when this function is called.
4218 static void bond_uninit(struct net_device *bond_dev)
4220 struct bonding *bond = netdev_priv(bond_dev);
4221 struct slave *slave, *tmp_slave;
4222 struct vlan_entry *vlan, *tmp;
4224 bond_netpoll_cleanup(bond_dev);
4226 /* Release the bonded slaves */
4227 list_for_each_entry_safe(slave, tmp_slave, &bond->slave_list, list)
4228 __bond_release_one(bond_dev, slave->dev, true);
4229 pr_info("%s: released all slaves\n", bond_dev->name);
4231 list_del(&bond->bond_list);
4233 bond_debug_unregister(bond);
4235 list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
4236 list_del(&vlan->vlan_list);
4241 /*------------------------- Module initialization ---------------------------*/
4244 * Convert string input module parms. Accept either the
4245 * number of the mode or its string name. A bit complicated because
4246 * some mode names are substrings of other names, and calls from sysfs
4247 * may have whitespace in the name (trailing newlines, for example).
4249 int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
4251 int modeint = -1, i, rv;
4252 char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
4254 for (p = (char *)buf; *p; p++)
4255 if (!(isdigit(*p) || isspace(*p)))
4259 rv = sscanf(buf, "%20s", modestr);
4261 rv = sscanf(buf, "%d", &modeint);
4266 for (i = 0; tbl[i].modename; i++) {
4267 if (modeint == tbl[i].mode)
4269 if (strcmp(modestr, tbl[i].modename) == 0)
4276 static int bond_check_params(struct bond_params *params)
4278 int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
4279 int arp_all_targets_value;
4282 * Convert string parameters.
4285 bond_mode = bond_parse_parm(mode, bond_mode_tbl);
4286 if (bond_mode == -1) {
4287 pr_err("Error: Invalid bonding mode \"%s\"\n",
4288 mode == NULL ? "NULL" : mode);
4293 if (xmit_hash_policy) {
4294 if ((bond_mode != BOND_MODE_XOR) &&
4295 (bond_mode != BOND_MODE_8023AD)) {
4296 pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
4297 bond_mode_name(bond_mode));
4299 xmit_hashtype = bond_parse_parm(xmit_hash_policy,
4301 if (xmit_hashtype == -1) {
4302 pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
4303 xmit_hash_policy == NULL ? "NULL" :
4311 if (bond_mode != BOND_MODE_8023AD) {
4312 pr_info("lacp_rate param is irrelevant in mode %s\n",
4313 bond_mode_name(bond_mode));
4315 lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
4316 if (lacp_fast == -1) {
4317 pr_err("Error: Invalid lacp rate \"%s\"\n",
4318 lacp_rate == NULL ? "NULL" : lacp_rate);
4325 params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
4326 if (params->ad_select == -1) {
4327 pr_err("Error: Invalid ad_select \"%s\"\n",
4328 ad_select == NULL ? "NULL" : ad_select);
4332 if (bond_mode != BOND_MODE_8023AD) {
4333 pr_warning("ad_select param only affects 802.3ad mode\n");
4336 params->ad_select = BOND_AD_STABLE;
4339 if (max_bonds < 0) {
4340 pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4341 max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
4342 max_bonds = BOND_DEFAULT_MAX_BONDS;
4346 pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
4347 miimon, INT_MAX, BOND_LINK_MON_INTERV);
4348 miimon = BOND_LINK_MON_INTERV;
4352 pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4357 if (downdelay < 0) {
4358 pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4359 downdelay, INT_MAX);
4363 if ((use_carrier != 0) && (use_carrier != 1)) {
4364 pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
4369 if (num_peer_notif < 0 || num_peer_notif > 255) {
4370 pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
4375 /* reset values for 802.3ad */
4376 if (bond_mode == BOND_MODE_8023AD) {
4378 pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
4379 pr_warning("Forcing miimon to 100msec\n");
4384 if (tx_queues < 1 || tx_queues > 255) {
4385 pr_warning("Warning: tx_queues (%d) should be between "
4386 "1 and 255, resetting to %d\n",
4387 tx_queues, BOND_DEFAULT_TX_QUEUES);
4388 tx_queues = BOND_DEFAULT_TX_QUEUES;
4391 if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
4392 pr_warning("Warning: all_slaves_active module parameter (%d), "
4393 "not of valid value (0/1), so it was set to "
4394 "0\n", all_slaves_active);
4395 all_slaves_active = 0;
4398 if (resend_igmp < 0 || resend_igmp > 255) {
4399 pr_warning("Warning: resend_igmp (%d) should be between "
4400 "0 and 255, resetting to %d\n",
4401 resend_igmp, BOND_DEFAULT_RESEND_IGMP);
4402 resend_igmp = BOND_DEFAULT_RESEND_IGMP;
4405 /* reset values for TLB/ALB */
4406 if ((bond_mode == BOND_MODE_TLB) ||
4407 (bond_mode == BOND_MODE_ALB)) {
4409 pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
4410 pr_warning("Forcing miimon to 100msec\n");
4415 if (bond_mode == BOND_MODE_ALB) {
4416 pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
4421 if (updelay || downdelay) {
4422 /* just warn the user the up/down delay will have
4423 * no effect since miimon is zero...
4425 pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
4426 updelay, downdelay);
4429 /* don't allow arp monitoring */
4431 pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
4432 miimon, arp_interval);
4436 if ((updelay % miimon) != 0) {
4437 pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
4439 (updelay / miimon) * miimon);
4444 if ((downdelay % miimon) != 0) {
4445 pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
4447 (downdelay / miimon) * miimon);
4450 downdelay /= miimon;
4453 if (arp_interval < 0) {
4454 pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n",
4455 arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
4456 arp_interval = BOND_LINK_ARP_INTERV;
4459 for (arp_ip_count = 0, i = 0;
4460 (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
4461 /* not complete check, but should be good enough to
4463 __be32 ip = in_aton(arp_ip_target[i]);
4464 if (!isdigit(arp_ip_target[i][0]) || ip == 0 ||
4465 ip == htonl(INADDR_BROADCAST)) {
4466 pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
4470 if (bond_get_targets_ip(arp_target, ip) == -1)
4471 arp_target[arp_ip_count++] = ip;
4473 pr_warning("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
4478 if (arp_interval && !arp_ip_count) {
4479 /* don't allow arping if no arp_ip_target given... */
4480 pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
4486 if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
4487 pr_err("arp_validate only supported in active-backup mode\n");
4490 if (!arp_interval) {
4491 pr_err("arp_validate requires arp_interval\n");
4495 arp_validate_value = bond_parse_parm(arp_validate,
4497 if (arp_validate_value == -1) {
4498 pr_err("Error: invalid arp_validate \"%s\"\n",
4499 arp_validate == NULL ? "NULL" : arp_validate);
4503 arp_validate_value = 0;
4505 arp_all_targets_value = 0;
4506 if (arp_all_targets) {
4507 arp_all_targets_value = bond_parse_parm(arp_all_targets,
4508 arp_all_targets_tbl);
4510 if (arp_all_targets_value == -1) {
4511 pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
4513 arp_all_targets_value = 0;
4518 pr_info("MII link monitoring set to %d ms\n", miimon);
4519 } else if (arp_interval) {
4520 pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
4522 arp_validate_tbl[arp_validate_value].modename,
4525 for (i = 0; i < arp_ip_count; i++)
4526 pr_info(" %s", arp_ip_target[i]);
4530 } else if (max_bonds) {
4531 /* miimon and arp_interval not set, we need one so things
4532 * work as expected, see bonding.txt for details
4534 pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
4537 if (primary && !USES_PRIMARY(bond_mode)) {
4538 /* currently, using a primary only makes sense
4539 * in active backup, TLB or ALB modes
4541 pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
4542 primary, bond_mode_name(bond_mode));
4546 if (primary && primary_reselect) {
4547 primary_reselect_value = bond_parse_parm(primary_reselect,
4549 if (primary_reselect_value == -1) {
4550 pr_err("Error: Invalid primary_reselect \"%s\"\n",
4552 NULL ? "NULL" : primary_reselect);
4556 primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
4559 if (fail_over_mac) {
4560 fail_over_mac_value = bond_parse_parm(fail_over_mac,
4562 if (fail_over_mac_value == -1) {
4563 pr_err("Error: invalid fail_over_mac \"%s\"\n",
4564 arp_validate == NULL ? "NULL" : arp_validate);
4568 if (bond_mode != BOND_MODE_ACTIVEBACKUP)
4569 pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
4571 fail_over_mac_value = BOND_FOM_NONE;
4574 /* fill params struct with the proper values */
4575 params->mode = bond_mode;
4576 params->xmit_policy = xmit_hashtype;
4577 params->miimon = miimon;
4578 params->num_peer_notif = num_peer_notif;
4579 params->arp_interval = arp_interval;
4580 params->arp_validate = arp_validate_value;
4581 params->arp_all_targets = arp_all_targets_value;
4582 params->updelay = updelay;
4583 params->downdelay = downdelay;
4584 params->use_carrier = use_carrier;
4585 params->lacp_fast = lacp_fast;
4586 params->primary[0] = 0;
4587 params->primary_reselect = primary_reselect_value;
4588 params->fail_over_mac = fail_over_mac_value;
4589 params->tx_queues = tx_queues;
4590 params->all_slaves_active = all_slaves_active;
4591 params->resend_igmp = resend_igmp;
4592 params->min_links = min_links;
4595 strncpy(params->primary, primary, IFNAMSIZ);
4596 params->primary[IFNAMSIZ - 1] = 0;
4599 memcpy(params->arp_targets, arp_target, sizeof(arp_target));
4604 static struct lock_class_key bonding_netdev_xmit_lock_key;
4605 static struct lock_class_key bonding_netdev_addr_lock_key;
4606 static struct lock_class_key bonding_tx_busylock_key;
4608 static void bond_set_lockdep_class_one(struct net_device *dev,
4609 struct netdev_queue *txq,
4612 lockdep_set_class(&txq->_xmit_lock,
4613 &bonding_netdev_xmit_lock_key);
4616 static void bond_set_lockdep_class(struct net_device *dev)
4618 lockdep_set_class(&dev->addr_list_lock,
4619 &bonding_netdev_addr_lock_key);
4620 netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
4621 dev->qdisc_tx_busylock = &bonding_tx_busylock_key;
4625 * Called from registration process
4627 static int bond_init(struct net_device *bond_dev)
4629 struct bonding *bond = netdev_priv(bond_dev);
4630 struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
4631 struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
4633 pr_debug("Begin bond_init for %s\n", bond_dev->name);
4636 * Initialize locks that may be required during
4637 * en/deslave operations. All of the bond_open work
4638 * (of which this is part) should really be moved to
4639 * a phase prior to dev_open
4641 spin_lock_init(&(bond_info->tx_hashtbl_lock));
4642 spin_lock_init(&(bond_info->rx_hashtbl_lock));
4644 bond->wq = create_singlethread_workqueue(bond_dev->name);
4648 bond_set_lockdep_class(bond_dev);
4650 list_add_tail(&bond->bond_list, &bn->dev_list);
4652 bond_prepare_sysfs_group(bond);
4654 bond_debug_register(bond);
4656 /* Ensure valid dev_addr */
4657 if (is_zero_ether_addr(bond_dev->dev_addr) &&
4658 bond_dev->addr_assign_type == NET_ADDR_PERM)
4659 eth_hw_addr_random(bond_dev);
4664 static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
4666 if (tb[IFLA_ADDRESS]) {
4667 if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
4669 if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
4670 return -EADDRNOTAVAIL;
4675 static unsigned int bond_get_num_tx_queues(void)
4680 static struct rtnl_link_ops bond_link_ops __read_mostly = {
4682 .priv_size = sizeof(struct bonding),
4683 .setup = bond_setup,
4684 .validate = bond_validate,
4685 .get_num_tx_queues = bond_get_num_tx_queues,
4686 .get_num_rx_queues = bond_get_num_tx_queues, /* Use the same number
4690 /* Create a new bond based on the specified name and bonding parameters.
4691 * If name is NULL, obtain a suitable "bond%d" name for us.
4692 * Caller must NOT hold rtnl_lock; we need to release it here before we
4693 * set up our sysfs entries.
4695 int bond_create(struct net *net, const char *name)
4697 struct net_device *bond_dev;
4702 bond_dev = alloc_netdev_mq(sizeof(struct bonding),
4703 name ? name : "bond%d",
4704 bond_setup, tx_queues);
4706 pr_err("%s: eek! can't alloc netdev!\n", name);
4711 dev_net_set(bond_dev, net);
4712 bond_dev->rtnl_link_ops = &bond_link_ops;
4714 res = register_netdevice(bond_dev);
4716 netif_carrier_off(bond_dev);
4720 bond_destructor(bond_dev);
4724 static int __net_init bond_net_init(struct net *net)
4726 struct bond_net *bn = net_generic(net, bond_net_id);
4729 INIT_LIST_HEAD(&bn->dev_list);
4731 bond_create_proc_dir(bn);
4732 bond_create_sysfs(bn);
4737 static void __net_exit bond_net_exit(struct net *net)
4739 struct bond_net *bn = net_generic(net, bond_net_id);
4740 struct bonding *bond, *tmp_bond;
4743 bond_destroy_sysfs(bn);
4744 bond_destroy_proc_dir(bn);
4746 /* Kill off any bonds created after unregistering bond rtnl ops */
4748 list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list)
4749 unregister_netdevice_queue(bond->dev, &list);
4750 unregister_netdevice_many(&list);
4754 static struct pernet_operations bond_net_ops = {
4755 .init = bond_net_init,
4756 .exit = bond_net_exit,
4758 .size = sizeof(struct bond_net),
4761 static int __init bonding_init(void)
4766 pr_info("%s", bond_version);
4768 res = bond_check_params(&bonding_defaults);
4772 res = register_pernet_subsys(&bond_net_ops);
4776 res = rtnl_link_register(&bond_link_ops);
4780 bond_create_debugfs();
4782 for (i = 0; i < max_bonds; i++) {
4783 res = bond_create(&init_net, NULL);
4788 register_netdevice_notifier(&bond_netdev_notifier);
4792 rtnl_link_unregister(&bond_link_ops);
4794 unregister_pernet_subsys(&bond_net_ops);
4799 static void __exit bonding_exit(void)
4801 unregister_netdevice_notifier(&bond_netdev_notifier);
4803 bond_destroy_debugfs();
4805 rtnl_link_unregister(&bond_link_ops);
4806 unregister_pernet_subsys(&bond_net_ops);
4808 #ifdef CONFIG_NET_POLL_CONTROLLER
4810 * Make sure we don't have an imbalance on our netpoll blocking
4812 WARN_ON(atomic_read(&netpoll_block_tx));
4816 module_init(bonding_init);
4817 module_exit(bonding_exit);
4818 MODULE_LICENSE("GPL");
4819 MODULE_VERSION(DRV_VERSION);
4820 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
4821 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
4822 MODULE_ALIAS_RTNL_LINK("bond");