Pileus Git - ~andy/linux/blob - drivers/media/i2c/adv7180.c

   1 /*
   2  * adv7180.c Analog Devices ADV7180 video decoder driver
   3  * Copyright (c) 2009 Intel Corporation
   4  * Copyright (C) 2013 Cogent Embedded, Inc.
   5  * Copyright (C) 2013 Renesas Solutions Corp.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/init.h>
  23 #include <linux/errno.h>
  24 #include <linux/kernel.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/i2c.h>
  27 #include <linux/slab.h>
  28 #include <media/v4l2-ioctl.h>
  29 #include <linux/videodev2.h>
  30 #include <media/v4l2-device.h>
  31 #include <media/v4l2-ctrls.h>
  32 #include <linux/mutex.h>
  33
  34 #define ADV7180_INPUT_CONTROL_REG                       0x00
  35 #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM    0x00
  36 #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
  37 #define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM     0x20
  38 #define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_M_SECAM     0x30
  39 #define ADV7180_INPUT_CONTROL_NTSC_J                    0x40
  40 #define ADV7180_INPUT_CONTROL_NTSC_M                    0x50
  41 #define ADV7180_INPUT_CONTROL_PAL60                     0x60
  42 #define ADV7180_INPUT_CONTROL_NTSC_443                  0x70
  43 #define ADV7180_INPUT_CONTROL_PAL_BG                    0x80
  44 #define ADV7180_INPUT_CONTROL_PAL_N                     0x90
  45 #define ADV7180_INPUT_CONTROL_PAL_M                     0xa0
  46 #define ADV7180_INPUT_CONTROL_PAL_M_PED                 0xb0
  47 #define ADV7180_INPUT_CONTROL_PAL_COMB_N                0xc0
  48 #define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED            0xd0
  49 #define ADV7180_INPUT_CONTROL_PAL_SECAM                 0xe0
  50 #define ADV7180_INPUT_CONTROL_PAL_SECAM_PED             0xf0
  51 #define ADV7180_INPUT_CONTROL_INSEL_MASK                0x0f
  52
  53 #define ADV7180_EXTENDED_OUTPUT_CONTROL_REG             0x04
  54 #define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS         0xC5
  55
  56 #define ADV7180_AUTODETECT_ENABLE_REG                   0x07
  57 #define ADV7180_AUTODETECT_DEFAULT                      0x7f
  58 /* Contrast */
  59 #define ADV7180_CON_REG         0x08    /*Unsigned */
  60 #define ADV7180_CON_MIN         0
  61 #define ADV7180_CON_DEF         128
  62 #define ADV7180_CON_MAX         255
  63 /* Brightness*/
  64 #define ADV7180_BRI_REG         0x0a    /*Signed */
  65 #define ADV7180_BRI_MIN         -128
  66 #define ADV7180_BRI_DEF         0
  67 #define ADV7180_BRI_MAX         127
  68 /* Hue */
  69 #define ADV7180_HUE_REG         0x0b    /*Signed, inverted */
  70 #define ADV7180_HUE_MIN         -127
  71 #define ADV7180_HUE_DEF         0
  72 #define ADV7180_HUE_MAX         128
  73
  74 #define ADV7180_ADI_CTRL_REG                            0x0e
  75 #define ADV7180_ADI_CTRL_IRQ_SPACE                      0x20
  76
  77 #define ADV7180_PWR_MAN_REG             0x0f
  78 #define ADV7180_PWR_MAN_ON              0x04
  79 #define ADV7180_PWR_MAN_OFF             0x24
  80 #define ADV7180_PWR_MAN_RES             0x80
  81
  82 #define ADV7180_STATUS1_REG                             0x10
  83 #define ADV7180_STATUS1_IN_LOCK         0x01
  84 #define ADV7180_STATUS1_AUTOD_MASK      0x70
  85 #define ADV7180_STATUS1_AUTOD_NTSM_M_J  0x00
  86 #define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
  87 #define ADV7180_STATUS1_AUTOD_PAL_M     0x20
  88 #define ADV7180_STATUS1_AUTOD_PAL_60    0x30
  89 #define ADV7180_STATUS1_AUTOD_PAL_B_G   0x40
  90 #define ADV7180_STATUS1_AUTOD_SECAM     0x50
  91 #define ADV7180_STATUS1_AUTOD_PAL_COMB  0x60
  92 #define ADV7180_STATUS1_AUTOD_SECAM_525 0x70
  93
  94 #define ADV7180_IDENT_REG 0x11
  95 #define ADV7180_ID_7180 0x18
  96
  97 #define ADV7180_ICONF1_ADI              0x40
  98 #define ADV7180_ICONF1_ACTIVE_LOW       0x01
  99 #define ADV7180_ICONF1_PSYNC_ONLY       0x10
 100 #define ADV7180_ICONF1_ACTIVE_TO_CLR    0xC0
 101 /* Saturation */
 102 #define ADV7180_SD_SAT_CB_REG   0xe3    /*Unsigned */
 103 #define ADV7180_SD_SAT_CR_REG   0xe4    /*Unsigned */
 104 #define ADV7180_SAT_MIN         0
 105 #define ADV7180_SAT_DEF         128
 106 #define ADV7180_SAT_MAX         255
 107
 108 #define ADV7180_IRQ1_LOCK       0x01
 109 #define ADV7180_IRQ1_UNLOCK     0x02
 110 #define ADV7180_ISR1_ADI        0x42
 111 #define ADV7180_ICR1_ADI        0x43
 112 #define ADV7180_IMR1_ADI        0x44
 113 #define ADV7180_IMR2_ADI        0x48
 114 #define ADV7180_IRQ3_AD_CHANGE  0x08
 115 #define ADV7180_ISR3_ADI        0x4A
 116 #define ADV7180_ICR3_ADI        0x4B
 117 #define ADV7180_IMR3_ADI        0x4C
 118 #define ADV7180_IMR4_ADI        0x50
 119
 120 #define ADV7180_NTSC_V_BIT_END_REG      0xE6
 121 #define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND     0x4F
 122
 123 struct adv7180_state {
 124         struct v4l2_ctrl_handler ctrl_hdl;
 125         struct v4l2_subdev      sd;
 126         struct work_struct      work;
 127         struct mutex            mutex; /* mutual excl. when accessing chip */
 128         int                     irq;
 129         v4l2_std_id             curr_norm;
 130         bool                    autodetect;
 131         u8                      input;
 132 };
 133 #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,             \
 134                                             struct adv7180_state,       \
 135                                             ctrl_hdl)->sd)
 136
 137 static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
 138 {
 139         /* in case V4L2_IN_ST_NO_SIGNAL */
 140         if (!(status1 & ADV7180_STATUS1_IN_LOCK))
 141                 return V4L2_STD_UNKNOWN;
 142
 143         switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
 144         case ADV7180_STATUS1_AUTOD_NTSM_M_J:
 145                 return V4L2_STD_NTSC;
 146         case ADV7180_STATUS1_AUTOD_NTSC_4_43:
 147                 return V4L2_STD_NTSC_443;
 148         case ADV7180_STATUS1_AUTOD_PAL_M:
 149                 return V4L2_STD_PAL_M;
 150         case ADV7180_STATUS1_AUTOD_PAL_60:
 151                 return V4L2_STD_PAL_60;
 152         case ADV7180_STATUS1_AUTOD_PAL_B_G:
 153                 return V4L2_STD_PAL;
 154         case ADV7180_STATUS1_AUTOD_SECAM:
 155                 return V4L2_STD_SECAM;
 156         case ADV7180_STATUS1_AUTOD_PAL_COMB:
 157                 return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
 158         case ADV7180_STATUS1_AUTOD_SECAM_525:
 159                 return V4L2_STD_SECAM;
 160         default:
 161                 return V4L2_STD_UNKNOWN;
 162         }
 163 }
 164
 165 static int v4l2_std_to_adv7180(v4l2_std_id std)
 166 {
 167         if (std == V4L2_STD_PAL_60)
 168                 return ADV7180_INPUT_CONTROL_PAL60;
 169         if (std == V4L2_STD_NTSC_443)
 170                 return ADV7180_INPUT_CONTROL_NTSC_443;
 171         if (std == V4L2_STD_PAL_N)
 172                 return ADV7180_INPUT_CONTROL_PAL_N;
 173         if (std == V4L2_STD_PAL_M)
 174                 return ADV7180_INPUT_CONTROL_PAL_M;
 175         if (std == V4L2_STD_PAL_Nc)
 176                 return ADV7180_INPUT_CONTROL_PAL_COMB_N;
 177
 178         if (std & V4L2_STD_PAL)
 179                 return ADV7180_INPUT_CONTROL_PAL_BG;
 180         if (std & V4L2_STD_NTSC)
 181                 return ADV7180_INPUT_CONTROL_NTSC_M;
 182         if (std & V4L2_STD_SECAM)
 183                 return ADV7180_INPUT_CONTROL_PAL_SECAM;
 184
 185         return -EINVAL;
 186 }
 187
 188 static u32 adv7180_status_to_v4l2(u8 status1)
 189 {
 190         if (!(status1 & ADV7180_STATUS1_IN_LOCK))
 191                 return V4L2_IN_ST_NO_SIGNAL;
 192
 193         return 0;
 194 }
 195
 196 static int __adv7180_status(struct i2c_client *client, u32 *status,
 197                             v4l2_std_id *std)
 198 {
 199         int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
 200
 201         if (status1 < 0)
 202                 return status1;
 203
 204         if (status)
 205                 *status = adv7180_status_to_v4l2(status1);
 206         if (std)
 207                 *std = adv7180_std_to_v4l2(status1);
 208
 209         return 0;
 210 }
 211
 212 static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
 213 {
 214         return container_of(sd, struct adv7180_state, sd);
 215 }
 216
 217 static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 218 {
 219         struct adv7180_state *state = to_state(sd);
 220         int err = mutex_lock_interruptible(&state->mutex);
 221         if (err)
 222                 return err;
 223
 224         /* when we are interrupt driven we know the state */
 225         if (!state->autodetect || state->irq > 0)
 226                 *std = state->curr_norm;
 227         else
 228                 err = __adv7180_status(v4l2_get_subdevdata(sd), NULL, std);
 229
 230         mutex_unlock(&state->mutex);
 231         return err;
 232 }
 233
 234 static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
 235                              u32 output, u32 config)
 236 {
 237         struct adv7180_state *state = to_state(sd);
 238         int ret = mutex_lock_interruptible(&state->mutex);
 239         struct i2c_client *client = v4l2_get_subdevdata(sd);
 240
 241         if (ret)
 242                 return ret;
 243
 244         /* We cannot discriminate between LQFP and 40-pin LFCSP, so accept
 245          * all inputs and let the card driver take care of validation
 246          */
 247         if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
 248                 goto out;
 249
 250         ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG);
 251
 252         if (ret < 0)
 253                 goto out;
 254
 255         ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK;
 256         ret = i2c_smbus_write_byte_data(client,
 257                                         ADV7180_INPUT_CONTROL_REG, ret | input);
 258         state->input = input;
 259 out:
 260         mutex_unlock(&state->mutex);
 261         return ret;
 262 }
 263
 264 static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
 265 {
 266         struct adv7180_state *state = to_state(sd);
 267         int ret = mutex_lock_interruptible(&state->mutex);
 268         if (ret)
 269                 return ret;
 270
 271         ret = __adv7180_status(v4l2_get_subdevdata(sd), status, NULL);
 272         mutex_unlock(&state->mutex);
 273         return ret;
 274 }
 275
 276 static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 277 {
 278         struct adv7180_state *state = to_state(sd);
 279         struct i2c_client *client = v4l2_get_subdevdata(sd);
 280         int ret = mutex_lock_interruptible(&state->mutex);
 281         if (ret)
 282                 return ret;
 283
 284         /* all standards -> autodetect */
 285         if (std == V4L2_STD_ALL) {
 286                 ret =
 287                     i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
 288                                 ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
 289                                               | state->input);
 290                 if (ret < 0)
 291                         goto out;
 292
 293                 __adv7180_status(client, NULL, &state->curr_norm);
 294                 state->autodetect = true;
 295         } else {
 296                 ret = v4l2_std_to_adv7180(std);
 297                 if (ret < 0)
 298                         goto out;
 299
 300                 ret = i2c_smbus_write_byte_data(client,
 301                                                 ADV7180_INPUT_CONTROL_REG,
 302                                                 ret | state->input);
 303                 if (ret < 0)
 304                         goto out;
 305
 306                 state->curr_norm = std;
 307                 state->autodetect = false;
 308         }
 309         ret = 0;
 310 out:
 311         mutex_unlock(&state->mutex);
 312         return ret;
 313 }
 314
 315 static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
 316 {
 317         struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
 318         struct adv7180_state *state = to_state(sd);
 319         struct i2c_client *client = v4l2_get_subdevdata(sd);
 320         int ret = mutex_lock_interruptible(&state->mutex);
 321         int val;
 322
 323         if (ret)
 324                 return ret;
 325         val = ctrl->val;
 326         switch (ctrl->id) {
 327         case V4L2_CID_BRIGHTNESS:
 328                 ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
 329                 break;
 330         case V4L2_CID_HUE:
 331                 /*Hue is inverted according to HSL chart */
 332                 ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
 333                 break;
 334         case V4L2_CID_CONTRAST:
 335                 ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
 336                 break;
 337         case V4L2_CID_SATURATION:
 338                 /*
 339                  *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
 340                  *Let's not confuse the user, everybody understands saturation
 341                  */
 342                 ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
 343                                                 val);
 344                 if (ret < 0)
 345                         break;
 346                 ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
 347                                                 val);
 348                 break;
 349         default:
 350                 ret = -EINVAL;
 351         }
 352
 353         mutex_unlock(&state->mutex);
 354         return ret;
 355 }
 356
 357 static const struct v4l2_ctrl_ops adv7180_ctrl_ops = {
 358         .s_ctrl = adv7180_s_ctrl,
 359 };
 360
 361 static int adv7180_init_controls(struct adv7180_state *state)
 362 {
 363         v4l2_ctrl_handler_init(&state->ctrl_hdl, 4);
 364
 365         v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
 366                           V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN,
 367                           ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF);
 368         v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
 369                           V4L2_CID_CONTRAST, ADV7180_CON_MIN,
 370                           ADV7180_CON_MAX, 1, ADV7180_CON_DEF);
 371         v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
 372                           V4L2_CID_SATURATION, ADV7180_SAT_MIN,
 373                           ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF);
 374         v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
 375                           V4L2_CID_HUE, ADV7180_HUE_MIN,
 376                           ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF);
 377         state->sd.ctrl_handler = &state->ctrl_hdl;
 378         if (state->ctrl_hdl.error) {
 379                 int err = state->ctrl_hdl.error;
 380
 381                 v4l2_ctrl_handler_free(&state->ctrl_hdl);
 382                 return err;
 383         }
 384         v4l2_ctrl_handler_setup(&state->ctrl_hdl);
 385
 386         return 0;
 387 }
 388 static void adv7180_exit_controls(struct adv7180_state *state)
 389 {
 390         v4l2_ctrl_handler_free(&state->ctrl_hdl);
 391 }
 392
 393 static int adv7180_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
 394                                  enum v4l2_mbus_pixelcode *code)
 395 {
 396         if (index > 0)
 397                 return -EINVAL;
 398
 399         *code = V4L2_MBUS_FMT_YUYV8_2X8;
 400
 401         return 0;
 402 }
 403
 404 static int adv7180_mbus_fmt(struct v4l2_subdev *sd,
 405                             struct v4l2_mbus_framefmt *fmt)
 406 {
 407         struct adv7180_state *state = to_state(sd);
 408
 409         fmt->code = V4L2_MBUS_FMT_YUYV8_2X8;
 410         fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
 411         fmt->field = V4L2_FIELD_INTERLACED;
 412         fmt->width = 720;
 413         fmt->height = state->curr_norm & V4L2_STD_525_60 ? 480 : 576;
 414
 415         return 0;
 416 }
 417
 418 static int adv7180_g_mbus_config(struct v4l2_subdev *sd,
 419                                  struct v4l2_mbus_config *cfg)
 420 {
 421         /*
 422          * The ADV7180 sensor supports BT.601/656 output modes.
 423          * The BT.656 is default and not yet configurable by s/w.
 424          */
 425         cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
 426                      V4L2_MBUS_DATA_ACTIVE_HIGH;
 427         cfg->type = V4L2_MBUS_BT656;
 428
 429         return 0;
 430 }
 431
 432 static const struct v4l2_subdev_video_ops adv7180_video_ops = {
 433         .querystd = adv7180_querystd,
 434         .g_input_status = adv7180_g_input_status,
 435         .s_routing = adv7180_s_routing,
 436         .enum_mbus_fmt = adv7180_enum_mbus_fmt,
 437         .try_mbus_fmt = adv7180_mbus_fmt,
 438         .g_mbus_fmt = adv7180_mbus_fmt,
 439         .s_mbus_fmt = adv7180_mbus_fmt,
 440         .g_mbus_config = adv7180_g_mbus_config,
 441 };
 442
 443 static const struct v4l2_subdev_core_ops adv7180_core_ops = {
 444         .s_std = adv7180_s_std,
 445 };
 446
 447 static const struct v4l2_subdev_ops adv7180_ops = {
 448         .core = &adv7180_core_ops,
 449         .video = &adv7180_video_ops,
 450 };
 451
 452 static void adv7180_work(struct work_struct *work)
 453 {
 454         struct adv7180_state *state = container_of(work, struct adv7180_state,
 455                                                    work);
 456         struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
 457         u8 isr3;
 458
 459         mutex_lock(&state->mutex);
 460         i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
 461                                   ADV7180_ADI_CTRL_IRQ_SPACE);
 462         isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI);
 463         /* clear */
 464         i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3);
 465         i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0);
 466
 467         if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect)
 468                 __adv7180_status(client, NULL, &state->curr_norm);
 469         mutex_unlock(&state->mutex);
 470
 471         enable_irq(state->irq);
 472 }
 473
 474 static irqreturn_t adv7180_irq(int irq, void *devid)
 475 {
 476         struct adv7180_state *state = devid;
 477
 478         schedule_work(&state->work);
 479
 480         disable_irq_nosync(state->irq);
 481
 482         return IRQ_HANDLED;
 483 }
 484
 485 static int init_device(struct i2c_client *client, struct adv7180_state *state)
 486 {
 487         int ret;
 488
 489         /* Initialize adv7180 */
 490         /* Enable autodetection */
 491         if (state->autodetect) {
 492                 ret =
 493                     i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
 494                                 ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
 495                                               | state->input);
 496                 if (ret < 0)
 497                         return ret;
 498
 499                 ret =
 500                     i2c_smbus_write_byte_data(client,
 501                                               ADV7180_AUTODETECT_ENABLE_REG,
 502                                               ADV7180_AUTODETECT_DEFAULT);
 503                 if (ret < 0)
 504                         return ret;
 505         } else {
 506                 ret = v4l2_std_to_adv7180(state->curr_norm);
 507                 if (ret < 0)
 508                         return ret;
 509
 510                 ret =
 511                     i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
 512                                               ret | state->input);
 513                 if (ret < 0)
 514                         return ret;
 515
 516         }
 517         /* ITU-R BT.656-4 compatible */
 518         ret = i2c_smbus_write_byte_data(client,
 519                         ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
 520                         ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
 521         if (ret < 0)
 522                 return ret;
 523
 524         /* Manually set V bit end position in NTSC mode */
 525         ret = i2c_smbus_write_byte_data(client,
 526                                         ADV7180_NTSC_V_BIT_END_REG,
 527                                         ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
 528         if (ret < 0)
 529                 return ret;
 530
 531         /* read current norm */
 532         __adv7180_status(client, NULL, &state->curr_norm);
 533
 534         /* register for interrupts */
 535         if (state->irq > 0) {
 536                 ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
 537                                   state);
 538                 if (ret)
 539                         return ret;
 540
 541                 ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
 542                                                 ADV7180_ADI_CTRL_IRQ_SPACE);
 543                 if (ret < 0)
 544                         return ret;
 545
 546                 /* config the Interrupt pin to be active low */
 547                 ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
 548                                                 ADV7180_ICONF1_ACTIVE_LOW |
 549                                                 ADV7180_ICONF1_PSYNC_ONLY);
 550                 if (ret < 0)
 551                         return ret;
 552
 553                 ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
 554                 if (ret < 0)
 555                         return ret;
 556
 557                 ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
 558                 if (ret < 0)
 559                         return ret;
 560
 561                 /* enable AD change interrupts interrupts */
 562                 ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
 563                                                 ADV7180_IRQ3_AD_CHANGE);
 564                 if (ret < 0)
 565                         return ret;
 566
 567                 ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
 568                 if (ret < 0)
 569                         return ret;
 570
 571                 ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
 572                                                 0);
 573                 if (ret < 0)
 574                         return ret;
 575         }
 576
 577         return 0;
 578 }
 579
 580 static int adv7180_probe(struct i2c_client *client,
 581                          const struct i2c_device_id *id)
 582 {
 583         struct adv7180_state *state;
 584         struct v4l2_subdev *sd;
 585         int ret;
 586
 587         /* Check if the adapter supports the needed features */
 588         if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 589                 return -EIO;
 590
 591         v4l_info(client, "chip found @ 0x%02x (%s)\n",
 592                  client->addr, client->adapter->name);
 593
 594         state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
 595         if (state == NULL) {
 596                 ret = -ENOMEM;
 597                 goto err;
 598         }
 599
 600         state->irq = client->irq;
 601         INIT_WORK(&state->work, adv7180_work);
 602         mutex_init(&state->mutex);
 603         state->autodetect = true;
 604         state->input = 0;
 605         sd = &state->sd;
 606         v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
 607
 608         ret = adv7180_init_controls(state);
 609         if (ret)
 610                 goto err_unreg_subdev;
 611         ret = init_device(client, state);
 612         if (ret)
 613                 goto err_free_ctrl;
 614         return 0;
 615
 616 err_free_ctrl:
 617         adv7180_exit_controls(state);
 618 err_unreg_subdev:
 619         mutex_destroy(&state->mutex);
 620         v4l2_device_unregister_subdev(sd);
 621 err:
 622         printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
 623         return ret;
 624 }
 625
 626 static int adv7180_remove(struct i2c_client *client)
 627 {
 628         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 629         struct adv7180_state *state = to_state(sd);
 630
 631         if (state->irq > 0) {
 632                 free_irq(client->irq, state);
 633                 if (cancel_work_sync(&state->work)) {
 634                         /*
 635                          * Work was pending, therefore we need to enable
 636                          * IRQ here to balance the disable_irq() done in the
 637                          * interrupt handler.
 638                          */
 639                         enable_irq(state->irq);
 640                 }
 641         }
 642
 643         mutex_destroy(&state->mutex);
 644         v4l2_device_unregister_subdev(sd);
 645         return 0;
 646 }
 647
 648 static const struct i2c_device_id adv7180_id[] = {
 649         {KBUILD_MODNAME, 0},
 650         {},
 651 };
 652
 653 #ifdef CONFIG_PM_SLEEP
 654 static int adv7180_suspend(struct device *dev)
 655 {
 656         struct i2c_client *client = to_i2c_client(dev);
 657         int ret;
 658
 659         ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
 660                                         ADV7180_PWR_MAN_OFF);
 661         if (ret < 0)
 662                 return ret;
 663         return 0;
 664 }
 665
 666 static int adv7180_resume(struct device *dev)
 667 {
 668         struct i2c_client *client = to_i2c_client(dev);
 669         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 670         struct adv7180_state *state = to_state(sd);
 671         int ret;
 672
 673         ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
 674                                         ADV7180_PWR_MAN_ON);
 675         if (ret < 0)
 676                 return ret;
 677         ret = init_device(client, state);
 678         if (ret < 0)
 679                 return ret;
 680         return 0;
 681 }
 682
 683 static SIMPLE_DEV_PM_OPS(adv7180_pm_ops, adv7180_suspend, adv7180_resume);
 684 #define ADV7180_PM_OPS (&adv7180_pm_ops)
 685
 686 #else
 687 #define ADV7180_PM_OPS NULL
 688 #endif
 689
 690 MODULE_DEVICE_TABLE(i2c, adv7180_id);
 691
 692 static struct i2c_driver adv7180_driver = {
 693         .driver = {
 694                    .owner = THIS_MODULE,
 695                    .name = KBUILD_MODNAME,
 696                    .pm = ADV7180_PM_OPS,
 697                    },
 698         .probe = adv7180_probe,
 699         .remove = adv7180_remove,
 700         .id_table = adv7180_id,
 701 };
 702
 703 module_i2c_driver(adv7180_driver);
 704
 705 MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
 706 MODULE_AUTHOR("Mocean Laboratories");
 707 MODULE_LICENSE("GPL v2");