Pileus Git - ~andy/linux/blob - drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/slab.h>
  28 #include <linux/delay.h>
  29 #include <linux/i2c.h>
  30 #include <linux/usb.h>
  31 #include <media/tuner.h>
  32 #include <media/msp3400.h>
  33 #include <media/saa7115.h>
  34 #include <media/tvp5150.h>
  35 #include <media/tvaudio.h>
  36 #include <media/mt9v011.h>
  37 #include <media/i2c-addr.h>
  38 #include <media/tveeprom.h>
  39 #include <media/v4l2-common.h>
  40 #include <media/v4l2-chip-ident.h>
  41
  42 #include "em28xx.h"
  43
  44 #define DRIVER_NAME         "em28xx"
  45
  46 static int tuner = -1;
  47 module_param(tuner, int, 0444);
  48 MODULE_PARM_DESC(tuner, "tuner type");
  49
  50 static unsigned int disable_ir;
  51 module_param(disable_ir, int, 0444);
  52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  53
  54 static unsigned int disable_usb_speed_check;
  55 module_param(disable_usb_speed_check, int, 0444);
  56 MODULE_PARM_DESC(disable_usb_speed_check,
  57                  "override min bandwidth requirement of 480M bps");
  58
  59 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
  60 module_param_array(card,  int, NULL, 0444);
  61 MODULE_PARM_DESC(card,     "card type");
  62
  63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
  64 static unsigned long em28xx_devused;
  65
  66 struct em28xx_hash_table {
  67         unsigned long hash;
  68         unsigned int  model;
  69         unsigned int  tuner;
  70 };
  71
  72 static void em28xx_pre_card_setup(struct em28xx *dev);
  73
  74 /*
  75  *  Reset sequences for analog/digital modes
  76  */
  77
  78 /* Reset for the most [analog] boards */
  79 static struct em28xx_reg_seq default_analog[] = {
  80         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  81         {       -1,             -1,     -1,             -1},
  82 };
  83
  84 /* Reset for the most [digital] boards */
  85 static struct em28xx_reg_seq default_digital[] = {
  86         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  87         {       -1,             -1,     -1,             -1},
  88 };
  89
  90 /* Board Hauppauge WinTV HVR 900 analog */
  91 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  92         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  93         {0x05,                  0xff,   0x10,           10},
  94         {  -1,                  -1,     -1,             -1},
  95 };
  96
  97 /* Board Hauppauge WinTV HVR 900 digital */
  98 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  99         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
 100         {EM2880_R04_GPO,        0x04,   0x0f,           10},
 101         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
 102         { -1,                   -1,     -1,             -1},
 103 };
 104
 105 /* Board Hauppauge WinTV HVR 900 (R2) digital */
 106 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
 107         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
 108         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
 109         { -1,                   -1,     -1,             -1},
 110 };
 111
 112 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 113 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 114         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
 115         {       -1,             -1,     -1,              -1},
 116 };
 117
 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 119
 120 /* Board  - EM2870 Kworld 355u
 121    Analog - No input analog */
 122
 123 /* Board - EM2882 Kworld 315U digital */
 124 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
 125         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 126         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 127         {EM2880_R04_GPO,        0x04,   0xff,           10},
 128         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 129         {EM28XX_R08_GPIO,       0x7e,   0xff,           10},
 130         {  -1,                  -1,     -1,             -1},
 131 };
 132
 133 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
 134         {EM2880_R04_GPO,        0x08,   0xff,           10},
 135         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 136         {EM2880_R04_GPO,        0x08,   0xff,           10},
 137         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 138         {  -1,                  -1,     -1,             -1},
 139 };
 140
 141 static struct em28xx_reg_seq kworld_330u_analog[] = {
 142         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 143         {EM2880_R04_GPO,        0x00,   0xff,           10},
 144         { -1,                   -1,     -1,             -1},
 145 };
 146
 147 static struct em28xx_reg_seq kworld_330u_digital[] = {
 148         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 149         {EM2880_R04_GPO,        0x08,   0xff,           10},
 150         { -1,                   -1,     -1,             -1},
 151 };
 152
 153 /* Evga inDtube
 154    GPIO0 - Enable digital power (s5h1409) - low to enable
 155    GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
 156    GPIO4 - xc3028 reset
 157    GOP3  - s5h1409 reset
 158  */
 159 static struct em28xx_reg_seq evga_indtube_analog[] = {
 160         {EM28XX_R08_GPIO,       0x79,   0xff,           60},
 161         {       -1,             -1,     -1,             -1},
 162 };
 163
 164 static struct em28xx_reg_seq evga_indtube_digital[] = {
 165         {EM28XX_R08_GPIO,       0x7a,   0xff,            1},
 166         {EM2880_R04_GPO,        0x04,   0xff,           10},
 167         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 168         { -1,                   -1,     -1,             -1},
 169 };
 170
 171 /*
 172  * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
 173  * EM_GPIO_0 - currently unknown
 174  * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
 175  * EM_GPIO_2 - currently unknown
 176  * EM_GPIO_3 - currently unknown
 177  * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
 178  * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
 179  * EM_GPIO_6 - currently unknown
 180  * EM_GPIO_7 - currently unknown
 181  */
 182 static struct em28xx_reg_seq kworld_a340_digital[] = {
 183         {EM28XX_R08_GPIO,       0x6d,           ~EM_GPIO_4,     10},
 184         { -1,                   -1,             -1,             -1},
 185 };
 186
 187 /* Pinnacle Hybrid Pro eb1a:2881 */
 188 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 189         {EM28XX_R08_GPIO,       0xfd,   ~EM_GPIO_4,     10},
 190         {       -1,             -1,     -1,             -1},
 191 };
 192
 193 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
 194         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 195         {EM2880_R04_GPO,        0x04,   0xff,          100},/* zl10353 reset */
 196         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 197         {       -1,             -1,     -1,             -1},
 198 };
 199
 200 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
 201         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 202         {EM2880_R04_GPO,        0x00,   0xff,           10},
 203         { -1,                   -1,     -1,             -1},
 204 };
 205
 206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
 207         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 208         {EM2880_R04_GPO,        0x08,   0xff,           10},
 209         { -1,                   -1,     -1,             -1},
 210 };
 211
 212 /* eb1a:2868 Reddo DVB-C USB TV Box
 213    GPIO4 - CU1216L NIM
 214    Other GPIOs seems to be don't care. */
 215 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
 216         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 217         {EM28XX_R08_GPIO,       0xde,   0xff,           10},
 218         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 219         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 220         {EM28XX_R08_GPIO,       0x7f,   0xff,           10},
 221         {EM28XX_R08_GPIO,       0x6f,   0xff,           10},
 222         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 223         {-1,                    -1,     -1,             -1},
 224 };
 225
 226 /* Callback for the most boards */
 227 static struct em28xx_reg_seq default_tuner_gpio[] = {
 228         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 229         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 230         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 231         {  -1,                  -1,             -1,             -1},
 232 };
 233
 234 /* Mute/unmute */
 235 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
 236         {EM28XX_R08_GPIO,       5,              7,              10},
 237         {  -1,                  -1,             -1,             -1},
 238 };
 239
 240 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
 241         {EM28XX_R08_GPIO,       4,              7,              10},
 242         {  -1,                  -1,             -1,             -1},
 243 };
 244
 245 static struct em28xx_reg_seq compro_mute_gpio[] = {
 246         {EM28XX_R08_GPIO,       6,              7,              10},
 247         {  -1,                  -1,             -1,             -1},
 248 };
 249
 250 /* Terratec AV350 */
 251 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
 252         {EM28XX_R08_GPIO,       0xff,   0x7f,           10},
 253         {       -1,             -1,     -1,             -1},
 254 };
 255
 256 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 257         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 258         {       -1,             -1,     -1,             -1},
 259 };
 260
 261 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 262         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 263         {EM28XX_R08_GPIO,       0x01,   0xf7,           10},
 264         {       -1,             -1,     -1,             -1},
 265 };
 266
 267 static struct em28xx_reg_seq vc211a_enable[] = {
 268         {EM28XX_R08_GPIO,       0xff,   0x07,           10},
 269         {EM28XX_R08_GPIO,       0xff,   0x0f,           10},
 270         {EM28XX_R08_GPIO,       0xff,   0x0b,           10},
 271         {       -1,             -1,     -1,             -1},
 272 };
 273
 274 static struct em28xx_reg_seq dikom_dk300_digital[] = {
 275         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 276         {EM2880_R04_GPO,        0x08,   0xff,           10},
 277         { -1,                   -1,     -1,             -1},
 278 };
 279
 280
 281 /* Reset for the most [digital] boards */
 282 static struct em28xx_reg_seq leadership_digital[] = {
 283         {EM2874_R80_GPIO,       0x70,   0xff,   10},
 284         {       -1,             -1,     -1,     -1},
 285 };
 286
 287 static struct em28xx_reg_seq leadership_reset[] = {
 288         {EM2874_R80_GPIO,       0xf0,   0xff,   10},
 289         {EM2874_R80_GPIO,       0xb0,   0xff,   10},
 290         {EM2874_R80_GPIO,       0xf0,   0xff,   10},
 291         {       -1,             -1,     -1,     -1},
 292 };
 293
 294 /* 2013:024f PCTV nanoStick T2 290e
 295  * GPIO_6 - demod reset
 296  * GPIO_7 - LED
 297  */
 298 static struct em28xx_reg_seq pctv_290e[] = {
 299         {EM2874_R80_GPIO,       0x00,   0xff,           80},
 300         {EM2874_R80_GPIO,       0x40,   0xff,           80}, /* GPIO_6 = 1 */
 301         {EM2874_R80_GPIO,       0xc0,   0xff,           80}, /* GPIO_7 = 1 */
 302         {-1,                    -1,     -1,             -1},
 303 };
 304
 305 #if 0
 306 static struct em28xx_reg_seq terratec_h5_gpio[] = {
 307         {EM28XX_R08_GPIO,       0xff,   0xff,   10},
 308         {EM2874_R80_GPIO,       0xf6,   0xff,   100},
 309         {EM2874_R80_GPIO,       0xf2,   0xff,   50},
 310         {EM2874_R80_GPIO,       0xf6,   0xff,   50},
 311         { -1,                   -1,     -1,     -1},
 312 };
 313
 314 static struct em28xx_reg_seq terratec_h5_digital[] = {
 315         {EM2874_R80_GPIO,       0xf6,   0xff,   10},
 316         {EM2874_R80_GPIO,       0xe6,   0xff,   100},
 317         {EM2874_R80_GPIO,       0xa6,   0xff,   10},
 318         { -1,                   -1,     -1,     -1},
 319 };
 320 #endif
 321
 322 /* 2013:024f PCTV DVB-S2 Stick 460e
 323  * GPIO_0 - POWER_ON
 324  * GPIO_1 - BOOST
 325  * GPIO_2 - VUV_LNB (red LED)
 326  * GPIO_3 - EXT_12V
 327  * GPIO_4 - INT_DEM (DEMOD GPIO_0)
 328  * GPIO_5 - INT_LNB
 329  * GPIO_6 - RESET_DEM
 330  * GPIO_7 - LED (green LED)
 331  */
 332 static struct em28xx_reg_seq pctv_460e[] = {
 333         {EM2874_R80_GPIO, 0x01, 0xff,  50},
 334         {0x0d,            0xff, 0xff,  50},
 335         {EM2874_R80_GPIO, 0x41, 0xff,  50}, /* GPIO_6=1 */
 336         {0x0d,            0x42, 0xff,  50},
 337         {EM2874_R80_GPIO, 0x61, 0xff,  50}, /* GPIO_5=1 */
 338         {             -1,   -1,   -1,  -1},
 339 };
 340
 341 #if 0
 342 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
 343         {EM2874_R80_GPIO,       0x6f,   0xff,   10},
 344         {EM2874_R80_GPIO,       0x4f,   0xff,   10}, /* xc5000 reset */
 345         {EM2874_R80_GPIO,       0x6f,   0xff,   10},
 346         {EM2874_R80_GPIO,       0x4f,   0xff,   10},
 347         { -1,                   -1,     -1,     -1},
 348 };
 349
 350 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
 351         {EM2874_R80_GPIO,       0xf6,   0xff,   10},
 352         {EM2874_R80_GPIO,       0xe6,   0xff,   100},
 353         {EM2874_R80_GPIO,       0xa6,   0xff,   10},
 354         { -1,                   -1,     -1,     -1},
 355 };
 356 #endif
 357
 358 /* 1b80:e425 MaxMedia UB425-TC
 359  * GPIO_6 - demod reset, 0=active
 360  * GPIO_7 - LED, 0=active
 361  */
 362 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
 363         {EM2874_R80_GPIO,  0x83,  0xff,  100},
 364         {EM2874_R80_GPIO,  0xc3,  0xff,  100}, /* GPIO_6 = 1 */
 365         {EM2874_R80_GPIO,  0x43,  0xff,  000}, /* GPIO_7 = 0 */
 366         {-1,                 -1,    -1,   -1},
 367 };
 368
 369 /* 2304:0242 PCTV QuatroStick (510e)
 370  * GPIO_2: decoder reset, 0=active
 371  * GPIO_4: decoder suspend, 0=active
 372  * GPIO_6: demod reset, 0=active
 373  * GPIO_7: LED, 1=active
 374  */
 375 static struct em28xx_reg_seq pctv_510e[] = {
 376         {EM2874_R80_GPIO, 0x10, 0xff, 100},
 377         {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
 378         {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 379         {             -1,   -1,   -1,  -1},
 380 };
 381
 382 /* 2013:0251 PCTV QuatroStick nano (520e)
 383  * GPIO_2: decoder reset, 0=active
 384  * GPIO_4: decoder suspend, 0=active
 385  * GPIO_6: demod reset, 0=active
 386  * GPIO_7: LED, 1=active
 387  */
 388 static struct em28xx_reg_seq pctv_520e[] = {
 389         {EM2874_R80_GPIO, 0x10, 0xff, 100},
 390         {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
 391         {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 392         {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
 393         {             -1,   -1,   -1,  -1},
 394 };
 395
 396 /*
 397  *  Board definitions
 398  */
 399 struct em28xx_board em28xx_boards[] = {
 400         [EM2750_BOARD_UNKNOWN] = {
 401                 .name          = "EM2710/EM2750/EM2751 webcam grabber",
 402                 .xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
 403                 .tuner_type    = TUNER_ABSENT,
 404                 .is_webcam     = 1,
 405                 .input         = { {
 406                         .type     = EM28XX_VMUX_COMPOSITE1,
 407                         .vmux     = 0,
 408                         .amux     = EM28XX_AMUX_VIDEO,
 409                         .gpio     = silvercrest_reg_seq,
 410                 } },
 411         },
 412         [EM2800_BOARD_UNKNOWN] = {
 413                 .name         = "Unknown EM2800 video grabber",
 414                 .is_em2800    = 1,
 415                 .tda9887_conf = TDA9887_PRESENT,
 416                 .decoder      = EM28XX_SAA711X,
 417                 .tuner_type   = TUNER_ABSENT,
 418                 .input        = { {
 419                         .type     = EM28XX_VMUX_COMPOSITE1,
 420                         .vmux     = SAA7115_COMPOSITE0,
 421                         .amux     = EM28XX_AMUX_LINE_IN,
 422                 }, {
 423                         .type     = EM28XX_VMUX_SVIDEO,
 424                         .vmux     = SAA7115_SVIDEO3,
 425                         .amux     = EM28XX_AMUX_LINE_IN,
 426                 } },
 427         },
 428         [EM2820_BOARD_UNKNOWN] = {
 429                 .name          = "Unknown EM2750/28xx video grabber",
 430                 .tuner_type    = TUNER_ABSENT,
 431                 .is_webcam     = 1,     /* To enable sensor probe */
 432         },
 433         [EM2750_BOARD_DLCW_130] = {
 434                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 435                 .name          = "Huaqi DLCW-130",
 436                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 437                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 438                 .tuner_type    = TUNER_ABSENT,
 439                 .is_webcam     = 1,
 440                 .input         = { {
 441                         .type     = EM28XX_VMUX_COMPOSITE1,
 442                         .vmux     = 0,
 443                         .amux     = EM28XX_AMUX_VIDEO,
 444                 } },
 445         },
 446         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 447                 .name         = "Kworld PVR TV 2800 RF",
 448                 .tuner_type   = TUNER_TEMIC_PAL,
 449                 .tda9887_conf = TDA9887_PRESENT,
 450                 .decoder      = EM28XX_SAA711X,
 451                 .input        = { {
 452                         .type     = EM28XX_VMUX_COMPOSITE1,
 453                         .vmux     = SAA7115_COMPOSITE0,
 454                         .amux     = EM28XX_AMUX_LINE_IN,
 455                 }, {
 456                         .type     = EM28XX_VMUX_SVIDEO,
 457                         .vmux     = SAA7115_SVIDEO3,
 458                         .amux     = EM28XX_AMUX_LINE_IN,
 459                 } },
 460         },
 461         [EM2820_BOARD_GADMEI_TVR200] = {
 462                 .name         = "Gadmei TVR200",
 463                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 464                 .tda9887_conf = TDA9887_PRESENT,
 465                 .decoder      = EM28XX_SAA711X,
 466                 .input        = { {
 467                         .type     = EM28XX_VMUX_TELEVISION,
 468                         .vmux     = SAA7115_COMPOSITE2,
 469                         .amux     = EM28XX_AMUX_LINE_IN,
 470                 }, {
 471                         .type     = EM28XX_VMUX_COMPOSITE1,
 472                         .vmux     = SAA7115_COMPOSITE0,
 473                         .amux     = EM28XX_AMUX_LINE_IN,
 474                 }, {
 475                         .type     = EM28XX_VMUX_SVIDEO,
 476                         .vmux     = SAA7115_SVIDEO3,
 477                         .amux     = EM28XX_AMUX_LINE_IN,
 478                 } },
 479         },
 480         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 481                 .name         = "Terratec Cinergy 250 USB",
 482                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 483                 .has_ir_i2c   = 1,
 484                 .tda9887_conf = TDA9887_PRESENT,
 485                 .decoder      = EM28XX_SAA711X,
 486                 .input        = { {
 487                         .type     = EM28XX_VMUX_TELEVISION,
 488                         .vmux     = SAA7115_COMPOSITE2,
 489                         .amux     = EM28XX_AMUX_LINE_IN,
 490                 }, {
 491                         .type     = EM28XX_VMUX_COMPOSITE1,
 492                         .vmux     = SAA7115_COMPOSITE0,
 493                         .amux     = EM28XX_AMUX_LINE_IN,
 494                 }, {
 495                         .type     = EM28XX_VMUX_SVIDEO,
 496                         .vmux     = SAA7115_SVIDEO3,
 497                         .amux     = EM28XX_AMUX_LINE_IN,
 498                 } },
 499         },
 500         [EM2820_BOARD_PINNACLE_USB_2] = {
 501                 .name         = "Pinnacle PCTV USB 2",
 502                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 503                 .has_ir_i2c   = 1,
 504                 .tda9887_conf = TDA9887_PRESENT,
 505                 .decoder      = EM28XX_SAA711X,
 506                 .input        = { {
 507                         .type     = EM28XX_VMUX_TELEVISION,
 508                         .vmux     = SAA7115_COMPOSITE2,
 509                         .amux     = EM28XX_AMUX_VIDEO,
 510                 }, {
 511                         .type     = EM28XX_VMUX_COMPOSITE1,
 512                         .vmux     = SAA7115_COMPOSITE0,
 513                         .amux     = EM28XX_AMUX_LINE_IN,
 514                 }, {
 515                         .type     = EM28XX_VMUX_SVIDEO,
 516                         .vmux     = SAA7115_SVIDEO3,
 517                         .amux     = EM28XX_AMUX_LINE_IN,
 518                 } },
 519         },
 520         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 521                 .name         = "Hauppauge WinTV USB 2",
 522                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 523                 .tda9887_conf = TDA9887_PRESENT |
 524                                 TDA9887_PORT1_ACTIVE |
 525                                 TDA9887_PORT2_ACTIVE,
 526                 .decoder      = EM28XX_TVP5150,
 527                 .has_msp34xx  = 1,
 528                 .has_ir_i2c   = 1,
 529                 .input        = { {
 530                         .type     = EM28XX_VMUX_TELEVISION,
 531                         .vmux     = TVP5150_COMPOSITE0,
 532                         .amux     = MSP_INPUT_DEFAULT,
 533                 }, {
 534                         .type     = EM28XX_VMUX_SVIDEO,
 535                         .vmux     = TVP5150_SVIDEO,
 536                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 537                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 538                 } },
 539         },
 540         [EM2820_BOARD_DLINK_USB_TV] = {
 541                 .name         = "D-Link DUB-T210 TV Tuner",
 542                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 543                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 544                 .tda9887_conf = TDA9887_PRESENT,
 545                 .decoder      = EM28XX_SAA711X,
 546                 .input        = { {
 547                         .type     = EM28XX_VMUX_TELEVISION,
 548                         .vmux     = SAA7115_COMPOSITE2,
 549                         .amux     = EM28XX_AMUX_LINE_IN,
 550                 }, {
 551                         .type     = EM28XX_VMUX_COMPOSITE1,
 552                         .vmux     = SAA7115_COMPOSITE0,
 553                         .amux     = EM28XX_AMUX_LINE_IN,
 554                 }, {
 555                         .type     = EM28XX_VMUX_SVIDEO,
 556                         .vmux     = SAA7115_SVIDEO3,
 557                         .amux     = EM28XX_AMUX_LINE_IN,
 558                 } },
 559         },
 560         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 561                 .name         = "Hercules Smart TV USB 2.0",
 562                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 563                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 564                 .tda9887_conf = TDA9887_PRESENT,
 565                 .decoder      = EM28XX_SAA711X,
 566                 .input        = { {
 567                         .type     = EM28XX_VMUX_TELEVISION,
 568                         .vmux     = SAA7115_COMPOSITE2,
 569                         .amux     = EM28XX_AMUX_LINE_IN,
 570                 }, {
 571                         .type     = EM28XX_VMUX_COMPOSITE1,
 572                         .vmux     = SAA7115_COMPOSITE0,
 573                         .amux     = EM28XX_AMUX_LINE_IN,
 574                 }, {
 575                         .type     = EM28XX_VMUX_SVIDEO,
 576                         .vmux     = SAA7115_SVIDEO3,
 577                         .amux     = EM28XX_AMUX_LINE_IN,
 578                 } },
 579         },
 580         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 581                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 582                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 583                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 584                 .tda9887_conf = TDA9887_PRESENT,
 585                 .decoder      = EM28XX_SAA711X,
 586                 .input        = { {
 587                         .type     = EM28XX_VMUX_TELEVISION,
 588                         .vmux     = SAA7115_COMPOSITE2,
 589                         .amux     = EM28XX_AMUX_VIDEO,
 590                 }, {
 591                         .type     = EM28XX_VMUX_COMPOSITE1,
 592                         .vmux     = SAA7115_COMPOSITE0,
 593                         .amux     = EM28XX_AMUX_LINE_IN,
 594                 }, {
 595                         .type     = EM28XX_VMUX_SVIDEO,
 596                         .vmux     = SAA7115_SVIDEO3,
 597                         .amux     = EM28XX_AMUX_LINE_IN,
 598                 } },
 599         },
 600         [EM2820_BOARD_GADMEI_UTV310] = {
 601                 .name         = "Gadmei UTV310",
 602                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 603                 .tuner_type   = TUNER_TNF_5335MF,
 604                 .tda9887_conf = TDA9887_PRESENT,
 605                 .decoder      = EM28XX_SAA711X,
 606                 .input        = { {
 607                         .type     = EM28XX_VMUX_TELEVISION,
 608                         .vmux     = SAA7115_COMPOSITE1,
 609                         .amux     = EM28XX_AMUX_LINE_IN,
 610                 }, {
 611                         .type     = EM28XX_VMUX_COMPOSITE1,
 612                         .vmux     = SAA7115_COMPOSITE0,
 613                         .amux     = EM28XX_AMUX_LINE_IN,
 614                 }, {
 615                         .type     = EM28XX_VMUX_SVIDEO,
 616                         .vmux     = SAA7115_SVIDEO3,
 617                         .amux     = EM28XX_AMUX_LINE_IN,
 618                 } },
 619         },
 620         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 621                 .name         = "Leadtek Winfast USB II Deluxe",
 622                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 623                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 624                 .has_ir_i2c   = 1,
 625                 .tvaudio_addr = 0x58,
 626                 .tda9887_conf = TDA9887_PRESENT |
 627                                 TDA9887_PORT2_ACTIVE |
 628                                 TDA9887_QSS,
 629                 .decoder      = EM28XX_SAA711X,
 630                 .adecoder     = EM28XX_TVAUDIO,
 631                 .input        = { {
 632                         .type     = EM28XX_VMUX_TELEVISION,
 633                         .vmux     = SAA7115_COMPOSITE4,
 634                         .amux     = EM28XX_AMUX_AUX,
 635                 }, {
 636                         .type     = EM28XX_VMUX_COMPOSITE1,
 637                         .vmux     = SAA7115_COMPOSITE5,
 638                         .amux     = EM28XX_AMUX_LINE_IN,
 639                 }, {
 640                         .type     = EM28XX_VMUX_SVIDEO,
 641                         .vmux     = SAA7115_SVIDEO3,
 642                         .amux     = EM28XX_AMUX_LINE_IN,
 643                 } },
 644                         .radio    = {
 645                         .type     = EM28XX_RADIO,
 646                         .amux     = EM28XX_AMUX_AUX,
 647                         }
 648         },
 649         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 650                 .name         = "Videology 20K14XUSB USB2.0",
 651                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 652                 .tuner_type   = TUNER_ABSENT,
 653                 .is_webcam    = 1,
 654                 .input        = { {
 655                         .type     = EM28XX_VMUX_COMPOSITE1,
 656                         .vmux     = 0,
 657                         .amux     = EM28XX_AMUX_VIDEO,
 658                 } },
 659         },
 660         [EM2820_BOARD_SILVERCREST_WEBCAM] = {
 661                 .name         = "Silvercrest Webcam 1.3mpix",
 662                 .tuner_type   = TUNER_ABSENT,
 663                 .is_webcam    = 1,
 664                 .input        = { {
 665                         .type     = EM28XX_VMUX_COMPOSITE1,
 666                         .vmux     = 0,
 667                         .amux     = EM28XX_AMUX_VIDEO,
 668                         .gpio     = silvercrest_reg_seq,
 669                 } },
 670         },
 671         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 672                 .name         = "Supercomp USB 2.0 TV",
 673                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 674                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 675                 .tda9887_conf = TDA9887_PRESENT |
 676                                 TDA9887_PORT1_ACTIVE |
 677                                 TDA9887_PORT2_ACTIVE,
 678                 .decoder      = EM28XX_SAA711X,
 679                 .input        = { {
 680                         .type     = EM28XX_VMUX_TELEVISION,
 681                         .vmux     = SAA7115_COMPOSITE2,
 682                         .amux     = EM28XX_AMUX_LINE_IN,
 683                 }, {
 684                         .type     = EM28XX_VMUX_COMPOSITE1,
 685                         .vmux     = SAA7115_COMPOSITE0,
 686                         .amux     = EM28XX_AMUX_VIDEO,
 687                 }, {
 688                         .type     = EM28XX_VMUX_SVIDEO,
 689                         .vmux     = SAA7115_SVIDEO3,
 690                         .amux     = EM28XX_AMUX_LINE_IN,
 691                 } },
 692         },
 693         [EM2821_BOARD_USBGEAR_VD204] = {
 694                 .name         = "Usbgear VD204v9",
 695                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 696                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 697                 .decoder      = EM28XX_SAA711X,
 698                 .input        = { {
 699                         .type  = EM28XX_VMUX_COMPOSITE1,
 700                         .vmux  = SAA7115_COMPOSITE0,
 701                         .amux  = EM28XX_AMUX_LINE_IN,
 702                 }, {
 703                         .type  = EM28XX_VMUX_SVIDEO,
 704                         .vmux  = SAA7115_SVIDEO3,
 705                         .amux  = EM28XX_AMUX_LINE_IN,
 706                 } },
 707         },
 708         [EM2860_BOARD_NETGMBH_CAM] = {
 709                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 710                 .name         = "NetGMBH Cam",
 711                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 712                 .tuner_type   = TUNER_ABSENT,
 713                 .is_webcam    = 1,
 714                 .input        = { {
 715                         .type     = EM28XX_VMUX_COMPOSITE1,
 716                         .vmux     = 0,
 717                         .amux     = EM28XX_AMUX_VIDEO,
 718                 } },
 719         },
 720         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 721                 .name         = "Typhoon DVD Maker",
 722                 .decoder      = EM28XX_SAA711X,
 723                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 724                 .input        = { {
 725                         .type  = EM28XX_VMUX_COMPOSITE1,
 726                         .vmux  = SAA7115_COMPOSITE0,
 727                         .amux  = EM28XX_AMUX_LINE_IN,
 728                 }, {
 729                         .type  = EM28XX_VMUX_SVIDEO,
 730                         .vmux  = SAA7115_SVIDEO3,
 731                         .amux  = EM28XX_AMUX_LINE_IN,
 732                 } },
 733         },
 734         [EM2860_BOARD_GADMEI_UTV330] = {
 735                 .name         = "Gadmei UTV330",
 736                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 737                 .tuner_type   = TUNER_TNF_5335MF,
 738                 .tda9887_conf = TDA9887_PRESENT,
 739                 .decoder      = EM28XX_SAA711X,
 740                 .input        = { {
 741                         .type     = EM28XX_VMUX_TELEVISION,
 742                         .vmux     = SAA7115_COMPOSITE2,
 743                         .amux     = EM28XX_AMUX_VIDEO,
 744                 }, {
 745                         .type     = EM28XX_VMUX_COMPOSITE1,
 746                         .vmux     = SAA7115_COMPOSITE0,
 747                         .amux     = EM28XX_AMUX_LINE_IN,
 748                 }, {
 749                         .type     = EM28XX_VMUX_SVIDEO,
 750                         .vmux     = SAA7115_SVIDEO3,
 751                         .amux     = EM28XX_AMUX_LINE_IN,
 752                 } },
 753         },
 754         [EM2861_BOARD_GADMEI_UTV330PLUS] = {
 755                 .name         = "Gadmei UTV330+",
 756                 .tuner_type   = TUNER_TNF_5335MF,
 757                 .tda9887_conf = TDA9887_PRESENT,
 758                 .ir_codes     = RC_MAP_GADMEI_RM008Z,
 759                 .decoder      = EM28XX_SAA711X,
 760                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 761                 .input        = { {
 762                         .type     = EM28XX_VMUX_TELEVISION,
 763                         .vmux     = SAA7115_COMPOSITE2,
 764                         .amux     = EM28XX_AMUX_VIDEO,
 765                 }, {
 766                         .type     = EM28XX_VMUX_COMPOSITE1,
 767                         .vmux     = SAA7115_COMPOSITE0,
 768                         .amux     = EM28XX_AMUX_LINE_IN,
 769                 }, {
 770                         .type     = EM28XX_VMUX_SVIDEO,
 771                         .vmux     = SAA7115_SVIDEO3,
 772                         .amux     = EM28XX_AMUX_LINE_IN,
 773                 } },
 774         },
 775         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 776                 .name         = "Terratec Cinergy A Hybrid XS",
 777                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 778                 .tuner_type   = TUNER_XC2028,
 779                 .tuner_gpio   = default_tuner_gpio,
 780                 .decoder      = EM28XX_TVP5150,
 781
 782                 .input        = { {
 783                         .type     = EM28XX_VMUX_TELEVISION,
 784                         .vmux     = TVP5150_COMPOSITE0,
 785                         .amux     = EM28XX_AMUX_VIDEO,
 786                         .gpio     = hauppauge_wintv_hvr_900_analog,
 787                 }, {
 788                         .type     = EM28XX_VMUX_COMPOSITE1,
 789                         .vmux     = TVP5150_COMPOSITE1,
 790                         .amux     = EM28XX_AMUX_LINE_IN,
 791                         .gpio     = hauppauge_wintv_hvr_900_analog,
 792                 }, {
 793                         .type     = EM28XX_VMUX_SVIDEO,
 794                         .vmux     = TVP5150_SVIDEO,
 795                         .amux     = EM28XX_AMUX_LINE_IN,
 796                         .gpio     = hauppauge_wintv_hvr_900_analog,
 797                 } },
 798         },
 799         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 800                 .name         = "KWorld PVRTV 300U",
 801                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 802                 .tuner_type   = TUNER_XC2028,
 803                 .tuner_gpio   = default_tuner_gpio,
 804                 .decoder      = EM28XX_TVP5150,
 805                 .input        = { {
 806                         .type     = EM28XX_VMUX_TELEVISION,
 807                         .vmux     = TVP5150_COMPOSITE0,
 808                         .amux     = EM28XX_AMUX_VIDEO,
 809                 }, {
 810                         .type     = EM28XX_VMUX_COMPOSITE1,
 811                         .vmux     = TVP5150_COMPOSITE1,
 812                         .amux     = EM28XX_AMUX_LINE_IN,
 813                 }, {
 814                         .type     = EM28XX_VMUX_SVIDEO,
 815                         .vmux     = TVP5150_SVIDEO,
 816                         .amux     = EM28XX_AMUX_LINE_IN,
 817                 } },
 818         },
 819         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 820                 .name          = "Yakumo MovieMixer",
 821                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 822                 .decoder       = EM28XX_TVP5150,
 823                 .input         = { {
 824                         .type     = EM28XX_VMUX_TELEVISION,
 825                         .vmux     = TVP5150_COMPOSITE0,
 826                         .amux     = EM28XX_AMUX_VIDEO,
 827                 }, {
 828                         .type     = EM28XX_VMUX_COMPOSITE1,
 829                         .vmux     = TVP5150_COMPOSITE1,
 830                         .amux     = EM28XX_AMUX_LINE_IN,
 831                 }, {
 832                         .type     = EM28XX_VMUX_SVIDEO,
 833                         .vmux     = TVP5150_SVIDEO,
 834                         .amux     = EM28XX_AMUX_LINE_IN,
 835                 } },
 836         },
 837         [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
 838                 .name          = "EM2860/TVP5150 Reference Design",
 839                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 840                 .decoder       = EM28XX_TVP5150,
 841                 .input         = { {
 842                         .type     = EM28XX_VMUX_COMPOSITE1,
 843                         .vmux     = TVP5150_COMPOSITE1,
 844                         .amux     = EM28XX_AMUX_LINE_IN,
 845                 }, {
 846                         .type     = EM28XX_VMUX_SVIDEO,
 847                         .vmux     = TVP5150_SVIDEO,
 848                         .amux     = EM28XX_AMUX_LINE_IN,
 849                 } },
 850         },
 851         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 852                 .name         = "Plextor ConvertX PX-TV100U",
 853                 .tuner_type   = TUNER_TNF_5335MF,
 854                 .xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
 855                                 EM28XX_XCLK_FREQUENCY_12MHZ,
 856                 .tda9887_conf = TDA9887_PRESENT,
 857                 .decoder      = EM28XX_TVP5150,
 858                 .has_msp34xx  = 1,
 859                 .input        = { {
 860                         .type     = EM28XX_VMUX_TELEVISION,
 861                         .vmux     = TVP5150_COMPOSITE0,
 862                         .amux     = EM28XX_AMUX_LINE_IN,
 863                         .gpio     = pinnacle_hybrid_pro_analog,
 864                 }, {
 865                         .type     = EM28XX_VMUX_COMPOSITE1,
 866                         .vmux     = TVP5150_COMPOSITE1,
 867                         .amux     = EM28XX_AMUX_LINE_IN,
 868                         .gpio     = pinnacle_hybrid_pro_analog,
 869                 }, {
 870                         .type     = EM28XX_VMUX_SVIDEO,
 871                         .vmux     = TVP5150_SVIDEO,
 872                         .amux     = EM28XX_AMUX_LINE_IN,
 873                         .gpio     = pinnacle_hybrid_pro_analog,
 874                 } },
 875         },
 876
 877         /* Those boards with em2870 are DVB Only*/
 878
 879         [EM2870_BOARD_TERRATEC_XS] = {
 880                 .name         = "Terratec Cinergy T XS",
 881                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 882                 .tuner_type   = TUNER_XC2028,
 883                 .tuner_gpio   = default_tuner_gpio,
 884         },
 885         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 886                 .name         = "Terratec Cinergy T XS (MT2060)",
 887                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 888                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 889         },
 890         [EM2870_BOARD_KWORLD_350U] = {
 891                 .name         = "Kworld 350 U DVB-T",
 892                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 893                 .tuner_type   = TUNER_XC2028,
 894                 .tuner_gpio   = default_tuner_gpio,
 895         },
 896         [EM2870_BOARD_KWORLD_355U] = {
 897                 .name         = "Kworld 355 U DVB-T",
 898                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 899                 .tuner_type   = TUNER_ABSENT,
 900                 .tuner_gpio   = default_tuner_gpio,
 901                 .has_dvb      = 1,
 902                 .dvb_gpio     = default_digital,
 903         },
 904         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 905                 .name         = "Pinnacle PCTV DVB-T",
 906                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 907                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 908                 /* djh - I have serious doubts this is right... */
 909                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 910                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 911         },
 912         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 913                 .name         = "Compro, VideoMate U3",
 914                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 915                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 916         },
 917
 918         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 919                 .name         = "Terratec Hybrid XS Secam",
 920                 .has_msp34xx  = 1,
 921                 .tuner_type   = TUNER_XC2028,
 922                 .tuner_gpio   = default_tuner_gpio,
 923                 .decoder      = EM28XX_TVP5150,
 924                 .has_dvb      = 1,
 925                 .dvb_gpio     = terratec_cinergy_USB_XS_FR_digital,
 926                 .input        = { {
 927                         .type     = EM28XX_VMUX_TELEVISION,
 928                         .vmux     = TVP5150_COMPOSITE0,
 929                         .amux     = EM28XX_AMUX_VIDEO,
 930                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 931                 }, {
 932                         .type     = EM28XX_VMUX_COMPOSITE1,
 933                         .vmux     = TVP5150_COMPOSITE1,
 934                         .amux     = EM28XX_AMUX_LINE_IN,
 935                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 936                 }, {
 937                         .type     = EM28XX_VMUX_SVIDEO,
 938                         .vmux     = TVP5150_SVIDEO,
 939                         .amux     = EM28XX_AMUX_LINE_IN,
 940                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 941                 } },
 942         },
 943         [EM2884_BOARD_TERRATEC_H5] = {
 944                 .name         = "Terratec Cinergy H5",
 945                 .has_dvb      = 1,
 946 #if 0
 947                 .tuner_type   = TUNER_PHILIPS_TDA8290,
 948                 .tuner_addr   = 0x41,
 949                 .dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
 950                 .tuner_gpio   = terratec_h5_gpio,
 951 #else
 952                 .tuner_type   = TUNER_ABSENT,
 953 #endif
 954                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 955                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 956                                 EM28XX_I2C_FREQ_400_KHZ,
 957         },
 958         [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
 959                 .name         = "Hauppauge WinTV HVR 930C",
 960                 .has_dvb      = 1,
 961 #if 0 /* FIXME: Add analog support */
 962                 .tuner_type   = TUNER_XC5000,
 963                 .tuner_addr   = 0x41,
 964                 .dvb_gpio     = hauppauge_930c_digital,
 965                 .tuner_gpio   = hauppauge_930c_gpio,
 966 #else
 967                 .tuner_type   = TUNER_ABSENT,
 968 #endif
 969                 .ir_codes     = RC_MAP_HAUPPAUGE,
 970                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 971                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 972                                 EM28XX_I2C_FREQ_400_KHZ,
 973         },
 974         [EM2884_BOARD_CINERGY_HTC_STICK] = {
 975                 .name         = "Terratec Cinergy HTC Stick",
 976                 .has_dvb      = 1,
 977 #if 0
 978                 .tuner_type   = TUNER_PHILIPS_TDA8290,
 979                 .tuner_addr   = 0x41,
 980                 .dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
 981                 .tuner_gpio   = terratec_h5_gpio,
 982 #endif
 983                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 984                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 985                                 EM28XX_I2C_FREQ_400_KHZ,
 986         },
 987         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 988                 .name         = "Hauppauge WinTV HVR 900",
 989                 .tda9887_conf = TDA9887_PRESENT,
 990                 .tuner_type   = TUNER_XC2028,
 991                 .tuner_gpio   = default_tuner_gpio,
 992                 .mts_firmware = 1,
 993                 .has_dvb      = 1,
 994                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 995                 .ir_codes     = RC_MAP_HAUPPAUGE,
 996                 .decoder      = EM28XX_TVP5150,
 997                 .input        = { {
 998                         .type     = EM28XX_VMUX_TELEVISION,
 999                         .vmux     = TVP5150_COMPOSITE0,
1000                         .amux     = EM28XX_AMUX_VIDEO,
1001                         .gpio     = hauppauge_wintv_hvr_900_analog,
1002                 }, {
1003                         .type     = EM28XX_VMUX_COMPOSITE1,
1004                         .vmux     = TVP5150_COMPOSITE1,
1005                         .amux     = EM28XX_AMUX_LINE_IN,
1006                         .gpio     = hauppauge_wintv_hvr_900_analog,
1007                 }, {
1008                         .type     = EM28XX_VMUX_SVIDEO,
1009                         .vmux     = TVP5150_SVIDEO,
1010                         .amux     = EM28XX_AMUX_LINE_IN,
1011                         .gpio     = hauppauge_wintv_hvr_900_analog,
1012                 } },
1013         },
1014         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1015                 .name         = "Hauppauge WinTV HVR 900 (R2)",
1016                 .tda9887_conf = TDA9887_PRESENT,
1017                 .tuner_type   = TUNER_XC2028,
1018                 .tuner_gpio   = default_tuner_gpio,
1019                 .mts_firmware = 1,
1020                 .has_dvb      = 1,
1021                 .dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1022                 .ir_codes     = RC_MAP_HAUPPAUGE,
1023                 .decoder      = EM28XX_TVP5150,
1024                 .input        = { {
1025                         .type     = EM28XX_VMUX_TELEVISION,
1026                         .vmux     = TVP5150_COMPOSITE0,
1027                         .amux     = EM28XX_AMUX_VIDEO,
1028                         .gpio     = hauppauge_wintv_hvr_900_analog,
1029                 }, {
1030                         .type     = EM28XX_VMUX_COMPOSITE1,
1031                         .vmux     = TVP5150_COMPOSITE1,
1032                         .amux     = EM28XX_AMUX_LINE_IN,
1033                         .gpio     = hauppauge_wintv_hvr_900_analog,
1034                 }, {
1035                         .type     = EM28XX_VMUX_SVIDEO,
1036                         .vmux     = TVP5150_SVIDEO,
1037                         .amux     = EM28XX_AMUX_LINE_IN,
1038                         .gpio     = hauppauge_wintv_hvr_900_analog,
1039                 } },
1040         },
1041         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1042                 .name           = "Hauppauge WinTV HVR 850",
1043                 .tuner_type     = TUNER_XC2028,
1044                 .tuner_gpio     = default_tuner_gpio,
1045                 .mts_firmware   = 1,
1046                 .has_dvb        = 1,
1047                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1048                 .ir_codes       = RC_MAP_HAUPPAUGE,
1049                 .decoder        = EM28XX_TVP5150,
1050                 .input          = { {
1051                         .type     = EM28XX_VMUX_TELEVISION,
1052                         .vmux     = TVP5150_COMPOSITE0,
1053                         .amux     = EM28XX_AMUX_VIDEO,
1054                         .gpio     = hauppauge_wintv_hvr_900_analog,
1055                 }, {
1056                         .type     = EM28XX_VMUX_COMPOSITE1,
1057                         .vmux     = TVP5150_COMPOSITE1,
1058                         .amux     = EM28XX_AMUX_LINE_IN,
1059                         .gpio     = hauppauge_wintv_hvr_900_analog,
1060                 }, {
1061                         .type     = EM28XX_VMUX_SVIDEO,
1062                         .vmux     = TVP5150_SVIDEO,
1063                         .amux     = EM28XX_AMUX_LINE_IN,
1064                         .gpio     = hauppauge_wintv_hvr_900_analog,
1065                 } },
1066         },
1067         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1068                 .name           = "Hauppauge WinTV HVR 950",
1069                 .tuner_type     = TUNER_XC2028,
1070                 .tuner_gpio     = default_tuner_gpio,
1071                 .mts_firmware   = 1,
1072                 .has_dvb        = 1,
1073                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1074                 .ir_codes       = RC_MAP_HAUPPAUGE,
1075                 .decoder        = EM28XX_TVP5150,
1076                 .input          = { {
1077                         .type     = EM28XX_VMUX_TELEVISION,
1078                         .vmux     = TVP5150_COMPOSITE0,
1079                         .amux     = EM28XX_AMUX_VIDEO,
1080                         .gpio     = hauppauge_wintv_hvr_900_analog,
1081                 }, {
1082                         .type     = EM28XX_VMUX_COMPOSITE1,
1083                         .vmux     = TVP5150_COMPOSITE1,
1084                         .amux     = EM28XX_AMUX_LINE_IN,
1085                         .gpio     = hauppauge_wintv_hvr_900_analog,
1086                 }, {
1087                         .type     = EM28XX_VMUX_SVIDEO,
1088                         .vmux     = TVP5150_SVIDEO,
1089                         .amux     = EM28XX_AMUX_LINE_IN,
1090                         .gpio     = hauppauge_wintv_hvr_900_analog,
1091                 } },
1092         },
1093         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1094                 .name           = "Pinnacle PCTV HD Pro Stick",
1095                 .tuner_type     = TUNER_XC2028,
1096                 .tuner_gpio   = default_tuner_gpio,
1097                 .mts_firmware   = 1,
1098                 .has_dvb        = 1,
1099                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1100                 .ir_codes       = RC_MAP_PINNACLE_PCTV_HD,
1101                 .decoder        = EM28XX_TVP5150,
1102                 .input          = { {
1103                         .type     = EM28XX_VMUX_TELEVISION,
1104                         .vmux     = TVP5150_COMPOSITE0,
1105                         .amux     = EM28XX_AMUX_VIDEO,
1106                         .gpio     = hauppauge_wintv_hvr_900_analog,
1107                 }, {
1108                         .type     = EM28XX_VMUX_COMPOSITE1,
1109                         .vmux     = TVP5150_COMPOSITE1,
1110                         .amux     = EM28XX_AMUX_LINE_IN,
1111                         .gpio     = hauppauge_wintv_hvr_900_analog,
1112                 }, {
1113                         .type     = EM28XX_VMUX_SVIDEO,
1114                         .vmux     = TVP5150_SVIDEO,
1115                         .amux     = EM28XX_AMUX_LINE_IN,
1116                         .gpio     = hauppauge_wintv_hvr_900_analog,
1117                 } },
1118         },
1119         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1120                 .name           = "AMD ATI TV Wonder HD 600",
1121                 .tuner_type     = TUNER_XC2028,
1122                 .tuner_gpio     = default_tuner_gpio,
1123                 .mts_firmware   = 1,
1124                 .has_dvb        = 1,
1125                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1126                 .ir_codes       = RC_MAP_ATI_TV_WONDER_HD_600,
1127                 .decoder        = EM28XX_TVP5150,
1128                 .input          = { {
1129                         .type     = EM28XX_VMUX_TELEVISION,
1130                         .vmux     = TVP5150_COMPOSITE0,
1131                         .amux     = EM28XX_AMUX_VIDEO,
1132                         .gpio     = hauppauge_wintv_hvr_900_analog,
1133                 }, {
1134                         .type     = EM28XX_VMUX_COMPOSITE1,
1135                         .vmux     = TVP5150_COMPOSITE1,
1136                         .amux     = EM28XX_AMUX_LINE_IN,
1137                         .gpio     = hauppauge_wintv_hvr_900_analog,
1138                 }, {
1139                         .type     = EM28XX_VMUX_SVIDEO,
1140                         .vmux     = TVP5150_SVIDEO,
1141                         .amux     = EM28XX_AMUX_LINE_IN,
1142                         .gpio     = hauppauge_wintv_hvr_900_analog,
1143                 } },
1144         },
1145         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1146                 .name           = "Terratec Hybrid XS",
1147                 .tuner_type     = TUNER_XC2028,
1148                 .tuner_gpio     = default_tuner_gpio,
1149                 .decoder        = EM28XX_TVP5150,
1150                 .has_dvb        = 1,
1151                 .dvb_gpio       = default_digital,
1152                 .ir_codes       = RC_MAP_TERRATEC_CINERGY_XS,
1153                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1154                 .input          = { {
1155                         .type     = EM28XX_VMUX_TELEVISION,
1156                         .vmux     = TVP5150_COMPOSITE0,
1157                         .amux     = EM28XX_AMUX_VIDEO,
1158                         .gpio     = default_analog,
1159                 }, {
1160                         .type     = EM28XX_VMUX_COMPOSITE1,
1161                         .vmux     = TVP5150_COMPOSITE1,
1162                         .amux     = EM28XX_AMUX_LINE_IN,
1163                         .gpio     = default_analog,
1164                 }, {
1165                         .type     = EM28XX_VMUX_SVIDEO,
1166                         .vmux     = TVP5150_SVIDEO,
1167                         .amux     = EM28XX_AMUX_LINE_IN,
1168                         .gpio     = default_analog,
1169                 } },
1170         },
1171         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1172            as Prodigy XS with a different PID, let's keep it separated for now
1173            maybe we'll need it lateron */
1174         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1175                 .name         = "Terratec Prodigy XS",
1176                 .tuner_type   = TUNER_XC2028,
1177                 .tuner_gpio   = default_tuner_gpio,
1178                 .decoder      = EM28XX_TVP5150,
1179                 .input        = { {
1180                         .type     = EM28XX_VMUX_TELEVISION,
1181                         .vmux     = TVP5150_COMPOSITE0,
1182                         .amux     = EM28XX_AMUX_VIDEO,
1183                         .gpio     = hauppauge_wintv_hvr_900_analog,
1184                 }, {
1185                         .type     = EM28XX_VMUX_COMPOSITE1,
1186                         .vmux     = TVP5150_COMPOSITE1,
1187                         .amux     = EM28XX_AMUX_LINE_IN,
1188                         .gpio     = hauppauge_wintv_hvr_900_analog,
1189                 }, {
1190                         .type     = EM28XX_VMUX_SVIDEO,
1191                         .vmux     = TVP5150_SVIDEO,
1192                         .amux     = EM28XX_AMUX_LINE_IN,
1193                         .gpio     = hauppauge_wintv_hvr_900_analog,
1194                 } },
1195         },
1196         [EM2820_BOARD_MSI_VOX_USB_2] = {
1197                 .name              = "MSI VOX USB 2.0",
1198                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
1199                 .tda9887_conf      = TDA9887_PRESENT      |
1200                                      TDA9887_PORT1_ACTIVE |
1201                                      TDA9887_PORT2_ACTIVE,
1202                 .max_range_640_480 = 1,
1203                 .decoder           = EM28XX_SAA711X,
1204                 .input             = { {
1205                         .type      = EM28XX_VMUX_TELEVISION,
1206                         .vmux      = SAA7115_COMPOSITE4,
1207                         .amux      = EM28XX_AMUX_VIDEO,
1208                 }, {
1209                         .type      = EM28XX_VMUX_COMPOSITE1,
1210                         .vmux      = SAA7115_COMPOSITE0,
1211                         .amux      = EM28XX_AMUX_LINE_IN,
1212                 }, {
1213                         .type      = EM28XX_VMUX_SVIDEO,
1214                         .vmux      = SAA7115_SVIDEO3,
1215                         .amux      = EM28XX_AMUX_LINE_IN,
1216                 } },
1217         },
1218         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1219                 .name         = "Terratec Cinergy 200 USB",
1220                 .is_em2800    = 1,
1221                 .has_ir_i2c   = 1,
1222                 .tuner_type   = TUNER_LG_TALN,
1223                 .tda9887_conf = TDA9887_PRESENT,
1224                 .decoder      = EM28XX_SAA711X,
1225                 .input        = { {
1226                         .type     = EM28XX_VMUX_TELEVISION,
1227                         .vmux     = SAA7115_COMPOSITE2,
1228                         .amux     = EM28XX_AMUX_VIDEO,
1229                 }, {
1230                         .type     = EM28XX_VMUX_COMPOSITE1,
1231                         .vmux     = SAA7115_COMPOSITE0,
1232                         .amux     = EM28XX_AMUX_LINE_IN,
1233                 }, {
1234                         .type     = EM28XX_VMUX_SVIDEO,
1235                         .vmux     = SAA7115_SVIDEO3,
1236                         .amux     = EM28XX_AMUX_LINE_IN,
1237                 } },
1238         },
1239         [EM2800_BOARD_GRABBEEX_USB2800] = {
1240                 .name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1241                 .is_em2800  = 1,
1242                 .decoder    = EM28XX_SAA711X,
1243                 .tuner_type = TUNER_ABSENT, /* capture only board */
1244                 .input      = { {
1245                         .type     = EM28XX_VMUX_COMPOSITE1,
1246                         .vmux     = SAA7115_COMPOSITE0,
1247                         .amux     = EM28XX_AMUX_LINE_IN,
1248                 }, {
1249                         .type     = EM28XX_VMUX_SVIDEO,
1250                         .vmux     = SAA7115_SVIDEO3,
1251                         .amux     = EM28XX_AMUX_LINE_IN,
1252                 } },
1253         },
1254         [EM2800_BOARD_VC211A] = {
1255                 .name         = "Actionmaster/LinXcel/Digitus VC211A",
1256                 .is_em2800    = 1,
1257                 .tuner_type   = TUNER_ABSENT,   /* Capture-only board */
1258                 .decoder      = EM28XX_SAA711X,
1259                 .input        = { {
1260                         .type     = EM28XX_VMUX_COMPOSITE1,
1261                         .vmux     = SAA7115_COMPOSITE0,
1262                         .amux     = EM28XX_AMUX_LINE_IN,
1263                         .gpio     = vc211a_enable,
1264                 }, {
1265                         .type     = EM28XX_VMUX_SVIDEO,
1266                         .vmux     = SAA7115_SVIDEO3,
1267                         .amux     = EM28XX_AMUX_LINE_IN,
1268                         .gpio     = vc211a_enable,
1269                 } },
1270         },
1271         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1272                 .name         = "Leadtek Winfast USB II",
1273                 .is_em2800    = 1,
1274                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1275                 .tda9887_conf = TDA9887_PRESENT,
1276                 .decoder      = EM28XX_SAA711X,
1277                 .input        = { {
1278                         .type     = EM28XX_VMUX_TELEVISION,
1279                         .vmux     = SAA7115_COMPOSITE2,
1280                         .amux     = EM28XX_AMUX_VIDEO,
1281                 }, {
1282                         .type     = EM28XX_VMUX_COMPOSITE1,
1283                         .vmux     = SAA7115_COMPOSITE0,
1284                         .amux     = EM28XX_AMUX_LINE_IN,
1285                 }, {
1286                         .type     = EM28XX_VMUX_SVIDEO,
1287                         .vmux     = SAA7115_SVIDEO3,
1288                         .amux     = EM28XX_AMUX_LINE_IN,
1289                 } },
1290         },
1291         [EM2800_BOARD_KWORLD_USB2800] = {
1292                 .name         = "Kworld USB2800",
1293                 .is_em2800    = 1,
1294                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
1295                 .tda9887_conf = TDA9887_PRESENT,
1296                 .decoder      = EM28XX_SAA711X,
1297                 .input        = { {
1298                         .type     = EM28XX_VMUX_TELEVISION,
1299                         .vmux     = SAA7115_COMPOSITE2,
1300                         .amux     = EM28XX_AMUX_VIDEO,
1301                 }, {
1302                         .type     = EM28XX_VMUX_COMPOSITE1,
1303                         .vmux     = SAA7115_COMPOSITE0,
1304                         .amux     = EM28XX_AMUX_LINE_IN,
1305                 }, {
1306                         .type     = EM28XX_VMUX_SVIDEO,
1307                         .vmux     = SAA7115_SVIDEO3,
1308                         .amux     = EM28XX_AMUX_LINE_IN,
1309                 } },
1310         },
1311         [EM2820_BOARD_PINNACLE_DVC_90] = {
1312                 .name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1313                                "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1314                 .tuner_type   = TUNER_ABSENT, /* capture only board */
1315                 .decoder      = EM28XX_SAA711X,
1316                 .input        = { {
1317                         .type     = EM28XX_VMUX_COMPOSITE1,
1318                         .vmux     = SAA7115_COMPOSITE0,
1319                         .amux     = EM28XX_AMUX_LINE_IN,
1320                 }, {
1321                         .type     = EM28XX_VMUX_SVIDEO,
1322                         .vmux     = SAA7115_SVIDEO3,
1323                         .amux     = EM28XX_AMUX_LINE_IN,
1324                 } },
1325         },
1326         [EM2800_BOARD_VGEAR_POCKETTV] = {
1327                 .name         = "V-Gear PocketTV",
1328                 .is_em2800    = 1,
1329                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1330                 .tda9887_conf = TDA9887_PRESENT,
1331                 .decoder      = EM28XX_SAA711X,
1332                 .input        = { {
1333                         .type     = EM28XX_VMUX_TELEVISION,
1334                         .vmux     = SAA7115_COMPOSITE2,
1335                         .amux     = EM28XX_AMUX_VIDEO,
1336                 }, {
1337                         .type     = EM28XX_VMUX_COMPOSITE1,
1338                         .vmux     = SAA7115_COMPOSITE0,
1339                         .amux     = EM28XX_AMUX_LINE_IN,
1340                 }, {
1341                         .type     = EM28XX_VMUX_SVIDEO,
1342                         .vmux     = SAA7115_SVIDEO3,
1343                         .amux     = EM28XX_AMUX_LINE_IN,
1344                 } },
1345         },
1346         [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1347                 .name         = "Pixelview PlayTV Box 4 USB 2.0",
1348                 .tda9887_conf = TDA9887_PRESENT,
1349                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1350                 .decoder      = EM28XX_SAA711X,
1351                 .input        = { {
1352                         .type     = EM28XX_VMUX_TELEVISION,
1353                         .vmux     = SAA7115_COMPOSITE2,
1354                         .amux     = EM28XX_AMUX_VIDEO,
1355                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1356                                     EM28XX_AOUT_MASTER, /* Line out pin */
1357                 }, {
1358                         .type     = EM28XX_VMUX_COMPOSITE1,
1359                         .vmux     = SAA7115_COMPOSITE0,
1360                         .amux     = EM28XX_AMUX_LINE_IN,
1361                 }, {
1362                         .type     = EM28XX_VMUX_SVIDEO,
1363                         .vmux     = SAA7115_SVIDEO3,
1364                         .amux     = EM28XX_AMUX_LINE_IN,
1365                 } },
1366         },
1367         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1368                 .name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1369                 .has_snapshot_button = 1,
1370                 .tda9887_conf = TDA9887_PRESENT,
1371                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1372                 .decoder      = EM28XX_SAA711X,
1373                 .input        = { {
1374                         .type     = EM28XX_VMUX_TELEVISION,
1375                         .vmux     = SAA7115_COMPOSITE2,
1376                         .amux     = EM28XX_AMUX_VIDEO,
1377                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1378                                     EM28XX_AOUT_MASTER, /* Line out pin */
1379                 }, {
1380                         .type     = EM28XX_VMUX_COMPOSITE1,
1381                         .vmux     = SAA7115_COMPOSITE0,
1382                         .amux     = EM28XX_AMUX_LINE_IN,
1383                 }, {
1384                         .type     = EM28XX_VMUX_SVIDEO,
1385                         .vmux     = SAA7115_SVIDEO3,
1386                         .amux     = EM28XX_AMUX_LINE_IN,
1387                 } },
1388         },
1389         [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1390                 .name                = "EM2860/SAA711X Reference Design",
1391                 .has_snapshot_button = 1,
1392                 .tuner_type          = TUNER_ABSENT,
1393                 .decoder             = EM28XX_SAA711X,
1394                 .input               = { {
1395                         .type     = EM28XX_VMUX_SVIDEO,
1396                         .vmux     = SAA7115_SVIDEO3,
1397                 }, {
1398                         .type     = EM28XX_VMUX_COMPOSITE1,
1399                         .vmux     = SAA7115_COMPOSITE0,
1400                 } },
1401         },
1402
1403         [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1404                 .i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
1405                                   EM28XX_I2C_CLK_WAIT_ENABLE |
1406                                   EM28XX_I2C_FREQ_100_KHZ,
1407                 .xclk           = EM28XX_XCLK_FREQUENCY_10MHZ,
1408                 .name           = "EM2874 Leadership ISDBT",
1409                 .tuner_type     = TUNER_ABSENT,
1410                 .tuner_gpio     = leadership_reset,
1411                 .dvb_gpio       = leadership_digital,
1412                 .has_dvb        = 1,
1413         },
1414
1415         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1416                 .name         = "MSI DigiVox A/D",
1417                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1418                 .tuner_type   = TUNER_XC2028,
1419                 .tuner_gpio   = default_tuner_gpio,
1420                 .decoder      = EM28XX_TVP5150,
1421                 .input        = { {
1422                         .type     = EM28XX_VMUX_TELEVISION,
1423                         .vmux     = TVP5150_COMPOSITE0,
1424                         .amux     = EM28XX_AMUX_VIDEO,
1425                         .gpio     = em2880_msi_digivox_ad_analog,
1426                 }, {
1427                         .type     = EM28XX_VMUX_COMPOSITE1,
1428                         .vmux     = TVP5150_COMPOSITE1,
1429                         .amux     = EM28XX_AMUX_LINE_IN,
1430                         .gpio     = em2880_msi_digivox_ad_analog,
1431                 }, {
1432                         .type     = EM28XX_VMUX_SVIDEO,
1433                         .vmux     = TVP5150_SVIDEO,
1434                         .amux     = EM28XX_AMUX_LINE_IN,
1435                         .gpio     = em2880_msi_digivox_ad_analog,
1436                 } },
1437         },
1438         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1439                 .name         = "MSI DigiVox A/D II",
1440                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1441                 .tuner_type   = TUNER_XC2028,
1442                 .tuner_gpio   = default_tuner_gpio,
1443                 .decoder      = EM28XX_TVP5150,
1444                 .input        = { {
1445                         .type     = EM28XX_VMUX_TELEVISION,
1446                         .vmux     = TVP5150_COMPOSITE0,
1447                         .amux     = EM28XX_AMUX_VIDEO,
1448                         .gpio     = em2880_msi_digivox_ad_analog,
1449                 }, {
1450                         .type     = EM28XX_VMUX_COMPOSITE1,
1451                         .vmux     = TVP5150_COMPOSITE1,
1452                         .amux     = EM28XX_AMUX_LINE_IN,
1453                         .gpio     = em2880_msi_digivox_ad_analog,
1454                 }, {
1455                         .type     = EM28XX_VMUX_SVIDEO,
1456                         .vmux     = TVP5150_SVIDEO,
1457                         .amux     = EM28XX_AMUX_LINE_IN,
1458                         .gpio     = em2880_msi_digivox_ad_analog,
1459                 } },
1460         },
1461         [EM2880_BOARD_KWORLD_DVB_305U] = {
1462                 .name         = "KWorld DVB-T 305U",
1463                 .tuner_type   = TUNER_XC2028,
1464                 .tuner_gpio   = default_tuner_gpio,
1465                 .decoder      = EM28XX_TVP5150,
1466                 .input        = { {
1467                         .type     = EM28XX_VMUX_TELEVISION,
1468                         .vmux     = TVP5150_COMPOSITE0,
1469                         .amux     = EM28XX_AMUX_VIDEO,
1470                 }, {
1471                         .type     = EM28XX_VMUX_COMPOSITE1,
1472                         .vmux     = TVP5150_COMPOSITE1,
1473                         .amux     = EM28XX_AMUX_LINE_IN,
1474                 }, {
1475                         .type     = EM28XX_VMUX_SVIDEO,
1476                         .vmux     = TVP5150_SVIDEO,
1477                         .amux     = EM28XX_AMUX_LINE_IN,
1478                 } },
1479         },
1480         [EM2880_BOARD_KWORLD_DVB_310U] = {
1481                 .name         = "KWorld DVB-T 310U",
1482                 .tuner_type   = TUNER_XC2028,
1483                 .tuner_gpio   = default_tuner_gpio,
1484                 .has_dvb      = 1,
1485                 .dvb_gpio     = default_digital,
1486                 .mts_firmware = 1,
1487                 .decoder      = EM28XX_TVP5150,
1488                 .input        = { {
1489                         .type     = EM28XX_VMUX_TELEVISION,
1490                         .vmux     = TVP5150_COMPOSITE0,
1491                         .amux     = EM28XX_AMUX_VIDEO,
1492                         .gpio     = default_analog,
1493                 }, {
1494                         .type     = EM28XX_VMUX_COMPOSITE1,
1495                         .vmux     = TVP5150_COMPOSITE1,
1496                         .amux     = EM28XX_AMUX_LINE_IN,
1497                         .gpio     = default_analog,
1498                 }, {    /* S-video has not been tested yet */
1499                         .type     = EM28XX_VMUX_SVIDEO,
1500                         .vmux     = TVP5150_SVIDEO,
1501                         .amux     = EM28XX_AMUX_LINE_IN,
1502                         .gpio     = default_analog,
1503                 } },
1504         },
1505         [EM2882_BOARD_KWORLD_ATSC_315U] = {
1506                 .name           = "KWorld ATSC 315U HDTV TV Box",
1507                 .valid          = EM28XX_BOARD_NOT_VALIDATED,
1508                 .tuner_type     = TUNER_THOMSON_DTT761X,
1509                 .tuner_gpio     = em2882_kworld_315u_tuner_gpio,
1510                 .tda9887_conf   = TDA9887_PRESENT,
1511                 .decoder        = EM28XX_SAA711X,
1512                 .has_dvb        = 1,
1513                 .dvb_gpio       = em2882_kworld_315u_digital,
1514                 .ir_codes       = RC_MAP_KWORLD_315U,
1515                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ,
1516                 .i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE,
1517                 /* Analog mode - still not ready */
1518                 /*.input        = { {
1519                         .type = EM28XX_VMUX_TELEVISION,
1520                         .vmux = SAA7115_COMPOSITE2,
1521                         .amux = EM28XX_AMUX_VIDEO,
1522                         .gpio = em2882_kworld_315u_analog,
1523                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1524                 }, {
1525                         .type = EM28XX_VMUX_COMPOSITE1,
1526                         .vmux = SAA7115_COMPOSITE0,
1527                         .amux = EM28XX_AMUX_LINE_IN,
1528                         .gpio = em2882_kworld_315u_analog1,
1529                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1530                 }, {
1531                         .type = EM28XX_VMUX_SVIDEO,
1532                         .vmux = SAA7115_SVIDEO3,
1533                         .amux = EM28XX_AMUX_LINE_IN,
1534                         .gpio = em2882_kworld_315u_analog1,
1535                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1536                 } }, */
1537         },
1538         [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1539                 .name = "Empire dual TV",
1540                 .tuner_type = TUNER_XC2028,
1541                 .tuner_gpio = default_tuner_gpio,
1542                 .has_dvb = 1,
1543                 .dvb_gpio = default_digital,
1544                 .mts_firmware = 1,
1545                 .decoder = EM28XX_TVP5150,
1546                 .input = { {
1547                         .type = EM28XX_VMUX_TELEVISION,
1548                         .vmux = TVP5150_COMPOSITE0,
1549                         .amux = EM28XX_AMUX_VIDEO,
1550                         .gpio = default_analog,
1551                 }, {
1552                         .type = EM28XX_VMUX_COMPOSITE1,
1553                         .vmux = TVP5150_COMPOSITE1,
1554                         .amux = EM28XX_AMUX_LINE_IN,
1555                         .gpio = default_analog,
1556                 }, {
1557                         .type = EM28XX_VMUX_SVIDEO,
1558                         .vmux = TVP5150_SVIDEO,
1559                         .amux = EM28XX_AMUX_LINE_IN,
1560                         .gpio = default_analog,
1561                 } },
1562         },
1563         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1564                 .name         = "DNT DA2 Hybrid",
1565                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1566                 .tuner_type   = TUNER_XC2028,
1567                 .tuner_gpio   = default_tuner_gpio,
1568                 .decoder      = EM28XX_TVP5150,
1569                 .input        = { {
1570                         .type     = EM28XX_VMUX_TELEVISION,
1571                         .vmux     = TVP5150_COMPOSITE0,
1572                         .amux     = EM28XX_AMUX_VIDEO,
1573                         .gpio     = default_analog,
1574                 }, {
1575                         .type     = EM28XX_VMUX_COMPOSITE1,
1576                         .vmux     = TVP5150_COMPOSITE1,
1577                         .amux     = EM28XX_AMUX_LINE_IN,
1578                         .gpio     = default_analog,
1579                 }, {
1580                         .type     = EM28XX_VMUX_SVIDEO,
1581                         .vmux     = TVP5150_SVIDEO,
1582                         .amux     = EM28XX_AMUX_LINE_IN,
1583                         .gpio     = default_analog,
1584                 } },
1585         },
1586         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1587                 .name         = "Pinnacle Hybrid Pro",
1588                 .tuner_type   = TUNER_XC2028,
1589                 .tuner_gpio   = default_tuner_gpio,
1590                 .decoder      = EM28XX_TVP5150,
1591                 .has_dvb      = 1,
1592                 .dvb_gpio     = pinnacle_hybrid_pro_digital,
1593                 .input        = { {
1594                         .type     = EM28XX_VMUX_TELEVISION,
1595                         .vmux     = TVP5150_COMPOSITE0,
1596                         .amux     = EM28XX_AMUX_VIDEO,
1597                         .gpio     = pinnacle_hybrid_pro_analog,
1598                 }, {
1599                         .type     = EM28XX_VMUX_COMPOSITE1,
1600                         .vmux     = TVP5150_COMPOSITE1,
1601                         .amux     = EM28XX_AMUX_LINE_IN,
1602                         .gpio     = pinnacle_hybrid_pro_analog,
1603                 }, {
1604                         .type     = EM28XX_VMUX_SVIDEO,
1605                         .vmux     = TVP5150_SVIDEO,
1606                         .amux     = EM28XX_AMUX_LINE_IN,
1607                         .gpio     = pinnacle_hybrid_pro_analog,
1608                 } },
1609         },
1610         [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1611                 .name         = "Pinnacle Hybrid Pro (330e)",
1612                 .tuner_type   = TUNER_XC2028,
1613                 .tuner_gpio   = default_tuner_gpio,
1614                 .mts_firmware = 1,
1615                 .has_dvb      = 1,
1616                 .dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1617                 .ir_codes     = RC_MAP_PINNACLE_PCTV_HD,
1618                 .decoder      = EM28XX_TVP5150,
1619                 .input        = { {
1620                         .type     = EM28XX_VMUX_TELEVISION,
1621                         .vmux     = TVP5150_COMPOSITE0,
1622                         .amux     = EM28XX_AMUX_VIDEO,
1623                         .gpio     = hauppauge_wintv_hvr_900_analog,
1624                 }, {
1625                         .type     = EM28XX_VMUX_COMPOSITE1,
1626                         .vmux     = TVP5150_COMPOSITE1,
1627                         .amux     = EM28XX_AMUX_LINE_IN,
1628                         .gpio     = hauppauge_wintv_hvr_900_analog,
1629                 }, {
1630                         .type     = EM28XX_VMUX_SVIDEO,
1631                         .vmux     = TVP5150_SVIDEO,
1632                         .amux     = EM28XX_AMUX_LINE_IN,
1633                         .gpio     = hauppauge_wintv_hvr_900_analog,
1634                 } },
1635         },
1636         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1637                 .name         = "Kworld VS-DVB-T 323UR",
1638                 .tuner_type   = TUNER_XC2028,
1639                 .tuner_gpio   = default_tuner_gpio,
1640                 .decoder      = EM28XX_TVP5150,
1641                 .mts_firmware = 1,
1642                 .has_dvb      = 1,
1643                 .dvb_gpio     = kworld_330u_digital,
1644                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1645                 .ir_codes     = RC_MAP_KWORLD_315U,
1646                 .input        = { {
1647                         .type     = EM28XX_VMUX_TELEVISION,
1648                         .vmux     = TVP5150_COMPOSITE0,
1649                         .amux     = EM28XX_AMUX_VIDEO,
1650                 }, {
1651                         .type     = EM28XX_VMUX_COMPOSITE1,
1652                         .vmux     = TVP5150_COMPOSITE1,
1653                         .amux     = EM28XX_AMUX_LINE_IN,
1654                 }, {
1655                         .type     = EM28XX_VMUX_SVIDEO,
1656                         .vmux     = TVP5150_SVIDEO,
1657                         .amux     = EM28XX_AMUX_LINE_IN,
1658                 } },
1659         },
1660         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1661                 .name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1662                 .tuner_type   = TUNER_XC2028,
1663                 .tuner_gpio   = default_tuner_gpio,
1664                 .mts_firmware = 1,
1665                 .decoder      = EM28XX_TVP5150,
1666                 .has_dvb      = 1,
1667                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
1668                 .ir_codes     = RC_MAP_TERRATEC_CINERGY_XS,
1669                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
1670                 .input        = { {
1671                         .type     = EM28XX_VMUX_TELEVISION,
1672                         .vmux     = TVP5150_COMPOSITE0,
1673                         .amux     = EM28XX_AMUX_VIDEO,
1674                         .gpio     = hauppauge_wintv_hvr_900_analog,
1675                 }, {
1676                         .type     = EM28XX_VMUX_COMPOSITE1,
1677                         .vmux     = TVP5150_COMPOSITE1,
1678                         .amux     = EM28XX_AMUX_LINE_IN,
1679                         .gpio     = hauppauge_wintv_hvr_900_analog,
1680                 }, {
1681                         .type     = EM28XX_VMUX_SVIDEO,
1682                         .vmux     = TVP5150_SVIDEO,
1683                         .amux     = EM28XX_AMUX_LINE_IN,
1684                         .gpio     = hauppauge_wintv_hvr_900_analog,
1685                 } },
1686         },
1687         [EM2882_BOARD_DIKOM_DK300] = {
1688                 .name         = "Dikom DK300",
1689                 .tuner_type   = TUNER_XC2028,
1690                 .tuner_gpio   = default_tuner_gpio,
1691                 .decoder      = EM28XX_TVP5150,
1692                 .mts_firmware = 1,
1693                 .has_dvb      = 1,
1694                 .dvb_gpio     = dikom_dk300_digital,
1695                 .input        = { {
1696                         .type     = EM28XX_VMUX_TELEVISION,
1697                         .vmux     = TVP5150_COMPOSITE0,
1698                         .amux     = EM28XX_AMUX_VIDEO,
1699                         .gpio     = default_analog,
1700                 } },
1701         },
1702         [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1703                 .name         = "Kworld PlusTV HD Hybrid 330",
1704                 .tuner_type   = TUNER_XC2028,
1705                 .tuner_gpio   = default_tuner_gpio,
1706                 .decoder      = EM28XX_TVP5150,
1707                 .mts_firmware = 1,
1708                 .has_dvb      = 1,
1709                 .dvb_gpio     = kworld_330u_digital,
1710                 .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1711                 .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
1712                                     EM28XX_I2C_EEPROM_ON_BOARD |
1713                                     EM28XX_I2C_EEPROM_KEY_VALID,
1714                 .input        = { {
1715                         .type     = EM28XX_VMUX_TELEVISION,
1716                         .vmux     = TVP5150_COMPOSITE0,
1717                         .amux     = EM28XX_AMUX_VIDEO,
1718                         .gpio     = kworld_330u_analog,
1719                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1720                 }, {
1721                         .type     = EM28XX_VMUX_COMPOSITE1,
1722                         .vmux     = TVP5150_COMPOSITE1,
1723                         .amux     = EM28XX_AMUX_LINE_IN,
1724                         .gpio     = kworld_330u_analog,
1725                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1726                 }, {
1727                         .type     = EM28XX_VMUX_SVIDEO,
1728                         .vmux     = TVP5150_SVIDEO,
1729                         .amux     = EM28XX_AMUX_LINE_IN,
1730                         .gpio     = kworld_330u_analog,
1731                 } },
1732         },
1733         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1734                 .name         = "Compro VideoMate ForYou/Stereo",
1735                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1736                 .tvaudio_addr = 0xb0,
1737                 .tda9887_conf = TDA9887_PRESENT,
1738                 .decoder      = EM28XX_TVP5150,
1739                 .adecoder     = EM28XX_TVAUDIO,
1740                 .mute_gpio    = compro_mute_gpio,
1741                 .input        = { {
1742                         .type     = EM28XX_VMUX_TELEVISION,
1743                         .vmux     = TVP5150_COMPOSITE0,
1744                         .amux     = EM28XX_AMUX_VIDEO,
1745                         .gpio     = compro_unmute_tv_gpio,
1746                 }, {
1747                         .type     = EM28XX_VMUX_SVIDEO,
1748                         .vmux     = TVP5150_SVIDEO,
1749                         .amux     = EM28XX_AMUX_LINE_IN,
1750                         .gpio     = compro_unmute_svid_gpio,
1751                 } },
1752         },
1753         [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1754                 .name         = "Kaiomy TVnPC U2",
1755                 .vchannels    = 3,
1756                 .tuner_type   = TUNER_XC2028,
1757                 .tuner_addr   = 0x61,
1758                 .mts_firmware = 1,
1759                 .decoder      = EM28XX_TVP5150,
1760                 .tuner_gpio   = default_tuner_gpio,
1761                 .ir_codes     = RC_MAP_KAIOMY,
1762                 .input          = { {
1763                         .type     = EM28XX_VMUX_TELEVISION,
1764                         .vmux     = TVP5150_COMPOSITE0,
1765                         .amux     = EM28XX_AMUX_VIDEO,
1766
1767                 }, {
1768                         .type     = EM28XX_VMUX_COMPOSITE1,
1769                         .vmux     = TVP5150_COMPOSITE1,
1770                         .amux     = EM28XX_AMUX_LINE_IN,
1771                 }, {
1772                         .type     = EM28XX_VMUX_SVIDEO,
1773                         .vmux     = TVP5150_SVIDEO,
1774                         .amux     = EM28XX_AMUX_LINE_IN,
1775                 } },
1776                 .radio          = {
1777                         .type     = EM28XX_RADIO,
1778                         .amux     = EM28XX_AMUX_LINE_IN,
1779                 }
1780         },
1781         [EM2860_BOARD_EASYCAP] = {
1782                 .name         = "Easy Cap Capture DC-60",
1783                 .vchannels    = 2,
1784                 .tuner_type   = TUNER_ABSENT,
1785                 .decoder      = EM28XX_SAA711X,
1786                 .input           = { {
1787                         .type     = EM28XX_VMUX_COMPOSITE1,
1788                         .vmux     = SAA7115_COMPOSITE0,
1789                         .amux     = EM28XX_AMUX_LINE_IN,
1790                 }, {
1791                         .type     = EM28XX_VMUX_SVIDEO,
1792                         .vmux     = SAA7115_SVIDEO3,
1793                         .amux     = EM28XX_AMUX_LINE_IN,
1794                 } },
1795         },
1796         [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1797                 .name       = "IO-DATA GV-MVP/SZ",
1798                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
1799                 .tuner_gpio   = default_tuner_gpio,
1800                 .tda9887_conf = TDA9887_PRESENT,
1801                 .decoder      = EM28XX_TVP5150,
1802                 .input        = { {
1803                         .type     = EM28XX_VMUX_TELEVISION,
1804                         .vmux     = TVP5150_COMPOSITE0,
1805                         .amux     = EM28XX_AMUX_VIDEO,
1806                 }, { /* Composite has not been tested yet */
1807                         .type     = EM28XX_VMUX_COMPOSITE1,
1808                         .vmux     = TVP5150_COMPOSITE1,
1809                         .amux     = EM28XX_AMUX_VIDEO,
1810                 }, { /* S-video has not been tested yet */
1811                         .type     = EM28XX_VMUX_SVIDEO,
1812                         .vmux     = TVP5150_SVIDEO,
1813                         .amux     = EM28XX_AMUX_VIDEO,
1814                 } },
1815         },
1816         [EM2860_BOARD_TERRATEC_GRABBY] = {
1817                 .name            = "Terratec Grabby",
1818                 .vchannels       = 2,
1819                 .tuner_type      = TUNER_ABSENT,
1820                 .decoder         = EM28XX_SAA711X,
1821                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1822                 .input           = { {
1823                         .type     = EM28XX_VMUX_COMPOSITE1,
1824                         .vmux     = SAA7115_COMPOSITE0,
1825                         .amux     = EM28XX_AMUX_LINE_IN,
1826                 }, {
1827                         .type     = EM28XX_VMUX_SVIDEO,
1828                         .vmux     = SAA7115_SVIDEO3,
1829                         .amux     = EM28XX_AMUX_LINE_IN,
1830                 } },
1831         },
1832         [EM2860_BOARD_TERRATEC_AV350] = {
1833                 .name            = "Terratec AV350",
1834                 .vchannels       = 2,
1835                 .tuner_type      = TUNER_ABSENT,
1836                 .decoder         = EM28XX_TVP5150,
1837                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1838                 .mute_gpio       = terratec_av350_mute_gpio,
1839                 .input           = { {
1840                         .type     = EM28XX_VMUX_COMPOSITE1,
1841                         .vmux     = TVP5150_COMPOSITE1,
1842                         .amux     = EM28XX_AUDIO_SRC_LINE,
1843                         .gpio     = terratec_av350_unmute_gpio,
1844
1845                 }, {
1846                         .type     = EM28XX_VMUX_SVIDEO,
1847                         .vmux     = TVP5150_SVIDEO,
1848                         .amux     = EM28XX_AUDIO_SRC_LINE,
1849                         .gpio     = terratec_av350_unmute_gpio,
1850                 } },
1851         },
1852
1853         [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1854                 .name         = "Elgato Video Capture",
1855                 .decoder      = EM28XX_SAA711X,
1856                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
1857                 .input        = { {
1858                         .type  = EM28XX_VMUX_COMPOSITE1,
1859                         .vmux  = SAA7115_COMPOSITE0,
1860                         .amux  = EM28XX_AMUX_LINE_IN,
1861                 }, {
1862                         .type  = EM28XX_VMUX_SVIDEO,
1863                         .vmux  = SAA7115_SVIDEO3,
1864                         .amux  = EM28XX_AMUX_LINE_IN,
1865                 } },
1866         },
1867
1868         [EM2882_BOARD_EVGA_INDTUBE] = {
1869                 .name         = "Evga inDtube",
1870                 .tuner_type   = TUNER_XC2028,
1871                 .tuner_gpio   = default_tuner_gpio,
1872                 .decoder      = EM28XX_TVP5150,
1873                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1874                 .mts_firmware = 1,
1875                 .has_dvb      = 1,
1876                 .dvb_gpio     = evga_indtube_digital,
1877                 .ir_codes     = RC_MAP_EVGA_INDTUBE,
1878                 .input        = { {
1879                         .type     = EM28XX_VMUX_TELEVISION,
1880                         .vmux     = TVP5150_COMPOSITE0,
1881                         .amux     = EM28XX_AMUX_VIDEO,
1882                         .gpio     = evga_indtube_analog,
1883                 }, {
1884                         .type     = EM28XX_VMUX_COMPOSITE1,
1885                         .vmux     = TVP5150_COMPOSITE1,
1886                         .amux     = EM28XX_AMUX_LINE_IN,
1887                         .gpio     = evga_indtube_analog,
1888                 }, {
1889                         .type     = EM28XX_VMUX_SVIDEO,
1890                         .vmux     = TVP5150_SVIDEO,
1891                         .amux     = EM28XX_AMUX_LINE_IN,
1892                         .gpio     = evga_indtube_analog,
1893                 } },
1894         },
1895         /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1896            Infineon TUA6034) */
1897         [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1898                 .name          = "Reddo DVB-C USB TV Box",
1899                 .tuner_type    = TUNER_ABSENT,
1900                 .tuner_gpio    = reddo_dvb_c_usb_box,
1901                 .has_dvb       = 1,
1902         },
1903         /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1904          * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1905          * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1906         [EM2870_BOARD_KWORLD_A340] = {
1907                 .name       = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1908                 .tuner_type = TUNER_ABSENT,     /* Digital-only TDA18271HD */
1909                 .has_dvb    = 1,
1910                 .dvb_gpio   = kworld_a340_digital,
1911                 .tuner_gpio = default_tuner_gpio,
1912         },
1913         /* 2013:024f PCTV nanoStick T2 290e.
1914          * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1915         [EM28174_BOARD_PCTV_290E] = {
1916                 .name          = "PCTV nanoStick T2 290e",
1917                 .i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
1918                         EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1919                 .tuner_type    = TUNER_ABSENT,
1920                 .tuner_gpio    = pctv_290e,
1921                 .has_dvb       = 1,
1922                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1923         },
1924         /* 2013:024f PCTV DVB-S2 Stick 460e
1925          * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1926         [EM28174_BOARD_PCTV_460E] = {
1927                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1928                         EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1929                 .name          = "PCTV DVB-S2 Stick (460e)",
1930                 .tuner_type    = TUNER_ABSENT,
1931                 .tuner_gpio    = pctv_460e,
1932                 .has_dvb       = 1,
1933                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1934         },
1935         /* eb1a:5006 Honestech VIDBOX NW03
1936          * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1937         [EM2860_BOARD_HT_VIDBOX_NW03] = {
1938                 .name                = "Honestech Vidbox NW03",
1939                 .tuner_type          = TUNER_ABSENT,
1940                 .decoder             = EM28XX_SAA711X,
1941                 .input               = { {
1942                         .type     = EM28XX_VMUX_COMPOSITE1,
1943                         .vmux     = SAA7115_COMPOSITE0,
1944                         .amux     = EM28XX_AMUX_LINE_IN,
1945                 }, {
1946                         .type     = EM28XX_VMUX_SVIDEO,
1947                         .vmux     = SAA7115_SVIDEO3,  /* S-VIDEO needs confirming */
1948                         .amux     = EM28XX_AMUX_LINE_IN,
1949                 } },
1950         },
1951         /* 1b80:e425 MaxMedia UB425-TC
1952          * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
1953         [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
1954                 .name          = "MaxMedia UB425-TC",
1955                 .tuner_type    = TUNER_ABSENT,
1956                 .tuner_gpio    = maxmedia_ub425_tc,
1957                 .has_dvb       = 1,
1958                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1959                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1960                                 EM28XX_I2C_FREQ_400_KHZ,
1961         },
1962         /* 2304:0242 PCTV QuatroStick (510e)
1963          * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1964         [EM2884_BOARD_PCTV_510E] = {
1965                 .name          = "PCTV QuatroStick (510e)",
1966                 .tuner_type    = TUNER_ABSENT,
1967                 .tuner_gpio    = pctv_510e,
1968                 .has_dvb       = 1,
1969                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1970                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1971                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1972                                 EM28XX_I2C_FREQ_400_KHZ,
1973         },
1974         /* 2013:0251 PCTV QuatroStick nano (520e)
1975          * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1976         [EM2884_BOARD_PCTV_520E] = {
1977                 .name          = "PCTV QuatroStick nano (520e)",
1978                 .tuner_type    = TUNER_ABSENT,
1979                 .tuner_gpio    = pctv_520e,
1980                 .has_dvb       = 1,
1981                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1982                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1983                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1984                                 EM28XX_I2C_FREQ_400_KHZ,
1985         },
1986 };
1987 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1988
1989 /* table of devices that work with this driver */
1990 struct usb_device_id em28xx_id_table[] = {
1991         { USB_DEVICE(0xeb1a, 0x2750),
1992                         .driver_info = EM2750_BOARD_UNKNOWN },
1993         { USB_DEVICE(0xeb1a, 0x2751),
1994                         .driver_info = EM2750_BOARD_UNKNOWN },
1995         { USB_DEVICE(0xeb1a, 0x2800),
1996                         .driver_info = EM2800_BOARD_UNKNOWN },
1997         { USB_DEVICE(0xeb1a, 0x2710),
1998                         .driver_info = EM2820_BOARD_UNKNOWN },
1999         { USB_DEVICE(0xeb1a, 0x2820),
2000                         .driver_info = EM2820_BOARD_UNKNOWN },
2001         { USB_DEVICE(0xeb1a, 0x2821),
2002                         .driver_info = EM2820_BOARD_UNKNOWN },
2003         { USB_DEVICE(0xeb1a, 0x2860),
2004                         .driver_info = EM2820_BOARD_UNKNOWN },
2005         { USB_DEVICE(0xeb1a, 0x2861),
2006                         .driver_info = EM2820_BOARD_UNKNOWN },
2007         { USB_DEVICE(0xeb1a, 0x2862),
2008                         .driver_info = EM2820_BOARD_UNKNOWN },
2009         { USB_DEVICE(0xeb1a, 0x2863),
2010                         .driver_info = EM2820_BOARD_UNKNOWN },
2011         { USB_DEVICE(0xeb1a, 0x2870),
2012                         .driver_info = EM2820_BOARD_UNKNOWN },
2013         { USB_DEVICE(0xeb1a, 0x2881),
2014                         .driver_info = EM2820_BOARD_UNKNOWN },
2015         { USB_DEVICE(0xeb1a, 0x2883),
2016                         .driver_info = EM2820_BOARD_UNKNOWN },
2017         { USB_DEVICE(0xeb1a, 0x2868),
2018                         .driver_info = EM2820_BOARD_UNKNOWN },
2019         { USB_DEVICE(0xeb1a, 0x2875),
2020                         .driver_info = EM2820_BOARD_UNKNOWN },
2021         { USB_DEVICE(0xeb1a, 0xe300),
2022                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2023         { USB_DEVICE(0xeb1a, 0xe303),
2024                         .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2025         { USB_DEVICE(0xeb1a, 0xe305),
2026                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2027         { USB_DEVICE(0xeb1a, 0xe310),
2028                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2029         { USB_DEVICE(0xeb1a, 0xa313),
2030                 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2031         { USB_DEVICE(0xeb1a, 0xa316),
2032                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2033         { USB_DEVICE(0xeb1a, 0xe320),
2034                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2035         { USB_DEVICE(0xeb1a, 0xe323),
2036                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2037         { USB_DEVICE(0xeb1a, 0xe350),
2038                         .driver_info = EM2870_BOARD_KWORLD_350U },
2039         { USB_DEVICE(0xeb1a, 0xe355),
2040                         .driver_info = EM2870_BOARD_KWORLD_355U },
2041         { USB_DEVICE(0xeb1a, 0x2801),
2042                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2043         { USB_DEVICE(0xeb1a, 0xe357),
2044                         .driver_info = EM2870_BOARD_KWORLD_355U },
2045         { USB_DEVICE(0xeb1a, 0xe359),
2046                         .driver_info = EM2870_BOARD_KWORLD_355U },
2047         { USB_DEVICE(0x1b80, 0xe302),
2048                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2049         { USB_DEVICE(0x1b80, 0xe304),
2050                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2051         { USB_DEVICE(0x0ccd, 0x0036),
2052                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2053         { USB_DEVICE(0x0ccd, 0x004c),
2054                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2055         { USB_DEVICE(0x0ccd, 0x004f),
2056                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2057         { USB_DEVICE(0x0ccd, 0x005e),
2058                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2059         { USB_DEVICE(0x0ccd, 0x0042),
2060                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2061         { USB_DEVICE(0x0ccd, 0x0043),
2062                         .driver_info = EM2870_BOARD_TERRATEC_XS },
2063         { USB_DEVICE(0x0ccd, 0x008e),   /* Cinergy HTC USB XS Rev. 1 */
2064                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2065         { USB_DEVICE(0x0ccd, 0x00ac),   /* Cinergy HTC USB XS Rev. 2 */
2066                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2067         { USB_DEVICE(0x0ccd, 0x10a2),   /* H5 Rev. 1 */
2068                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2069         { USB_DEVICE(0x0ccd, 0x10ad),   /* H5 Rev. 2 */
2070                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2071         { USB_DEVICE(0x0ccd, 0x0084),
2072                         .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2073         { USB_DEVICE(0x0ccd, 0x0096),
2074                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2075         { USB_DEVICE(0x0ccd, 0x10AF),
2076                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2077         { USB_DEVICE(0x0ccd, 0x00b2),
2078                         .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2079         { USB_DEVICE(0x0fd9, 0x0033),
2080                         .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2081         { USB_DEVICE(0x185b, 0x2870),
2082                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2083         { USB_DEVICE(0x185b, 0x2041),
2084                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2085         { USB_DEVICE(0x2040, 0x4200),
2086                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2087         { USB_DEVICE(0x2040, 0x4201),
2088                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2089         { USB_DEVICE(0x2040, 0x6500),
2090                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2091         { USB_DEVICE(0x2040, 0x6502),
2092                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2093         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2094                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2095         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
2096                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2097         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
2098                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2099         { USB_DEVICE(0x2040, 0x651f),
2100                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2101         { USB_DEVICE(0x0438, 0xb002),
2102                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2103         { USB_DEVICE(0x2001, 0xf112),
2104                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
2105         { USB_DEVICE(0x2304, 0x0207),
2106                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2107         { USB_DEVICE(0x2304, 0x0208),
2108                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2109         { USB_DEVICE(0x2304, 0x021a),
2110                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2111         { USB_DEVICE(0x2304, 0x0226),
2112                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2113         { USB_DEVICE(0x2304, 0x0227),
2114                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2115         { USB_DEVICE(0x0413, 0x6023),
2116                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2117         { USB_DEVICE(0x093b, 0xa003),
2118                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2119         { USB_DEVICE(0x093b, 0xa005),
2120                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2121         { USB_DEVICE(0x04bb, 0x0515),
2122                         .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2123         { USB_DEVICE(0xeb1a, 0x50a6),
2124                         .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2125         { USB_DEVICE(0x1b80, 0xa340),
2126                         .driver_info = EM2870_BOARD_KWORLD_A340 },
2127         { USB_DEVICE(0x2013, 0x024f),
2128                         .driver_info = EM28174_BOARD_PCTV_290E },
2129         { USB_DEVICE(0x2013, 0x024c),
2130                         .driver_info = EM28174_BOARD_PCTV_460E },
2131         { USB_DEVICE(0x2040, 0x1605),
2132                         .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2133         { USB_DEVICE(0xeb1a, 0x5006),
2134                         .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2135         { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2136                         .driver_info = EM2860_BOARD_EASYCAP },
2137         { USB_DEVICE(0x1b80, 0xe425),
2138                         .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2139         { USB_DEVICE(0x2304, 0x0242),
2140                         .driver_info = EM2884_BOARD_PCTV_510E },
2141         { USB_DEVICE(0x2013, 0x0251),
2142                         .driver_info = EM2884_BOARD_PCTV_520E },
2143         { },
2144 };
2145 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2146
2147 /*
2148  * EEPROM hash table for devices with generic USB IDs
2149  */
2150 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2151         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2152         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2153         {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2154         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2155         {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2156         {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2157         {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2158         {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2159         {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2160 };
2161
2162 /* I2C devicelist hash table for devices with generic USB IDs */
2163 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2164         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2165         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2166         {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2167         {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2168         {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2169         {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2170         {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2171 };
2172
2173 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2174 static unsigned short saa711x_addrs[] = {
2175         0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
2176         0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
2177         I2C_CLIENT_END };
2178
2179 static unsigned short tvp5150_addrs[] = {
2180         0xb8 >> 1,
2181         0xba >> 1,
2182         I2C_CLIENT_END
2183 };
2184
2185 static unsigned short msp3400_addrs[] = {
2186         0x80 >> 1,
2187         0x88 >> 1,
2188         I2C_CLIENT_END
2189 };
2190
2191 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2192 {
2193         int rc = 0;
2194         struct em28xx *dev = ptr;
2195
2196         if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2197                 return 0;
2198
2199         if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2200                 return 0;
2201
2202         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2203
2204         return rc;
2205 }
2206 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2207
2208 static inline void em28xx_set_model(struct em28xx *dev)
2209 {
2210         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2211
2212         /* Those are the default values for the majority of boards
2213            Use those values if not specified otherwise at boards entry
2214          */
2215         if (!dev->board.xclk)
2216                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2217                                   EM28XX_XCLK_FREQUENCY_12MHZ;
2218
2219         if (!dev->board.i2c_speed)
2220                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2221                                        EM28XX_I2C_FREQ_100_KHZ;
2222 }
2223
2224
2225 /* FIXME: Should be replaced by a proper mt9m111 driver */
2226 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2227 {
2228         int i;
2229         unsigned char regs[][3] = {
2230                 { 0x0d, 0x00, 0x01, },  /* reset and use defaults */
2231                 { 0x0d, 0x00, 0x00, },
2232                 { 0x0a, 0x00, 0x21, },
2233                 { 0x21, 0x04, 0x00, },  /* full readout speed, no row/col skipping */
2234         };
2235
2236         for (i = 0; i < ARRAY_SIZE(regs); i++)
2237                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2238
2239         return 0;
2240 }
2241
2242
2243 /* FIXME: Should be replaced by a proper mt9m001 driver */
2244 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2245 {
2246         int i;
2247         unsigned char regs[][3] = {
2248                 { 0x0d, 0x00, 0x01, },
2249                 { 0x0d, 0x00, 0x00, },
2250                 { 0x04, 0x05, 0x00, },  /* hres = 1280 */
2251                 { 0x03, 0x04, 0x00, },  /* vres = 1024 */
2252                 { 0x20, 0x11, 0x00, },
2253                 { 0x06, 0x00, 0x10, },
2254                 { 0x2b, 0x00, 0x24, },
2255                 { 0x2e, 0x00, 0x24, },
2256                 { 0x35, 0x00, 0x24, },
2257                 { 0x2d, 0x00, 0x20, },
2258                 { 0x2c, 0x00, 0x20, },
2259                 { 0x09, 0x0a, 0xd4, },
2260                 { 0x35, 0x00, 0x57, },
2261         };
2262
2263         for (i = 0; i < ARRAY_SIZE(regs); i++)
2264                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2265
2266         return 0;
2267 }
2268
2269 /* HINT method: webcam I2C chips
2270  *
2271  * This method works for webcams with Micron sensors
2272  */
2273 static int em28xx_hint_sensor(struct em28xx *dev)
2274 {
2275         int rc;
2276         char *sensor_name;
2277         unsigned char cmd;
2278         __be16 version_be;
2279         u16 version;
2280
2281         /* Micron sensor detection */
2282         dev->i2c_client.addr = 0xba >> 1;
2283         cmd = 0;
2284         i2c_master_send(&dev->i2c_client, &cmd, 1);
2285         rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2286         if (rc != 2)
2287                 return -EINVAL;
2288
2289         version = be16_to_cpu(version_be);
2290         switch (version) {
2291         case 0x8232:            /* mt9v011 640x480 1.3 Mpix sensor */
2292         case 0x8243:            /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2293                 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2294                 em28xx_set_model(dev);
2295
2296                 sensor_name = "mt9v011";
2297                 dev->em28xx_sensor = EM28XX_MT9V011;
2298                 dev->sensor_xres = 640;
2299                 dev->sensor_yres = 480;
2300                 /*
2301                  * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2302                  * the Silvercrest cam I have here for testing - for higher
2303                  * resolutions, a high clock cause horizontal artifacts, so we
2304                  * need to use a lower xclk frequency.
2305                  * Yet, it would be possible to adjust xclk depending on the
2306                  * desired resolution, since this affects directly the
2307                  * frame rate.
2308                  */
2309                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2310                 dev->sensor_xtal = 4300000;
2311
2312                 /* probably means GRGB 16 bit bayer */
2313                 dev->vinmode = 0x0d;
2314                 dev->vinctl = 0x00;
2315
2316                 break;
2317
2318         case 0x143a:    /* MT9M111 as found in the ECS G200 */
2319                 dev->model = EM2750_BOARD_UNKNOWN;
2320                 em28xx_set_model(dev);
2321
2322                 sensor_name = "mt9m111";
2323                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2324                 dev->em28xx_sensor = EM28XX_MT9M111;
2325                 em28xx_initialize_mt9m111(dev);
2326                 dev->sensor_xres = 640;
2327                 dev->sensor_yres = 512;
2328
2329                 dev->vinmode = 0x0a;
2330                 dev->vinctl = 0x00;
2331
2332                 break;
2333
2334         case 0x8431:
2335                 dev->model = EM2750_BOARD_UNKNOWN;
2336                 em28xx_set_model(dev);
2337
2338                 sensor_name = "mt9m001";
2339                 dev->em28xx_sensor = EM28XX_MT9M001;
2340                 em28xx_initialize_mt9m001(dev);
2341                 dev->sensor_xres = 1280;
2342                 dev->sensor_yres = 1024;
2343
2344                 /* probably means BGGR 16 bit bayer */
2345                 dev->vinmode = 0x0c;
2346                 dev->vinctl = 0x00;
2347
2348                 break;
2349         default:
2350                 printk("Unknown Micron Sensor 0x%04x\n", version);
2351                 return -EINVAL;
2352         }
2353
2354         /* Setup webcam defaults */
2355         em28xx_pre_card_setup(dev);
2356
2357         em28xx_errdev("Sensor is %s, using model %s entry.\n",
2358                       sensor_name, em28xx_boards[dev->model].name);
2359
2360         return 0;
2361 }
2362
2363 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2364  * this won't work for boards with generic PCI IDs
2365  */
2366 static void em28xx_pre_card_setup(struct em28xx *dev)
2367 {
2368         /* Set the initial XCLK and I2C clock values based on the board
2369            definition */
2370         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2371         if (!dev->board.is_em2800)
2372                 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2373         msleep(50);
2374
2375         /* request some modules */
2376         switch (dev->model) {
2377         case EM2861_BOARD_PLEXTOR_PX_TV100U:
2378                 /* Sets the msp34xx I2S speed */
2379                 dev->i2s_speed = 2048000;
2380                 break;
2381         case EM2861_BOARD_KWORLD_PVRTV_300U:
2382         case EM2880_BOARD_KWORLD_DVB_305U:
2383                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2384                 msleep(10);
2385                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2386                 msleep(10);
2387                 break;
2388         case EM2870_BOARD_COMPRO_VIDEOMATE:
2389                 /* TODO: someone can do some cleanup here...
2390                          not everything's needed */
2391                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2392                 msleep(10);
2393                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2394                 msleep(10);
2395                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2396                 mdelay(70);
2397                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2398                 mdelay(70);
2399                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2400                 mdelay(70);
2401                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2402                 mdelay(70);
2403                 break;
2404         case EM2870_BOARD_TERRATEC_XS_MT2060:
2405                 /* this device needs some gpio writes to get the DVB-T
2406                    demod work */
2407                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2408                 mdelay(70);
2409                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2410                 mdelay(70);
2411                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2412                 mdelay(70);
2413                 break;
2414         case EM2870_BOARD_PINNACLE_PCTV_DVB:
2415                 /* this device needs some gpio writes to get the
2416                    DVB-T demod work */
2417                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2418                 mdelay(70);
2419                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2420                 mdelay(70);
2421                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2422                 mdelay(70);
2423                 break;
2424         case EM2820_BOARD_GADMEI_UTV310:
2425         case EM2820_BOARD_MSI_VOX_USB_2:
2426                 /* enables audio for that devices */
2427                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2428                 break;
2429
2430         case EM2882_BOARD_KWORLD_ATSC_315U:
2431                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2432                 msleep(10);
2433                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2434                 msleep(10);
2435                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2436                 msleep(10);
2437                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2438                 msleep(10);
2439                 break;
2440
2441         case EM2860_BOARD_KAIOMY_TVNPC_U2:
2442                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2443                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2444                 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2445                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2446                 msleep(10);
2447                 em28xx_write_regs(dev, 0x08, "\xff", 1);
2448                 msleep(10);
2449                 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2450                 msleep(10);
2451                 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2452
2453                 break;
2454         case EM2860_BOARD_EASYCAP:
2455                 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2456                 break;
2457
2458         case EM2820_BOARD_IODATA_GVMVP_SZ:
2459                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2460                 msleep(70);
2461                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2462                 msleep(10);
2463                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2464                 msleep(70);
2465                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2466                 msleep(70);
2467                 break;
2468         }
2469
2470         em28xx_gpio_set(dev, dev->board.tuner_gpio);
2471         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2472
2473         /* Unlock device */
2474         em28xx_set_mode(dev, EM28XX_SUSPEND);
2475 }
2476
2477 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2478 {
2479         memset(ctl, 0, sizeof(*ctl));
2480
2481         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
2482         ctl->max_len = 64;
2483         ctl->mts = em28xx_boards[dev->model].mts_firmware;
2484
2485         switch (dev->model) {
2486         case EM2880_BOARD_EMPIRE_DUAL_TV:
2487         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2488         case EM2882_BOARD_TERRATEC_HYBRID_XS:
2489                 ctl->demod = XC3028_FE_ZARLINK456;
2490                 break;
2491         case EM2880_BOARD_TERRATEC_HYBRID_XS:
2492         case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2493         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2494                 ctl->demod = XC3028_FE_ZARLINK456;
2495                 break;
2496         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2497         case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2498                 ctl->demod = XC3028_FE_DEFAULT;
2499                 break;
2500         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2501                 ctl->demod = XC3028_FE_DEFAULT;
2502                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2503                 break;
2504         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2505         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2506         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2507                 /* FIXME: Better to specify the needed IF */
2508                 ctl->demod = XC3028_FE_DEFAULT;
2509                 break;
2510         case EM2883_BOARD_KWORLD_HYBRID_330U:
2511         case EM2882_BOARD_DIKOM_DK300:
2512         case EM2882_BOARD_KWORLD_VS_DVBT:
2513                 ctl->demod = XC3028_FE_CHINA;
2514                 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2515                 break;
2516         case EM2882_BOARD_EVGA_INDTUBE:
2517                 ctl->demod = XC3028_FE_CHINA;
2518                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2519                 break;
2520         default:
2521                 ctl->demod = XC3028_FE_OREN538;
2522         }
2523 }
2524
2525 static void em28xx_tuner_setup(struct em28xx *dev)
2526 {
2527         struct tuner_setup           tun_setup;
2528         struct v4l2_frequency        f;
2529
2530         if (dev->tuner_type == TUNER_ABSENT)
2531                 return;
2532
2533         memset(&tun_setup, 0, sizeof(tun_setup));
2534
2535         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2536         tun_setup.tuner_callback = em28xx_tuner_callback;
2537
2538         if (dev->board.radio.type) {
2539                 tun_setup.type = dev->board.radio.type;
2540                 tun_setup.addr = dev->board.radio_addr;
2541
2542                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2543         }
2544
2545         if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2546                 tun_setup.type   = dev->tuner_type;
2547                 tun_setup.addr   = dev->tuner_addr;
2548
2549                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2550         }
2551
2552         if (dev->tda9887_conf) {
2553                 struct v4l2_priv_tun_config tda9887_cfg;
2554
2555                 tda9887_cfg.tuner = TUNER_TDA9887;
2556                 tda9887_cfg.priv = &dev->tda9887_conf;
2557
2558                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2559         }
2560
2561         if (dev->tuner_type == TUNER_XC2028) {
2562                 struct v4l2_priv_tun_config  xc2028_cfg;
2563                 struct xc2028_ctrl           ctl;
2564
2565                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2566                 memset(&ctl, 0, sizeof(ctl));
2567
2568                 em28xx_setup_xc3028(dev, &ctl);
2569
2570                 xc2028_cfg.tuner = TUNER_XC2028;
2571                 xc2028_cfg.priv  = &ctl;
2572
2573                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2574         }
2575
2576         /* configure tuner */
2577         f.tuner = 0;
2578         f.type = V4L2_TUNER_ANALOG_TV;
2579         f.frequency = 9076;     /* just a magic number */
2580         dev->ctl_freq = f.frequency;
2581         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2582 }
2583
2584 static int em28xx_hint_board(struct em28xx *dev)
2585 {
2586         int i;
2587
2588         /* HINT method: EEPROM
2589          *
2590          * This method works only for boards with eeprom.
2591          * Uses a hash of all eeprom bytes. The hash should be
2592          * unique for a vendor/tuner pair.
2593          * There are a high chance that tuners for different
2594          * video standards produce different hashes.
2595          */
2596         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2597                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2598                         dev->model = em28xx_eeprom_hash[i].model;
2599                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2600
2601                         em28xx_errdev("Your board has no unique USB ID.\n");
2602                         em28xx_errdev("A hint were successfully done, "
2603                                       "based on eeprom hash.\n");
2604                         em28xx_errdev("This method is not 100%% failproof.\n");
2605                         em28xx_errdev("If the board were missdetected, "
2606                                       "please email this log to:\n");
2607                         em28xx_errdev("\tV4L Mailing List "
2608                                       " <linux-media@vger.kernel.org>\n");
2609                         em28xx_errdev("Board detected as %s\n",
2610                                       em28xx_boards[dev->model].name);
2611
2612                         return 0;
2613                 }
2614         }
2615
2616         /* HINT method: I2C attached devices
2617          *
2618          * This method works for all boards.
2619          * Uses a hash of i2c scanned devices.
2620          * Devices with the same i2c attached chips will
2621          * be considered equal.
2622          * This method is less precise than the eeprom one.
2623          */
2624
2625         /* user did not request i2c scanning => do it now */
2626         if (!dev->i2c_hash)
2627                 em28xx_do_i2c_scan(dev);
2628
2629         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2630                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2631                         dev->model = em28xx_i2c_hash[i].model;
2632                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
2633                         em28xx_errdev("Your board has no unique USB ID.\n");
2634                         em28xx_errdev("A hint were successfully done, "
2635                                       "based on i2c devicelist hash.\n");
2636                         em28xx_errdev("This method is not 100%% failproof.\n");
2637                         em28xx_errdev("If the board were missdetected, "
2638                                       "please email this log to:\n");
2639                         em28xx_errdev("\tV4L Mailing List "
2640                                       " <linux-media@vger.kernel.org>\n");
2641                         em28xx_errdev("Board detected as %s\n",
2642                                       em28xx_boards[dev->model].name);
2643
2644                         return 0;
2645                 }
2646         }
2647
2648         em28xx_errdev("Your board has no unique USB ID and thus need a "
2649                       "hint to be detected.\n");
2650         em28xx_errdev("You may try to use card=<n> insmod option to "
2651                       "workaround that.\n");
2652         em28xx_errdev("Please send an email with this log to:\n");
2653         em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2654         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2655         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2656
2657         em28xx_errdev("Here is a list of valid choices for the card=<n>"
2658                       " insmod option:\n");
2659         for (i = 0; i < em28xx_bcount; i++) {
2660                 em28xx_errdev("    card=%d -> %s\n",
2661                                 i, em28xx_boards[i].name);
2662         }
2663         return -1;
2664 }
2665
2666 static void em28xx_card_setup(struct em28xx *dev)
2667 {
2668         /*
2669          * If the device can be a webcam, seek for a sensor.
2670          * If sensor is not found, then it isn't a webcam.
2671          */
2672         if (dev->board.is_webcam) {
2673                 if (em28xx_hint_sensor(dev) < 0)
2674                         dev->board.is_webcam = 0;
2675                 else
2676                         dev->progressive = 1;
2677         }
2678
2679         if (!dev->board.is_webcam) {
2680                 switch (dev->model) {
2681                 case EM2820_BOARD_UNKNOWN:
2682                 case EM2800_BOARD_UNKNOWN:
2683                 /*
2684                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2685                  *
2686                  * This occurs because they share identical USB vendor and
2687                  * product IDs.
2688                  *
2689                  * What we do here is look up the EEPROM hash of the K-WORLD
2690                  * and if it is found then we decide that we do not have
2691                  * a DIGIVOX and reset the device to the K-WORLD instead.
2692                  *
2693                  * This solution is only valid if they do not share eeprom
2694                  * hash identities which has not been determined as yet.
2695                  */
2696                 if (em28xx_hint_board(dev) < 0)
2697                         em28xx_errdev("Board not discovered\n");
2698                 else {
2699                         em28xx_set_model(dev);
2700                         em28xx_pre_card_setup(dev);
2701                 }
2702                 break;
2703                 default:
2704                         em28xx_set_model(dev);
2705                 }
2706         }
2707
2708         em28xx_info("Identified as %s (card=%d)\n",
2709                     dev->board.name, dev->model);
2710
2711         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2712         if (em28xx_boards[dev->model].tuner_addr)
2713                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2714
2715         if (em28xx_boards[dev->model].tda9887_conf)
2716                 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2717
2718         /* request some modules */
2719         switch (dev->model) {
2720         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2721         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2722         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2723         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2724         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2725         {
2726                 struct tveeprom tv;
2727 #if defined(CONFIG_MODULES) && defined(MODULE)
2728                 request_module("tveeprom");
2729 #endif
2730                 /* Call first TVeeprom */
2731
2732                 dev->i2c_client.addr = 0xa0 >> 1;
2733                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2734
2735                 dev->tuner_type = tv.tuner_type;
2736
2737                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2738                         dev->i2s_speed = 2048000;
2739                         dev->board.has_msp34xx = 1;
2740                 }
2741                 break;
2742         }
2743         case EM2882_BOARD_KWORLD_ATSC_315U:
2744                 em28xx_write_reg(dev, 0x0d, 0x42);
2745                 msleep(10);
2746                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2747                 msleep(10);
2748                 break;
2749         case EM2820_BOARD_KWORLD_PVRTV2800RF:
2750                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2751                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2752                 break;
2753         case EM2820_BOARD_UNKNOWN:
2754         case EM2800_BOARD_UNKNOWN:
2755                 /*
2756                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2757                  *
2758                  * This occurs because they share identical USB vendor and
2759                  * product IDs.
2760                  *
2761                  * What we do here is look up the EEPROM hash of the K-WORLD
2762                  * and if it is found then we decide that we do not have
2763                  * a DIGIVOX and reset the device to the K-WORLD instead.
2764                  *
2765                  * This solution is only valid if they do not share eeprom
2766                  * hash identities which has not been determined as yet.
2767                  */
2768         case EM2880_BOARD_MSI_DIGIVOX_AD:
2769                 if (!em28xx_hint_board(dev))
2770                         em28xx_set_model(dev);
2771
2772                 /* In cases where we had to use a board hint, the call to
2773                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2774                    so make the call now so the analog GPIOs are set properly
2775                    before probing the i2c bus. */
2776                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2777                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2778                 break;
2779
2780 /*
2781                  * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2782                  *
2783                  * This occurs because they share identical USB vendor and
2784                  * product IDs.
2785                  *
2786                  * What we do here is look up the EEPROM hash of the Dikom
2787                  * and if it is found then we decide that we do not have
2788                  * a Kworld and reset the device to the Dikom instead.
2789                  *
2790                  * This solution is only valid if they do not share eeprom
2791                  * hash identities which has not been determined as yet.
2792                  */
2793         case EM2882_BOARD_KWORLD_VS_DVBT:
2794                 if (!em28xx_hint_board(dev))
2795                         em28xx_set_model(dev);
2796
2797                 /* In cases where we had to use a board hint, the call to
2798                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2799                    so make the call now so the analog GPIOs are set properly
2800                    before probing the i2c bus. */
2801                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2802                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2803                 break;
2804         }
2805
2806         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2807                 em28xx_errdev("\n\n");
2808                 em28xx_errdev("The support for this board weren't "
2809                               "valid yet.\n");
2810                 em28xx_errdev("Please send a report of having this working\n");
2811                 em28xx_errdev("not to V4L mailing list (and/or to other "
2812                                 "addresses)\n\n");
2813         }
2814
2815         /* Allow override tuner type by a module parameter */
2816         if (tuner >= 0)
2817                 dev->tuner_type = tuner;
2818
2819         /* request some modules */
2820         if (dev->board.has_msp34xx)
2821                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2822                         "msp3400", 0, msp3400_addrs);
2823
2824         if (dev->board.decoder == EM28XX_SAA711X)
2825                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2826                         "saa7115_auto", 0, saa711x_addrs);
2827
2828         if (dev->board.decoder == EM28XX_TVP5150)
2829                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2830                         "tvp5150", 0, tvp5150_addrs);
2831
2832         if (dev->em28xx_sensor == EM28XX_MT9V011) {
2833                 struct mt9v011_platform_data pdata;
2834                 struct i2c_board_info mt9v011_info = {
2835                         .type = "mt9v011",
2836                         .addr = 0xba >> 1,
2837                         .platform_data = &pdata,
2838                 };
2839
2840                 pdata.xtal = dev->sensor_xtal;
2841                 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2842                                 &mt9v011_info, NULL);
2843         }
2844
2845
2846         if (dev->board.adecoder == EM28XX_TVAUDIO)
2847                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2848                         "tvaudio", dev->board.tvaudio_addr, NULL);
2849
2850         if (dev->board.tuner_type != TUNER_ABSENT) {
2851                 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2852
2853                 if (dev->board.radio.type)
2854                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2855                                 "tuner", dev->board.radio_addr, NULL);
2856
2857                 if (has_demod)
2858                         v4l2_i2c_new_subdev(&dev->v4l2_dev,
2859                                 &dev->i2c_adap, "tuner",
2860                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2861                 if (dev->tuner_addr == 0) {
2862                         enum v4l2_i2c_tuner_type type =
2863                                 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2864                         struct v4l2_subdev *sd;
2865
2866                         sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2867                                 &dev->i2c_adap, "tuner",
2868                                 0, v4l2_i2c_tuner_addrs(type));
2869
2870                         if (sd)
2871                                 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2872                 } else {
2873                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2874                                 "tuner", dev->tuner_addr, NULL);
2875                 }
2876         }
2877
2878         em28xx_tuner_setup(dev);
2879 }
2880
2881
2882 #if defined(CONFIG_MODULES) && defined(MODULE)
2883 static void request_module_async(struct work_struct *work)
2884 {
2885         struct em28xx *dev = container_of(work,
2886                              struct em28xx, request_module_wk);
2887
2888         if (dev->has_audio_class)
2889                 request_module("snd-usb-audio");
2890         else if (dev->has_alsa_audio)
2891                 request_module("em28xx-alsa");
2892
2893         if (dev->board.has_dvb)
2894                 request_module("em28xx-dvb");
2895         if (dev->board.has_ir_i2c && !disable_ir)
2896                 request_module("em28xx-rc");
2897 }
2898
2899 static void request_modules(struct em28xx *dev)
2900 {
2901         INIT_WORK(&dev->request_module_wk, request_module_async);
2902         schedule_work(&dev->request_module_wk);
2903 }
2904
2905 static void flush_request_modules(struct em28xx *dev)
2906 {
2907         flush_work_sync(&dev->request_module_wk);
2908 }
2909 #else
2910 #define request_modules(dev)
2911 #define flush_request_modules(dev)
2912 #endif /* CONFIG_MODULES */
2913
2914 /*
2915  * em28xx_release_resources()
2916  * unregisters the v4l2,i2c and usb devices
2917  * called when the device gets disconnected or at module unload
2918 */
2919 void em28xx_release_resources(struct em28xx *dev)
2920 {
2921         /*FIXME: I2C IR should be disconnected */
2922
2923         em28xx_release_analog_resources(dev);
2924
2925         em28xx_i2c_unregister(dev);
2926
2927         v4l2_device_unregister(&dev->v4l2_dev);
2928
2929         usb_put_dev(dev->udev);
2930
2931         /* Mark device as unused */
2932         clear_bit(dev->devno, &em28xx_devused);
2933 };
2934
2935 /*
2936  * em28xx_init_dev()
2937  * allocates and inits the device structs, registers i2c bus and v4l device
2938  */
2939 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2940                            struct usb_interface *interface,
2941                            int minor)
2942 {
2943         int retval;
2944
2945         dev->udev = udev;
2946         mutex_init(&dev->ctrl_urb_lock);
2947         spin_lock_init(&dev->slock);
2948
2949         dev->em28xx_write_regs = em28xx_write_regs;
2950         dev->em28xx_read_reg = em28xx_read_reg;
2951         dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2952         dev->em28xx_write_regs_req = em28xx_write_regs_req;
2953         dev->em28xx_read_reg_req = em28xx_read_reg_req;
2954         dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2955
2956         em28xx_set_model(dev);
2957
2958         /* Set the default GPO/GPIO for legacy devices */
2959         dev->reg_gpo_num = EM2880_R04_GPO;
2960         dev->reg_gpio_num = EM28XX_R08_GPIO;
2961
2962         dev->wait_after_write = 5;
2963
2964         /* Based on the Chip ID, set the device configuration */
2965         retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2966         if (retval > 0) {
2967                 dev->chip_id = retval;
2968
2969                 switch (dev->chip_id) {
2970                 case CHIP_ID_EM2800:
2971                         em28xx_info("chip ID is em2800\n");
2972                         break;
2973                 case CHIP_ID_EM2710:
2974                         em28xx_info("chip ID is em2710\n");
2975                         break;
2976                 case CHIP_ID_EM2750:
2977                         em28xx_info("chip ID is em2750\n");
2978                         break;
2979                 case CHIP_ID_EM2820:
2980                         em28xx_info("chip ID is em2820 (or em2710)\n");
2981                         break;
2982                 case CHIP_ID_EM2840:
2983                         em28xx_info("chip ID is em2840\n");
2984                         break;
2985                 case CHIP_ID_EM2860:
2986                         em28xx_info("chip ID is em2860\n");
2987                         break;
2988                 case CHIP_ID_EM2870:
2989                         em28xx_info("chip ID is em2870\n");
2990                         dev->wait_after_write = 0;
2991                         break;
2992                 case CHIP_ID_EM2874:
2993                         em28xx_info("chip ID is em2874\n");
2994                         dev->reg_gpio_num = EM2874_R80_GPIO;
2995                         dev->wait_after_write = 0;
2996                         break;
2997                 case CHIP_ID_EM28174:
2998                         em28xx_info("chip ID is em28174\n");
2999                         dev->reg_gpio_num = EM2874_R80_GPIO;
3000                         dev->wait_after_write = 0;
3001                         break;
3002                 case CHIP_ID_EM2883:
3003                         em28xx_info("chip ID is em2882/em2883\n");
3004                         dev->wait_after_write = 0;
3005                         break;
3006                 case CHIP_ID_EM2884:
3007                         em28xx_info("chip ID is em2884\n");
3008                         dev->reg_gpio_num = EM2874_R80_GPIO;
3009                         dev->wait_after_write = 0;
3010                         break;
3011                 default:
3012                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
3013                 }
3014         }
3015
3016         if (dev->is_audio_only) {
3017                 retval = em28xx_audio_setup(dev);
3018                 if (retval)
3019                         return -ENODEV;
3020                 em28xx_init_extension(dev);
3021
3022                 return 0;
3023         }
3024
3025         /* Prepopulate cached GPO register content */
3026         retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3027         if (retval >= 0)
3028                 dev->reg_gpo = retval;
3029
3030         em28xx_pre_card_setup(dev);
3031
3032         if (!dev->board.is_em2800) {
3033                 /* Resets I2C speed */
3034                 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3035                 if (retval < 0) {
3036                         em28xx_errdev("%s: em28xx_write_reg failed!"
3037                                       " retval [%d]\n",
3038                                       __func__, retval);
3039                         return retval;
3040                 }
3041         }
3042
3043         retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3044         if (retval < 0) {
3045                 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3046                 return retval;
3047         }
3048
3049         /* register i2c bus */
3050         retval = em28xx_i2c_register(dev);
3051         if (retval < 0) {
3052                 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3053                         __func__, retval);
3054                 goto unregister_dev;
3055         }
3056
3057         /*
3058          * Default format, used for tvp5150 or saa711x output formats
3059          */
3060         dev->vinmode = 0x10;
3061         dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
3062                        EM28XX_VINCTRL_CCIR656_ENABLE;
3063
3064         /* Do board specific init and eeprom reading */
3065         em28xx_card_setup(dev);
3066
3067         /* Configure audio */
3068         retval = em28xx_audio_setup(dev);
3069         if (retval < 0) {
3070                 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3071                         __func__, retval);
3072                 goto fail;
3073         }
3074
3075         /* wake i2c devices */
3076         em28xx_wake_i2c(dev);
3077
3078         /* init video dma queues */
3079         INIT_LIST_HEAD(&dev->vidq.active);
3080         INIT_LIST_HEAD(&dev->vbiq.active);
3081
3082         if (dev->board.has_msp34xx) {
3083                 /* Send a reset to other chips via gpio */
3084                 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3085                 if (retval < 0) {
3086                         em28xx_errdev("%s: em28xx_write_reg - "
3087                                       "msp34xx(1) failed! error [%d]\n",
3088                                       __func__, retval);
3089                         goto fail;
3090                 }
3091                 msleep(3);
3092
3093                 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3094                 if (retval < 0) {
3095                         em28xx_errdev("%s: em28xx_write_reg - "
3096                                       "msp34xx(2) failed! error [%d]\n",
3097                                       __func__, retval);
3098                         goto fail;
3099                 }
3100                 msleep(3);
3101         }
3102
3103         retval = em28xx_register_analog_devices(dev);
3104         if (retval < 0) {
3105                 goto fail;
3106         }
3107
3108         /* Save some power by putting tuner to sleep */
3109         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3110
3111         return 0;
3112
3113 fail:
3114         em28xx_i2c_unregister(dev);
3115
3116 unregister_dev:
3117         v4l2_device_unregister(&dev->v4l2_dev);
3118
3119         return retval;
3120 }
3121
3122 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3123 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3124
3125 /*
3126  * em28xx_usb_probe()
3127  * checks for supported devices
3128  */
3129 static int em28xx_usb_probe(struct usb_interface *interface,
3130                             const struct usb_device_id *id)
3131 {
3132         struct usb_device *udev;
3133         struct em28xx *dev = NULL;
3134         int retval;
3135         bool has_audio = false, has_video = false, has_dvb = false;
3136         int i, nr;
3137         const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3138         char *speed;
3139
3140         udev = usb_get_dev(interface_to_usbdev(interface));
3141
3142         /* Check to see next free device and mark as used */
3143         do {
3144                 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3145                 if (nr >= EM28XX_MAXBOARDS) {
3146                         /* No free device slots */
3147                         printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3148                                         EM28XX_MAXBOARDS);
3149                         retval = -ENOMEM;
3150                         goto err_no_slot;
3151                 }
3152         } while (test_and_set_bit(nr, &em28xx_devused));
3153
3154         /* Don't register audio interfaces */
3155         if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3156                 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3157                         "interface %i, class %i\n",
3158                         le16_to_cpu(udev->descriptor.idVendor),
3159                         le16_to_cpu(udev->descriptor.idProduct),
3160                         ifnum,
3161                         interface->altsetting[0].desc.bInterfaceClass);
3162
3163                 retval = -ENODEV;
3164                 goto err;
3165         }
3166
3167         /* allocate memory for our device state and initialize it */
3168         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3169         if (dev == NULL) {
3170                 em28xx_err(DRIVER_NAME ": out of memory!\n");
3171                 retval = -ENOMEM;
3172                 goto err;
3173         }
3174
3175         /* compute alternate max packet sizes */
3176         dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3177                                         interface->num_altsetting, GFP_KERNEL);
3178         if (dev->alt_max_pkt_size == NULL) {
3179                 em28xx_errdev("out of memory!\n");
3180                 kfree(dev);
3181                 retval = -ENOMEM;
3182                 goto err;
3183         }
3184
3185         /* Get endpoints */
3186         for (i = 0; i < interface->num_altsetting; i++) {
3187                 int ep;
3188
3189                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3190                         const struct usb_endpoint_descriptor *e;
3191                         int sizedescr, size;
3192
3193                         e = &interface->altsetting[i].endpoint[ep].desc;
3194
3195                         sizedescr = le16_to_cpu(e->wMaxPacketSize);
3196                         size = sizedescr & 0x7ff;
3197
3198                         if (udev->speed == USB_SPEED_HIGH)
3199                                 size = size * hb_mult(sizedescr);
3200
3201                         if (usb_endpoint_xfer_isoc(e) &&
3202                             usb_endpoint_dir_in(e)) {
3203                                 switch (e->bEndpointAddress) {
3204                                 case EM28XX_EP_AUDIO:
3205                                         has_audio = true;
3206                                         break;
3207                                 case EM28XX_EP_ANALOG:
3208                                         has_video = true;
3209                                         dev->alt_max_pkt_size[i] = size;
3210                                         break;
3211                                 case EM28XX_EP_DIGITAL:
3212                                         has_dvb = true;
3213                                         if (size > dev->dvb_max_pkt_size) {
3214                                                 dev->dvb_max_pkt_size = size;
3215                                                 dev->dvb_alt = i;
3216                                         }
3217                                         break;
3218                                 }
3219                         }
3220                 }
3221         }
3222
3223         if (!(has_audio || has_video || has_dvb)) {
3224                 retval = -ENODEV;
3225                 goto err_free;
3226         }
3227
3228         switch (udev->speed) {
3229         case USB_SPEED_LOW:
3230                 speed = "1.5";
3231                 break;
3232         case USB_SPEED_UNKNOWN:
3233         case USB_SPEED_FULL:
3234                 speed = "12";
3235                 break;
3236         case USB_SPEED_HIGH:
3237                 speed = "480";
3238                 break;
3239         default:
3240                 speed = "unknown";
3241         }
3242
3243         printk(KERN_INFO DRIVER_NAME
3244                 ": New device %s %s @ %s Mbps "
3245                 "(%04x:%04x, interface %d, class %d)\n",
3246                 udev->manufacturer ? udev->manufacturer : "",
3247                 udev->product ? udev->product : "",
3248                 speed,
3249                 le16_to_cpu(udev->descriptor.idVendor),
3250                 le16_to_cpu(udev->descriptor.idProduct),
3251                 ifnum,
3252                 interface->altsetting->desc.bInterfaceNumber);
3253
3254         if (has_audio)
3255                 printk(KERN_INFO DRIVER_NAME
3256                        ": Audio Vendor Class interface %i found\n",
3257                        ifnum);
3258         if (has_video)
3259                 printk(KERN_INFO DRIVER_NAME
3260                        ": Video interface %i found\n",
3261                        ifnum);
3262         if (has_dvb)
3263                 printk(KERN_INFO DRIVER_NAME
3264                        ": DVB interface %i found\n",
3265                        ifnum);
3266
3267         /*
3268          * Make sure we have 480 Mbps of bandwidth, otherwise things like
3269          * video stream wouldn't likely work, since 12 Mbps is generally
3270          * not enough even for most Digital TV streams.
3271          */
3272         if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3273                 printk(DRIVER_NAME ": Device initialization failed.\n");
3274                 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3275                        " USB 2.0 port.\n");
3276                 retval = -ENODEV;
3277                 goto err_free;
3278         }
3279
3280         snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3281         dev->devno = nr;
3282         dev->model = id->driver_info;
3283         dev->alt   = -1;
3284         dev->is_audio_only = has_audio && !(has_video || has_dvb);
3285         dev->has_alsa_audio = has_audio;
3286         dev->audio_ifnum = ifnum;
3287
3288         /* Checks if audio is provided by some interface */
3289         for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3290                 struct usb_interface *uif = udev->config->interface[i];
3291                 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3292                         dev->has_audio_class = 1;
3293                         break;
3294                 }
3295         }
3296
3297         dev->num_alt = interface->num_altsetting;
3298
3299         if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3300                 dev->model = card[nr];
3301
3302         /* save our data pointer in this interface device */
3303         usb_set_intfdata(interface, dev);
3304
3305         /* allocate device struct */
3306         mutex_init(&dev->lock);
3307         mutex_lock(&dev->lock);
3308         retval = em28xx_init_dev(dev, udev, interface, nr);
3309         if (retval) {
3310                 goto unlock_and_free;
3311         }
3312
3313         if (has_dvb) {
3314                 /* pre-allocate DVB isoc transfer buffers */
3315                 retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
3316                                            EM28XX_DVB_MAX_PACKETS,
3317                                            EM28XX_DVB_NUM_BUFS,
3318                                            dev->dvb_max_pkt_size);
3319                 if (retval) {
3320                         goto unlock_and_free;
3321                 }
3322         }
3323
3324         request_modules(dev);
3325
3326         /* Should be the last thing to do, to avoid newer udev's to
3327            open the device before fully initializing it
3328          */
3329         mutex_unlock(&dev->lock);
3330
3331         /*
3332          * These extensions can be modules. If the modules are already
3333          * loaded then we can initialise the device now, otherwise we
3334          * will initialise it when the modules load instead.
3335          */
3336         em28xx_init_extension(dev);
3337
3338         return 0;
3339
3340 unlock_and_free:
3341         mutex_unlock(&dev->lock);
3342
3343 err_free:
3344         kfree(dev->alt_max_pkt_size);
3345         kfree(dev);
3346
3347 err:
3348         clear_bit(nr, &em28xx_devused);
3349
3350 err_no_slot:
3351         usb_put_dev(udev);
3352         return retval;
3353 }
3354
3355 /*
3356  * em28xx_usb_disconnect()
3357  * called when the device gets disconnected
3358  * video device will be unregistered on v4l2_close in case it is still open
3359  */
3360 static void em28xx_usb_disconnect(struct usb_interface *interface)
3361 {
3362         struct em28xx *dev;
3363
3364         dev = usb_get_intfdata(interface);
3365         usb_set_intfdata(interface, NULL);
3366
3367         if (!dev)
3368                 return;
3369
3370         if (dev->is_audio_only) {
3371                 mutex_lock(&dev->lock);
3372                 em28xx_close_extension(dev);
3373                 mutex_unlock(&dev->lock);
3374                 return;
3375         }
3376
3377         em28xx_info("disconnecting %s\n", dev->vdev->name);
3378
3379         flush_request_modules(dev);
3380
3381         /* wait until all current v4l2 io is finished then deallocate
3382            resources */
3383         mutex_lock(&dev->lock);
3384
3385         v4l2_device_disconnect(&dev->v4l2_dev);
3386
3387         if (dev->users) {
3388                 em28xx_warn
3389                     ("device %s is open! Deregistration and memory "
3390                      "deallocation are deferred on close.\n",
3391                      video_device_node_name(dev->vdev));
3392
3393                 dev->state |= DEV_MISCONFIGURED;
3394                 em28xx_uninit_isoc(dev, dev->mode);
3395                 dev->state |= DEV_DISCONNECTED;
3396         } else {
3397                 dev->state |= DEV_DISCONNECTED;
3398                 em28xx_release_resources(dev);
3399         }
3400
3401         /* free DVB isoc buffers */
3402         em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
3403
3404         mutex_unlock(&dev->lock);
3405
3406         em28xx_close_extension(dev);
3407
3408         if (!dev->users) {
3409                 kfree(dev->alt_max_pkt_size);
3410                 kfree(dev);
3411         }
3412 }
3413
3414 static struct usb_driver em28xx_usb_driver = {
3415         .name = "em28xx",
3416         .probe = em28xx_usb_probe,
3417         .disconnect = em28xx_usb_disconnect,
3418         .id_table = em28xx_id_table,
3419 };
3420
3421 module_usb_driver(em28xx_usb_driver);