Pileus Git - ~andy/linux/blob - drivers/isdn/i4l/isdn_tty.c

   1 /* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $
   2  *
   3  * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
   4  *
   5  * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
   6  * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
   7  *
   8  * This software may be used and distributed according to the terms
   9  * of the GNU General Public License, incorporated herein by reference.
  10  *
  11  */
  12 #undef ISDN_TTY_STAT_DEBUG
  13
  14 #include <linux/isdn.h>
  15 #include <linux/slab.h>
  16 #include <linux/delay.h>
  17 #include <linux/mutex.h>
  18 #include "isdn_common.h"
  19 #include "isdn_tty.h"
  20 #ifdef CONFIG_ISDN_AUDIO
  21 #include "isdn_audio.h"
  22 #define VBUF 0x3e0
  23 #define VBUFX (VBUF/16)
  24 #endif
  25
  26 #define FIX_FILE_TRANSFER
  27 #define DUMMY_HAYES_AT
  28
  29 /* Prototypes */
  30
  31 static DEFINE_MUTEX(modem_info_mutex);
  32 static int isdn_tty_edit_at(const char *, int, modem_info *);
  33 static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *);
  34 static void isdn_tty_modem_reset_regs(modem_info *, int);
  35 static void isdn_tty_cmd_ATA(modem_info *);
  36 static void isdn_tty_flush_buffer(struct tty_struct *);
  37 static void isdn_tty_modem_result(int, modem_info *);
  38 #ifdef CONFIG_ISDN_AUDIO
  39 static int isdn_tty_countDLE(unsigned char *, int);
  40 #endif
  41
  42 /* Leave this unchanged unless you know what you do! */
  43 #define MODEM_PARANOIA_CHECK
  44 #define MODEM_DO_RESTART
  45
  46 static int bit2si[8] =
  47 {1, 5, 7, 7, 7, 7, 7, 7};
  48 static int si2bit[8] =
  49 {4, 1, 4, 4, 4, 4, 4, 4};
  50
  51 char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
  52
  53
  54 /* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
  55  * to stuff incoming data directly into a tty's flip-buffer. This
  56  * is done to speed up tty-receiving if the receive-queue is empty.
  57  * This routine MUST be called with interrupts off.
  58  * Return:
  59  *  1 = Success
  60  *  0 = Failure, data has to be buffered and later processed by
  61  *      isdn_tty_readmodem().
  62  */
  63 static int
  64 isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
  65 {
  66         int c;
  67         int len;
  68         struct tty_struct *tty;
  69         char last;
  70
  71         if (info->online) {
  72                 if ((tty = info->tty)) {
  73                         if (info->mcr & UART_MCR_RTS) {
  74                                 len = skb->len
  75 #ifdef CONFIG_ISDN_AUDIO
  76                                         + ISDN_AUDIO_SKB_DLECOUNT(skb)
  77 #endif
  78                                         ;
  79
  80                                 c = tty_buffer_request_room(tty, len);
  81                                 if (c >= len) {
  82 #ifdef CONFIG_ISDN_AUDIO
  83                                         if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
  84                                                 int l = skb->len;
  85                                                 unsigned char *dp = skb->data;
  86                                                 while (--l) {
  87                                                         if (*dp == DLE)
  88                                                                 tty_insert_flip_char(tty, DLE, 0);
  89                                                         tty_insert_flip_char(tty, *dp++, 0);
  90                                                 }
  91                                                 if (*dp == DLE)
  92                                                         tty_insert_flip_char(tty, DLE, 0);
  93                                                 last = *dp;
  94                                         } else {
  95 #endif
  96                                                 if (len > 1)
  97                                                         tty_insert_flip_string(tty, skb->data, len - 1);
  98                                                 last = skb->data[len - 1];
  99 #ifdef CONFIG_ISDN_AUDIO
 100                                         }
 101 #endif
 102                                         if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
 103                                                 tty_insert_flip_char(tty, last, 0xFF);
 104                                         else
 105                                                 tty_insert_flip_char(tty, last, TTY_NORMAL);
 106                                         tty_flip_buffer_push(tty);
 107                                         kfree_skb(skb);
 108                                         return 1;
 109                                 }
 110                         }
 111                 }
 112         }
 113         return 0;
 114 }
 115
 116 /* isdn_tty_readmodem() is called periodically from within timer-interrupt.
 117  * It tries getting received data from the receive queue an stuff it into
 118  * the tty's flip-buffer.
 119  */
 120 void
 121 isdn_tty_readmodem(void)
 122 {
 123         int resched = 0;
 124         int midx;
 125         int i;
 126         int r;
 127         struct tty_struct *tty;
 128         modem_info *info;
 129
 130         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
 131                 if ((midx = dev->m_idx[i]) >= 0) {
 132                         info = &dev->mdm.info[midx];
 133                         if (info->online) {
 134                                 r = 0;
 135 #ifdef CONFIG_ISDN_AUDIO
 136                                 isdn_audio_eval_dtmf(info);
 137                                 if ((info->vonline & 1) && (info->emu.vpar[1]))
 138                                         isdn_audio_eval_silence(info);
 139 #endif
 140                                 if ((tty = info->tty)) {
 141                                         if (info->mcr & UART_MCR_RTS) {
 142                                                 /* CISCO AsyncPPP Hack */
 143                                                 if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
 144                                                         r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
 145                                                 else
 146                                                         r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
 147                                                 if (r)
 148                                                         tty_flip_buffer_push(tty);
 149                                         } else
 150                                                 r = 1;
 151                                 } else
 152                                         r = 1;
 153                                 if (r) {
 154                                         info->rcvsched = 0;
 155                                         resched = 1;
 156                                 } else
 157                                         info->rcvsched = 1;
 158                         }
 159                 }
 160         }
 161         if (!resched)
 162                 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
 163 }
 164
 165 int
 166 isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
 167 {
 168         ulong flags;
 169         int midx;
 170 #ifdef CONFIG_ISDN_AUDIO
 171         int ifmt;
 172 #endif
 173         modem_info *info;
 174
 175         if ((midx = dev->m_idx[i]) < 0) {
 176                 /* if midx is invalid, packet is not for tty */
 177                 return 0;
 178         }
 179         info = &dev->mdm.info[midx];
 180 #ifdef CONFIG_ISDN_AUDIO
 181         ifmt = 1;
 182
 183         if ((info->vonline) && (!info->emu.vpar[4]))
 184                 isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
 185         if ((info->vonline & 1) && (info->emu.vpar[1]))
 186                 isdn_audio_calc_silence(info, skb->data, skb->len, ifmt);
 187 #endif
 188         if ((info->online < 2)
 189 #ifdef CONFIG_ISDN_AUDIO
 190             && (!(info->vonline & 1))
 191 #endif
 192                 ) {
 193                 /* If Modem not listening, drop data */
 194                 kfree_skb(skb);
 195                 return 1;
 196         }
 197         if (info->emu.mdmreg[REG_T70] & BIT_T70) {
 198                 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) {
 199                         /* T.70 decoding: throw away the T.70 header (2 or 4 bytes)   */
 200                         if (skb->data[0] == 3) /* pure data packet -> 4 byte headers  */
 201                                 skb_pull(skb, 4);
 202                         else
 203                                 if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr  */
 204                                         skb_pull(skb, 2);
 205                 } else
 206                         /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */
 207                         if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1)))
 208                                 skb_pull(skb, 4);
 209         }
 210 #ifdef CONFIG_ISDN_AUDIO
 211         ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
 212         ISDN_AUDIO_SKB_LOCK(skb) = 0;
 213         if (info->vonline & 1) {
 214                 /* voice conversion/compression */
 215                 switch (info->emu.vpar[3]) {
 216                 case 2:
 217                 case 3:
 218                 case 4:
 219                         /* adpcm
 220                          * Since compressed data takes less
 221                          * space, we can overwrite the buffer.
 222                          */
 223                         skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
 224                                                             ifmt,
 225                                                             skb->data,
 226                                                             skb->data,
 227                                                             skb->len));
 228                         break;
 229                 case 5:
 230                         /* a-law */
 231                         if (!ifmt)
 232                                 isdn_audio_ulaw2alaw(skb->data, skb->len);
 233                         break;
 234                 case 6:
 235                         /* u-law */
 236                         if (ifmt)
 237                                 isdn_audio_alaw2ulaw(skb->data, skb->len);
 238                         break;
 239                 }
 240                 ISDN_AUDIO_SKB_DLECOUNT(skb) =
 241                         isdn_tty_countDLE(skb->data, skb->len);
 242         }
 243 #ifdef CONFIG_ISDN_TTY_FAX
 244         else {
 245                 if (info->faxonline & 2) {
 246                         isdn_tty_fax_bitorder(info, skb);
 247                         ISDN_AUDIO_SKB_DLECOUNT(skb) =
 248                                 isdn_tty_countDLE(skb->data, skb->len);
 249                 }
 250         }
 251 #endif
 252 #endif
 253         /* Try to deliver directly via tty-buf if queue is empty */
 254         spin_lock_irqsave(&info->readlock, flags);
 255         if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
 256                 if (isdn_tty_try_read(info, skb)) {
 257                         spin_unlock_irqrestore(&info->readlock, flags);
 258                         return 1;
 259                 }
 260         /* Direct deliver failed or queue wasn't empty.
 261          * Queue up for later dequeueing via timer-irq.
 262          */
 263         __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb);
 264         dev->drv[di]->rcvcount[channel] +=
 265                 (skb->len
 266 #ifdef CONFIG_ISDN_AUDIO
 267                  + ISDN_AUDIO_SKB_DLECOUNT(skb)
 268 #endif
 269                         );
 270         spin_unlock_irqrestore(&info->readlock, flags);
 271         /* Schedule dequeuing */
 272         if ((dev->modempoll) && (info->rcvsched))
 273                 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
 274         return 1;
 275 }
 276
 277 static void
 278 isdn_tty_cleanup_xmit(modem_info *info)
 279 {
 280         skb_queue_purge(&info->xmit_queue);
 281 #ifdef CONFIG_ISDN_AUDIO
 282         skb_queue_purge(&info->dtmf_queue);
 283 #endif
 284 }
 285
 286 static void
 287 isdn_tty_tint(modem_info *info)
 288 {
 289         struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
 290         int len, slen;
 291
 292         if (!skb)
 293                 return;
 294         len = skb->len;
 295         if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
 296                                            info->isdn_channel, 1, skb)) == len) {
 297                 struct tty_struct *tty = info->tty;
 298                 info->send_outstanding++;
 299                 info->msr &= ~UART_MSR_CTS;
 300                 info->lsr &= ~UART_LSR_TEMT;
 301                 tty_wakeup(tty);
 302                 return;
 303         }
 304         if (slen < 0) {
 305                 /* Error: no channel, already shutdown, or wrong parameter */
 306                 dev_kfree_skb(skb);
 307                 return;
 308         }
 309         skb_queue_head(&info->xmit_queue, skb);
 310 }
 311
 312 #ifdef CONFIG_ISDN_AUDIO
 313 static int
 314 isdn_tty_countDLE(unsigned char *buf, int len)
 315 {
 316         int count = 0;
 317
 318         while (len--)
 319                 if (*buf++ == DLE)
 320                         count++;
 321         return count;
 322 }
 323
 324 /* This routine is called from within isdn_tty_write() to perform
 325  * DLE-decoding when sending audio-data.
 326  */
 327 static int
 328 isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
 329 {
 330         unsigned char *p = &info->xmit_buf[info->xmit_count];
 331         int count = 0;
 332
 333         while (len > 0) {
 334                 if (m->lastDLE) {
 335                         m->lastDLE = 0;
 336                         switch (*p) {
 337                         case DLE:
 338                                 /* Escape code */
 339                                 if (len > 1)
 340                                         memmove(p, p + 1, len - 1);
 341                                 p--;
 342                                 count++;
 343                                 break;
 344                         case ETX:
 345                                 /* End of data */
 346                                 info->vonline |= 4;
 347                                 return count;
 348                         case DC4:
 349                                 /* Abort RX */
 350                                 info->vonline &= ~1;
 351 #ifdef ISDN_DEBUG_MODEM_VOICE
 352                                 printk(KERN_DEBUG
 353                                        "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
 354                                        info->line);
 355 #endif
 356                                 isdn_tty_at_cout("\020\003", info);
 357                                 if (!info->vonline) {
 358 #ifdef ISDN_DEBUG_MODEM_VOICE
 359                                         printk(KERN_DEBUG
 360                                                "DLEdown: send VCON on ttyI%d\n",
 361                                                info->line);
 362 #endif
 363                                         isdn_tty_at_cout("\r\nVCON\r\n", info);
 364                                 }
 365                                 /* Fall through */
 366                         case 'q':
 367                         case 's':
 368                                 /* Silence */
 369                                 if (len > 1)
 370                                         memmove(p, p + 1, len - 1);
 371                                 p--;
 372                                 break;
 373                         }
 374                 } else {
 375                         if (*p == DLE)
 376                                 m->lastDLE = 1;
 377                         else
 378                                 count++;
 379                 }
 380                 p++;
 381                 len--;
 382         }
 383         if (len < 0) {
 384                 printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n");
 385                 return 0;
 386         }
 387         return count;
 388 }
 389
 390 /* This routine is called from within isdn_tty_write() when receiving
 391  * audio-data. It interrupts receiving, if an character other than
 392  * ^S or ^Q is sent.
 393  */
 394 static int
 395 isdn_tty_end_vrx(const char *buf, int c)
 396 {
 397         char ch;
 398
 399         while (c--) {
 400                 ch = *buf;
 401                 if ((ch != 0x11) && (ch != 0x13))
 402                         return 1;
 403                 buf++;
 404         }
 405         return 0;
 406 }
 407
 408 static int voice_cf[7] =
 409 {0, 0, 4, 3, 2, 0, 0};
 410
 411 #endif                          /* CONFIG_ISDN_AUDIO */
 412
 413 /* isdn_tty_senddown() is called either directly from within isdn_tty_write()
 414  * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls
 415  * outgoing data from the tty's xmit-buffer, handles voice-decompression or
 416  * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
 417  */
 418 static void
 419 isdn_tty_senddown(modem_info *info)
 420 {
 421         int buflen;
 422         int skb_res;
 423 #ifdef CONFIG_ISDN_AUDIO
 424         int audio_len;
 425 #endif
 426         struct sk_buff *skb;
 427
 428 #ifdef CONFIG_ISDN_AUDIO
 429         if (info->vonline & 4) {
 430                 info->vonline &= ~6;
 431                 if (!info->vonline) {
 432 #ifdef ISDN_DEBUG_MODEM_VOICE
 433                         printk(KERN_DEBUG
 434                                "senddown: send VCON on ttyI%d\n",
 435                                info->line);
 436 #endif
 437                         isdn_tty_at_cout("\r\nVCON\r\n", info);
 438                 }
 439         }
 440 #endif
 441         if (!(buflen = info->xmit_count))
 442                 return;
 443         if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
 444                 info->msr &= ~UART_MSR_CTS;
 445         info->lsr &= ~UART_LSR_TEMT;
 446         /* info->xmit_count is modified here and in isdn_tty_write().
 447          * So we return here if isdn_tty_write() is in the
 448          * critical section.
 449          */
 450         atomic_inc(&info->xmit_lock);
 451         if (!(atomic_dec_and_test(&info->xmit_lock)))
 452                 return;
 453         if (info->isdn_driver < 0) {
 454                 info->xmit_count = 0;
 455                 return;
 456         }
 457         skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4;
 458 #ifdef CONFIG_ISDN_AUDIO
 459         if (info->vonline & 2)
 460                 audio_len = buflen * voice_cf[info->emu.vpar[3]];
 461         else
 462                 audio_len = 0;
 463         skb = dev_alloc_skb(skb_res + buflen + audio_len);
 464 #else
 465         skb = dev_alloc_skb(skb_res + buflen);
 466 #endif
 467         if (!skb) {
 468                 printk(KERN_WARNING
 469                        "isdn_tty: Out of memory in ttyI%d senddown\n",
 470                        info->line);
 471                 return;
 472         }
 473         skb_reserve(skb, skb_res);
 474         memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
 475         info->xmit_count = 0;
 476 #ifdef CONFIG_ISDN_AUDIO
 477         if (info->vonline & 2) {
 478                 /* For now, ifmt is fixed to 1 (alaw), since this
 479                  * is used with ISDN everywhere in the world, except
 480                  * US, Canada and Japan.
 481                  * Later, when US-ISDN protocols are implemented,
 482                  * this setting will depend on the D-channel protocol.
 483                  */
 484                 int ifmt = 1;
 485
 486                 /* voice conversion/decompression */
 487                 switch (info->emu.vpar[3]) {
 488                 case 2:
 489                 case 3:
 490                 case 4:
 491                         /* adpcm, compatible to ZyXel 1496 modem
 492                          * with ROM revision 6.01
 493                          */
 494                         audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
 495                                                           ifmt,
 496                                                           skb->data,
 497                                                           skb_put(skb, audio_len),
 498                                                           buflen);
 499                         skb_pull(skb, buflen);
 500                         skb_trim(skb, audio_len);
 501                         break;
 502                 case 5:
 503                         /* a-law */
 504                         if (!ifmt)
 505                                 isdn_audio_alaw2ulaw(skb->data,
 506                                                      buflen);
 507                         break;
 508                 case 6:
 509                         /* u-law */
 510                         if (ifmt)
 511                                 isdn_audio_ulaw2alaw(skb->data,
 512                                                      buflen);
 513                         break;
 514                 }
 515         }
 516 #endif                          /* CONFIG_ISDN_AUDIO */
 517         if (info->emu.mdmreg[REG_T70] & BIT_T70) {
 518                 /* Add T.70 simplified header */
 519                 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT)
 520                         memcpy(skb_push(skb, 2), "\1\0", 2);
 521                 else
 522                         memcpy(skb_push(skb, 4), "\1\0\1\0", 4);
 523         }
 524         skb_queue_tail(&info->xmit_queue, skb);
 525 }
 526
 527 /************************************************************
 528  *
 529  * Modem-functions
 530  *
 531  * mostly "stolen" from original Linux-serial.c and friends.
 532  *
 533  ************************************************************/
 534
 535 /* The next routine is called once from within timer-interrupt
 536  * triggered within isdn_tty_modem_ncarrier(). It calls
 537  * isdn_tty_modem_result() to stuff a "NO CARRIER" Message
 538  * into the tty's buffer.
 539  */
 540 static void
 541 isdn_tty_modem_do_ncarrier(unsigned long data)
 542 {
 543         modem_info *info = (modem_info *) data;
 544         isdn_tty_modem_result(RESULT_NO_CARRIER, info);
 545 }
 546
 547 /* Next routine is called, whenever the DTR-signal is raised.
 548  * It checks the ncarrier-flag, and triggers the above routine
 549  * when necessary. The ncarrier-flag is set, whenever DTR goes
 550  * low.
 551  */
 552 static void
 553 isdn_tty_modem_ncarrier(modem_info *info)
 554 {
 555         if (info->ncarrier) {
 556                 info->nc_timer.expires = jiffies + HZ;
 557                 add_timer(&info->nc_timer);
 558         }
 559 }
 560
 561 /*
 562  * return the usage calculated by si and layer 2 protocol
 563  */
 564 static int
 565 isdn_calc_usage(int si, int l2)
 566 {
 567         int usg = ISDN_USAGE_MODEM;
 568
 569 #ifdef CONFIG_ISDN_AUDIO
 570         if (si == 1) {
 571                 switch (l2) {
 572                 case ISDN_PROTO_L2_MODEM:
 573                         usg = ISDN_USAGE_MODEM;
 574                         break;
 575 #ifdef CONFIG_ISDN_TTY_FAX
 576                 case ISDN_PROTO_L2_FAX:
 577                         usg = ISDN_USAGE_FAX;
 578                         break;
 579 #endif
 580                 case ISDN_PROTO_L2_TRANS:
 581                 default:
 582                         usg = ISDN_USAGE_VOICE;
 583                         break;
 584                 }
 585         }
 586 #endif
 587         return (usg);
 588 }
 589
 590 /* isdn_tty_dial() performs dialing of a tty an the necessary
 591  * setup of the lower levels before that.
 592  */
 593 static void
 594 isdn_tty_dial(char *n, modem_info *info, atemu *m)
 595 {
 596         int usg = ISDN_USAGE_MODEM;
 597         int si = 7;
 598         int l2 = m->mdmreg[REG_L2PROT];
 599         u_long flags;
 600         isdn_ctrl cmd;
 601         int i;
 602         int j;
 603
 604         for (j = 7; j >= 0; j--)
 605                 if (m->mdmreg[REG_SI1] & (1 << j)) {
 606                         si = bit2si[j];
 607                         break;
 608                 }
 609         usg = isdn_calc_usage(si, l2);
 610 #ifdef CONFIG_ISDN_AUDIO
 611         if ((si == 1) &&
 612             (l2 != ISDN_PROTO_L2_MODEM)
 613 #ifdef CONFIG_ISDN_TTY_FAX
 614             && (l2 != ISDN_PROTO_L2_FAX)
 615 #endif
 616                 ) {
 617                 l2 = ISDN_PROTO_L2_TRANS;
 618                 usg = ISDN_USAGE_VOICE;
 619         }
 620 #endif
 621         m->mdmreg[REG_SI1I] = si2bit[si];
 622         spin_lock_irqsave(&dev->lock, flags);
 623         i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 624         if (i < 0) {
 625                 spin_unlock_irqrestore(&dev->lock, flags);
 626                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 627         } else {
 628                 info->isdn_driver = dev->drvmap[i];
 629                 info->isdn_channel = dev->chanmap[i];
 630                 info->drv_index = i;
 631                 dev->m_idx[i] = info->line;
 632                 dev->usage[i] |= ISDN_USAGE_OUTGOING;
 633                 info->last_dir = 1;
 634                 strcpy(info->last_num, n);
 635                 isdn_info_update();
 636                 spin_unlock_irqrestore(&dev->lock, flags);
 637                 cmd.driver = info->isdn_driver;
 638                 cmd.arg = info->isdn_channel;
 639                 cmd.command = ISDN_CMD_CLREAZ;
 640                 isdn_command(&cmd);
 641                 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 642                 cmd.driver = info->isdn_driver;
 643                 cmd.command = ISDN_CMD_SETEAZ;
 644                 isdn_command(&cmd);
 645                 cmd.driver = info->isdn_driver;
 646                 cmd.command = ISDN_CMD_SETL2;
 647                 info->last_l2 = l2;
 648                 cmd.arg = info->isdn_channel + (l2 << 8);
 649                 isdn_command(&cmd);
 650                 cmd.driver = info->isdn_driver;
 651                 cmd.command = ISDN_CMD_SETL3;
 652                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 653 #ifdef CONFIG_ISDN_TTY_FAX
 654                 if (l2 == ISDN_PROTO_L2_FAX) {
 655                         cmd.parm.fax = info->fax;
 656                         info->fax->direction = ISDN_TTY_FAX_CONN_OUT;
 657                 }
 658 #endif
 659                 isdn_command(&cmd);
 660                 cmd.driver = info->isdn_driver;
 661                 cmd.arg = info->isdn_channel;
 662                 sprintf(cmd.parm.setup.phone, "%s", n);
 663                 sprintf(cmd.parm.setup.eazmsn, "%s",
 664                         isdn_map_eaz2msn(m->msn, info->isdn_driver));
 665                 cmd.parm.setup.si1 = si;
 666                 cmd.parm.setup.si2 = m->mdmreg[REG_SI2];
 667                 cmd.command = ISDN_CMD_DIAL;
 668                 info->dialing = 1;
 669                 info->emu.carrierwait = 0;
 670                 strcpy(dev->num[i], n);
 671                 isdn_info_update();
 672                 isdn_command(&cmd);
 673                 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
 674         }
 675 }
 676
 677 /* isdn_tty_hangup() disassociates a tty from the real
 678  * ISDN-line (hangup). The usage-status is cleared
 679  * and some cleanup is done also.
 680  */
 681 void
 682 isdn_tty_modem_hup(modem_info *info, int local)
 683 {
 684         isdn_ctrl cmd;
 685         int di, ch;
 686
 687         if (!info)
 688                 return;
 689
 690         di = info->isdn_driver;
 691         ch = info->isdn_channel;
 692         if (di < 0 || ch < 0)
 693                 return;
 694
 695         info->isdn_driver = -1;
 696         info->isdn_channel = -1;
 697
 698 #ifdef ISDN_DEBUG_MODEM_HUP
 699         printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
 700 #endif
 701         info->rcvsched = 0;
 702         isdn_tty_flush_buffer(info->tty);
 703         if (info->online) {
 704                 info->last_lhup = local;
 705                 info->online = 0;
 706                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
 707         }
 708 #ifdef CONFIG_ISDN_AUDIO
 709         info->vonline = 0;
 710 #ifdef CONFIG_ISDN_TTY_FAX
 711         info->faxonline = 0;
 712         info->fax->phase = ISDN_FAX_PHASE_IDLE;
 713 #endif
 714         info->emu.vpar[4] = 0;
 715         info->emu.vpar[5] = 8;
 716         kfree(info->dtmf_state);
 717         info->dtmf_state = NULL;
 718         kfree(info->silence_state);
 719         info->silence_state = NULL;
 720         kfree(info->adpcms);
 721         info->adpcms = NULL;
 722         kfree(info->adpcmr);
 723         info->adpcmr = NULL;
 724 #endif
 725         if ((info->msr & UART_MSR_RI) &&
 726             (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
 727                 isdn_tty_modem_result(RESULT_RUNG, info);
 728         info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
 729         info->lsr |= UART_LSR_TEMT;
 730
 731         if (local) {
 732                 cmd.driver = di;
 733                 cmd.command = ISDN_CMD_HANGUP;
 734                 cmd.arg = ch;
 735                 isdn_command(&cmd);
 736         }
 737
 738         isdn_all_eaz(di, ch);
 739         info->emu.mdmreg[REG_RINGCNT] = 0;
 740         isdn_free_channel(di, ch, 0);
 741
 742         if (info->drv_index >= 0) {
 743                 dev->m_idx[info->drv_index] = -1;
 744                 info->drv_index = -1;
 745         }
 746 }
 747
 748 /*
 749  * Begin of a CAPI like interface, currently used only for
 750  * supplementary service (CAPI 2.0 part III)
 751  */
 752 #include <linux/isdn/capicmd.h>
 753 #include <linux/module.h>
 754
 755 int
 756 isdn_tty_capi_facility(capi_msg *cm) {
 757         return (-1); /* dummy */
 758 }
 759
 760 /* isdn_tty_suspend() tries to suspend the current tty connection
 761  */
 762 static void
 763 isdn_tty_suspend(char *id, modem_info *info, atemu *m)
 764 {
 765         isdn_ctrl cmd;
 766
 767         int l;
 768
 769         if (!info)
 770                 return;
 771
 772 #ifdef ISDN_DEBUG_MODEM_SERVICES
 773         printk(KERN_DEBUG "Msusp ttyI%d\n", info->line);
 774 #endif
 775         l = strlen(id);
 776         if ((info->isdn_driver >= 0)) {
 777                 cmd.parm.cmsg.Length = l + 18;
 778                 cmd.parm.cmsg.Command = CAPI_FACILITY;
 779                 cmd.parm.cmsg.Subcommand = CAPI_REQ;
 780                 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 781                 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
 782                 cmd.parm.cmsg.para[1] = 0;
 783                 cmd.parm.cmsg.para[2] = l + 3;
 784                 cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */
 785                 cmd.parm.cmsg.para[4] = 0;
 786                 cmd.parm.cmsg.para[5] = l;
 787                 strncpy(&cmd.parm.cmsg.para[6], id, l);
 788                 cmd.command = CAPI_PUT_MESSAGE;
 789                 cmd.driver = info->isdn_driver;
 790                 cmd.arg = info->isdn_channel;
 791                 isdn_command(&cmd);
 792         }
 793 }
 794
 795 /* isdn_tty_resume() tries to resume a suspended call
 796  * setup of the lower levels before that. unfortunately here is no
 797  * checking for compatibility of used protocols implemented by Q931
 798  * It does the same things like isdn_tty_dial, the last command
 799  * is different, may be we can merge it.
 800  */
 801
 802 static void
 803 isdn_tty_resume(char *id, modem_info *info, atemu *m)
 804 {
 805         int usg = ISDN_USAGE_MODEM;
 806         int si = 7;
 807         int l2 = m->mdmreg[REG_L2PROT];
 808         isdn_ctrl cmd;
 809         ulong flags;
 810         int i;
 811         int j;
 812         int l;
 813
 814         l = strlen(id);
 815         for (j = 7; j >= 0; j--)
 816                 if (m->mdmreg[REG_SI1] & (1 << j)) {
 817                         si = bit2si[j];
 818                         break;
 819                 }
 820         usg = isdn_calc_usage(si, l2);
 821 #ifdef CONFIG_ISDN_AUDIO
 822         if ((si == 1) &&
 823             (l2 != ISDN_PROTO_L2_MODEM)
 824 #ifdef CONFIG_ISDN_TTY_FAX
 825             && (l2 != ISDN_PROTO_L2_FAX)
 826 #endif
 827                 ) {
 828                 l2 = ISDN_PROTO_L2_TRANS;
 829                 usg = ISDN_USAGE_VOICE;
 830         }
 831 #endif
 832         m->mdmreg[REG_SI1I] = si2bit[si];
 833         spin_lock_irqsave(&dev->lock, flags);
 834         i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 835         if (i < 0) {
 836                 spin_unlock_irqrestore(&dev->lock, flags);
 837                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 838         } else {
 839                 info->isdn_driver = dev->drvmap[i];
 840                 info->isdn_channel = dev->chanmap[i];
 841                 info->drv_index = i;
 842                 dev->m_idx[i] = info->line;
 843                 dev->usage[i] |= ISDN_USAGE_OUTGOING;
 844                 info->last_dir = 1;
 845 //              strcpy(info->last_num, n);
 846                 isdn_info_update();
 847                 spin_unlock_irqrestore(&dev->lock, flags);
 848                 cmd.driver = info->isdn_driver;
 849                 cmd.arg = info->isdn_channel;
 850                 cmd.command = ISDN_CMD_CLREAZ;
 851                 isdn_command(&cmd);
 852                 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 853                 cmd.driver = info->isdn_driver;
 854                 cmd.command = ISDN_CMD_SETEAZ;
 855                 isdn_command(&cmd);
 856                 cmd.driver = info->isdn_driver;
 857                 cmd.command = ISDN_CMD_SETL2;
 858                 info->last_l2 = l2;
 859                 cmd.arg = info->isdn_channel + (l2 << 8);
 860                 isdn_command(&cmd);
 861                 cmd.driver = info->isdn_driver;
 862                 cmd.command = ISDN_CMD_SETL3;
 863                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 864                 isdn_command(&cmd);
 865                 cmd.driver = info->isdn_driver;
 866                 cmd.arg = info->isdn_channel;
 867                 cmd.parm.cmsg.Length = l + 18;
 868                 cmd.parm.cmsg.Command = CAPI_FACILITY;
 869                 cmd.parm.cmsg.Subcommand = CAPI_REQ;
 870                 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 871                 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
 872                 cmd.parm.cmsg.para[1] = 0;
 873                 cmd.parm.cmsg.para[2] = l + 3;
 874                 cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */
 875                 cmd.parm.cmsg.para[4] = 0;
 876                 cmd.parm.cmsg.para[5] = l;
 877                 strncpy(&cmd.parm.cmsg.para[6], id, l);
 878                 cmd.command = CAPI_PUT_MESSAGE;
 879                 info->dialing = 1;
 880 //              strcpy(dev->num[i], n);
 881                 isdn_info_update();
 882                 isdn_command(&cmd);
 883                 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
 884         }
 885 }
 886
 887 /* isdn_tty_send_msg() sends a message to a HL driver
 888  * This is used for hybrid modem cards to send AT commands to it
 889  */
 890
 891 static void
 892 isdn_tty_send_msg(modem_info *info, atemu *m, char *msg)
 893 {
 894         int usg = ISDN_USAGE_MODEM;
 895         int si = 7;
 896         int l2 = m->mdmreg[REG_L2PROT];
 897         isdn_ctrl cmd;
 898         ulong flags;
 899         int i;
 900         int j;
 901         int l;
 902
 903         l = strlen(msg);
 904         if (!l) {
 905                 isdn_tty_modem_result(RESULT_ERROR, info);
 906                 return;
 907         }
 908         for (j = 7; j >= 0; j--)
 909                 if (m->mdmreg[REG_SI1] & (1 << j)) {
 910                         si = bit2si[j];
 911                         break;
 912                 }
 913         usg = isdn_calc_usage(si, l2);
 914 #ifdef CONFIG_ISDN_AUDIO
 915         if ((si == 1) &&
 916             (l2 != ISDN_PROTO_L2_MODEM)
 917 #ifdef CONFIG_ISDN_TTY_FAX
 918             && (l2 != ISDN_PROTO_L2_FAX)
 919 #endif
 920                 ) {
 921                 l2 = ISDN_PROTO_L2_TRANS;
 922                 usg = ISDN_USAGE_VOICE;
 923         }
 924 #endif
 925         m->mdmreg[REG_SI1I] = si2bit[si];
 926         spin_lock_irqsave(&dev->lock, flags);
 927         i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 928         if (i < 0) {
 929                 spin_unlock_irqrestore(&dev->lock, flags);
 930                 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 931         } else {
 932                 info->isdn_driver = dev->drvmap[i];
 933                 info->isdn_channel = dev->chanmap[i];
 934                 info->drv_index = i;
 935                 dev->m_idx[i] = info->line;
 936                 dev->usage[i] |= ISDN_USAGE_OUTGOING;
 937                 info->last_dir = 1;
 938                 isdn_info_update();
 939                 spin_unlock_irqrestore(&dev->lock, flags);
 940                 cmd.driver = info->isdn_driver;
 941                 cmd.arg = info->isdn_channel;
 942                 cmd.command = ISDN_CMD_CLREAZ;
 943                 isdn_command(&cmd);
 944                 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 945                 cmd.driver = info->isdn_driver;
 946                 cmd.command = ISDN_CMD_SETEAZ;
 947                 isdn_command(&cmd);
 948                 cmd.driver = info->isdn_driver;
 949                 cmd.command = ISDN_CMD_SETL2;
 950                 info->last_l2 = l2;
 951                 cmd.arg = info->isdn_channel + (l2 << 8);
 952                 isdn_command(&cmd);
 953                 cmd.driver = info->isdn_driver;
 954                 cmd.command = ISDN_CMD_SETL3;
 955                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 956                 isdn_command(&cmd);
 957                 cmd.driver = info->isdn_driver;
 958                 cmd.arg = info->isdn_channel;
 959                 cmd.parm.cmsg.Length = l + 14;
 960                 cmd.parm.cmsg.Command = CAPI_MANUFACTURER;
 961                 cmd.parm.cmsg.Subcommand = CAPI_REQ;
 962                 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 963                 cmd.parm.cmsg.para[0] = l + 1;
 964                 strncpy(&cmd.parm.cmsg.para[1], msg, l);
 965                 cmd.parm.cmsg.para[l + 1] = 0xd;
 966                 cmd.command = CAPI_PUT_MESSAGE;
 967 /*              info->dialing = 1;
 968                 strcpy(dev->num[i], n);
 969                 isdn_info_update();
 970 */
 971                 isdn_command(&cmd);
 972         }
 973 }
 974
 975 static inline int
 976 isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
 977 {
 978 #ifdef MODEM_PARANOIA_CHECK
 979         if (!info) {
 980                 printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n",
 981                        name, routine);
 982                 return 1;
 983         }
 984         if (info->magic != ISDN_ASYNC_MAGIC) {
 985                 printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n",
 986                        name, routine);
 987                 return 1;
 988         }
 989 #endif
 990         return 0;
 991 }
 992
 993 /*
 994  * This routine is called to set the UART divisor registers to match
 995  * the specified baud rate for a serial port.
 996  */
 997 static void
 998 isdn_tty_change_speed(modem_info *info)
 999 {
1000         uint cflag,
1001                 cval,
1002                 quot;
1003         int i;
1004
1005         if (!info->tty || !info->tty->termios)
1006                 return;
1007         cflag = info->tty->termios->c_cflag;
1008
1009         quot = i = cflag & CBAUD;
1010         if (i & CBAUDEX) {
1011                 i &= ~CBAUDEX;
1012                 if (i < 1 || i > 2)
1013                         info->tty->termios->c_cflag &= ~CBAUDEX;
1014                 else
1015                         i += 15;
1016         }
1017         if (quot) {
1018                 info->mcr |= UART_MCR_DTR;
1019                 isdn_tty_modem_ncarrier(info);
1020         } else {
1021                 info->mcr &= ~UART_MCR_DTR;
1022                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1023 #ifdef ISDN_DEBUG_MODEM_HUP
1024                         printk(KERN_DEBUG "Mhup in changespeed\n");
1025 #endif
1026                         if (info->online)
1027                                 info->ncarrier = 1;
1028                         isdn_tty_modem_reset_regs(info, 0);
1029                         isdn_tty_modem_hup(info, 1);
1030                 }
1031                 return;
1032         }
1033         /* byte size and parity */
1034         cval = cflag & (CSIZE | CSTOPB);
1035         cval >>= 4;
1036         if (cflag & PARENB)
1037                 cval |= UART_LCR_PARITY;
1038         if (!(cflag & PARODD))
1039                 cval |= UART_LCR_EPAR;
1040
1041         /* CTS flow control flag and modem status interrupts */
1042         if (cflag & CRTSCTS) {
1043                 info->flags |= ISDN_ASYNC_CTS_FLOW;
1044         } else
1045                 info->flags &= ~ISDN_ASYNC_CTS_FLOW;
1046         if (cflag & CLOCAL)
1047                 info->flags &= ~ISDN_ASYNC_CHECK_CD;
1048         else {
1049                 info->flags |= ISDN_ASYNC_CHECK_CD;
1050         }
1051 }
1052
1053 static int
1054 isdn_tty_startup(modem_info *info)
1055 {
1056         if (info->flags & ISDN_ASYNC_INITIALIZED)
1057                 return 0;
1058         isdn_lock_drivers();
1059 #ifdef ISDN_DEBUG_MODEM_OPEN
1060         printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line);
1061 #endif
1062         /*
1063          * Now, initialize the UART
1064          */
1065         info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
1066         if (info->tty)
1067                 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1068         /*
1069          * and set the speed of the serial port
1070          */
1071         isdn_tty_change_speed(info);
1072
1073         info->flags |= ISDN_ASYNC_INITIALIZED;
1074         info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
1075         info->send_outstanding = 0;
1076         return 0;
1077 }
1078
1079 /*
1080  * This routine will shutdown a serial port; interrupts are disabled, and
1081  * DTR is dropped if the hangup on close termio flag is on.
1082  */
1083 static void
1084 isdn_tty_shutdown(modem_info *info)
1085 {
1086         if (!(info->flags & ISDN_ASYNC_INITIALIZED))
1087                 return;
1088 #ifdef ISDN_DEBUG_MODEM_OPEN
1089         printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
1090 #endif
1091         isdn_unlock_drivers();
1092         info->msr &= ~UART_MSR_RI;
1093         if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
1094                 info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
1095                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1096                         isdn_tty_modem_reset_regs(info, 0);
1097 #ifdef ISDN_DEBUG_MODEM_HUP
1098                         printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n");
1099 #endif
1100                         isdn_tty_modem_hup(info, 1);
1101                 }
1102         }
1103         if (info->tty)
1104                 set_bit(TTY_IO_ERROR, &info->tty->flags);
1105
1106         info->flags &= ~ISDN_ASYNC_INITIALIZED;
1107 }
1108
1109 /* isdn_tty_write() is the main send-routine. It is called from the upper
1110  * levels within the kernel to perform sending data. Depending on the
1111  * online-flag it either directs output to the at-command-interpreter or
1112  * to the lower level. Additional tasks done here:
1113  *  - If online, check for escape-sequence (+++)
1114  *  - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes.
1115  *  - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed.
1116  *  - If dialing, abort dial.
1117  */
1118 static int
1119 isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
1120 {
1121         int c;
1122         int total = 0;
1123         modem_info *info = (modem_info *) tty->driver_data;
1124         atemu *m = &info->emu;
1125
1126         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write"))
1127                 return 0;
1128         /* See isdn_tty_senddown() */
1129         atomic_inc(&info->xmit_lock);
1130         while (1) {
1131                 c = count;
1132                 if (c > info->xmit_size - info->xmit_count)
1133                         c = info->xmit_size - info->xmit_count;
1134                 if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize)
1135                         c = dev->drv[info->isdn_driver]->maxbufsize;
1136                 if (c <= 0)
1137                         break;
1138                 if ((info->online > 1)
1139 #ifdef CONFIG_ISDN_AUDIO
1140                     || (info->vonline & 3)
1141 #endif
1142                         ) {
1143 #ifdef CONFIG_ISDN_AUDIO
1144                         if (!info->vonline)
1145 #endif
1146                                 isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
1147                                                    &(m->pluscount),
1148                                                    &(m->lastplus));
1149                         memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
1150 #ifdef CONFIG_ISDN_AUDIO
1151                         if (info->vonline) {
1152                                 int cc = isdn_tty_handleDLEdown(info, m, c);
1153                                 if (info->vonline & 2) {
1154                                         if (!cc) {
1155                                                 /* If DLE decoding results in zero-transmit, but
1156                                                  * c originally was non-zero, do a wakeup.
1157                                                  */
1158                                                 tty_wakeup(tty);
1159                                                 info->msr |= UART_MSR_CTS;
1160                                                 info->lsr |= UART_LSR_TEMT;
1161                                         }
1162                                         info->xmit_count += cc;
1163                                 }
1164                                 if ((info->vonline & 3) == 1) {
1165                                         /* Do NOT handle Ctrl-Q or Ctrl-S
1166                                          * when in full-duplex audio mode.
1167                                          */
1168                                         if (isdn_tty_end_vrx(buf, c)) {
1169                                                 info->vonline &= ~1;
1170 #ifdef ISDN_DEBUG_MODEM_VOICE
1171                                                 printk(KERN_DEBUG
1172                                                        "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n",
1173                                                        info->line);
1174 #endif
1175                                                 isdn_tty_at_cout("\020\003\r\nVCON\r\n", info);
1176                                         }
1177                                 }
1178                         } else
1179                                 if (TTY_IS_FCLASS1(info)) {
1180                                         int cc = isdn_tty_handleDLEdown(info, m, c);
1181
1182                                         if (info->vonline & 4) { /* ETX seen */
1183                                                 isdn_ctrl c;
1184
1185                                                 c.command = ISDN_CMD_FAXCMD;
1186                                                 c.driver = info->isdn_driver;
1187                                                 c.arg = info->isdn_channel;
1188                                                 c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
1189                                                 c.parm.aux.subcmd = ETX;
1190                                                 isdn_command(&c);
1191                                         }
1192                                         info->vonline = 0;
1193 #ifdef ISDN_DEBUG_MODEM_VOICE
1194                                         printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
1195 #endif
1196                                         info->xmit_count += cc;
1197                                 } else
1198 #endif
1199                                         info->xmit_count += c;
1200                 } else {
1201                         info->msr |= UART_MSR_CTS;
1202                         info->lsr |= UART_LSR_TEMT;
1203                         if (info->dialing) {
1204                                 info->dialing = 0;
1205 #ifdef ISDN_DEBUG_MODEM_HUP
1206                                 printk(KERN_DEBUG "Mhup in isdn_tty_write\n");
1207 #endif
1208                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
1209                                 isdn_tty_modem_hup(info, 1);
1210                         } else
1211                                 c = isdn_tty_edit_at(buf, c, info);
1212                 }
1213                 buf += c;
1214                 count -= c;
1215                 total += c;
1216         }
1217         atomic_dec(&info->xmit_lock);
1218         if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) {
1219                 if (m->mdmreg[REG_DXMT] & BIT_DXMT) {
1220                         isdn_tty_senddown(info);
1221                         isdn_tty_tint(info);
1222                 }
1223                 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1224         }
1225         return total;
1226 }
1227
1228 static int
1229 isdn_tty_write_room(struct tty_struct *tty)
1230 {
1231         modem_info *info = (modem_info *) tty->driver_data;
1232         int ret;
1233
1234         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room"))
1235                 return 0;
1236         if (!info->online)
1237                 return info->xmit_size;
1238         ret = info->xmit_size - info->xmit_count;
1239         return (ret < 0) ? 0 : ret;
1240 }
1241
1242 static int
1243 isdn_tty_chars_in_buffer(struct tty_struct *tty)
1244 {
1245         modem_info *info = (modem_info *) tty->driver_data;
1246
1247         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer"))
1248                 return 0;
1249         if (!info->online)
1250                 return 0;
1251         return (info->xmit_count);
1252 }
1253
1254 static void
1255 isdn_tty_flush_buffer(struct tty_struct *tty)
1256 {
1257         modem_info *info;
1258
1259         if (!tty) {
1260                 return;
1261         }
1262         info = (modem_info *) tty->driver_data;
1263         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) {
1264                 return;
1265         }
1266         isdn_tty_cleanup_xmit(info);
1267         info->xmit_count = 0;
1268         tty_wakeup(tty);
1269 }
1270
1271 static void
1272 isdn_tty_flush_chars(struct tty_struct *tty)
1273 {
1274         modem_info *info = (modem_info *) tty->driver_data;
1275
1276         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars"))
1277                 return;
1278         if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue))
1279                 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1280 }
1281
1282 /*
1283  * ------------------------------------------------------------
1284  * isdn_tty_throttle()
1285  *
1286  * This routine is called by the upper-layer tty layer to signal that
1287  * incoming characters should be throttled.
1288  * ------------------------------------------------------------
1289  */
1290 static void
1291 isdn_tty_throttle(struct tty_struct *tty)
1292 {
1293         modem_info *info = (modem_info *) tty->driver_data;
1294
1295         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle"))
1296                 return;
1297         if (I_IXOFF(tty))
1298                 info->x_char = STOP_CHAR(tty);
1299         info->mcr &= ~UART_MCR_RTS;
1300 }
1301
1302 static void
1303 isdn_tty_unthrottle(struct tty_struct *tty)
1304 {
1305         modem_info *info = (modem_info *) tty->driver_data;
1306
1307         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle"))
1308                 return;
1309         if (I_IXOFF(tty)) {
1310                 if (info->x_char)
1311                         info->x_char = 0;
1312                 else
1313                         info->x_char = START_CHAR(tty);
1314         }
1315         info->mcr |= UART_MCR_RTS;
1316 }
1317
1318 /*
1319  * ------------------------------------------------------------
1320  * isdn_tty_ioctl() and friends
1321  * ------------------------------------------------------------
1322  */
1323
1324 /*
1325  * isdn_tty_get_lsr_info - get line status register info
1326  *
1327  * Purpose: Let user call ioctl() to get info when the UART physically
1328  *          is emptied.  On bus types like RS485, the transmitter must
1329  *          release the bus after transmitting. This must be done when
1330  *          the transmit shift register is empty, not be done when the
1331  *          transmit holding register is empty.  This functionality
1332  *          allows RS485 driver to be written in user space.
1333  */
1334 static int
1335 isdn_tty_get_lsr_info(modem_info *info, uint __user *value)
1336 {
1337         u_char status;
1338         uint result;
1339
1340         status = info->lsr;
1341         result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1342         return put_user(result, value);
1343 }
1344
1345
1346 static int
1347 isdn_tty_tiocmget(struct tty_struct *tty)
1348 {
1349         modem_info *info = (modem_info *) tty->driver_data;
1350         u_char control, status;
1351
1352         if (isdn_tty_paranoia_check(info, tty->name, __func__))
1353                 return -ENODEV;
1354         if (tty->flags & (1 << TTY_IO_ERROR))
1355                 return -EIO;
1356
1357         mutex_lock(&modem_info_mutex);
1358 #ifdef ISDN_DEBUG_MODEM_IOCTL
1359         printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line);
1360 #endif
1361
1362         control = info->mcr;
1363         status = info->msr;
1364         mutex_unlock(&modem_info_mutex);
1365         return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
1366                 | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
1367                 | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
1368                 | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
1369                 | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
1370                 | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1371 }
1372
1373 static int
1374 isdn_tty_tiocmset(struct tty_struct *tty,
1375                   unsigned int set, unsigned int clear)
1376 {
1377         modem_info *info = (modem_info *) tty->driver_data;
1378
1379         if (isdn_tty_paranoia_check(info, tty->name, __func__))
1380                 return -ENODEV;
1381         if (tty->flags & (1 << TTY_IO_ERROR))
1382                 return -EIO;
1383
1384 #ifdef ISDN_DEBUG_MODEM_IOCTL
1385         printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear);
1386 #endif
1387
1388         mutex_lock(&modem_info_mutex);
1389         if (set & TIOCM_RTS)
1390                 info->mcr |= UART_MCR_RTS;
1391         if (set & TIOCM_DTR) {
1392                 info->mcr |= UART_MCR_DTR;
1393                 isdn_tty_modem_ncarrier(info);
1394         }
1395
1396         if (clear & TIOCM_RTS)
1397                 info->mcr &= ~UART_MCR_RTS;
1398         if (clear & TIOCM_DTR) {
1399                 info->mcr &= ~UART_MCR_DTR;
1400                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1401                         isdn_tty_modem_reset_regs(info, 0);
1402 #ifdef ISDN_DEBUG_MODEM_HUP
1403                         printk(KERN_DEBUG "Mhup in TIOCMSET\n");
1404 #endif
1405                         if (info->online)
1406                                 info->ncarrier = 1;
1407                         isdn_tty_modem_hup(info, 1);
1408                 }
1409         }
1410         mutex_unlock(&modem_info_mutex);
1411         return 0;
1412 }
1413
1414 static int
1415 isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
1416 {
1417         modem_info *info = (modem_info *) tty->driver_data;
1418         int retval;
1419
1420         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl"))
1421                 return -ENODEV;
1422         if (tty->flags & (1 << TTY_IO_ERROR))
1423                 return -EIO;
1424         switch (cmd) {
1425         case TCSBRK:   /* SVID version: non-zero arg --> no break */
1426 #ifdef ISDN_DEBUG_MODEM_IOCTL
1427                 printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
1428 #endif
1429                 retval = tty_check_change(tty);
1430                 if (retval)
1431                         return retval;
1432                 tty_wait_until_sent(tty, 0);
1433                 return 0;
1434         case TCSBRKP:  /* support for POSIX tcsendbreak() */
1435 #ifdef ISDN_DEBUG_MODEM_IOCTL
1436                 printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
1437 #endif
1438                 retval = tty_check_change(tty);
1439                 if (retval)
1440                         return retval;
1441                 tty_wait_until_sent(tty, 0);
1442                 return 0;
1443         case TIOCSERGETLSR:     /* Get line status register */
1444 #ifdef ISDN_DEBUG_MODEM_IOCTL
1445                 printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
1446 #endif
1447                 return isdn_tty_get_lsr_info(info, (uint __user *) arg);
1448         default:
1449 #ifdef ISDN_DEBUG_MODEM_IOCTL
1450                 printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
1451 #endif
1452                 return -ENOIOCTLCMD;
1453         }
1454         return 0;
1455 }
1456
1457 static void
1458 isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1459 {
1460         modem_info *info = (modem_info *) tty->driver_data;
1461
1462         if (!old_termios)
1463                 isdn_tty_change_speed(info);
1464         else {
1465                 if (tty->termios->c_cflag == old_termios->c_cflag &&
1466                     tty->termios->c_ispeed == old_termios->c_ispeed &&
1467                     tty->termios->c_ospeed == old_termios->c_ospeed)
1468                         return;
1469                 isdn_tty_change_speed(info);
1470                 if ((old_termios->c_cflag & CRTSCTS) &&
1471                     !(tty->termios->c_cflag & CRTSCTS))
1472                         tty->hw_stopped = 0;
1473         }
1474 }
1475
1476 /*
1477  * ------------------------------------------------------------
1478  * isdn_tty_open() and friends
1479  * ------------------------------------------------------------
1480  */
1481 static int
1482 isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *info)
1483 {
1484         DECLARE_WAITQUEUE(wait, NULL);
1485         int do_clocal = 0;
1486         int retval;
1487
1488         /*
1489          * If the device is in the middle of being closed, then block
1490          * until it's done, and then try again.
1491          */
1492         if (tty_hung_up_p(filp) ||
1493             (info->flags & ISDN_ASYNC_CLOSING)) {
1494                 if (info->flags & ISDN_ASYNC_CLOSING)
1495                         interruptible_sleep_on(&info->close_wait);
1496 #ifdef MODEM_DO_RESTART
1497                 if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
1498                         return -EAGAIN;
1499                 else
1500                         return -ERESTARTSYS;
1501 #else
1502                 return -EAGAIN;
1503 #endif
1504         }
1505         /*
1506          * If non-blocking mode is set, then make the check up front
1507          * and then exit.
1508          */
1509         if ((filp->f_flags & O_NONBLOCK) ||
1510             (tty->flags & (1 << TTY_IO_ERROR))) {
1511                 if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
1512                         return -EBUSY;
1513                 info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
1514                 return 0;
1515         }
1516         if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
1517                 if (info->normal_termios.c_cflag & CLOCAL)
1518                         do_clocal = 1;
1519         } else {
1520                 if (tty->termios->c_cflag & CLOCAL)
1521                         do_clocal = 1;
1522         }
1523         /*
1524          * Block waiting for the carrier detect and the line to become
1525          * free (i.e., not in use by the callout).  While we are in
1526          * this loop, info->count is dropped by one, so that
1527          * isdn_tty_close() knows when to free things.  We restore it upon
1528          * exit, either normal or abnormal.
1529          */
1530         retval = 0;
1531         add_wait_queue(&info->open_wait, &wait);
1532 #ifdef ISDN_DEBUG_MODEM_OPEN
1533         printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
1534                info->line, info->count);
1535 #endif
1536         if (!(tty_hung_up_p(filp)))
1537                 info->count--;
1538         info->blocked_open++;
1539         while (1) {
1540                 set_current_state(TASK_INTERRUPTIBLE);
1541                 if (tty_hung_up_p(filp) ||
1542                     !(info->flags & ISDN_ASYNC_INITIALIZED)) {
1543 #ifdef MODEM_DO_RESTART
1544                         if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
1545                                 retval = -EAGAIN;
1546                         else
1547                                 retval = -ERESTARTSYS;
1548 #else
1549                         retval = -EAGAIN;
1550 #endif
1551                         break;
1552                 }
1553                 if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
1554                     !(info->flags & ISDN_ASYNC_CLOSING) &&
1555                     (do_clocal || (info->msr & UART_MSR_DCD))) {
1556                         break;
1557                 }
1558                 if (signal_pending(current)) {
1559                         retval = -ERESTARTSYS;
1560                         break;
1561                 }
1562 #ifdef ISDN_DEBUG_MODEM_OPEN
1563                 printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
1564                        info->line, info->count);
1565 #endif
1566                 schedule();
1567         }
1568         current->state = TASK_RUNNING;
1569         remove_wait_queue(&info->open_wait, &wait);
1570         if (!tty_hung_up_p(filp))
1571                 info->count++;
1572         info->blocked_open--;
1573 #ifdef ISDN_DEBUG_MODEM_OPEN
1574         printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
1575                info->line, info->count);
1576 #endif
1577         if (retval)
1578                 return retval;
1579         info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
1580         return 0;
1581 }
1582
1583 /*
1584  * This routine is called whenever a serial port is opened.  It
1585  * enables interrupts for a serial port, linking in its async structure into
1586  * the IRQ chain.   It also performs the serial-specific
1587  * initialization for the tty structure.
1588  */
1589 static int
1590 isdn_tty_open(struct tty_struct *tty, struct file *filp)
1591 {
1592         modem_info *info;
1593         int retval;
1594
1595         info = &dev->mdm.info[tty->index];
1596         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
1597                 return -ENODEV;
1598         if (!try_module_get(info->owner)) {
1599                 printk(KERN_WARNING "%s: cannot reserve module\n", __func__);
1600                 return -ENODEV;
1601         }
1602 #ifdef ISDN_DEBUG_MODEM_OPEN
1603         printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
1604                info->count);
1605 #endif
1606         info->count++;
1607         tty->driver_data = info;
1608         info->tty = tty;
1609         /*
1610          * Start up serial port
1611          */
1612         retval = isdn_tty_startup(info);
1613         if (retval) {
1614 #ifdef ISDN_DEBUG_MODEM_OPEN
1615                 printk(KERN_DEBUG "isdn_tty_open return after startup\n");
1616 #endif
1617                 module_put(info->owner);
1618                 return retval;
1619         }
1620         retval = isdn_tty_block_til_ready(tty, filp, info);
1621         if (retval) {
1622 #ifdef ISDN_DEBUG_MODEM_OPEN
1623                 printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
1624 #endif
1625                 module_put(info->owner);
1626                 return retval;
1627         }
1628 #ifdef ISDN_DEBUG_MODEM_OPEN
1629         printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line);
1630 #endif
1631         dev->modempoll++;
1632 #ifdef ISDN_DEBUG_MODEM_OPEN
1633         printk(KERN_DEBUG "isdn_tty_open normal exit\n");
1634 #endif
1635         return 0;
1636 }
1637
1638 static void
1639 isdn_tty_close(struct tty_struct *tty, struct file *filp)
1640 {
1641         modem_info *info = (modem_info *) tty->driver_data;
1642         ulong timeout;
1643
1644         if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
1645                 return;
1646         if (tty_hung_up_p(filp)) {
1647 #ifdef ISDN_DEBUG_MODEM_OPEN
1648                 printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n");
1649 #endif
1650                 return;
1651         }
1652         if ((tty->count == 1) && (info->count != 1)) {
1653                 /*
1654                  * Uh, oh.  tty->count is 1, which means that the tty
1655                  * structure will be freed.  Info->count should always
1656                  * be one in these conditions.  If it's greater than
1657                  * one, we've got real problems, since it means the
1658                  * serial port won't be shutdown.
1659                  */
1660                 printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
1661                        "info->count is %d\n", info->count);
1662                 info->count = 1;
1663         }
1664         if (--info->count < 0) {
1665                 printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
1666                        info->line, info->count);
1667                 info->count = 0;
1668         }
1669         if (info->count) {
1670 #ifdef ISDN_DEBUG_MODEM_OPEN
1671                 printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
1672 #endif
1673                 module_put(info->owner);
1674                 return;
1675         }
1676         info->flags |= ISDN_ASYNC_CLOSING;
1677         /*
1678          * Save the termios structure, since this port may have
1679          * separate termios for callout and dialin.
1680          */
1681         if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
1682                 info->normal_termios = *tty->termios;
1683         if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
1684                 info->callout_termios = *tty->termios;
1685
1686         tty->closing = 1;
1687         /*
1688          * At this point we stop accepting input.  To do this, we
1689          * disable the receive line status interrupts, and tell the
1690          * interrupt driver to stop checking the data ready bit in the
1691          * line status register.
1692          */
1693         if (info->flags & ISDN_ASYNC_INITIALIZED) {
1694                 tty_wait_until_sent_from_close(tty, 3000);      /* 30 seconds timeout */
1695                 /*
1696                  * Before we drop DTR, make sure the UART transmitter
1697                  * has completely drained; this is especially
1698                  * important if there is a transmit FIFO!
1699                  */
1700                 timeout = jiffies + HZ;
1701                 while (!(info->lsr & UART_LSR_TEMT)) {
1702                         schedule_timeout_interruptible(20);
1703                         if (time_after(jiffies, timeout))
1704                                 break;
1705                 }
1706         }
1707         dev->modempoll--;
1708         isdn_tty_shutdown(info);
1709         isdn_tty_flush_buffer(tty);
1710         tty_ldisc_flush(tty);
1711         info->tty = NULL;
1712         info->ncarrier = 0;
1713         tty->closing = 0;
1714         module_put(info->owner);
1715         if (info->blocked_open) {
1716                 msleep_interruptible(500);
1717                 wake_up_interruptible(&info->open_wait);
1718         }
1719         info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
1720         wake_up_interruptible(&info->close_wait);
1721 #ifdef ISDN_DEBUG_MODEM_OPEN
1722         printk(KERN_DEBUG "isdn_tty_close normal exit\n");
1723 #endif
1724 }
1725
1726 /*
1727  * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
1728  */
1729 static void
1730 isdn_tty_hangup(struct tty_struct *tty)
1731 {
1732         modem_info *info = (modem_info *) tty->driver_data;
1733
1734         if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
1735                 return;
1736         isdn_tty_shutdown(info);
1737         info->count = 0;
1738         info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
1739         info->tty = NULL;
1740         wake_up_interruptible(&info->open_wait);
1741 }
1742
1743 /* This routine initializes all emulator-data.
1744  */
1745 static void
1746 isdn_tty_reset_profile(atemu *m)
1747 {
1748         m->profile[0] = 0;
1749         m->profile[1] = 0;
1750         m->profile[2] = 43;
1751         m->profile[3] = 13;
1752         m->profile[4] = 10;
1753         m->profile[5] = 8;
1754         m->profile[6] = 3;
1755         m->profile[7] = 60;
1756         m->profile[8] = 2;
1757         m->profile[9] = 6;
1758         m->profile[10] = 7;
1759         m->profile[11] = 70;
1760         m->profile[12] = 0x45;
1761         m->profile[13] = 4;
1762         m->profile[14] = ISDN_PROTO_L2_X75I;
1763         m->profile[15] = ISDN_PROTO_L3_TRANS;
1764         m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16;
1765         m->profile[17] = ISDN_MODEM_WINSIZE;
1766         m->profile[18] = 4;
1767         m->profile[19] = 0;
1768         m->profile[20] = 0;
1769         m->profile[23] = 0;
1770         m->pmsn[0] = '\0';
1771         m->plmsn[0] = '\0';
1772 }
1773
1774 #ifdef CONFIG_ISDN_AUDIO
1775 static void
1776 isdn_tty_modem_reset_vpar(atemu *m)
1777 {
1778         m->vpar[0] = 2;         /* Voice-device            (2 = phone line) */
1779         m->vpar[1] = 0;         /* Silence detection level (0 = none      ) */
1780         m->vpar[2] = 70;        /* Silence interval        (7 sec.        ) */
1781         m->vpar[3] = 2;         /* Compression type        (1 = ADPCM-2   ) */
1782         m->vpar[4] = 0;         /* DTMF detection level    (0 = softcode  ) */
1783         m->vpar[5] = 8;         /* DTMF interval           (8 * 5 ms.     ) */
1784 }
1785 #endif
1786
1787 #ifdef CONFIG_ISDN_TTY_FAX
1788 static void
1789 isdn_tty_modem_reset_faxpar(modem_info *info)
1790 {
1791         T30_s *f = info->fax;
1792
1793         f->code = 0;
1794         f->phase = ISDN_FAX_PHASE_IDLE;
1795         f->direction = 0;
1796         f->resolution = 1;      /* fine */
1797         f->rate = 5;            /* 14400 bit/s */
1798         f->width = 0;
1799         f->length = 0;
1800         f->compression = 0;
1801         f->ecm = 0;
1802         f->binary = 0;
1803         f->scantime = 0;
1804         memset(&f->id[0], 32, FAXIDLEN - 1);
1805         f->id[FAXIDLEN - 1] = 0;
1806         f->badlin = 0;
1807         f->badmul = 0;
1808         f->bor = 0;
1809         f->nbc = 0;
1810         f->cq = 0;
1811         f->cr = 0;
1812         f->ctcrty = 0;
1813         f->minsp = 0;
1814         f->phcto = 30;
1815         f->rel = 0;
1816         memset(&f->pollid[0], 32, FAXIDLEN - 1);
1817         f->pollid[FAXIDLEN - 1] = 0;
1818 }
1819 #endif
1820
1821 static void
1822 isdn_tty_modem_reset_regs(modem_info *info, int force)
1823 {
1824         atemu *m = &info->emu;
1825         if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) {
1826                 memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG);
1827                 memcpy(m->msn, m->pmsn, ISDN_MSNLEN);
1828                 memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN);
1829                 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
1830         }
1831 #ifdef CONFIG_ISDN_AUDIO
1832         isdn_tty_modem_reset_vpar(m);
1833 #endif
1834 #ifdef CONFIG_ISDN_TTY_FAX
1835         isdn_tty_modem_reset_faxpar(info);
1836 #endif
1837         m->mdmcmdl = 0;
1838 }
1839
1840 static void
1841 modem_write_profile(atemu *m)
1842 {
1843         memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG);
1844         memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
1845         memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN);
1846         if (dev->profd)
1847                 send_sig(SIGIO, dev->profd, 1);
1848 }
1849
1850 static const struct tty_operations modem_ops = {
1851         .open = isdn_tty_open,
1852         .close = isdn_tty_close,
1853         .write = isdn_tty_write,
1854         .flush_chars = isdn_tty_flush_chars,
1855         .write_room = isdn_tty_write_room,
1856         .chars_in_buffer = isdn_tty_chars_in_buffer,
1857         .flush_buffer = isdn_tty_flush_buffer,
1858         .ioctl = isdn_tty_ioctl,
1859         .throttle = isdn_tty_throttle,
1860         .unthrottle = isdn_tty_unthrottle,
1861         .set_termios = isdn_tty_set_termios,
1862         .hangup = isdn_tty_hangup,
1863         .tiocmget = isdn_tty_tiocmget,
1864         .tiocmset = isdn_tty_tiocmset,
1865 };
1866
1867 int
1868 isdn_tty_modem_init(void)
1869 {
1870         isdn_modem_t    *m;
1871         int             i, retval;
1872         modem_info      *info;
1873
1874         m = &dev->mdm;
1875         m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS);
1876         if (!m->tty_modem)
1877                 return -ENOMEM;
1878         m->tty_modem->name = "ttyI";
1879         m->tty_modem->major = ISDN_TTY_MAJOR;
1880         m->tty_modem->minor_start = 0;
1881         m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL;
1882         m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
1883         m->tty_modem->init_termios = tty_std_termios;
1884         m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1885         m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1886         m->tty_modem->driver_name = "isdn_tty";
1887         tty_set_operations(m->tty_modem, &modem_ops);
1888         retval = tty_register_driver(m->tty_modem);
1889         if (retval) {
1890                 printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n");
1891                 goto err;
1892         }
1893         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1894                 info = &m->info[i];
1895 #ifdef CONFIG_ISDN_TTY_FAX
1896                 if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) {
1897                         printk(KERN_ERR "Could not allocate fax t30-buffer\n");
1898                         retval = -ENOMEM;
1899                         goto err_unregister;
1900                 }
1901 #endif
1902 #ifdef MODULE
1903                 info->owner = THIS_MODULE;
1904 #endif
1905                 spin_lock_init(&info->readlock);
1906                 sprintf(info->last_cause, "0000");
1907                 sprintf(info->last_num, "none");
1908                 info->last_dir = 0;
1909                 info->last_lhup = 1;
1910                 info->last_l2 = -1;
1911                 info->last_si = 0;
1912                 isdn_tty_reset_profile(&info->emu);
1913                 isdn_tty_modem_reset_regs(info, 1);
1914                 info->magic = ISDN_ASYNC_MAGIC;
1915                 info->line = i;
1916                 info->tty = NULL;
1917                 info->x_char = 0;
1918                 info->count = 0;
1919                 info->blocked_open = 0;
1920                 init_waitqueue_head(&info->open_wait);
1921                 init_waitqueue_head(&info->close_wait);
1922                 info->isdn_driver = -1;
1923                 info->isdn_channel = -1;
1924                 info->drv_index = -1;
1925                 info->xmit_size = ISDN_SERIAL_XMIT_SIZE;
1926                 init_timer(&info->nc_timer);
1927                 info->nc_timer.function = isdn_tty_modem_do_ncarrier;
1928                 info->nc_timer.data = (unsigned long) info;
1929                 skb_queue_head_init(&info->xmit_queue);
1930 #ifdef CONFIG_ISDN_AUDIO
1931                 skb_queue_head_init(&info->dtmf_queue);
1932 #endif
1933                 if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) {
1934                         printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
1935                         retval = -ENOMEM;
1936                         goto err_unregister;
1937                 }
1938                 /* Make room for T.70 header */
1939                 info->xmit_buf += 4;
1940         }
1941         return 0;
1942 err_unregister:
1943         for (i--; i >= 0; i--) {
1944                 info = &m->info[i];
1945 #ifdef CONFIG_ISDN_TTY_FAX
1946                 kfree(info->fax);
1947 #endif
1948                 kfree(info->xmit_buf - 4);
1949         }
1950         tty_unregister_driver(m->tty_modem);
1951 err:
1952         put_tty_driver(m->tty_modem);
1953         m->tty_modem = NULL;
1954         return retval;
1955 }
1956
1957 void
1958 isdn_tty_exit(void)
1959 {
1960         modem_info *info;
1961         int i;
1962
1963         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1964                 info = &dev->mdm.info[i];
1965                 isdn_tty_cleanup_xmit(info);
1966 #ifdef CONFIG_ISDN_TTY_FAX
1967                 kfree(info->fax);
1968 #endif
1969                 kfree(info->xmit_buf - 4);
1970         }
1971         tty_unregister_driver(dev->mdm.tty_modem);
1972         put_tty_driver(dev->mdm.tty_modem);
1973         dev->mdm.tty_modem = NULL;
1974 }
1975
1976
1977 /*
1978  * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx)
1979  *      match the MSN against the MSNs (glob patterns) defined for tty_emulator,
1980  *      and return 0 for match, 1 for no match, 2 if MSN could match if longer.
1981  */
1982
1983 static int
1984 isdn_tty_match_icall(char *cid, atemu *emu, int di)
1985 {
1986 #ifdef ISDN_DEBUG_MODEM_ICALL
1987         printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n",
1988                emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di),
1989                emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]);
1990 #endif
1991         if (strlen(emu->lmsn)) {
1992                 char *p = emu->lmsn;
1993                 char *q;
1994                 int  tmp;
1995                 int  ret = 0;
1996
1997                 while (1) {
1998                         if ((q = strchr(p, ';')))
1999                                 *q = '\0';
2000                         if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret)
2001                                 ret = tmp;
2002 #ifdef ISDN_DEBUG_MODEM_ICALL
2003                         printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n",
2004                                p, isdn_map_eaz2msn(emu->msn, di), tmp);
2005 #endif
2006                         if (q) {
2007                                 *q = ';';
2008                                 p = q;
2009                                 p++;
2010                         }
2011                         if (!tmp)
2012                                 return 0;
2013                         if (!q)
2014                                 break;
2015                 }
2016                 return ret;
2017         } else {
2018                 int tmp;
2019                 tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di));
2020 #ifdef ISDN_DEBUG_MODEM_ICALL
2021                 printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
2022                        isdn_map_eaz2msn(emu->msn, di), tmp);
2023 #endif
2024                 return tmp;
2025         }
2026 }
2027
2028 /*
2029  * An incoming call-request has arrived.
2030  * Search the tty-devices for an appropriate device and bind
2031  * it to the ISDN-Channel.
2032  * Return:
2033  *
2034  *  0 = No matching device found.
2035  *  1 = A matching device found.
2036  *  3 = No match found, but eventually would match, if
2037  *      CID is longer.
2038  */
2039 int
2040 isdn_tty_find_icall(int di, int ch, setup_parm *setup)
2041 {
2042         char *eaz;
2043         int i;
2044         int wret;
2045         int idx;
2046         int si1;
2047         int si2;
2048         char *nr;
2049         ulong flags;
2050
2051         if (!setup->phone[0]) {
2052                 nr = "0";
2053                 printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n");
2054         } else
2055                 nr = setup->phone;
2056         si1 = (int) setup->si1;
2057         si2 = (int) setup->si2;
2058         if (!setup->eazmsn[0]) {
2059                 printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n");
2060                 eaz = "0";
2061         } else
2062                 eaz = setup->eazmsn;
2063 #ifdef ISDN_DEBUG_MODEM_ICALL
2064         printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2);
2065 #endif
2066         wret = 0;
2067         spin_lock_irqsave(&dev->lock, flags);
2068         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
2069                 modem_info *info = &dev->mdm.info[i];
2070
2071                 if (info->count == 0)
2072                         continue;
2073                 if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) &&  /* SI1 is matching */
2074                     (info->emu.mdmreg[REG_SI2] == si2)) {         /* SI2 is matching */
2075                         idx = isdn_dc2minor(di, ch);
2076 #ifdef ISDN_DEBUG_MODEM_ICALL
2077                         printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
2078                         printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
2079                                info->flags, info->isdn_driver, info->isdn_channel,
2080                                dev->usage[idx]);
2081 #endif
2082                         if (
2083 #ifndef FIX_FILE_TRANSFER
2084                                 (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
2085 #endif
2086                                 (info->isdn_driver == -1) &&
2087                                 (info->isdn_channel == -1) &&
2088                                 (USG_NONE(dev->usage[idx]))) {
2089                                 int matchret;
2090
2091                                 if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret)
2092                                         wret = matchret;
2093                                 if (!matchret) {                  /* EAZ is matching */
2094                                         info->isdn_driver = di;
2095                                         info->isdn_channel = ch;
2096                                         info->drv_index = idx;
2097                                         dev->m_idx[idx] = info->line;
2098                                         dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
2099                                         dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
2100                                         strcpy(dev->num[idx], nr);
2101                                         strcpy(info->emu.cpn, eaz);
2102                                         info->emu.mdmreg[REG_SI1I] = si2bit[si1];
2103                                         info->emu.mdmreg[REG_PLAN] = setup->plan;
2104                                         info->emu.mdmreg[REG_SCREEN] = setup->screen;
2105                                         isdn_info_update();
2106                                         spin_unlock_irqrestore(&dev->lock, flags);
2107                                         printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr,
2108                                                info->line);
2109                                         info->msr |= UART_MSR_RI;
2110                                         isdn_tty_modem_result(RESULT_RING, info);
2111                                         isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1);
2112                                         return 1;
2113                                 }
2114                         }
2115                 }
2116         }
2117         spin_unlock_irqrestore(&dev->lock, flags);
2118         printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
2119                ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored");
2120         return (wret == 2) ? 3 : 0;
2121 }
2122
2123 #define TTY_IS_ACTIVE(info)                                             \
2124         (info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
2125
2126 int
2127 isdn_tty_stat_callback(int i, isdn_ctrl *c)
2128 {
2129         int mi;
2130         modem_info *info;
2131         char *e;
2132
2133         if (i < 0)
2134                 return 0;
2135         if ((mi = dev->m_idx[i]) >= 0) {
2136                 info = &dev->mdm.info[mi];
2137                 switch (c->command) {
2138                 case ISDN_STAT_CINF:
2139                         printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
2140                         info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
2141                         if (e == (char *)c->parm.num)
2142                                 info->emu.charge = 0;
2143
2144                         break;
2145                 case ISDN_STAT_BSENT:
2146 #ifdef ISDN_TTY_STAT_DEBUG
2147                         printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
2148 #endif
2149                         if ((info->isdn_driver == c->driver) &&
2150                             (info->isdn_channel == c->arg)) {
2151                                 info->msr |= UART_MSR_CTS;
2152                                 if (info->send_outstanding)
2153                                         if (!(--info->send_outstanding))
2154                                                 info->lsr |= UART_LSR_TEMT;
2155                                 isdn_tty_tint(info);
2156                                 return 1;
2157                         }
2158                         break;
2159                 case ISDN_STAT_CAUSE:
2160 #ifdef ISDN_TTY_STAT_DEBUG
2161                         printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
2162 #endif
2163                         /* Signal cause to tty-device */
2164                         strncpy(info->last_cause, c->parm.num, 5);
2165                         return 1;
2166                 case ISDN_STAT_DISPLAY:
2167 #ifdef ISDN_TTY_STAT_DEBUG
2168                         printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
2169 #endif
2170                         /* Signal display to tty-device */
2171                         if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
2172                             !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
2173                                 isdn_tty_at_cout("\r\n", info);
2174                                 isdn_tty_at_cout("DISPLAY: ", info);
2175                                 isdn_tty_at_cout(c->parm.display, info);
2176                                 isdn_tty_at_cout("\r\n", info);
2177                         }
2178                         return 1;
2179                 case ISDN_STAT_DCONN:
2180 #ifdef ISDN_TTY_STAT_DEBUG
2181                         printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
2182 #endif
2183                         if (TTY_IS_ACTIVE(info)) {
2184                                 if (info->dialing == 1) {
2185                                         info->dialing = 2;
2186                                         return 1;
2187                                 }
2188                         }
2189                         break;
2190                 case ISDN_STAT_DHUP:
2191 #ifdef ISDN_TTY_STAT_DEBUG
2192                         printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
2193 #endif
2194                         if (TTY_IS_ACTIVE(info)) {
2195                                 if (info->dialing == 1)
2196                                         isdn_tty_modem_result(RESULT_BUSY, info);
2197                                 if (info->dialing > 1)
2198                                         isdn_tty_modem_result(RESULT_NO_CARRIER, info);
2199                                 info->dialing = 0;
2200 #ifdef ISDN_DEBUG_MODEM_HUP
2201                                 printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
2202 #endif
2203                                 isdn_tty_modem_hup(info, 0);
2204                                 return 1;
2205                         }
2206                         break;
2207                 case ISDN_STAT_BCONN:
2208 #ifdef ISDN_TTY_STAT_DEBUG
2209                         printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
2210 #endif
2211                         /* Wake up any processes waiting
2212                          * for incoming call of this device when
2213                          * DCD follow the state of incoming carrier
2214                          */
2215                         if (info->blocked_open &&
2216                             (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
2217                                 wake_up_interruptible(&info->open_wait);
2218                         }
2219
2220                         /* Schedule CONNECT-Message to any tty
2221                          * waiting for it and
2222                          * set DCD-bit of its modem-status.
2223                          */
2224                         if (TTY_IS_ACTIVE(info) ||
2225                             (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
2226                                 info->msr |= UART_MSR_DCD;
2227                                 info->emu.charge = 0;
2228                                 if (info->dialing & 0xf)
2229                                         info->last_dir = 1;
2230                                 else
2231                                         info->last_dir = 0;
2232                                 info->dialing = 0;
2233                                 info->rcvsched = 1;
2234                                 if (USG_MODEM(dev->usage[i])) {
2235                                         if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
2236                                                 strcpy(info->emu.connmsg, c->parm.num);
2237                                                 isdn_tty_modem_result(RESULT_CONNECT, info);
2238                                         } else
2239                                                 isdn_tty_modem_result(RESULT_CONNECT64000, info);
2240                                 }
2241                                 if (USG_VOICE(dev->usage[i]))
2242                                         isdn_tty_modem_result(RESULT_VCON, info);
2243                                 return 1;
2244                         }
2245                         break;
2246                 case ISDN_STAT_BHUP:
2247 #ifdef ISDN_TTY_STAT_DEBUG
2248                         printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
2249 #endif
2250                         if (TTY_IS_ACTIVE(info)) {
2251 #ifdef ISDN_DEBUG_MODEM_HUP
2252                                 printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
2253 #endif
2254                                 isdn_tty_modem_hup(info, 0);
2255                                 return 1;
2256                         }
2257                         break;
2258                 case ISDN_STAT_NODCH:
2259 #ifdef ISDN_TTY_STAT_DEBUG
2260                         printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
2261 #endif
2262                         if (TTY_IS_ACTIVE(info)) {
2263                                 if (info->dialing) {
2264                                         info->dialing = 0;
2265                                         info->last_l2 = -1;
2266                                         info->last_si = 0;
2267                                         sprintf(info->last_cause, "0000");
2268                                         isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
2269                                 }
2270                                 isdn_tty_modem_hup(info, 0);
2271                                 return 1;
2272                         }
2273                         break;
2274                 case ISDN_STAT_UNLOAD:
2275 #ifdef ISDN_TTY_STAT_DEBUG
2276                         printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
2277 #endif
2278                         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
2279                                 info = &dev->mdm.info[i];
2280                                 if (info->isdn_driver == c->driver) {
2281                                         if (info->online)
2282                                                 isdn_tty_modem_hup(info, 1);
2283                                 }
2284                         }
2285                         return 1;
2286 #ifdef CONFIG_ISDN_TTY_FAX
2287                 case ISDN_STAT_FAXIND:
2288                         if (TTY_IS_ACTIVE(info)) {
2289                                 isdn_tty_fax_command(info, c);
2290                         }
2291                         break;
2292 #endif
2293 #ifdef CONFIG_ISDN_AUDIO
2294                 case ISDN_STAT_AUDIO:
2295                         if (TTY_IS_ACTIVE(info)) {
2296                                 switch (c->parm.num[0]) {
2297                                 case ISDN_AUDIO_DTMF:
2298                                         if (info->vonline) {
2299                                                 isdn_audio_put_dle_code(info,
2300                                                                         c->parm.num[1]);
2301                                         }
2302                                         break;
2303                                 }
2304                         }
2305                         break;
2306 #endif
2307                 }
2308         }
2309         return 0;
2310 }
2311
2312 /*********************************************************************
2313  Modem-Emulator-Routines
2314 *********************************************************************/
2315
2316 #define cmdchar(c) ((c >= ' ') && (c <= 0x7f))
2317
2318 /*
2319  * Put a message from the AT-emulator into receive-buffer of tty,
2320  * convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
2321  */
2322 void
2323 isdn_tty_at_cout(char *msg, modem_info *info)
2324 {
2325         struct tty_struct *tty;
2326         atemu *m = &info->emu;
2327         char *p;
2328         char c;
2329         u_long flags;
2330         struct sk_buff *skb = NULL;
2331         char *sp = NULL;
2332         int l;
2333
2334         if (!msg) {
2335                 printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
2336                 return;
2337         }
2338
2339         l = strlen(msg);
2340
2341         spin_lock_irqsave(&info->readlock, flags);
2342         tty = info->tty;
2343         if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
2344                 spin_unlock_irqrestore(&info->readlock, flags);
2345                 return;
2346         }
2347
2348         /* use queue instead of direct, if online and */
2349         /* data is in queue or buffer is full */
2350         if (info->online && ((tty_buffer_request_room(tty, l) < l) ||
2351                              !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
2352                 skb = alloc_skb(l, GFP_ATOMIC);
2353                 if (!skb) {
2354                         spin_unlock_irqrestore(&info->readlock, flags);
2355                         return;
2356                 }
2357                 sp = skb_put(skb, l);
2358 #ifdef CONFIG_ISDN_AUDIO
2359                 ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
2360                 ISDN_AUDIO_SKB_LOCK(skb) = 0;
2361 #endif
2362         }
2363
2364         for (p = msg; *p; p++) {
2365                 switch (*p) {
2366                 case '\r':
2367                         c = m->mdmreg[REG_CR];
2368                         break;
2369                 case '\n':
2370                         c = m->mdmreg[REG_LF];
2371                         break;
2372                 case '\b':
2373                         c = m->mdmreg[REG_BS];
2374                         break;
2375                 default:
2376                         c = *p;
2377                 }
2378                 if (skb) {
2379                         *sp++ = c;
2380                 } else {
2381                         if (tty_insert_flip_char(tty, c, TTY_NORMAL) == 0)
2382                                 break;
2383                 }
2384         }
2385         if (skb) {
2386                 __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb);
2387                 dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len;
2388                 spin_unlock_irqrestore(&info->readlock, flags);
2389                 /* Schedule dequeuing */
2390                 if (dev->modempoll && info->rcvsched)
2391                         isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
2392
2393         } else {
2394                 spin_unlock_irqrestore(&info->readlock, flags);
2395                 tty_flip_buffer_push(tty);
2396         }
2397 }
2398
2399 /*
2400  * Perform ATH Hangup
2401  */
2402 static void
2403 isdn_tty_on_hook(modem_info *info)
2404 {
2405         if (info->isdn_channel >= 0) {
2406 #ifdef ISDN_DEBUG_MODEM_HUP
2407                 printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n");
2408 #endif
2409                 isdn_tty_modem_hup(info, 1);
2410         }
2411 }
2412
2413 static void
2414 isdn_tty_off_hook(void)
2415 {
2416         printk(KERN_DEBUG "isdn_tty_off_hook\n");
2417 }
2418
2419 #define PLUSWAIT1 (HZ / 2)      /* 0.5 sec. */
2420 #define PLUSWAIT2 (HZ * 3 / 2)  /* 1.5 sec */
2421
2422 /*
2423  * Check Buffer for Modem-escape-sequence, activate timer-callback to
2424  * isdn_tty_modem_escape() if sequence found.
2425  *
2426  * Parameters:
2427  *   p          pointer to databuffer
2428  *   plus       escape-character
2429  *   count      length of buffer
2430  *   pluscount  count of valid escape-characters so far
2431  *   lastplus   timestamp of last character
2432  */
2433 static void
2434 isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount,
2435                    u_long *lastplus)
2436 {
2437         if (plus > 127)
2438                 return;
2439         if (count > 3) {
2440                 p += count - 3;
2441                 count = 3;
2442                 *pluscount = 0;
2443         }
2444         while (count > 0) {
2445                 if (*(p++) == plus) {
2446                         if ((*pluscount)++) {
2447                                 /* Time since last '+' > 0.5 sec. ? */
2448                                 if (time_after(jiffies, *lastplus + PLUSWAIT1))
2449                                         *pluscount = 1;
2450                         } else {
2451                                 /* Time since last non-'+' < 1.5 sec. ? */
2452                                 if (time_before(jiffies, *lastplus + PLUSWAIT2))
2453                                         *pluscount = 0;
2454                         }
2455                         if ((*pluscount == 3) && (count == 1))
2456                                 isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1);
2457                         if (*pluscount > 3)
2458                                 *pluscount = 1;
2459                 } else
2460                         *pluscount = 0;
2461                 *lastplus = jiffies;
2462                 count--;
2463         }
2464 }
2465
2466 /*
2467  * Return result of AT-emulator to tty-receive-buffer, depending on
2468  * modem-register 12, bit 0 and 1.
2469  * For CONNECT-messages also switch to online-mode.
2470  * For RING-message handle auto-ATA if register 0 != 0
2471  */
2472
2473 static void
2474 isdn_tty_modem_result(int code, modem_info *info)
2475 {
2476         atemu *m = &info->emu;
2477         static char *msg[] =
2478                 {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
2479                  "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
2480                  "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
2481         char s[ISDN_MSNLEN + 10];
2482
2483         switch (code) {
2484         case RESULT_RING:
2485                 m->mdmreg[REG_RINGCNT]++;
2486                 if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
2487                         /* Automatically accept incoming call */
2488                         isdn_tty_cmd_ATA(info);
2489                 break;
2490         case RESULT_NO_CARRIER:
2491 #ifdef ISDN_DEBUG_MODEM_HUP
2492                 printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
2493                        (info->flags & ISDN_ASYNC_CLOSING),
2494                        (!info->tty));
2495 #endif
2496                 m->mdmreg[REG_RINGCNT] = 0;
2497                 del_timer(&info->nc_timer);
2498                 info->ncarrier = 0;
2499                 if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
2500                         return;
2501                 }
2502 #ifdef CONFIG_ISDN_AUDIO
2503                 if (info->vonline & 1) {
2504 #ifdef ISDN_DEBUG_MODEM_VOICE
2505                         printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
2506                                info->line);
2507 #endif
2508                         /* voice-recording, add DLE-ETX */
2509                         isdn_tty_at_cout("\020\003", info);
2510                 }
2511                 if (info->vonline & 2) {
2512 #ifdef ISDN_DEBUG_MODEM_VOICE
2513                         printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
2514                                info->line);
2515 #endif
2516                         /* voice-playing, add DLE-DC4 */
2517                         isdn_tty_at_cout("\020\024", info);
2518                 }
2519 #endif
2520                 break;
2521         case RESULT_CONNECT:
2522         case RESULT_CONNECT64000:
2523                 sprintf(info->last_cause, "0000");
2524                 if (!info->online)
2525                         info->online = 2;
2526                 break;
2527         case RESULT_VCON:
2528 #ifdef ISDN_DEBUG_MODEM_VOICE
2529                 printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
2530                        info->line);
2531 #endif
2532                 sprintf(info->last_cause, "0000");
2533                 if (!info->online)
2534                         info->online = 1;
2535                 break;
2536         } /* switch (code) */
2537
2538         if (m->mdmreg[REG_RESP] & BIT_RESP) {
2539                 /* Show results */
2540                 if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) {
2541                         /* Show numeric results only */
2542                         sprintf(s, "\r\n%d\r\n", code);
2543                         isdn_tty_at_cout(s, info);
2544                 } else {
2545                         if (code == RESULT_RING) {
2546                                 /* return if "show RUNG" and ringcounter>1 */
2547                                 if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
2548                                     (m->mdmreg[REG_RINGCNT] > 1))
2549                                         return;
2550                                 /* print CID, _before_ _every_ ring */
2551                                 if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
2552                                         isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
2553                                         isdn_tty_at_cout(dev->num[info->drv_index], info);
2554                                         if (m->mdmreg[REG_CDN] & BIT_CDN) {
2555                                                 isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2556                                                 isdn_tty_at_cout(info->emu.cpn, info);
2557                                         }
2558                                 }
2559                         }
2560                         isdn_tty_at_cout("\r\n", info);
2561                         isdn_tty_at_cout(msg[code], info);
2562                         switch (code) {
2563                         case RESULT_CONNECT:
2564                                 switch (m->mdmreg[REG_L2PROT]) {
2565                                 case ISDN_PROTO_L2_MODEM:
2566                                         isdn_tty_at_cout(" ", info);
2567                                         isdn_tty_at_cout(m->connmsg, info);
2568                                         break;
2569                                 }
2570                                 break;
2571                         case RESULT_RING:
2572                                 /* Append CPN, if enabled */
2573                                 if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
2574                                         sprintf(s, "/%s", m->cpn);
2575                                         isdn_tty_at_cout(s, info);
2576                                 }
2577                                 /* Print CID only once, _after_ 1st RING */
2578                                 if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
2579                                     (m->mdmreg[REG_RINGCNT] == 1)) {
2580                                         isdn_tty_at_cout("\r\n", info);
2581                                         isdn_tty_at_cout("CALLER NUMBER: ", info);
2582                                         isdn_tty_at_cout(dev->num[info->drv_index], info);
2583                                         if (m->mdmreg[REG_CDN] & BIT_CDN) {
2584                                                 isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2585                                                 isdn_tty_at_cout(info->emu.cpn, info);
2586                                         }
2587                                 }
2588                                 break;
2589                         case RESULT_NO_CARRIER:
2590                         case RESULT_NO_DIALTONE:
2591                         case RESULT_BUSY:
2592                         case RESULT_NO_ANSWER:
2593                                 m->mdmreg[REG_RINGCNT] = 0;
2594                                 /* Append Cause-Message if enabled */
2595                                 if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
2596                                         sprintf(s, "/%s", info->last_cause);
2597                                         isdn_tty_at_cout(s, info);
2598                                 }
2599                                 break;
2600                         case RESULT_CONNECT64000:
2601                                 /* Append Protocol to CONNECT message */
2602                                 switch (m->mdmreg[REG_L2PROT]) {
2603                                 case ISDN_PROTO_L2_X75I:
2604                                 case ISDN_PROTO_L2_X75UI:
2605                                 case ISDN_PROTO_L2_X75BUI:
2606                                         isdn_tty_at_cout("/X.75", info);
2607                                         break;
2608                                 case ISDN_PROTO_L2_HDLC:
2609                                         isdn_tty_at_cout("/HDLC", info);
2610                                         break;
2611                                 case ISDN_PROTO_L2_V11096:
2612                                         isdn_tty_at_cout("/V110/9600", info);
2613                                         break;
2614                                 case ISDN_PROTO_L2_V11019:
2615                                         isdn_tty_at_cout("/V110/19200", info);
2616                                         break;
2617                                 case ISDN_PROTO_L2_V11038:
2618                                         isdn_tty_at_cout("/V110/38400", info);
2619                                         break;
2620                                 }
2621                                 if (m->mdmreg[REG_T70] & BIT_T70) {
2622                                         isdn_tty_at_cout("/T.70", info);
2623                                         if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2624                                                 isdn_tty_at_cout("+", info);
2625                                 }
2626                                 break;
2627                         }
2628                         isdn_tty_at_cout("\r\n", info);
2629                 }
2630         }
2631         if (code == RESULT_NO_CARRIER) {
2632                 if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
2633                         return;
2634                 }
2635                 if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
2636                     (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
2637                        (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
2638                         tty_hangup(info->tty);
2639                 }
2640         }
2641 }
2642
2643
2644 /*
2645  * Display a modem-register-value.
2646  */
2647 static void
2648 isdn_tty_show_profile(int ridx, modem_info *info)
2649 {
2650         char v[6];
2651
2652         sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]);
2653         isdn_tty_at_cout(v, info);
2654 }
2655
2656 /*
2657  * Get MSN-string from char-pointer, set pointer to end of number
2658  */
2659 static void
2660 isdn_tty_get_msnstr(char *n, char **p)
2661 {
2662         int limit = ISDN_MSNLEN - 1;
2663
2664         while (((*p[0] >= '0' && *p[0] <= '9') ||
2665                 /* Why a comma ??? */
2666                 (*p[0] == ',') || (*p[0] == ':')) &&
2667                (limit--))
2668                 *n++ = *p[0]++;
2669         *n = '\0';
2670 }
2671
2672 /*
2673  * Get phone-number from modem-commandbuffer
2674  */
2675 static void
2676 isdn_tty_getdial(char *p, char *q, int cnt)
2677 {
2678         int first = 1;
2679         int limit = ISDN_MSNLEN - 1;    /* MUST match the size of interface var to avoid
2680                                            buffer overflow */
2681
2682         while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) {
2683                 if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) ||
2684                     ((*p == 'R') && first) ||
2685                     (*p == '*') || (*p == '#')) {
2686                         *q++ = *p;
2687                         limit--;
2688                 }
2689                 if (!limit)
2690                         break;
2691                 p++;
2692                 first = 0;
2693         }
2694         *q = 0;
2695 }
2696
2697 #define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; }
2698 #define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; }
2699
2700 static void
2701 isdn_tty_report(modem_info *info)
2702 {
2703         atemu *m = &info->emu;
2704         char s[80];
2705
2706         isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info);
2707         sprintf(s, "    Remote Number:    %s\r\n", info->last_num);
2708         isdn_tty_at_cout(s, info);
2709         sprintf(s, "    Direction:        %s\r\n", info->last_dir ? "outgoing" : "incoming");
2710         isdn_tty_at_cout(s, info);
2711         isdn_tty_at_cout("    Layer-2 Protocol: ", info);
2712         switch (info->last_l2) {
2713         case ISDN_PROTO_L2_X75I:
2714                 isdn_tty_at_cout("X.75i", info);
2715                 break;
2716         case ISDN_PROTO_L2_X75UI:
2717                 isdn_tty_at_cout("X.75ui", info);
2718                 break;
2719         case ISDN_PROTO_L2_X75BUI:
2720                 isdn_tty_at_cout("X.75bui", info);
2721                 break;
2722         case ISDN_PROTO_L2_HDLC:
2723                 isdn_tty_at_cout("HDLC", info);
2724                 break;
2725         case ISDN_PROTO_L2_V11096:
2726                 isdn_tty_at_cout("V.110 9600 Baud", info);
2727                 break;
2728         case ISDN_PROTO_L2_V11019:
2729                 isdn_tty_at_cout("V.110 19200 Baud", info);
2730                 break;
2731         case ISDN_PROTO_L2_V11038:
2732                 isdn_tty_at_cout("V.110 38400 Baud", info);
2733                 break;
2734         case ISDN_PROTO_L2_TRANS:
2735                 isdn_tty_at_cout("transparent", info);
2736                 break;
2737         case ISDN_PROTO_L2_MODEM:
2738                 isdn_tty_at_cout("modem", info);
2739                 break;
2740         case ISDN_PROTO_L2_FAX:
2741                 isdn_tty_at_cout("fax", info);
2742                 break;
2743         default:
2744                 isdn_tty_at_cout("unknown", info);
2745                 break;
2746         }
2747         if (m->mdmreg[REG_T70] & BIT_T70) {
2748                 isdn_tty_at_cout("/T.70", info);
2749                 if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2750                         isdn_tty_at_cout("+", info);
2751         }
2752         isdn_tty_at_cout("\r\n", info);
2753         isdn_tty_at_cout("    Service:          ", info);
2754         switch (info->last_si) {
2755         case 1:
2756                 isdn_tty_at_cout("audio\r\n", info);
2757                 break;
2758         case 5:
2759                 isdn_tty_at_cout("btx\r\n", info);
2760                 break;
2761         case 7:
2762                 isdn_tty_at_cout("data\r\n", info);
2763                 break;
2764         default:
2765                 sprintf(s, "%d\r\n", info->last_si);
2766                 isdn_tty_at_cout(s, info);
2767                 break;
2768         }
2769         sprintf(s, "    Hangup location:  %s\r\n", info->last_lhup ? "local" : "remote");
2770         isdn_tty_at_cout(s, info);
2771         sprintf(s, "    Last cause:       %s\r\n", info->last_cause);
2772         isdn_tty_at_cout(s, info);
2773 }
2774
2775 /*
2776  * Parse AT&.. commands.
2777  */
2778 static int
2779 isdn_tty_cmd_ATand(char **p, modem_info *info)
2780 {
2781         atemu *m = &info->emu;
2782         int i;
2783         char rb[100];
2784
2785 #define MAXRB (sizeof(rb) - 1)
2786
2787         switch (*p[0]) {
2788         case 'B':
2789                 /* &B - Set Buffersize */
2790                 p[0]++;
2791                 i = isdn_getnum(p);
2792                 if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
2793                         PARSE_ERROR1;
2794 #ifdef CONFIG_ISDN_AUDIO
2795                 if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
2796                         PARSE_ERROR1;
2797 #endif
2798                 m->mdmreg[REG_PSIZE] = i / 16;
2799                 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2800                 switch (m->mdmreg[REG_L2PROT]) {
2801                 case ISDN_PROTO_L2_V11096:
2802                 case ISDN_PROTO_L2_V11019:
2803                 case ISDN_PROTO_L2_V11038:
2804                         info->xmit_size /= 10;
2805                 }
2806                 break;
2807         case 'C':
2808                 /* &C - DCD Status */
2809                 p[0]++;
2810                 switch (isdn_getnum(p)) {
2811                 case 0:
2812                         m->mdmreg[REG_DCD] &= ~BIT_DCD;
2813                         break;
2814                 case 1:
2815                         m->mdmreg[REG_DCD] |= BIT_DCD;
2816                         break;
2817                 default:
2818                         PARSE_ERROR1
2819                                 }
2820                 break;
2821         case 'D':
2822                 /* &D - Set DTR-Low-behavior */
2823                 p[0]++;
2824                 switch (isdn_getnum(p)) {
2825                 case 0:
2826                         m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
2827                         m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2828                         break;
2829                 case 2:
2830                         m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2831                         m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2832                         break;
2833                 case 3:
2834                         m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2835                         m->mdmreg[REG_DTRR] |= BIT_DTRR;
2836                         break;
2837                 default:
2838                         PARSE_ERROR1
2839                                 }
2840                 break;
2841         case 'E':
2842                 /* &E -Set EAZ/MSN */
2843                 p[0]++;
2844                 isdn_tty_get_msnstr(m->msn, p);
2845                 break;
2846         case 'F':
2847                 /* &F -Set Factory-Defaults */
2848                 p[0]++;
2849                 if (info->msr & UART_MSR_DCD)
2850                         PARSE_ERROR1;
2851                 isdn_tty_reset_profile(m);
2852                 isdn_tty_modem_reset_regs(info, 1);
2853                 break;
2854 #ifdef DUMMY_HAYES_AT
2855         case 'K':
2856                 /* only for be compilant with common scripts */
2857                 /* &K Flowcontrol - no function */
2858                 p[0]++;
2859                 isdn_getnum(p);
2860                 break;
2861 #endif
2862         case 'L':
2863                 /* &L -Set Numbers to listen on */
2864                 p[0]++;
2865                 i = 0;
2866                 while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
2867                        (i < ISDN_LMSNLEN - 1))
2868                         m->lmsn[i++] = *p[0]++;
2869                 m->lmsn[i] = '\0';
2870                 break;
2871         case 'R':
2872                 /* &R - Set V.110 bitrate adaption */
2873                 p[0]++;
2874                 i = isdn_getnum(p);
2875                 switch (i) {
2876                 case 0:
2877                         /* Switch off V.110, back to X.75 */
2878                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2879                         m->mdmreg[REG_SI2] = 0;
2880                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2881                         break;
2882                 case 9600:
2883                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
2884                         m->mdmreg[REG_SI2] = 197;
2885                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2886                         break;
2887                 case 19200:
2888                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
2889                         m->mdmreg[REG_SI2] = 199;
2890                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2891                         break;
2892                 case 38400:
2893                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
2894                         m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
2895                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2896                         break;
2897                 default:
2898                         PARSE_ERROR1;
2899                 }
2900                 /* Switch off T.70 */
2901                 m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2902                 /* Set Service 7 */
2903                 m->mdmreg[REG_SI1] |= 4;
2904                 break;
2905         case 'S':
2906                 /* &S - Set Windowsize */
2907                 p[0]++;
2908                 i = isdn_getnum(p);
2909                 if ((i > 0) && (i < 9))
2910                         m->mdmreg[REG_WSIZE] = i;
2911                 else
2912                         PARSE_ERROR1;
2913                 break;
2914         case 'V':
2915                 /* &V - Show registers */
2916                 p[0]++;
2917                 isdn_tty_at_cout("\r\n", info);
2918                 for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
2919                         sprintf(rb, "S%02d=%03d%s", i,
2920                                 m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
2921                         isdn_tty_at_cout(rb, info);
2922                 }
2923                 sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
2924                         strlen(m->msn) ? m->msn : "None");
2925                 isdn_tty_at_cout(rb, info);
2926                 if (strlen(m->lmsn)) {
2927                         isdn_tty_at_cout("\r\nListen: ", info);
2928                         isdn_tty_at_cout(m->lmsn, info);
2929                         isdn_tty_at_cout("\r\n", info);
2930                 }
2931                 break;
2932         case 'W':
2933                 /* &W - Write Profile */
2934                 p[0]++;
2935                 switch (*p[0]) {
2936                 case '0':
2937                         p[0]++;
2938                         modem_write_profile(m);
2939                         break;
2940                 default:
2941                         PARSE_ERROR1;
2942                 }
2943                 break;
2944         case 'X':
2945                 /* &X - Switch to BTX-Mode and T.70 */
2946                 p[0]++;
2947                 switch (isdn_getnum(p)) {
2948                 case 0:
2949                         m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2950                         info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2951                         break;
2952                 case 1:
2953                         m->mdmreg[REG_T70] |= BIT_T70;
2954                         m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
2955                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2956                         info->xmit_size = 112;
2957                         m->mdmreg[REG_SI1] = 4;
2958                         m->mdmreg[REG_SI2] = 0;
2959                         break;
2960                 case 2:
2961                         m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
2962                         m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2963                         info->xmit_size = 112;
2964                         m->mdmreg[REG_SI1] = 4;
2965                         m->mdmreg[REG_SI2] = 0;
2966                         break;
2967                 default:
2968                         PARSE_ERROR1;
2969                 }
2970                 break;
2971         default:
2972                 PARSE_ERROR1;
2973         }
2974         return 0;
2975 }
2976
2977 static int
2978 isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m)
2979 {
2980         /* Some plausibility checks */
2981         switch (mreg) {
2982         case REG_L2PROT:
2983                 if (mval > ISDN_PROTO_L2_MAX)
2984                         return 1;
2985                 break;
2986         case REG_PSIZE:
2987                 if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
2988                         return 1;
2989 #ifdef CONFIG_ISDN_AUDIO
2990                 if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
2991                         return 1;
2992 #endif
2993                 info->xmit_size = mval * 16;
2994                 switch (m->mdmreg[REG_L2PROT]) {
2995                 case ISDN_PROTO_L2_V11096:
2996                 case ISDN_PROTO_L2_V11019:
2997                 case ISDN_PROTO_L2_V11038:
2998                         info->xmit_size /= 10;
2999                 }
3000                 break;
3001         case REG_SI1I:
3002         case REG_PLAN:
3003         case REG_SCREEN:
3004                 /* readonly registers */
3005                 return 1;
3006         }
3007         return 0;
3008 }
3009
3010 /*
3011  * Perform ATS command
3012  */
3013 static int
3014 isdn_tty_cmd_ATS(char **p, modem_info *info)
3015 {
3016         atemu *m = &info->emu;
3017         int bitpos;
3018         int mreg;
3019         int mval;
3020         int bval;
3021
3022         mreg = isdn_getnum(p);
3023         if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG)
3024                 PARSE_ERROR1;
3025         switch (*p[0]) {
3026         case '=':
3027                 p[0]++;
3028                 mval = isdn_getnum(p);
3029                 if (mval < 0 || mval > 255)
3030                         PARSE_ERROR1;
3031                 if (isdn_tty_check_ats(mreg, mval, info, m))
3032                         PARSE_ERROR1;
3033                 m->mdmreg[mreg] = mval;
3034                 break;
3035         case '.':
3036                 /* Set/Clear a single bit */
3037                 p[0]++;
3038                 bitpos = isdn_getnum(p);
3039                 if ((bitpos < 0) || (bitpos > 7))
3040                         PARSE_ERROR1;
3041                 switch (*p[0]) {
3042                 case '=':
3043                         p[0]++;
3044                         bval = isdn_getnum(p);
3045                         if (bval < 0 || bval > 1)
3046                                 PARSE_ERROR1;
3047                         if (bval)
3048                                 mval = m->mdmreg[mreg] | (1 << bitpos);
3049                         else
3050                                 mval = m->mdmreg[mreg] & ~(1 << bitpos);
3051                         if (isdn_tty_check_ats(mreg, mval, info, m))
3052                                 PARSE_ERROR1;
3053                         m->mdmreg[mreg] = mval;
3054                         break;
3055                 case '?':
3056                         p[0]++;
3057                         isdn_tty_at_cout("\r\n", info);
3058                         isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
3059                                          info);
3060                         break;
3061                 default:
3062                         PARSE_ERROR1;
3063                 }
3064                 break;
3065         case '?':
3066                 p[0]++;
3067                 isdn_tty_show_profile(mreg, info);
3068                 break;
3069         default:
3070                 PARSE_ERROR1;
3071                 break;
3072         }
3073         return 0;
3074 }
3075
3076 /*
3077  * Perform ATA command
3078  */
3079 static void
3080 isdn_tty_cmd_ATA(modem_info *info)
3081 {
3082         atemu *m = &info->emu;
3083         isdn_ctrl cmd;
3084         int l2;
3085
3086         if (info->msr & UART_MSR_RI) {
3087                 /* Accept incoming call */
3088                 info->last_dir = 0;
3089                 strcpy(info->last_num, dev->num[info->drv_index]);
3090                 m->mdmreg[REG_RINGCNT] = 0;
3091                 info->msr &= ~UART_MSR_RI;
3092                 l2 = m->mdmreg[REG_L2PROT];
3093 #ifdef CONFIG_ISDN_AUDIO
3094                 /* If more than one bit set in reg18, autoselect Layer2 */
3095                 if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) {
3096                         if (m->mdmreg[REG_SI1I] == 1) {
3097                                 if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX))
3098                                         l2 = ISDN_PROTO_L2_TRANS;
3099                         } else
3100                                 l2 = ISDN_PROTO_L2_X75I;
3101                 }
3102 #endif
3103                 cmd.driver = info->isdn_driver;
3104                 cmd.command = ISDN_CMD_SETL2;
3105                 cmd.arg = info->isdn_channel + (l2 << 8);
3106                 info->last_l2 = l2;
3107                 isdn_command(&cmd);
3108                 cmd.driver = info->isdn_driver;
3109                 cmd.command = ISDN_CMD_SETL3;
3110                 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
3111 #ifdef CONFIG_ISDN_TTY_FAX
3112                 if (l2 == ISDN_PROTO_L2_FAX) {
3113                         cmd.parm.fax = info->fax;
3114                         info->fax->direction = ISDN_TTY_FAX_CONN_IN;
3115                 }
3116 #endif
3117                 isdn_command(&cmd);
3118                 cmd.driver = info->isdn_driver;
3119                 cmd.arg = info->isdn_channel;
3120                 cmd.command = ISDN_CMD_ACCEPTD;
3121                 info->dialing = 16;
3122                 info->emu.carrierwait = 0;
3123                 isdn_command(&cmd);
3124                 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
3125         } else
3126                 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3127 }
3128
3129 #ifdef CONFIG_ISDN_AUDIO
3130 /*
3131  * Parse AT+F.. commands
3132  */
3133 static int
3134 isdn_tty_cmd_PLUSF(char **p, modem_info *info)
3135 {
3136         atemu *m = &info->emu;
3137         char rs[20];
3138
3139         if (!strncmp(p[0], "CLASS", 5)) {
3140                 p[0] += 5;
3141                 switch (*p[0]) {
3142                 case '?':
3143                         p[0]++;
3144                         sprintf(rs, "\r\n%d",
3145                                 (m->mdmreg[REG_SI1] & 1) ? 8 : 0);
3146 #ifdef CONFIG_ISDN_TTY_FAX
3147                         if (TTY_IS_FCLASS2(info))
3148                                 sprintf(rs, "\r\n2");
3149                         else if (TTY_IS_FCLASS1(info))
3150                                 sprintf(rs, "\r\n1");
3151 #endif
3152                         isdn_tty_at_cout(rs, info);
3153                         break;
3154                 case '=':
3155                         p[0]++;
3156                         switch (*p[0]) {
3157                         case '0':
3158                                 p[0]++;
3159                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3160                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3161                                 m->mdmreg[REG_SI1] = 4;
3162                                 info->xmit_size =
3163                                         m->mdmreg[REG_PSIZE] * 16;
3164                                 break;
3165 #ifdef CONFIG_ISDN_TTY_FAX
3166                         case '1':
3167                                 p[0]++;
3168                                 if (!(dev->global_features &
3169                                       ISDN_FEATURE_L3_FCLASS1))
3170                                         PARSE_ERROR1;
3171                                 m->mdmreg[REG_SI1] = 1;
3172                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3173                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
3174                                 info->xmit_size =
3175                                         m->mdmreg[REG_PSIZE] * 16;
3176                                 break;
3177                         case '2':
3178                                 p[0]++;
3179                                 if (!(dev->global_features &
3180                                       ISDN_FEATURE_L3_FCLASS2))
3181                                         PARSE_ERROR1;
3182                                 m->mdmreg[REG_SI1] = 1;
3183                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3184                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
3185                                 info->xmit_size =
3186                                         m->mdmreg[REG_PSIZE] * 16;
3187                                 break;
3188 #endif
3189                         case '8':
3190                                 p[0]++;
3191                                 /* L2 will change on dialout with si=1 */
3192                                 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3193                                 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3194                                 m->mdmreg[REG_SI1] = 5;
3195                                 info->xmit_size = VBUF;
3196                                 break;
3197                         case '?':
3198                                 p[0]++;
3199                                 strcpy(rs, "\r\n0,");
3200 #ifdef CONFIG_ISDN_TTY_FAX
3201                                 if (dev->global_features &
3202                                     ISDN_FEATURE_L3_FCLASS1)
3203                                         strcat(rs, "1,");
3204                                 if (dev->global_features &
3205                                     ISDN_FEATURE_L3_FCLASS2)
3206                                         strcat(rs, "2,");
3207 #endif
3208                                 strcat(rs, "8");
3209                                 isdn_tty_at_cout(rs, info);
3210                                 break;
3211                         default:
3212                                 PARSE_ERROR1;
3213                         }
3214                         break;
3215                 default:
3216                         PARSE_ERROR1;
3217                 }
3218                 return 0;
3219         }
3220 #ifdef CONFIG_ISDN_TTY_FAX
3221         return (isdn_tty_cmd_PLUSF_FAX(p, info));
3222 #else
3223         PARSE_ERROR1;
3224 #endif
3225 }
3226
3227 /*
3228  * Parse AT+V.. commands
3229  */
3230 static int
3231 isdn_tty_cmd_PLUSV(char **p, modem_info *info)
3232 {
3233         atemu *m = &info->emu;
3234         isdn_ctrl cmd;
3235         static char *vcmd[] =
3236                 {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
3237         int i;
3238         int par1;
3239         int par2;
3240         char rs[20];
3241
3242         i = 0;
3243         while (vcmd[i]) {
3244                 if (!strncmp(vcmd[i], p[0], 2)) {
3245                         p[0] += 2;
3246                         break;
3247                 }
3248                 i++;
3249         }
3250         switch (i) {
3251         case 0:
3252                 /* AT+VNH - Auto hangup feature */
3253                 switch (*p[0]) {
3254                 case '?':
3255                         p[0]++;
3256                         isdn_tty_at_cout("\r\n1", info);
3257                         break;
3258                 case '=':
3259                         p[0]++;
3260                         switch (*p[0]) {
3261                         case '1':
3262                                 p[0]++;
3263                                 break;
3264                         case '?':
3265                                 p[0]++;
3266                                 isdn_tty_at_cout("\r\n1", info);
3267                                 break;
3268                         default:
3269                                 PARSE_ERROR1;
3270                         }
3271                         break;
3272                 default:
3273                         PARSE_ERROR1;
3274                 }
3275                 break;
3276         case 1:
3277                 /* AT+VIP - Reset all voice parameters */
3278                 isdn_tty_modem_reset_vpar(m);
3279                 break;
3280         case 2:
3281                 /* AT+VLS - Select device, accept incoming call */
3282                 switch (*p[0]) {
3283                 case '?':
3284                         p[0]++;
3285                         sprintf(rs, "\r\n%d", m->vpar[0]);
3286                         isdn_tty_at_cout(rs, info);
3287                         break;
3288                 case '=':
3289                         p[0]++;
3290                         switch (*p[0]) {
3291                         case '0':
3292                                 p[0]++;
3293                                 m->vpar[0] = 0;
3294                                 break;
3295                         case '2':
3296                                 p[0]++;
3297                                 m->vpar[0] = 2;
3298                                 break;
3299                         case '?':
3300                                 p[0]++;
3301                                 isdn_tty_at_cout("\r\n0,2", info);
3302                                 break;
3303                         default:
3304                                 PARSE_ERROR1;
3305                         }
3306                         break;
3307                 default:
3308                         PARSE_ERROR1;
3309                 }
3310                 break;
3311         case 3:
3312                 /* AT+VRX - Start recording */
3313                 if (!m->vpar[0])
3314                         PARSE_ERROR1;
3315                 if (info->online != 1) {
3316                         isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3317                         return 1;
3318                 }
3319                 info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3320                 if (!info->dtmf_state) {
3321                         printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3322                         PARSE_ERROR1;
3323                 }
3324                 info->silence_state = isdn_audio_silence_init(info->silence_state);
3325                 if (!info->silence_state) {
3326                         printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
3327                         PARSE_ERROR1;
3328                 }
3329                 if (m->vpar[3] < 5) {
3330                         info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
3331                         if (!info->adpcmr) {
3332                                 printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3333                                 PARSE_ERROR1;
3334                         }
3335                 }
3336 #ifdef ISDN_DEBUG_AT
3337                 printk(KERN_DEBUG "AT: +VRX\n");
3338 #endif
3339                 info->vonline |= 1;
3340                 isdn_tty_modem_result(RESULT_CONNECT, info);
3341                 return 0;
3342                 break;
3343         case 4:
3344                 /* AT+VSD - Silence detection */
3345                 switch (*p[0]) {
3346                 case '?':
3347                         p[0]++;
3348                         sprintf(rs, "\r\n<%d>,<%d>",
3349                                 m->vpar[1],
3350                                 m->vpar[2]);
3351                         isdn_tty_at_cout(rs, info);
3352                         break;
3353                 case '=':
3354                         p[0]++;
3355                         if ((*p[0] >= '0') && (*p[0] <= '9')) {
3356                                 par1 = isdn_getnum(p);
3357                                 if ((par1 < 0) || (par1 > 31))
3358                                         PARSE_ERROR1;
3359                                 if (*p[0] != ',')
3360                                         PARSE_ERROR1;
3361                                 p[0]++;
3362                                 par2 = isdn_getnum(p);
3363                                 if ((par2 < 0) || (par2 > 255))
3364                                         PARSE_ERROR1;
3365                                 m->vpar[1] = par1;
3366                                 m->vpar[2] = par2;
3367                                 break;
3368                         } else
3369                                 if (*p[0] == '?') {
3370                                         p[0]++;
3371                                         isdn_tty_at_cout("\r\n<0-31>,<0-255>",
3372                                                          info);
3373                                         break;
3374                                 } else
3375                                         PARSE_ERROR1;
3376                         break;
3377                 default:
3378                         PARSE_ERROR1;
3379                 }
3380                 break;
3381         case 5:
3382                 /* AT+VSM - Select compression */
3383                 switch (*p[0]) {
3384                 case '?':
3385                         p[0]++;
3386                         sprintf(rs, "\r\n<%d>,<%d><8000>",
3387                                 m->vpar[3],
3388                                 m->vpar[1]);
3389                         isdn_tty_at_cout(rs, info);
3390                         break;
3391                 case '=':
3392                         p[0]++;
3393                         switch (*p[0]) {
3394                         case '2':
3395                         case '3':
3396                         case '4':
3397                         case '5':
3398                         case '6':
3399                                 par1 = isdn_getnum(p);
3400                                 if ((par1 < 2) || (par1 > 6))
3401                                         PARSE_ERROR1;
3402                                 m->vpar[3] = par1;
3403                                 break;
3404                         case '?':
3405                                 p[0]++;
3406                                 isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
3407                                                  info);
3408                                 isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
3409                                                  info);
3410                                 isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
3411                                                  info);
3412                                 isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
3413                                                  info);
3414                                 isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
3415                                                  info);
3416                                 break;
3417                         default:
3418                                 PARSE_ERROR1;
3419                         }
3420                         break;
3421                 default:
3422                         PARSE_ERROR1;
3423                 }
3424                 break;
3425         case 6:
3426                 /* AT+VTX - Start sending */
3427                 if (!m->vpar[0])
3428                         PARSE_ERROR1;
3429                 if (info->online != 1) {
3430                         isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3431                         return 1;
3432                 }
3433                 info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3434                 if (!info->dtmf_state) {
3435                         printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3436                         PARSE_ERROR1;
3437                 }
3438                 if (m->vpar[3] < 5) {
3439                         info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
3440                         if (!info->adpcms) {
3441                                 printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3442                                 PARSE_ERROR1;
3443                         }
3444                 }
3445 #ifdef ISDN_DEBUG_AT
3446                 printk(KERN_DEBUG "AT: +VTX\n");
3447 #endif
3448                 m->lastDLE = 0;
3449                 info->vonline |= 2;
3450                 isdn_tty_modem_result(RESULT_CONNECT, info);
3451                 return 0;
3452                 break;
3453         case 7:
3454                 /* AT+VDD - DTMF detection */
3455                 switch (*p[0]) {
3456                 case '?':
3457                         p[0]++;
3458                         sprintf(rs, "\r\n<%d>,<%d>",
3459                                 m->vpar[4],
3460                                 m->vpar[5]);
3461                         isdn_tty_at_cout(rs, info);
3462                         break;
3463                 case '=':
3464                         p[0]++;
3465                         if ((*p[0] >= '0') && (*p[0] <= '9')) {
3466                                 if (info->online != 1)
3467                                         PARSE_ERROR1;
3468                                 par1 = isdn_getnum(p);
3469                                 if ((par1 < 0) || (par1 > 15))
3470                                         PARSE_ERROR1;
3471                                 if (*p[0] != ',')
3472                                         PARSE_ERROR1;
3473                                 p[0]++;
3474                                 par2 = isdn_getnum(p);
3475                                 if ((par2 < 0) || (par2 > 255))
3476                                         PARSE_ERROR1;
3477                                 m->vpar[4] = par1;
3478                                 m->vpar[5] = par2;
3479                                 cmd.driver = info->isdn_driver;
3480                                 cmd.command = ISDN_CMD_AUDIO;
3481                                 cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
3482                                 cmd.parm.num[0] = par1;
3483                                 cmd.parm.num[1] = par2;
3484                                 isdn_command(&cmd);
3485                                 break;
3486                         } else
3487                                 if (*p[0] == '?') {
3488                                         p[0]++;
3489                                         isdn_tty_at_cout("\r\n<0-15>,<0-255>",
3490                                                          info);
3491                                         break;
3492                                 } else
3493                                         PARSE_ERROR1;
3494                         break;
3495                 default:
3496                         PARSE_ERROR1;
3497                 }
3498                 break;
3499         default:
3500                 PARSE_ERROR1;
3501         }
3502         return 0;
3503 }
3504 #endif                          /* CONFIG_ISDN_AUDIO */
3505
3506 /*
3507  * Parse and perform an AT-command-line.
3508  */
3509 static void
3510 isdn_tty_parse_at(modem_info *info)
3511 {
3512         atemu *m = &info->emu;
3513         char *p;
3514         char ds[ISDN_MSNLEN];
3515
3516 #ifdef ISDN_DEBUG_AT
3517         printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd);
3518 #endif
3519         for (p = &m->mdmcmd[2]; *p;) {
3520                 switch (*p) {
3521                 case ' ':
3522                         p++;
3523                         break;
3524                 case 'A':
3525                         /* A - Accept incoming call */
3526                         p++;
3527                         isdn_tty_cmd_ATA(info);
3528                         return;
3529                         break;
3530                 case 'D':
3531                         /* D - Dial */
3532                         if (info->msr & UART_MSR_DCD)
3533                                 PARSE_ERROR;
3534                         if (info->msr & UART_MSR_RI) {
3535                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3536                                 return;
3537                         }
3538                         isdn_tty_getdial(++p, ds, sizeof ds);
3539                         p += strlen(p);
3540                         if (!strlen(m->msn))
3541                                 isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
3542                         else if (strlen(ds))
3543                                 isdn_tty_dial(ds, info, m);
3544                         else
3545                                 PARSE_ERROR;
3546                         return;
3547                 case 'E':
3548                         /* E - Turn Echo on/off */
3549                         p++;
3550                         switch (isdn_getnum(&p)) {
3551                         case 0:
3552                                 m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
3553                                 break;
3554                         case 1:
3555                                 m->mdmreg[REG_ECHO] |= BIT_ECHO;
3556                                 break;
3557                         default:
3558                                 PARSE_ERROR;
3559                         }
3560                         break;
3561                 case 'H':
3562                         /* H - On/Off-hook */
3563                         p++;
3564                         switch (*p) {
3565                         case '0':
3566                                 p++;
3567                                 isdn_tty_on_hook(info);
3568                                 break;
3569                         case '1':
3570                                 p++;
3571                                 isdn_tty_off_hook();
3572                                 break;
3573                         default:
3574                                 isdn_tty_on_hook(info);
3575                                 break;
3576                         }
3577                         break;
3578                 case 'I':
3579                         /* I - Information */
3580                         p++;
3581                         isdn_tty_at_cout("\r\nLinux ISDN", info);
3582                         switch (*p) {
3583                         case '0':
3584                         case '1':
3585                                 p++;
3586                                 break;
3587                         case '2':
3588                                 p++;
3589                                 isdn_tty_report(info);
3590                                 break;
3591                         case '3':
3592                                 p++;
3593                                 snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge);
3594                                 isdn_tty_at_cout(ds, info);
3595                                 break;
3596                         default:;
3597                         }
3598                         break;
3599 #ifdef DUMMY_HAYES_AT
3600                 case 'L':
3601                 case 'M':
3602                         /* only for be compilant with common scripts */
3603                         /* no function */
3604                         p++;
3605                         isdn_getnum(&p);
3606                         break;
3607 #endif
3608                 case 'O':
3609                         /* O - Go online */
3610                         p++;
3611                         if (info->msr & UART_MSR_DCD)
3612                                 /* if B-Channel is up */
3613                                 isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info);
3614                         else
3615                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3616                         return;
3617                 case 'Q':
3618                         /* Q - Turn Emulator messages on/off */
3619                         p++;
3620                         switch (isdn_getnum(&p)) {
3621                         case 0:
3622                                 m->mdmreg[REG_RESP] |= BIT_RESP;
3623                                 break;
3624                         case 1:
3625                                 m->mdmreg[REG_RESP] &= ~BIT_RESP;
3626                                 break;
3627                         default:
3628                                 PARSE_ERROR;
3629                         }
3630                         break;
3631                 case 'S':
3632                         /* S - Set/Get Register */
3633                         p++;
3634                         if (isdn_tty_cmd_ATS(&p, info))
3635                                 return;
3636                         break;
3637                 case 'V':
3638                         /* V - Numeric or ASCII Emulator-messages */
3639                         p++;
3640                         switch (isdn_getnum(&p)) {
3641                         case 0:
3642                                 m->mdmreg[REG_RESP] |= BIT_RESPNUM;
3643                                 break;
3644                         case 1:
3645                                 m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
3646                                 break;
3647                         default:
3648                                 PARSE_ERROR;
3649                         }
3650                         break;
3651                 case 'Z':
3652                         /* Z - Load Registers from Profile */
3653                         p++;
3654                         if (info->msr & UART_MSR_DCD) {
3655                                 info->online = 0;
3656                                 isdn_tty_on_hook(info);
3657                         }
3658                         isdn_tty_modem_reset_regs(info, 1);
3659                         break;
3660                 case '+':
3661                         p++;
3662                         switch (*p) {
3663 #ifdef CONFIG_ISDN_AUDIO
3664                         case 'F':
3665                                 p++;
3666                                 if (isdn_tty_cmd_PLUSF(&p, info))
3667                                         return;
3668                                 break;
3669                         case 'V':
3670                                 if ((!(m->mdmreg[REG_SI1] & 1)) ||
3671                                     (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
3672                                         PARSE_ERROR;
3673                                 p++;
3674                                 if (isdn_tty_cmd_PLUSV(&p, info))
3675                                         return;
3676                                 break;
3677 #endif                          /* CONFIG_ISDN_AUDIO */
3678                         case 'S':       /* SUSPEND */
3679                                 p++;
3680                                 isdn_tty_get_msnstr(ds, &p);
3681                                 isdn_tty_suspend(ds, info, m);
3682                                 break;
3683                         case 'R':       /* RESUME */
3684                                 p++;
3685                                 isdn_tty_get_msnstr(ds, &p);
3686                                 isdn_tty_resume(ds, info, m);
3687                                 break;
3688                         case 'M':       /* MESSAGE */
3689                                 p++;
3690                                 isdn_tty_send_msg(info, m, p);
3691                                 break;
3692                         default:
3693                                 PARSE_ERROR;
3694                         }
3695                         break;
3696                 case '&':
3697                         p++;
3698                         if (isdn_tty_cmd_ATand(&p, info))
3699                                 return;
3700                         break;
3701                 default:
3702                         PARSE_ERROR;
3703                 }
3704         }
3705 #ifdef CONFIG_ISDN_AUDIO
3706         if (!info->vonline)
3707 #endif
3708                 isdn_tty_modem_result(RESULT_OK, info);
3709 }
3710
3711 /* Need own toupper() because standard-toupper is not available
3712  * within modules.
3713  */
3714 #define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c)
3715
3716 /*
3717  * Perform line-editing of AT-commands
3718  *
3719  * Parameters:
3720  *   p        inputbuffer
3721  *   count    length of buffer
3722  *   channel  index to line (minor-device)
3723  */
3724 static int
3725 isdn_tty_edit_at(const char *p, int count, modem_info *info)
3726 {
3727         atemu *m = &info->emu;
3728         int total = 0;
3729         u_char c;
3730         char eb[2];
3731         int cnt;
3732
3733         for (cnt = count; cnt > 0; p++, cnt--) {
3734                 c = *p;
3735                 total++;
3736                 if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) {
3737                         /* Separator (CR or LF) */
3738                         m->mdmcmd[m->mdmcmdl] = 0;
3739                         if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3740                                 eb[0] = c;
3741                                 eb[1] = 0;
3742                                 isdn_tty_at_cout(eb, info);
3743                         }
3744                         if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2))))
3745                                 isdn_tty_parse_at(info);
3746                         m->mdmcmdl = 0;
3747                         continue;
3748                 }
3749                 if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) {
3750                         /* Backspace-Function */
3751                         if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) {
3752                                 if (m->mdmcmdl)
3753                                         m->mdmcmdl--;
3754                                 if (m->mdmreg[REG_ECHO] & BIT_ECHO)
3755                                         isdn_tty_at_cout("\b", info);
3756                         }
3757                         continue;
3758                 }
3759                 if (cmdchar(c)) {
3760                         if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3761                                 eb[0] = c;
3762                                 eb[1] = 0;
3763                                 isdn_tty_at_cout(eb, info);
3764                         }
3765                         if (m->mdmcmdl < 255) {
3766                                 c = my_toupper(c);
3767                                 switch (m->mdmcmdl) {
3768                                 case 1:
3769                                         if (c == 'T') {
3770                                                 m->mdmcmd[m->mdmcmdl] = c;
3771                                                 m->mdmcmd[++m->mdmcmdl] = 0;
3772                                                 break;
3773                                         } else
3774                                                 m->mdmcmdl = 0;
3775                                         /* Fall through, check for 'A' */
3776                                 case 0:
3777                                         if (c == 'A') {
3778                                                 m->mdmcmd[m->mdmcmdl] = c;
3779                                                 m->mdmcmd[++m->mdmcmdl] = 0;
3780                                         }
3781                                         break;
3782                                 default:
3783                                         m->mdmcmd[m->mdmcmdl] = c;
3784                                         m->mdmcmd[++m->mdmcmdl] = 0;
3785                                 }
3786                         }
3787                 }
3788         }
3789         return total;
3790 }
3791
3792 /*
3793  * Switch all modem-channels who are online and got a valid
3794  * escape-sequence 1.5 seconds ago, to command-mode.
3795  * This function is called every second via timer-interrupt from within
3796  * timer-dispatcher isdn_timer_function()
3797  */
3798 void
3799 isdn_tty_modem_escape(void)
3800 {
3801         int ton = 0;
3802         int i;
3803         int midx;
3804
3805         for (i = 0; i < ISDN_MAX_CHANNELS; i++)
3806                 if (USG_MODEM(dev->usage[i]))
3807                         if ((midx = dev->m_idx[i]) >= 0) {
3808                                 modem_info *info = &dev->mdm.info[midx];
3809                                 if (info->online) {
3810                                         ton = 1;
3811                                         if ((info->emu.pluscount == 3) &&
3812                                             time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) {
3813                                                 info->emu.pluscount = 0;
3814                                                 info->online = 0;
3815                                                 isdn_tty_modem_result(RESULT_OK, info);
3816                                         }
3817                                 }
3818                         }
3819         isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
3820 }
3821
3822 /*
3823  * Put a RING-message to all modem-channels who have the RI-bit set.
3824  * This function is called every second via timer-interrupt from within
3825  * timer-dispatcher isdn_timer_function()
3826  */
3827 void
3828 isdn_tty_modem_ring(void)
3829 {
3830         int ton = 0;
3831         int i;
3832
3833         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3834                 modem_info *info = &dev->mdm.info[i];
3835                 if (info->msr & UART_MSR_RI) {
3836                         ton = 1;
3837                         isdn_tty_modem_result(RESULT_RING, info);
3838                 }
3839         }
3840         isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton);
3841 }
3842
3843 /*
3844  * For all online tty's, try sending data to
3845  * the lower levels.
3846  */
3847 void
3848 isdn_tty_modem_xmit(void)
3849 {
3850         int ton = 1;
3851         int i;
3852
3853         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3854                 modem_info *info = &dev->mdm.info[i];
3855                 if (info->online) {
3856                         ton = 1;
3857                         isdn_tty_senddown(info);
3858                         isdn_tty_tint(info);
3859                 }
3860         }
3861         isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton);
3862 }
3863
3864 /*
3865  * Check all channels if we have a 'no carrier' timeout.
3866  * Timeout value is set by Register S7.
3867  */
3868 void
3869 isdn_tty_carrier_timeout(void)
3870 {
3871         int ton = 0;
3872         int i;
3873
3874         for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3875                 modem_info *info = &dev->mdm.info[i];
3876                 if (info->dialing) {
3877                         if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
3878                                 info->dialing = 0;
3879                                 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3880                                 isdn_tty_modem_hup(info, 1);
3881                         }
3882                         else
3883                                 ton = 1;
3884                 }
3885         }
3886         isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
3887 }