2 * budget-ci.c: driver for the SAA7146 based Budget DVB cards
4 * Compiled from various sources by Michael Hunold <michael@mihu.de>
6 * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM>
7 * partially based on the Siemens DVB driver by Ralph+Marcus Metzler
9 * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * as published by the Free Software Foundation; either version 2
14 * of the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
26 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
29 * the project's page is at http://www.linuxtv.org/
32 #include <linux/module.h>
33 #include <linux/errno.h>
34 #include <linux/slab.h>
35 #include <linux/interrupt.h>
36 #include <linux/spinlock.h>
37 #include <media/rc-core.h>
41 #include "dvb_ca_en50221.h"
45 #include "stb0899_drv.h"
46 #include "stb0899_reg.h"
47 #include "stb0899_cfg.h"
49 #include "stb6100_cfg.h"
55 #include "bsbe1-d01a.h"
57 #define MODULE_NAME "budget_ci"
60 * Regarding DEBIADDR_IR:
61 * Some CI modules hang if random addresses are read.
62 * Using address 0x4000 for the IR read means that we
63 * use the same address as for CI version, which should
66 #define DEBIADDR_IR 0x4000
67 #define DEBIADDR_CICONTROL 0x0000
68 #define DEBIADDR_CIVERSION 0x4000
69 #define DEBIADDR_IO 0x1000
70 #define DEBIADDR_ATTR 0x3000
72 #define CICONTROL_RESET 0x01
73 #define CICONTROL_ENABLETS 0x02
74 #define CICONTROL_CAMDETECT 0x08
76 #define DEBICICTL 0x00420000
77 #define DEBICICAM 0x02420000
79 #define SLOTSTATUS_NONE 1
80 #define SLOTSTATUS_PRESENT 2
81 #define SLOTSTATUS_RESET 4
82 #define SLOTSTATUS_READY 8
83 #define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
85 /* RC5 device wildcard */
86 #define IR_DEVICE_ANY 255
88 static int rc5_device = -1;
89 module_param(rc5_device, int, 0644);
90 MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
93 module_param(ir_debug, int, 0644);
94 MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
96 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
100 struct tasklet_struct msp430_irq_tasklet;
101 char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
106 bool full_rc5; /* Outputs a full RC5 code */
110 struct budget budget;
111 struct tasklet_struct ciintf_irq_tasklet;
114 struct dvb_ca_en50221 ca;
115 struct budget_ci_ir ir;
116 u8 tuner_pll_address; /* used for philips_tdm1316l configs */
119 static void msp430_ir_interrupt(unsigned long data)
121 struct budget_ci *budget_ci = (struct budget_ci *) data;
122 struct rc_dev *dev = budget_ci->ir.dev;
123 u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
126 * The msp430 chip can generate two different bytes, command and device
128 * type1: X1CCCCCC, C = command bits (0 - 63)
129 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
131 * Each signal from the remote control can generate one or more command
132 * bytes and one or more device bytes. For the repeated bytes, the
133 * highest bit (X) is set. The first command byte is always generated
134 * before the first device byte. Other than that, no specific order
135 * seems to apply. To make life interesting, bytes can also be lost.
137 * Only when we have a command and device byte, a keypress is
142 printk("budget_ci: received byte 0x%02x\n", command);
144 /* Remove repeat bit, we use every command */
145 command = command & 0x7f;
147 /* Is this a RC5 command byte? */
148 if (command & 0x40) {
149 budget_ci->ir.have_command = true;
150 budget_ci->ir.ir_key = command & 0x3f;
154 /* It's a RC5 device byte */
155 if (!budget_ci->ir.have_command)
157 budget_ci->ir.have_command = false;
159 if (budget_ci->ir.rc5_device != IR_DEVICE_ANY &&
160 budget_ci->ir.rc5_device != (command & 0x1f))
163 if (budget_ci->ir.full_rc5) {
165 budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key,
166 (command & 0x20) ? 1 : 0);
170 /* FIXME: We should generate complete scancodes for all devices */
171 rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
174 static int msp430_ir_init(struct budget_ci *budget_ci)
176 struct saa7146_dev *saa = budget_ci->budget.dev;
180 dev = rc_allocate_device();
182 printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
186 snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
187 "Budget-CI dvb ir receiver %s", saa->name);
188 snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
189 "pci-%s/ir0", pci_name(saa->pci));
191 dev->driver_name = MODULE_NAME;
192 dev->input_name = budget_ci->ir.name;
193 dev->input_phys = budget_ci->ir.phys;
194 dev->input_id.bustype = BUS_PCI;
195 dev->input_id.version = 1;
196 if (saa->pci->subsystem_vendor) {
197 dev->input_id.vendor = saa->pci->subsystem_vendor;
198 dev->input_id.product = saa->pci->subsystem_device;
200 dev->input_id.vendor = saa->pci->vendor;
201 dev->input_id.product = saa->pci->device;
203 dev->dev.parent = &saa->pci->dev;
206 budget_ci->ir.rc5_device = IR_DEVICE_ANY;
208 budget_ci->ir.rc5_device = rc5_device;
210 /* Select keymap and address */
211 switch (budget_ci->budget.dev->pci->subsystem_device) {
216 /* The hauppauge keymap is a superset of these remotes */
217 dev->map_name = RC_MAP_HAUPPAUGE;
218 budget_ci->ir.full_rc5 = true;
221 budget_ci->ir.rc5_device = 0x1f;
228 /* for the Technotrend 1500 bundled remote */
229 dev->map_name = RC_MAP_TT_1500;
233 dev->map_name = RC_MAP_BUDGET_CI_OLD;
236 if (!budget_ci->ir.full_rc5)
237 dev->scanmask = 0xff;
239 error = rc_register_device(dev);
241 printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
246 budget_ci->ir.dev = dev;
248 tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
249 (unsigned long) budget_ci);
251 SAA7146_IER_ENABLE(saa, MASK_06);
252 saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
257 static void msp430_ir_deinit(struct budget_ci *budget_ci)
259 struct saa7146_dev *saa = budget_ci->budget.dev;
261 SAA7146_IER_DISABLE(saa, MASK_06);
262 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
263 tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
265 rc_unregister_device(budget_ci->ir.dev);
268 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
270 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
275 return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
276 DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0);
279 static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
281 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
286 return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
287 DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0);
290 static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
292 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
297 return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
298 DEBIADDR_IO | (address & 3), 1, 1, 0);
301 static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
303 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
308 return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
309 DEBIADDR_IO | (address & 3), 1, value, 1, 0);
312 static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
314 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
315 struct saa7146_dev *saa = budget_ci->budget.dev;
320 if (budget_ci->ci_irq) {
321 // trigger on RISING edge during reset so we know when READY is re-asserted
322 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
324 budget_ci->slot_status = SLOTSTATUS_RESET;
325 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
327 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
328 CICONTROL_RESET, 1, 0);
330 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
331 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
335 static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
337 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
338 struct saa7146_dev *saa = budget_ci->budget.dev;
343 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
344 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
348 static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
350 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
351 struct saa7146_dev *saa = budget_ci->budget.dev;
357 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
359 tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
360 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
361 tmp | CICONTROL_ENABLETS, 1, 0);
363 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
367 static void ciintf_interrupt(unsigned long data)
369 struct budget_ci *budget_ci = (struct budget_ci *) data;
370 struct saa7146_dev *saa = budget_ci->budget.dev;
373 // ensure we don't get spurious IRQs during initialisation
374 if (!budget_ci->budget.ci_present)
377 // read the CAM status
378 flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
379 if (flags & CICONTROL_CAMDETECT) {
381 // GPIO should be set to trigger on falling edge if a CAM is present
382 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
384 if (budget_ci->slot_status & SLOTSTATUS_NONE) {
386 budget_ci->slot_status = SLOTSTATUS_PRESENT;
387 dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
388 DVB_CA_EN50221_CAMCHANGE_INSERTED);
390 } else if (budget_ci->slot_status & SLOTSTATUS_RESET) {
391 // CAM ready (reset completed)
392 budget_ci->slot_status = SLOTSTATUS_READY;
393 dvb_ca_en50221_camready_irq(&budget_ci->ca, 0);
395 } else if (budget_ci->slot_status & SLOTSTATUS_READY) {
397 dvb_ca_en50221_frda_irq(&budget_ci->ca, 0);
401 // trigger on rising edge if a CAM is not present - when a CAM is inserted, we
402 // only want to get the IRQ when it sets READY. If we trigger on the falling edge,
403 // the CAM might not actually be ready yet.
404 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
406 // generate a CAM removal IRQ if we haven't already
407 if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) {
409 budget_ci->slot_status = SLOTSTATUS_NONE;
410 dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
411 DVB_CA_EN50221_CAMCHANGE_REMOVED);
416 static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
418 struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
421 // ensure we don't get spurious IRQs during initialisation
422 if (!budget_ci->budget.ci_present)
425 // read the CAM status
426 flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
427 if (flags & CICONTROL_CAMDETECT) {
428 // mark it as present if it wasn't before
429 if (budget_ci->slot_status & SLOTSTATUS_NONE) {
430 budget_ci->slot_status = SLOTSTATUS_PRESENT;
433 // during a RESET, we check if we can read from IO memory to see when CAM is ready
434 if (budget_ci->slot_status & SLOTSTATUS_RESET) {
435 if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
436 budget_ci->slot_status = SLOTSTATUS_READY;
440 budget_ci->slot_status = SLOTSTATUS_NONE;
443 if (budget_ci->slot_status != SLOTSTATUS_NONE) {
444 if (budget_ci->slot_status & SLOTSTATUS_READY) {
445 return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
447 return DVB_CA_EN50221_POLL_CAM_PRESENT;
453 static int ciintf_init(struct budget_ci *budget_ci)
455 struct saa7146_dev *saa = budget_ci->budget.dev;
461 memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
464 saa7146_write(saa, MC1, MASK_27 | MASK_11);
466 // test if it is there
467 ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
468 if ((ci_version & 0xa0) != 0xa0) {
473 // determine whether a CAM is present or not
474 flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
475 budget_ci->slot_status = SLOTSTATUS_NONE;
476 if (flags & CICONTROL_CAMDETECT)
477 budget_ci->slot_status = SLOTSTATUS_PRESENT;
479 // version 0xa2 of the CI firmware doesn't generate interrupts
480 if (ci_version == 0xa2) {
482 budget_ci->ci_irq = 0;
484 ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
485 DVB_CA_EN50221_FLAG_IRQ_FR |
486 DVB_CA_EN50221_FLAG_IRQ_DA;
487 budget_ci->ci_irq = 1;
490 // register CI interface
491 budget_ci->ca.owner = THIS_MODULE;
492 budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
493 budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem;
494 budget_ci->ca.read_cam_control = ciintf_read_cam_control;
495 budget_ci->ca.write_cam_control = ciintf_write_cam_control;
496 budget_ci->ca.slot_reset = ciintf_slot_reset;
497 budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
498 budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
499 budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
500 budget_ci->ca.data = budget_ci;
501 if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
503 ca_flags, 1)) != 0) {
504 printk("budget_ci: CI interface detected, but initialisation failed.\n");
509 if (budget_ci->ci_irq) {
510 tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
511 if (budget_ci->slot_status != SLOTSTATUS_NONE) {
512 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
514 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
516 SAA7146_IER_ENABLE(saa, MASK_03);
520 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
521 CICONTROL_RESET, 1, 0);
524 printk("budget_ci: CI interface initialised\n");
525 budget_ci->budget.ci_present = 1;
527 // forge a fake CI IRQ so the CAM state is setup correctly
528 if (budget_ci->ci_irq) {
529 flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
530 if (budget_ci->slot_status != SLOTSTATUS_NONE)
531 flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
532 dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
538 saa7146_write(saa, MC1, MASK_27);
542 static void ciintf_deinit(struct budget_ci *budget_ci)
544 struct saa7146_dev *saa = budget_ci->budget.dev;
546 // disable CI interrupts
547 if (budget_ci->ci_irq) {
548 SAA7146_IER_DISABLE(saa, MASK_03);
549 saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
550 tasklet_kill(&budget_ci->ciintf_irq_tasklet);
554 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
556 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
557 CICONTROL_RESET, 1, 0);
559 // disable TS data stream to CI interface
560 saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
562 // release the CA device
563 dvb_ca_en50221_release(&budget_ci->ca);
566 saa7146_write(saa, MC1, MASK_27);
569 static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
571 struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
573 dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
576 tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
579 ttpci_budget_irq10_handler(dev, isr);
581 if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
582 tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
585 static u8 philips_su1278_tt_inittab[] = {
631 static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
633 stv0299_writereg(fe, 0x0e, 0x44);
634 if (srate >= 10000000) {
635 stv0299_writereg(fe, 0x13, 0x97);
636 stv0299_writereg(fe, 0x14, 0x95);
637 stv0299_writereg(fe, 0x15, 0xc9);
638 stv0299_writereg(fe, 0x17, 0x8c);
639 stv0299_writereg(fe, 0x1a, 0xfe);
640 stv0299_writereg(fe, 0x1c, 0x7f);
641 stv0299_writereg(fe, 0x2d, 0x09);
643 stv0299_writereg(fe, 0x13, 0x99);
644 stv0299_writereg(fe, 0x14, 0x8d);
645 stv0299_writereg(fe, 0x15, 0xce);
646 stv0299_writereg(fe, 0x17, 0x43);
647 stv0299_writereg(fe, 0x1a, 0x1d);
648 stv0299_writereg(fe, 0x1c, 0x12);
649 stv0299_writereg(fe, 0x2d, 0x05);
651 stv0299_writereg(fe, 0x0e, 0x23);
652 stv0299_writereg(fe, 0x0f, 0x94);
653 stv0299_writereg(fe, 0x10, 0x39);
654 stv0299_writereg(fe, 0x15, 0xc9);
656 stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
657 stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
658 stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
663 static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe)
665 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
666 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
669 struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
671 if ((p->frequency < 950000) || (p->frequency > 2150000))
674 div = (p->frequency + (500 - 1)) / 500; /* round correctly */
675 buf[0] = (div >> 8) & 0x7f;
677 buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2;
680 if (p->symbol_rate < 4000000)
683 if (p->frequency < 1250000)
685 else if (p->frequency < 1550000)
687 else if (p->frequency < 2050000)
689 else if (p->frequency < 2150000)
692 if (fe->ops.i2c_gate_ctrl)
693 fe->ops.i2c_gate_ctrl(fe, 1);
694 if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1)
699 static struct stv0299_config philips_su1278_tt_config = {
701 .demod_address = 0x68,
702 .inittab = philips_su1278_tt_inittab,
706 .lock_output = STV0299_LOCKOUTPUT_1,
707 .volt13_op0_op1 = STV0299_VOLT13_OP1,
709 .set_symbol_rate = philips_su1278_tt_set_symbol_rate,
714 static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe)
716 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
717 static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
718 static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
719 struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len =
720 sizeof(td1316_init) };
722 // setup PLL configuration
723 if (fe->ops.i2c_gate_ctrl)
724 fe->ops.i2c_gate_ctrl(fe, 1);
725 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
729 // disable the mc44BC374c (do not check for errors)
730 tuner_msg.addr = 0x65;
731 tuner_msg.buf = disable_mc44BC374c;
732 tuner_msg.len = sizeof(disable_mc44BC374c);
733 if (fe->ops.i2c_gate_ctrl)
734 fe->ops.i2c_gate_ctrl(fe, 1);
735 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) {
736 if (fe->ops.i2c_gate_ctrl)
737 fe->ops.i2c_gate_ctrl(fe, 1);
738 i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1);
744 static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
746 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
747 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
749 struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) };
750 int tuner_frequency = 0;
753 // determine charge pump
754 tuner_frequency = p->frequency + 36130000;
755 if (tuner_frequency < 87000000)
757 else if (tuner_frequency < 130000000)
759 else if (tuner_frequency < 160000000)
761 else if (tuner_frequency < 200000000)
763 else if (tuner_frequency < 290000000)
765 else if (tuner_frequency < 420000000)
767 else if (tuner_frequency < 480000000)
769 else if (tuner_frequency < 620000000)
771 else if (tuner_frequency < 830000000)
773 else if (tuner_frequency < 895000000)
779 if (p->frequency < 49000000)
781 else if (p->frequency < 159000000)
783 else if (p->frequency < 444000000)
785 else if (p->frequency < 861000000)
790 // setup PLL filter and TDA9889
791 switch (p->bandwidth_hz) {
793 tda1004x_writereg(fe, 0x0C, 0x14);
798 tda1004x_writereg(fe, 0x0C, 0x80);
803 tda1004x_writereg(fe, 0x0C, 0x14);
812 // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
813 tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000;
815 // setup tuner buffer
816 tuner_buf[0] = tuner_frequency >> 8;
817 tuner_buf[1] = tuner_frequency & 0xff;
819 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
821 if (fe->ops.i2c_gate_ctrl)
822 fe->ops.i2c_gate_ctrl(fe, 1);
823 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
830 static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe,
831 const struct firmware **fw, char *name)
833 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
835 return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev);
838 static struct tda1004x_config philips_tdm1316l_config = {
840 .demod_address = 0x8,
843 .xtal_freq = TDA10046_XTAL_4M,
844 .agc_config = TDA10046_AGC_DEFAULT,
845 .if_freq = TDA10046_FREQ_3617,
846 .request_firmware = philips_tdm1316l_request_firmware,
849 static struct tda1004x_config philips_tdm1316l_config_invert = {
851 .demod_address = 0x8,
854 .xtal_freq = TDA10046_XTAL_4M,
855 .agc_config = TDA10046_AGC_DEFAULT,
856 .if_freq = TDA10046_FREQ_3617,
857 .request_firmware = philips_tdm1316l_request_firmware,
860 static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
862 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
863 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
865 struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
868 .len = sizeof(tuner_buf) };
869 int tuner_frequency = 0;
872 // determine charge pump
873 tuner_frequency = p->frequency + 36125000;
874 if (tuner_frequency < 87000000)
876 else if (tuner_frequency < 130000000) {
879 } else if (tuner_frequency < 160000000) {
882 } else if (tuner_frequency < 200000000) {
885 } else if (tuner_frequency < 290000000) {
888 } else if (tuner_frequency < 420000000) {
891 } else if (tuner_frequency < 480000000) {
894 } else if (tuner_frequency < 620000000) {
897 } else if (tuner_frequency < 830000000) {
900 } else if (tuner_frequency < 895000000) {
906 // assume PLL filter should always be 8MHz for the moment.
910 tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500;
912 // setup tuner buffer
913 tuner_buf[0] = tuner_frequency >> 8;
914 tuner_buf[1] = tuner_frequency & 0xff;
916 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
919 if (fe->ops.i2c_gate_ctrl)
920 fe->ops.i2c_gate_ctrl(fe, 1);
921 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
926 if (fe->ops.i2c_gate_ctrl)
927 fe->ops.i2c_gate_ctrl(fe, 1);
928 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
936 static u8 dvbc_philips_tdm1316l_inittab[] = {
1029 static struct stv0297_config dvbc_philips_tdm1316l_config = {
1030 .demod_address = 0x1c,
1031 .inittab = dvbc_philips_tdm1316l_inittab,
1033 .stop_during_read = 1,
1036 static struct tda10023_config tda10023_config = {
1037 .demod_address = 0xc,
1046 static struct tda827x_config tda827x_config = {
1050 /* TT S2-3200 DVB-S (STB0899) Inittab */
1051 static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = {
1053 { STB0899_DEV_ID , 0x81 },
1054 { STB0899_DISCNTRL1 , 0x32 },
1055 { STB0899_DISCNTRL2 , 0x80 },
1056 { STB0899_DISRX_ST0 , 0x04 },
1057 { STB0899_DISRX_ST1 , 0x00 },
1058 { STB0899_DISPARITY , 0x00 },
1059 { STB0899_DISSTATUS , 0x20 },
1060 { STB0899_DISF22 , 0x8c },
1061 { STB0899_DISF22RX , 0x9a },
1062 { STB0899_SYSREG , 0x0b },
1063 { STB0899_ACRPRESC , 0x11 },
1064 { STB0899_ACRDIV1 , 0x0a },
1065 { STB0899_ACRDIV2 , 0x05 },
1066 { STB0899_DACR1 , 0x00 },
1067 { STB0899_DACR2 , 0x00 },
1068 { STB0899_OUTCFG , 0x00 },
1069 { STB0899_MODECFG , 0x00 },
1070 { STB0899_IRQSTATUS_3 , 0x30 },
1071 { STB0899_IRQSTATUS_2 , 0x00 },
1072 { STB0899_IRQSTATUS_1 , 0x00 },
1073 { STB0899_IRQSTATUS_0 , 0x00 },
1074 { STB0899_IRQMSK_3 , 0xf3 },
1075 { STB0899_IRQMSK_2 , 0xfc },
1076 { STB0899_IRQMSK_1 , 0xff },
1077 { STB0899_IRQMSK_0 , 0xff },
1078 { STB0899_IRQCFG , 0x00 },
1079 { STB0899_I2CCFG , 0x88 },
1080 { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */
1081 { STB0899_IOPVALUE5 , 0x00 },
1082 { STB0899_IOPVALUE4 , 0x20 },
1083 { STB0899_IOPVALUE3 , 0xc9 },
1084 { STB0899_IOPVALUE2 , 0x90 },
1085 { STB0899_IOPVALUE1 , 0x40 },
1086 { STB0899_IOPVALUE0 , 0x00 },
1087 { STB0899_GPIO00CFG , 0x82 },
1088 { STB0899_GPIO01CFG , 0x82 },
1089 { STB0899_GPIO02CFG , 0x82 },
1090 { STB0899_GPIO03CFG , 0x82 },
1091 { STB0899_GPIO04CFG , 0x82 },
1092 { STB0899_GPIO05CFG , 0x82 },
1093 { STB0899_GPIO06CFG , 0x82 },
1094 { STB0899_GPIO07CFG , 0x82 },
1095 { STB0899_GPIO08CFG , 0x82 },
1096 { STB0899_GPIO09CFG , 0x82 },
1097 { STB0899_GPIO10CFG , 0x82 },
1098 { STB0899_GPIO11CFG , 0x82 },
1099 { STB0899_GPIO12CFG , 0x82 },
1100 { STB0899_GPIO13CFG , 0x82 },
1101 { STB0899_GPIO14CFG , 0x82 },
1102 { STB0899_GPIO15CFG , 0x82 },
1103 { STB0899_GPIO16CFG , 0x82 },
1104 { STB0899_GPIO17CFG , 0x82 },
1105 { STB0899_GPIO18CFG , 0x82 },
1106 { STB0899_GPIO19CFG , 0x82 },
1107 { STB0899_GPIO20CFG , 0x82 },
1108 { STB0899_SDATCFG , 0xb8 },
1109 { STB0899_SCLTCFG , 0xba },
1110 { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
1111 { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
1112 { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
1113 { STB0899_DIRCLKCFG , 0x82 },
1114 { STB0899_CLKOUT27CFG , 0x7e },
1115 { STB0899_STDBYCFG , 0x82 },
1116 { STB0899_CS0CFG , 0x82 },
1117 { STB0899_CS1CFG , 0x82 },
1118 { STB0899_DISEQCOCFG , 0x20 },
1119 { STB0899_GPIO32CFG , 0x82 },
1120 { STB0899_GPIO33CFG , 0x82 },
1121 { STB0899_GPIO34CFG , 0x82 },
1122 { STB0899_GPIO35CFG , 0x82 },
1123 { STB0899_GPIO36CFG , 0x82 },
1124 { STB0899_GPIO37CFG , 0x82 },
1125 { STB0899_GPIO38CFG , 0x82 },
1126 { STB0899_GPIO39CFG , 0x82 },
1127 { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
1128 { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
1129 { STB0899_FILTCTRL , 0x00 },
1130 { STB0899_SYSCTRL , 0x00 },
1131 { STB0899_STOPCLK1 , 0x20 },
1132 { STB0899_STOPCLK2 , 0x00 },
1133 { STB0899_INTBUFSTATUS , 0x00 },
1134 { STB0899_INTBUFCTRL , 0x0a },
1138 static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = {
1139 { STB0899_DEMOD , 0x00 },
1140 { STB0899_RCOMPC , 0xc9 },
1141 { STB0899_AGC1CN , 0x41 },
1142 { STB0899_AGC1REF , 0x10 },
1143 { STB0899_RTC , 0x7a },
1144 { STB0899_TMGCFG , 0x4e },
1145 { STB0899_AGC2REF , 0x34 },
1146 { STB0899_TLSR , 0x84 },
1147 { STB0899_CFD , 0xc7 },
1148 { STB0899_ACLC , 0x87 },
1149 { STB0899_BCLC , 0x94 },
1150 { STB0899_EQON , 0x41 },
1151 { STB0899_LDT , 0xdd },
1152 { STB0899_LDT2 , 0xc9 },
1153 { STB0899_EQUALREF , 0xb4 },
1154 { STB0899_TMGRAMP , 0x10 },
1155 { STB0899_TMGTHD , 0x30 },
1156 { STB0899_IDCCOMP , 0xfb },
1157 { STB0899_QDCCOMP , 0x03 },
1158 { STB0899_POWERI , 0x3b },
1159 { STB0899_POWERQ , 0x3d },
1160 { STB0899_RCOMP , 0x81 },
1161 { STB0899_AGCIQIN , 0x80 },
1162 { STB0899_AGC2I1 , 0x04 },
1163 { STB0899_AGC2I2 , 0xf5 },
1164 { STB0899_TLIR , 0x25 },
1165 { STB0899_RTF , 0x80 },
1166 { STB0899_DSTATUS , 0x00 },
1167 { STB0899_LDI , 0xca },
1168 { STB0899_CFRM , 0xf1 },
1169 { STB0899_CFRL , 0xf3 },
1170 { STB0899_NIRM , 0x2a },
1171 { STB0899_NIRL , 0x05 },
1172 { STB0899_ISYMB , 0x17 },
1173 { STB0899_QSYMB , 0xfa },
1174 { STB0899_SFRH , 0x2f },
1175 { STB0899_SFRM , 0x68 },
1176 { STB0899_SFRL , 0x40 },
1177 { STB0899_SFRUPH , 0x2f },
1178 { STB0899_SFRUPM , 0x68 },
1179 { STB0899_SFRUPL , 0x40 },
1180 { STB0899_EQUAI1 , 0xfd },
1181 { STB0899_EQUAQ1 , 0x04 },
1182 { STB0899_EQUAI2 , 0x0f },
1183 { STB0899_EQUAQ2 , 0xff },
1184 { STB0899_EQUAI3 , 0xdf },
1185 { STB0899_EQUAQ3 , 0xfa },
1186 { STB0899_EQUAI4 , 0x37 },
1187 { STB0899_EQUAQ4 , 0x0d },
1188 { STB0899_EQUAI5 , 0xbd },
1189 { STB0899_EQUAQ5 , 0xf7 },
1190 { STB0899_DSTATUS2 , 0x00 },
1191 { STB0899_VSTATUS , 0x00 },
1192 { STB0899_VERROR , 0xff },
1193 { STB0899_IQSWAP , 0x2a },
1194 { STB0899_ECNT1M , 0x00 },
1195 { STB0899_ECNT1L , 0x00 },
1196 { STB0899_ECNT2M , 0x00 },
1197 { STB0899_ECNT2L , 0x00 },
1198 { STB0899_ECNT3M , 0x00 },
1199 { STB0899_ECNT3L , 0x00 },
1200 { STB0899_FECAUTO1 , 0x06 },
1201 { STB0899_FECM , 0x01 },
1202 { STB0899_VTH12 , 0xf0 },
1203 { STB0899_VTH23 , 0xa0 },
1204 { STB0899_VTH34 , 0x78 },
1205 { STB0899_VTH56 , 0x4e },
1206 { STB0899_VTH67 , 0x48 },
1207 { STB0899_VTH78 , 0x38 },
1208 { STB0899_PRVIT , 0xff },
1209 { STB0899_VITSYNC , 0x19 },
1210 { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
1211 { STB0899_TSULC , 0x42 },
1212 { STB0899_RSLLC , 0x40 },
1213 { STB0899_TSLPL , 0x12 },
1214 { STB0899_TSCFGH , 0x0c },
1215 { STB0899_TSCFGM , 0x00 },
1216 { STB0899_TSCFGL , 0x0c },
1217 { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */
1218 { STB0899_RSSYNCDEL , 0x00 },
1219 { STB0899_TSINHDELH , 0x02 },
1220 { STB0899_TSINHDELM , 0x00 },
1221 { STB0899_TSINHDELL , 0x00 },
1222 { STB0899_TSLLSTKM , 0x00 },
1223 { STB0899_TSLLSTKL , 0x00 },
1224 { STB0899_TSULSTKM , 0x00 },
1225 { STB0899_TSULSTKL , 0xab },
1226 { STB0899_PCKLENUL , 0x00 },
1227 { STB0899_PCKLENLL , 0xcc },
1228 { STB0899_RSPCKLEN , 0xcc },
1229 { STB0899_TSSTATUS , 0x80 },
1230 { STB0899_ERRCTRL1 , 0xb6 },
1231 { STB0899_ERRCTRL2 , 0x96 },
1232 { STB0899_ERRCTRL3 , 0x89 },
1233 { STB0899_DMONMSK1 , 0x27 },
1234 { STB0899_DMONMSK0 , 0x03 },
1235 { STB0899_DEMAPVIT , 0x5c },
1236 { STB0899_PLPARM , 0x1f },
1237 { STB0899_PDELCTRL , 0x48 },
1238 { STB0899_PDELCTRL2 , 0x00 },
1239 { STB0899_BBHCTRL1 , 0x00 },
1240 { STB0899_BBHCTRL2 , 0x00 },
1241 { STB0899_HYSTTHRESH , 0x77 },
1242 { STB0899_MATCSTM , 0x00 },
1243 { STB0899_MATCSTL , 0x00 },
1244 { STB0899_UPLCSTM , 0x00 },
1245 { STB0899_UPLCSTL , 0x00 },
1246 { STB0899_DFLCSTM , 0x00 },
1247 { STB0899_DFLCSTL , 0x00 },
1248 { STB0899_SYNCCST , 0x00 },
1249 { STB0899_SYNCDCSTM , 0x00 },
1250 { STB0899_SYNCDCSTL , 0x00 },
1251 { STB0899_ISI_ENTRY , 0x00 },
1252 { STB0899_ISI_BIT_EN , 0x00 },
1253 { STB0899_MATSTRM , 0x00 },
1254 { STB0899_MATSTRL , 0x00 },
1255 { STB0899_UPLSTRM , 0x00 },
1256 { STB0899_UPLSTRL , 0x00 },
1257 { STB0899_DFLSTRM , 0x00 },
1258 { STB0899_DFLSTRL , 0x00 },
1259 { STB0899_SYNCSTR , 0x00 },
1260 { STB0899_SYNCDSTRM , 0x00 },
1261 { STB0899_SYNCDSTRL , 0x00 },
1262 { STB0899_CFGPDELSTATUS1 , 0x10 },
1263 { STB0899_CFGPDELSTATUS2 , 0x00 },
1264 { STB0899_BBFERRORM , 0x00 },
1265 { STB0899_BBFERRORL , 0x00 },
1266 { STB0899_UPKTERRORM , 0x00 },
1267 { STB0899_UPKTERRORL , 0x00 },
1271 static struct stb0899_config tt3200_config = {
1272 .init_dev = tt3200_stb0899_s1_init_1,
1273 .init_s2_demod = stb0899_s2_init_2,
1274 .init_s1_demod = tt3200_stb0899_s1_init_3,
1275 .init_s2_fec = stb0899_s2_init_4,
1276 .init_tst = stb0899_s1_init_5,
1280 .demod_address = 0x68,
1282 .xtal_freq = 27000000,
1283 .inversion = IQ_SWAP_ON, /* 1 */
1288 .esno_ave = STB0899_DVBS2_ESNO_AVE,
1289 .esno_quant = STB0899_DVBS2_ESNO_QUANT,
1290 .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
1291 .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
1292 .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
1293 .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
1294 .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
1295 .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
1296 .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
1298 .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
1299 .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
1300 .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
1301 .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
1303 .tuner_get_frequency = stb6100_get_frequency,
1304 .tuner_set_frequency = stb6100_set_frequency,
1305 .tuner_set_bandwidth = stb6100_set_bandwidth,
1306 .tuner_get_bandwidth = stb6100_get_bandwidth,
1307 .tuner_set_rfsiggain = NULL
1310 static struct stb6100_config tt3200_stb6100_config = {
1311 .tuner_address = 0x60,
1312 .refclock = 27000000,
1315 static void frontend_init(struct budget_ci *budget_ci)
1317 switch (budget_ci->budget.dev->pci->subsystem_device) {
1318 case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059))
1319 budget_ci->budget.dvb_frontend =
1320 dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap);
1321 if (budget_ci->budget.dvb_frontend) {
1322 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
1323 budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
1328 case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059))
1329 budget_ci->budget.dvb_frontend =
1330 dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap);
1331 if (budget_ci->budget.dvb_frontend) {
1332 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params;
1337 case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
1338 budget_ci->tuner_pll_address = 0x61;
1339 budget_ci->budget.dvb_frontend =
1340 dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
1341 if (budget_ci->budget.dvb_frontend) {
1342 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
1347 case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
1348 budget_ci->tuner_pll_address = 0x63;
1349 budget_ci->budget.dvb_frontend =
1350 dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
1351 if (budget_ci->budget.dvb_frontend) {
1352 budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
1353 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
1358 case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
1359 budget_ci->tuner_pll_address = 0x60;
1360 budget_ci->budget.dvb_frontend =
1361 dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap);
1362 if (budget_ci->budget.dvb_frontend) {
1363 budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
1364 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
1369 case 0x1017: // TT S-1500 PCI
1370 budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap);
1371 if (budget_ci->budget.dvb_frontend) {
1372 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
1373 budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
1375 budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
1376 if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) {
1377 printk("%s: No LNBP21 found!\n", __func__);
1378 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1379 budget_ci->budget.dvb_frontend = NULL;
1384 case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */
1385 budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48);
1386 if (budget_ci->budget.dvb_frontend) {
1387 if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) {
1388 printk(KERN_ERR "%s: No tda827x found!\n", __func__);
1389 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1390 budget_ci->budget.dvb_frontend = NULL;
1395 case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */
1396 budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap);
1397 if (budget_ci->budget.dvb_frontend) {
1398 if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) {
1399 if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
1400 printk(KERN_ERR "%s: No LNBP21 found!\n", __func__);
1401 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1402 budget_ci->budget.dvb_frontend = NULL;
1405 printk(KERN_ERR "%s: No STB6000 found!\n", __func__);
1406 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1407 budget_ci->budget.dvb_frontend = NULL;
1412 case 0x1019: // TT S2-3200 PCI
1414 * NOTE! on some STB0899 versions, the internal PLL takes a longer time
1415 * to settle, aka LOCK. On the older revisions of the chip, we don't see
1416 * this, as a result on the newer chips the entire clock tree, will not
1417 * be stable after a freshly POWER 'ed up situation.
1418 * In this case, we should RESET the STB0899 (Active LOW) and wait for
1419 * PLL stabilization.
1421 * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is
1422 * connected to the SAA7146 GPIO, GPIO2, Pin 142
1424 /* Reset Demodulator */
1425 saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO);
1426 /* Wait for everything to die */
1428 /* Pull it up out of Reset state */
1429 saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI);
1430 /* Wait for PLL to stabilize */
1433 * PLL state should be stable now. Ideally, we should check
1434 * for PLL LOCK status. But well, never mind!
1436 budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap);
1437 if (budget_ci->budget.dvb_frontend) {
1438 if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) {
1439 if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
1440 printk("%s: No LNBP21 found!\n", __func__);
1441 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1442 budget_ci->budget.dvb_frontend = NULL;
1445 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1446 budget_ci->budget.dvb_frontend = NULL;
1453 if (budget_ci->budget.dvb_frontend == NULL) {
1454 printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
1455 budget_ci->budget.dev->pci->vendor,
1456 budget_ci->budget.dev->pci->device,
1457 budget_ci->budget.dev->pci->subsystem_vendor,
1458 budget_ci->budget.dev->pci->subsystem_device);
1460 if (dvb_register_frontend
1461 (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
1462 printk("budget-ci: Frontend registration failed!\n");
1463 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1464 budget_ci->budget.dvb_frontend = NULL;
1469 static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
1471 struct budget_ci *budget_ci;
1474 budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
1480 dprintk(2, "budget_ci: %p\n", budget_ci);
1482 dev->ext_priv = budget_ci;
1484 err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE,
1489 err = msp430_ir_init(budget_ci);
1493 ciintf_init(budget_ci);
1495 budget_ci->budget.dvb_adapter.priv = budget_ci;
1496 frontend_init(budget_ci);
1498 ttpci_budget_init_hooks(&budget_ci->budget);
1503 ttpci_budget_deinit(&budget_ci->budget);
1510 static int budget_ci_detach(struct saa7146_dev *dev)
1512 struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
1513 struct saa7146_dev *saa = budget_ci->budget.dev;
1516 if (budget_ci->budget.ci_present)
1517 ciintf_deinit(budget_ci);
1518 msp430_ir_deinit(budget_ci);
1519 if (budget_ci->budget.dvb_frontend) {
1520 dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
1521 dvb_frontend_detach(budget_ci->budget.dvb_frontend);
1523 err = ttpci_budget_deinit(&budget_ci->budget);
1525 // disable frontend and CI interface
1526 saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
1533 static struct saa7146_extension budget_extension;
1535 MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT);
1536 MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
1537 MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
1538 MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
1539 MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
1540 MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
1541 MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT);
1542 MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT);
1544 static struct pci_device_id pci_tbl[] = {
1545 MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
1546 MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
1547 MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
1548 MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
1549 MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
1550 MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
1551 MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a),
1552 MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019),
1553 MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b),
1559 MODULE_DEVICE_TABLE(pci, pci_tbl);
1561 static struct saa7146_extension budget_extension = {
1562 .name = "budget_ci dvb",
1563 .flags = SAA7146_USE_I2C_IRQ,
1565 .module = THIS_MODULE,
1566 .pci_tbl = &pci_tbl[0],
1567 .attach = budget_ci_attach,
1568 .detach = budget_ci_detach,
1570 .irq_mask = MASK_03 | MASK_06 | MASK_10,
1571 .irq_func = budget_ci_irq,
1574 static int __init budget_ci_init(void)
1576 return saa7146_register_extension(&budget_extension);
1579 static void __exit budget_ci_exit(void)
1581 saa7146_unregister_extension(&budget_extension);
1584 module_init(budget_ci_init);
1585 module_exit(budget_ci_exit);
1587 MODULE_LICENSE("GPL");
1588 MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
1589 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
1590 "budget PCI DVB cards w/ CI-module produced by "
1591 "Siemens, Technotrend, Hauppauge");